261 lines
9.1 KiB
C
261 lines
9.1 KiB
C
/**************************************************************************//**
|
|
* @file sc.h
|
|
* @version V1.00
|
|
* $Revision: 9 $
|
|
* $Date: 15/03/13 4:23p $
|
|
* @brief NUC472/NUC442 Smartcard UART mode (SCUART) driver header file
|
|
*
|
|
* @note
|
|
* Copyright (C) 2014 Nuvoton Technology Corp. All rights reserved.
|
|
*****************************************************************************/
|
|
#ifndef __SCUART_H__
|
|
#define __SCUART_H__
|
|
|
|
#ifdef __cplusplus
|
|
extern "C"
|
|
{
|
|
#endif
|
|
|
|
|
|
/** @addtogroup NUC472_442_Device_Driver NUC472/NUC442 Device Driver
|
|
@{
|
|
*/
|
|
|
|
/** @addtogroup NUC472_442_SCUART_Driver SCUART Driver
|
|
@{
|
|
*/
|
|
|
|
/** @addtogroup NUC472_442_SCUART_EXPORTED_CONSTANTS SCUART Exported Constants
|
|
@{
|
|
*/
|
|
#define SCUART_CHAR_LEN_5 (0x3ul << SC_UARTCTL_WLS_Pos) /*!< Set SCUART word length to 5 bits \hideinitializer */
|
|
#define SCUART_CHAR_LEN_6 (0x2ul << SC_UARTCTL_WLS_Pos) /*!< Set SCUART word length to 6 bits \hideinitializer */
|
|
#define SCUART_CHAR_LEN_7 (0x1ul << SC_UARTCTL_WLS_Pos) /*!< Set SCUART word length to 7 bits \hideinitializer */
|
|
#define SCUART_CHAR_LEN_8 (0) /*!< Set SCUART word length to 8 bits \hideinitializer */
|
|
|
|
#define SCUART_PARITY_NONE (SC_UARTCTL_PBOFF_Msk) /*!< Set SCUART transfer with no parity \hideinitializer */
|
|
#define SCUART_PARITY_ODD (SC_UARTCTL_OPE_Msk) /*!< Set SCUART transfer with odd parity \hideinitializer */
|
|
#define SCUART_PARITY_EVEN (0) /*!< Set SCUART transfer with even parity \hideinitializer */
|
|
|
|
#define SCUART_STOP_BIT_1 (SC_CTL_NSB_Msk) /*!< Set SCUART transfer with one stop bit \hideinitializer */
|
|
#define SCUART_STOP_BIT_2 (0) /*!< Set SCUART transfer with two stop bits \hideinitializer */
|
|
|
|
|
|
/*@}*/ /* end of group NUC472_442_SCUART_EXPORTED_CONSTANTS */
|
|
|
|
|
|
/** @addtogroup NUC472_442_SCUART_EXPORTED_FUNCTIONS SCUART Exported Functions
|
|
@{
|
|
*/
|
|
|
|
/* TX Macros */
|
|
/**
|
|
* @brief Write Data to Tx data register
|
|
* @param[in] sc The base address of smartcard module.
|
|
* @param[in] u8Data Data byte to transmit
|
|
* @return None
|
|
* \hideinitializer
|
|
*/
|
|
#define SCUART_WRITE(sc, u8Data) ((sc)->DAT = (u8Data))
|
|
|
|
/**
|
|
* @brief Get TX FIFO empty flag status from register
|
|
* @param[in] sc The base address of smartcard module
|
|
* @return Transmit FIFO empty status
|
|
* @retval 0 Transmit FIFO is not empty
|
|
* @retval SC_STATUS_TXEMPTY_Msk Transmit FIFO is empty
|
|
* \hideinitializer
|
|
*/
|
|
#define SCUART_GET_TX_EMPTY(sc) ((sc)->STATUS & SC_STATUS_TXEMPTY_Msk)
|
|
|
|
/**
|
|
* @brief Get TX FIFO full flag status from register
|
|
* @param[in] sc The base address of smartcard module
|
|
* @return Transmit FIFO full status
|
|
* @retval 0 Transmit FIFO is not full
|
|
* @retval SC_STATUS_TXFULL_Msk Transmit FIFO is full
|
|
* \hideinitializer
|
|
*/
|
|
#define SCUART_GET_TX_FULL(sc) ((sc)->STATUS & SC_STATUS_TXFULL_Msk)
|
|
|
|
/**
|
|
* @brief Wait specified smartcard port transmission complete
|
|
* @param[in] sc The base address of smartcard module
|
|
* @return None
|
|
* @note This Macro blocks until transmit complete.
|
|
* \hideinitializer
|
|
*/
|
|
#define SCUART_WAIT_TX_EMPTY(sc) while((sc)->STATUS & SC_STATUS_TXACT_Msk)
|
|
|
|
/**
|
|
* @brief Check specified smartcard port transmit FIFO is full or not
|
|
* @param[in] sc The base address of smartcard module
|
|
* @return Transmit FIFO full status
|
|
* @retval 0 Transmit FIFO is not full
|
|
* @retval 1 Transmit FIFO is full
|
|
* \hideinitializer
|
|
*/
|
|
#define SCUART_IS_TX_FULL(sc) ((sc)->STATUS & SC_STATUS_TXFULL_Msk ? 1 : 0)
|
|
|
|
/**
|
|
* @brief Check specified smartcard port transmission is over
|
|
* @param[in] sc The base address of smartcard module
|
|
* @return Transmit complete status
|
|
* @retval 0 Transmit is not complete
|
|
* @retval 1 Transmit complete
|
|
* \hideinitializer
|
|
*/
|
|
#define SCUART_IS_TX_EMPTY(sc) ((sc)->STATUS & SC_STATUS_TXACT_Msk ? 0 : 1)
|
|
|
|
|
|
/* RX Macros */
|
|
|
|
/**
|
|
* @brief Read Rx data register
|
|
* @param[in] sc The base address of smartcard module
|
|
* @return The oldest data byte in RX FIFO
|
|
* \hideinitializer
|
|
*/
|
|
#define SCUART_READ(sc) ((sc)->DAT)
|
|
|
|
/**
|
|
* @brief Get RX FIFO empty flag status from register
|
|
* @param[in] sc The base address of smartcard module
|
|
* @return Receive FIFO empty status
|
|
* @retval 0 Receive FIFO is not empty
|
|
* @retval SC_STATUS_RXEMPTY_Msk Receive FIFO is empty
|
|
* \hideinitializer
|
|
*/
|
|
#define SCUART_GET_RX_EMPTY(sc) ((sc)->STATUS & SC_STATUS_RXEMPTY_Msk)
|
|
|
|
|
|
/**
|
|
* @brief Get RX FIFO full flag status from register
|
|
* @param[in] sc The base address of smartcard module
|
|
* @return Receive FIFO full status
|
|
* @retval 0 Receive FIFO is not full
|
|
* @retval SC_STATUS_RXFULLF_Msk Receive FIFO is full
|
|
* \hideinitializer
|
|
*/
|
|
#define SCUART_GET_RX_FULL(sc) ((sc)->STATUS & SC_STATUS_RXFULL_Msk)
|
|
|
|
/**
|
|
* @brief Check if receive data number in FIFO reach FIFO trigger level or not
|
|
* @param[in] sc The base address of smartcard module
|
|
* @return Receive FIFO data status
|
|
* @retval 0 The number of bytes in receive FIFO is less than trigger level
|
|
* @retval 1 The number of bytes in receive FIFO equals or larger than trigger level
|
|
* @note If receive trigger level is \b not 1 byte, this macro return 0 does not necessary indicates there is \b no data in FIFO
|
|
* \hideinitializer
|
|
*/
|
|
#define SCUART_IS_RX_READY(sc) ((sc)->INTSTS & SC_INTSTS_RDAIF_Msk ? 1 : 0)
|
|
|
|
/**
|
|
* @brief Check specified smartcard port receive FIFO is full or not
|
|
* @param[in] sc The base address of smartcard module
|
|
* @return Receive FIFO full status
|
|
* @retval 0 Receive FIFO is not full
|
|
* @retval 1 Receive FIFO is full
|
|
* \hideinitializer
|
|
*/
|
|
#define SCUART_IS_RX_FULL(sc) ((sc)->STATUS & SC_STATUS_RXFULL_Msk ? 1 : 0)
|
|
|
|
/* Interrupt Macros */
|
|
|
|
/**
|
|
* @brief Enable specified interrupts
|
|
* @param[in] sc The base address of smartcard module
|
|
* @param[in] u32Mask Interrupt masks to enable, a combination of following bits
|
|
* - \ref SC_INTEN_RXTOIF_Msk
|
|
* - \ref SC_INTEN_TERRIEN_Msk
|
|
* - \ref SC_INTEN_TBEIEN_Msk
|
|
* - \ref SC_INTEN_RDAIEN_Msk
|
|
* @return None
|
|
* \hideinitializer
|
|
*/
|
|
#define SCUART_ENABLE_INT(sc, u32Mask) ((sc)->INTEN |= (u32Mask))
|
|
|
|
/**
|
|
* @brief Disable specified interrupts
|
|
* @param[in] sc The base address of smartcard module
|
|
* @param[in] u32Mask Interrupt masks to disable, a combination of following bits
|
|
* - \ref SC_INTEN_RXTOIF_Msk
|
|
* - \ref SC_INTEN_TERRIEN_Msk
|
|
* - \ref SC_INTEN_TBEIEN_Msk
|
|
* - \ref SC_INTEN_RDAIEN_Msk
|
|
* @return None
|
|
* \hideinitializer
|
|
*/
|
|
#define SCUART_DISABLE_INT(sc, u32Mask) ((sc)->INTEN &= ~(u32Mask))
|
|
|
|
/**
|
|
* @brief Get specified interrupt flag/status
|
|
* @param[in] sc The base address of smartcard module
|
|
* @param[in] u32Type Interrupt flag/status to check, could be one of following value
|
|
* - \ref SC_INTSTS_RBTOIF_Msk
|
|
* - \ref SC_INTSTS_TERRIF_Msk
|
|
* - \ref SC_INTSTS_TBEIF_Msk
|
|
* - \ref SC_INTSTS_RDAIF_Msk
|
|
* @return The status of specified interrupt
|
|
* @retval 0 Specified interrupt does not happened
|
|
* @retval 1 Specified interrupt happened
|
|
* \hideinitializer
|
|
*/
|
|
#define SCUART_GET_INT_FLAG(sc, u32Type) ((sc)->INTSTS & u32Type ? 1 : 0)
|
|
|
|
/**
|
|
* @brief Clear specified interrupt flag/status
|
|
* @param[in] sc The base address of smartcard module
|
|
* @param[in] u32Type Interrupt flag/status to clear, could be the combination of following values
|
|
* - \ref SC_INTSTS_RBTOIF_Msk
|
|
* - \ref SC_INTSTS_TERRIF_Msk
|
|
* - \ref SC_INTSTS_TBEIF_Msk
|
|
* @return None
|
|
* \hideinitializer
|
|
*/
|
|
#define SCUART_CLR_INT_FLAG(sc, u32Type) ((sc)->INTSTS = u32Type)
|
|
|
|
/**
|
|
* @brief Get receive error flag/status
|
|
* @param[in] sc The base address of smartcard module
|
|
* @return Current receive error status, could one of following errors:
|
|
* @retval SC_STATUS_PEF_Msk Parity error
|
|
* @retval SC_STATUS_FEF_Msk Frame error
|
|
* @retval SC_STATUS_BEF_Msk Break error
|
|
* \hideinitializer
|
|
*/
|
|
#define SCUART_GET_ERR_FLAG(sc) ((sc)->STATUS & (SC_STATUS_PEF_Msk | SC_STATUS_FEF_Msk | SC_STATUS_BEF_Msk))
|
|
|
|
/**
|
|
* @brief Clear specified receive error flag/status
|
|
* @param[in] sc The base address of smartcard module
|
|
* @param[in] u32Mask Receive error flag/status to clear, combination following values
|
|
* - \ref SC_STATUS_PEF_Msk
|
|
* - \ref SC_STATUS_FEF_Msk
|
|
* - \ref SC_STATUS_BEF_Msk
|
|
* @return None
|
|
* \hideinitializer
|
|
*/
|
|
#define SCUART_CLR_ERR_FLAG(sc, u32Mask) ((sc)->STATUS = u32Mask)
|
|
|
|
void SCUART_Close(SC_T* sc);
|
|
uint32_t SCUART_Open(SC_T* sc, uint32_t u32baudrate);
|
|
uint32_t SCUART_Read(SC_T* sc, uint8_t *pu8RxBuf, uint32_t u32ReadBytes);
|
|
uint32_t SCUART_SetLineConfig(SC_T* sc, uint32_t u32Baudrate, uint32_t u32DataWidth, uint32_t u32Parity, uint32_t u32StopBits);
|
|
void SCUART_SetTimeoutCnt(SC_T* sc, uint32_t u32TOC);
|
|
void SCUART_Write(SC_T* sc,uint8_t *pu8TxBuf, uint32_t u32WriteBytes);
|
|
|
|
/*@}*/ /* end of group NUC472_442_SCUART_EXPORTED_FUNCTIONS */
|
|
|
|
/*@}*/ /* end of group NUC472_442_SCUART_Driver */
|
|
|
|
/*@}*/ /* end of group NUC472_442_Device_Driver */
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif //__SCUART_H__
|
|
|
|
/*** (C) COPYRIGHT 2014 Nuvoton Technology Corp. ***/
|