libs/rt-thread
libs
/
rt-thread
4
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
rt-thread/bsp/nuvoton/libraries/m2354/StdDriver/inc/nu_scuart.h

354 lines
13 KiB
C
Raw Blame History

/**************************************************************************//**
* @file nu_scuart.h
* @version V3.00
* @brief Smartcard UART mode (SCUART) driver header file
*
* @copyright SPDX-License-Identifier: Apache-2.0
* @copyright Copyright (C) 2020 Nuvoton Technology Corp. All rights reserved.
*****************************************************************************/
#ifndef __NU_SCUART_H__
#define __NU_SCUART_H__
#ifdef __cplusplus
extern "C"
{
#endif
/** @addtogroup Standard_Driver Standard Driver
@{
*/
/** @addtogroup SCUART_Driver SCUART Driver
@{
*/
/** @addtogroup SCUART_EXPORTED_CONSTANTS SCUART Exported Constants
@{
*/
#define SCUART_CHAR_LEN_5 (0x3UL << SC_UARTCTL_WLS_Pos) /*!< Set SCUART word length to 5 bits \hideinitializer */
#define SCUART_CHAR_LEN_6 (0x2UL << SC_UARTCTL_WLS_Pos) /*!< Set SCUART word length to 6 bits \hideinitializer */
#define SCUART_CHAR_LEN_7 (0x1UL << SC_UARTCTL_WLS_Pos) /*!< Set SCUART word length to 7 bits \hideinitializer */
#define SCUART_CHAR_LEN_8 (0UL) /*!< Set SCUART word length to 8 bits \hideinitializer */
#define SCUART_PARITY_NONE (SC_UARTCTL_PBOFF_Msk) /*!< Set SCUART transfer with no parity \hideinitializer */
#define SCUART_PARITY_ODD (SC_UARTCTL_OPE_Msk) /*!< Set SCUART transfer with odd parity \hideinitializer */
#define SCUART_PARITY_EVEN (0UL) /*!< Set SCUART transfer with even parity \hideinitializer */
#define SCUART_STOP_BIT_1 (SC_CTL_NSB_Msk) /*!< Set SCUART transfer with one stop bit \hideinitializer */
#define SCUART_STOP_BIT_2 (0UL) /*!< Set SCUART transfer with two stop bits \hideinitializer */
/**@}*/ /* end of group SCUART_EXPORTED_CONSTANTS */
/** @addtogroup SCUART_EXPORTED_FUNCTIONS SCUART Exported Functions
@{
*/
/* TX Macros */
/**
* @brief Write Data to Tx data register
*
* @param[in] sc The pointer of smartcard module.
* @param[in] u8Data Data byte to transmit.
*
* @return None
*
* @details By writing data to DAT register, the SC will send out an 8-bit data.
* \hideinitializer
*/
#define SCUART_WRITE(sc, u8Data) ((sc)->DAT = (u8Data))
/**
* @brief Get Tx FIFO empty flag status from register
*
* @param[in] sc The pointer of smartcard module.
*
* @return Transmit FIFO empty status
* @retval 0 Transmit FIFO is not empty
* @retval SC_STATUS_TXEMPTY_Msk Transmit FIFO is empty
*
* @details When the last byte of Tx buffer has been transferred to Transmitter Shift Register, hardware sets TXEMPTY (SC_STATUS[9]) high.
* It will be cleared when writing data into DAT (SC_DAT[7:0]).
* \hideinitializer
*/
#define SCUART_GET_TX_EMPTY(sc) ((sc)->STATUS & SC_STATUS_TXEMPTY_Msk)
/**
* @brief Get Tx FIFO full flag status from register
*
* @param[in] sc The pointer of smartcard module.
*
* @return Transmit FIFO full status
* @retval 0 Transmit FIFO is not full
* @retval SC_STATUS_TXFULL_Msk Transmit FIFO is full
*
* @details TXFULL (SC_STATUS[10]) is set when Tx buffer counts equals to 4, otherwise is cleared by hardware.
* \hideinitializer
*/
#define SCUART_GET_TX_FULL(sc) ((sc)->STATUS & SC_STATUS_TXFULL_Msk)
/**
* @brief Wait specified smartcard port transmission complete
*
* @param[in] sc The pointer of smartcard module.
*
* @return None
*
* @details TXACT (SC_STATUS[31]) is cleared automatically when Tx transfer is finished or the last byte transmission has completed.
*
* @note This macro blocks until transmit complete.
* \hideinitializer
*/
#define SCUART_WAIT_TX_EMPTY(sc) while(((sc)->STATUS & SC_STATUS_TXACT_Msk) == SC_STATUS_TXACT_Msk)
/**
* @brief Check specified smartcard port transmit FIFO is full or not
*
* @param[in] sc The pointer of smartcard module.
*
* @return Transmit FIFO full status
* @retval 0 Transmit FIFO is not full
* @retval 1 Transmit FIFO is full
*
* @details TXFULL (SC_STATUS[10]) indicates Tx buffer full or not.
* This bit is set when Tx buffer counts equals to 4, otherwise is cleared by hardware.
* \hideinitializer
*/
#define SCUART_IS_TX_FULL(sc) (((sc)->STATUS & SC_STATUS_TXFULL_Msk)? 1 : 0)
/**
* @brief Check specified smartcard port transmission is over
*
* @param[in] sc The pointer of smartcard module.
*
* @return Transmit complete status
* @retval 0 Transmit is not complete
* @retval 1 Transmit complete
*
* @details TXACT (SC_STATUS[31]) indicates Tx Transmit is complete or not.
* \hideinitializer
*/
#define SCUART_IS_TX_EMPTY(sc) (((sc)->STATUS & SC_STATUS_TXACT_Msk)? 0 : 1)
/**
* @brief Check specified smartcard port transmit FIFO empty status
*
* @param[in] sc The pointer of smartcard module.
*
* @return Transmit FIFO empty status
* @retval 0 Transmit FIFO is not empty
* @retval 1 Transmit FIFO is empty
*
* @details TXEMPTY (SC_STATUS[9]) is set by hardware when the last byte of Tx buffer has been transferred to Transmitter Shift Register.
* \hideinitializer
*/
#define SCUART_IS_TX_FIFO_EMPTY(sc) (((sc)->STATUS & SC_STATUS_TXEMPTY_Msk)? 1 : 0)
/**
* @brief Check specified Smartcard port Transmission Status
*
* @param[in] sc The pointer of smartcard module.
*
* @retval 0 Transmit is completed
* @retval 1 Transmit is active
*
* @details TXACT (SC_STATUS[31]) is set by hardware when Tx transfer is in active and the STOP bit of the last byte has been transmitted.
* \hideinitializer
*/
#define SCUART_IS_TX_ACTIVE(sc) (((sc)->STATUS & SC_STATUS_TXACT_Msk)? 1 : 0)
/* RX Macros */
/**
* @brief Read Rx data register
*
* @param[in] sc The pointer of smartcard module.
*
* @return The oldest data byte in RX FIFO
*
* @details By reading DAT register, the SC will return an 8-bit received data.
* \hideinitializer
*/
#define SCUART_READ(sc) ((sc)->DAT)
/**
* @brief Get Rx FIFO empty flag status from register
*
* @param[in] sc The pointer of smartcard module.
*
* @return Receive FIFO empty status
* @retval 0 Receive FIFO is not empty
* @retval SC_STATUS_RXEMPTY_Msk Receive FIFO is empty
*
* @details When the last byte of Rx buffer has been read by CPU, hardware sets RXEMPTY (SC_STATUS[1]) high.
* It will be cleared when SC receives any new data.
* \hideinitializer
*/
#define SCUART_GET_RX_EMPTY(sc) ((sc)->STATUS & SC_STATUS_RXEMPTY_Msk)
/**
* @brief Get Rx FIFO full flag status from register
*
* @param[in] sc The pointer of smartcard module.
*
* @return Receive FIFO full status
* @retval 0 Receive FIFO is not full
* @retval SC_STATUS_TXFULL_Msk Receive FIFO is full
*
* @details RXFULL (SC_STATUS[2]) is set when Rx buffer counts equals to 4, otherwise it is cleared by hardware.
* \hideinitializer
*/
#define SCUART_GET_RX_FULL(sc) ((sc)->STATUS & SC_STATUS_RXFULL_Msk)
/**
* @brief Check if receive data number in FIFO reach FIFO trigger level or not
*
* @param[in] sc The pointer of smartcard module.
*
* @return Receive FIFO data status
* @retval 0 The number of bytes in receive FIFO is less than trigger level
* @retval 1 The number of bytes in receive FIFO equals or larger than trigger level
*
* @details RDAIF (SC_INTSTS[0]) is used for received data reaching trigger level RXTRGLV (SC_CTL[7:6]) interrupt status flag.
*
* @note If receive trigger level is \b not 1 byte, this macro return 0 does not necessary indicates there is no data in FIFO.
* \hideinitializer
*/
#define SCUART_IS_RX_READY(sc) (((sc)->INTSTS & SC_INTSTS_RDAIF_Msk)? 1 : 0)
/**
* @brief Check specified smartcard port receive FIFO is full or not
*
* @param[in] sc The pointer of smartcard module.
*
* @return Receive FIFO full status
* @retval 0 Receive FIFO is not full
* @retval 1 Receive FIFO is full
*
* @details RXFULLF( SC_STATUS[2]) is set when Rx buffer counts equals to 4, otherwise it is cleared by hardware.
* \hideinitializer
*/
#define SCUART_IS_RX_FULL(sc) (((sc)->STATUS & SC_STATUS_RXFULL_Msk)? 1 : 0)
/* Interrupt Macros */
/**
* @brief Enable specified interrupts
*
* @param[in] sc The pointer of smartcard module.
* @param[in] u32Mask Interrupt masks to enable, a combination of following bits,
* - \ref SC_INTEN_RXTOIEN_Msk
* - \ref SC_INTEN_TERRIEN_Msk
* - \ref SC_INTEN_TBEIEN_Msk
* - \ref SC_INTEN_RDAIEN_Msk
*
* @return None
*
* @details The macro is used to enable receiver buffer time-out interrupt, transfer error interrupt,
* transmit buffer empty interrupt or receive data reach trigger level interrupt.
* \hideinitializer
*/
#define SCUART_ENABLE_INT(sc, u32Mask) ((sc)->INTEN |= (u32Mask))
/**
* @brief Disable specified interrupts
*
* @param[in] sc The pointer of smartcard module.
* @param[in] u32Mask Interrupt masks to disable, a combination of following bits,
* - \ref SC_INTEN_RXTOIEN_Msk
* - \ref SC_INTEN_TERRIEN_Msk
* - \ref SC_INTEN_TBEIEN_Msk
* - \ref SC_INTEN_RDAIEN_Msk
*
* @return None
*
* @details The macro is used to disable receiver buffer time-out interrupt, transfer error interrupt,
* transmit buffer empty interrupt or receive data reach trigger level interrupt.
* \hideinitializer
*/
#define SCUART_DISABLE_INT(sc, u32Mask) ((sc)->INTEN &= ~(u32Mask))
/**
* @brief Get specified interrupt flag/status
*
* @param[in] sc The pointer of smartcard module.
* @param[in] u32Type Interrupt flag/status to check, could be one of following value
* - \ref SC_INTSTS_RXTOIF_Msk
* - \ref SC_INTSTS_TERRIF_Msk
* - \ref SC_INTSTS_TBEIF_Msk
* - \ref SC_INTSTS_RDAIF_Msk
*
* @return The status of specified interrupt
* @retval 0 Specified interrupt does not happened
* @retval 1 Specified interrupt happened
*
* @details The macro is used to get receiver buffer time-out interrupt status, transfer error interrupt status,
* transmit buffer empty interrupt status or receive data reach interrupt status.
* \hideinitializer
*/
#define SCUART_GET_INT_FLAG(sc, u32Type) (((sc)->INTSTS & (u32Type))? 1 : 0)
/**
* @brief Clear specified interrupt flag/status
*
* @param[in] sc The pointer of smartcard module.
* @param[in] u32Type Interrupt flag/status to clear, only \ref SC_INTSTS_TERRIF_Msk valid for this macro.
*
* @return None
*
* @details The macro is used to clear transfer error interrupt flag.
* \hideinitializer
*/
#define SCUART_CLR_INT_FLAG(sc, u32Type) ((sc)->INTSTS = (u32Type))
/**
* @brief Get receive error flag/status
*
* @param[in] sc The pointer of smartcard module.
*
* @return Current receive error status, could one of following errors:
* @retval SC_STATUS_PEF_Msk Parity error
* @retval SC_STATUS_FEF_Msk Frame error
* @retval SC_STATUS_BEF_Msk Break error
*
* @details The macro is used to get receiver parity error status, frame error status or break error status.
* \hideinitializer
*/
#define SCUART_GET_ERR_FLAG(sc) ((sc)->STATUS & (SC_STATUS_PEF_Msk | SC_STATUS_FEF_Msk | SC_STATUS_BEF_Msk))
/**
* @brief Clear specified receive error flag/status
*
* @param[in] sc The pointer of smartcard module.
* @param[in] u32Mask Receive error flag/status to clear, combination following values
* - \ref SC_STATUS_PEF_Msk
* - \ref SC_STATUS_FEF_Msk
* - \ref SC_STATUS_BEF_Msk
*
* @return None
*
* @details The macro is used to clear receiver parity error flag, frame error flag or break error flag.
* \hideinitializer
*/
#define SCUART_CLR_ERR_FLAG(sc, u32Mask) ((sc)->STATUS = (u32Mask))
void SCUART_Close(SC_T* sc);
uint32_t SCUART_Open(SC_T* sc, uint32_t u32Baudrate);
uint32_t SCUART_Read(SC_T* sc, uint8_t pu8RxBuf[], uint32_t u32ReadBytes);
uint32_t SCUART_SetLineConfig(SC_T* sc, uint32_t u32Baudrate, uint32_t u32DataWidth, uint32_t u32Parity, uint32_t u32StopBits);
void SCUART_SetTimeoutCnt(SC_T* sc, uint32_t u32TOC);
void SCUART_Write(SC_T* sc, uint8_t pu8TxBuf[], uint32_t u32WriteBytes);
/**@}*/ /* end of group SCUART_EXPORTED_FUNCTIONS */
/**@}*/ /* end of group SCUART_Driver */
/**@}*/ /* end of group Standard_Driver */
#ifdef __cplusplus
}
#endif
#endif /* __NU_SCUART_H__ */
View Git Blame Copy Permalink