115 lines
3.5 KiB
C
115 lines
3.5 KiB
C
/*
|
|
* Copyright (c) 2006-2020, RT-Thread Development Team
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*
|
|
* Change Logs:
|
|
* Date Author Notes
|
|
* 2020-04-05 bigmagic Initial version
|
|
*/
|
|
|
|
#ifndef _DRV_UART_H__
|
|
#define _DRV_UART_H__
|
|
|
|
#include "ls2k1000.h"
|
|
#include <rthw.h>
|
|
|
|
/* UART registers */
|
|
#define UART_DAT(base) HWREG8(base + 0x00)
|
|
#define UART_IER(base) HWREG8(base + 0x01)
|
|
#define UART_IIR(base) HWREG8(base + 0x02)
|
|
#define UART_FCR(base) HWREG8(base + 0x02)
|
|
#define UART_LCR(base) HWREG8(base + 0x03)
|
|
#define UART_MCR(base) HWREG8(base + 0x04)
|
|
#define UART_LSR(base) HWREG8(base + 0x05)
|
|
#define UART_MSR(base) HWREG8(base + 0x06)
|
|
|
|
#define UART_LSB(base) HWREG8(base + 0x00)
|
|
#define UART_MSB(base) HWREG8(base + 0x01)
|
|
|
|
/* interrupt enable register */
|
|
#define IER_IRxE 0x1
|
|
#define IER_ITxE 0x2
|
|
#define IER_ILE 0x4
|
|
#define IER_IME 0x8
|
|
|
|
/* interrupt identification register */
|
|
#define IIR_IMASK 0xf /* mask */
|
|
#define IIR_RXTOUT 0xc /* receive timeout */
|
|
#define IIR_RLS 0x6 /* receive line status */
|
|
#define IIR_RXRDY 0x4 /* receive ready */
|
|
#define IIR_TXRDY 0x2 /* transmit ready */
|
|
#define IIR_NOPEND 0x1 /* nothing */
|
|
#define IIR_MLSC 0x0 /* modem status */
|
|
#define IIR_FIFO_MASK 0xc0 /* set if FIFOs are enabled */
|
|
|
|
/* fifo control register */
|
|
#define FIFO_ENABLE 0x01 /* enable fifo */
|
|
#define FIFO_RCV_RST 0x02 /* reset receive fifo */
|
|
#define FIFO_XMT_RST 0x04 /* reset transmit fifo */
|
|
#define FIFO_DMA_MODE 0x08 /* enable dma mode */
|
|
#define FIFO_TRIGGER_1 0x00 /* trigger at 1 char */
|
|
#define FIFO_TRIGGER_4 0x40 /* trigger at 4 chars */
|
|
#define FIFO_TRIGGER_8 0x80 /* trigger at 8 chars */
|
|
#define FIFO_TRIGGER_14 0xc0 /* trigger at 14 chars */
|
|
|
|
// 线路控制寄存器
|
|
/* character format control register */
|
|
#define CFCR_DLAB 0x80 /* divisor latch */
|
|
#define CFCR_SBREAK 0x40 /* send break */
|
|
#define CFCR_PZERO 0x30 /* zero parity */
|
|
#define CFCR_PONE 0x20 /* one parity */
|
|
#define CFCR_PEVEN 0x10 /* even parity */
|
|
#define CFCR_PODD 0x00 /* odd parity */
|
|
#define CFCR_PENAB 0x08 /* parity enable */
|
|
#define CFCR_STOPB 0x04 /* 2 stop bits */
|
|
#define CFCR_8BITS 0x03 /* 8 data bits */
|
|
#define CFCR_7BITS 0x02 /* 7 data bits */
|
|
#define CFCR_6BITS 0x01 /* 6 data bits */
|
|
#define CFCR_5BITS 0x00 /* 5 data bits */
|
|
|
|
/* modem control register */
|
|
#define MCR_LOOPBACK 0x10 /* loopback */
|
|
#define MCR_IENABLE 0x08 /* output 2 = int enable */
|
|
#define MCR_DRS 0x04 /* output 1 = xxx */
|
|
#define MCR_RTS 0x02 /* enable RTS */
|
|
#define MCR_DTR 0x01 /* enable DTR */
|
|
|
|
/* line status register */
|
|
#define LSR_RCV_FIFO 0x80 /* error in receive fifo */
|
|
#define LSR_TSRE 0x40 /* transmitter empty */
|
|
#define LSR_TXRDY 0x20 /* transmitter ready */
|
|
#define LSR_BI 0x10 /* break detected */
|
|
#define LSR_FE 0x08 /* framing error */
|
|
#define LSR_PE 0x04 /* parity error */
|
|
#define LSR_OE 0x02 /* overrun error */
|
|
#define LSR_RXRDY 0x01 /* receiver ready */
|
|
#define LSR_RCV_MASK 0x1f
|
|
|
|
|
|
/* UART interrupt enable register value */
|
|
#define UARTIER_IME (1 << 3)
|
|
#define UARTIER_ILE (1 << 2)
|
|
#define UARTIER_ITXE (1 << 1)
|
|
#define UARTIER_IRXE (1 << 0)
|
|
|
|
/* UART line control register value */
|
|
#define UARTLCR_DLAB (1 << 7)
|
|
#define UARTLCR_BCB (1 << 6)
|
|
#define UARTLCR_SPB (1 << 5)
|
|
#define UARTLCR_EPS (1 << 4)
|
|
#define UARTLCR_PE (1 << 3)
|
|
#define UARTLCR_SB (1 << 2)
|
|
|
|
/* UART line status register value */
|
|
#define UARTLSR_ERROR (1 << 7)
|
|
#define UARTLSR_TE (1 << 6)
|
|
#define UARTLSR_TFE (1 << 5)
|
|
#define UARTLSR_BI (1 << 4)
|
|
#define UARTLSR_FE (1 << 3)
|
|
#define UARTLSR_PE (1 << 2)
|
|
#define UARTLSR_OE (1 << 1)
|
|
#define UARTLSR_DR (1 << 0)
|
|
|
|
#endif
|