108 lines
4.6 KiB
Markdown
108 lines
4.6 KiB
Markdown
# ESP32-C3 BSP Introduction
|
||
|
||
[中文](README_ZH.md) | English
|
||
|
||
This document records the execution instruction of the BSP (board support package) for the [ESP32-C3](http://luatos.com/t/esp32c3) development board.
|
||
|
||
The document is covered in two parts:
|
||
|
||
- Board Resources Introduction
|
||
- Quickly Get Started
|
||
|
||
## Resources Introduction
|
||
|
||
We tested 2 development boards, it all works, but due to the different LED pins of the two development boards, so we'll need to select the corresponding development board in the menuconfig.
|
||
|
||
- [LUATOS_ESP32C3](https://wiki.luatos.com/chips/esp32c3/board.html)
|
||
|
||
|
||
|
||
- [HX-DK-商](https://docs.wireless-tech.cn/doc/7/)
|
||
|
||
|
||
|
||
The mainly-used resources of LUATOS_ESP32C3 are shown as follows:
|
||
|
||
- MCU: [esp32-c3](https://www.espressif.com/sites/default/files/documentation/esp32-c3_datasheet_en.pdf)，Main Frequency 160MHz, 407.22 CoreMark; 2.55 CoreMark/MHz
|
||
- Built-in Chip: 384KB ROM, 400KB SRAM
|
||
- Peripherals
|
||
- Red LED: 2, LED: D4 (IO12), D5（IO13）
|
||
- Button: 2, K1（BOOT） K2(RST)
|
||
- SPI FLASH: 4M
|
||
- Common-used interfaces: USB, UART, etc.
|
||
|
||
### For more details about this board, please refer to [Here](https://wiki.luatos.com/chips/esp32c3/board.html).
|
||
|
||
## **Peripheral Condition**
|
||
|
||
Each peripheral supporting condition for this BSP is as follows:
|
||
|
||
| **On-board Peripherals** | ****Support**** | ****Remark**** |
|
||
| ------------------------ | --------------- | ------------------------------------------------------------ |
|
||
| GPIO | Support | |
|
||
| UART | Support | Using LUATOS_ESP32C3 development board requires connecting serial port to USB chip UART0_TX and UART0_RX (such as CP2102) |
|
||
| JTAG debug | Support | ESP32C3 usb-linked development boards can be debugged |
|
||
|
||
## Install ESP-IDF
|
||
ESP-IDF can be installed in two ways
|
||
1. Use Env tool
|
||
- Download the package
|
||
```
|
||
pkgs --update
|
||
```
|
||
- Go to ESP-IDF package directory and install IDF tools. This command only needs to be run once after the package is downloaded for the first time.
|
||
```
|
||
cd packages/ESP-IDF-latest
|
||
./install.sh
|
||
# Use install.bat in Windows environment
|
||
```
|
||
- Under the ESP-IDF package directory, export IDF environment variables. This commands need to be run every time when the BSP is built in a new terminal.
|
||
```
|
||
. export.sh
|
||
# Use export.bat in Windows environment
|
||
```
|
||
2. Apply patch to a local installation of ESP-IDF
|
||
- Select the below option with `SCons --menuconfig`
|
||
```
|
||
Hardware Drivers Config
|
||
[*] Use local ESP-IDF installation
|
||
```
|
||
And deselect ESP-IDF package
|
||
```
|
||
RT-Thread online packages
|
||
peripheral libraries and drivers
|
||
[ ] ESP-IDF: Espressif IoT Development Framework
|
||
```
|
||
- Any convenient method to install ESP-IDF can be used, such as [VSCode plugin](https://github.com/espressif/vscode-esp-idf-extension/blob/master/docs/tutorial/install.md). Make sure to install the master version of ESP-IDF.
|
||
- Enter the local ESP-IDF directory and run the following commands
|
||
```
|
||
git checkout 5c1044d84d625219eafa18c24758d9f0e4006b2c
|
||
# Replace rtt.patch with the actual directory of rtt.patch under the BSP directory
|
||
git am rtt.patch
|
||
```
|
||
- After applying the patch, ESP-IDF FreeRTOS projects can be compiled as usual
|
||
## Compile and Upload
|
||
- Configure RT-Thread under the BSP directory
|
||
```
|
||
scons --menuconfig
|
||
```
|
||
- Whenever RT-Thread configuration is changed with `scons --menuconfig`, a new `CMakeLists.txt` needs to be generated with the command below
|
||
```
|
||
scons --target=esp-idf
|
||
```
|
||
- If ESP-IDf is installed using Env, use `idf.py` to compile and upload the program. Refer to [Espressif official documents](https://docs.espressif.com/projects/esp-idf/en/latest/esp32c3/get-started/index.html#build-your-first-project) for reference. Otherwise follow the appropriate steps depending on how ESP-IDF was installed, such as using [VSCode plugin](https://github.com/espressif/vscode-esp-idf-extension/blob/master/docs/tutorial/install.md).
|
||
- Once the project is successfully downloaded, the system runs automatically, the red LED will blink in 1s on cycles.
|
||
|
||
## Notes
|
||
|
||
- The basic functions are now supported, but it needs more, welcome any contributions and feedback.
|
||
|
||
|
||
Maintainer:
|
||
|
||
- [supperthomas](https://github.com/supperthomas) email address: [78900636@qq.com](mailto:78900636@qq.com)
|
||
- [tangzz98](https://github.com/tangzz98) email address: [tangz98@outlook.com](tangz98@outlook.com)
|
||
|
||
Special thanks to [chenyingchun0312](https://github.com/chenyingchun0312) for providing support on the RISC-V part working.
|
||
|