345 lines
13 KiB
C
345 lines
13 KiB
C
////////////////////////////////////////////////////////////////////////////////
|
|
/// @file hal_gpio.c
|
|
/// @author AE TEAM
|
|
/// @brief THIS FILE PROVIDES ALL THE GPIO FIRMWARE FUNCTIONS.
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @attention
|
|
///
|
|
/// THE EXISTING FIRMWARE IS ONLY FOR REFERENCE, WHICH IS DESIGNED TO PROVIDE
|
|
/// CUSTOMERS WITH CODING INFORMATION ABOUT THEIR PRODUCTS SO THEY CAN SAVE
|
|
/// TIME. THEREFORE, MINDMOTION SHALL NOT BE LIABLE FOR ANY DIRECT, INDIRECT OR
|
|
/// CONSEQUENTIAL DAMAGES ABOUT ANY CLAIMS ARISING OUT OF THE CONTENT OF SUCH
|
|
/// HARDWARE AND/OR THE USE OF THE CODING INFORMATION CONTAINED HEREIN IN
|
|
/// CONNECTION WITH PRODUCTS MADE BY CUSTOMERS.
|
|
///
|
|
/// <H2><CENTER>© COPYRIGHT MINDMOTION </CENTER></H2>
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
|
|
// Define to prevent recursive inclusion
|
|
#define _HAL_GPIO_C_
|
|
|
|
// Files includes
|
|
#include "reg_exti.h"
|
|
#include "hal_rcc.h"
|
|
#include "hal_gpio.h"
|
|
|
|
|
|
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @addtogroup MM32_Hardware_Abstract_Layer
|
|
/// @{
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @addtogroup GPIO_HAL
|
|
/// @{
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @addtogroup GPIO_Exported_Functions
|
|
/// @{
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @brief Deinitializes the gpio peripheral registers to their default reset
|
|
/// values.
|
|
/// @param gpio: select the GPIO peripheral.
|
|
/// @retval None.
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
void GPIO_DeInit(GPIO_TypeDef* gpio)
|
|
{
|
|
switch (*(vu32*)&gpio) {
|
|
case (u32)GPIOA:
|
|
RCC_AHBPeriphClockCmd(RCC_AHBENR_GPIOA, DISABLE);
|
|
break;
|
|
case (u32)GPIOB:
|
|
RCC_AHBPeriphClockCmd(RCC_AHBENR_GPIOB, DISABLE);
|
|
break;
|
|
case (u32)GPIOC:
|
|
RCC_AHBPeriphClockCmd(RCC_AHBENR_GPIOC, DISABLE);
|
|
break;
|
|
case (u32)GPIOD:
|
|
RCC_AHBPeriphClockCmd(RCC_AHBENR_GPIOD, DISABLE);
|
|
break;
|
|
case (u32)GPIOE:
|
|
RCC_AHBPeriphClockCmd(RCC_AHBENR_GPIOE, DISABLE);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @brief Deinitializes the Alternate Functions (remap, event control
|
|
/// and EXTI configuration) registers to their default reset values.
|
|
/// @param None.
|
|
/// @retval None.
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
void GPIO_AFIODeInit()
|
|
{
|
|
GPIOA->AFRL = 0xFFFFFFFF;
|
|
GPIOA->AFRH = 0xF00FFFFF; // PA14:SWCLK, PA13:PSWDIO
|
|
GPIOB->AFRL = 0xFFFFFFFF;
|
|
GPIOB->AFRH = 0xFFFFFFFF;
|
|
GPIOC->AFRL = 0xFFFFFFFF;
|
|
GPIOC->AFRH = 0xFFFFFFFF;
|
|
GPIOD->AFRL = 0xFFFFFFFF;
|
|
GPIOD->AFRH = 0xFFFFFFFF;
|
|
GPIOE->AFRL = 0xFFFFFFFF;
|
|
GPIOE->AFRH = 0xFFFFFFFF;
|
|
}
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @brief Initializes the gpio peripheral according to the specified
|
|
/// parameters in the init_struct.
|
|
/// @param gpio: select the GPIO peripheral.
|
|
/// @param init_struct: pointer to a GPIO_InitTypeDef structure that
|
|
/// contains the configuration information for the specified GPIO
|
|
/// peripheral.
|
|
/// @retval None.
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
void GPIO_Init(GPIO_TypeDef* gpio, GPIO_InitTypeDef* init_struct)
|
|
{
|
|
u8 idx;
|
|
u8 i;
|
|
u32 tmp;
|
|
__IO u32* reg ;
|
|
|
|
// 1x
|
|
u32 dat = init_struct->GPIO_Mode & 0x0F;
|
|
if (init_struct->GPIO_Mode & 0x10)
|
|
dat |= init_struct->GPIO_Speed;
|
|
|
|
// 0x
|
|
reg = &gpio->CRL;
|
|
for (i = 0; i < 8; i++) {
|
|
idx = i * 4;
|
|
if ((init_struct->GPIO_Pin) & (1 << i)) {
|
|
*reg = (*reg & ~(0xF << idx)) | (dat << idx);
|
|
}
|
|
}
|
|
|
|
reg = &gpio->CRH;
|
|
tmp = init_struct->GPIO_Pin >> 8;
|
|
for (i = 0; i < 8; i++) {
|
|
idx = i * 4;
|
|
if (tmp & (1 << i)) {
|
|
*reg = (*reg & ~(0xF << idx)) | (dat << idx);
|
|
}
|
|
}
|
|
|
|
// 2x,4x
|
|
if (init_struct->GPIO_Mode == GPIO_Mode_IPD)
|
|
gpio->BRR |= init_struct->GPIO_Pin;
|
|
else if (init_struct->GPIO_Mode == GPIO_Mode_IPU)
|
|
gpio->BSRR |= init_struct->GPIO_Pin;
|
|
}
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @brief Fills each init_struct member with its default value.
|
|
/// @param init_struct : pointer to a GPIO_InitTypeDef structure
|
|
/// which will be initialized.
|
|
/// @retval : None
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
void GPIO_StructInit(GPIO_InitTypeDef* init_struct)
|
|
{
|
|
// Reset GPIO init structure parameters values
|
|
init_struct->GPIO_Pin = GPIO_Pin_All;
|
|
init_struct->GPIO_Speed = GPIO_Speed_2MHz;
|
|
init_struct->GPIO_Mode = GPIO_Mode_FLOATING;
|
|
}
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @brief Reads the input data of specified GPIO port pin.
|
|
/// @param gpio: select the GPIO peripheral.
|
|
/// @param pin: specifies the port pin to be read.
|
|
/// This parameter can be GPIO_Pin_x where x can be (0..15).
|
|
/// @retval The input port pin value.
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
bool GPIO_ReadInputDataBit(GPIO_TypeDef* gpio, u16 pin)
|
|
{
|
|
return ((gpio->IDR & pin)) ? Bit_SET : Bit_RESET;
|
|
}
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @brief Reads all GPIO port pins input data.
|
|
/// @param gpio: select the GPIO peripheral.
|
|
/// @retval GPIO port input data value.
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
u16 GPIO_ReadInputData(GPIO_TypeDef* gpio)
|
|
{
|
|
return gpio->IDR;
|
|
}
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @brief Reads the output data of specified GPIO port pin.
|
|
/// @param gpio: select the GPIO peripheral.
|
|
/// @param pin: specifies the port bit to be read.
|
|
/// This parameter can be GPIO_Pin_x where x can be (0..15).
|
|
/// @retval The output port pin value.
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
bool GPIO_ReadOutputDataBit(GPIO_TypeDef* gpio, u16 pin)
|
|
{
|
|
return (gpio->ODR & pin) ? Bit_SET : Bit_RESET;
|
|
}
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @brief Reads all GPIO port pins output data.
|
|
/// @param gpio: select the GPIO peripheral.
|
|
/// @retval GPIO port output data value.
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
u16 GPIO_ReadOutputData(GPIO_TypeDef* gpio)
|
|
{
|
|
return gpio->ODR;
|
|
}
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @brief Sets the selected GPIO port pin.
|
|
/// @param gpio: where x can be (A..D) to select the GPIO peripheral.
|
|
/// @param pin: specifies the port pins to be written.
|
|
/// This parameter can be any combination of GPIO_Pin_x where x can be
|
|
/// (0..15).
|
|
/// @retval None.
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
void GPIO_SetBits(GPIO_TypeDef* gpio, u16 pin)
|
|
{
|
|
gpio->BSRR = pin;
|
|
}
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @brief Clears the selected GPIO port bit.
|
|
/// @param gpio: where x can be (A..D) to select the GPIO peripheral.
|
|
/// @param pin: specifies the port pins to be written.
|
|
/// This parameter can be any combination of GPIO_Pin_x where x can be
|
|
/// (0..15).
|
|
/// @retval None.
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
void GPIO_ResetBits(GPIO_TypeDef* gpio, u16 pin)
|
|
{
|
|
gpio->BRR = pin;
|
|
}
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @brief Sets or clears the selected GPIO port pin.
|
|
/// @param gpio: select the GPIO peripheral.
|
|
/// @param pin: specifies the port bit to be written.
|
|
/// This parameter can be one of GPIO_Pin_x where x can be (0..15).
|
|
/// @param value: specifies the value to be written to the selected bit.
|
|
/// This parameter can be one of the BitAction enum values:
|
|
/// @arg Bit_RESET: to clear the port pin
|
|
/// @arg Bit_SET: to set the port pin
|
|
/// @retval None.
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
void GPIO_WriteBit(GPIO_TypeDef* gpio, u16 pin, BitAction value)
|
|
{
|
|
(value) ? (gpio->BSRR = pin) : (gpio->BRR = pin);
|
|
}
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @brief Writes data to all GPIO port pins.
|
|
/// @param gpio: where x can be (A..D) to select the GPIO peripheral.
|
|
/// @param value: specifies the value to be written to the port output data
|
|
/// register.
|
|
/// @retval None.
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
void GPIO_Write(GPIO_TypeDef* gpio, u16 value)
|
|
{
|
|
gpio->ODR = value;
|
|
}
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @brief Locks GPIO Pins configuration.
|
|
/// @param gpio: to select the GPIO peripheral.
|
|
/// @param pin: specifies the port bit to be written.
|
|
/// This parameter can be any combination of GPIO_Pin_x where x can be
|
|
/// (0..15).
|
|
/// @param state: new lock state of the port pin.
|
|
/// This parameter can be: ENABLE or DISABLE.
|
|
/// @retval None.
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
void GPIO_PinLock(GPIO_TypeDef* gpio, u16 pin, FunctionalState state)
|
|
{
|
|
(state) ? (gpio->LCKR |= pin) : (gpio->LCKR &= ~pin);
|
|
}
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @brief Locks GPIO Pins configuration registers until next system reset.
|
|
/// @param gpio: to select the GPIO peripheral.
|
|
/// @param pin: specifies the port bit to be written.
|
|
/// This parameter can be any combination of GPIO_Pin_x where x can be
|
|
/// (0..15).
|
|
/// @retval None.
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
void GPIO_PinLockConfig(GPIO_TypeDef* gpio, u16 pin)
|
|
{
|
|
gpio->LCKR = GPIO_LCKR_LCKK | pin;
|
|
gpio->LCKR = pin;
|
|
gpio->LCKR = GPIO_LCKR_LCKK | pin;
|
|
gpio->LCKR;
|
|
gpio->LCKR;
|
|
}
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @brief Enables or disables the port pin remapping.
|
|
/// @param remap: selects the pin to remap.
|
|
/// @param mask: the corresponding remapping mask of the remapping pin.
|
|
/// @param state: new state of the port pin remapping.
|
|
/// This parameter can be: ENABLE or DISABLE.
|
|
/// @retval None.
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @brief Writes data to the specified GPIO data port.
|
|
/// @param gpio: select the GPIO peripheral.
|
|
/// @param pin: specifies the pin for the Alternate function.
|
|
/// This parameter can be GPIO_PinSourcex where x can be (0..15) for
|
|
/// GPIOA, GPIOB, GPIOD and (0..12) for GPIOC .
|
|
/// @param alternate_function: selects the pin to used as Alternate function.
|
|
/// This parameter can be the GPIO_AF_x where x can be (0..7).
|
|
/// @note The pin should be used for Digital IP.
|
|
/// @retval None.
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
void GPIO_PinAFConfig(GPIO_TypeDef* gpio, u8 pin, u8 alternate_function)
|
|
{
|
|
u8 shift = (pin & 0x07) * 4;
|
|
u32* ptr = (pin < 8) ? (u32*)&gpio->AFRL : (u32*)&gpio->AFRH;
|
|
*ptr = (*ptr & ~(0x0F << shift)) | (alternate_function << shift);
|
|
}
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @brief Set the remap function and AF function of the GPIO pin.
|
|
/// @param gpio:select the GPIO peripheral.
|
|
/// @param pin: specifies the pin for the Alternate function.
|
|
/// This parameter can be GPIO_Pin_x where x can be (0..15) for
|
|
/// GPIOA, GPIOB, GPIOD and (0..12) for GPIOC .
|
|
/// @param remap: selects the pin to remap.
|
|
/// @param alternate_function: selects the pin to used as Alternate function.
|
|
/// This parameter can be the GPIO_AF_x where x can be (0..7).
|
|
/// @note The pin should be used for Digital IP.
|
|
/// @retval None.
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
void exGPIO_PinAFConfig(GPIO_TypeDef* gpio, u16 pin, s32 remap, s8 alternate_function)
|
|
{
|
|
u8 i;
|
|
u8 shift;
|
|
u32* ptr;
|
|
|
|
if (alternate_function >= 0) {
|
|
for (i = 0; i < 32; i++) {
|
|
if (pin & 0x01) {
|
|
pin = i;
|
|
break;
|
|
}
|
|
pin >>= 1;
|
|
}
|
|
|
|
shift = (pin & 0x07) * 4;
|
|
ptr = (pin < 8) ? (u32*)&gpio->AFRL : (u32*)&gpio->AFRH;
|
|
*ptr = (*ptr & ~(0x0F << shift)) | (alternate_function << shift);
|
|
}
|
|
}
|
|
|
|
|
|
/// @}
|
|
|
|
/// @}
|
|
|
|
/// @}
|
|
|