ac2fb2beab | ||
---|---|---|
.. | ||
applications | ||
board | ||
figures | ||
.config | ||
.gitignore | ||
Kconfig | ||
README.md | ||
README_zh.md | ||
SConscript | ||
SConstruct | ||
project.ewp | ||
project.eww | ||
project.uvoptx | ||
project.uvproj | ||
project.uvprojx | ||
rtconfig.h | ||
rtconfig.py | ||
template.ewd | ||
template.ewp | ||
template.eww | ||
template.uvoptx | ||
template.uvproj | ||
template.uvprojx |
README.md
STM32F072-Nucleo BSP Introduction
MCU: STM32F072RB @48MHz, 128KB FLASH, 16KB RAM
The STM32F072x8/xB microcontrollers incorporate the high-performance ARM®Cortex®-M0 32-bit RISC core operating at up to 48 MHz frequency, high-speed embedded memories (up to 128 Kbytes of Flash memory and 16 Kbytes of SRAM), and an extensive range of enhanced peripherals and I/Os. All devices offer standard communication interfaces (two I2Cs, two SPI/I2S, one HDMI CEC and four USARTs), one USB Full-speed device (crystal-less), one CAN, one 12-bit ADC, one 12-bit DAC with two channels, seven 16-bit timers, one 32-bit timer and an advanced-control PWM timer.
The STM32F072x8/xB microcontrollers operate in the -40 to +85 °C and -40 to +105 °C temperature ranges, from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving modes allows the design of low-power applications. The STM32F072x8/xB microcontrollers include devices in seven different packages ranging from 48 pins to 100 pins with a die form also available upon request. Depending on the device chosen, different sets of peripherals are included. These features make the STM32F072x8/xB microcontrollers suitable for a wide range of applications such as application control and user interfaces, hand-held equipment, A/V receivers and digital TV, PC peripherals, gaming and GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems, video intercoms and HVACs.
KEY FEATURES
-
Core: ARM®32-bit Cortex®-M0 CPU, frequency up to 48 MHz
-
Memories
- 64 to 128 Kbytes of Flash memory
- 16 Kbytes of SRAM with HW parity
-
CRC calculation unit
-
Reset and power management
- Digital and I/O supply: VDD= 2.0 V to 3.6 V
- Analog supply: VDDA= VDDto 3.6 V
- Selected I/Os: VDDIO2= 1.65 V to 3.6 V
- Power-on/Power down reset (POR/PDR)
- Programmable voltage detector (PVD)
- Low power modes: Sleep, Stop, Standby
- VBATsupply for RTC and backup registers
-
Clock management
- 4 to 32 MHz crystal oscillator
- 32 kHz oscillator for RTC with calibration
- Internal 8 MHz RC with x6 PLL option
- Internal 40 kHz RC oscillator
- Internal 48 MHz oscillator with automatic trimming based on ext. synchronization
-
Up to 87 fast I/Os
- All mappable on external interrupt vectors
- Up to 68 I/Os with 5V tolerant capability and 19 with independent supply VDDIO2
-
Seven-channel DMA controller
-
One 12-bit, 1.0 μs ADC (up to 16 channels)
- Conversion range: 0 to 3.6 V
- Separate analog supply: 2.4 V to 3.6 V
-
One 12-bit D/A converter (with 2 channels)
-
Two fast low-power analog comparators with programmable input and output
-
Up to 24 capacitive sensing channels for touchkey, linear and rotary touch sensors
-
Calendar RTC with alarm and periodic wakeup from Stop/Standby
-
12 timers
- One 16-bit advanced-control timer for six-channel PWM output
- One 32-bit and seven 16-bit timers, with up to four IC/OC, OCN, usable for IR control decoding or DAC control
- Independent and system watchdog timers
- SysTick timer
-
Communication interfaces
- Two I2C interfaces supporting Fast Mode Plus (1 Mbit/s) with 20 mA current sink, one supporting SMBus/PMBus and wakeup
- Four USARTs supporting master synchronous SPI and modem control, two with ISO7816 interface, LIN, IrDA, auto baud rate detection and wakeup feature
- Two SPIs (18 Mbit/s) with 4 to 16 programmable bit frames, and with I2S interface multiplexed
- CAN interface
- USB 2.0 full-speed interface, able to run from internal 48 MHz oscillator and with BCD and LPM support
-
HDMI CEC wakeup on header reception
-
Serial wire debug (SWD)
-
96-bit unique ID
-
All packages ECOPACK®2
Read more
Documents | Description |
---|---|
STM32_Nucleo-64_BSP_Introduction | How to run RT-Thread on STM32 Nucleo-64 boards (Must-Read) |
STM32F072RB ST Official Website | STM32F072RB datasheet and other resources |
Maintained By
Translated By
Meco Man @ RT-Thread Community