libs/rt-thread
libs
/
rt-thread
4
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
rt-thread/bsp/nuvoton_nuc472/Libraries/StdDriver/inc/uart.h

401 lines
17 KiB
C
Raw Blame History

/**************************************************************************//**
* @file uart.h
* @version V1.00
* $Revision: 20 $
* $Date: 15/11/30 1:35p $
* @brief NUC472/NUC442 UART driver header file
*
* @note
* Copyright (C) 2013 Nuvoton Technology Corp. All rights reserved.
*****************************************************************************/
#ifndef __UART_H__
#define __UART_H__
#ifdef __cplusplus
extern "C"
{
#endif
/** @addtogroup NUC472_442_Device_Driver NUC472/NUC442 Device Driver
@{
*/
/** @addtogroup NUC472_442_UART_Driver UART Driver
@{
*/
/** @addtogroup NUC472_442_UART_EXPORTED_CONSTANTS UART Exported Constants
@{
*/
/*---------------------------------------------------------------------------------------------------------*/
/* UART_FCR constants definitions */
/*---------------------------------------------------------------------------------------------------------*/
#define UART_FIFO_RFITL_1BYTE (0x0 << UART_FIFO_RFITL_Pos) /*!< UART_FIFO setting to set RX FIFO Trigger Level to 1 byte */
#define UART_FIFO_RFITL_4BYTES (0x1 << UART_FIFO_RFITL_Pos) /*!< UART_FIFO setting to set RX FIFO Trigger Level to 4 bytes */
#define UART_FIFO_RFITL_8BYTES (0x2 << UART_FIFO_RFITL_Pos) /*!< UART_FIFO setting to set RX FIFO Trigger Level to 8 bytes */
#define UART_FIFO_RFITL_14BYTES (0x3 << UART_FIFO_RFITL_Pos) /*!< UART_FIFO setting to set RX FIFO Trigger Level to 14 bytes */
#define UART_FIFO_RTSTRGLV_1BYTE (0x0 << UART_FIFO_RTSTRGLV_Pos) /*!< UART_FIFO setting to set RTS Trigger Level to 1 byte */
#define UART_FIFO_RTSTRGLV_4BYTES (0x1 << UART_FIFO_RTSTRGLV_Pos) /*!< UART_FIFO setting to set RTS Trigger Level to 4 bytes */
#define UART_FIFO_RTSTRGLV_8BYTES (0x2 << UART_FIFO_RTSTRGLV_Pos) /*!< UART_FIFO setting to set RTS Trigger Level to 8 bytes */
#define UART_FIFO_RTSTRGLV_14BYTES (0x3 << UART_FIFO_RTSTRGLV_Pos) /*!< UART_FIFO setting to set RTS Trigger Level to 14 bytes */
/*---------------------------------------------------------------------------------------------------------*/
/* UART_LCR constants definitions */
/*---------------------------------------------------------------------------------------------------------*/
#define UART_WORD_LEN_5 (0) /*!< UART_LINE setting to set UART word length to 5 bits */
#define UART_WORD_LEN_6 (1) /*!< UART_LINE setting to set UART word length to 6 bits */
#define UART_WORD_LEN_7 (2) /*!< UART_LINE setting to set UART word length to 7 bits */
#define UART_WORD_LEN_8 (3) /*!< UART_LINE setting to set UART word length to 8 bits */
#define UART_PARITY_NONE (0x0 << UART_LINE_PBE_Pos) /*!< UART_LINE setting to set UART as no parity */
#define UART_PARITY_ODD (0x1 << UART_LINE_PBE_Pos) /*!< UART_LINE setting to set UART as odd parity */
#define UART_PARITY_EVEN (0x3 << UART_LINE_PBE_Pos) /*!< UART_LINE setting to set UART as even parity */
#define UART_PARITY_MARK (0x5 << UART_LINE_PBE_Pos) /*!< UART_LINE setting to keep parity bit as '1' */
#define UART_PARITY_SPACE (0x7 << UART_LINE_PBE_Pos) /*!< UART_LINE setting to keep parity bit as '0' */
#define UART_STOP_BIT_1 (0x0 << UART_LINE_NSB_Pos) /*!< UART_LINE setting for one stop bit */
#define UART_STOP_BIT_1_5 (0x1 << UART_LINE_NSB_Pos) /*!< UART_LINE setting for 1.5 stop bit when 5-bit word length */
#define UART_STOP_BIT_2 (0x1 << UART_LINE_NSB_Pos) /*!< UART_LINE setting for two stop bit when 6, 7, 8-bit word length */
/*---------------------------------------------------------------------------------------------------------*/
/* UART RTS LEVEL TRIGGER constants definitions */
/*---------------------------------------------------------------------------------------------------------*/
#define UART_RTS_IS_HIGH_LEV_TRG (0x1 << UART_MODEM_RTSACTLV_Pos) /*!< Set RTS is High Level Trigger */
#define UART_RTS_IS_LOW_LEV_TRG (0x0 << UART_MODEM_RTSACTLV_Pos) /*!< Set RTS is Low Level Trigger */
/*---------------------------------------------------------------------------------------------------------*/
/* UART CTS LEVEL TRIGGER constants definitions */
/*---------------------------------------------------------------------------------------------------------*/
#define UART_CTS_IS_HIGH_LEV_TRG (0x1 << UART_MODEMSTS_CTSACTLV_Pos) /*!< Set CTS is High Level Trigger */
#define UART_CTS_IS_LOW_LEV_TRG (0x0 << UART_MODEMSTS_CTSACTLV_Pos) /*!< Set CTS is Low Level Trigger */
/*---------------------------------------------------------------------------------------------------------*/
/* UART_FUNC_SEL constants definitions */
/*---------------------------------------------------------------------------------------------------------*/
#define UART_FUNCSEL_UART (0x0 << UART_FUNCSEL_FUNCSEL_Pos) /*!< UART_FUNCSEL setting to set UART Function (Default) */
#define UART_FUNCSEL_IrDA (0x2 << UART_FUNCSEL_FUNCSEL_Pos) /*!< UART_FUNCSEL setting to set IrDA Function */
#define UART_FUNCSEL_RS485 (0x3 << UART_FUNCSEL_FUNCSEL_Pos) /*!< UART_FUNCSEL setting to set RS485 Function */
/*---------------------------------------------------------------------------------------------------------*/
/* UART BAUDRATE MODE constants definitions */
/*---------------------------------------------------------------------------------------------------------*/
#define UART_BAUD_MODE0 (0) /*!< Set UART Baudrate Mode is Mode0 */
#define UART_BAUD_MODE2 (UART_BAUD_BAUDM1_Msk | UART_BAUD_BAUDM0_Msk) /*!< Set UART Baudrate Mode is Mode2 */
/*@}*/ /* end of group NUC472_442_UART_EXPORTED_CONSTANTS */
/** @addtogroup NUC472_442_UART_EXPORTED_FUNCTIONS UART Exported Functions
@{
*/
/**
* @brief Calculate UART baudrate mode0 divider
*
* @param[in] u32SrcFreq UART clock frequency
* @param[in] u32BaudRate Baudrate of UART module
*
* @return UART baudrate mode0 divider
* \hideinitializer
*
*/
#define UART_BAUD_MODE0_DIVIDER(u32SrcFreq, u32BaudRate) (((u32SrcFreq + (u32BaudRate*8)) / u32BaudRate >> 4)-2)
/**
* @brief Calculate UART baudrate mode2 divider
*
* @param[in] u32SrcFreq UART clock frequency
* @param[in] u32BaudRate Baudrate of UART module
*
* @return UART baudrate mode2 divider
* \hideinitializer
*/
#define UART_BAUD_MODE2_DIVIDER(u32SrcFreq, u32BaudRate) (((u32SrcFreq + (u32BaudRate/2)) / u32BaudRate)-2)
/**
* @brief Write Data to Tx data register
*
* @param[in] uart The base address of UART module.
* @param[in] u8Data Data byte to transmit
*
* @return None
* \hideinitializer
*/
#define UART_WRITE(uart, u8Data) (uart->DAT = (u8Data))
/**
* @brief Read Rx data register
*
* @param[in] uart The base address of UART module.
*
* @return The oldest data byte in RX FIFO
* \hideinitializer
*/
#define UART_READ(uart) (uart->DAT)
/**
* @brief Get Tx empty register value.
*
* @param[in] uart The base address of UART module
*
* @return Tx empty register value.
* \hideinitializer
*/
#define UART_GET_TX_EMPTY(uart) (uart->FIFOSTS & UART_FIFOSTS_TXEMPTY_Msk)
/**
* @brief Get Rx empty register value.
*
* @param[in] uart The base address of UART module
*
* @return Rx empty register value.
* \hideinitializer
*/
#define UART_GET_RX_EMPTY(uart) (uart->FIFOSTS & UART_FIFOSTS_RXEMPTY_Msk)
/**
* @brief Check specified uart port transmission is over.
*
* @param[in] uart The base address of UART module
*
* @return TE_Flag.
* \hideinitializer
*/
#define UART_IS_TX_EMPTY(uart) ((uart->FIFOSTS & UART_FIFOSTS_TXEMPTYF_Msk) >> UART_FIFOSTS_TXEMPTYF_Pos)
/**
* @brief Wait specified uart port transmission is over
*
* @param[in] uart The base address of UART module
*
* @return None
* \hideinitializer
*/
#define UART_WAIT_TX_EMPTY(uart) while(!(((uart->FIFOSTS) & UART_FIFOSTS_TXEMPTYF_Msk) >> UART_FIFOSTS_TXEMPTYF_Pos))
/**
* @brief Check RDA_IF is set or not
*
* @param[in] uart The base address of UART module
*
* @return
* 0 : The number of bytes in the RX FIFO is less than the RFITL
* 1 : The number of bytes in the RX FIFO equals or larger than RFITL
* \hideinitializer
*/
#define UART_IS_RX_READY(uart) ((uart->INTSTS & UART_INTSTS_RDAIF_Msk)>>UART_INTSTS_RDAIF_Pos)
/**
* @brief Check TX FIFO is full or not
*
* @param[in] uart The base address of UART module
*
* @return
* 1 = TX FIFO is full
* 0 = TX FIFO is not full
* \hideinitializer
*/
#define UART_IS_TX_FULL(uart) ((uart->FIFOSTS & UART_FIFOSTS_TXFULL_Msk)>>UART_FIFOSTS_TXFULL_Pos)
/**
* @brief Check RX FIFO is full or not
*
* @param[in] uart The base address of UART module
*
* @return
* 1 = RX FIFO is full
* 0 = RX FIFO is not full
* \hideinitializer
*
*/
#define UART_IS_RX_FULL(uart) ((uart->FIFOSTS & UART_FIFOSTS_RXFULL_Msk)>>UART_FIFOSTS_RXFULL_Pos)
/**
* @brief Get Tx full register value
*
* @param[in] uart The base address of UART module
*
* @return Tx full register value
* \hideinitializer
*/
#define UART_GET_TX_FULL(uart) (uart->FIFOSTS & UART_FIFOSTS_TXFULL_Msk)
/**
* @brief Get Rx full register value
*
* @param[in] uart The base address of UART module
*
* @return Rx full register value
* \hideinitializer
*/
#define UART_GET_RX_FULL(uart) (uart->FIFOSTS & UART_FIFOSTS_RXFULL_Msk)
/**
* @brief Enable specified interrupt
*
* @param[in] uart The base address of UART module
* @param[in] u32eIntSel Interrupt type select
* - \ref UART_INTEN_TOCNTEN_Msk : Rx Time Out interrupt
* - \ref UART_INTEN_WKCTSIEN_Msk : Wakeup interrupt
* - \ref UART_INTEN_BUFERRIEN_Msk : Buffer Error interrupt
* - \ref UART_INTEN_RXTOIEN_Msk : Rx time-out interrupt
* - \ref UART_INTEN_MODEMIEN_Msk : Modem interrupt
* - \ref UART_INTEN_RLSIEN_Msk : Rx Line status interrupt
* - \ref UART_INTEN_THREIEN_Msk : Tx empty interrupt
* - \ref UART_INTEN_RDAIEN_Msk : Rx ready interrupt
*
* @return None
* \hideinitializer
*/
#define UART_ENABLE_INT(uart, u32eIntSel) (uart->INTEN |= (u32eIntSel))
/**
* @brief Disable specified interrupt
*
* @param[in] uart The base address of UART module
* @param[in] u32eIntSel Interrupt type select
* - \ref UART_INTEN_TOCNTEN_Msk : Rx Time Out interrupt
* - \ref UART_INTEN_WKCTSIEN_Msk : Wakeup interrupt
* - \ref UART_INTEN_BUFERRIEN_Msk : Buffer Error interrupt
* - \ref UART_INTEN_RXTOIEN_Msk : Rx time-out interrupt
* - \ref UART_INTEN_MODEMIEN_Msk : Modem interrupt
* - \ref UART_INTEN_RLSIEN_Msk : Rx Line status interrupt
* - \ref UART_INTEN_THREIEN_Msk : Tx empty interrupt
* - \ref UART_INTEN_RDAIEN_Msk : Rx ready interrupt
* @return None
* \hideinitializer
*/
#define UART_DISABLE_INT(uart, u32eIntSel) (uart->INTEN &= ~ (u32eIntSel))
/**
* @brief Get specified interrupt flag/status
*
* @param[in] uart The base address of UART module
* @param[in] u32eIntTypeFlag Interrupt type select
* - \ref UART_INTSTS_HWBUFEINT_Msk : In DMA Mode, Buffer Error Interrupt Indicator.
* - \ref UART_INTSTS_HWTOINT_Msk : In DMA Mode, Time-out Interrupt Indicator.
* - \ref UART_INTSTS_HWMODINT_Msk : In DMA Mode, MODEM Status Interrupt Indicator.
* - \ref UART_INTSTS_HWRLSINT_Msk : In DMA Mode, Receive Line Status Interrupt Indicator.
* - \ref UART_INTSTS_HWBUFEIF_Msk : In DMA Mode, Buffer Error Interrupt Flag.
* - \ref UART_INTSTS_HWTOIF_Msk : In DMA Mode, Time-out Interrupt Flag.
* - \ref UART_INTSTS_HWMODIF_Msk : In DMA Mode, MODEM Interrupt Flag.
* - \ref UART_INTSTS_HWRLSIF_Msk : In DMA Mode, Receive Line Status Flag.
* - \ref UART_INTSTS_LININT_Msk : LIN Bus Interrupt Indicator.
* - \ref UART_INTSTS_BUFERRINT_Msk : Buffer Error Interrupt Indicator.
* - \ref UART_INTSTS_RXTOINT_Msk : Time-out Interrupt Indicator.
* - \ref UART_INTSTS_MODEMINT_Msk : Modem Status Interrupt Indicator.
* - \ref UART_INTSTS_RLSINT_Msk : Receive Line Status Interrupt Indicator.
* - \ref UART_INTSTS_THREINT_Msk : Transmit Holding Register Empty Interrupt Indicator.
* - \ref UART_INTSTS_RDAINT_Msk : Receive Data Available Interrupt Indicator.
* - \ref UART_INTSTS_LINIF_Msk : LIN Bus Flag.
* - \ref UART_INTSTS_BUFERRIF_Msk : Buffer Error Interrupt Flag
* - \ref UART_INTSTS_RXTOIF_Msk : Rx time-out interrupt Flag
* - \ref UART_INTSTS_MODEMIF_Msk : Modem interrupt Flag
* - \ref UART_INTSTS_RLSIF_Msk : Rx Line status interrupt Flag
* - \ref UART_INTSTS_THREIF_Msk : Tx empty interrupt Flag
* - \ref UART_INTSTS_RDAIF_Msk : Rx ready interrupt Flag
*
* @return
* 0 = The specified interrupt is not happened.
* 1 = The specified interrupt is happened.
* \hideinitializer
*/
#define UART_GET_INT_FLAG(uart,u32eIntTypeFlag) ((uart->INTSTS & (u32eIntTypeFlag))?1:0)
/**
* @brief Set RTS pin is low
*
* @param[in] uart The base address of UART module
* @return None
*/
__STATIC_INLINE void UART_CLEAR_RTS(UART_T* uart)
{
uart->MODEM |= UART_MODEM_RTSACTLV_Msk;
uart->MODEM &= UART_MODEM_RTS_Msk;
}
/**
* @brief Set RTS pin is high
*
* @param[in] uart The base address of UART module
* @return None
*/
__STATIC_INLINE void UART_SET_RTS(UART_T* uart)
{
uart->MODEM |= UART_MODEM_RTSACTLV_Msk | UART_MODEM_RTS_Msk;
}
/**
* @brief Clear RS-485 Address Byte Detection Flag
*
* @param[in] uart The base address of UART module
* @return None
* \hideinitializer
*/
#define UART_RS485_CLEAR_ADDR_FLAG(uart) (uart->FIFOSTS |= UART_FIFOSTS_ADDRDETF_Msk)
/**
* @brief Get RS-485 Address Byte Detection Flag
*
* @param[in] uart The base address of UART module
* @return RS-485 Address Byte Detection Flag
* \hideinitializer
*/
#define UART_RS485_GET_ADDR_FLAG(uart) ((uart->FIFOSTS & UART_FIFOSTS_ADDRDETF_Msk) >> UART_FIFOSTS_ADDRDETF_Pos)
void UART_ClearIntFlag(UART_T* uart , uint32_t u32InterruptFlag);
void UART_Close(UART_T* uart );
void UART_DisableFlowCtrl(UART_T* uart );
void UART_DisableInt(UART_T* uart, uint32_t u32InterruptFlag );
void UART_EnableFlowCtrl(UART_T* uart );
void UART_EnableInt(UART_T* uart, uint32_t u32InterruptFlag );
void UART_Open(UART_T* uart, uint32_t u32baudrate);
uint32_t UART_Read(UART_T* uart, uint8_t *pu8RxBuf, uint32_t u32ReadBytes);
void UART_SetLine_Config(UART_T* uart, uint32_t u32baudrate, uint32_t u32data_width, uint32_t u32parity, uint32_t u32stop_bits);
void UART_SetTimeoutCnt(UART_T* uart, uint32_t u32TOC);
void UART_SelectIrDAMode(UART_T* uart, uint32_t u32Buadrate, uint32_t u32Direction);
void UART_SelectRS485Mode(UART_T* uart, uint32_t u32Mode, uint32_t u32Addr);
uint32_t UART_Write(UART_T* uart,uint8_t *pu8TxBuf, uint32_t u32WriteBytes);
/*@}*/ /* end of group NUC472_442_UART_EXPORTED_FUNCTIONS */
/*@}*/ /* end of group NUC472_442_UART_Driver */
/*@}*/ /* end of group NUC472_442_Device_Driver */
#ifdef __cplusplus
}
#endif
#endif //__UART_H__
/*** (C) COPYRIGHT 2013 Nuvoton Technology Corp. ***/
View Git Blame Copy Permalink