410 lines
14 KiB
C
410 lines
14 KiB
C
/*
|
|
* File : usart.c
|
|
* This file is part of RT-Thread RTOS
|
|
* COPYRIGHT (C) 2009, RT-Thread Development Team
|
|
*
|
|
* The license and distribution terms for this file may be
|
|
* found in the file LICENSE in this distribution or at
|
|
* http://www.rt-thread.org/license/LICENSE
|
|
*
|
|
* Change Logs:
|
|
* Date Author Notes
|
|
* 2009-01-05 Bernard the first version
|
|
* 2010-03-29 Bernard remove interrupt Tx and DMA Rx mode
|
|
* 2012-02-08 aozima update for F4.
|
|
*/
|
|
|
|
#include "stm32f4xx.h"
|
|
#include "usart.h"
|
|
#include "board.h"
|
|
#include <serial.h>
|
|
|
|
/*
|
|
* Use UART1 as console output and finsh input
|
|
* interrupt Rx and poll Tx (stream mode)
|
|
*
|
|
* Use UART2 with interrupt Rx and poll Tx
|
|
* Use UART3 with DMA Tx and interrupt Rx -- DMA channel 2
|
|
*
|
|
* USART DMA setting on STM32
|
|
* USART1 Tx --> DMA Channel 4
|
|
* USART1 Rx --> DMA Channel 5
|
|
* USART2 Tx --> DMA Channel 7
|
|
* USART2 Rx --> DMA Channel 6
|
|
* USART3 Tx --> DMA Channel 2
|
|
* USART3 Rx --> DMA Channel 3
|
|
*/
|
|
|
|
#ifdef RT_USING_UART1
|
|
struct stm32_serial_int_rx uart1_int_rx;
|
|
struct stm32_serial_device uart1 =
|
|
{
|
|
USART1,
|
|
&uart1_int_rx,
|
|
RT_NULL
|
|
};
|
|
struct rt_device uart1_device;
|
|
#endif
|
|
|
|
#ifdef RT_USING_UART2
|
|
struct stm32_serial_int_rx uart2_int_rx;
|
|
struct stm32_serial_device uart2 =
|
|
{
|
|
USART2,
|
|
&uart2_int_rx,
|
|
RT_NULL
|
|
};
|
|
struct rt_device uart2_device;
|
|
#endif
|
|
|
|
#ifdef RT_USING_UART3
|
|
struct stm32_serial_int_rx uart3_int_rx;
|
|
struct stm32_serial_dma_tx uart3_dma_tx;
|
|
struct stm32_serial_device uart3 =
|
|
{
|
|
USART3,
|
|
&uart3_int_rx,
|
|
&uart3_dma_tx
|
|
};
|
|
struct rt_device uart3_device;
|
|
#endif
|
|
|
|
#ifdef RT_USING_UART6
|
|
struct stm32_serial_int_rx uart6_int_rx;
|
|
struct stm32_serial_device uart6 =
|
|
{
|
|
USART6,
|
|
&uart6_int_rx,
|
|
RT_NULL
|
|
};
|
|
struct rt_device uart6_device;
|
|
#endif
|
|
|
|
//#define USART1_DR_Base 0x40013804
|
|
//#define USART2_DR_Base 0x40004404
|
|
//#define USART3_DR_Base 0x40004804
|
|
|
|
/* USART1_REMAP = 0 */
|
|
#define UART1_GPIO_TX GPIO_Pin_9
|
|
#define UART1_TX_PIN_SOURCE GPIO_PinSource9
|
|
#define UART1_GPIO_RX GPIO_Pin_10
|
|
#define UART1_RX_PIN_SOURCE GPIO_PinSource10
|
|
#define UART1_GPIO GPIOA
|
|
#define UART1_GPIO_RCC RCC_AHB1Periph_GPIOA
|
|
#define RCC_APBPeriph_UART1 RCC_APB2Periph_USART1
|
|
#define UART1_TX_DMA DMA1_Channel4
|
|
#define UART1_RX_DMA DMA1_Channel5
|
|
|
|
#define UART2_GPIO_TX GPIO_Pin_2
|
|
#define UART2_TX_PIN_SOURCE GPIO_PinSource2
|
|
#define UART2_GPIO_RX GPIO_Pin_3
|
|
#define UART2_RX_PIN_SOURCE GPIO_PinSource3
|
|
#define UART2_GPIO GPIOA
|
|
#define UART2_GPIO_RCC RCC_AHB1Periph_GPIOA
|
|
#define RCC_APBPeriph_UART2 RCC_APB1Periph_USART2
|
|
|
|
/* USART3_REMAP[1:0] = 00 */
|
|
#define UART3_GPIO_TX GPIO_Pin_10
|
|
#define UART3_TX_PIN_SOURCE GPIO_PinSource10
|
|
#define UART3_GPIO_RX GPIO_Pin_11
|
|
#define UART3_RX_PIN_SOURCE GPIO_PinSource11
|
|
#define UART3_GPIO GPIOB
|
|
#define UART3_GPIO_RCC RCC_AHB1Periph_GPIOB
|
|
#define RCC_APBPeriph_UART3 RCC_APB1Periph_USART3
|
|
#define UART3_TX_DMA DMA1_Stream1
|
|
#define UART3_RX_DMA DMA1_Stream3
|
|
|
|
#define UART6_GPIO_TX GPIO_Pin_6
|
|
#define UART6_TX_PIN_SOURCE GPIO_PinSource6
|
|
#define UART6_GPIO_RX GPIO_Pin_7
|
|
#define UART6_RX_PIN_SOURCE GPIO_PinSource7
|
|
#define UART6_GPIO GPIOC
|
|
#define UART6_GPIO_RCC RCC_AHB1Periph_GPIOC
|
|
#define RCC_APBPeriph_UART6 RCC_APB2Periph_USART6
|
|
|
|
static void RCC_Configuration(void)
|
|
{
|
|
#ifdef RT_USING_UART1
|
|
/* Enable USART2 GPIO clocks */
|
|
RCC_AHB1PeriphClockCmd(UART1_GPIO_RCC, ENABLE);
|
|
/* Enable USART2 clock */
|
|
RCC_APB2PeriphClockCmd(RCC_APBPeriph_UART1, ENABLE);
|
|
#endif
|
|
|
|
#ifdef RT_USING_UART2
|
|
/* Enable USART2 GPIO clocks */
|
|
RCC_AHB1PeriphClockCmd(UART2_GPIO_RCC, ENABLE);
|
|
/* Enable USART2 clock */
|
|
RCC_APB1PeriphClockCmd(RCC_APBPeriph_UART2, ENABLE);
|
|
#endif
|
|
|
|
#ifdef RT_USING_UART3
|
|
/* Enable USART3 GPIO clocks */
|
|
RCC_AHB1PeriphClockCmd(UART3_GPIO_RCC, ENABLE);
|
|
/* Enable USART3 clock */
|
|
RCC_APB1PeriphClockCmd(RCC_APBPeriph_UART3, ENABLE);
|
|
|
|
/* DMA clock enable */
|
|
RCC_APB1PeriphClockCmd(RCC_AHB1Periph_DMA1, ENABLE);
|
|
#endif
|
|
|
|
#ifdef RT_USING_UART6
|
|
/* Enable USART6 GPIO clocks */
|
|
RCC_AHB1PeriphClockCmd(UART6_GPIO_RCC, ENABLE);
|
|
/* Enable USART6 clock */
|
|
RCC_APB2PeriphClockCmd(RCC_APBPeriph_UART6, ENABLE);
|
|
#endif
|
|
}
|
|
|
|
static void GPIO_Configuration(void)
|
|
{
|
|
GPIO_InitTypeDef GPIO_InitStructure;
|
|
|
|
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
|
|
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
|
|
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP;
|
|
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
|
|
|
|
#ifdef RT_USING_UART1
|
|
/* Configure USART1 Rx/tx PIN */
|
|
GPIO_InitStructure.GPIO_Pin = UART1_GPIO_RX | UART1_GPIO_TX;
|
|
GPIO_Init(UART1_GPIO, &GPIO_InitStructure);
|
|
|
|
/* Connect alternate function */
|
|
GPIO_PinAFConfig(UART1_GPIO, UART1_TX_PIN_SOURCE, GPIO_AF_USART1);
|
|
GPIO_PinAFConfig(UART1_GPIO, UART1_RX_PIN_SOURCE, GPIO_AF_USART1);
|
|
#endif
|
|
|
|
#ifdef RT_USING_UART2
|
|
/* Configure USART2 Rx/tx PIN */
|
|
GPIO_InitStructure.GPIO_Pin = UART2_GPIO_TX | UART2_GPIO_RX;
|
|
GPIO_Init(UART2_GPIO, &GPIO_InitStructure);
|
|
|
|
/* Connect alternate function */
|
|
GPIO_PinAFConfig(UART2_GPIO, UART2_TX_PIN_SOURCE, GPIO_AF_USART2);
|
|
GPIO_PinAFConfig(UART2_GPIO, UART2_RX_PIN_SOURCE, GPIO_AF_USART2);
|
|
#endif
|
|
|
|
#ifdef RT_USING_UART3
|
|
/* Configure USART3 Rx/tx PIN */
|
|
GPIO_InitStructure.GPIO_Pin = UART3_GPIO_RX | UART3_GPIO_RX;
|
|
GPIO_Init(UART3_GPIO, &GPIO_InitStructure);
|
|
|
|
/* Connect alternate function */
|
|
GPIO_PinAFConfig(UART3_GPIO, UART3_TX_PIN_SOURCE, GPIO_AF_USART3);
|
|
GPIO_PinAFConfig(UART3_GPIO, UART3_RX_PIN_SOURCE, GPIO_AF_USART3);
|
|
#endif
|
|
|
|
#ifdef RT_USING_UART6
|
|
/* Configure USART6 Rx/tx PIN */
|
|
GPIO_InitStructure.GPIO_Pin = UART6_GPIO_TX | UART6_GPIO_RX;
|
|
GPIO_Init(UART6_GPIO, &GPIO_InitStructure);
|
|
|
|
/* Connect alternate function */
|
|
GPIO_PinAFConfig(UART6_GPIO, UART6_TX_PIN_SOURCE, GPIO_AF_USART6);
|
|
GPIO_PinAFConfig(UART6_GPIO, UART6_RX_PIN_SOURCE, GPIO_AF_USART6);
|
|
#endif
|
|
}
|
|
|
|
static void NVIC_Configuration(void)
|
|
{
|
|
NVIC_InitTypeDef NVIC_InitStructure;
|
|
|
|
#ifdef RT_USING_UART1
|
|
/* Enable the USART1 Interrupt */
|
|
NVIC_InitStructure.NVIC_IRQChannel = USART1_IRQn;
|
|
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
|
|
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
|
|
NVIC_Init(&NVIC_InitStructure);
|
|
#endif
|
|
|
|
#ifdef RT_USING_UART2
|
|
/* Enable the USART2 Interrupt */
|
|
NVIC_InitStructure.NVIC_IRQChannel = USART2_IRQn;
|
|
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1;
|
|
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 1;
|
|
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
|
|
NVIC_Init(&NVIC_InitStructure);
|
|
#endif
|
|
|
|
#ifdef RT_USING_UART3
|
|
/* Enable the USART3 Interrupt */
|
|
NVIC_InitStructure.NVIC_IRQChannel = USART3_IRQn;
|
|
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 1;
|
|
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
|
|
NVIC_Init(&NVIC_InitStructure);
|
|
|
|
/* Enable the DMA1 Channel2 Interrupt */
|
|
NVIC_InitStructure.NVIC_IRQChannel = DMA1_Stream1_IRQn;
|
|
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 1;
|
|
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
|
|
NVIC_Init(&NVIC_InitStructure);
|
|
#endif
|
|
|
|
#ifdef RT_USING_UART6
|
|
/* Enable the USART6 Interrupt */
|
|
NVIC_InitStructure.NVIC_IRQChannel = USART6_IRQn;
|
|
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1;
|
|
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 1;
|
|
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
|
|
NVIC_Init(&NVIC_InitStructure);
|
|
#endif
|
|
}
|
|
|
|
static void DMA_Configuration(void)
|
|
{
|
|
#if defined (RT_USING_UART3)
|
|
DMA_InitTypeDef DMA_InitStructure;
|
|
|
|
// /* Configure DMA Stream */
|
|
// DMA_InitStructure.DMA_Channel = DMA_CHANNEL;
|
|
// DMA_InitStructure.DMA_PeripheralBaseAddr = (uint32_t)SRC_Const_Buffer;
|
|
// DMA_InitStructure.DMA_Memory0BaseAddr = (uint32_t)DST_Buffer;
|
|
// DMA_InitStructure.DMA_DIR = DMA_DIR_MemoryToMemory;
|
|
// DMA_InitStructure.DMA_BufferSize = (uint32_t)BUFFER_SIZE;
|
|
// DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Enable;
|
|
// DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable;
|
|
// DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Word;
|
|
// DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_Word;
|
|
// DMA_InitStructure.DMA_Mode = DMA_Mode_Normal;
|
|
// DMA_InitStructure.DMA_Priority = DMA_Priority_High;
|
|
// DMA_InitStructure.DMA_FIFOMode = DMA_FIFOMode_Disable;
|
|
// DMA_InitStructure.DMA_FIFOThreshold = DMA_FIFOThreshold_Full;
|
|
// DMA_InitStructure.DMA_MemoryBurst = DMA_MemoryBurst_Single;
|
|
// DMA_InitStructure.DMA_PeripheralBurst = DMA_PeripheralBurst_Single;
|
|
// DMA_Init(DMA_STREAM, &DMA_InitStructure);
|
|
|
|
/* Configure DMA Stream */
|
|
DMA_InitStructure.DMA_Channel = DMA_Channel_0;
|
|
DMA_InitStructure.DMA_PeripheralBaseAddr = (uint32_t)(&USART3->DR);
|
|
DMA_InitStructure.DMA_Memory0BaseAddr = (uint32_t)0;
|
|
DMA_InitStructure.DMA_DIR = DMA_DIR_MemoryToPeripheral;
|
|
DMA_InitStructure.DMA_BufferSize = (uint32_t)0;
|
|
DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable;
|
|
DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable;
|
|
DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Word;
|
|
DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte;
|
|
DMA_InitStructure.DMA_Mode = DMA_Mode_Normal;
|
|
DMA_InitStructure.DMA_Priority = DMA_Priority_High;
|
|
DMA_InitStructure.DMA_FIFOMode = DMA_FIFOMode_Disable;
|
|
DMA_InitStructure.DMA_FIFOThreshold = DMA_FIFOThreshold_Full;
|
|
DMA_InitStructure.DMA_MemoryBurst = DMA_MemoryBurst_Single;
|
|
DMA_InitStructure.DMA_PeripheralBurst = DMA_PeripheralBurst_Single;
|
|
|
|
DMA_DeInit(UART3_TX_DMA);
|
|
DMA_Init(UART3_TX_DMA, &DMA_InitStructure);
|
|
|
|
// /* fill init structure */
|
|
// DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable;
|
|
// DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable;
|
|
// DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte;
|
|
// DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte;
|
|
// DMA_InitStructure.DMA_Mode = DMA_Mode_Normal;
|
|
// DMA_InitStructure.DMA_Priority = DMA_Priority_VeryHigh;
|
|
// DMA_InitStructure.DMA_M2M = DMA_M2M_Disable;
|
|
//
|
|
// /* DMA1 Channel5 (triggered by USART3 Tx event) Config */
|
|
// DMA_DeInit(UART3_TX_DMA);
|
|
// DMA_InitStructure.DMA_PeripheralBaseAddr = USART3_DR_Base;
|
|
// DMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralDST;
|
|
// DMA_InitStructure.DMA_MemoryBaseAddr = (u32)0;
|
|
// DMA_InitStructure.DMA_BufferSize = 0;
|
|
// DMA_Init(UART3_TX_DMA, &DMA_InitStructure);
|
|
DMA_ITConfig(UART3_TX_DMA, DMA_IT_TC | DMA_IT_TE, ENABLE);
|
|
// DMA_ClearFlag(DMA1_FLAG_TC5);
|
|
#endif
|
|
}
|
|
|
|
volatile USART_TypeDef * uart2_debug = USART2;
|
|
/*
|
|
* Init all related hardware in here
|
|
* rt_hw_serial_init() will register all supported USART device
|
|
*/
|
|
void rt_hw_usart_init()
|
|
{
|
|
USART_InitTypeDef USART_InitStructure;
|
|
|
|
RCC_Configuration();
|
|
|
|
GPIO_Configuration();
|
|
|
|
NVIC_Configuration();
|
|
|
|
DMA_Configuration();
|
|
|
|
/* uart init */
|
|
#ifdef RT_USING_UART1
|
|
USART_InitStructure.USART_BaudRate = 115200;
|
|
USART_InitStructure.USART_WordLength = USART_WordLength_8b;
|
|
USART_InitStructure.USART_StopBits = USART_StopBits_1;
|
|
USART_InitStructure.USART_Parity = USART_Parity_No;
|
|
USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
|
|
USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
|
|
USART_Init(USART1, &USART_InitStructure);
|
|
|
|
/* register uart1 */
|
|
rt_hw_serial_register(&uart1_device, "uart1",
|
|
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
|
|
&uart1);
|
|
|
|
/* enable interrupt */
|
|
USART_ITConfig(USART1, USART_IT_RXNE, ENABLE);
|
|
#endif
|
|
|
|
#ifdef RT_USING_UART2
|
|
USART_InitStructure.USART_BaudRate = 115200;
|
|
USART_InitStructure.USART_WordLength = USART_WordLength_8b;
|
|
USART_InitStructure.USART_StopBits = USART_StopBits_1;
|
|
USART_InitStructure.USART_Parity = USART_Parity_No;
|
|
USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
|
|
USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
|
|
USART_Init(USART2, &USART_InitStructure);
|
|
|
|
/* register uart2 */
|
|
rt_hw_serial_register(&uart2_device, "uart2",
|
|
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
|
|
&uart2);
|
|
|
|
/* Enable USART2 DMA Rx request */
|
|
USART_ITConfig(USART2, USART_IT_RXNE, ENABLE);
|
|
#endif
|
|
|
|
#ifdef RT_USING_UART3
|
|
USART_InitStructure.USART_BaudRate = 115200;
|
|
USART_InitStructure.USART_WordLength = USART_WordLength_8b;
|
|
USART_InitStructure.USART_StopBits = USART_StopBits_1;
|
|
USART_InitStructure.USART_Parity = USART_Parity_No;
|
|
USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
|
|
USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
|
|
USART_Init(USART3, &USART_InitStructure);
|
|
|
|
// uart3_dma_tx.dma_channel= UART3_TX_DMA;
|
|
|
|
/* register uart3 */
|
|
rt_hw_serial_register(&uart3_device, "uart3",
|
|
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_DMA_TX,
|
|
&uart3);
|
|
|
|
/* Enable USART3 DMA Tx request */
|
|
USART_DMACmd(USART3, USART_DMAReq_Tx , ENABLE);
|
|
|
|
/* enable interrupt */
|
|
USART_ITConfig(USART3, USART_IT_RXNE, ENABLE);
|
|
#endif
|
|
|
|
#ifdef RT_USING_UART6
|
|
USART_InitStructure.USART_BaudRate = 9600;
|
|
USART_InitStructure.USART_WordLength = USART_WordLength_8b;
|
|
USART_InitStructure.USART_StopBits = USART_StopBits_1;
|
|
USART_InitStructure.USART_Parity = USART_Parity_No;
|
|
USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
|
|
USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
|
|
USART_Init(USART6, &USART_InitStructure);
|
|
|
|
/* register uart6 */
|
|
rt_hw_serial_register(&uart6_device, "uart6",
|
|
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
|
|
&uart6);
|
|
#endif
|
|
}
|