rt-thread/bsp/stm32/stm32l475-atk-pandora/applications/arduino_pinout/pins_arduino.h

98 lines
2.5 KiB
C

/*
* Copyright (c) 2006-2022, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2021-12-10 Meco Man first version
* 2022-09-18 Meco Man sort pinout out
*/
#ifndef Pins_Arduino_h
#define Pins_Arduino_h
/* pins alias. Must keep in sequence */
#define D0 (0)
#define D1 (1)
#define D2 (2)
#define D3 (3)
#define D4 (4)
#define D5 (5)
#define D6 (6)
#define D7 (7)
#define D8 (8)
#define D9 (9)
#define D10 (10)
#define D11 (11)
#define D12 (12)
#define D13 (13)
#define D14 (14)
#define D15 (15)
#define D16 (16)
#define D17 (17)
#define D18 (18)
#define D19 (19)
#define D20 (20)
#define D21 (21)
#define D22 (22)
#define D23 (23)
#define D24 (24)
#define D25 (25)
#define D26 (26)
#define D27 (27)
#define D28 (28)
#define D29 (29)
#define D30 (30)
#define D31 (31)
#define D32 (32)
#define D33 (33)
#define D34 (34)
#define D35 (35)
#define D36 (36)
#define D37 (37)
#define D38 (38)
#define D39 (39)
#define A0 (40)
#define A1 (41)
#define A2 (42)
#define A3 (43)
#define DAC0 (44)
#define F_CPU 80000000L /* CPU:80MHz */
#define LED_BUILTIN D22 /* Default Built-in LED */
/* Serial2 - PA2-TX PA3-RX */
#define RTDUINO_SERIAL2_DEVICE_NAME "uart2"
/* I2C */
#if defined(BSP_USING_ARDUINO_AHT10)
#define RTDUINO_DEFAULT_IIC_BUS_NAME "i2c4" /* i2c4 - AHT10 (On Board) */
#elif defined(BSP_USING_ARDUINO_AP3216) || defined(BSP_USING_ARDUINO_ICM20608)
#define RTDUINO_DEFAULT_IIC_BUS_NAME "i2c3" /* i2c3 - ICM20608, AP3216C (On Board) */
#else
#define RTDUINO_DEFAULT_IIC_BUS_NAME "i2c1" /* i2c1 - PC7-SDA PC6-SCL (User I2C) */
#endif /* BSP_USING_ARDUINO_AHT10 */
/* SPI */
#if defined(BSP_USING_ARDUINO_ST7789)
/*
* SPI LCD ST7789 (spi3)
* LCD-SPI-SDA PB5
* LCD-SPI-SCK PB3
* LCD-SPI-CS PD7
* LCD-POWER PB7
* LCD-RESET PB6
* LCD-WR/DC PB4
*/
#define SS D36 /* LCD-SPI-CS PD7 */
#define RTDUINO_DEFAULT_SPI_BUS_NAME "spi3" /* LCD SPI Bus */
#else
/* spi2 - PB13-SCK PB14-MISO PB15-MOSI */
#define SS D28 /* Chip select pin of default spi */
#define RTDUINO_DEFAULT_SPI_BUS_NAME "spi2"
#endif /* BSP_USING_ARDUINO_ST7789 */
#endif /* Pins_Arduino_h */