614 lines
16 KiB
C
614 lines
16 KiB
C
/*
|
||
* Copyright (c) 2019-2025 Allwinner Technology Co., Ltd. ALL rights reserved.
|
||
*
|
||
* Allwinner is a trademark of Allwinner Technology Co.,Ltd., registered in
|
||
* the the People's Republic of China and other countries.
|
||
* All Allwinner Technology Co.,Ltd. trademarks are used with permission.
|
||
*
|
||
* DISCLAIMER
|
||
* THIRD PARTY LICENCES MAY BE REQUIRED TO IMPLEMENT THE SOLUTION/PRODUCT.
|
||
* IF YOU NEED TO INTEGRATE THIRD PARTY’S TECHNOLOGY (SONY, DTS, DOLBY, AVS OR MPEGLA, ETC.)
|
||
* IN ALLWINNERS’SDK OR PRODUCTS, YOU SHALL BE SOLELY RESPONSIBLE TO OBTAIN
|
||
* ALL APPROPRIATELY REQUIRED THIRD PARTY LICENCES.
|
||
* ALLWINNER SHALL HAVE NO WARRANTY, INDEMNITY OR OTHER OBLIGATIONS WITH RESPECT TO MATTERS
|
||
* COVERED UNDER ANY REQUIRED THIRD PARTY LICENSE.
|
||
* YOU ARE SOLELY RESPONSIBLE FOR YOUR USAGE OF THIRD PARTY’S TECHNOLOGY.
|
||
*
|
||
*
|
||
* THIS SOFTWARE IS PROVIDED BY ALLWINNER"AS IS" AND TO THE MAXIMUM EXTENT
|
||
* PERMITTED BY LAW, ALLWINNER EXPRESSLY DISCLAIMS ALL WARRANTIES OF ANY KIND,
|
||
* WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING WITHOUT LIMITATION REGARDING
|
||
* THE TITLE, NON-INFRINGEMENT, ACCURACY, CONDITION, COMPLETENESS, PERFORMANCE
|
||
* OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
|
||
* IN NO EVENT SHALL ALLWINNER BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
||
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||
* LOSS OF USE, DATA, OR PROFITS, OR BUSINESS INTERRUPTION)
|
||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||
*/
|
||
|
||
//#include <common.h>
|
||
#include <typedef.h>
|
||
#include <stdio.h>
|
||
#include <stdlib.h>
|
||
#include <stdint.h>
|
||
#include <string.h>
|
||
#include <hal_thread.h>
|
||
#include <sunxi_hal_common.h>
|
||
#include <sunxi_hal_miiphy.h>
|
||
#include <sunxi_hal_phy.h>
|
||
|
||
//#include <asm/types.h>
|
||
//#include <list.h>
|
||
#include <hal_mem.h>
|
||
//#include <net.h>
|
||
|
||
/* local debug macro */
|
||
#undef MII_DEBUG
|
||
|
||
#undef debug
|
||
#ifdef MII_DEBUG
|
||
#define debug(fmt, args...) printf(fmt, ##args)
|
||
#else
|
||
#define debug(fmt, args...)
|
||
#endif /* MII_DEBUG */
|
||
|
||
static struct list_head mii_devs;
|
||
static struct mii_dev *current_mii;
|
||
|
||
/*
|
||
* Lookup the mii_dev struct by the registered device name.
|
||
*/
|
||
struct mii_dev *miiphy_get_dev_by_name(const char *devname)
|
||
{
|
||
struct list_head *entry;
|
||
struct mii_dev *dev;
|
||
|
||
if (!devname) {
|
||
printf("NULL device name!\n");
|
||
return NULL;
|
||
}
|
||
|
||
list_for_each(entry, &mii_devs) {
|
||
dev = list_entry(entry, struct mii_dev, link);
|
||
if (strcmp(dev->name, devname) == 0)
|
||
return dev;
|
||
}
|
||
|
||
return NULL;
|
||
}
|
||
|
||
/*****************************************************************************
|
||
*
|
||
* Initialize global data. Need to be called before any other miiphy routine.
|
||
*/
|
||
void miiphy_init(void)
|
||
{
|
||
INIT_LIST_HEAD(&mii_devs);
|
||
current_mii = NULL;
|
||
}
|
||
|
||
static int legacy_miiphy_read(struct mii_dev *bus, int addr, int devad, int reg)
|
||
{
|
||
unsigned short val;
|
||
int ret;
|
||
struct legacy_mii_dev *ldev = bus->priv;
|
||
|
||
ret = ldev->read(bus->name, addr, reg, &val);
|
||
|
||
return ret ? -1 : (int)val;
|
||
}
|
||
|
||
static int legacy_miiphy_write(struct mii_dev *bus, int addr, int devad,
|
||
int reg, uint16_t val)
|
||
{
|
||
struct legacy_mii_dev *ldev = bus->priv;
|
||
|
||
return ldev->write(bus->name, addr, reg, val);
|
||
}
|
||
|
||
/*****************************************************************************
|
||
*
|
||
* Register read and write MII access routines for the device <name>.
|
||
* This API is now deprecated. Please use mdio_alloc and mdio_register, instead.
|
||
*/
|
||
void miiphy_register(const char *name,
|
||
int (*read)(const char *devname, unsigned char addr,
|
||
unsigned char reg, unsigned short *value),
|
||
int (*write)(const char *devname, unsigned char addr,
|
||
unsigned char reg, unsigned short value))
|
||
{
|
||
struct mii_dev *new_dev;
|
||
struct legacy_mii_dev *ldev;
|
||
|
||
BUG_ON(strlen(name) >= MDIO_NAME_LEN);
|
||
|
||
/* check if we have unique name */
|
||
new_dev = miiphy_get_dev_by_name(name);
|
||
if (new_dev) {
|
||
printf("miiphy_register: non unique device name '%s'\n", name);
|
||
return;
|
||
}
|
||
|
||
/* allocate memory */
|
||
new_dev = mdio_alloc();
|
||
ldev = malloc(sizeof(*ldev));
|
||
|
||
if (new_dev == NULL || ldev == NULL) {
|
||
printf("miiphy_register: cannot allocate memory for '%s'\n",
|
||
name);
|
||
return;
|
||
}
|
||
|
||
/* initalize mii_dev struct fields */
|
||
new_dev->read = legacy_miiphy_read;
|
||
new_dev->write = legacy_miiphy_write;
|
||
strncpy(new_dev->name, name, MDIO_NAME_LEN);
|
||
new_dev->name[MDIO_NAME_LEN - 1] = 0;
|
||
ldev->read = read;
|
||
ldev->write = write;
|
||
new_dev->priv = ldev;
|
||
|
||
printf("miiphy_register: added '%s', read=0x%08lx, write=0x%08lx\n",
|
||
new_dev->name, ldev->read, ldev->write);
|
||
|
||
/* add it to the list */
|
||
list_add_tail(&new_dev->link, &mii_devs);
|
||
|
||
if (!current_mii)
|
||
current_mii = new_dev;
|
||
}
|
||
|
||
struct mii_dev *mdio_alloc(void)
|
||
{
|
||
struct mii_dev *bus;
|
||
|
||
bus = malloc(sizeof(*bus));
|
||
if (!bus)
|
||
return bus;
|
||
|
||
memset(bus, 0, sizeof(*bus));
|
||
|
||
/* initalize mii_dev struct fields */
|
||
INIT_LIST_HEAD(&bus->link);
|
||
|
||
return bus;
|
||
}
|
||
|
||
int mdio_register(struct mii_dev *bus)
|
||
{
|
||
if (!bus || !bus->name || !bus->read || !bus->write)
|
||
return -1;
|
||
|
||
/* check if we have unique name */
|
||
if (miiphy_get_dev_by_name(bus->name)) {
|
||
printf("mdio_register: non unique device name '%s'\n",
|
||
bus->name);
|
||
return -1;
|
||
}
|
||
|
||
/* add it to the list */
|
||
list_add_tail(&bus->link, &mii_devs);
|
||
|
||
if (!current_mii)
|
||
current_mii = bus;
|
||
|
||
return 0;
|
||
}
|
||
|
||
void mdio_list_devices(void)
|
||
{
|
||
struct list_head *entry;
|
||
|
||
list_for_each(entry, &mii_devs) {
|
||
int i;
|
||
struct mii_dev *bus = list_entry(entry, struct mii_dev, link);
|
||
|
||
printf("%s:\n", bus->name);
|
||
|
||
for (i = 0; i < PHY_MAX_ADDR; i++) {
|
||
struct phy_device *phydev = bus->phymap[i];
|
||
|
||
if (phydev) {
|
||
printf("%d - %s", i, phydev->drv->name);
|
||
|
||
if (phydev->dev)
|
||
printf(" <--> %s\n", "eth0");
|
||
else
|
||
printf("\n");
|
||
}
|
||
}
|
||
}
|
||
}
|
||
|
||
int miiphy_set_current_dev(const char *devname)
|
||
{
|
||
struct mii_dev *dev;
|
||
|
||
dev = miiphy_get_dev_by_name(devname);
|
||
if (dev) {
|
||
current_mii = dev;
|
||
return 0;
|
||
}
|
||
|
||
printf("No such device: %s\n", devname);
|
||
|
||
return 1;
|
||
}
|
||
|
||
struct mii_dev *mdio_get_current_dev(void)
|
||
{
|
||
return current_mii;
|
||
}
|
||
|
||
struct phy_device *mdio_phydev_for_ethname(const char *ethname)
|
||
{
|
||
struct list_head *entry;
|
||
struct mii_dev *bus;
|
||
|
||
list_for_each(entry, &mii_devs) {
|
||
int i;
|
||
bus = list_entry(entry, struct mii_dev, link);
|
||
|
||
for (i = 0; i < PHY_MAX_ADDR; i++) {
|
||
if (!bus->phymap[i] || !bus->phymap[i]->dev)
|
||
continue;
|
||
|
||
/*if (strcmp(bus->phymap[i]->dev->name, ethname) == 0)
|
||
return bus->phymap[i];*/
|
||
}
|
||
}
|
||
|
||
printf("%s is not a known ethernet\n", ethname);
|
||
return NULL;
|
||
}
|
||
|
||
const char *miiphy_get_current_dev(void)
|
||
{
|
||
if (current_mii)
|
||
return current_mii->name;
|
||
|
||
return NULL;
|
||
}
|
||
|
||
static struct mii_dev *miiphy_get_active_dev(const char *devname)
|
||
{
|
||
/* If the current mii is the one we want, return it */
|
||
if (current_mii)
|
||
if (strcmp(current_mii->name, devname) == 0)
|
||
return current_mii;
|
||
|
||
/* Otherwise, set the active one to the one we want */
|
||
if (miiphy_set_current_dev(devname))
|
||
return NULL;
|
||
else
|
||
return current_mii;
|
||
}
|
||
|
||
/*****************************************************************************
|
||
*
|
||
* Read to variable <value> from the PHY attached to device <devname>,
|
||
* use PHY address <addr> and register <reg>.
|
||
*
|
||
* This API is deprecated. Use phy_read on a phy_device found via phy_connect
|
||
*
|
||
* Returns:
|
||
* 0 on success
|
||
*/
|
||
int miiphy_read(const char *devname, unsigned char addr, unsigned char reg,
|
||
unsigned short *value)
|
||
{
|
||
struct mii_dev *bus;
|
||
int ret;
|
||
|
||
bus = miiphy_get_active_dev(devname);
|
||
if (!bus)
|
||
return 1;
|
||
|
||
ret = bus->read(bus, addr, MDIO_DEVAD_NONE, reg);
|
||
if (ret < 0)
|
||
return 1;
|
||
|
||
*value = (unsigned short)ret;
|
||
return 0;
|
||
}
|
||
|
||
/*****************************************************************************
|
||
*
|
||
* Write <value> to the PHY attached to device <devname>,
|
||
* use PHY address <addr> and register <reg>.
|
||
*
|
||
* This API is deprecated. Use phy_write on a phy_device found by phy_connect
|
||
*
|
||
* Returns:
|
||
* 0 on success
|
||
*/
|
||
int miiphy_write(const char *devname, unsigned char addr, unsigned char reg,
|
||
unsigned short value)
|
||
{
|
||
struct mii_dev *bus;
|
||
|
||
bus = miiphy_get_active_dev(devname);
|
||
if (bus)
|
||
return bus->write(bus, addr, MDIO_DEVAD_NONE, reg, value);
|
||
|
||
return 1;
|
||
}
|
||
|
||
/*****************************************************************************
|
||
*
|
||
* Print out list of registered MII capable devices.
|
||
*/
|
||
void miiphy_listdev(void)
|
||
{
|
||
struct list_head *entry;
|
||
struct mii_dev *dev;
|
||
|
||
puts("MII devices: ");
|
||
list_for_each(entry, &mii_devs) {
|
||
dev = list_entry(entry, struct mii_dev, link);
|
||
printf("'%s' ", dev->name);
|
||
}
|
||
puts("\n");
|
||
|
||
if (current_mii)
|
||
printf("Current device: '%s'\n", current_mii->name);
|
||
}
|
||
|
||
/*****************************************************************************
|
||
*
|
||
* Read the OUI, manufacture's model number, and revision number.
|
||
*
|
||
* OUI: 22 bits (unsigned int)
|
||
* Model: 6 bits (unsigned char)
|
||
* Revision: 4 bits (unsigned char)
|
||
*
|
||
* This API is deprecated.
|
||
*
|
||
* Returns:
|
||
* 0 on success
|
||
*/
|
||
int miiphy_info(const char *devname, unsigned char addr, unsigned int *oui,
|
||
unsigned char *model, unsigned char *rev)
|
||
{
|
||
unsigned int reg = 0;
|
||
unsigned short tmp;
|
||
|
||
if (miiphy_read(devname, addr, MII_PHYSID2, &tmp) != 0) {
|
||
printf("PHY ID register 2 read failed\n");
|
||
return -1;
|
||
}
|
||
reg = tmp;
|
||
|
||
printf("MII_PHYSID2 @ 0x%x = 0x%04x\n", addr, reg);
|
||
|
||
if (reg == 0xFFFF) {
|
||
/* No physical device present at this address */
|
||
return -1;
|
||
}
|
||
|
||
if (miiphy_read(devname, addr, MII_PHYSID1, &tmp) != 0) {
|
||
printf("PHY ID register 1 read failed\n");
|
||
return -1;
|
||
}
|
||
reg |= tmp << 16;
|
||
printf("PHY_PHYIDR[1,2] @ 0x%x = 0x%08x\n", addr, reg);
|
||
|
||
*oui = (reg >> 10);
|
||
*model = (unsigned char)((reg >> 4) & 0x0000003F);
|
||
*rev = (unsigned char)(reg & 0x0000000F);
|
||
return 0;
|
||
}
|
||
|
||
#ifndef CONFIG_PHYLIB
|
||
/*****************************************************************************
|
||
*
|
||
* Reset the PHY.
|
||
*
|
||
* This API is deprecated. Use PHYLIB.
|
||
*
|
||
* Returns:
|
||
* 0 on success
|
||
*/
|
||
#if 0
|
||
int miiphy_reset(const char *devname, unsigned char addr)
|
||
{
|
||
unsigned short reg;
|
||
int timeout = 500;
|
||
|
||
if (miiphy_read(devname, addr, MII_BMCR, ®) != 0) {
|
||
printf("PHY status read failed\n");
|
||
return -1;
|
||
}
|
||
if (miiphy_write(devname, addr, MII_BMCR, reg | BMCR_RESET) != 0) {
|
||
printf("PHY reset failed\n");
|
||
return -1;
|
||
}
|
||
#ifdef CONFIG_PHY_RESET_DELAY
|
||
udelay(CONFIG_PHY_RESET_DELAY); /* Intel LXT971A needs this */
|
||
#endif
|
||
/*
|
||
* Poll the control register for the reset bit to go to 0 (it is
|
||
* auto-clearing). This should happen within 0.5 seconds per the
|
||
* IEEE spec.
|
||
*/
|
||
reg = 0x8000;
|
||
while (((reg & 0x8000) != 0) && timeout--) {
|
||
if (miiphy_read(devname, addr, MII_BMCR, ®) != 0) {
|
||
printf("PHY status read failed\n");
|
||
return -1;
|
||
}
|
||
udelay(1000);
|
||
}
|
||
if ((reg & 0x8000) == 0) {
|
||
return 0;
|
||
} else {
|
||
printf("PHY reset timed out\n");
|
||
return -1;
|
||
}
|
||
return 0;
|
||
}
|
||
#endif
|
||
#endif /* !PHYLIB */
|
||
|
||
/*****************************************************************************
|
||
*
|
||
* Determine the ethernet speed (10/100/1000). Return 10 on error.
|
||
*/
|
||
int miiphy_speed(const char *devname, unsigned char addr)
|
||
{
|
||
uint16_t bmcr, anlpar;
|
||
|
||
#if defined(CONFIG_PHY_GIGE)
|
||
uint16_t btsr;
|
||
|
||
/*
|
||
* Check for 1000BASE-X. If it is supported, then assume that the speed
|
||
* is 1000.
|
||
*/
|
||
if (miiphy_is_1000base_x(devname, addr))
|
||
return _1000BASET;
|
||
|
||
/*
|
||
* No 1000BASE-X, so assume 1000BASE-T/100BASE-TX/10BASE-T register set.
|
||
*/
|
||
/* Check for 1000BASE-T. */
|
||
if (miiphy_read(devname, addr, MII_STAT1000, &btsr)) {
|
||
printf("PHY 1000BT status");
|
||
goto miiphy_read_failed;
|
||
}
|
||
if (btsr != 0xFFFF &&
|
||
(btsr & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD)))
|
||
return _1000BASET;
|
||
#endif /* CONFIG_PHY_GIGE */
|
||
|
||
/* Check Basic Management Control Register first. */
|
||
if (miiphy_read(devname, addr, MII_BMCR, &bmcr)) {
|
||
printf("PHY speed");
|
||
goto miiphy_read_failed;
|
||
}
|
||
/* Check if auto-negotiation is on. */
|
||
if (bmcr & BMCR_ANENABLE) {
|
||
/* Get auto-negotiation results. */
|
||
if (miiphy_read(devname, addr, MII_LPA, &anlpar)) {
|
||
printf("PHY AN speed");
|
||
goto miiphy_read_failed;
|
||
}
|
||
return (anlpar & LPA_100) ? _100BASET : _10BASET;
|
||
}
|
||
/* Get speed from basic control settings. */
|
||
return (bmcr & BMCR_SPEED100) ? _100BASET : _10BASET;
|
||
|
||
miiphy_read_failed:
|
||
printf(" read failed, assuming 10BASE-T\n");
|
||
return _10BASET;
|
||
}
|
||
|
||
/*****************************************************************************
|
||
*
|
||
* Determine full/half duplex. Return half on error.
|
||
*/
|
||
int miiphy_duplex(const char *devname, unsigned char addr)
|
||
{
|
||
uint16_t bmcr, anlpar;
|
||
|
||
#if defined(CONFIG_PHY_GIGE)
|
||
uint16_t btsr;
|
||
|
||
/* Check for 1000BASE-X. */
|
||
if (miiphy_is_1000base_x(devname, addr)) {
|
||
/* 1000BASE-X */
|
||
if (miiphy_read(devname, addr, MII_LPA, &anlpar)) {
|
||
printf("1000BASE-X PHY AN duplex");
|
||
goto miiphy_read_failed;
|
||
}
|
||
}
|
||
/*
|
||
* No 1000BASE-X, so assume 1000BASE-T/100BASE-TX/10BASE-T register set.
|
||
*/
|
||
/* Check for 1000BASE-T. */
|
||
if (miiphy_read(devname, addr, MII_STAT1000, &btsr)) {
|
||
printf("PHY 1000BT status");
|
||
goto miiphy_read_failed;
|
||
}
|
||
if (btsr != 0xFFFF) {
|
||
if (btsr & PHY_1000BTSR_1000FD) {
|
||
return FULL;
|
||
} else if (btsr & PHY_1000BTSR_1000HD) {
|
||
return HALF;
|
||
}
|
||
}
|
||
#endif /* CONFIG_PHY_GIGE */
|
||
|
||
/* Check Basic Management Control Register first. */
|
||
if (miiphy_read(devname, addr, MII_BMCR, &bmcr)) {
|
||
printf("PHY duplex");
|
||
goto miiphy_read_failed;
|
||
}
|
||
/* Check if auto-negotiation is on. */
|
||
if (bmcr & BMCR_ANENABLE) {
|
||
/* Get auto-negotiation results. */
|
||
if (miiphy_read(devname, addr, MII_LPA, &anlpar)) {
|
||
printf("PHY AN duplex");
|
||
goto miiphy_read_failed;
|
||
}
|
||
return (anlpar & (LPA_10FULL | LPA_100FULL)) ?
|
||
FULL : HALF;
|
||
}
|
||
/* Get speed from basic control settings. */
|
||
return (bmcr & BMCR_FULLDPLX) ? FULL : HALF;
|
||
|
||
miiphy_read_failed:
|
||
printf(" read failed, assuming half duplex\n");
|
||
return HALF;
|
||
}
|
||
|
||
/*****************************************************************************
|
||
*
|
||
* Return 1 if PHY supports 1000BASE-X, 0 if PHY supports 10BASE-T/100BASE-TX/
|
||
* 1000BASE-T, or on error.
|
||
*/
|
||
int miiphy_is_1000base_x(const char *devname, unsigned char addr)
|
||
{
|
||
#if defined(CONFIG_PHY_GIGE)
|
||
uint16_t exsr;
|
||
|
||
if (miiphy_read(devname, addr, MII_ESTATUS, &exsr)) {
|
||
printf("PHY extended status read failed, assuming no "
|
||
"1000BASE-X\n");
|
||
return 0;
|
||
}
|
||
return 0 != (exsr & (ESTATUS_1000XF | ESTATUS_1000XH));
|
||
#else
|
||
return 0;
|
||
#endif
|
||
}
|
||
|
||
#ifdef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
|
||
/*****************************************************************************
|
||
*
|
||
* Determine link status
|
||
*/
|
||
int miiphy_link(const char *devname, unsigned char addr)
|
||
{
|
||
unsigned short reg;
|
||
|
||
/* dummy read; needed to latch some phys */
|
||
(void)miiphy_read(devname, addr, MII_BMSR, ®);
|
||
if (miiphy_read(devname, addr, MII_BMSR, ®)) {
|
||
printf("MII_BMSR read failed, assuming no link\n");
|
||
return 0;
|
||
}
|
||
|
||
/* Determine if a link is active */
|
||
if ((reg & BMSR_LSTATUS) != 0) {
|
||
return 1;
|
||
} else {
|
||
return 0;
|
||
}
|
||
}
|
||
#endif
|