rt-thread/bsp/imxrt/libraries/drivers/usb/device/usb_device_dci.h

178 lines
9.5 KiB
C

/*
* Copyright (c) 2015 - 2016, Freescale Semiconductor, Inc.
* Copyright 2016 NXP
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* o Redistributions of source code must retain the above copyright notice, this list
* of conditions and the following disclaimer.
*
* o Redistributions in binary form must reproduce the above copyright notice, this
* list of conditions and the following disclaimer in the documentation and/or
* other materials provided with the distribution.
*
* o Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef __USB_DEVICE_DCI_H__
#define __USB_DEVICE_DCI_H__
/*!
* @addtogroup usb_device_controller_driver
* @{
*/
/*******************************************************************************
* Definitions
******************************************************************************/
/*! @brief Macro to define controller handle */
#define usb_device_controller_handle usb_device_handle
/*! @brief Available notify types for device notification */
typedef enum _usb_device_notification
{
kUSB_DeviceNotifyBusReset = 0x10U, /*!< Reset signal detected */
kUSB_DeviceNotifySuspend, /*!< Suspend signal detected */
kUSB_DeviceNotifyResume, /*!< Resume signal detected */
kUSB_DeviceNotifyLPMSleep, /*!< LPM signal detected */
kUSB_DeviceNotifyLPMResume, /*!< Resume signal detected */
kUSB_DeviceNotifyError, /*!< Errors happened in bus */
kUSB_DeviceNotifyDetach, /*!< Device disconnected from a host */
kUSB_DeviceNotifyAttach, /*!< Device connected to a host */
#if (defined(USB_DEVICE_CHARGER_DETECT_ENABLE) && (USB_DEVICE_CHARGER_DETECT_ENABLE > 0U))
kUSB_DeviceNotifyDcdTimeOut, /*!< Device charger detection timeout */
kUSB_DeviceNotifyDcdUnknownPortType, /*!< Device charger detection unknown port type */
kUSB_DeviceNotifySDPDetected, /*!< The SDP facility is detected */
kUSB_DeviceNotifyChargingPortDetected, /*!< The charging port is detected */
kUSB_DeviceNotifyChargingHostDetected, /*!< The CDP facility is detected */
kUSB_DeviceNotifyDedicatedChargerDetected, /*!< The DCP facility is detected */
#endif
} usb_device_notification_t;
/*! @brief Device notification message structure */
typedef struct _usb_device_callback_message_struct
{
uint8_t *buffer; /*!< Transferred buffer */
uint32_t length; /*!< Transferred data length */
uint8_t code; /*!< Notification code */
uint8_t isSetup; /*!< Is in a setup phase */
} usb_device_callback_message_struct_t;
/*! @brief Control type for controller */
typedef enum _usb_device_control_type
{
kUSB_DeviceControlRun = 0U, /*!< Enable the device functionality */
kUSB_DeviceControlStop, /*!< Disable the device functionality */
kUSB_DeviceControlEndpointInit, /*!< Initialize a specified endpoint */
kUSB_DeviceControlEndpointDeinit, /*!< De-initialize a specified endpoint */
kUSB_DeviceControlEndpointStall, /*!< Stall a specified endpoint */
kUSB_DeviceControlEndpointUnstall, /*!< Unstall a specified endpoint */
kUSB_DeviceControlGetDeviceStatus, /*!< Get device status */
kUSB_DeviceControlGetEndpointStatus, /*!< Get endpoint status */
kUSB_DeviceControlSetDeviceAddress, /*!< Set device address */
kUSB_DeviceControlGetSynchFrame, /*!< Get current frame */
kUSB_DeviceControlResume, /*!< Drive controller to generate a resume signal in USB bus */
kUSB_DeviceControlSleepResume, /*!< Drive controller to generate a LPM resume signal in USB bus */
kUSB_DeviceControlSuspend, /*!< Drive controller to enetr into suspend mode */
kUSB_DeviceControlSleep, /*!< Drive controller to enetr into sleep mode */
kUSB_DeviceControlSetDefaultStatus, /*!< Set controller to default status */
kUSB_DeviceControlGetSpeed, /*!< Get current speed */
kUSB_DeviceControlGetOtgStatus, /*!< Get OTG status */
kUSB_DeviceControlSetOtgStatus, /*!< Set OTG status */
kUSB_DeviceControlSetTestMode, /*!< Drive xCHI into test mode */
kUSB_DeviceControlGetRemoteWakeUp, /*!< Get flag of LPM Remote Wake-up Enabled by USB host. */
#if (defined(USB_DEVICE_CHARGER_DETECT_ENABLE) && (USB_DEVICE_CHARGER_DETECT_ENABLE > 0U))
kUSB_DeviceControlDcdInitModule,
kUSB_DeviceControlDcdDeinitModule,
#endif
} usb_device_control_type_t;
/*! @brief USB device controller initialization function typedef */
typedef usb_status_t (*usb_device_controller_init_t)(uint8_t controllerId,
usb_device_handle handle,
usb_device_controller_handle *controllerHandle);
/*! @brief USB device controller de-initialization function typedef */
typedef usb_status_t (*usb_device_controller_deinit_t)(usb_device_controller_handle controllerHandle);
/*! @brief USB device controller send data function typedef */
typedef usb_status_t (*usb_device_controller_send_t)(usb_device_controller_handle controllerHandle,
uint8_t endpointAddress,
uint8_t *buffer,
uint32_t length);
/*! @brief USB device controller receive data function typedef */
typedef usb_status_t (*usb_device_controller_recv_t)(usb_device_controller_handle controllerHandle,
uint8_t endpointAddress,
uint8_t *buffer,
uint32_t length);
/*! @brief USB device controller cancel transfer function in a specified endpoint typedef */
typedef usb_status_t (*usb_device_controller_cancel_t)(usb_device_controller_handle controllerHandle,
uint8_t endpointAddress);
/*! @brief USB device controller control function typedef */
typedef usb_status_t (*usb_device_controller_control_t)(usb_device_controller_handle controllerHandle,
usb_device_control_type_t command,
void *param);
/*! @brief USB device controller interface structure */
typedef struct _usb_device_controller_interface_struct
{
usb_device_controller_init_t deviceInit; /*!< Controller initialization */
usb_device_controller_deinit_t deviceDeinit; /*!< Controller de-initialization */
usb_device_controller_send_t deviceSend; /*!< Controller send data */
usb_device_controller_recv_t deviceRecv; /*!< Controller receive data */
usb_device_controller_cancel_t deviceCancel; /*!< Controller cancel transfer */
usb_device_controller_control_t deviceControl; /*!< Controller control */
} usb_device_controller_interface_struct_t;
/*! @brief USB device status structure */
typedef struct _usb_device_struct
{
#if ((defined(USB_DEVICE_CONFIG_REMOTE_WAKEUP)) && (USB_DEVICE_CONFIG_REMOTE_WAKEUP > 0U))
volatile uint64_t hwTick; /*!< Current hw tick(ms)*/
#endif
usb_device_controller_handle controllerHandle; /*!< Controller handle */
const usb_device_controller_interface_struct_t *controllerInterface; /*!< Controller interface handle */
#if USB_DEVICE_CONFIG_USE_TASK
usb_osa_msgq_handle notificationQueue; /*!< Message queue */
#endif
usb_device_callback_t deviceCallback; /*!< Device callback function pointer */
usb_device_endpoint_callback_struct_t
epCallback[USB_DEVICE_CONFIG_ENDPOINTS << 1U]; /*!< Endpoint callback function structure */
uint8_t deviceAddress; /*!< Current device address */
uint8_t controllerId; /*!< Controller ID */
uint8_t state; /*!< Current device state */
#if ((defined(USB_DEVICE_CONFIG_REMOTE_WAKEUP)) && (USB_DEVICE_CONFIG_REMOTE_WAKEUP > 0U))
uint8_t remotewakeup; /*!< Remote wakeup is enabled or not */
#endif
uint8_t isResetting; /*!< Is doing device reset or not */
#if (defined(USB_DEVICE_CONFIG_USE_TASK) && (USB_DEVICE_CONFIG_USE_TASK > 0U))
uint8_t epCallbackDirectly; /*!< Whether call ep callback directly when the task is enabled */
#endif
} usb_device_struct_t;
/*******************************************************************************
* API
******************************************************************************/
/*! @}*/
#endif /* __USB_DEVICE_DCI_H__ */