rt-thread/bsp/imxrt1052-evk/Libraries/drivers/fsl_flexspi.h

837 lines
36 KiB
C

/*
* Copyright (c) 2016, Freescale Semiconductor, Inc.
* Copyright 2016-2017 NXP
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* o Redistributions of source code must retain the above copyright notice, this list
* of conditions and the following disclaimer.
*
* o Redistributions in binary form must reproduce the above copyright notice, this
* list of conditions and the following disclaimer in the documentation and/or
* other materials provided with the distribution.
*
* o Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef __FSL_FLEXSPI_H_
#define __FSL_FLEXSPI_H_
#include <stddef.h>
#include "fsl_device_registers.h"
#include "fsl_common.h"
/*!
* @addtogroup flexspi
* @{
*/
/*******************************************************************************
* Definitions
******************************************************************************/
/*! @name Driver version */
/*@{*/
/*! @brief FLEXSPI driver version 2.0.1. */
#define FSL_FLEXSPI_DRIVER_VERSION (MAKE_VERSION(2, 0, 1))
/*@}*/
#define FSL_FEATURE_FLEXSPI_AHB_BUFFER_COUNT FSL_FEATURE_FLEXSPI_AHB_BUFFER_COUNTn(0)
/*! @breif Formula to form FLEXSPI instructions in LUT table. */
#define FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) \
(FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | \
FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1))
/*! @brief Status structure of FLEXSPI.*/
enum _flexspi_status
{
kStatus_FLEXSPI_Busy = MAKE_STATUS(kStatusGroup_FLEXSPI, 0), /*!< FLEXSPI is busy */
kStatus_FLEXSPI_SequenceExecutionTimeout = MAKE_STATUS(kStatusGroup_FLEXSPI, 1), /*!< Sequence execution timeout
error occurred during FLEXSPI transfer. */
kStatus_FLEXSPI_IpCommandSequenceError = MAKE_STATUS(kStatusGroup_FLEXSPI, 2), /*!< IP command Sequence execution
timeout error occurred during FLEXSPI transfer. */
kStatus_FLEXSPI_IpCommandGrantTimeout = MAKE_STATUS(kStatusGroup_FLEXSPI, 3), /*!< IP command grant timeout error
occurred during FLEXSPI transfer. */
};
/*! @brief CMD definition of FLEXSPI, use to form LUT instruction. */
enum _flexspi_command
{
kFLEXSPI_Command_STOP = 0x00U, /*!< Stop execution, deassert CS. */
kFLEXSPI_Command_SDR = 0x01U, /*!< Transmit Command code to Flash, using SDR mode. */
kFLEXSPI_Command_RADDR_SDR = 0x02U, /*!< Transmit Row Address to Flash, using SDR mode. */
kFLEXSPI_Command_CADDR_SDR = 0x03U, /*!< Transmit Column Address to Flash, using SDR mode. */
kFLEXSPI_Command_MODE1_SDR = 0x04U, /*!< Transmit 1-bit Mode bits to Flash, using SDR mode. */
kFLEXSPI_Command_MODE2_SDR = 0x05U, /*!< Transmit 2-bit Mode bits to Flash, using SDR mode. */
kFLEXSPI_Command_MODE4_SDR = 0x06U, /*!< Transmit 4-bit Mode bits to Flash, using SDR mode. */
kFLEXSPI_Command_MODE8_SDR = 0x07U, /*!< Transmit 8-bit Mode bits to Flash, using SDR mode. */
kFLEXSPI_Command_WRITE_SDR = 0x08U, /*!< Transmit Programming Data to Flash, using SDR mode. */
kFLEXSPI_Command_READ_SDR = 0x09U, /*!< Receive Read Data from Flash, using SDR mode. */
kFLEXSPI_Command_LEARN_SDR = 0x0AU, /*!< Receive Read Data or Preamble bit from Flash, SDR mode. */
kFLEXSPI_Command_DATSZ_SDR = 0x0BU, /*!< Transmit Read/Program Data size (byte) to Flash, SDR mode. */
kFLEXSPI_Command_DUMMY_SDR = 0x0CU, /*!< Leave data lines undriven by FlexSPI controller.*/
kFLEXSPI_Command_DUMMY_RWDS_SDR = 0x0DU, /*!< Leave data lines undriven by FlexSPI controller,
dummy cycles decided by RWDS. */
kFLEXSPI_Command_DDR = 0x21U, /*!< Transmit Command code to Flash, using DDR mode. */
kFLEXSPI_Command_RADDR_DDR = 0x22U, /*!< Transmit Row Address to Flash, using DDR mode. */
kFLEXSPI_Command_CADDR_DDR = 0x23U, /*!< Transmit Column Address to Flash, using DDR mode. */
kFLEXSPI_Command_MODE1_DDR = 0x24U, /*!< Transmit 1-bit Mode bits to Flash, using DDR mode. */
kFLEXSPI_Command_MODE2_DDR = 0x25U, /*!< Transmit 2-bit Mode bits to Flash, using DDR mode. */
kFLEXSPI_Command_MODE4_DDR = 0x26U, /*!< Transmit 4-bit Mode bits to Flash, using DDR mode. */
kFLEXSPI_Command_MODE8_DDR = 0x27U, /*!< Transmit 8-bit Mode bits to Flash, using DDR mode. */
kFLEXSPI_Command_WRITE_DDR = 0x28U, /*!< Transmit Programming Data to Flash, using DDR mode. */
kFLEXSPI_Command_READ_DDR = 0x29U, /*!< Receive Read Data from Flash, using DDR mode. */
kFLEXSPI_Command_LEARN_DDR = 0x2AU, /*!< Receive Read Data or Preamble bit from Flash, DDR mode. */
kFLEXSPI_Command_DATSZ_DDR = 0x2BU, /*!< Transmit Read/Program Data size (byte) to Flash, DDR mode. */
kFLEXSPI_Command_DUMMY_DDR = 0x2CU, /*!< Leave data lines undriven by FlexSPI controller.*/
kFLEXSPI_Command_DUMMY_RWDS_DDR = 0x2DU, /*!< Leave data lines undriven by FlexSPI controller,
dummy cycles decided by RWDS. */
kFLEXSPI_Command_JUMP_ON_CS = 0x1FU, /*!< Stop execution, deassert CS and save operand[7:0] as the
instruction start pointer for next sequence */
};
/*! @brief pad definition of FLEXSPI, use to form LUT instruction. */
enum _flexspi_pad
{
kFLEXSPI_1PAD = 0x00U, /*!< Transmit command/address and transmit/receive data only through DATA0/DATA1. */
kFLEXSPI_2PAD = 0x01U, /*!< Transmit command/address and transmit/receive data only through DATA[1:0]. */
kFLEXSPI_4PAD = 0x02U, /*!< Transmit command/address and transmit/receive data only through DATA[3:0]. */
kFLEXSPI_8PAD = 0x03U, /*!< Transmit command/address and transmit/receive data only through DATA[7:0]. */
};
/*! @brief FLEXSPI interrupt status flags.*/
typedef enum _flexspi_flags
{
kFLEXSPI_SequenceExecutionTimeoutFlag = FLEXSPI_INTEN_SEQTIMEOUTEN_MASK, /*!< Sequence execution timeout. */
kFLEXSPI_AhbBusTimeoutFlag = FLEXSPI_INTEN_AHBBUSTIMEOUTEN_MASK, /*!< AHB Bus timeout. */
kFLEXSPI_SckStoppedBecauseTxEmptyFlag =
FLEXSPI_INTEN_SCKSTOPBYWREN_MASK, /*!< SCK is stopped during command
sequence because Async TX FIFO empty. */
kFLEXSPI_SckStoppedBecauseRxFullFlag =
FLEXSPI_INTEN_SCKSTOPBYRDEN_MASK, /*!< SCK is stopped during command
sequence because Async RX FIFO full. */
#if !((defined(FSL_FEATURE_FLEXSPI_HAS_NO_DATA_LEARN)) && (FSL_FEATURE_FLEXSPI_HAS_NO_DATA_LEARN))
kFLEXSPI_DataLearningFailedFlag = FLEXSPI_INTEN_DATALEARNFAILEN_MASK, /*!< Data learning failed. */
#endif
kFLEXSPI_IpTxFifoWatermarkEmpltyFlag = FLEXSPI_INTEN_IPTXWEEN_MASK, /*!< IP TX FIFO WaterMark empty. */
kFLEXSPI_IpRxFifoWatermarkAvailableFlag = FLEXSPI_INTEN_IPRXWAEN_MASK, /*!< IP RX FIFO WaterMark available. */
kFLEXSPI_AhbCommandSequenceErrorFlag =
FLEXSPI_INTEN_AHBCMDERREN_MASK, /*!< AHB triggered Command Sequences Error. */
kFLEXSPI_IpCommandSequenceErrorFlag = FLEXSPI_INTEN_IPCMDERREN_MASK, /*!< IP triggered Command Sequences Error. */
kFLEXSPI_AhbCommandGrantTimeoutFlag =
FLEXSPI_INTEN_AHBCMDGEEN_MASK, /*!< AHB triggered Command Sequences Grant Timeout. */
kFLEXSPI_IpCommandGrantTimeoutFlag =
FLEXSPI_INTEN_IPCMDGEEN_MASK, /*!< IP triggered Command Sequences Grant Timeout. */
kFLEXSPI_IpCommandExcutionDoneFlag =
FLEXSPI_INTEN_IPCMDDONEEN_MASK, /*!< IP triggered Command Sequences Execution finished. */
kFLEXSPI_AllInterruptFlags = 0xFFFU, /*!< All flags. */
} flexspi_flags_t;
/*! @brief FLEXSPI sample clock source selection for Flash Reading.*/
typedef enum _flexspi_read_sample_clock
{
kFLEXSPI_ReadSampleClkLoopbackInternally = 0x0U, /*!< Dummy Read strobe generated by FlexSPI Controller
and loopback internally. */
kFLEXSPI_ReadSampleClkLoopbackFromDqsPad = 0x1U, /*!< Dummy Read strobe generated by FlexSPI Controller
and loopback from DQS pad. */
kFLEXSPI_ReadSampleClkLoopbackFromSckPad = 0x2U, /*!< SCK output clock and loopback from SCK pad. */
kFLEXSPI_ReadSampleClkExternalInputFromDqsPad = 0x3U, /*!< Flash provided Read strobe and input from DQS pad. */
} flexspi_read_sample_clock_t;
/*! @brief FLEXSPI interval unit for flash device select.*/
typedef enum _flexspi_cs_interval_cycle_unit
{
kFLEXSPI_CsIntervalUnit1SckCycle = 0x0U, /*!< Chip selection interval: CSINTERVAL * 1 serial clock cycle. */
kFLEXSPI_CsIntervalUnit256SckCycle = 0x1U, /*!< Chip selection interval: CSINTERVAL * 256 serial clock cycle. */
} flexspi_cs_interval_cycle_unit_t;
/*! @brief FLEXSPI AHB wait interval unit for writting.*/
typedef enum _flexspi_ahb_write_wait_unit
{
kFLEXSPI_AhbWriteWaitUnit2AhbCycle = 0x0U, /*!< AWRWAIT unit is 2 ahb clock cycle. */
kFLEXSPI_AhbWriteWaitUnit8AhbCycle = 0x1U, /*!< AWRWAIT unit is 8 ahb clock cycle. */
kFLEXSPI_AhbWriteWaitUnit32AhbCycle = 0x2U, /*!< AWRWAIT unit is 32 ahb clock cycle. */
kFLEXSPI_AhbWriteWaitUnit128AhbCycle = 0x3U, /*!< AWRWAIT unit is 128 ahb clock cycle. */
kFLEXSPI_AhbWriteWaitUnit512AhbCycle = 0x4U, /*!< AWRWAIT unit is 512 ahb clock cycle. */
kFLEXSPI_AhbWriteWaitUnit2048AhbCycle = 0x5U, /*!< AWRWAIT unit is 2048 ahb clock cycle. */
kFLEXSPI_AhbWriteWaitUnit8192AhbCycle = 0x6U, /*!< AWRWAIT unit is 8192 ahb clock cycle. */
kFLEXSPI_AhbWriteWaitUnit32768AhbCycle = 0x7U, /*!< AWRWAIT unit is 32768 ahb clock cycle. */
} flexspi_ahb_write_wait_unit_t;
/*! @brief Error Code when IP command Error detected.*/
typedef enum _flexspi_ip_error_code
{
kFLEXSPI_IpCmdErrorNoError = 0x0U, /*!< No error. */
kFLEXSPI_IpCmdErrorJumpOnCsInIpCmd = 0x2U, /*!< IP command with JMP_ON_CS instruction used. */
kFLEXSPI_IpCmdErrorUnknownOpCode = 0x3U, /*!< Unknown instruction opcode in the sequence. */
kFLEXSPI_IpCmdErrorSdrDummyInDdrSequence = 0x4U, /*!< Instruction DUMMY_SDR/DUMMY_RWDS_SDR
used in DDR sequence. */
kFLEXSPI_IpCmdErrorDdrDummyInSdrSequence = 0x5U, /*!< Instruction DUMMY_DDR/DUMMY_RWDS_DDR
used in SDR sequence. */
kFLEXSPI_IpCmdErrorInvalidAddress = 0x6U, /*!< Flash access start address exceed the whole
flash address range (A1/A2/B1/B2). */
kFLEXSPI_IpCmdErrorSequenceExecutionTimeout = 0xEU, /*!< Sequence execution timeout. */
kFLEXSPI_IpCmdErrorFlashBoundaryAcrosss = 0xFU, /*!< Flash boundary crossed. */
} flexspi_ip_error_code_t;
/*! @brief Error Code when AHB command Error detected.*/
typedef enum _flexspi_ahb_error_code
{
kFLEXSPI_AhbCmdErrorNoError = 0x0U, /*!< No error. */
kFLEXSPI_AhbCmdErrorJumpOnCsInWriteCmd = 0x2U, /*!< AHB Write command with JMP_ON_CS instruction
used in the sequence. */
kFLEXSPI_AhbCmdErrorUnknownOpCode = 0x3U, /*!< Unknown instruction opcode in the sequence. */
kFLEXSPI_AhbCmdErrorSdrDummyInDdrSequence = 0x4U, /*!< Instruction DUMMY_SDR/DUMMY_RWDS_SDR used
in DDR sequence. */
kFLEXSPI_AhbCmdErrorDdrDummyInSdrSequence = 0x5U, /*!< Instruction DUMMY_DDR/DUMMY_RWDS_DDR
used in SDR sequence. */
kFLEXSPI_AhbCmdSequenceExecutionTimeout = 0x6U, /*!< Sequence execution timeout. */
} flexspi_ahb_error_code_t;
/*! @brief FLEXSPI operation port select.*/
typedef enum _flexspi_port
{
kFLEXSPI_PortA1 = 0x0U, /*!< Access flash on A1 port. */
kFLEXSPI_PortA2 = 0x1U, /*!< Access flash on A2 port. */
kFLEXSPI_PortB1 = 0x2U, /*!< Access flash on B1 port. */
kFLEXSPI_PortB2 = 0x3U, /*!< Access flash on B2 port. */
} flexspi_port_t;
/*! @brief Trigger source of current command sequence granted by arbitrator.*/
typedef enum _flexspi_arb_command_source
{
kFLEXSPI_AhbReadCommand = 0x0U,
kFLEXSPI_AhbWriteCommand = 0x1U,
kFLEXSPI_IpCommand = 0x2U,
kFLEXSPI_SuspendedCommand = 0x3U,
} flexspi_arb_command_source_t;
typedef enum _flexspi_command_type
{
kFLEXSPI_Command, /*!< FlexSPI operation: Only command, both TX and Rx buffer are ignored. */
kFLEXSPI_Config, /*!< FlexSPI operation: Configure device mode, the TX fifo size is fixed in LUT. */
kFLEXSPI_Read, /* /!< FlexSPI operation: Read, only Rx Buffer is effective. */
kFLEXSPI_Write, /* /!< FlexSPI operation: Read, only Tx Buffer is effective. */
} flexspi_command_type_t;
typedef struct _flexspi_ahbBuffer_config
{
uint8_t priority;
uint8_t masterIndex;
uint16_t bufferSize;
} flexspi_ahbBuffer_config_t;
/*! @brief FLEXSPI configuration structure. */
typedef struct _flexspi_config
{
flexspi_read_sample_clock_t rxSampleClock; /*!< Sample Clock source selection for Flash Reading. */
bool enableSckFreeRunning; /*!< Enable/disable SCK output free-running. */
bool enableCombination; /*!< Enable/disable combining PORT A and B Data Pins
(SIOA[3:0] and SIOB[3:0]) to support Flash Octal mode. */
bool enableDoze; /*!< Enable/disable doze mode support. */
bool enableHalfSpeedAccess; /*!< Enable/disable divide by 2 of the clock for half
speed commands. */
bool enableSckBDiffOpt; /*!< Enable/disable SCKB pad use as SCKA differential clock
output, when enable, Port B flash access is not available. */
bool enableSameConfigForAll; /*!< Enable/disable same configuration for all connected devices
when enabled, same configuration in FLASHA1CRx is applied to all. */
uint16_t seqTimeoutCycle; /*!< Timeout wait cycle for command sequence execution,
timeout after ahbGrantTimeoutCyle*1024 serial root clock cycles. */
uint8_t ipGrantTimeoutCycle; /*!< Timeout wait cycle for IP command grant, timeout after
ipGrantTimeoutCycle*1024 AHB clock cycles. */
uint8_t txWatermark; /*!< FLEXSPI IP transmit watermark value. */
uint8_t rxWatermark; /*!< FLEXSPI receive watermark value. */
struct
{
bool enableAHBWriteIpTxFifo; /*!< Enable AHB bus write access to IP TX FIFO. */
bool enableAHBWriteIpRxFifo; /*!< Enable AHB bus write access to IP RX FIFO. */
uint8_t ahbGrantTimeoutCycle; /*!< Timeout wait cycle for AHB command grant,
timeout after ahbGrantTimeoutCyle*1024 AHB clock cycles. */
uint16_t ahbBusTimeoutCycle; /*!< Timeout wait cycle for AHB read/write access,
timeout after ahbBusTimeoutCycle*1024 AHB clock cycles. */
uint8_t resumeWaitCycle; /*!< Wait cycle for idle state before suspended command sequence
resume, timeout after ahbBusTimeoutCycle AHB clock cycles. */
flexspi_ahbBuffer_config_t buffer[FSL_FEATURE_FLEXSPI_AHB_BUFFER_COUNT]; /*!< AHB buffer size. */
bool enableClearAHBBufferOpt; /*!< Enable/disable automatically clean AHB RX Buffer and TX Buffer
when FLEXSPI returns STOP mode ACK. */
bool enableAHBPrefetch; /*!< Enable/disable AHB read prefetch feature, when enabled, FLEXSPI
will fetch more data than current AHB burst. */
bool enableAHBBufferable; /*!< Enable/disable AHB bufferable write access support, when enabled,
FLEXSPI return before waiting for command excution finished. */
bool enableAHBCachable; /*!< Enable AHB bus cachable read access support. */
} ahbConfig;
} flexspi_config_t;
/*! @brief External device configuration items. */
typedef struct _flexspi_device_config
{
uint32_t flexspiRootClk; /*!< FLEXSPI serial root clock. */
bool isSck2Enabled; /*!< FLEXSPI use SCK2. */
uint32_t flashSize; /*!< Flash size in KByte. */
flexspi_cs_interval_cycle_unit_t CSIntervalUnit; /*!< CS interval unit, 1 or 256 cycle. */
uint16_t CSInterval; /*!< CS line assert interval, mutiply CS interval unit to
get the CS line assert interval cycles. */
uint8_t CSHoldTime; /*!< CS line hold time. */
uint8_t CSSetupTime; /*!< CS line setup time. */
uint8_t dataValidTime; /*!< Data valid time for external device. */
uint8_t columnspace; /*!< Column space size. */
bool enableWordAddress; /*!< If enable word address.*/
uint8_t AWRSeqIndex; /*!< Sequence ID for AHB write command. */
uint8_t AWRSeqNumber; /*!< Sequence number for AHB write command. */
uint8_t ARDSeqIndex; /*!< Sequence ID for AHB read command. */
uint8_t ARDSeqNumber; /*!< Sequence number for AHB read command. */
flexspi_ahb_write_wait_unit_t AHBWriteWaitUnit; /*!< AHB write wait unit. */
uint16_t AHBWriteWaitInterval; /*!< AHB write wait interval, mutiply AHB write interval
unit to get the AHB write wait cycles. */
bool enableWriteMask; /*!< Enable/Disable FLEXSPI drive DQS pin as write mask
when writing to external device. */
} flexspi_device_config_t;
/*! @brief Transfer structure for FLEXSPI. */
typedef struct _flexspi_transfer
{
uint32_t deviceAddress; /*!< Operation device address. */
flexspi_port_t port; /*!< Operation port. */
flexspi_command_type_t cmdType; /*!< Execution command type. */
uint8_t seqIndex; /*!< Sequence ID for command. */
uint8_t SeqNumber; /*!< Sequence number for command. */
uint32_t *data; /*!< Data buffer. */
size_t dataSize; /*!< Data size in bytes. */
} flexspi_transfer_t;
/* Forward declaration of the handle typedef. */
typedef struct _flexspi_handle flexspi_handle_t;
/*! @brief FLEXSPI transfer callback function. */
typedef void (*flexspi_transfer_callback_t)(FLEXSPI_Type *base,
flexspi_handle_t *handle,
status_t status,
void *userData);
/*! @brief Transfer handle structure for FLEXSPI. */
struct _flexspi_handle
{
uint32_t state; /*!< Internal state for FLEXSPI transfer */
uint32_t *data; /*!< Data buffer. */
size_t dataSize; /*!< Remaining Data size in bytes. */
size_t transferTotalSize; /*!< Total Data size in bytes. */
flexspi_transfer_callback_t completionCallback; /*!< Callback for users while transfer finish or error occurred */
void *userData; /*!< FLEXSPI callback function parameter.*/
};
/*******************************************************************************
* API
******************************************************************************/
#if defined(__cplusplus)
extern "C" {
#endif /*_cplusplus. */
/*!
* @name Initialization and deinitialization
* @{
*/
/*!
* @brief Initializes the FLEXSPI module and internal state.
*
* This function enables the clock for FLEXSPI and also configures the FLEXSPI with the
* input configure parameters. Users should call this function before any FLEXSPI operations.
*
* @param base FLEXSPI peripheral base address.
* @param config FLEXSPI configure structure.
*/
void FLEXSPI_Init(FLEXSPI_Type *base, const flexspi_config_t *config);
/*!
* @brief Gets default settings for FLEXSPI.
*
* @param config FLEXSPI configuration structure.
*/
void FLEXSPI_GetDefaultConfig(flexspi_config_t *config);
/*!
* @brief Deinitializes the FLEXSPI module.
*
* Clears the FLEXSPI state and FLEXSPI module registers.
* @param base FLEXSPI peripheral base address.
*/
void FLEXSPI_Deinit(FLEXSPI_Type *base);
/*!
* @brief Configures the connected device parameter.
*
* This function configures the connected device relevant parameters, such as the size, command, and so on.
* The flash configuration value cannot have a default value. The user needs to configure it according to the
* connected device.
*
* @param base FLEXSPI peripheral base address.
* @param config Flash configuration parameters.
* @param port FLEXSPI Operation port.
*/
void FLEXSPI_SetFlashConfig(FLEXSPI_Type *base, flexspi_device_config_t *config, flexspi_port_t port);
/*!
* @brief Software reset for the FLEXSPI logic.
*
* This function sets the software reset flags for both AHB and buffer domain and
* resets both AHB buffer and also IP FIFOs.
*
* @param base FLEXSPI peripheral base address.
*/
static inline void FLEXSPI_SoftwareReset(FLEXSPI_Type *base)
{
base->MCR0 |= FLEXSPI_MCR0_SWRESET_MASK;
while (base->MCR0 & FLEXSPI_MCR0_SWRESET_MASK)
{
}
}
/*!
* @brief Enables or disables the FLEXSPI module.
*
* @param base FLEXSPI peripheral base address.
* @param enable True means enable FLEXSPI, false means disable.
*/
static inline void FLEXSPI_Enable(FLEXSPI_Type *base, bool enable)
{
if (enable)
{
base->MCR0 &= ~FLEXSPI_MCR0_MDIS_MASK;
}
else
{
base->MCR0 |= FLEXSPI_MCR0_MDIS_MASK;
}
}
/* @} */
/*!
* @name Interrupts
* @{
*/
/*!
* @brief Enables the FLEXSPI interrupts.
*
* @param base FLEXSPI peripheral base address.
* @param mask FLEXSPI interrupt source.
*/
static inline void FLEXSPI_EnableInterrupts(FLEXSPI_Type *base, uint32_t mask)
{
base->INTEN |= mask;
}
/*!
* @brief Disable the FLEXSPI interrupts.
*
* @param base FLEXSPI peripheral base address.
* @param mask FLEXSPI interrupt source.
*/
static inline void FLEXSPI_DisableInterrupts(FLEXSPI_Type *base, uint32_t mask)
{
base->INTEN &= ~mask;
}
/* @} */
/*! @name DMA control */
/*@{*/
/*!
* @brief Enables or disables FLEXSPI IP Tx FIFO DMA requests.
*
* @param base FLEXSPI peripheral base address.
* @param enable Enable flag for transmit DMA request. Pass true for enable, false for disable.
*/
static inline void FLEXSPI_EnableTxDMA(FLEXSPI_Type *base, bool enable)
{
if (enable)
{
base->IPTXFCR |= FLEXSPI_IPTXFCR_TXDMAEN_MASK;
}
else
{
base->IPTXFCR &= ~FLEXSPI_IPTXFCR_TXDMAEN_MASK;
}
}
/*!
* @brief Enables or disables FLEXSPI IP Rx FIFO DMA requests.
*
* @param base FLEXSPI peripheral base address.
* @param enable Enable flag for receive DMA request. Pass true for enable, false for disable.
*/
static inline void FLEXSPI_EnableRxDMA(FLEXSPI_Type *base, bool enable)
{
if (enable)
{
base->IPRXFCR |= FLEXSPI_IPRXFCR_RXDMAEN_MASK;
}
else
{
base->IPRXFCR &= ~FLEXSPI_IPRXFCR_RXDMAEN_MASK;
}
}
/*!
* @brief Gets FLEXSPI IP tx fifo address for DMA transfer.
*
* @param base FLEXSPI peripheral base address.
* @retval The tx fifo address.
*/
static inline uint32_t FLEXSPI_GetTxFifoAddress(FLEXSPI_Type *base)
{
return (uint32_t)&base->TFDR[0];
}
/*!
* @brief Gets FLEXSPI IP rx fifo address for DMA transfer.
*
* @param base FLEXSPI peripheral base address.
* @retval The rx fifo address.
*/
static inline uint32_t FLEXSPI_GetRxFifoAddress(FLEXSPI_Type *base)
{
return (uint32_t)&base->RFDR[0];
}
/*@}*/
/*! @name FIFO control */
/*@{*/
/*! @brief Clears the FLEXSPI IP FIFO logic.
*
* @param base FLEXSPI peripheral base address.
* @param txFifo Pass true to reset TX FIFO.
* @param rxFifo Pass true to reset RX FIFO.
*/
static inline void FLEXSPI_ResetFifos(FLEXSPI_Type *base, bool txFifo, bool rxFifo)
{
if (txFifo)
{
base->IPTXFCR |= FLEXSPI_IPTXFCR_CLRIPTXF_MASK;
}
if (rxFifo)
{
base->IPRXFCR |= FLEXSPI_IPRXFCR_CLRIPRXF_MASK;
}
}
/*!
* @brief Gets the valid data entries in the FLEXSPI FIFOs.
*
* @param base FLEXSPI peripheral base address.
* @param[out] txCount Pointer through which the current number of bytes in the transmit FIFO is returned.
* Pass NULL if this value is not required.
* @param[out] rxCount Pointer through which the current number of bytes in the receive FIFO is returned.
* Pass NULL if this value is not required.
*/
static inline void FLEXSPI_GetFifoCounts(FLEXSPI_Type *base, size_t *txCount, size_t *rxCount)
{
if (txCount)
{
*txCount = (((base->IPTXFSTS) & FLEXSPI_IPTXFSTS_FILL_MASK) >> FLEXSPI_IPTXFSTS_FILL_SHIFT) * 8U;
}
if (rxCount)
{
*rxCount = (((base->IPRXFSTS) & FLEXSPI_IPRXFSTS_FILL_MASK) >> FLEXSPI_IPRXFSTS_FILL_SHIFT) * 8U;
}
}
/*@}*/
/*!
* @name Status
* @{
*/
/*!
* @brief Get the FLEXSPI interrupt status flags.
*
* @param base FLEXSPI peripheral base address.
* @retval interrupt status flag, use status flag to AND #flexspi_flags_t could get the related status.
*/
static inline uint32_t FLEXSPI_GetInterruptStatusFlags(FLEXSPI_Type *base)
{
return base->INTR;
}
/*!
* @brief Get the FLEXSPI interrupt status flags.
*
* @param base FLEXSPI peripheral base address.
* @param interrupt status flag.
*/
static inline void FLEXSPI_ClearInterruptStatusFlags(FLEXSPI_Type *base, uint32_t mask)
{
base->INTR |= mask;
}
#if !((defined(FSL_FEATURE_FLEXSPI_HAS_NO_DATA_LEARN)) && (FSL_FEATURE_FLEXSPI_HAS_NO_DATA_LEARN))
/*! @brief Gets the sampling clock phase selection after Data Learning.
*
* @param base FLEXSPI peripheral base address.
* @param portAPhase Pointer to a uint8_t type variable to receive the selected clock phase on PORTA.
* @param portBPhase Pointer to a uint8_t type variable to receive the selected clock phase on PORTB.
*/
static inline void FLEXSPI_GetDataLearningPhase(FLEXSPI_Type *base, uint8_t *portAPhase, uint8_t *portBPhase)
{
if (portAPhase)
{
*portAPhase = (base->STS0 & FLEXSPI_STS0_DATALEARNPHASEA_MASK) >> FLEXSPI_STS0_DATALEARNPHASEA_SHIFT;
}
if (portBPhase)
{
*portBPhase = (base->STS0 & FLEXSPI_STS0_DATALEARNPHASEB_MASK) >> FLEXSPI_STS0_DATALEARNPHASEB_SHIFT;
}
}
#endif
/*! @brief Gets the trigger source of current command sequence granted by arbitrator.
*
* @param base FLEXSPI peripheral base address.
* @retval trigger source of current command sequence.
*/
static inline flexspi_arb_command_source_t FLEXSPI_GetArbitratorCommandSource(FLEXSPI_Type *base)
{
return (flexspi_arb_command_source_t)((base->STS0 & FLEXSPI_STS0_ARBCMDSRC_MASK) >> FLEXSPI_STS0_ARBCMDSRC_SHIFT);
}
/*! @brief Gets the error code when IP command error detected.
*
* @param base FLEXSPI peripheral base address.
* @param index Pointer to a uint8_t type variable to receive the sequence index when error detected.
* @retval error code when IP command error detected.
*/
static inline flexspi_ip_error_code_t FLEXSPI_GetIPCommandErrorCode(FLEXSPI_Type *base, uint8_t *index)
{
*index = (base->STS1 & FLEXSPI_STS1_IPCMDERRID_MASK) >> FLEXSPI_STS1_IPCMDERRID_SHIFT;
return (flexspi_ip_error_code_t)((base->STS1 & FLEXSPI_STS1_IPCMDERRCODE_MASK) >> FLEXSPI_STS1_IPCMDERRCODE_SHIFT);
}
/*! @brief Gets the error code when AHB command error detected.
*
* @param base FLEXSPI peripheral base address.
* @param index Pointer to a uint8_t type variable to receive the sequence index when error detected.
* @retval error code when AHB command error detected.
*/
static inline flexspi_ahb_error_code_t FLEXSPI_GetAHBCommandErrorCode(FLEXSPI_Type *base, uint8_t *index)
{
*index = (base->STS1 & FLEXSPI_STS1_AHBCMDERRID_MASK) >> FLEXSPI_STS1_AHBCMDERRID_SHIFT;
return (flexspi_ahb_error_code_t)((base->STS1 & FLEXSPI_STS1_AHBCMDERRCODE_MASK) >>
FLEXSPI_STS1_AHBCMDERRCODE_SHIFT);
}
/*! @brief Returns whether the bus is idle.
*
* @param base FLEXSPI peripheral base address.
* @retval true Bus is idle.
* @retval false Bus is busy.
*/
static inline bool FLEXSPI_GetBusIdleStatus(FLEXSPI_Type *base)
{
return (base->STS0 & FLEXSPI_STS0_ARBIDLE_MASK) && (base->STS0 & FLEXSPI_STS0_SEQIDLE_MASK);
}
/*@}*/
/*!
* @name Bus Operations
* @{
*/
/*! @brief Enables/disables the FLEXSPI IP command parallel mode.
*
* @param base FLEXSPI peripheral base address.
* @param enable True means enable parallel mode, false means disable parallel mode.
*/
static inline void FLEXSPI_EnableIPParallelMode(FLEXSPI_Type *base, bool enable)
{
if (enable)
{
base->IPCR1 |= FLEXSPI_IPCR1_IPAREN_MASK;
}
else
{
base->IPCR1 &= ~FLEXSPI_IPCR1_IPAREN_MASK;
}
}
/*! @brief Enables/disables the FLEXSPI AHB command parallel mode.
*
* @param base FLEXSPI peripheral base address.
* @param enable True means enable parallel mode, false means disable parallel mode.
*/
static inline void FLEXSPI_EnableAHBParallelMode(FLEXSPI_Type *base, bool enable)
{
if (enable)
{
base->AHBCR |= FLEXSPI_AHBCR_APAREN_MASK;
}
else
{
base->AHBCR &= ~FLEXSPI_AHBCR_APAREN_MASK;
}
}
/*! @brief Updates the LUT table.
*
* @param base FLEXSPI peripheral base address.
* @param index From which index start to update. It could be any index of the LUT table, which
* also allows user to update command content inside a command. Each command consists of up to
* 8 instructions and occupy 4*32-bit memory.
* @param cmd Command sequence array.
* @param count Number of sequences.
*/
void FLEXSPI_UpdateLUT(FLEXSPI_Type *base, uint32_t index, const uint32_t *cmd, uint32_t count);
/*!
* @brief Writes data into FIFO.
*
* @param base FLEXSPI peripheral base address
* @param data The data bytes to send
* @param fifoIndex Destination fifo index.
*/
static inline void FLEXSPI_WriteData(FLEXSPI_Type *base, uint32_t data, uint8_t fifoIndex)
{
base->TFDR[fifoIndex] = data;
}
/*!
* @brief Receives data from data FIFO.
*
* @param base FLEXSPI peripheral base address
* @param fifoIndex Source fifo index.
* @return The data in the FIFO.
*/
static inline uint32_t FLEXSPI_ReadData(FLEXSPI_Type *base, uint8_t fifoIndex)
{
return base->RFDR[fifoIndex];
}
/*!
* @brief Sends a buffer of data bytes using blocking method.
* @note This function blocks via polling until all bytes have been sent.
* @param base FLEXSPI peripheral base address
* @param buffer The data bytes to send
* @param size The number of data bytes to send
* @retval kStatus_Success write success without error
* @retval kStatus_FLEXSPI_SequenceExecutionTimeout sequence execution timeout
* @retval kStatus_FLEXSPI_IpCommandSequenceError IP command sequencen error detected
* @retval kStatus_FLEXSPI_IpCommandGrantTimeout IP command grant timeout detected
*/
status_t FLEXSPI_WriteBlocking(FLEXSPI_Type *base, uint32_t *buffer, size_t size);
/*!
* @brief Receives a buffer of data bytes using a blocking method.
* @note This function blocks via polling until all bytes have been sent.
* @param base FLEXSPI peripheral base address
* @param buffer The data bytes to send
* @param size The number of data bytes to receive
* @retval kStatus_Success read success without error
* @retval kStatus_FLEXSPI_SequenceExecutionTimeout sequence execution timeout
* @retval kStatus_FLEXSPI_IpCommandSequenceError IP command sequencen error detected
* @retval kStatus_FLEXSPI_IpCommandGrantTimeout IP command grant timeout detected
*/
status_t FLEXSPI_ReadBlocking(FLEXSPI_Type *base, uint32_t *buffer, size_t size);
/*!
* @brief Execute command to transfer a buffer data bytes using a blocking method.
* @param base FLEXSPI peripheral base address
* @param xfer pointer to the transfer structure.
* @retval kStatus_Success command transfer success without error
* @retval kStatus_FLEXSPI_SequenceExecutionTimeout sequence execution timeout
* @retval kStatus_FLEXSPI_IpCommandSequenceError IP command sequencen error detected
* @retval kStatus_FLEXSPI_IpCommandGrantTimeout IP command grant timeout detected
*/
status_t FLEXSPI_TransferBlocking(FLEXSPI_Type *base, flexspi_transfer_t *xfer);
/*! @} */
/*!
* @name Transactional
* @{
*/
/*!
* @brief Initializes the FLEXSPI handle which is used in transactional functions.
*
* @param base FLEXSPI peripheral base address.
* @param handle pointer to flexspi_handle_t structure to store the transfer state.
* @param callback pointer to user callback function.
* @param userData user parameter passed to the callback function.
*/
void FLEXSPI_TransferCreateHandle(FLEXSPI_Type *base,
flexspi_handle_t *handle,
flexspi_transfer_callback_t callback,
void *userData);
/*!
* @brief Performs a interrupt non-blocking transfer on the FLEXSPI bus.
*
* @note Calling the API returns immediately after transfer initiates. The user needs
* to call FLEXSPI_GetTransferCount to poll the transfer status to check whether
* the transfer is finished. If the return status is not kStatus_FLEXSPI_Busy, the transfer
* is finished. For FLEXSPI_Read, the dataSize should be multiple of rx watermark levle, or
* FLEXSPI could not read data properly.
*
* @param base FLEXSPI peripheral base address.
* @param handle pointer to flexspi_handle_t structure which stores the transfer state.
* @param xfer pointer to flexspi_transfer_t structure.
* @retval kStatus_Success Successfully start the data transmission.
* @retval kStatus_FLEXSPI_Busy Previous transmission still not finished.
*/
status_t FLEXSPI_TransferNonBlocking(FLEXSPI_Type *base, flexspi_handle_t *handle, flexspi_transfer_t *xfer);
/*!
* @brief Gets the master transfer status during a interrupt non-blocking transfer.
*
* @param base FLEXSPI peripheral base address.
* @param handle pointer to flexspi_handle_t structure which stores the transfer state.
* @param count Number of bytes transferred so far by the non-blocking transaction.
* @retval kStatus_InvalidArgument count is Invalid.
* @retval kStatus_Success Successfully return the count.
*/
status_t FLEXSPI_TransferGetCount(FLEXSPI_Type *base, flexspi_handle_t *handle, size_t *count);
/*!
* @brief Aborts an interrupt non-blocking transfer early.
*
* @note This API can be called at any time when an interrupt non-blocking transfer initiates
* to abort the transfer early.
*
* @param base FLEXSPI peripheral base address.
* @param handle pointer to flexspi_handle_t structure which stores the transfer state
*/
void FLEXSPI_TransferAbort(FLEXSPI_Type *base, flexspi_handle_t *handle);
/*!
* @brief Master interrupt handler.
*
* @param base FLEXSPI peripheral base address.
* @param handle pointer to flexspi_handle_t structure.
*/
void FLEXSPI_TransferHandleIRQ(FLEXSPI_Type *base, flexspi_handle_t *handle);
/*! @} */
#if defined(__cplusplus)
}
#endif /*_cplusplus. */
/*@}*/
#endif /* __FSL_FLEXSPI_H_ */