rt-thread/bsp/efm32/EFM32_Gxxx_DK/dvk_spi.c

263 lines
9.5 KiB
C

/**************************************************************************//**
* @file
* @brief SPI implementation of Board Control interface
* This implementation use the USART2 SPI interface to control board
* control registers. It works
* @author Energy Micro AS
* @version 1.7.3
******************************************************************************
* @section License
* <b>(C) Copyright 2010 Energy Micro AS, http://www.energymicro.com</b>
******************************************************************************
*
* This source code is the property of Energy Micro AS. The source and compiled
* code may only be used on Energy Micro "EFM32" microcontrollers.
*
* This copyright notice may not be removed from the source code nor changed.
*
* DISCLAIMER OF WARRANTY/LIMITATION OF REMEDIES: Energy Micro AS has no
* obligation to support this Software. Energy Micro AS is providing the
* Software "AS IS", with no express or implied warranties of any kind,
* including, but not limited to, any implied warranties of merchantability
* or fitness for any particular purpose or warranties against infringement
* of any proprietary rights of a third party.
*
* Energy Micro AS will not be liable for any consequential, incidental, or
* special damages, or any other relief, or for any claim by any third party,
* arising from your use of this Software.
*
*****************************************************************************/
/***************************************************************************//**
* @addtogroup BSP
* @{
******************************************************************************/
#include <stdio.h>
#include "efm32.h"
#include "efm32_usart.h"
#include "efm32_gpio.h"
#include "efm32_cmu.h"
#include "dvk.h"
#include "dvk_bcregisters.h"
#ifdef _EFM32_TINY_FAMILY
/* USART used for SPI access */
#define USART_USED USART0
#define USART_CLK cmuClock_USART0
/* GPIO pins used, please refer to DVK user guide. */
#define PIN_SPIBUS_CONNECT 13
#define PORT_SPIBUS_CONNECT gpioPortC
#define PIN_SPI_TX 10
#define PORT_SPI_TX gpioPortE
#define PIN_SPI_RX 11
#define PORT_SPI_RX gpioPortE
#define PIN_SPI_CLK 12
#define PORT_SPI_CLK gpioPortE
#define PIN_SPI_CS 13
#define PORT_SPI_CS gpioPortE
#else
/* USART used for SPI access */
#define USART_USED USART2
#define USART_CLK cmuClock_USART2
/* GPIO pins used, please refer to DVK user guide. */
#define PIN_SPIBUS_CONNECT 13
#define PORT_SPIBUS_CONNECT gpioPortC
#define PIN_EBIBUS_CONNECT 12
#define PORT_EBIBUS_CONNECT gpioPortC
#define PIN_SPI_TX 2
#define PORT_SPI_TX gpioPortC
#define PIN_SPI_RX 3
#define PORT_SPI_RX gpioPortC
#define PIN_SPI_CLK 4
#define PORT_SPI_CLK gpioPortC
#define PIN_SPI_CS 5
#define PORT_SPI_CS gpioPortC
#endif
static volatile uint16_t *lastAddr = NULL;
/**************************************************************************//**
* @brief Initializes SPI interface for access to FPGA registers
* for board control
*****************************************************************************/
static void spiInit(void)
{
USART_InitSync_TypeDef init = USART_INITSYNC_DEFAULT;
/* Enable module clocks */
CMU_ClockEnable(cmuClock_GPIO, true);
CMU_ClockEnable(cmuClock_HFPER, true);
CMU_ClockEnable(USART_CLK, true);
/* Configure SPI bus connect pins, DOUT set to 0, disable EBI */
GPIO_PinModeSet(PORT_SPIBUS_CONNECT, PIN_SPIBUS_CONNECT, gpioModePushPull, 0);
GPIO_PinModeSet(PORT_EBIBUS_CONNECT, PIN_EBIBUS_CONNECT, gpioModePushPull, 1);
/* Configure SPI pins */
GPIO_PinModeSet(PORT_SPI_TX, PIN_SPI_TX, gpioModePushPull, 0);
GPIO_PinModeSet(PORT_SPI_RX, PIN_SPI_RX, gpioModePushPull, 0);
GPIO_PinModeSet(PORT_SPI_CLK, PIN_SPI_CLK, gpioModePushPull, 0);
/* Keep CS high to not activate slave */
GPIO_PinModeSet(PORT_SPI_CS, PIN_SPI_CS, gpioModePushPull, 1);
/* Configure to use SPI master with manual CS */
/* For now, configure SPI for worst case 32MHz clock in order to work for all */
/* configurations. */
init.refFreq = 32000000;
init.baudrate = 7000000;
USART_InitSync(USART_USED, &init);
/* Enable pins at default location */
USART_USED->ROUTE = USART_ROUTE_TXPEN | USART_ROUTE_RXPEN | USART_ROUTE_CLKPEN;
}
/**************************************************************************//**
* @brief Disables GPIO pins and USART from FPGA register access
*****************************************************************************/
static void spiDisable(void)
{
USART_Reset(USART_USED);
/* Disable LCD_SELECT */
GPIO_PinModeSet(gpioPortD, 13, gpioModeDisabled, 0);
/* Disable SPI pins */
GPIO_PinModeSet(PORT_SPIBUS_CONNECT, 13, gpioModeDisabled, 0);
GPIO_PinModeSet(PORT_SPIBUS_CONNECT, 12, gpioModeDisabled, 0);
GPIO_PinModeSet(PORT_SPI_TX, PIN_SPI_TX, gpioModeDisabled, 0);
GPIO_PinModeSet(PORT_SPI_RX, PIN_SPI_RX, gpioModeDisabled, 0);
GPIO_PinModeSet(PORT_SPI_CLK, PIN_SPI_CLK, gpioModeDisabled, 0);
GPIO_PinModeSet(PORT_SPI_CS, PIN_SPI_CS, gpioModeDisabled, 0);
/* Disable USART clock - we can't disable GPIO or HFPER as we don't know who else
* might be using it */
CMU_ClockEnable(USART_CLK, false);
}
/**************************************************************************//**
* @brief Perform SPI Transfer
*****************************************************************************/
static uint16_t spiAccess(uint8_t spiaddr, uint8_t rw, uint16_t spidata)
{
uint16_t tmp;
GPIO_PinOutClear(PORT_SPI_CS, PIN_SPI_CS);
/* For every byte sent, one is received */
/* Write SPI address */
USART_Tx(USART_USED, (spiaddr & 0x3) | rw << 3);
/* Just ignore data read back */
USART_Rx(USART_USED);
/* SPI data LSB */
USART_Tx(USART_USED, spidata & 0xFF);
tmp = (uint16_t)USART_Rx(USART_USED);
/* SPI data MSB */
USART_Tx(USART_USED, spidata >> 8);
tmp |= (uint16_t)USART_Rx(USART_USED) << 8;
GPIO_PinOutSet(PORT_SPI_CS, PIN_SPI_CS);
return tmp;
}
/**************************************************************************//**
* @brief Performs SPI write to FPGA register
* @param spiadr Address of register
* @param spidata Data to write
*****************************************************************************/
static void spiWrite(uint8_t spiadr, uint16_t spidata)
{
spiAccess(spiadr, 0, spidata);
}
/**************************************************************************//**
* @brief Performs SPI read from FPGA register
* @param spiadr Address of register
* @param spidata Dummy data
*****************************************************************************/
static uint16_t spiRead(uint8_t spiadr, uint16_t spidata)
{
return spiAccess(spiadr, 1, spidata);
}
/**************************************************************************//**
* @brief Initializes DVK register access
* @return true on success, false on failure
*****************************************************************************/
bool DVK_SPI_init(void)
{
uint16_t spiMagic;
spiInit();
/* Read "board control Magic" register to verify SPI is up and running */
/* if not FPGA is configured to be in EBI mode */
spiMagic = DVK_SPI_readRegister(BC_MAGIC);
if(spiMagic != BC_MAGIC_VALUE)
{
return false;
}
else
{
return true;
}
}
/**************************************************************************//**
* @brief Disable and free up resources used by SPI board control access
*****************************************************************************/
void DVK_SPI_disable(void)
{
spiDisable();
}
/**************************************************************************//**
* @brief Perform read from DVK board control register
* @param addr Address of register to read from
*****************************************************************************/
uint16_t DVK_SPI_readRegister(volatile uint16_t *addr)
{
uint16_t data;
if (addr != lastAddr)
{
spiWrite(0x00, 0xFFFF & ((uint32_t) addr)); /*LSBs of address*/
spiWrite(0x01, 0xFF & ((uint32_t) addr >> 16)); /*MSBs of address*/
spiWrite(0x02, (0x0C000000 & (uint32_t) addr) >> 26); /*Chip select*/
}
/* Read twice */
data = spiRead(0x03, 0);
data = spiRead(0x03, 0);
lastAddr = addr;
return data;
}
/**************************************************************************//**
* @brief Perform write to DVK board control register
* @param addr Address of register to write to
* @param data 16-bit to write into register
*****************************************************************************/
void DVK_SPI_writeRegister(volatile uint16_t *addr, uint16_t data)
{
if (addr != lastAddr)
{
spiWrite(0x00, 0xFFFF & ((uint32_t) addr)); /*LSBs of address*/
spiWrite(0x01, 0xFF & ((uint32_t) addr >> 16)); /*MSBs of address*/
spiWrite(0x02, (0x0C000000 & (uint32_t) addr) >> 26); /*Chip select*/
}
spiWrite(0x03, data); /*Data*/
lastAddr = addr;
}
/** @} (end group BSP) */