1506 lines
59 KiB
C
1506 lines
59 KiB
C
/*
|
|
* The Clear BSD License
|
|
* Copyright (c) 2016, Freescale Semiconductor, Inc.
|
|
* Copyright 2016-2017 NXP
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted (subject to the limitations in the disclaimer below) provided
|
|
* that the following conditions are met:
|
|
*
|
|
* o Redistributions of source code must retain the above copyright notice, this list
|
|
* of conditions and the following disclaimer.
|
|
*
|
|
* o Redistributions in binary form must reproduce the above copyright notice, this
|
|
* list of conditions and the following disclaimer in the documentation and/or
|
|
* other materials provided with the distribution.
|
|
*
|
|
* o Neither the name of the copyright holder nor the names of its
|
|
* contributors may be used to endorse or promote products derived from this
|
|
* software without specific prior written permission.
|
|
*
|
|
* NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE GRANTED BY THIS LICENSE.
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
|
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
|
|
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
|
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
|
|
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
|
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
#ifndef _FSL_USDHC_H_
|
|
#define _FSL_USDHC_H_
|
|
|
|
#include "fsl_common.h"
|
|
|
|
/*!
|
|
* @addtogroup usdhc
|
|
* @{
|
|
*/
|
|
|
|
/******************************************************************************
|
|
* Definitions.
|
|
*****************************************************************************/
|
|
|
|
/*! @name Driver version */
|
|
/*@{*/
|
|
/*! @brief Driver version 2.2.3. */
|
|
#define FSL_USDHC_DRIVER_VERSION (MAKE_VERSION(2U, 2U, 3U))
|
|
/*@}*/
|
|
|
|
/*! @brief Maximum block count can be set one time */
|
|
#define USDHC_MAX_BLOCK_COUNT (USDHC_BLK_ATT_BLKCNT_MASK >> USDHC_BLK_ATT_BLKCNT_SHIFT)
|
|
|
|
/*! @brief USDHC status */
|
|
enum _usdhc_status
|
|
{
|
|
kStatus_USDHC_BusyTransferring = MAKE_STATUS(kStatusGroup_USDHC, 0U), /*!< Transfer is on-going */
|
|
kStatus_USDHC_PrepareAdmaDescriptorFailed = MAKE_STATUS(kStatusGroup_USDHC, 1U), /*!< Set DMA descriptor failed */
|
|
kStatus_USDHC_SendCommandFailed = MAKE_STATUS(kStatusGroup_USDHC, 2U), /*!< Send command failed */
|
|
kStatus_USDHC_TransferDataFailed = MAKE_STATUS(kStatusGroup_USDHC, 3U), /*!< Transfer data failed */
|
|
kStatus_USDHC_DMADataAddrNotAlign = MAKE_STATUS(kStatusGroup_USDHC, 4U), /*!< data address not align */
|
|
kStatus_USDHC_ReTuningRequest = MAKE_STATUS(kStatusGroup_USDHC, 5U), /*!< re-tuning request */
|
|
kStatus_USDHC_TuningError = MAKE_STATUS(kStatusGroup_USDHC, 6U), /*!< tuning error */
|
|
kStatus_USDHC_NotSupport = MAKE_STATUS(kStatusGroup_USDHC, 7U), /*!< not support */
|
|
};
|
|
|
|
/*! @brief Host controller capabilities flag mask */
|
|
enum _usdhc_capability_flag
|
|
{
|
|
kUSDHC_SupportAdmaFlag = USDHC_HOST_CTRL_CAP_ADMAS_MASK, /*!< Support ADMA */
|
|
kUSDHC_SupportHighSpeedFlag = USDHC_HOST_CTRL_CAP_HSS_MASK, /*!< Support high-speed */
|
|
kUSDHC_SupportDmaFlag = USDHC_HOST_CTRL_CAP_DMAS_MASK, /*!< Support DMA */
|
|
kUSDHC_SupportSuspendResumeFlag = USDHC_HOST_CTRL_CAP_SRS_MASK, /*!< Support suspend/resume */
|
|
kUSDHC_SupportV330Flag = USDHC_HOST_CTRL_CAP_VS33_MASK, /*!< Support voltage 3.3V */
|
|
kUSDHC_SupportV300Flag = USDHC_HOST_CTRL_CAP_VS30_MASK, /*!< Support voltage 3.0V */
|
|
kUSDHC_SupportV180Flag = USDHC_HOST_CTRL_CAP_VS18_MASK, /*!< Support voltage 1.8V */
|
|
/* Put additional two flags in HTCAPBLT_MBL's position. */
|
|
kUSDHC_Support4BitFlag = (USDHC_HOST_CTRL_CAP_MBL_SHIFT << 0U), /*!< Support 4 bit mode */
|
|
kUSDHC_Support8BitFlag = (USDHC_HOST_CTRL_CAP_MBL_SHIFT << 1U), /*!< Support 8 bit mode */
|
|
/* sd version 3.0 new feature */
|
|
kUSDHC_SupportDDR50Flag = USDHC_HOST_CTRL_CAP_DDR50_SUPPORT_MASK, /*!< support DDR50 mode */
|
|
|
|
#if defined(FSL_FEATURE_USDHC_HAS_SDR104_MODE) && (!FSL_FEATURE_USDHC_HAS_SDR104_MODE)
|
|
kUSDHC_SupportSDR104Flag = 0, /*!< not support SDR104 mode */
|
|
#else
|
|
kUSDHC_SupportSDR104Flag = USDHC_HOST_CTRL_CAP_SDR104_SUPPORT_MASK, /*!< support SDR104 mode */
|
|
#endif
|
|
#if defined(FSL_FEATURE_USDHC_HAS_SDR50_MODE) && (!FSL_FEATURE_USDHC_HAS_SDR50_MODE)
|
|
kUSDHC_SupportSDR50Flag = 0U, /*!< not support SDR50 mode */
|
|
#else
|
|
kUSDHC_SupportSDR50Flag = USDHC_HOST_CTRL_CAP_SDR50_SUPPORT_MASK, /*!< support SDR50 mode */
|
|
#endif
|
|
};
|
|
|
|
/*! @brief Wakeup event mask */
|
|
enum _usdhc_wakeup_event
|
|
{
|
|
kUSDHC_WakeupEventOnCardInt = USDHC_PROT_CTRL_WECINT_MASK, /*!< Wakeup on card interrupt */
|
|
kUSDHC_WakeupEventOnCardInsert = USDHC_PROT_CTRL_WECINS_MASK, /*!< Wakeup on card insertion */
|
|
kUSDHC_WakeupEventOnCardRemove = USDHC_PROT_CTRL_WECRM_MASK, /*!< Wakeup on card removal */
|
|
|
|
kUSDHC_WakeupEventsAll = (kUSDHC_WakeupEventOnCardInt | kUSDHC_WakeupEventOnCardInsert |
|
|
kUSDHC_WakeupEventOnCardRemove), /*!< All wakeup events */
|
|
};
|
|
|
|
/*! @brief Reset type mask */
|
|
enum _usdhc_reset
|
|
{
|
|
kUSDHC_ResetAll = USDHC_SYS_CTRL_RSTA_MASK, /*!< Reset all except card detection */
|
|
kUSDHC_ResetCommand = USDHC_SYS_CTRL_RSTC_MASK, /*!< Reset command line */
|
|
kUSDHC_ResetData = USDHC_SYS_CTRL_RSTD_MASK, /*!< Reset data line */
|
|
|
|
#if defined(FSL_FEATURE_USDHC_HAS_SDR50_MODE) && (!FSL_FEATURE_USDHC_HAS_SDR50_MODE)
|
|
kUSDHC_ResetTuning = 0U, /*!< no reset tuning circuit bit */
|
|
#else
|
|
kUSDHC_ResetTuning = USDHC_SYS_CTRL_RSTT_MASK, /*!< reset tuning circuit */
|
|
#endif
|
|
|
|
kUSDHC_ResetsAll =
|
|
(kUSDHC_ResetAll | kUSDHC_ResetCommand | kUSDHC_ResetData | kUSDHC_ResetTuning), /*!< All reset types */
|
|
};
|
|
|
|
/*! @brief Transfer flag mask */
|
|
enum _usdhc_transfer_flag
|
|
{
|
|
kUSDHC_EnableDmaFlag = USDHC_MIX_CTRL_DMAEN_MASK, /*!< Enable DMA */
|
|
|
|
kUSDHC_CommandTypeSuspendFlag = (USDHC_CMD_XFR_TYP_CMDTYP(1U)), /*!< Suspend command */
|
|
kUSDHC_CommandTypeResumeFlag = (USDHC_CMD_XFR_TYP_CMDTYP(2U)), /*!< Resume command */
|
|
kUSDHC_CommandTypeAbortFlag = (USDHC_CMD_XFR_TYP_CMDTYP(3U)), /*!< Abort command */
|
|
|
|
kUSDHC_EnableBlockCountFlag = USDHC_MIX_CTRL_BCEN_MASK, /*!< Enable block count */
|
|
kUSDHC_EnableAutoCommand12Flag = USDHC_MIX_CTRL_AC12EN_MASK, /*!< Enable auto CMD12 */
|
|
kUSDHC_DataReadFlag = USDHC_MIX_CTRL_DTDSEL_MASK, /*!< Enable data read */
|
|
kUSDHC_MultipleBlockFlag = USDHC_MIX_CTRL_MSBSEL_MASK, /*!< Multiple block data read/write */
|
|
kUSDHC_EnableAutoCommand23Flag = USDHC_MIX_CTRL_AC23EN_MASK, /*!< Enable auto CMD23 */
|
|
|
|
kUSDHC_ResponseLength136Flag = USDHC_CMD_XFR_TYP_RSPTYP(1U), /*!< 136 bit response length */
|
|
kUSDHC_ResponseLength48Flag = USDHC_CMD_XFR_TYP_RSPTYP(2U), /*!< 48 bit response length */
|
|
kUSDHC_ResponseLength48BusyFlag = USDHC_CMD_XFR_TYP_RSPTYP(3U), /*!< 48 bit response length with busy status */
|
|
|
|
kUSDHC_EnableCrcCheckFlag = USDHC_CMD_XFR_TYP_CCCEN_MASK, /*!< Enable CRC check */
|
|
kUSDHC_EnableIndexCheckFlag = USDHC_CMD_XFR_TYP_CICEN_MASK, /*!< Enable index check */
|
|
kUSDHC_DataPresentFlag = USDHC_CMD_XFR_TYP_DPSEL_MASK, /*!< Data present flag */
|
|
};
|
|
|
|
/*! @brief Present status flag mask */
|
|
enum _usdhc_present_status_flag
|
|
{
|
|
kUSDHC_CommandInhibitFlag = USDHC_PRES_STATE_CIHB_MASK, /*!< Command inhibit */
|
|
kUSDHC_DataInhibitFlag = USDHC_PRES_STATE_CDIHB_MASK, /*!< Data inhibit */
|
|
kUSDHC_DataLineActiveFlag = USDHC_PRES_STATE_DLA_MASK, /*!< Data line active */
|
|
kUSDHC_SdClockStableFlag = USDHC_PRES_STATE_SDSTB_MASK, /*!< SD bus clock stable */
|
|
kUSDHC_WriteTransferActiveFlag = USDHC_PRES_STATE_WTA_MASK, /*!< Write transfer active */
|
|
kUSDHC_ReadTransferActiveFlag = USDHC_PRES_STATE_RTA_MASK, /*!< Read transfer active */
|
|
kUSDHC_BufferWriteEnableFlag = USDHC_PRES_STATE_BWEN_MASK, /*!< Buffer write enable */
|
|
kUSDHC_BufferReadEnableFlag = USDHC_PRES_STATE_BREN_MASK, /*!< Buffer read enable */
|
|
|
|
#if defined(FSL_FEATURE_USDHC_HAS_SDR50_MODE) && (!FSL_FEATURE_USDHC_HAS_SDR50_MODE)
|
|
kUSDHC_DelaySettingFinishedFlag = 0U, /*!< not support */
|
|
kUSDHC_ReTuningRequestFlag = 0U, /*!< not support */
|
|
#else
|
|
kUSDHC_ReTuningRequestFlag = USDHC_PRES_STATE_RTR_MASK, /*!< re-tuning request flag ,only used for SDR104 mode */
|
|
kUSDHC_DelaySettingFinishedFlag = USDHC_PRES_STATE_TSCD_MASK, /*!< delay setting finished flag */
|
|
#endif
|
|
|
|
kUSDHC_CardInsertedFlag = USDHC_PRES_STATE_CINST_MASK, /*!< Card inserted */
|
|
kUSDHC_CommandLineLevelFlag = USDHC_PRES_STATE_CLSL_MASK, /*!< Command line signal level */
|
|
|
|
kUSDHC_Data0LineLevelFlag = (1U << USDHC_PRES_STATE_DLSL_SHIFT), /*!< Data0 line signal level */
|
|
kUSDHC_Data1LineLevelFlag = (1U << (USDHC_PRES_STATE_DLSL_SHIFT + 1U)), /*!< Data1 line signal level */
|
|
kUSDHC_Data2LineLevelFlag = (1U << (USDHC_PRES_STATE_DLSL_SHIFT + 2U)), /*!< Data2 line signal level */
|
|
kUSDHC_Data3LineLevelFlag = (1U << (USDHC_PRES_STATE_DLSL_SHIFT + 3U)), /*!< Data3 line signal level */
|
|
kUSDHC_Data4LineLevelFlag = (1U << (USDHC_PRES_STATE_DLSL_SHIFT + 4U)), /*!< Data4 line signal level */
|
|
kUSDHC_Data5LineLevelFlag = (1U << (USDHC_PRES_STATE_DLSL_SHIFT + 5U)), /*!< Data5 line signal level */
|
|
kUSDHC_Data6LineLevelFlag = (1U << (USDHC_PRES_STATE_DLSL_SHIFT + 6U)), /*!< Data6 line signal level */
|
|
kUSDHC_Data7LineLevelFlag = (1U << (USDHC_PRES_STATE_DLSL_SHIFT + 7U)), /*!< Data7 line signal level */
|
|
};
|
|
|
|
/*! @brief Interrupt status flag mask */
|
|
enum _usdhc_interrupt_status_flag
|
|
{
|
|
kUSDHC_CommandCompleteFlag = USDHC_INT_STATUS_CC_MASK, /*!< Command complete */
|
|
kUSDHC_DataCompleteFlag = USDHC_INT_STATUS_TC_MASK, /*!< Data complete */
|
|
kUSDHC_BlockGapEventFlag = USDHC_INT_STATUS_BGE_MASK, /*!< Block gap event */
|
|
kUSDHC_DmaCompleteFlag = USDHC_INT_STATUS_DINT_MASK, /*!< DMA interrupt */
|
|
kUSDHC_BufferWriteReadyFlag = USDHC_INT_STATUS_BWR_MASK, /*!< Buffer write ready */
|
|
kUSDHC_BufferReadReadyFlag = USDHC_INT_STATUS_BRR_MASK, /*!< Buffer read ready */
|
|
kUSDHC_CardInsertionFlag = USDHC_INT_STATUS_CINS_MASK, /*!< Card inserted */
|
|
kUSDHC_CardRemovalFlag = USDHC_INT_STATUS_CRM_MASK, /*!< Card removed */
|
|
kUSDHC_CardInterruptFlag = USDHC_INT_STATUS_CINT_MASK, /*!< Card interrupt */
|
|
|
|
#if defined(FSL_FEATURE_USDHC_HAS_SDR50_MODE) && (!FSL_FEATURE_USDHC_HAS_SDR50_MODE)
|
|
kUSDHC_ReTuningEventFlag = 0U, /*!< Re-Tuning event,only for SD3.0 SDR104 mode */
|
|
kUSDHC_TuningPassFlag = 0U, /*!< SDR104 mode tuning pass flag */
|
|
kUSDHC_TuningErrorFlag = 0U, /*!< SDR104 tuning error flag */
|
|
#else
|
|
kUSDHC_ReTuningEventFlag = USDHC_INT_STATUS_RTE_MASK, /*!< Re-Tuning event,only for SD3.0 SDR104 mode */
|
|
kUSDHC_TuningPassFlag = USDHC_INT_STATUS_TP_MASK, /*!< SDR104 mode tuning pass flag */
|
|
kUSDHC_TuningErrorFlag = USDHC_INT_STATUS_TNE_MASK, /*!< SDR104 tuning error flag */
|
|
#endif
|
|
|
|
kUSDHC_CommandTimeoutFlag = USDHC_INT_STATUS_CTOE_MASK, /*!< Command timeout error */
|
|
kUSDHC_CommandCrcErrorFlag = USDHC_INT_STATUS_CCE_MASK, /*!< Command CRC error */
|
|
kUSDHC_CommandEndBitErrorFlag = USDHC_INT_STATUS_CEBE_MASK, /*!< Command end bit error */
|
|
kUSDHC_CommandIndexErrorFlag = USDHC_INT_STATUS_CIE_MASK, /*!< Command index error */
|
|
kUSDHC_DataTimeoutFlag = USDHC_INT_STATUS_DTOE_MASK, /*!< Data timeout error */
|
|
kUSDHC_DataCrcErrorFlag = USDHC_INT_STATUS_DCE_MASK, /*!< Data CRC error */
|
|
kUSDHC_DataEndBitErrorFlag = USDHC_INT_STATUS_DEBE_MASK, /*!< Data end bit error */
|
|
kUSDHC_AutoCommand12ErrorFlag = USDHC_INT_STATUS_AC12E_MASK, /*!< Auto CMD12 error */
|
|
kUSDHC_DmaErrorFlag = USDHC_INT_STATUS_DMAE_MASK, /*!< DMA error */
|
|
|
|
kUSDHC_CommandErrorFlag = (kUSDHC_CommandTimeoutFlag | kUSDHC_CommandCrcErrorFlag | kUSDHC_CommandEndBitErrorFlag |
|
|
kUSDHC_CommandIndexErrorFlag), /*!< Command error */
|
|
kUSDHC_DataErrorFlag = (kUSDHC_DataTimeoutFlag | kUSDHC_DataCrcErrorFlag | kUSDHC_DataEndBitErrorFlag |
|
|
kUSDHC_AutoCommand12ErrorFlag), /*!< Data error */
|
|
kUSDHC_ErrorFlag = (kUSDHC_CommandErrorFlag | kUSDHC_DataErrorFlag | kUSDHC_DmaErrorFlag), /*!< All error */
|
|
kUSDHC_DataFlag = (kUSDHC_DataCompleteFlag | kUSDHC_DmaCompleteFlag | kUSDHC_BufferWriteReadyFlag |
|
|
kUSDHC_BufferReadReadyFlag | kUSDHC_DataErrorFlag | kUSDHC_DmaErrorFlag), /*!< Data interrupts */
|
|
kUSDHC_CommandFlag = (kUSDHC_CommandErrorFlag | kUSDHC_CommandCompleteFlag), /*!< Command interrupts */
|
|
kUSDHC_CardDetectFlag = (kUSDHC_CardInsertionFlag | kUSDHC_CardRemovalFlag), /*!< Card detection interrupts */
|
|
kUSDHC_SDR104TuningFlag = (kUSDHC_TuningErrorFlag | kUSDHC_TuningPassFlag | kUSDHC_ReTuningEventFlag),
|
|
|
|
kUSDHC_AllInterruptFlags = (kUSDHC_BlockGapEventFlag | kUSDHC_CardInterruptFlag | kUSDHC_CommandFlag |
|
|
kUSDHC_DataFlag | kUSDHC_ErrorFlag | kUSDHC_SDR104TuningFlag), /*!< All flags mask */
|
|
};
|
|
|
|
/*! @brief Auto CMD12 error status flag mask */
|
|
enum _usdhc_auto_command12_error_status_flag
|
|
{
|
|
kUSDHC_AutoCommand12NotExecutedFlag = USDHC_AUTOCMD12_ERR_STATUS_AC12NE_MASK, /*!< Not executed error */
|
|
kUSDHC_AutoCommand12TimeoutFlag = USDHC_AUTOCMD12_ERR_STATUS_AC12TOE_MASK, /*!< Timeout error */
|
|
kUSDHC_AutoCommand12EndBitErrorFlag = USDHC_AUTOCMD12_ERR_STATUS_AC12EBE_MASK, /*!< End bit error */
|
|
kUSDHC_AutoCommand12CrcErrorFlag = USDHC_AUTOCMD12_ERR_STATUS_AC12CE_MASK, /*!< CRC error */
|
|
kUSDHC_AutoCommand12IndexErrorFlag = USDHC_AUTOCMD12_ERR_STATUS_AC12IE_MASK, /*!< Index error */
|
|
kUSDHC_AutoCommand12NotIssuedFlag = USDHC_AUTOCMD12_ERR_STATUS_CNIBAC12E_MASK, /*!< Not issued error */
|
|
};
|
|
|
|
/*! @brief standard tuning flag */
|
|
enum _usdhc_standard_tuning
|
|
{
|
|
#if defined(FSL_FEATURE_USDHC_HAS_SDR50_MODE) && (!FSL_FEATURE_USDHC_HAS_SDR50_MODE)
|
|
kUSDHC_ExecuteTuning = 0U, /*!< not support */
|
|
kUSDHC_TuningSampleClockSel = 0U, /*!< not support */
|
|
#else
|
|
kUSDHC_ExecuteTuning = USDHC_AUTOCMD12_ERR_STATUS_EXECUTE_TUNING_MASK, /*!< used to start tuning procedure */
|
|
kUSDHC_TuningSampleClockSel =
|
|
USDHC_AUTOCMD12_ERR_STATUS_SMP_CLK_SEL_MASK, /*!< when std_tuning_en bit is set, this bit is used
|
|
select sampleing clock */
|
|
#endif
|
|
};
|
|
|
|
/*! @brief ADMA error status flag mask */
|
|
enum _usdhc_adma_error_status_flag
|
|
{
|
|
kUSDHC_AdmaLenghMismatchFlag = USDHC_ADMA_ERR_STATUS_ADMALME_MASK, /*!< Length mismatch error */
|
|
kUSDHC_AdmaDescriptorErrorFlag = USDHC_ADMA_ERR_STATUS_ADMADCE_MASK, /*!< Descriptor error */
|
|
};
|
|
|
|
/*!
|
|
* @brief ADMA error state
|
|
*
|
|
* This state is the detail state when ADMA error has occurred.
|
|
*/
|
|
enum _usdhc_adma_error_state
|
|
{
|
|
kUSDHC_AdmaErrorStateStopDma =
|
|
0x00U, /*!< Stop DMA, previous location set in the ADMA system address is error address */
|
|
kUSDHC_AdmaErrorStateFetchDescriptor =
|
|
0x01U, /*!< Fetch descriptor, current location set in the ADMA system address is error address */
|
|
kUSDHC_AdmaErrorStateChangeAddress = 0x02U, /*!< Change address, no DMA error is occured */
|
|
kUSDHC_AdmaErrorStateTransferData =
|
|
0x03U, /*!< Transfer data, previous location set in the ADMA system address is error address */
|
|
kUSDHC_AdmaErrorStateInvalidLength = 0x04U, /*!< Invalid length in ADMA descriptor */
|
|
kUSDHC_AdmaErrorStateInvalidDescriptor = 0x08U, /*!< Invalid descriptor fetched by ADMA */
|
|
|
|
kUSDHC_AdmaErrorState = kUSDHC_AdmaErrorStateInvalidLength | kUSDHC_AdmaErrorStateInvalidDescriptor |
|
|
kUSDHC_AdmaErrorStateFetchDescriptor, /*!< ADMA error state */
|
|
};
|
|
|
|
/*! @brief Force event mask */
|
|
enum _usdhc_force_event
|
|
{
|
|
kUSDHC_ForceEventAutoCommand12NotExecuted = USDHC_FORCE_EVENT_FEVTAC12NE_MASK, /*!< Auto CMD12 not executed error */
|
|
kUSDHC_ForceEventAutoCommand12Timeout = USDHC_FORCE_EVENT_FEVTAC12TOE_MASK, /*!< Auto CMD12 timeout error */
|
|
kUSDHC_ForceEventAutoCommand12CrcError = USDHC_FORCE_EVENT_FEVTAC12CE_MASK, /*!< Auto CMD12 CRC error */
|
|
kUSDHC_ForceEventEndBitError = USDHC_FORCE_EVENT_FEVTAC12EBE_MASK, /*!< Auto CMD12 end bit error */
|
|
kUSDHC_ForceEventAutoCommand12IndexError = USDHC_FORCE_EVENT_FEVTAC12IE_MASK, /*!< Auto CMD12 index error */
|
|
kUSDHC_ForceEventAutoCommand12NotIssued = USDHC_FORCE_EVENT_FEVTCNIBAC12E_MASK, /*!< Auto CMD12 not issued error */
|
|
kUSDHC_ForceEventCommandTimeout = USDHC_FORCE_EVENT_FEVTCTOE_MASK, /*!< Command timeout error */
|
|
kUSDHC_ForceEventCommandCrcError = USDHC_FORCE_EVENT_FEVTCCE_MASK, /*!< Command CRC error */
|
|
kUSDHC_ForceEventCommandEndBitError = USDHC_FORCE_EVENT_FEVTCEBE_MASK, /*!< Command end bit error */
|
|
kUSDHC_ForceEventCommandIndexError = USDHC_FORCE_EVENT_FEVTCIE_MASK, /*!< Command index error */
|
|
kUSDHC_ForceEventDataTimeout = USDHC_FORCE_EVENT_FEVTDTOE_MASK, /*!< Data timeout error */
|
|
kUSDHC_ForceEventDataCrcError = USDHC_FORCE_EVENT_FEVTDCE_MASK, /*!< Data CRC error */
|
|
kUSDHC_ForceEventDataEndBitError = USDHC_FORCE_EVENT_FEVTDEBE_MASK, /*!< Data end bit error */
|
|
kUSDHC_ForceEventAutoCommand12Error = USDHC_FORCE_EVENT_FEVTAC12E_MASK, /*!< Auto CMD12 error */
|
|
kUSDHC_ForceEventCardInt = USDHC_FORCE_EVENT_FEVTCINT_MASK, /*!< Card interrupt */
|
|
kUSDHC_ForceEventDmaError = USDHC_FORCE_EVENT_FEVTDMAE_MASK, /*!< Dma error */
|
|
#if defined(FSL_FEATURE_USDHC_HAS_SDR50_MODE) && (!FSL_FEATURE_USDHC_HAS_SDR50_MODE)
|
|
kUSDHC_ForceEventTuningError = 0U, /*!< not support */
|
|
#else
|
|
kUSDHC_ForceEventTuningError = USDHC_FORCE_EVENT_FEVTTNE_MASK, /*!< Tuning error */
|
|
#endif
|
|
kUSDHC_ForceEventsAll =
|
|
(kUSDHC_ForceEventAutoCommand12NotExecuted | kUSDHC_ForceEventAutoCommand12Timeout |
|
|
kUSDHC_ForceEventAutoCommand12CrcError | kUSDHC_ForceEventEndBitError |
|
|
kUSDHC_ForceEventAutoCommand12IndexError | kUSDHC_ForceEventAutoCommand12NotIssued |
|
|
kUSDHC_ForceEventCommandTimeout | kUSDHC_ForceEventCommandCrcError | kUSDHC_ForceEventCommandEndBitError |
|
|
kUSDHC_ForceEventCommandIndexError | kUSDHC_ForceEventDataTimeout | kUSDHC_ForceEventDataCrcError |
|
|
kUSDHC_ForceEventDataEndBitError | kUSDHC_ForceEventAutoCommand12Error | kUSDHC_ForceEventCardInt |
|
|
kUSDHC_ForceEventDmaError | kUSDHC_ForceEventTuningError), /*!< All force event flags mask */
|
|
};
|
|
|
|
/*! @brief Data transfer width */
|
|
typedef enum _usdhc_data_bus_width
|
|
{
|
|
kUSDHC_DataBusWidth1Bit = 0U, /*!< 1-bit mode */
|
|
kUSDHC_DataBusWidth4Bit = 1U, /*!< 4-bit mode */
|
|
kUSDHC_DataBusWidth8Bit = 2U, /*!< 8-bit mode */
|
|
} usdhc_data_bus_width_t;
|
|
|
|
/*! @brief Endian mode */
|
|
typedef enum _usdhc_endian_mode
|
|
{
|
|
kUSDHC_EndianModeBig = 0U, /*!< Big endian mode */
|
|
kUSDHC_EndianModeHalfWordBig = 1U, /*!< Half word big endian mode */
|
|
kUSDHC_EndianModeLittle = 2U, /*!< Little endian mode */
|
|
} usdhc_endian_mode_t;
|
|
|
|
/*! @brief DMA mode */
|
|
typedef enum _usdhc_dma_mode
|
|
{
|
|
kUSDHC_DmaModeSimple = 0U, /*!< external DMA */
|
|
kUSDHC_DmaModeAdma1 = 1U, /*!< ADMA1 is selected */
|
|
kUSDHC_DmaModeAdma2 = 2U, /*!< ADMA2 is selected */
|
|
kUSDHC_ExternalDMA = 3U, /*!< external dma mode select */
|
|
} usdhc_dma_mode_t;
|
|
|
|
/*! @brief SDIO control flag mask */
|
|
enum _usdhc_sdio_control_flag
|
|
{
|
|
kUSDHC_StopAtBlockGapFlag = USDHC_PROT_CTRL_SABGREQ_MASK, /*!< Stop at block gap */
|
|
kUSDHC_ReadWaitControlFlag = USDHC_PROT_CTRL_RWCTL_MASK, /*!< Read wait control */
|
|
kUSDHC_InterruptAtBlockGapFlag = USDHC_PROT_CTRL_IABG_MASK, /*!< Interrupt at block gap */
|
|
kUSDHC_ReadDoneNo8CLK = USDHC_PROT_CTRL_RD_DONE_NO_8CLK_MASK, /*!< read done without 8 clk for block gap */
|
|
kUSDHC_ExactBlockNumberReadFlag = USDHC_PROT_CTRL_NON_EXACT_BLK_RD_MASK, /*!< Exact block number read */
|
|
};
|
|
|
|
/*! @brief MMC card boot mode */
|
|
typedef enum _usdhc_boot_mode
|
|
{
|
|
kUSDHC_BootModeNormal = 0U, /*!< Normal boot */
|
|
kUSDHC_BootModeAlternative = 1U, /*!< Alternative boot */
|
|
} usdhc_boot_mode_t;
|
|
|
|
/*! @brief The command type */
|
|
typedef enum _usdhc_card_command_type
|
|
{
|
|
kCARD_CommandTypeNormal = 0U, /*!< Normal command */
|
|
kCARD_CommandTypeSuspend = 1U, /*!< Suspend command */
|
|
kCARD_CommandTypeResume = 2U, /*!< Resume command */
|
|
kCARD_CommandTypeAbort = 3U, /*!< Abort command */
|
|
kCARD_CommandTypeEmpty = 4U, /*!< Empty command */
|
|
} usdhc_card_command_type_t;
|
|
|
|
/*!
|
|
* @brief The command response type.
|
|
*
|
|
* Define the command response type from card to host controller.
|
|
*/
|
|
typedef enum _usdhc_card_response_type
|
|
{
|
|
kCARD_ResponseTypeNone = 0U, /*!< Response type: none */
|
|
kCARD_ResponseTypeR1 = 1U, /*!< Response type: R1 */
|
|
kCARD_ResponseTypeR1b = 2U, /*!< Response type: R1b */
|
|
kCARD_ResponseTypeR2 = 3U, /*!< Response type: R2 */
|
|
kCARD_ResponseTypeR3 = 4U, /*!< Response type: R3 */
|
|
kCARD_ResponseTypeR4 = 5U, /*!< Response type: R4 */
|
|
kCARD_ResponseTypeR5 = 6U, /*!< Response type: R5 */
|
|
kCARD_ResponseTypeR5b = 7U, /*!< Response type: R5b */
|
|
kCARD_ResponseTypeR6 = 8U, /*!< Response type: R6 */
|
|
kCARD_ResponseTypeR7 = 9U, /*!< Response type: R7 */
|
|
} usdhc_card_response_type_t;
|
|
|
|
/*! @brief The alignment size for ADDRESS filed in ADMA1's descriptor */
|
|
#define USDHC_ADMA1_ADDRESS_ALIGN (4096U)
|
|
/*! @brief The alignment size for LENGTH field in ADMA1's descriptor */
|
|
#define USDHC_ADMA1_LENGTH_ALIGN (4096U)
|
|
/*! @brief The alignment size for ADDRESS field in ADMA2's descriptor */
|
|
#define USDHC_ADMA2_ADDRESS_ALIGN (4U)
|
|
/*! @brief The alignment size for LENGTH filed in ADMA2's descriptor */
|
|
#define USDHC_ADMA2_LENGTH_ALIGN (4U)
|
|
|
|
/* ADMA1 descriptor table
|
|
* |------------------------|---------|--------------------------|
|
|
* | Address/page field |Reserved | Attribute |
|
|
* |------------------------|---------|--------------------------|
|
|
* |31 12|11 6|05 |04 |03|02 |01 |00 |
|
|
* |------------------------|---------|----|----|--|---|---|-----|
|
|
* | address or data length | 000000 |Act2|Act1| 0|Int|End|Valid|
|
|
* |------------------------|---------|----|----|--|---|---|-----|
|
|
*
|
|
*
|
|
* |------|------|-----------------|-------|-------------|
|
|
* | Act2 | Act1 | Comment | 31-28 | 27 - 12 |
|
|
* |------|------|-----------------|---------------------|
|
|
* | 0 | 0 | No op | Don't care |
|
|
* |------|------|-----------------|-------|-------------|
|
|
* | 0 | 1 | Set data length | 0000 | Data Length |
|
|
* |------|------|-----------------|-------|-------------|
|
|
* | 1 | 0 | Transfer data | Data address |
|
|
* |------|------|-----------------|---------------------|
|
|
* | 1 | 1 | Link descriptor | Descriptor address |
|
|
* |------|------|-----------------|---------------------|
|
|
*/
|
|
/*! @brief The bit shift for ADDRESS filed in ADMA1's descriptor */
|
|
#define USDHC_ADMA1_DESCRIPTOR_ADDRESS_SHIFT (12U)
|
|
/*! @brief The bit mask for ADDRESS field in ADMA1's descriptor */
|
|
#define USDHC_ADMA1_DESCRIPTOR_ADDRESS_MASK (0xFFFFFU)
|
|
/*! @brief The bit shift for LENGTH filed in ADMA1's descriptor */
|
|
#define USDHC_ADMA1_DESCRIPTOR_LENGTH_SHIFT (12U)
|
|
/*! @brief The mask for LENGTH field in ADMA1's descriptor */
|
|
#define USDHC_ADMA1_DESCRIPTOR_LENGTH_MASK (0xFFFFU)
|
|
/*! @brief The maximum value of LENGTH filed in ADMA1's descriptor */
|
|
#define USDHC_ADMA1_DESCRIPTOR_MAX_LENGTH_PER_ENTRY (USDHC_ADMA1_DESCRIPTOR_LENGTH_MASK - 3U)
|
|
|
|
/*! @brief The mask for the control/status field in ADMA1 descriptor */
|
|
enum _usdhc_adma1_descriptor_flag
|
|
{
|
|
kUSDHC_Adma1DescriptorValidFlag = (1U << 0U), /*!< Valid flag */
|
|
kUSDHC_Adma1DescriptorEndFlag = (1U << 1U), /*!< End flag */
|
|
kUSDHC_Adma1DescriptorInterrupFlag = (1U << 2U), /*!< Interrupt flag */
|
|
kUSDHC_Adma1DescriptorActivity1Flag = (1U << 4U), /*!< Activity 1 flag */
|
|
kUSDHC_Adma1DescriptorActivity2Flag = (1U << 5U), /*!< Activity 2 flag */
|
|
kUSDHC_Adma1DescriptorTypeNop = (kUSDHC_Adma1DescriptorValidFlag), /*!< No operation */
|
|
kUSDHC_Adma1DescriptorTypeTransfer =
|
|
(kUSDHC_Adma1DescriptorActivity2Flag | kUSDHC_Adma1DescriptorValidFlag), /*!< Transfer data */
|
|
kUSDHC_Adma1DescriptorTypeLink = (kUSDHC_Adma1DescriptorActivity1Flag | kUSDHC_Adma1DescriptorActivity2Flag |
|
|
kUSDHC_Adma1DescriptorValidFlag), /*!< Link descriptor */
|
|
kUSDHC_Adma1DescriptorTypeSetLength =
|
|
(kUSDHC_Adma1DescriptorActivity1Flag | kUSDHC_Adma1DescriptorValidFlag), /*!< Set data length */
|
|
};
|
|
|
|
/* ADMA2 descriptor table
|
|
* |----------------|---------------|-------------|--------------------------|
|
|
* | Address field | Length | Reserved | Attribute |
|
|
* |----------------|---------------|-------------|--------------------------|
|
|
* |63 32|31 16|15 06|05 |04 |03|02 |01 |00 |
|
|
* |----------------|---------------|-------------|----|----|--|---|---|-----|
|
|
* | 32-bit address | 16-bit length | 0000000000 |Act2|Act1| 0|Int|End|Valid|
|
|
* |----------------|---------------|-------------|----|----|--|---|---|-----|
|
|
*
|
|
*
|
|
* | Act2 | Act1 | Comment | Operation |
|
|
* |------|------|-----------------|-------------------------------------------------------------------|
|
|
* | 0 | 0 | No op | Don't care |
|
|
* |------|------|-----------------|-------------------------------------------------------------------|
|
|
* | 0 | 1 | Reserved | Read this line and go to next one |
|
|
* |------|------|-----------------|-------------------------------------------------------------------|
|
|
* | 1 | 0 | Transfer data | Transfer data with address and length set in this descriptor line |
|
|
* |------|------|-----------------|-------------------------------------------------------------------|
|
|
* | 1 | 1 | Link descriptor | Link to another descriptor |
|
|
* |------|------|-----------------|-------------------------------------------------------------------|
|
|
*/
|
|
/*! @brief The bit shift for LENGTH field in ADMA2's descriptor */
|
|
#define USDHC_ADMA2_DESCRIPTOR_LENGTH_SHIFT (16U)
|
|
/*! @brief The bit mask for LENGTH field in ADMA2's descriptor */
|
|
#define USDHC_ADMA2_DESCRIPTOR_LENGTH_MASK (0xFFFFU)
|
|
/*! @brief The maximum value of LENGTH field in ADMA2's descriptor */
|
|
#define USDHC_ADMA2_DESCRIPTOR_MAX_LENGTH_PER_ENTRY (USDHC_ADMA2_DESCRIPTOR_LENGTH_MASK - 3U)
|
|
|
|
/*! @brief ADMA1 descriptor control and status mask */
|
|
enum _usdhc_adma2_descriptor_flag
|
|
{
|
|
kUSDHC_Adma2DescriptorValidFlag = (1U << 0U), /*!< Valid flag */
|
|
kUSDHC_Adma2DescriptorEndFlag = (1U << 1U), /*!< End flag */
|
|
kUSDHC_Adma2DescriptorInterruptFlag = (1U << 2U), /*!< Interrupt flag */
|
|
kUSDHC_Adma2DescriptorActivity1Flag = (1U << 4U), /*!< Activity 1 mask */
|
|
kUSDHC_Adma2DescriptorActivity2Flag = (1U << 5U), /*!< Activity 2 mask */
|
|
|
|
kUSDHC_Adma2DescriptorTypeNop = (kUSDHC_Adma2DescriptorValidFlag), /*!< No operation */
|
|
kUSDHC_Adma2DescriptorTypeReserved =
|
|
(kUSDHC_Adma2DescriptorActivity1Flag | kUSDHC_Adma2DescriptorValidFlag), /*!< Reserved */
|
|
kUSDHC_Adma2DescriptorTypeTransfer =
|
|
(kUSDHC_Adma2DescriptorActivity2Flag | kUSDHC_Adma2DescriptorValidFlag), /*!< Transfer type */
|
|
kUSDHC_Adma2DescriptorTypeLink = (kUSDHC_Adma2DescriptorActivity1Flag | kUSDHC_Adma2DescriptorActivity2Flag |
|
|
kUSDHC_Adma2DescriptorValidFlag), /*!< Link type */
|
|
};
|
|
|
|
/*! @brief ADMA descriptor configuration flag */
|
|
enum _usdhc_adma_flag
|
|
{
|
|
kUSDHC_AdmaDescriptorSingleFlag =
|
|
0U, /*!< try to finish the transfer in a single ADMA descriptor, if transfer size is bigger than one
|
|
ADMA descriptor's ability, new another descriptor for data transfer */
|
|
kUSDHC_AdmaDescriptorMultipleFlag = 1U, /*!< create multiple ADMA descriptor within the ADMA table, this is used for
|
|
mmc boot mode specifically, which need
|
|
to modify the ADMA descriptor on the fly, so the flag should be used
|
|
combine with stop at block gap feature */
|
|
};
|
|
|
|
/*! @brief dma transfer burst len config. */
|
|
typedef enum _usdhc_burst_len
|
|
{
|
|
kUSDHC_EnBurstLenForINCR = 0x01U, /*!< enable burst len for INCR */
|
|
kUSDHC_EnBurstLenForINCR4816 = 0x02U, /*!< enable burst len for INCR4/INCR8/INCR16 */
|
|
kUSDHC_EnBurstLenForINCR4816WRAP = 0x04U, /*!< enable burst len for INCR4/8/16 WRAP */
|
|
} usdhc_burst_len_t;
|
|
|
|
/*! @brief transfer data type definition. */
|
|
enum _usdhc_transfer_data_type
|
|
{
|
|
kUSDHC_TransferDataNormal = 0U, /*!< transfer normal read/write data */
|
|
kUSDHC_TransferDataTuning = 1U, /*!< transfer tuning data */
|
|
kUSDHC_TransferDataBoot = 2U, /*!< transfer boot data */
|
|
kUSDHC_TransferDataBootcontinous = 3U, /*!< transfer boot data continous */
|
|
};
|
|
|
|
/*! @brief Defines the adma1 descriptor structure. */
|
|
typedef uint32_t usdhc_adma1_descriptor_t;
|
|
|
|
/*! @brief Defines the ADMA2 descriptor structure. */
|
|
typedef struct _usdhc_adma2_descriptor
|
|
{
|
|
uint32_t attribute; /*!< The control and status field */
|
|
const uint32_t *address; /*!< The address field */
|
|
} usdhc_adma2_descriptor_t;
|
|
|
|
/*!
|
|
* @brief USDHC capability information.
|
|
*
|
|
* Defines a structure to save the capability information of USDHC.
|
|
*/
|
|
typedef struct _usdhc_capability
|
|
{
|
|
uint32_t sdVersion; /*!< support SD card/sdio version */
|
|
uint32_t mmcVersion; /*!< support emmc card version */
|
|
uint32_t maxBlockLength; /*!< Maximum block length united as byte */
|
|
uint32_t maxBlockCount; /*!< Maximum block count can be set one time */
|
|
uint32_t flags; /*!< Capability flags to indicate the support information(_usdhc_capability_flag) */
|
|
} usdhc_capability_t;
|
|
|
|
/*! @brief Data structure to configure the MMC boot feature */
|
|
typedef struct _usdhc_boot_config
|
|
{
|
|
uint32_t ackTimeoutCount; /*!< Timeout value for the boot ACK. The available range is 0 ~ 15. */
|
|
usdhc_boot_mode_t bootMode; /*!< Boot mode selection. */
|
|
uint32_t blockCount; /*!< Stop at block gap value of automatic mode. Available range is 0 ~ 65535. */
|
|
size_t blockSize; /*!< Block size */
|
|
bool enableBootAck; /*!< Enable or disable boot ACK */
|
|
bool enableAutoStopAtBlockGap; /*!< Enable or disable auto stop at block gap function in boot period */
|
|
} usdhc_boot_config_t;
|
|
|
|
/*! @brief Data structure to initialize the USDHC */
|
|
typedef struct _usdhc_config
|
|
{
|
|
uint32_t dataTimeout; /*!< Data timeout value */
|
|
usdhc_endian_mode_t endianMode; /*!< Endian mode */
|
|
uint8_t readWatermarkLevel; /*!< Watermark level for DMA read operation. Available range is 1 ~ 128. */
|
|
uint8_t writeWatermarkLevel; /*!< Watermark level for DMA write operation. Available range is 1 ~ 128. */
|
|
uint8_t readBurstLen; /*!< Read burst len */
|
|
uint8_t writeBurstLen; /*!< Write burst len */
|
|
} usdhc_config_t;
|
|
|
|
/*!
|
|
* @brief Card data descriptor
|
|
*
|
|
* Defines a structure to contain data-related attribute. 'enableIgnoreError' is used for the case that upper card
|
|
* driver
|
|
* want to ignore the error event to read/write all the data not to stop read/write immediately when error event
|
|
* happen for example bus testing procedure for MMC card.
|
|
*/
|
|
typedef struct _usdhc_data
|
|
{
|
|
bool enableAutoCommand12; /*!< Enable auto CMD12 */
|
|
bool enableAutoCommand23; /*!< Enable auto CMD23 */
|
|
bool enableIgnoreError; /*!< Enable to ignore error event to read/write all the data */
|
|
uint8_t dataType; /*!< this is used to distinguish the normal/tuning/boot data */
|
|
size_t blockSize; /*!< Block size */
|
|
uint32_t blockCount; /*!< Block count */
|
|
uint32_t *rxData; /*!< Buffer to save data read */
|
|
const uint32_t *txData; /*!< Data buffer to write */
|
|
} usdhc_data_t;
|
|
|
|
/*!
|
|
* @brief Card command descriptor
|
|
*
|
|
* Define card command-related attribute.
|
|
*/
|
|
typedef struct _usdhc_command
|
|
{
|
|
uint32_t index; /*!< Command index */
|
|
uint32_t argument; /*!< Command argument */
|
|
usdhc_card_command_type_t type; /*!< Command type */
|
|
usdhc_card_response_type_t responseType; /*!< Command response type */
|
|
uint32_t response[4U]; /*!< Response for this command */
|
|
uint32_t responseErrorFlags; /*!< response error flag, the flag which need to check
|
|
the command reponse*/
|
|
uint32_t flags; /*!< Cmd flags */
|
|
} usdhc_command_t;
|
|
|
|
/*! @brief ADMA configuration */
|
|
typedef struct _usdhc_adma_config
|
|
{
|
|
usdhc_dma_mode_t dmaMode; /*!< DMA mode */
|
|
|
|
usdhc_burst_len_t burstLen; /*!< burst len config */
|
|
|
|
uint32_t *admaTable; /*!< ADMA table address, can't be null if transfer way is ADMA1/ADMA2 */
|
|
uint32_t admaTableWords; /*!< ADMA table length united as words, can't be 0 if transfer way is ADMA1/ADMA2 */
|
|
} usdhc_adma_config_t;
|
|
|
|
/*! @brief Transfer state */
|
|
typedef struct _usdhc_transfer
|
|
{
|
|
usdhc_data_t *data; /*!< Data to transfer */
|
|
usdhc_command_t *command; /*!< Command to send */
|
|
} usdhc_transfer_t;
|
|
|
|
/*! @brief USDHC handle typedef */
|
|
typedef struct _usdhc_handle usdhc_handle_t;
|
|
|
|
/*! @brief USDHC callback functions. */
|
|
typedef struct _usdhc_transfer_callback
|
|
{
|
|
void (*CardInserted)(USDHC_Type *base,
|
|
void *userData); /*!< Card inserted occurs when DAT3/CD pin is for card detect */
|
|
void (*CardRemoved)(USDHC_Type *base, void *userData); /*!< Card removed occurs */
|
|
void (*SdioInterrupt)(USDHC_Type *base, void *userData); /*!< SDIO card interrupt occurs */
|
|
void (*BlockGap)(USDHC_Type *base, void *userData); /*!< stopped at block gap event */
|
|
void (*TransferComplete)(USDHC_Type *base,
|
|
usdhc_handle_t *handle,
|
|
status_t status,
|
|
void *userData); /*!< Transfer complete callback */
|
|
void (*ReTuning)(USDHC_Type *base, void *userData); /*!< handle the re-tuning */
|
|
} usdhc_transfer_callback_t;
|
|
|
|
/*!
|
|
* @brief USDHC handle
|
|
*
|
|
* Defines the structure to save the USDHC state information and callback function. The detailed interrupt status when
|
|
* sending a command or transfering data can be obtained from the interruptFlags field by using the mask defined in
|
|
* usdhc_interrupt_flag_t.
|
|
*
|
|
* @note All the fields except interruptFlags and transferredWords must be allocated by the user.
|
|
*/
|
|
struct _usdhc_handle
|
|
{
|
|
/* Transfer parameter */
|
|
usdhc_data_t *volatile data; /*!< Data to transfer */
|
|
usdhc_command_t *volatile command; /*!< Command to send */
|
|
|
|
/* Transfer status */
|
|
volatile uint32_t interruptFlags; /*!< Interrupt flags of last transaction */
|
|
volatile uint32_t transferredWords; /*!< Words transferred by DATAPORT way */
|
|
|
|
/* Callback functions */
|
|
usdhc_transfer_callback_t callback; /*!< Callback function */
|
|
void *userData; /*!< Parameter for transfer complete callback */
|
|
};
|
|
|
|
/*! @brief USDHC transfer function. */
|
|
typedef status_t (*usdhc_transfer_function_t)(USDHC_Type *base, usdhc_transfer_t *content);
|
|
|
|
/*! @brief USDHC host descriptor */
|
|
typedef struct _usdhc_host
|
|
{
|
|
USDHC_Type *base; /*!< USDHC peripheral base address */
|
|
uint32_t sourceClock_Hz; /*!< USDHC source clock frequency united in Hz */
|
|
usdhc_config_t config; /*!< USDHC configuration */
|
|
usdhc_capability_t capability; /*!< USDHC capability information */
|
|
usdhc_transfer_function_t transfer; /*!< USDHC transfer function */
|
|
} usdhc_host_t;
|
|
|
|
/*************************************************************************************************
|
|
* API
|
|
************************************************************************************************/
|
|
#if defined(__cplusplus)
|
|
extern "C" {
|
|
#endif
|
|
|
|
/*!
|
|
* @name Initialization and deinitialization
|
|
* @{
|
|
*/
|
|
|
|
/*!
|
|
* @brief USDHC module initialization function.
|
|
*
|
|
* Configures the USDHC according to the user configuration.
|
|
*
|
|
* Example:
|
|
@code
|
|
usdhc_config_t config;
|
|
config.cardDetectDat3 = false;
|
|
config.endianMode = kUSDHC_EndianModeLittle;
|
|
config.dmaMode = kUSDHC_DmaModeAdma2;
|
|
config.readWatermarkLevel = 128U;
|
|
config.writeWatermarkLevel = 128U;
|
|
USDHC_Init(USDHC, &config);
|
|
@endcode
|
|
*
|
|
* @param base USDHC peripheral base address.
|
|
* @param config USDHC configuration information.
|
|
* @retval kStatus_Success Operate successfully.
|
|
*/
|
|
void USDHC_Init(USDHC_Type *base, const usdhc_config_t *config);
|
|
|
|
/*!
|
|
* @brief Deinitializes the USDHC.
|
|
*
|
|
* @param base USDHC peripheral base address.
|
|
*/
|
|
void USDHC_Deinit(USDHC_Type *base);
|
|
|
|
/*!
|
|
* @brief Resets the USDHC.
|
|
*
|
|
* @param base USDHC peripheral base address.
|
|
* @param mask The reset type mask(_usdhc_reset).
|
|
* @param timeout Timeout for reset.
|
|
* @retval true Reset successfully.
|
|
* @retval false Reset failed.
|
|
*/
|
|
bool USDHC_Reset(USDHC_Type *base, uint32_t mask, uint32_t timeout);
|
|
|
|
/* @} */
|
|
|
|
/*!
|
|
* @name DMA Control
|
|
* @{
|
|
*/
|
|
|
|
/*!
|
|
* @brief Sets the DMA descriptor table configuration.
|
|
* A high level DMA descriptor configuration function.
|
|
* @param base USDHC peripheral base address.
|
|
* @param adma configuration
|
|
* @param data Data descriptor
|
|
* @param flags ADAM descriptor flag, used to indicate to create multiple or single descriptor, please
|
|
* reference _usdhc_adma_flag
|
|
* @retval kStatus_OutOfRange ADMA descriptor table length isn't enough to describe data.
|
|
* @retval kStatus_Success Operate successfully.
|
|
*/
|
|
status_t USDHC_SetAdmaTableConfig(USDHC_Type *base,
|
|
usdhc_adma_config_t *dmaConfig,
|
|
usdhc_data_t *dataConfig,
|
|
uint32_t flags);
|
|
|
|
/*!
|
|
* @brief Internal DMA configuration.
|
|
* This function is used to config the USDHC DMA related registers.
|
|
* @param base USDHC peripheral base address.
|
|
* @param adma configuration
|
|
* @param dataAddr tranfer data address, a simple DMA parameter, if ADMA is used, leave it to NULL.
|
|
* @param enAutoCmd23 flag to indicate Auto CMD23 is enable or not, a simple DMA parameter,if ADMA is used, leave it to
|
|
* false.
|
|
* @retval kStatus_OutOfRange ADMA descriptor table length isn't enough to describe data.
|
|
* @retval kStatus_Success Operate successfully.
|
|
*/
|
|
status_t USDHC_SetInternalDmaConfig(USDHC_Type *base,
|
|
usdhc_adma_config_t *dmaConfig,
|
|
const uint32_t *dataAddr,
|
|
bool enAutoCmd23);
|
|
|
|
/*!
|
|
* @brief Sets the ADMA2 descriptor table configuration.
|
|
*
|
|
* @param admaTable Adma table address.
|
|
* @param admaTableWords Adma table length.
|
|
* @param dataBufferAddr Data buffer address.
|
|
* @param dataBytes Data Data length.
|
|
* @param flags ADAM descriptor flag, used to indicate to create multiple or single descriptor, please
|
|
* reference _usdhc_adma_flag.
|
|
* @retval kStatus_OutOfRange ADMA descriptor table length isn't enough to describe data.
|
|
* @retval kStatus_Success Operate successfully.
|
|
*/
|
|
status_t USDHC_SetADMA2Descriptor(
|
|
uint32_t *admaTable, uint32_t admaTableWords, const uint32_t *dataBufferAddr, uint32_t dataBytes, uint32_t flags);
|
|
|
|
/*!
|
|
* @brief Sets the ADMA1 descriptor table configuration.
|
|
*
|
|
* @param admaTable Adma table address.
|
|
* @param admaTableWords Adma table length.
|
|
* @param dataBufferAddr Data buffer address.
|
|
* @param dataBytes Data length.
|
|
* @param flags ADAM descriptor flag, used to indicate to create multiple or single descriptor, please
|
|
* reference _usdhc_adma_flag.
|
|
* @retval kStatus_OutOfRange ADMA descriptor table length isn't enough to describe data.
|
|
* @retval kStatus_Success Operate successfully.
|
|
*/
|
|
status_t USDHC_SetADMA1Descriptor(
|
|
uint32_t *admaTable, uint32_t admaTableWords, const uint32_t *dataBufferAddr, uint32_t dataBytes, uint32_t flags);
|
|
|
|
/*!
|
|
* @brief enable internal DMA.
|
|
*
|
|
* @param base USDHC peripheral base address.
|
|
* @param enable enable or disable flag
|
|
*/
|
|
static inline void USDHC_EnableInternalDMA(USDHC_Type *base, bool enable)
|
|
{
|
|
if (enable)
|
|
{
|
|
base->MIX_CTRL |= USDHC_MIX_CTRL_DMAEN_MASK;
|
|
}
|
|
else
|
|
{
|
|
base->MIX_CTRL &= ~USDHC_MIX_CTRL_DMAEN_MASK;
|
|
base->PROT_CTRL &= ~USDHC_PROT_CTRL_DMASEL_MASK;
|
|
}
|
|
}
|
|
|
|
/* @} */
|
|
|
|
/*!
|
|
* @name Interrupts
|
|
* @{
|
|
*/
|
|
|
|
/*!
|
|
* @brief Enables the interrupt status.
|
|
*
|
|
* @param base USDHC peripheral base address.
|
|
* @param mask Interrupt status flags mask(_usdhc_interrupt_status_flag).
|
|
*/
|
|
static inline void USDHC_EnableInterruptStatus(USDHC_Type *base, uint32_t mask)
|
|
{
|
|
base->INT_STATUS_EN |= mask;
|
|
}
|
|
|
|
/*!
|
|
* @brief Disables the interrupt status.
|
|
*
|
|
* @param base USDHC peripheral base address.
|
|
* @param mask The interrupt status flags mask(_usdhc_interrupt_status_flag).
|
|
*/
|
|
static inline void USDHC_DisableInterruptStatus(USDHC_Type *base, uint32_t mask)
|
|
{
|
|
base->INT_STATUS_EN &= ~mask;
|
|
}
|
|
|
|
/*!
|
|
* @brief Enables the interrupt signal corresponding to the interrupt status flag.
|
|
*
|
|
* @param base USDHC peripheral base address.
|
|
* @param mask The interrupt status flags mask(_usdhc_interrupt_status_flag).
|
|
*/
|
|
static inline void USDHC_EnableInterruptSignal(USDHC_Type *base, uint32_t mask)
|
|
{
|
|
base->INT_SIGNAL_EN |= mask;
|
|
}
|
|
|
|
/*!
|
|
* @brief Disables the interrupt signal corresponding to the interrupt status flag.
|
|
*
|
|
* @param base USDHC peripheral base address.
|
|
* @param mask The interrupt status flags mask(_usdhc_interrupt_status_flag).
|
|
*/
|
|
static inline void USDHC_DisableInterruptSignal(USDHC_Type *base, uint32_t mask)
|
|
{
|
|
base->INT_SIGNAL_EN &= ~mask;
|
|
}
|
|
|
|
/* @} */
|
|
|
|
/*!
|
|
* @name Status
|
|
* @{
|
|
*/
|
|
|
|
/*!
|
|
* @brief Gets the current interrupt status.
|
|
*
|
|
* @param base USDHC peripheral base address.
|
|
* @return Current interrupt status flags mask(_usdhc_interrupt_status_flag).
|
|
*/
|
|
static inline uint32_t USDHC_GetInterruptStatusFlags(USDHC_Type *base)
|
|
{
|
|
return base->INT_STATUS;
|
|
}
|
|
|
|
/*!
|
|
* @brief Clears a specified interrupt status.
|
|
* write 1 clears
|
|
* @param base USDHC peripheral base address.
|
|
* @param mask The interrupt status flags mask(_usdhc_interrupt_status_flag).
|
|
*/
|
|
static inline void USDHC_ClearInterruptStatusFlags(USDHC_Type *base, uint32_t mask)
|
|
{
|
|
base->INT_STATUS = mask;
|
|
}
|
|
|
|
/*!
|
|
* @brief Gets the status of auto command 12 error.
|
|
*
|
|
* @param base USDHC peripheral base address.
|
|
* @return Auto command 12 error status flags mask(_usdhc_auto_command12_error_status_flag).
|
|
*/
|
|
static inline uint32_t USDHC_GetAutoCommand12ErrorStatusFlags(USDHC_Type *base)
|
|
{
|
|
return base->AUTOCMD12_ERR_STATUS;
|
|
}
|
|
|
|
/*!
|
|
* @brief Gets the status of the ADMA error.
|
|
*
|
|
* @param base USDHC peripheral base address.
|
|
* @return ADMA error status flags mask(_usdhc_adma_error_status_flag).
|
|
*/
|
|
static inline uint32_t USDHC_GetAdmaErrorStatusFlags(USDHC_Type *base)
|
|
{
|
|
return base->ADMA_ERR_STATUS & 0xFU;
|
|
}
|
|
|
|
/*!
|
|
* @brief Gets a present status.
|
|
*
|
|
* This function gets the present USDHC's status except for an interrupt status and an error status.
|
|
*
|
|
* @param base USDHC peripheral base address.
|
|
* @return Present USDHC's status flags mask(_usdhc_present_status_flag).
|
|
*/
|
|
static inline uint32_t USDHC_GetPresentStatusFlags(USDHC_Type *base)
|
|
{
|
|
return base->PRES_STATE;
|
|
}
|
|
|
|
/* @} */
|
|
|
|
/*!
|
|
* @name Bus Operations
|
|
* @{
|
|
*/
|
|
|
|
/*!
|
|
* @brief Gets the capability information.
|
|
*
|
|
* @param base USDHC peripheral base address.
|
|
* @param capability Structure to save capability information.
|
|
*/
|
|
void USDHC_GetCapability(USDHC_Type *base, usdhc_capability_t *capability);
|
|
|
|
/*!
|
|
* @brief force the card clock on.
|
|
*
|
|
* @param base USDHC peripheral base address.
|
|
* @param enable/disable flag.
|
|
*/
|
|
static inline void USDHC_ForceClockOn(USDHC_Type *base, bool enable)
|
|
{
|
|
if (enable)
|
|
{
|
|
base->VEND_SPEC |= USDHC_VEND_SPEC_FRC_SDCLK_ON_MASK;
|
|
}
|
|
else
|
|
{
|
|
base->VEND_SPEC &= ~USDHC_VEND_SPEC_FRC_SDCLK_ON_MASK;
|
|
}
|
|
}
|
|
|
|
/*!
|
|
* @brief Sets the SD bus clock frequency.
|
|
*
|
|
* @param base USDHC peripheral base address.
|
|
* @param srcClock_Hz USDHC source clock frequency united in Hz.
|
|
* @param busClock_Hz SD bus clock frequency united in Hz.
|
|
*
|
|
* @return The nearest frequency of busClock_Hz configured to SD bus.
|
|
*/
|
|
uint32_t USDHC_SetSdClock(USDHC_Type *base, uint32_t srcClock_Hz, uint32_t busClock_Hz);
|
|
|
|
/*!
|
|
* @brief Sends 80 clocks to the card to set it to the active state.
|
|
*
|
|
* This function must be called each time the card is inserted to ensure that the card can receive the command
|
|
* correctly.
|
|
*
|
|
* @param base USDHC peripheral base address.
|
|
* @param timeout Timeout to initialize card.
|
|
* @retval true Set card active successfully.
|
|
* @retval false Set card active failed.
|
|
*/
|
|
bool USDHC_SetCardActive(USDHC_Type *base, uint32_t timeout);
|
|
|
|
/*!
|
|
* @brief trigger a hardware reset.
|
|
*
|
|
* @param base USDHC peripheral base address.
|
|
* @param 1 or 0 level
|
|
*/
|
|
static inline void USDHC_AssertHardwareReset(USDHC_Type *base, bool high)
|
|
{
|
|
if (high)
|
|
{
|
|
base->SYS_CTRL |= USDHC_SYS_CTRL_IPP_RST_N_MASK;
|
|
}
|
|
else
|
|
{
|
|
base->SYS_CTRL &= ~USDHC_SYS_CTRL_IPP_RST_N_MASK;
|
|
}
|
|
}
|
|
|
|
/*!
|
|
* @brief Sets the data transfer width.
|
|
*
|
|
* @param base USDHC peripheral base address.
|
|
* @param width Data transfer width.
|
|
*/
|
|
static inline void USDHC_SetDataBusWidth(USDHC_Type *base, usdhc_data_bus_width_t width)
|
|
{
|
|
base->PROT_CTRL = ((base->PROT_CTRL & ~USDHC_PROT_CTRL_DTW_MASK) | USDHC_PROT_CTRL_DTW(width));
|
|
}
|
|
|
|
/*!
|
|
* @brief Fills the data port.
|
|
*
|
|
* This function is used to implement the data transfer by Data Port instead of DMA.
|
|
*
|
|
* @param base USDHC peripheral base address.
|
|
* @param data The data about to be sent.
|
|
*/
|
|
static inline void USDHC_WriteData(USDHC_Type *base, uint32_t data)
|
|
{
|
|
base->DATA_BUFF_ACC_PORT = data;
|
|
}
|
|
|
|
/*!
|
|
* @brief Retrieves the data from the data port.
|
|
*
|
|
* This function is used to implement the data transfer by Data Port instead of DMA.
|
|
*
|
|
* @param base USDHC peripheral base address.
|
|
* @return The data has been read.
|
|
*/
|
|
static inline uint32_t USDHC_ReadData(USDHC_Type *base)
|
|
{
|
|
return base->DATA_BUFF_ACC_PORT;
|
|
}
|
|
|
|
/*!
|
|
* @brief send command function
|
|
*
|
|
* @param base USDHC peripheral base address.
|
|
* @param command configuration
|
|
*/
|
|
void USDHC_SendCommand(USDHC_Type *base, usdhc_command_t *command);
|
|
|
|
/*!
|
|
* @brief Enables or disables a wakeup event in low-power mode.
|
|
*
|
|
* @param base USDHC peripheral base address.
|
|
* @param mask Wakeup events mask(_usdhc_wakeup_event).
|
|
* @param enable True to enable, false to disable.
|
|
*/
|
|
static inline void USDHC_EnableWakeupEvent(USDHC_Type *base, uint32_t mask, bool enable)
|
|
{
|
|
if (enable)
|
|
{
|
|
base->PROT_CTRL |= mask;
|
|
}
|
|
else
|
|
{
|
|
base->PROT_CTRL &= ~mask;
|
|
}
|
|
}
|
|
|
|
/*!
|
|
* @brief detect card insert status.
|
|
*
|
|
* @param base USDHC peripheral base address.
|
|
* @param enable/disable flag
|
|
*/
|
|
static inline void USDHC_CardDetectByData3(USDHC_Type *base, bool enable)
|
|
{
|
|
if (enable)
|
|
{
|
|
base->PROT_CTRL |= USDHC_PROT_CTRL_D3CD_MASK;
|
|
}
|
|
else
|
|
{
|
|
base->PROT_CTRL &= ~USDHC_PROT_CTRL_D3CD_MASK;
|
|
}
|
|
}
|
|
|
|
/*!
|
|
* @brief detect card insert status.
|
|
*
|
|
* @param base USDHC peripheral base address.
|
|
*/
|
|
static inline bool USDHC_DetectCardInsert(USDHC_Type *base)
|
|
{
|
|
return (base->PRES_STATE & kUSDHC_CardInsertedFlag) ? true : false;
|
|
}
|
|
|
|
/*!
|
|
* @brief Enables or disables the SDIO card control.
|
|
*
|
|
* @param base USDHC peripheral base address.
|
|
* @param mask SDIO card control flags mask(_usdhc_sdio_control_flag).
|
|
* @param enable True to enable, false to disable.
|
|
*/
|
|
static inline void USDHC_EnableSdioControl(USDHC_Type *base, uint32_t mask, bool enable)
|
|
{
|
|
if (enable)
|
|
{
|
|
base->PROT_CTRL |= mask;
|
|
}
|
|
else
|
|
{
|
|
base->PROT_CTRL &= ~mask;
|
|
}
|
|
}
|
|
|
|
/*!
|
|
* @brief Restarts a transaction which has stopped at the block GAP for the SDIO card.
|
|
*
|
|
* @param base USDHC peripheral base address.
|
|
*/
|
|
static inline void USDHC_SetContinueRequest(USDHC_Type *base)
|
|
{
|
|
base->PROT_CTRL |= USDHC_PROT_CTRL_CREQ_MASK;
|
|
}
|
|
|
|
/*!
|
|
* @brief Request stop at block gap function.
|
|
*
|
|
* @param base USDHC peripheral base address.
|
|
* @param enable true to stop at block gap, false to normal transfer
|
|
*/
|
|
static inline void USDHC_RequestStopAtBlockGap(USDHC_Type *base, bool enable)
|
|
{
|
|
if (enable)
|
|
{
|
|
base->PROT_CTRL |= USDHC_PROT_CTRL_SABGREQ_MASK;
|
|
}
|
|
else
|
|
{
|
|
base->PROT_CTRL &= ~USDHC_PROT_CTRL_SABGREQ_MASK;
|
|
}
|
|
}
|
|
|
|
/*!
|
|
* @brief Configures the MMC boot feature.
|
|
*
|
|
* Example:
|
|
@code
|
|
usdhc_boot_config_t config;
|
|
config.ackTimeoutCount = 4;
|
|
config.bootMode = kUSDHC_BootModeNormal;
|
|
config.blockCount = 5;
|
|
config.enableBootAck = true;
|
|
config.enableBoot = true;
|
|
config.enableAutoStopAtBlockGap = true;
|
|
USDHC_SetMmcBootConfig(USDHC, &config);
|
|
@endcode
|
|
*
|
|
* @param base USDHC peripheral base address.
|
|
* @param config The MMC boot configuration information.
|
|
*/
|
|
void USDHC_SetMmcBootConfig(USDHC_Type *base, const usdhc_boot_config_t *config);
|
|
|
|
/*!
|
|
* @brief Enables or disables the mmc boot mode.
|
|
*
|
|
* @param base USDHC peripheral base address.
|
|
* @param enable True to enable, false to disable.
|
|
*/
|
|
static inline void USDHC_EnableMmcBoot(USDHC_Type *base, bool enable)
|
|
{
|
|
if (enable)
|
|
{
|
|
base->MMC_BOOT |= USDHC_MMC_BOOT_BOOT_EN_MASK;
|
|
}
|
|
else
|
|
{
|
|
base->MMC_BOOT &= ~USDHC_MMC_BOOT_BOOT_EN_MASK;
|
|
}
|
|
}
|
|
|
|
/*!
|
|
* @brief Forces generating events according to the given mask.
|
|
*
|
|
* @param base USDHC peripheral base address.
|
|
* @param mask The force events mask(_usdhc_force_event).
|
|
*/
|
|
static inline void USDHC_SetForceEvent(USDHC_Type *base, uint32_t mask)
|
|
{
|
|
base->FORCE_EVENT = mask;
|
|
}
|
|
|
|
/*!
|
|
* @brief select the usdhc output voltage
|
|
*
|
|
* @param base USDHC peripheral base address.
|
|
* @param true 1.8V, false 3.0V
|
|
*/
|
|
static inline void UDSHC_SelectVoltage(USDHC_Type *base, bool en18v)
|
|
{
|
|
if (en18v)
|
|
{
|
|
base->VEND_SPEC |= USDHC_VEND_SPEC_VSELECT_MASK;
|
|
}
|
|
else
|
|
{
|
|
base->VEND_SPEC &= ~USDHC_VEND_SPEC_VSELECT_MASK;
|
|
}
|
|
}
|
|
|
|
#if defined(FSL_FEATURE_USDHC_HAS_SDR50_MODE) && (FSL_FEATURE_USDHC_HAS_SDR50_MODE)
|
|
/*!
|
|
* @brief check the SDR50 mode request tuning bit
|
|
* When this bit set, user should call USDHC_StandardTuning function
|
|
* @param base USDHC peripheral base address.
|
|
*/
|
|
static inline bool USDHC_RequestTuningForSDR50(USDHC_Type *base)
|
|
{
|
|
return base->HOST_CTRL_CAP & USDHC_HOST_CTRL_CAP_USE_TUNING_SDR50_MASK ? true : false;
|
|
}
|
|
|
|
/*!
|
|
* @brief check the request re-tuning bit
|
|
* When this bit is set, user should do manual tuning or standard tuning function
|
|
* @param base USDHC peripheral base address.
|
|
*/
|
|
static inline bool USDHC_RequestReTuning(USDHC_Type *base)
|
|
{
|
|
return base->PRES_STATE & USDHC_PRES_STATE_RTR_MASK ? true : false;
|
|
}
|
|
|
|
/*!
|
|
* @brief the SDR104 mode auto tuning enable and disable
|
|
* This function should call after tuning function execute pass, auto tuning will handle
|
|
* by hardware
|
|
* @param base USDHC peripheral base address.
|
|
* @param enable/disable flag
|
|
*/
|
|
static inline void USDHC_EnableAutoTuning(USDHC_Type *base, bool enable)
|
|
{
|
|
if (enable)
|
|
{
|
|
base->MIX_CTRL |= USDHC_MIX_CTRL_AUTO_TUNE_EN_MASK;
|
|
}
|
|
else
|
|
{
|
|
base->MIX_CTRL &= ~USDHC_MIX_CTRL_AUTO_TUNE_EN_MASK;
|
|
}
|
|
}
|
|
|
|
/*!
|
|
* @brief the config the re-tuning timer for mode 1 and mode 3
|
|
* This timer is used for standard tuning auto re-tuning,
|
|
* @param base USDHC peripheral base address.
|
|
* @param timer counter value
|
|
*/
|
|
static inline void USDHC_SetRetuningTimer(USDHC_Type *base, uint32_t counter)
|
|
{
|
|
base->HOST_CTRL_CAP &= ~USDHC_HOST_CTRL_CAP_TIME_COUNT_RETUNING_MASK;
|
|
base->HOST_CTRL_CAP |= USDHC_HOST_CTRL_CAP_TIME_COUNT_RETUNING(counter);
|
|
}
|
|
|
|
/*!
|
|
* @brief the auto tuning enbale for CMD/DATA line
|
|
*
|
|
* @param base USDHC peripheral base address.
|
|
*/
|
|
void USDHC_EnableAutoTuningForCmdAndData(USDHC_Type *base);
|
|
|
|
/*!
|
|
* @brief manual tuning trigger or abort
|
|
* User should handle the tuning cmd and find the boundary of the delay
|
|
* then calucate a average value which will be config to the CLK_TUNE_CTRL_STATUS
|
|
* This function should called before USDHC_AdjustDelayforSDR104 function
|
|
* @param base USDHC peripheral base address.
|
|
* @param tuning enable flag
|
|
*/
|
|
void USDHC_EnableManualTuning(USDHC_Type *base, bool enable);
|
|
|
|
/*!
|
|
* @brief the SDR104 mode delay setting adjust
|
|
* This function should called after USDHC_ManualTuningForSDR104
|
|
* @param base USDHC peripheral base address.
|
|
* @param delay setting configuration
|
|
* @retval kStatus_Fail config the delay setting fail
|
|
* @retval kStatus_Success config the delay setting success
|
|
*/
|
|
status_t USDHC_AdjustDelayForManualTuning(USDHC_Type *base, uint32_t delay);
|
|
|
|
/*!
|
|
* @brief the enable standard tuning function
|
|
* The standard tuning window and tuning counter use the default config
|
|
* tuning cmd is send by the software, user need to check the tuning result
|
|
* can be used for SDR50,SDR104,HS200 mode tuning
|
|
* @param base USDHC peripheral base address.
|
|
* @param tuning start tap
|
|
* @param tuning step
|
|
* @param enable/disable flag
|
|
*/
|
|
void USDHC_EnableStandardTuning(USDHC_Type *base, uint32_t tuningStartTap, uint32_t step, bool enable);
|
|
|
|
/*!
|
|
* @brief Get execute std tuning status
|
|
*
|
|
* @param base USDHC peripheral base address.
|
|
*/
|
|
static inline uint32_t USDHC_GetExecuteStdTuningStatus(USDHC_Type *base)
|
|
{
|
|
return (base->AUTOCMD12_ERR_STATUS & USDHC_AUTOCMD12_ERR_STATUS_EXECUTE_TUNING_MASK);
|
|
}
|
|
|
|
/*!
|
|
* @brief check std tuning result
|
|
*
|
|
* @param base USDHC peripheral base address.
|
|
*/
|
|
static inline uint32_t USDHC_CheckStdTuningResult(USDHC_Type *base)
|
|
{
|
|
return (base->AUTOCMD12_ERR_STATUS & USDHC_AUTOCMD12_ERR_STATUS_SMP_CLK_SEL_MASK);
|
|
}
|
|
|
|
/*!
|
|
* @brief check tuning error
|
|
*
|
|
* @param base USDHC peripheral base address.
|
|
*/
|
|
static inline uint32_t USDHC_CheckTuningError(USDHC_Type *base)
|
|
{
|
|
return (base->CLK_TUNE_CTRL_STATUS &
|
|
(USDHC_CLK_TUNE_CTRL_STATUS_NXT_ERR_MASK | USDHC_CLK_TUNE_CTRL_STATUS_PRE_ERR_MASK));
|
|
}
|
|
|
|
#endif
|
|
/*!
|
|
* @brief the enable/disable DDR mode
|
|
*
|
|
* @param base USDHC peripheral base address.
|
|
* @param enable/disable flag
|
|
* @param nibble position
|
|
*/
|
|
void USDHC_EnableDDRMode(USDHC_Type *base, bool enable, uint32_t nibblePos);
|
|
|
|
/*!
|
|
* @brief the enable/disable HS400 mode
|
|
*
|
|
* @param base USDHC peripheral base address.
|
|
* @param enable/disable flag
|
|
*/
|
|
#if FSL_FEATURE_USDHC_HAS_HS400_MODE
|
|
static inline void USDHC_EnableHS400Mode(USDHC_Type *base, bool enable)
|
|
{
|
|
if (enable)
|
|
{
|
|
base->MIX_CTRL |= USDHC_MIX_CTRL_HS400_MODE_MASK;
|
|
}
|
|
else
|
|
{
|
|
base->MIX_CTRL &= ~USDHC_MIX_CTRL_HS400_MODE_MASK;
|
|
}
|
|
}
|
|
|
|
/*!
|
|
* @brief reset the strobe DLL
|
|
*
|
|
* @param base USDHC peripheral base address.
|
|
*/
|
|
static inline void USDHC_ResetStrobeDLL(USDHC_Type *base)
|
|
{
|
|
base->STROBE_DLL_CTRL |= USDHC_STROBE_DLL_CTRL_STROBE_DLL_CTRL_RESET_MASK;
|
|
}
|
|
|
|
/*!
|
|
* @brief enable/disable the strobe DLL
|
|
*
|
|
* @param base USDHC peripheral base address.
|
|
* @param enable/disable flag
|
|
*/
|
|
static inline void USDHC_EnableStrobeDLL(USDHC_Type *base, bool enable)
|
|
{
|
|
if (enable)
|
|
{
|
|
base->STROBE_DLL_CTRL |= USDHC_STROBE_DLL_CTRL_STROBE_DLL_CTRL_ENABLE_MASK;
|
|
}
|
|
else
|
|
{
|
|
base->STROBE_DLL_CTRL &= ~USDHC_STROBE_DLL_CTRL_STROBE_DLL_CTRL_ENABLE_MASK;
|
|
}
|
|
}
|
|
|
|
/*!
|
|
* @brief config the strobe DLL delay target and update interval
|
|
*
|
|
* @param base USDHC peripheral base address.
|
|
* @param delay target
|
|
* @param update interval
|
|
*/
|
|
static inline void USDHC_ConfigStrobeDLL(USDHC_Type *base, uint32_t delayTarget, uint32_t updateInterval)
|
|
{
|
|
base->STROBE_DLL_CTRL &= (USDHC_STROBE_DLL_CTRL_STROBE_DLL_CTRL_SLV_UPDATE_INT_MASK |
|
|
USDHC_STROBE_DLL_CTRL_STROBE_DLL_CTRL_SLV_DLY_TARGET_MASK);
|
|
|
|
base->STROBE_DLL_CTRL |= USDHC_STROBE_DLL_CTRL_STROBE_DLL_CTRL_SLV_UPDATE_INT(updateInterval) |
|
|
USDHC_STROBE_DLL_CTRL_STROBE_DLL_CTRL_SLV_DLY_TARGET(delayTarget);
|
|
}
|
|
|
|
/*!
|
|
* @brief get the strobe DLL status
|
|
*
|
|
* @param base USDHC peripheral base address.
|
|
*/
|
|
static inline uint32_t USDHC_GetStrobeDLLStatus(USDHC_Type *base)
|
|
{
|
|
return base->STROBE_DLL_STATUS;
|
|
}
|
|
|
|
#endif
|
|
|
|
/* @} */
|
|
|
|
/*!
|
|
* @name Transactional
|
|
* @{
|
|
*/
|
|
|
|
/*!
|
|
* @brief Transfers the command/data using a blocking method.
|
|
*
|
|
* This function waits until the command response/data is received or the USDHC encounters an error by polling the
|
|
* status
|
|
* flag.
|
|
* The application must not call this API in multiple threads at the same time. Because of that this API doesn't support
|
|
* the re-entry mechanism.
|
|
*
|
|
* @note There is no need to call the API 'USDHC_TransferCreateHandle' when calling this API.
|
|
*
|
|
* @param base USDHC peripheral base address.
|
|
* @param adma configuration
|
|
* @param transfer Transfer content.
|
|
* @retval kStatus_InvalidArgument Argument is invalid.
|
|
* @retval kStatus_USDHC_PrepareAdmaDescriptorFailed Prepare ADMA descriptor failed.
|
|
* @retval kStatus_USDHC_SendCommandFailed Send command failed.
|
|
* @retval kStatus_USDHC_TransferDataFailed Transfer data failed.
|
|
* @retval kStatus_Success Operate successfully.
|
|
*/
|
|
status_t USDHC_TransferBlocking(USDHC_Type *base, usdhc_adma_config_t *dmaConfig, usdhc_transfer_t *transfer);
|
|
|
|
/*!
|
|
* @brief Creates the USDHC handle.
|
|
*
|
|
* @param base USDHC peripheral base address.
|
|
* @param handle USDHC handle pointer.
|
|
* @param callback Structure pointer to contain all callback functions.
|
|
* @param userData Callback function parameter.
|
|
*/
|
|
void USDHC_TransferCreateHandle(USDHC_Type *base,
|
|
usdhc_handle_t *handle,
|
|
const usdhc_transfer_callback_t *callback,
|
|
void *userData);
|
|
|
|
/*!
|
|
* @brief Transfers the command/data using an interrupt and an asynchronous method.
|
|
*
|
|
* This function sends a command and data and returns immediately. It doesn't wait the transfer complete or encounter an
|
|
* error.
|
|
* The application must not call this API in multiple threads at the same time. Because of that this API doesn't support
|
|
* the re-entry mechanism.
|
|
*
|
|
* @note Call the API 'USDHC_TransferCreateHandle' when calling this API.
|
|
*
|
|
* @param base USDHC peripheral base address.
|
|
* @param handle USDHC handle.
|
|
* @param adma configuration.
|
|
* @param transfer Transfer content.
|
|
* @retval kStatus_InvalidArgument Argument is invalid.
|
|
* @retval kStatus_USDHC_BusyTransferring Busy transferring.
|
|
* @retval kStatus_USDHC_PrepareAdmaDescriptorFailed Prepare ADMA descriptor failed.
|
|
* @retval kStatus_Success Operate successfully.
|
|
*/
|
|
status_t USDHC_TransferNonBlocking(USDHC_Type *base,
|
|
usdhc_handle_t *handle,
|
|
usdhc_adma_config_t *dmaConfig,
|
|
usdhc_transfer_t *transfer);
|
|
|
|
/*!
|
|
* @brief IRQ handler for the USDHC.
|
|
*
|
|
* This function deals with the IRQs on the given host controller.
|
|
*
|
|
* @param base USDHC peripheral base address.
|
|
* @param handle USDHC handle.
|
|
*/
|
|
void USDHC_TransferHandleIRQ(USDHC_Type *base, usdhc_handle_t *handle);
|
|
|
|
/* @} */
|
|
|
|
#if defined(__cplusplus)
|
|
}
|
|
#endif
|
|
/*! @} */
|
|
|
|
#endif /* _FSL_USDHC_H_*/
|