libs/rt-thread
libs
/
rt-thread
4
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
rt-thread/bsp/lpc43xx/drivers/drv_emac.c

537 lines
14 KiB
C
Raw Blame History

/*
* File : drv_emac.c
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2009-2013 RT-Thread Develop Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2013-05-19 Bernard porting from LPC17xx drivers.
*/
#include <rtthread.h>
#include "lwipopts.h"
#include <netif/ethernetif.h>
#include "lpc_iap.h"
#include "drv_emac.h"
#define EMAC_PHY_AUTO 0
#define EMAC_PHY_10MBIT 1
#define EMAC_PHY_100MBIT 2
#define MAX_ADDR_LEN 6
static rt_uint32_t ETH_RAM_BASE[4 * 1024] SECTION("ETH_RAM");
/* EMAC variables located in 16K Ethernet SRAM */
#define RX_DESC_BASE (uint32_t)&ETH_RAM_BASE[0]
#define RX_STAT_BASE (RX_DESC_BASE + NUM_RX_FRAG*8)
#define TX_DESC_BASE (RX_STAT_BASE + NUM_RX_FRAG*8)
#define TX_STAT_BASE (TX_DESC_BASE + NUM_TX_FRAG*8)
#define RX_BUF_BASE (TX_STAT_BASE + NUM_TX_FRAG*4)
#define TX_BUF_BASE (RX_BUF_BASE + NUM_RX_FRAG*ETH_FRAG_SIZE)
/* RX and TX descriptor and status definitions. */
#define RX_DESC_PACKET(i) (*(unsigned int *)(RX_DESC_BASE + 8*i))
#define RX_DESC_CTRL(i) (*(unsigned int *)(RX_DESC_BASE+4 + 8*i))
#define RX_STAT_INFO(i) (*(unsigned int *)(RX_STAT_BASE + 8*i))
#define RX_STAT_HASHCRC(i) (*(unsigned int *)(RX_STAT_BASE+4 + 8*i))
#define TX_DESC_PACKET(i) (*(unsigned int *)(TX_DESC_BASE + 8*i))
#define TX_DESC_CTRL(i) (*(unsigned int *)(TX_DESC_BASE+4 + 8*i))
#define TX_STAT_INFO(i) (*(unsigned int *)(TX_STAT_BASE + 4*i))
#define RX_BUF(i) (RX_BUF_BASE + ETH_FRAG_SIZE*i)
#define TX_BUF(i) (TX_BUF_BASE + ETH_FRAG_SIZE*i)
struct lpc_emac
{
/* inherit from ethernet device */
struct eth_device parent;
rt_uint8_t phy_mode;
/* interface address info. */
rt_uint8_t dev_addr[MAX_ADDR_LEN]; /* hw address */
};
static struct lpc_emac lpc_emac_device;
static struct rt_semaphore sem_lock;
static struct rt_event tx_event;
/* Local Function Prototypes */
static void write_PHY(rt_uint32_t PhyReg, rt_uint32_t Value);
static rt_uint16_t read_PHY(rt_uint8_t PhyReg) ;
void ENET_IRQHandler(void)
{
rt_uint32_t status;
/* enter interrupt */
rt_interrupt_enter();
status = LPC_EMAC->IntStatus;
if (status & INT_RX_DONE)
{
/* Disable EMAC RxDone interrupts. */
LPC_EMAC->IntEnable = INT_TX_DONE;
/* a frame has been received */
eth_device_ready(&(lpc_emac_device.parent));
}
else if (status & INT_TX_DONE)
{
/* set event */
rt_event_send(&tx_event, 0x01);
}
if (status & INT_RX_OVERRUN)
{
rt_kprintf("rx overrun\n");
}
if (status & INT_TX_UNDERRUN)
{
rt_kprintf("tx underrun\n");
}
/* Clear the interrupt. */
LPC_EMAC->IntClear = status;
/* leave interrupt */
rt_interrupt_leave();
}
/* phy write */
static void write_PHY(rt_uint32_t PhyReg, rt_uint32_t Value)
{
unsigned int tout;
LPC_EMAC->MADR = DP83848C_DEF_ADR | PhyReg;
LPC_EMAC->MWTD = Value;
/* Wait utill operation completed */
tout = 0;
for (tout = 0; tout < MII_WR_TOUT; tout++)
{
if ((LPC_EMAC->MIND & MIND_BUSY) == 0)
{
break;
}
}
}
/* phy read */
static rt_uint16_t read_PHY(rt_uint8_t PhyReg)
{
rt_uint32_t tout;
LPC_EMAC->MADR = DP83848C_DEF_ADR | PhyReg;
LPC_EMAC->MCMD = MCMD_READ;
/* Wait until operation completed */
tout = 0;
for (tout = 0; tout < MII_RD_TOUT; tout++)
{
if ((LPC_EMAC->MIND & MIND_BUSY) == 0)
{
break;
}
}
LPC_EMAC->MCMD = 0;
return (LPC_EMAC->MRDD);
}
/* init rx descriptor */
rt_inline void rx_descr_init(void)
{
rt_uint32_t i;
for (i = 0; i < NUM_RX_FRAG; i++)
{
RX_DESC_PACKET(i) = RX_BUF(i);
RX_DESC_CTRL(i) = RCTRL_INT | (ETH_FRAG_SIZE - 1);
RX_STAT_INFO(i) = 0;
RX_STAT_HASHCRC(i) = 0;
}
/* Set EMAC Receive Descriptor Registers. */
LPC_EMAC->RxDescriptor = RX_DESC_BASE;
LPC_EMAC->RxStatus = RX_STAT_BASE;
LPC_EMAC->RxDescriptorNumber = NUM_RX_FRAG - 1;
/* Rx Descriptors Point to 0 */
LPC_EMAC->RxConsumeIndex = 0;
}
/* init tx descriptor */
rt_inline void tx_descr_init(void)
{
rt_uint32_t i;
for (i = 0; i < NUM_TX_FRAG; i++)
{
TX_DESC_PACKET(i) = TX_BUF(i);
TX_DESC_CTRL(i) = (1ul << 31) | (1ul << 30) | (1ul << 29) | (1ul << 28) | (1ul << 26) | (ETH_FRAG_SIZE - 1);
TX_STAT_INFO(i) = 0;
}
/* Set EMAC Transmit Descriptor Registers. */
LPC_EMAC->TxDescriptor = TX_DESC_BASE;
LPC_EMAC->TxStatus = TX_STAT_BASE;
LPC_EMAC->TxDescriptorNumber = NUM_TX_FRAG - 1;
/* Tx Descriptors Point to 0 */
LPC_EMAC->TxProduceIndex = 0;
}
/*
TX_EN P1_4
TXD0 P1_0
TXD1 P1_1
RXD0 P1_9
RXD1 P1_10
RX_ER P1_14
CRS_DV P1_8
MDC P1_16
MDIO P1_17
REF_CLK P1_15
*/
static rt_err_t lpc_emac_init(rt_device_t dev)
{
/* Initialize the EMAC ethernet controller. */
rt_uint32_t regv, tout;
/* Power Up the EMAC controller. */
LPC_SC->PCONP |= (1UL << 30);
/* Enable P1 Ethernet Pins. */
/**< P1_0 ENET_TXD0 */
LPC_IOCON->P1_0 &= ~(0x07);
LPC_IOCON->P1_0 |= 0x01;
/**< P1_1 ENET_TXD1 */
LPC_IOCON->P1_1 &= ~(0x07);
LPC_IOCON->P1_1 |= 0x01;
/**< P1_4 ENET_TX_EN */
LPC_IOCON->P1_4 &= ~(0x07);
LPC_IOCON->P1_4 |= 0x01;
/**< P1_8 ENET_CRS_DV */
LPC_IOCON->P1_8 &= ~(0x07);
LPC_IOCON->P1_8 |= 0x01;
/**< P1_9 ENET_RXD0 */
LPC_IOCON->P1_9 &= ~(0x07);
LPC_IOCON->P1_9 |= 0x01;
/**< P1_10 ENET_RXD1 */
LPC_IOCON->P1_10 &= ~(0x07);
LPC_IOCON->P1_10 |= 0x01;
/**< P1_14 ENET_RX_ER */
LPC_IOCON->P1_14 &= ~(0x07);
LPC_IOCON->P1_14 |= 0x01;
/**< P1_15 ENET_REF_CLK */
LPC_IOCON->P1_15 &= ~(0x07);
LPC_IOCON->P1_15 |= 0x01;
/**< P1_16 ENET_MDC */
LPC_IOCON->P1_16 &= ~(0x07);
LPC_IOCON->P1_16 |= 0x01;
/**< P1_17 ENET_MDIO */
LPC_IOCON->P1_17 &= ~(0x07);
LPC_IOCON->P1_17 |= 0x01;
/* Reset all EMAC internal modules. */
LPC_EMAC->MAC1 = MAC1_RES_TX | MAC1_RES_MCS_TX | MAC1_RES_RX | MAC1_RES_MCS_RX |
MAC1_SIM_RES | MAC1_SOFT_RES;
LPC_EMAC->Command = CR_REG_RES | CR_TX_RES | CR_RX_RES;
/* A short delay after reset. */
for (tout = 100; tout; tout--);
/* Initialize MAC control registers. */
LPC_EMAC->MAC1 = MAC1_PASS_ALL;
LPC_EMAC->MAC2 = MAC2_CRC_EN | MAC2_PAD_EN;
LPC_EMAC->MAXF = ETH_MAX_FLEN;
LPC_EMAC->CLRT = CLRT_DEF;
LPC_EMAC->IPGR = IPGR_DEF;
/* PCLK=18MHz, clock select=6, MDC=18/6=3MHz */
/* Enable Reduced MII interface. */
LPC_EMAC->MCFG = MCFG_CLK_DIV20 | MCFG_RES_MII;
for (tout = 100; tout; tout--);
LPC_EMAC->MCFG = MCFG_CLK_DIV20;
/* Enable Reduced MII interface. */
LPC_EMAC->Command = CR_RMII | CR_PASS_RUNT_FRM | CR_PASS_RX_FILT;
/* Reset Reduced MII Logic. */
LPC_EMAC->SUPP = SUPP_RES_RMII | SUPP_SPEED;
for (tout = 100; tout; tout--);
LPC_EMAC->SUPP = SUPP_SPEED;
/* Put the PHY in reset mode */
write_PHY(PHY_REG_BMCR, 0x8000);
for (tout = 1000; tout; tout--);
/* Configure the PHY device */
/* Configure the PHY device */
switch (lpc_emac_device.phy_mode)
{
case EMAC_PHY_AUTO:
/* Use autonegotiation about the link speed. */
write_PHY(PHY_REG_BMCR, PHY_AUTO_NEG);
break;
case EMAC_PHY_10MBIT:
/* Connect at 10MBit */
write_PHY(PHY_REG_BMCR, PHY_FULLD_10M);
break;
case EMAC_PHY_100MBIT:
/* Connect at 100MBit */
write_PHY(PHY_REG_BMCR, PHY_FULLD_100M);
break;
}
if (tout >= 0x100000) return -RT_ERROR; // auto_neg failed
regv = 0x0004;
/* Configure Full/Half Duplex mode. */
if (regv & 0x0004)
{
/* Full duplex is enabled. */
LPC_EMAC->MAC2 |= MAC2_FULL_DUP;
LPC_EMAC->Command |= CR_FULL_DUP;
LPC_EMAC->IPGT = IPGT_FULL_DUP;
}
else
{
/* Half duplex mode. */
LPC_EMAC->IPGT = IPGT_HALF_DUP;
}
/* Configure 100MBit/10MBit mode. */
if (regv & 0x0002)
{
/* 10MBit mode. */
LPC_EMAC->SUPP = 0;
}
else
{
/* 100MBit mode. */
LPC_EMAC->SUPP = SUPP_SPEED;
}
/* Set the Ethernet MAC Address registers */
LPC_EMAC->SA0 = (lpc_emac_device.dev_addr[1] << 8) | lpc_emac_device.dev_addr[0];
LPC_EMAC->SA1 = (lpc_emac_device.dev_addr[3] << 8) | lpc_emac_device.dev_addr[2];
LPC_EMAC->SA2 = (lpc_emac_device.dev_addr[5] << 8) | lpc_emac_device.dev_addr[4];
/* Initialize Tx and Rx DMA Descriptors */
rx_descr_init();
tx_descr_init();
/* Receive Broadcast and Perfect Match Packets */
LPC_EMAC->RxFilterCtrl = RFC_BCAST_EN | RFC_PERFECT_EN;
/* Reset all interrupts */
LPC_EMAC->IntClear = 0xFFFF;
/* Enable EMAC interrupts. */
LPC_EMAC->IntEnable = INT_RX_DONE | INT_TX_DONE;
/* Enable receive and transmit mode of MAC Ethernet core */
LPC_EMAC->Command |= (CR_RX_EN | CR_TX_EN);
LPC_EMAC->MAC1 |= MAC1_REC_EN;
/* Enable the ENET Interrupt */
NVIC_EnableIRQ(ENET_IRQn);
return RT_EOK;
}
static rt_err_t lpc_emac_open(rt_device_t dev, rt_uint16_t oflag)
{
return RT_EOK;
}
static rt_err_t lpc_emac_close(rt_device_t dev)
{
return RT_EOK;
}
static rt_size_t lpc_emac_read(rt_device_t dev, rt_off_t pos, void *buffer, rt_size_t size)
{
rt_set_errno(-RT_ENOSYS);
return 0;
}
static rt_size_t lpc_emac_write(rt_device_t dev, rt_off_t pos, const void *buffer, rt_size_t size)
{
rt_set_errno(-RT_ENOSYS);
return 0;
}
static rt_err_t lpc_emac_control(rt_device_t dev, int cmd, void *args)
{
switch (cmd)
{
case NIOCTL_GADDR:
/* get mac address */
if (args) rt_memcpy(args, lpc_emac_device.dev_addr, 6);
else return -RT_ERROR;
break;
default :
break;
}
return RT_EOK;
}
/* EtherNet Device Interface */
/* transmit packet. */
rt_err_t lpc_emac_tx(rt_device_t dev, struct pbuf *p)
{
rt_uint32_t Index, IndexNext;
rt_uint8_t *ptr;
/* calculate next index */
IndexNext = LPC_EMAC->TxProduceIndex + 1;
if (IndexNext > LPC_EMAC->TxDescriptorNumber) IndexNext = 0;
/* check whether block is full */
while (IndexNext == LPC_EMAC->TxConsumeIndex)
{
rt_err_t result;
rt_uint32_t recved;
/* there is no block yet, wait a flag */
result = rt_event_recv(&tx_event, 0x01,
RT_EVENT_FLAG_AND | RT_EVENT_FLAG_CLEAR, RT_WAITING_FOREVER, &recved);
RT_ASSERT(result == RT_EOK);
}
/* lock EMAC device */
rt_sem_take(&sem_lock, RT_WAITING_FOREVER);
/* get produce index */
Index = LPC_EMAC->TxProduceIndex;
/* calculate next index */
IndexNext = LPC_EMAC->TxProduceIndex + 1;
if (IndexNext > LPC_EMAC->TxDescriptorNumber)
IndexNext = 0;
/* copy data to tx buffer */
ptr = (rt_uint8_t *)TX_BUF(Index);
pbuf_copy_partial(p, ptr, p->tot_len, 0);
TX_DESC_CTRL(Index) &= ~0x7ff;
TX_DESC_CTRL(Index) |= (p->tot_len - 1) & 0x7ff;
/* change index to the next */
LPC_EMAC->TxProduceIndex = IndexNext;
/* unlock EMAC device */
rt_sem_release(&sem_lock);
return RT_EOK;
}
/* reception packet. */
struct pbuf *lpc_emac_rx(rt_device_t dev)
{
struct pbuf *p;
rt_uint32_t size;
rt_uint32_t Index;
/* init p pointer */
p = RT_NULL;
/* lock EMAC device */
rt_sem_take(&sem_lock, RT_WAITING_FOREVER);
Index = LPC_EMAC->RxConsumeIndex;
if (Index != LPC_EMAC->RxProduceIndex)
{
size = (RX_STAT_INFO(Index) & 0x7ff) + 1;
if (size > ETH_FRAG_SIZE) size = ETH_FRAG_SIZE;
/* allocate buffer */
p = pbuf_alloc(PBUF_LINK, size, PBUF_RAM);
if (p != RT_NULL)
{
pbuf_take(p, (rt_uint8_t *)RX_BUF(Index), size);
}
/* move Index to the next */
if (++Index > LPC_EMAC->RxDescriptorNumber)
Index = 0;
/* set consume index */
LPC_EMAC->RxConsumeIndex = Index;
}
else
{
/* Enable RxDone interrupt */
LPC_EMAC->IntEnable = INT_RX_DONE | INT_TX_DONE;
}
/* unlock EMAC device */
rt_sem_release(&sem_lock);
return p;
}
int lpc_emac_hw_init(void)
{
uint32_t result[4];
rt_event_init(&tx_event, "tx_event", RT_IPC_FLAG_FIFO);
rt_sem_init(&sem_lock, "eth_lock", 1, RT_IPC_FLAG_FIFO);
/* set autonegotiation mode */
lpc_emac_device.phy_mode = EMAC_PHY_AUTO;
// OUI 00-60-37 NXP Semiconductors
lpc_emac_device.dev_addr[0] = 0x00;
lpc_emac_device.dev_addr[1] = 0x60;
lpc_emac_device.dev_addr[2] = 0x37;
/* set mac address: (only for test) */
ReadDeviceSerialNum(result);
lpc_emac_device.dev_addr[3] = result[0] ^ result[1];
lpc_emac_device.dev_addr[4] = result[1] ^ result[2];
lpc_emac_device.dev_addr[5] = result[2] ^ result[3];
lpc_emac_device.parent.parent.init = lpc_emac_init;
lpc_emac_device.parent.parent.open = lpc_emac_open;
lpc_emac_device.parent.parent.close = lpc_emac_close;
lpc_emac_device.parent.parent.read = lpc_emac_read;
lpc_emac_device.parent.parent.write = lpc_emac_write;
lpc_emac_device.parent.parent.control = lpc_emac_control;
lpc_emac_device.parent.parent.user_data = RT_NULL;
lpc_emac_device.parent.eth_rx = lpc_emac_rx;
lpc_emac_device.parent.eth_tx = lpc_emac_tx;
eth_device_init(&(lpc_emac_device.parent), "e0");
return 0;
}
INIT_DEVICE_EXPORT(lpc_emac_hw_init);
#ifdef RT_USING_FINSH
#include <finsh.h>
void emac_dump()
{
rt_kprintf("Command : %08x\n", LPC_EMAC->Command);
rt_kprintf("Status : %08x\n", LPC_EMAC->Status);
rt_kprintf("RxStatus : %08x\n", LPC_EMAC->RxStatus);
rt_kprintf("TxStatus : %08x\n", LPC_EMAC->TxStatus);
rt_kprintf("IntEnable: %08x\n", LPC_EMAC->IntEnable);
rt_kprintf("IntStatus: %08x\n", LPC_EMAC->IntStatus);
}
FINSH_FUNCTION_EXPORT(emac_dump, dump emac register);
#endif
View Git Blame Copy Permalink