rt-thread/bsp/lpc54114-lite/Libraries/devices/LPC54114/drivers/fsl_reset.h

232 lines
9.7 KiB
C

/*
* The Clear BSD License
* Copyright (c) 2016, Freescale Semiconductor, Inc.
* Copyright (c) 2016, NXP
* All rights reserved.
*
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted (subject to the limitations in the disclaimer below) provided
* that the following conditions are met:
*
* o Redistributions of source code must retain the above copyright notice, this list
* of conditions and the following disclaimer.
*
* o Redistributions in binary form must reproduce the above copyright notice, this
* list of conditions and the following disclaimer in the documentation and/or
* other materials provided with the distribution.
*
* o Neither the name of copyright holder nor the names of its
* contributors may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE GRANTED BY THIS LICENSE.
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _FSL_RESET_H_
#define _FSL_RESET_H_
#include <assert.h>
#include <stdbool.h>
#include <stdint.h>
#include <string.h>
#include "fsl_device_registers.h"
/*!
* @addtogroup ksdk_common
* @{
*/
/*******************************************************************************
* Definitions
******************************************************************************/
/*! @name Driver version */
/*@{*/
/*! @brief reset driver version 2.0.0. */
#define FSL_RESET_DRIVER_VERSION (MAKE_VERSION(2, 0, 0))
/*@}*/
/*!
* @brief Enumeration for peripheral reset control bits
*
* Defines the enumeration for peripheral reset control bits in PRESETCTRL/ASYNCPRESETCTRL registers
*/
typedef enum _SYSCON_RSTn
{
kFLASH_RST_SHIFT_RSTn = 0 | 7U, /**< Flash controller reset control */
kFMC_RST_SHIFT_RSTn = 0 | 8U, /**< Flash accelerator reset control */
kMUX_RST_SHIFT_RSTn = 0 | 11U, /**< Input mux reset control */
kIOCON_RST_SHIFT_RSTn = 0 | 13U, /**< IOCON reset control */
kGPIO0_RST_SHIFT_RSTn = 0 | 14U, /**< GPIO0 reset control */
kGPIO1_RST_SHIFT_RSTn = 0 | 15U, /**< GPIO1 reset control */
kPINT_RST_SHIFT_RSTn = 0 | 18U, /**< Pin interrupt (PINT) reset control */
kGINT_RST_SHIFT_RSTn = 0 | 19U, /**< Grouped interrupt (PINT) reset control. */
kDMA_RST_SHIFT_RSTn = 0 | 20U, /**< DMA reset control */
kCRC_RST_SHIFT_RSTn = 0 | 21U, /**< CRC reset control */
kWWDT_RST_SHIFT_RSTn = 0 | 22U, /**< Watchdog timer reset control */
kADC0_RST_SHIFT_RSTn = 0 | 27U, /**< ADC0 reset control */
kMRT_RST_SHIFT_RSTn = 65536 | 0U, /**< Multi-rate timer (MRT) reset control */
kSCT0_RST_SHIFT_RSTn = 65536 | 2U, /**< SCTimer/PWM 0 (SCT0) reset control */
kUTICK_RST_SHIFT_RSTn = 65536 | 10U, /**< Micro-tick timer reset control */
kFC0_RST_SHIFT_RSTn = 65536 | 11U, /**< Flexcomm Interface 0 reset control */
kFC1_RST_SHIFT_RSTn = 65536 | 12U, /**< Flexcomm Interface 1 reset control */
kFC2_RST_SHIFT_RSTn = 65536 | 13U, /**< Flexcomm Interface 2 reset control */
kFC3_RST_SHIFT_RSTn = 65536 | 14U, /**< Flexcomm Interface 3 reset control */
kFC4_RST_SHIFT_RSTn = 65536 | 15U, /**< Flexcomm Interface 4 reset control */
kFC5_RST_SHIFT_RSTn = 65536 | 16U, /**< Flexcomm Interface 5 reset control */
kFC6_RST_SHIFT_RSTn = 65536 | 17U, /**< Flexcomm Interface 6 reset control */
kFC7_RST_SHIFT_RSTn = 65536 | 18U, /**< Flexcomm Interface 7 reset control */
kDMIC_RST_SHIFT_RSTn = 65536 | 19U, /**< Digital microphone interface reset control */
kCT32B2_RST_SHIFT_RSTn = 65536 | 22U, /**< CT32B2 reset control */
kUSB_RST_SHIFT_RSTn = 65536 | 25U, /**< USB reset control */
kCT32B0_RST_SHIFT_RSTn = 65536 | 26U, /**< CT32B0 reset control */
kCT32B1_RST_SHIFT_RSTn = 65536 | 27U, /**< CT32B1 reset control */
kCT32B3_RST_SHIFT_RSTn = 67108864 | 13U, /**< CT32B3 reset control */
kCT32B4_RST_SHIFT_RSTn = 67108864 | 14U, /**< CT32B4 reset control */
} SYSCON_RSTn_t;
/** Array initializers with peripheral reset bits **/
#define ADC_RSTS \
{ \
kADC0_RST_SHIFT_RSTn \
} /* Reset bits for ADC peripheral */
#define CRC_RSTS \
{ \
kCRC_RST_SHIFT_RSTn \
} /* Reset bits for CRC peripheral */
#define DMA_RSTS \
{ \
kDMA_RST_SHIFT_RSTn \
} /* Reset bits for DMA peripheral */
#define DMIC_RSTS \
{ \
kDMIC_RST_SHIFT_RSTn \
} /* Reset bits for ADC peripheral */
#define FLEXCOMM_RSTS \
{ \
kFC0_RST_SHIFT_RSTn, kFC1_RST_SHIFT_RSTn, kFC2_RST_SHIFT_RSTn, kFC3_RST_SHIFT_RSTn, kFC4_RST_SHIFT_RSTn, \
kFC5_RST_SHIFT_RSTn, kFC6_RST_SHIFT_RSTn, kFC7_RST_SHIFT_RSTn \
} /* Reset bits for FLEXCOMM peripheral */
#define GINT_RSTS \
{ \
kGINT_RST_SHIFT_RSTn, kGINT_RST_SHIFT_RSTn \
} /* Reset bits for GINT peripheral. GINT0 & GINT1 share same slot */
#define GPIO_RSTS \
{ \
kGPIO0_RST_SHIFT_RSTn, kGPIO1_RST_SHIFT_RSTn \
} /* Reset bits for GPIO peripheral */
#define INPUTMUX_RSTS \
{ \
kMUX_RST_SHIFT_RSTn \
} /* Reset bits for INPUTMUX peripheral */
#define IOCON_RSTS \
{ \
kIOCON_RST_SHIFT_RSTn \
} /* Reset bits for IOCON peripheral */
#define FLASH_RSTS \
{ \
kFLASH_RST_SHIFT_RSTn, kFMC_RST_SHIFT_RSTn \
} /* Reset bits for Flash peripheral */
#define MRT_RSTS \
{ \
kMRT_RST_SHIFT_RSTn \
} /* Reset bits for MRT peripheral */
#define PINT_RSTS \
{ \
kPINT_RST_SHIFT_RSTn \
} /* Reset bits for PINT peripheral */
#define SCT_RSTS \
{ \
kSCT0_RST_SHIFT_RSTn \
} /* Reset bits for SCT peripheral */
#define CTIMER_RSTS \
{ \
kCT32B0_RST_SHIFT_RSTn, kCT32B1_RST_SHIFT_RSTn, kCT32B2_RST_SHIFT_RSTn, kCT32B3_RST_SHIFT_RSTn, \
kCT32B4_RST_SHIFT_RSTn \
} /* Reset bits for TIMER peripheral */
#define USB_RSTS \
{ \
kUSB_RST_SHIFT_RSTn \
} /* Reset bits for USB peripheral */
#define UTICK_RSTS \
{ \
kUTICK_RST_SHIFT_RSTn \
} /* Reset bits for UTICK peripheral */
#define WWDT_RSTS \
{ \
kWWDT_RST_SHIFT_RSTn \
} /* Reset bits for WWDT peripheral */
typedef SYSCON_RSTn_t reset_ip_name_t;
/*******************************************************************************
* API
******************************************************************************/
#if defined(__cplusplus)
extern "C" {
#endif
/*!
* @brief Assert reset to peripheral.
*
* Asserts reset signal to specified peripheral module.
*
* @param peripheral Assert reset to this peripheral. The enum argument contains encoding of reset register
* and reset bit position in the reset register.
*/
void RESET_SetPeripheralReset(reset_ip_name_t peripheral);
/*!
* @brief Clear reset to peripheral.
*
* Clears reset signal to specified peripheral module, allows it to operate.
*
* @param peripheral Clear reset to this peripheral. The enum argument contains encoding of reset register
* and reset bit position in the reset register.
*/
void RESET_ClearPeripheralReset(reset_ip_name_t peripheral);
/*!
* @brief Reset peripheral module.
*
* Reset peripheral module.
*
* @param peripheral Peripheral to reset. The enum argument contains encoding of reset register
* and reset bit position in the reset register.
*/
void RESET_PeripheralReset(reset_ip_name_t peripheral);
/*!
* @brief Set slave core to reset state and hold.
*/
void RESET_SetSlaveCoreReset(void);
/*!
* @brief Release slave core from reset state.
*/
void RESET_ClearSlaveCoreReset(void);
/*!
* @brief Reset slave core with the boot entry.
*/
void RESET_SlaveCoreReset(uint32_t bootAddr, uint32_t bootStackPointer);
#if defined(__cplusplus)
}
#endif
/*! @} */
#endif /* _FSL_RESET_H_ */