373 lines
19 KiB
C
373 lines
19 KiB
C
//###########################################################################
|
|
//
|
|
// FILE: hw_emif.h
|
|
//
|
|
// TITLE: Definitions for the C28x EMIF registers.
|
|
//
|
|
//###########################################################################
|
|
// $TI Release: F2837xD Support Library v3.05.00.00 $
|
|
// $Release Date: Tue Jun 26 03:15:23 CDT 2018 $
|
|
// $Copyright:
|
|
// Copyright (C) 2013-2018 Texas Instruments Incorporated - http://www.ti.com/
|
|
//
|
|
// Redistribution and use in source and binary forms, with or without
|
|
// modification, are permitted provided that the following conditions
|
|
// are met:
|
|
//
|
|
// Redistributions of source code must retain the above copyright
|
|
// notice, this list of conditions and the following disclaimer.
|
|
//
|
|
// Redistributions in binary form must reproduce the above copyright
|
|
// notice, this list of conditions and the following disclaimer in the
|
|
// documentation and/or other materials provided with the
|
|
// distribution.
|
|
//
|
|
// Neither the name of Texas Instruments Incorporated nor the names of
|
|
// its contributors may be used to endorse or promote products derived
|
|
// from this software without specific prior written permission.
|
|
//
|
|
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
// $
|
|
//###########################################################################
|
|
|
|
#ifndef __HW_EMIF_H__
|
|
#define __HW_EMIF_H__
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the EMIF register offsets
|
|
//
|
|
//*****************************************************************************
|
|
#define EMIF_O_RCSR 0x0 // Revision Code and Status
|
|
// Register
|
|
#define EMIF_O_ASYNC_WCCR 0x2 // Async Wait Cycle Config
|
|
// Register
|
|
#define EMIF_O_SDRAM_CR 0x4 // SDRAM
|
|
// (pad_cs_o_n[0]/pad_cs_o_n[1])
|
|
// Config Register
|
|
#define EMIF_O_SDRAM_RCR 0x6 // SDRAM Refresh Control Register
|
|
#define EMIF_O_ASYNC_CS2_CR 0x8 // Async 1 (pad_cs_o_n[2]) Config
|
|
// Register
|
|
#define EMIF_O_ASYNC_CS3_CR 0xA // Async 2 (pad_cs_o_n[3]) Config
|
|
// Register
|
|
#define EMIF_O_ASYNC_CS4_CR 0xC // Async 3 (pad_cs_o_n[4]) Config
|
|
// Register
|
|
#define EMIF_O_ASYNC_CS5_CR 0xE // Async 4 (pad_cs_o_n[5]) Config
|
|
// Register
|
|
#define EMIF_O_SDRAM_TR 0x10 // SDRAM Timing Register
|
|
#define EMIF_O_TOTAL_SDRAM_AR 0x18 // Total SDRAM Accesses Register
|
|
#define EMIF_O_TOTAL_SDRAM_ACTR 0x1A // Total SDRAM Activate Register
|
|
#define EMIF_O_SDR_EXT_TMNG 0x1E // SDRAM SR/PD Exit Timing
|
|
// Register
|
|
#define EMIF_O_INT_RAW 0x20 // Interrupt Raw Register
|
|
#define EMIF_O_INT_MSK 0x22 // Interrupt Masked Register
|
|
#define EMIF_O_INT_MSK_SET 0x24 // Interrupt Mask Set Register
|
|
#define EMIF_O_INT_MSK_CLR 0x26 // Interrupt Mask Clear Register
|
|
#define EMIF_O_IO_CTRL 0x28 // IO Control Register
|
|
#define EMIF_O_IO_STAT 0x2A // IO Status Register
|
|
#define EMIF_O_MODEL_REL_NUM 0x56 // Module Release Number Register
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the RCSR register
|
|
//
|
|
//*****************************************************************************
|
|
#define EMIF_RCSR_MINOR_REVISION_S 0
|
|
#define EMIF_RCSR_MINOR_REVISION_M 0xFF // Minor Revision.
|
|
#define EMIF_RCSR_MAJOR_REVISION_S 8
|
|
#define EMIF_RCSR_MAJOR_REVISION_M 0xFF00 // Major Revision.
|
|
#define EMIF_RCSR_MODULE_ID_S 16
|
|
#define EMIF_RCSR_MODULE_ID_M 0x3FFF0000 // EMIF module ID.
|
|
#define EMIF_RCSR_FR 0x40000000 // EMIF is running in full rate or
|
|
// half rate.
|
|
#define EMIF_RCSR_BE 0x80000000 // EMIF endian mode.
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the ASYNC_WCCR register
|
|
//
|
|
//*****************************************************************************
|
|
#define EMIF_ASYNC_WCCR_MAX_EXT_WAIT_S 0
|
|
#define EMIF_ASYNC_WCCR_MAX_EXT_WAIT_M 0xFF // Maximum Extended Wait cycles.
|
|
#define EMIF_ASYNC_WCCR_CS2_WAIT_S 16
|
|
#define EMIF_ASYNC_WCCR_CS2_WAIT_M 0x30000 // Maps the wait signal for chip
|
|
// select 2.
|
|
#define EMIF_ASYNC_WCCR_CS3_WAIT_S 18
|
|
#define EMIF_ASYNC_WCCR_CS3_WAIT_M 0xC0000 // Maps the wait signal for chip
|
|
// select 3.
|
|
#define EMIF_ASYNC_WCCR_CS4_WAIT_S 20
|
|
#define EMIF_ASYNC_WCCR_CS4_WAIT_M 0x300000 // Maps the wait signal for chip
|
|
// select 4.
|
|
#define EMIF_ASYNC_WCCR_CS5_WAIT_S 22
|
|
#define EMIF_ASYNC_WCCR_CS5_WAIT_M 0xC00000 // Maps the wait signal for chip
|
|
// select 5.
|
|
#define EMIF_ASYNC_WCCR_WP0 0x10000000 // Wait Polarity for
|
|
// pad_wait_i[0].
|
|
#define EMIF_ASYNC_WCCR_WP1 0x20000000 // Wait Polarity for
|
|
// pad_wait_i[1].
|
|
#define EMIF_ASYNC_WCCR_WP2 0x40000000 // Wait Polarity for
|
|
// pad_wait_i[2].
|
|
#define EMIF_ASYNC_WCCR_WP3 0x80000000 // Wait Polarity for
|
|
// pad_wait_i[3].
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SDRAM_CR register
|
|
//
|
|
//*****************************************************************************
|
|
#define EMIF_SDRAM_CR_PAGESIGE_S 0
|
|
#define EMIF_SDRAM_CR_PAGESIGE_M 0x7 // Page Size.
|
|
#define EMIF_SDRAM_CR_EBANK 0x8 // External chip select setup.
|
|
#define EMIF_SDRAM_CR_IBANK_S 4
|
|
#define EMIF_SDRAM_CR_IBANK_M 0x70 // Internal Bank setup of SDRAM
|
|
// devices.
|
|
#define EMIF_SDRAM_CR_BIT_11_9_LOCK 0x100 // Bits 11 to 9 are writable only
|
|
// if this bit is set.
|
|
#define EMIF_SDRAM_CR_CL_S 9
|
|
#define EMIF_SDRAM_CR_CL_M 0xE00 // CAS Latency.
|
|
#define EMIF_SDRAM_CR_BIT_13_LOCK 0x1000 // Bits 13 is writable only if
|
|
// this bit is set.
|
|
#define EMIF_SDRAM_CR_NM 0x4000 // Narrow Mode.
|
|
#define EMIF_SDRAM_CR_BIT_25_17_LOCK 0x10000 // Bits 25 to 17 are writable only
|
|
// if this bit is set
|
|
#define EMIF_SDRAM_CR_IBANK_POS 0x80000 // Internal bank position.
|
|
#define EMIF_SDRAM_CR_ROWSIZE_S 20
|
|
#define EMIF_SDRAM_CR_ROWSIZE_M 0x700000 // Row Size.
|
|
#define EMIF_SDRAM_CR_PASR_S 23
|
|
#define EMIF_SDRAM_CR_PASR_M 0x3800000 // Partial Array Self Refresh.
|
|
#define EMIF_SDRAM_CR_PDWR 0x20000000 // Perform refreshes during Power
|
|
// Down.
|
|
#define EMIF_SDRAM_CR_PD 0x40000000 // Power Down.
|
|
#define EMIF_SDRAM_CR_SR 0x80000000 // Self Refresh.
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SDRAM_RCR register
|
|
//
|
|
//*****************************************************************************
|
|
#define EMIF_SDRAM_RCR_REFRESH_RATE_S 0
|
|
#define EMIF_SDRAM_RCR_REFRESH_RATE_M 0x1FFF // Refresh Rate.
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the ASYNC_CS2_CR register
|
|
//
|
|
//*****************************************************************************
|
|
#define EMIF_ASYNC_CS2_CR_ASIZE_S 0
|
|
#define EMIF_ASYNC_CS2_CR_ASIZE_M 0x3 // Asynchronous Memory Size.
|
|
#define EMIF_ASYNC_CS2_CR_TA_S 2
|
|
#define EMIF_ASYNC_CS2_CR_TA_M 0xC // Turn Around cycles.
|
|
#define EMIF_ASYNC_CS2_CR_R_HOLD_S 4
|
|
#define EMIF_ASYNC_CS2_CR_R_HOLD_M 0x70 // Read Strobe Hold cycles.
|
|
#define EMIF_ASYNC_CS2_CR_R_STROBE_S 7
|
|
#define EMIF_ASYNC_CS2_CR_R_STROBE_M 0x1F80 // Read Strobe Duration cycles.
|
|
#define EMIF_ASYNC_CS2_CR_R_SETUP_S 13
|
|
#define EMIF_ASYNC_CS2_CR_R_SETUP_M 0x1E000 // Read Strobe Setup cycles.
|
|
#define EMIF_ASYNC_CS2_CR_W_HOLD_S 17
|
|
#define EMIF_ASYNC_CS2_CR_W_HOLD_M 0xE0000 // Write Strobe Hold cycles.
|
|
#define EMIF_ASYNC_CS2_CR_W_STROBE_S 20
|
|
#define EMIF_ASYNC_CS2_CR_W_STROBE_M 0x3F00000 // Write Strobe Duration cycles.
|
|
#define EMIF_ASYNC_CS2_CR_W_SETUP_S 26
|
|
#define EMIF_ASYNC_CS2_CR_W_SETUP_M 0x3C000000 // Write Strobe Setup cycles.
|
|
#define EMIF_ASYNC_CS2_CR_EW 0x40000000 // Extend Wait mode.
|
|
#define EMIF_ASYNC_CS2_CR_SS 0x80000000 // Select Strobe mode.
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the ASYNC_CS3_CR register
|
|
//
|
|
//*****************************************************************************
|
|
#define EMIF_ASYNC_CS3_CR_ASIZE_S 0
|
|
#define EMIF_ASYNC_CS3_CR_ASIZE_M 0x3 // Asynchronous Memory Size.
|
|
#define EMIF_ASYNC_CS3_CR_TA_S 2
|
|
#define EMIF_ASYNC_CS3_CR_TA_M 0xC // Turn Around cycles.
|
|
#define EMIF_ASYNC_CS3_CR_R_HOLD_S 4
|
|
#define EMIF_ASYNC_CS3_CR_R_HOLD_M 0x70 // Read Strobe Hold cycles.
|
|
#define EMIF_ASYNC_CS3_CR_R_STROBE_S 7
|
|
#define EMIF_ASYNC_CS3_CR_R_STROBE_M 0x1F80 // Read Strobe Duration cycles.
|
|
#define EMIF_ASYNC_CS3_CR_R_SETUP_S 13
|
|
#define EMIF_ASYNC_CS3_CR_R_SETUP_M 0x1E000 // Read Strobe Setup cycles.
|
|
#define EMIF_ASYNC_CS3_CR_W_HOLD_S 17
|
|
#define EMIF_ASYNC_CS3_CR_W_HOLD_M 0xE0000 // Write Strobe Hold cycles.
|
|
#define EMIF_ASYNC_CS3_CR_W_STROBE_S 20
|
|
#define EMIF_ASYNC_CS3_CR_W_STROBE_M 0x3F00000 // Write Strobe Duration cycles.
|
|
#define EMIF_ASYNC_CS3_CR_W_SETUP_S 26
|
|
#define EMIF_ASYNC_CS3_CR_W_SETUP_M 0x3C000000 // Write Strobe Setup cycles.
|
|
#define EMIF_ASYNC_CS3_CR_EW 0x40000000 // Extend Wait mode.
|
|
#define EMIF_ASYNC_CS3_CR_SS 0x80000000 // Select Strobe mode.
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the ASYNC_CS4_CR register
|
|
//
|
|
//*****************************************************************************
|
|
#define EMIF_ASYNC_CS4_CR_ASIZE_S 0
|
|
#define EMIF_ASYNC_CS4_CR_ASIZE_M 0x3 // Asynchronous Memory Size.
|
|
#define EMIF_ASYNC_CS4_CR_TA_S 2
|
|
#define EMIF_ASYNC_CS4_CR_TA_M 0xC // Turn Around cycles.
|
|
#define EMIF_ASYNC_CS4_CR_R_HOLD_S 4
|
|
#define EMIF_ASYNC_CS4_CR_R_HOLD_M 0x70 // Read Strobe Hold cycles.
|
|
#define EMIF_ASYNC_CS4_CR_R_STROBE_S 7
|
|
#define EMIF_ASYNC_CS4_CR_R_STROBE_M 0x1F80 // Read Strobe Duration cycles.
|
|
#define EMIF_ASYNC_CS4_CR_R_SETUP_S 13
|
|
#define EMIF_ASYNC_CS4_CR_R_SETUP_M 0x1E000 // Read Strobe Setup cycles.
|
|
#define EMIF_ASYNC_CS4_CR_W_HOLD_S 17
|
|
#define EMIF_ASYNC_CS4_CR_W_HOLD_M 0xE0000 // Write Strobe Hold cycles.
|
|
#define EMIF_ASYNC_CS4_CR_W_STROBE_S 20
|
|
#define EMIF_ASYNC_CS4_CR_W_STROBE_M 0x3F00000 // Write Strobe Duration cycles.
|
|
#define EMIF_ASYNC_CS4_CR_W_SETUP_S 26
|
|
#define EMIF_ASYNC_CS4_CR_W_SETUP_M 0x3C000000 // Write Strobe Setup cycles.
|
|
#define EMIF_ASYNC_CS4_CR_EW 0x40000000 // Extend Wait mode.
|
|
#define EMIF_ASYNC_CS4_CR_SS 0x80000000 // Select Strobe mode.
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the ASYNC_CS5_CR register
|
|
//
|
|
//*****************************************************************************
|
|
#define EMIF_ASYNC_CS5_CR_ASIZE_S 0
|
|
#define EMIF_ASYNC_CS5_CR_ASIZE_M 0x3 // Asynchronous Memory Size.
|
|
#define EMIF_ASYNC_CS5_CR_TA_S 2
|
|
#define EMIF_ASYNC_CS5_CR_TA_M 0xC // Turn Around cycles.
|
|
#define EMIF_ASYNC_CS5_CR_R_HOLD_S 4
|
|
#define EMIF_ASYNC_CS5_CR_R_HOLD_M 0x70 // Read Strobe Hold cycles.
|
|
#define EMIF_ASYNC_CS5_CR_R_STROBE_S 7
|
|
#define EMIF_ASYNC_CS5_CR_R_STROBE_M 0x1F80 // Read Strobe Duration cycles.
|
|
#define EMIF_ASYNC_CS5_CR_R_SETUP_S 13
|
|
#define EMIF_ASYNC_CS5_CR_R_SETUP_M 0x1E000 // Read Strobe Setup cycles.
|
|
#define EMIF_ASYNC_CS5_CR_W_HOLD_S 17
|
|
#define EMIF_ASYNC_CS5_CR_W_HOLD_M 0xE0000 // Write Strobe Hold cycles.
|
|
#define EMIF_ASYNC_CS5_CR_W_STROBE_S 20
|
|
#define EMIF_ASYNC_CS5_CR_W_STROBE_M 0x3F00000 // Write Strobe Duration cycles.
|
|
#define EMIF_ASYNC_CS5_CR_W_SETUP_S 26
|
|
#define EMIF_ASYNC_CS5_CR_W_SETUP_M 0x3C000000 // Write Strobe Setup cycles.
|
|
#define EMIF_ASYNC_CS5_CR_EW 0x40000000 // Extend Wait mode.
|
|
#define EMIF_ASYNC_CS5_CR_SS 0x80000000 // Select Strobe mode.
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SDRAM_TR register
|
|
//
|
|
//*****************************************************************************
|
|
#define EMIF_SDRAM_TR_T_RRD_S 4
|
|
#define EMIF_SDRAM_TR_T_RRD_M 0x70 // Activate to Activate timing for
|
|
// different bank.
|
|
#define EMIF_SDRAM_TR_T_RC_S 8
|
|
#define EMIF_SDRAM_TR_T_RC_M 0xF00 // Activate to Activate timing .
|
|
#define EMIF_SDRAM_TR_T_RAS_S 12
|
|
#define EMIF_SDRAM_TR_T_RAS_M 0xF000 // Activate to Precharge timing.
|
|
#define EMIF_SDRAM_TR_T_WR_S 16
|
|
#define EMIF_SDRAM_TR_T_WR_M 0x70000 // Last Write to Precharge timing.
|
|
#define EMIF_SDRAM_TR_T_RCD_S 20
|
|
#define EMIF_SDRAM_TR_T_RCD_M 0x700000 // Activate to Read/Write timing.
|
|
#define EMIF_SDRAM_TR_T_RP_S 24
|
|
#define EMIF_SDRAM_TR_T_RP_M 0x7000000 // Precharge to Activate/Refresh
|
|
// timing.
|
|
#define EMIF_SDRAM_TR_T_RFC_S 27
|
|
#define EMIF_SDRAM_TR_T_RFC_M 0xF8000000 // Refresh/Load Mode to
|
|
// Refresh/Activate timing
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the TOTAL_SDRAM_AR register
|
|
//
|
|
//*****************************************************************************
|
|
#define EMIF_TOTAL_SDRAM_AR_TOTAL_SDRAM_AR_S 0
|
|
#define EMIF_TOTAL_SDRAM_AR_TOTAL_SDRAM_AR_M 0xFFFFFFFF // Total number of VBUSP accesses
|
|
// to SDRAM.
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the TOTAL_SDRAM_ACTR register
|
|
//
|
|
//*****************************************************************************
|
|
#define EMIF_TOTAL_SDRAM_ACTR_TOTAL_SDRAM_ACTR_S 0
|
|
#define EMIF_TOTAL_SDRAM_ACTR_TOTAL_SDRAM_ACTR_M 0xFFFFFFFF // Number of SDRAM accesses which
|
|
// required an activate command.
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SDR_EXT_TMNG register
|
|
//
|
|
//*****************************************************************************
|
|
#define EMIF_SDR_EXT_TMNG_T_XS_S 0
|
|
#define EMIF_SDR_EXT_TMNG_T_XS_M 0x1F // Self Refresh exit to new
|
|
// command timing.
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the INT_RAW register
|
|
//
|
|
//*****************************************************************************
|
|
#define EMIF_INT_RAW_AT 0x1 // Asynchronous Timeout.
|
|
#define EMIF_INT_RAW_LT 0x2 // Line Trap.
|
|
#define EMIF_INT_RAW_WR_S 2
|
|
#define EMIF_INT_RAW_WR_M 0x3C // Wait Rise.
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the INT_MSK register
|
|
//
|
|
//*****************************************************************************
|
|
#define EMIF_INT_MSK_AT_MASKED 0x1 // Asynchronous Timeout.
|
|
#define EMIF_INT_MSK_LT_MASKED 0x2 // Line Trap.
|
|
#define EMIF_INT_MSK_WR_MASKED_S 2
|
|
#define EMIF_INT_MSK_WR_MASKED_M 0x3C // Wait Rise.
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the INT_MSK_SET register
|
|
//
|
|
//*****************************************************************************
|
|
#define EMIF_INT_MSK_SET_AT_MASK_SET 0x1 // Asynchronous Timeout.
|
|
#define EMIF_INT_MSK_SET_LT_MASK_SET 0x2 // Line Trap.
|
|
#define EMIF_INT_MSK_SET_WR_MASK_SET_S 2
|
|
#define EMIF_INT_MSK_SET_WR_MASK_SET_M 0x3C // Wait Rise.
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the INT_MSK_CLR register
|
|
//
|
|
//*****************************************************************************
|
|
#define EMIF_INT_MSK_CLR_AT_MASK_CLR 0x1 // Asynchronous Timeout.
|
|
#define EMIF_INT_MSK_CLR_LT_MASK_CLR 0x2 // Line Trap.
|
|
#define EMIF_INT_MSK_CLR_WR_MASK_CLR_S 2
|
|
#define EMIF_INT_MSK_CLR_WR_MASK_CLR_M 0x3C // Wait Rise.
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the IO_CTRL register
|
|
//
|
|
//*****************************************************************************
|
|
#define EMIF_IO_CTRL_IO_CTRL_S 0
|
|
#define EMIF_IO_CTRL_IO_CTRL_M 0xFFFF // VTP calibration control for the
|
|
// IOs
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the IO_STAT register
|
|
//
|
|
//*****************************************************************************
|
|
#define EMIF_IO_STAT_IO_STAT_S 0
|
|
#define EMIF_IO_STAT_IO_STAT_M 0xFFFF // VTP calibration status of the
|
|
// IOs
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the MODEL_REL_NUM register
|
|
//
|
|
//*****************************************************************************
|
|
#define EMIF_MODEL_REL_NUM_RELEASE_NUM_S 0
|
|
#define EMIF_MODEL_REL_NUM_RELEASE_NUM_M 0xFF // Release Number.
|
|
#endif
|