87 lines
2.2 KiB
C
87 lines
2.2 KiB
C
/*
|
|
* Copyright (c) 2006-2023, RT-Thread Development Team
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*
|
|
* Change Logs:
|
|
* Date Author Notes
|
|
* 2023-10-25 Raman Gopalan Initial version
|
|
* 2023-11-06 Raman Gopalan Abstraction for GPIO driver boilerplate
|
|
*/
|
|
|
|
#include <rtthread.h>
|
|
#include <rtdevice.h>
|
|
#include "gpio.h"
|
|
#include <rtdbg.h>
|
|
#include "drv_gpio.h"
|
|
|
|
#ifdef RT_USING_PIN
|
|
|
|
static void at32uc3_pin_mode(struct rt_device *dev, rt_base_t pin, rt_uint8_t mode)
|
|
{
|
|
RT_ASSERT((AVR32_BSP_GPIO_PMIN <= pin) && (pin <= AVR32_BSP_GPIO_PMAX));
|
|
/* Pointer to the register set for this GPIO port */
|
|
volatile avr32_gpio_port_t *gpio_regs = &AVR32_GPIO.port[pin >> 5];
|
|
|
|
/* Decide based on required mode */
|
|
switch (mode)
|
|
{
|
|
case PIN_MODE_OUTPUT:
|
|
gpio_regs->oders = 1 << (pin & 0x1F); /* Enable output driver */
|
|
gpio_regs->gpers = 1 << (pin & 0x1F); /* Make GPIO control this pin */
|
|
break;
|
|
case PIN_MODE_INPUT:
|
|
gpio_regs->oderc = 1 << (pin & 0x1F);
|
|
gpio_regs->gpers = 1 << (pin & 0x1F);
|
|
break;
|
|
case PIN_MODE_INPUT_PULLUP:
|
|
gpio_regs->puers = 1 << (pin & 0x1F);
|
|
break;
|
|
case PIN_MODE_INPUT_PULLDOWN:
|
|
LOG_W("Pull-down enable register not defined for this SOC.");
|
|
break;
|
|
case PIN_MODE_OUTPUT_OD:
|
|
LOG_W("The open-drain mode is not synthesized on the current AVR32 products.");
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void at32uc3_pin_write(struct rt_device *dev, rt_base_t pin, rt_uint8_t value)
|
|
{
|
|
RT_ASSERT((AVR32_BSP_GPIO_PMIN <= pin) && (pin <= AVR32_BSP_GPIO_PMAX));
|
|
if (value == PIN_HIGH)
|
|
{
|
|
gpio_set_gpio_pin(pin);
|
|
}
|
|
else
|
|
{
|
|
gpio_clr_gpio_pin(pin);
|
|
}
|
|
}
|
|
|
|
static rt_int8_t at32uc3_pin_read(struct rt_device *device, rt_base_t pin)
|
|
{
|
|
RT_ASSERT((AVR32_BSP_GPIO_PMIN <= pin) && (pin <= AVR32_BSP_GPIO_PMAX));
|
|
return (gpio_get_pin_value(pin) ? PIN_HIGH : PIN_LOW);
|
|
}
|
|
|
|
static const struct rt_pin_ops ops =
|
|
{
|
|
at32uc3_pin_mode,
|
|
at32uc3_pin_write,
|
|
at32uc3_pin_read,
|
|
RT_NULL,
|
|
RT_NULL,
|
|
RT_NULL,
|
|
RT_NULL,
|
|
};
|
|
|
|
int rt_hw_gpio_init(void)
|
|
{
|
|
rt_device_pin_register("gpio", &ops, RT_NULL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#endif /* RT_USING_PIN */
|