305 lines
12 KiB
C
305 lines
12 KiB
C
/*
|
|
* Copyright (c) 2006-2021, RT-Thread Development Team
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*
|
|
* Change Logs:
|
|
* Date Author Notes
|
|
* 2017-08-08 Yang the first version
|
|
*/
|
|
|
|
#include <rtthread.h>
|
|
#include <rtdevice.h>
|
|
#include "board.h"
|
|
#include "fsl_iocon.h"
|
|
#include "fsl_gpio.h"
|
|
#include "fsl_i2c.h"
|
|
|
|
#ifdef RT_USING_I2C
|
|
|
|
#ifdef RT_USING_I2C_BITOPS
|
|
|
|
struct lpc_i2c_bit_data
|
|
{
|
|
struct
|
|
{
|
|
GPIO_Type *base;
|
|
uint32_t port;
|
|
uint32_t pin;
|
|
} scl, sda;
|
|
};
|
|
|
|
static void gpio_set_sda(void *data, rt_int32_t state)
|
|
{
|
|
struct lpc_i2c_bit_data *bd = data;
|
|
|
|
if (state)
|
|
{
|
|
//bd->sda.base->B[bd->sda.port][bd->sda.pin] = 1;
|
|
GPIO_WritePinOutput(bd->sda.base, bd->sda.port, bd->sda.pin, 1);
|
|
}
|
|
else
|
|
{
|
|
GPIO_WritePinOutput(bd->sda.base, bd->sda.port, bd->sda.pin, 0);
|
|
}
|
|
}
|
|
|
|
static void gpio_set_scl(void *data, rt_int32_t state)
|
|
{
|
|
struct lpc_i2c_bit_data *bd = data;
|
|
|
|
if (state)
|
|
{
|
|
//bd->scl.base->B[bd->sda.port][bd->sda.pin] = 1;
|
|
GPIO_WritePinOutput(bd->scl.base, bd->scl.port, bd->scl.pin, 1);
|
|
}
|
|
else
|
|
{
|
|
//bd->scl.base->B[bd->sda.port][bd->sda.pin] = 0;
|
|
GPIO_WritePinOutput(bd->scl.base, bd->scl.port, bd->scl.pin, 0);
|
|
}
|
|
}
|
|
|
|
static rt_int32_t gpio_get_sda(void *data)
|
|
{
|
|
struct lpc_i2c_bit_data *bd = data;
|
|
|
|
return GPIO_ReadPinInput(bd->sda.base, bd->sda.port, bd->sda.pin) & 0x01;
|
|
}
|
|
|
|
static rt_int32_t gpio_get_scl(void *data)
|
|
{
|
|
struct lpc_i2c_bit_data *bd = data;
|
|
|
|
return GPIO_ReadPinInput(bd->scl.base, bd->scl.port, bd->scl.pin) & 0x01;
|
|
}
|
|
|
|
static void gpio_udelay(rt_uint32_t us)
|
|
{
|
|
volatile rt_int32_t i;
|
|
for (; us > 0; us--)
|
|
{
|
|
i = 10;
|
|
while (i--);
|
|
}
|
|
}
|
|
|
|
#else /* RT_USING_I2C_BITOPS */
|
|
|
|
#define IOCON_PIO_DIGITAL_EN 0x0100u /*!< Enables digital function */
|
|
#define IOCON_PIO_FUNC0 0x00u /*!< Selects pin function 0 */
|
|
#define IOCON_PIO_FUNC1 0x01u /*!< Selects pin function 1 */
|
|
#define IOCON_PIO_FUNC6 0x06u /*!< Selects pin function 6 */
|
|
#define IOCON_PIO_I2CDRIVE_HIGH 0x0400u /*!< High drive: 20 mA */
|
|
#define IOCON_PIO_I2CFILTER_EN 0x00u /*!< I2C 50 ns glitch filter enabled */
|
|
#define IOCON_PIO_I2CSLEW_I2C 0x00u /*!< I2C mode */
|
|
#define IOCON_PIO_INPFILT_OFF 0x0200u /*!< Input filter disabled */
|
|
#define IOCON_PIO_INV_DI 0x00u /*!< Input function is not inverted */
|
|
#define IOCON_PIO_MODE_INACT 0x00u /*!< No addition pin function */
|
|
#define IOCON_PIO_MODE_PULLUP 0x20u /*!< Selects pull-up function */
|
|
#define IOCON_PIO_OPENDRAIN_DI 0x00u /*!< Open drain is disabled */
|
|
#define IOCON_PIO_SLEW_FAST 0x0400u /*!< Fast mode, slew rate control is disabled */
|
|
#define IOCON_PIO_SLEW_STANDARD 0x00u /*!< Standard mode, output slew rate control is enabled */
|
|
#define PIN0_IDX 0u /*!< Pin number for pin 0 in a port 3 */
|
|
#define PIN1_IDX 1u /*!< Pin number for pin 1 in a port 3 */
|
|
#define PIN2_IDX 2u /*!< Pin number for pin 2 in a port 0 */
|
|
#define PIN3_IDX 3u /*!< Pin number for pin 3 in a port 0 */
|
|
#define PIN4_IDX 4u /*!< Pin number for pin 4 in a port 0 */
|
|
#define PIN5_IDX 5u /*!< Pin number for pin 5 in a port 0 */
|
|
#define PIN6_IDX 6u /*!< Pin number for pin 6 in a port 0 */
|
|
#define PIN7_IDX 7u /*!< Pin number for pin 7 in a port 0 */
|
|
#define PIN8_IDX 8u /*!< Pin number for pin 8 in a port 0 */
|
|
#define PIN9_IDX 9u /*!< Pin number for pin 9 in a port 0 */
|
|
#define PIN10_IDX 10u /*!< Pin number for pin 10 in a port 1 */
|
|
#define PIN11_IDX 11u /*!< Pin number for pin 11 in a port 1 */
|
|
#define PIN12_IDX 12u /*!< Pin number for pin 12 in a port 1 */
|
|
#define PIN13_IDX 13u /*!< Pin number for pin 13 in a port 1 */
|
|
#define PIN14_IDX 14u /*!< Pin number for pin 14 in a port 1 */
|
|
#define PIN15_IDX 15u /*!< Pin number for pin 15 in a port 0 */
|
|
#define PIN16_IDX 16u /*!< Pin number for pin 16 in a port 1 */
|
|
#define PIN18_IDX 18u /*!< Pin number for pin 18 in a port 0 */
|
|
#define PIN19_IDX 19u /*!< Pin number for pin 19 in a port 0 */
|
|
#define PIN20_IDX 20u /*!< Pin number for pin 20 in a port 0 */
|
|
#define PIN21_IDX 21u /*!< Pin number for pin 21 in a port 0 */
|
|
#define PIN22_IDX 22u /*!< Pin number for pin 22 in a port 2 */
|
|
#define PIN23_IDX 23u /*!< Pin number for pin 23 in a port 1 */
|
|
#define PIN24_IDX 24u /*!< Pin number for pin 24 in a port 1 */
|
|
#define PIN25_IDX 25u /*!< Pin number for pin 25 in a port 1 */
|
|
#define PIN26_IDX 26u /*!< Pin number for pin 26 in a port 1 */
|
|
#define PIN27_IDX 27u /*!< Pin number for pin 27 in a port 1 */
|
|
#define PIN28_IDX 28u /*!< Pin number for pin 28 in a port 1 */
|
|
#define PIN29_IDX 29u /*!< Pin number for pin 29 in a port 0 */
|
|
#define PIN30_IDX 30u /*!< Pin number for pin 30 in a port 0 */
|
|
#define PIN31_IDX 31u /*!< Pin number for pin 31 in a port 1 */
|
|
#define PORT0_IDX 0u /*!< Port index */
|
|
#define PORT1_IDX 1u /*!< Port index */
|
|
#define PORT2_IDX 2u /*!< Port index */
|
|
#define PORT3_IDX 3u /*!< Port index */
|
|
|
|
|
|
struct lpc_i2c_bus
|
|
{
|
|
struct rt_i2c_bus_device parent;
|
|
I2C_Type *I2C;
|
|
};
|
|
|
|
static rt_size_t lpc_i2c_xfer(struct rt_i2c_bus_device *bus,
|
|
struct rt_i2c_msg msgs[], rt_uint32_t num)
|
|
{
|
|
struct rt_i2c_msg *msg;
|
|
i2c_master_transfer_t xfer = {0};
|
|
rt_uint32_t i;
|
|
rt_err_t ret = RT_ERROR;
|
|
|
|
struct lpc_i2c_bus *lpc_i2c = (struct lpc_i2c_bus *)bus;
|
|
|
|
for (i = 0; i < num; i++)
|
|
{
|
|
msg = &msgs[i];
|
|
|
|
if (msg->flags & RT_I2C_RD)
|
|
{
|
|
xfer.slaveAddress = msg->addr;
|
|
xfer.direction = kI2C_Read;
|
|
xfer.subaddress = 1;
|
|
xfer.subaddressSize = 1;
|
|
xfer.data = msg->buf;
|
|
xfer.dataSize = msg->len;
|
|
xfer.flags = kI2C_TransferDefaultFlag;
|
|
|
|
if (I2C_MasterTransferBlocking(lpc_i2c->I2C, &xfer) != kStatus_Success)
|
|
{
|
|
i2c_dbg("i2c bus write failed,i2c bus stop!\n");
|
|
goto out;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
xfer.slaveAddress = msg->addr;
|
|
xfer.direction = kI2C_Write;
|
|
xfer.subaddress = 0;
|
|
xfer.subaddressSize = 1;
|
|
xfer.data = msg->buf;
|
|
xfer.dataSize = msg->len;
|
|
xfer.flags = kI2C_TransferDefaultFlag;
|
|
|
|
if (I2C_MasterTransferBlocking(lpc_i2c->I2C, &xfer) != kStatus_Success)
|
|
{
|
|
i2c_dbg("i2c bus write failed,i2c bus stop!\n");
|
|
goto out;
|
|
}
|
|
}
|
|
}
|
|
ret = i;
|
|
|
|
out:
|
|
i2c_dbg("send stop condition\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct rt_i2c_bus_device_ops i2c_ops =
|
|
{
|
|
lpc_i2c_xfer,
|
|
RT_NULL,
|
|
RT_NULL
|
|
};
|
|
|
|
#endif /* RT_USING_I2C_BITOPS */
|
|
|
|
int rt_hw_i2c_init(void)
|
|
{
|
|
#ifdef RT_USING_I2C_BITOPS
|
|
/* register I2C1: SCL/P0_20 SDA/P0_19 */
|
|
{
|
|
static struct rt_i2c_bus_device i2c_device;
|
|
|
|
static const struct lpc_i2c_bit_data _i2c_bdata =
|
|
{
|
|
/* SCL */ {GPIO, 3, 24},
|
|
/* SDA */ {GPIO, 3, 23},
|
|
};
|
|
|
|
static const struct rt_i2c_bit_ops _i2c_bit_ops =
|
|
{
|
|
(void*)&_i2c_bdata,
|
|
gpio_set_sda,
|
|
gpio_set_scl,
|
|
gpio_get_sda,
|
|
gpio_get_scl,
|
|
|
|
gpio_udelay,
|
|
|
|
5,
|
|
100
|
|
};
|
|
|
|
gpio_pin_config_t pin_config = {
|
|
kGPIO_DigitalOutput, 0,
|
|
};
|
|
|
|
CLOCK_EnableClock(kCLOCK_Gpio3);
|
|
|
|
/* Enable touch panel controller */
|
|
GPIO_PinInit(GPIO, _i2c_bdata.sda.port, _i2c_bdata.sda.pin, &pin_config);
|
|
GPIO_PinInit(GPIO, _i2c_bdata.scl.port, _i2c_bdata.scl.pin, &pin_config);
|
|
|
|
GPIO_WritePinOutput(GPIO, _i2c_bdata.sda.port, _i2c_bdata.sda.pin, 1);
|
|
GPIO_WritePinOutput(GPIO, _i2c_bdata.scl.port, _i2c_bdata.scl.pin, 1);
|
|
|
|
i2c_device.priv = (void *)&_i2c_bit_ops;
|
|
rt_i2c_bit_add_bus(&i2c_device, "i2c2");
|
|
} /* register I2C */
|
|
|
|
#else /* RT_USING_I2C_BITOPS */
|
|
static struct lpc_i2c_bus lpc_i2c2;
|
|
|
|
/* attach 12 MHz clock to FLEXCOMM2 (I2C master for touch controller) */
|
|
CLOCK_AttachClk(kFRO12M_to_FLEXCOMM2);
|
|
|
|
const uint32_t port3_pin23_config = (
|
|
IOCON_PIO_FUNC1 | /* Pin is configured as FC2_CTS_SDA_SSEL0 */
|
|
IOCON_PIO_I2CSLEW_I2C | /* I2C mode */
|
|
IOCON_PIO_INV_DI | /* Input function is not inverted */
|
|
IOCON_PIO_DIGITAL_EN | /* Enables digital function */
|
|
IOCON_PIO_INPFILT_OFF | /* Input filter disabled */
|
|
IOCON_PIO_I2CDRIVE_HIGH | /* High drive: 20 mA */
|
|
IOCON_PIO_I2CFILTER_EN /* I2C 50 ns glitch filter enabled */
|
|
);
|
|
IOCON_PinMuxSet(IOCON, PORT3_IDX, PIN23_IDX, port3_pin23_config); /* PORT3 PIN23 (coords: C2) is configured as FC2_CTS_SDA_SSEL0 */
|
|
const uint32_t port3_pin24_config = (
|
|
IOCON_PIO_FUNC1 | /* Pin is configured as FC2_RTS_SCL_SSEL1 */
|
|
IOCON_PIO_I2CSLEW_I2C | /* I2C mode */
|
|
IOCON_PIO_INV_DI | /* Input function is not inverted */
|
|
IOCON_PIO_DIGITAL_EN | /* Enables digital function */
|
|
IOCON_PIO_INPFILT_OFF | /* Input filter disabled */
|
|
IOCON_PIO_I2CDRIVE_HIGH | /* High drive: 20 mA */
|
|
IOCON_PIO_I2CFILTER_EN /* I2C 50 ns glitch filter enabled */
|
|
);
|
|
IOCON_PinMuxSet(IOCON, PORT3_IDX, PIN24_IDX, port3_pin24_config); /* PORT3 PIN24 (coords: E2) is configured as FC2_RTS_SCL_SSEL1 */
|
|
|
|
{
|
|
i2c_master_config_t masterConfig;
|
|
|
|
I2C_MasterGetDefaultConfig(&masterConfig);
|
|
|
|
/* Change the default baudrate configuration */
|
|
masterConfig.baudRate_Bps = 100000U;
|
|
|
|
/* Initialize the I2C master peripheral */
|
|
I2C_MasterInit(I2C2, &masterConfig, 12000000);
|
|
}
|
|
|
|
rt_memset((void *)&lpc_i2c2, 0, sizeof(struct lpc_i2c_bus));
|
|
lpc_i2c2.parent.ops = &i2c_ops;
|
|
lpc_i2c2.I2C = I2C2;
|
|
rt_i2c_bus_device_register(&lpc_i2c2.parent, "i2c2");
|
|
|
|
#endif /* RT_USING_I2C_BITOPS */
|
|
|
|
return 0;
|
|
}
|
|
INIT_DEVICE_EXPORT(rt_hw_i2c_init);
|
|
|
|
#endif /* RT_USING_I2C */
|