667 lines
16 KiB
C
667 lines
16 KiB
C
#include <rtthread.h>
|
|
#include <netif/ethernetif.h>
|
|
|
|
#include "dm9000.h"
|
|
#include <s3c24x0.h>
|
|
|
|
/*
|
|
* Davicom DM9000EP driver
|
|
*
|
|
* IRQ_LAN connects to EINT7(GPF7)
|
|
* nLAN_CS connects to nGCS4
|
|
*/
|
|
|
|
/* #define DM9000_DEBUG 1 */
|
|
#if DM9000_DEBUG
|
|
#define DM9000_TRACE rt_kprintf
|
|
#else
|
|
#define DM9000_TRACE(...)
|
|
#endif
|
|
|
|
/*
|
|
* DM9000 interrupt line is connected to PF7
|
|
*/
|
|
//--------------------------------------------------------
|
|
|
|
#define DM9000_PHY 0x40 /* PHY address 0x01 */
|
|
|
|
#define MAX_ADDR_LEN 6
|
|
enum DM9000_PHY_mode
|
|
{
|
|
DM9000_10MHD = 0, DM9000_100MHD = 1,
|
|
DM9000_10MFD = 4, DM9000_100MFD = 5,
|
|
DM9000_AUTO = 8, DM9000_1M_HPNA = 0x10
|
|
};
|
|
|
|
enum DM9000_TYPE
|
|
{
|
|
TYPE_DM9000E,
|
|
TYPE_DM9000A,
|
|
TYPE_DM9000B
|
|
};
|
|
|
|
struct rt_dm9000_eth
|
|
{
|
|
/* inherit from ethernet device */
|
|
struct eth_device parent;
|
|
|
|
enum DM9000_TYPE type;
|
|
enum DM9000_PHY_mode mode;
|
|
|
|
rt_uint8_t imr_all;
|
|
|
|
rt_uint8_t packet_cnt; /* packet I or II */
|
|
rt_uint16_t queue_packet_len; /* queued packet (packet II) */
|
|
|
|
/* interface address info. */
|
|
rt_uint8_t dev_addr[MAX_ADDR_LEN]; /* hw address */
|
|
};
|
|
static struct rt_dm9000_eth dm9000_device;
|
|
static struct rt_semaphore sem_ack, sem_lock;
|
|
|
|
void rt_dm9000_isr(int irqno);
|
|
|
|
static void delay_ms(rt_uint32_t ms)
|
|
{
|
|
rt_uint32_t len;
|
|
for (;ms > 0; ms --)
|
|
for (len = 0; len < 100; len++ );
|
|
}
|
|
|
|
/* Read a byte from I/O port */
|
|
rt_inline rt_uint8_t dm9000_io_read(rt_uint16_t reg)
|
|
{
|
|
DM9000_IO = reg;
|
|
return (rt_uint8_t) DM9000_DATA;
|
|
}
|
|
|
|
/* Write a byte to I/O port */
|
|
rt_inline void dm9000_io_write(rt_uint16_t reg, rt_uint16_t value)
|
|
{
|
|
DM9000_IO = reg;
|
|
DM9000_DATA = value;
|
|
}
|
|
|
|
/* Read a word from phyxcer */
|
|
rt_inline rt_uint16_t phy_read(rt_uint16_t reg)
|
|
{
|
|
rt_uint16_t val;
|
|
|
|
/* Fill the phyxcer register into REG_0C */
|
|
dm9000_io_write(DM9000_EPAR, DM9000_PHY | reg);
|
|
dm9000_io_write(DM9000_EPCR, 0xc); /* Issue phyxcer read command */
|
|
|
|
delay_ms(100); /* Wait read complete */
|
|
|
|
dm9000_io_write(DM9000_EPCR, 0x0); /* Clear phyxcer read command */
|
|
val = (dm9000_io_read(DM9000_EPDRH) << 8) | dm9000_io_read(DM9000_EPDRL);
|
|
|
|
return val;
|
|
}
|
|
|
|
/* Write a word to phyxcer */
|
|
rt_inline void phy_write(rt_uint16_t reg, rt_uint16_t value)
|
|
{
|
|
/* Fill the phyxcer register into REG_0C */
|
|
dm9000_io_write(DM9000_EPAR, DM9000_PHY | reg);
|
|
|
|
/* Fill the written data into REG_0D & REG_0E */
|
|
dm9000_io_write(DM9000_EPDRL, (value & 0xff));
|
|
dm9000_io_write(DM9000_EPDRH, ((value >> 8) & 0xff));
|
|
dm9000_io_write(DM9000_EPCR, 0xa); /* Issue phyxcer write command */
|
|
|
|
delay_ms(500); /* Wait write complete */
|
|
|
|
dm9000_io_write(DM9000_EPCR, 0x0); /* Clear phyxcer write command */
|
|
}
|
|
|
|
/* Set PHY operationg mode */
|
|
rt_inline void phy_mode_set(rt_uint32_t media_mode)
|
|
{
|
|
rt_uint16_t phy_reg4 = 0x01e1, phy_reg0 = 0x1000;
|
|
if (!(media_mode & DM9000_AUTO))
|
|
{
|
|
switch (media_mode)
|
|
{
|
|
case DM9000_10MHD:
|
|
phy_reg4 = 0x21;
|
|
phy_reg0 = 0x0000;
|
|
break;
|
|
case DM9000_10MFD:
|
|
phy_reg4 = 0x41;
|
|
phy_reg0 = 0x1100;
|
|
break;
|
|
case DM9000_100MHD:
|
|
phy_reg4 = 0x81;
|
|
phy_reg0 = 0x2000;
|
|
break;
|
|
case DM9000_100MFD:
|
|
phy_reg4 = 0x101;
|
|
phy_reg0 = 0x3100;
|
|
break;
|
|
}
|
|
phy_write(4, phy_reg4); /* Set PHY media mode */
|
|
phy_write(0, phy_reg0); /* Tmp */
|
|
}
|
|
|
|
dm9000_io_write(DM9000_GPCR, 0x01); /* Let GPIO0 output */
|
|
dm9000_io_write(DM9000_GPR, 0x00); /* Enable PHY */
|
|
}
|
|
|
|
/* interrupt service routine */
|
|
void rt_dm9000_isr(int irqno)
|
|
{
|
|
rt_uint16_t int_status;
|
|
rt_uint16_t last_io;
|
|
rt_uint32_t eint_pend;
|
|
|
|
eint_pend = EINTPEND;
|
|
/* EINT7 for DM9000 */
|
|
if((eint_pend & 0x80) == 0x80)
|
|
{
|
|
|
|
last_io = DM9000_IO;
|
|
|
|
/* Disable all interrupts */
|
|
// dm9000_io_write(DM9000_IMR, IMR_PAR);
|
|
|
|
/* Got DM9000 interrupt status */
|
|
int_status = dm9000_io_read(DM9000_ISR); /* Got ISR */
|
|
dm9000_io_write(DM9000_ISR, int_status); /* Clear ISR status */
|
|
|
|
DM9000_TRACE("dm9000 isr: int status %04x\n", int_status);
|
|
|
|
/* receive overflow */
|
|
if (int_status & ISR_ROS)
|
|
{
|
|
rt_kprintf("overflow\n");
|
|
}
|
|
|
|
if (int_status & ISR_ROOS)
|
|
{
|
|
rt_kprintf("overflow counter overflow\n");
|
|
}
|
|
|
|
/* Received the coming packet */
|
|
if (int_status & ISR_PRS)
|
|
{
|
|
/* disable receive interrupt */
|
|
dm9000_io_write(DM9000_IMR, IMR_PAR);
|
|
dm9000_device.imr_all = IMR_PAR | IMR_PTM;
|
|
dm9000_io_write(DM9000_IMR, dm9000_device.imr_all);
|
|
|
|
/* a frame has been received */
|
|
eth_device_ready(&(dm9000_device.parent));
|
|
}
|
|
|
|
/* Transmit Interrupt check */
|
|
if (int_status & ISR_PTS)
|
|
{
|
|
/* transmit done */
|
|
int tx_status = dm9000_io_read(DM9000_NSR); /* Got TX status */
|
|
|
|
if (tx_status & (NSR_TX2END | NSR_TX1END))
|
|
{
|
|
dm9000_device.packet_cnt --;
|
|
if (dm9000_device.packet_cnt > 0)
|
|
{
|
|
DM9000_TRACE("dm9000 isr: tx second packet\n");
|
|
|
|
/* transmit packet II */
|
|
/* Set TX length to DM9000 */
|
|
dm9000_io_write(DM9000_TXPLL, dm9000_device.queue_packet_len & 0xff);
|
|
dm9000_io_write(DM9000_TXPLH, (dm9000_device.queue_packet_len >> 8) & 0xff);
|
|
|
|
/* Issue TX polling command */
|
|
dm9000_io_write(DM9000_TCR, TCR_TXREQ); /* Cleared after TX complete */
|
|
}
|
|
|
|
/* One packet sent complete */
|
|
rt_sem_release(&sem_ack);
|
|
}
|
|
}
|
|
|
|
/* Re-enable interrupt mask */
|
|
// dm9000_io_write(DM9000_IMR, dm9000_device.imr_all);
|
|
|
|
DM9000_IO = last_io;
|
|
}
|
|
|
|
/* clear EINT pending bit */
|
|
EINTPEND = eint_pend;
|
|
}
|
|
|
|
/* RT-Thread Device Interface */
|
|
/* initialize the interface */
|
|
static rt_err_t rt_dm9000_init(rt_device_t dev)
|
|
{
|
|
int i, oft, lnk;
|
|
rt_uint32_t value;
|
|
|
|
/* RESET device */
|
|
dm9000_io_write(DM9000_NCR, NCR_RST);
|
|
delay_ms(1000); /* delay 1ms */
|
|
|
|
/* identfy DM9000 */
|
|
value = dm9000_io_read(DM9000_VIDL);
|
|
value |= dm9000_io_read(DM9000_VIDH) << 8;
|
|
value |= dm9000_io_read(DM9000_PIDL) << 16;
|
|
value |= dm9000_io_read(DM9000_PIDH) << 24;
|
|
if (value == DM9000_ID)
|
|
{
|
|
rt_kprintf("dm9000 id: 0x%x\n", value);
|
|
}
|
|
else
|
|
{
|
|
rt_kprintf("dm9000 id: 0x%x\n", value);
|
|
return -RT_ERROR;
|
|
}
|
|
|
|
/* GPIO0 on pre-activate PHY */
|
|
dm9000_io_write(DM9000_GPR, 0x00); /* REG_1F bit0 activate phyxcer */
|
|
dm9000_io_write(DM9000_GPCR, GPCR_GEP_CNTL); /* Let GPIO0 output */
|
|
dm9000_io_write(DM9000_GPR, 0x00); /* Enable PHY */
|
|
|
|
/* Set PHY */
|
|
phy_mode_set(dm9000_device.mode);
|
|
|
|
/* Program operating register */
|
|
dm9000_io_write(DM9000_NCR, 0x0); /* only intern phy supported by now */
|
|
dm9000_io_write(DM9000_TCR, 0); /* TX Polling clear */
|
|
dm9000_io_write(DM9000_BPTR, 0x3f); /* Less 3Kb, 200us */
|
|
dm9000_io_write(DM9000_FCTR, FCTR_HWOT(3) | FCTR_LWOT(8)); /* Flow Control : High/Low Water */
|
|
dm9000_io_write(DM9000_FCR, 0x0); /* SH FIXME: This looks strange! Flow Control */
|
|
dm9000_io_write(DM9000_SMCR, 0); /* Special Mode */
|
|
dm9000_io_write(DM9000_NSR, NSR_WAKEST | NSR_TX2END | NSR_TX1END); /* clear TX status */
|
|
dm9000_io_write(DM9000_ISR, 0x0f); /* Clear interrupt status */
|
|
dm9000_io_write(DM9000_TCR2, 0x80); /* Switch LED to mode 1 */
|
|
|
|
/* set mac address */
|
|
for (i = 0, oft = 0x10; i < 6; i++, oft++)
|
|
dm9000_io_write(oft, dm9000_device.dev_addr[i]);
|
|
/* set multicast address */
|
|
for (i = 0, oft = 0x16; i < 8; i++, oft++)
|
|
dm9000_io_write(oft, 0xff);
|
|
|
|
/* Activate DM9000 */
|
|
dm9000_io_write(DM9000_RCR, RCR_DIS_LONG | RCR_DIS_CRC | RCR_RXEN); /* RX enable */
|
|
dm9000_io_write(DM9000_IMR, IMR_PAR);
|
|
|
|
if (dm9000_device.mode == DM9000_AUTO)
|
|
{
|
|
while (!(phy_read(1) & 0x20))
|
|
{
|
|
/* autonegation complete bit */
|
|
rt_thread_delay( 10 );
|
|
i++;
|
|
if (i > 20)
|
|
{
|
|
rt_kprintf("could not establish link\n");
|
|
return 0;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* see what we've got */
|
|
lnk = phy_read(17) >> 12;
|
|
rt_kprintf("operating at ");
|
|
switch (lnk)
|
|
{
|
|
case 1:
|
|
rt_kprintf("10M half duplex ");
|
|
break;
|
|
case 2:
|
|
rt_kprintf("10M full duplex ");
|
|
break;
|
|
case 4:
|
|
rt_kprintf("100M half duplex ");
|
|
break;
|
|
case 8:
|
|
rt_kprintf("100M full duplex ");
|
|
break;
|
|
default:
|
|
rt_kprintf("unknown: %d ", lnk);
|
|
break;
|
|
}
|
|
rt_kprintf("mode\n");
|
|
|
|
dm9000_io_write(DM9000_IMR, dm9000_device.imr_all); /* Enable TX/RX interrupt mask */
|
|
|
|
return RT_EOK;
|
|
}
|
|
|
|
static rt_err_t rt_dm9000_open(rt_device_t dev, rt_uint16_t oflag)
|
|
{
|
|
return RT_EOK;
|
|
}
|
|
|
|
static rt_err_t rt_dm9000_close(rt_device_t dev)
|
|
{
|
|
/* RESET devie */
|
|
phy_write(0, 0x8000); /* PHY RESET */
|
|
dm9000_io_write(DM9000_GPR, 0x01); /* Power-Down PHY */
|
|
dm9000_io_write(DM9000_IMR, 0x80); /* Disable all interrupt */
|
|
dm9000_io_write(DM9000_RCR, 0x00); /* Disable RX */
|
|
|
|
return RT_EOK;
|
|
}
|
|
|
|
static rt_size_t rt_dm9000_read(rt_device_t dev, rt_off_t pos, void* buffer, rt_size_t size)
|
|
{
|
|
rt_set_errno(-RT_ENOSYS);
|
|
return 0;
|
|
}
|
|
|
|
static rt_size_t rt_dm9000_write (rt_device_t dev, rt_off_t pos, const void* buffer, rt_size_t size)
|
|
{
|
|
rt_set_errno(-RT_ENOSYS);
|
|
return 0;
|
|
}
|
|
|
|
static rt_err_t rt_dm9000_control(rt_device_t dev, rt_uint8_t cmd, void *args)
|
|
{
|
|
switch (cmd)
|
|
{
|
|
case NIOCTL_GADDR:
|
|
/* get mac address */
|
|
if (args) rt_memcpy(args, dm9000_device.dev_addr, 6);
|
|
else return -RT_ERROR;
|
|
break;
|
|
|
|
default :
|
|
break;
|
|
}
|
|
|
|
return RT_EOK;
|
|
}
|
|
|
|
/* ethernet device interface */
|
|
/* transmit packet. */
|
|
rt_err_t rt_dm9000_tx( rt_device_t dev, struct pbuf* p)
|
|
{
|
|
DM9000_TRACE("dm9000 tx: %d\n", p->tot_len);
|
|
|
|
/* lock DM9000 device */
|
|
rt_sem_take(&sem_lock, RT_WAITING_FOREVER);
|
|
|
|
/* disable dm9000a interrupt */
|
|
dm9000_io_write(DM9000_IMR, IMR_PAR);
|
|
|
|
/* Move data to DM9000 TX RAM */
|
|
DM9000_outb(DM9000_IO_BASE, DM9000_MWCMD);
|
|
|
|
{
|
|
/* q traverses through linked list of pbuf's
|
|
* This list MUST consist of a single packet ONLY */
|
|
struct pbuf *q;
|
|
rt_uint16_t pbuf_index = 0;
|
|
rt_uint8_t word[2], word_index = 0;
|
|
|
|
q = p;
|
|
/* Write data into dm9000a, two bytes at a time
|
|
* Handling pbuf's with odd number of bytes correctly
|
|
* No attempt to optimize for speed has been made */
|
|
while (q)
|
|
{
|
|
if (pbuf_index < q->len)
|
|
{
|
|
word[word_index++] = ((u8_t*)q->payload)[pbuf_index++];
|
|
if (word_index == 2)
|
|
{
|
|
DM9000_outw(DM9000_DATA_BASE, (word[1] << 8) | word[0]);
|
|
word_index = 0;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
q = q->next;
|
|
pbuf_index = 0;
|
|
}
|
|
}
|
|
/* One byte could still be unsent */
|
|
if (word_index == 1)
|
|
{
|
|
DM9000_outw(DM9000_DATA_BASE, word[0]);
|
|
}
|
|
}
|
|
|
|
if (dm9000_device.packet_cnt == 0)
|
|
{
|
|
DM9000_TRACE("dm9000 tx: first packet\n");
|
|
|
|
dm9000_device.packet_cnt ++;
|
|
/* Set TX length to DM9000 */
|
|
dm9000_io_write(DM9000_TXPLL, p->tot_len & 0xff);
|
|
dm9000_io_write(DM9000_TXPLH, (p->tot_len >> 8) & 0xff);
|
|
|
|
/* Issue TX polling command */
|
|
dm9000_io_write(DM9000_TCR, TCR_TXREQ); /* Cleared after TX complete */
|
|
}
|
|
else
|
|
{
|
|
DM9000_TRACE("dm9000 tx: second packet\n");
|
|
|
|
dm9000_device.packet_cnt ++;
|
|
dm9000_device.queue_packet_len = p->tot_len;
|
|
}
|
|
|
|
/* enable dm9000a interrupt */
|
|
dm9000_io_write(DM9000_IMR, dm9000_device.imr_all);
|
|
|
|
/* unlock DM9000 device */
|
|
rt_sem_release(&sem_lock);
|
|
|
|
/* wait ack */
|
|
rt_sem_take(&sem_ack, RT_WAITING_FOREVER);
|
|
|
|
DM9000_TRACE("dm9000 tx done\n");
|
|
|
|
return RT_EOK;
|
|
}
|
|
|
|
/* reception packet. */
|
|
struct pbuf *rt_dm9000_rx(rt_device_t dev)
|
|
{
|
|
struct pbuf* p;
|
|
rt_uint32_t rxbyte;
|
|
rt_uint16_t rx_status, rx_len;
|
|
rt_uint16_t* data;
|
|
|
|
/* init p pointer */
|
|
p = RT_NULL;
|
|
|
|
/* lock DM9000 device */
|
|
rt_sem_take(&sem_lock, RT_WAITING_FOREVER);
|
|
|
|
__error_retry:
|
|
/* Check packet ready or not */
|
|
dm9000_io_read(DM9000_MRCMDX); /* Dummy read */
|
|
rxbyte = DM9000_inb(DM9000_DATA_BASE); /* Got most updated data */
|
|
if (rxbyte)
|
|
{
|
|
if (rxbyte > 1)
|
|
{
|
|
DM9000_TRACE("dm9000 rx: rx error, stop device\n");
|
|
|
|
dm9000_io_write(DM9000_RCR, 0x00); /* Stop Device */
|
|
dm9000_io_write(DM9000_ISR, 0x80); /* Stop INT request */
|
|
}
|
|
|
|
/* A packet ready now & Get status/length */
|
|
DM9000_outb(DM9000_IO_BASE, DM9000_MRCMD);
|
|
|
|
rx_status = DM9000_inw(DM9000_DATA_BASE);
|
|
rx_len = DM9000_inw(DM9000_DATA_BASE);
|
|
|
|
DM9000_TRACE("dm9000 rx: status %04x len %d\n", rx_status, rx_len);
|
|
|
|
/* allocate buffer */
|
|
p = pbuf_alloc(PBUF_LINK, rx_len, PBUF_RAM);
|
|
if (p != RT_NULL)
|
|
{
|
|
struct pbuf* q;
|
|
rt_int32_t len;
|
|
|
|
for (q = p; q != RT_NULL; q= q->next)
|
|
{
|
|
data = (rt_uint16_t*)q->payload;
|
|
len = q->len;
|
|
|
|
while (len > 0)
|
|
{
|
|
*data = DM9000_inw(DM9000_DATA_BASE);
|
|
data ++;
|
|
len -= 2;
|
|
}
|
|
}
|
|
}
|
|
else
|
|
{
|
|
rt_uint16_t dummy;
|
|
|
|
rt_kprintf("dm9000 rx: no pbuf\n");
|
|
|
|
/* no pbuf, discard data from DM9000 */
|
|
data = &dummy;
|
|
while (rx_len)
|
|
{
|
|
*data = DM9000_inw(DM9000_DATA_BASE);
|
|
rx_len -= 2;
|
|
}
|
|
}
|
|
|
|
if ((rx_status & 0xbf00) || (rx_len < 0x40)
|
|
|| (rx_len > DM9000_PKT_MAX))
|
|
{
|
|
rt_kprintf("rx error: status %04x, rx_len: %d\n", rx_status, rx_len);
|
|
|
|
if (rx_status & 0x100)
|
|
{
|
|
rt_kprintf("rx fifo error\n");
|
|
}
|
|
if (rx_status & 0x200)
|
|
{
|
|
rt_kprintf("rx crc error\n");
|
|
}
|
|
if (rx_status & 0x8000)
|
|
{
|
|
rt_kprintf("rx length error\n");
|
|
}
|
|
if (rx_len > DM9000_PKT_MAX)
|
|
{
|
|
rt_kprintf("rx length too big\n");
|
|
|
|
/* RESET device */
|
|
dm9000_io_write(DM9000_NCR, NCR_RST);
|
|
rt_thread_delay(1); /* delay 5ms */
|
|
}
|
|
|
|
/* it issues an error, release pbuf */
|
|
if (p != RT_NULL) pbuf_free(p);
|
|
p = RT_NULL;
|
|
|
|
goto __error_retry;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/* clear packet received latch status */
|
|
dm9000_io_write(DM9000_ISR, ISR_PTS);
|
|
|
|
/* restore receive interrupt */
|
|
dm9000_device.imr_all = IMR_PAR | IMR_PTM | IMR_PRM;
|
|
dm9000_io_write(DM9000_IMR, dm9000_device.imr_all);
|
|
}
|
|
|
|
/* unlock DM9000 device */
|
|
rt_sem_release(&sem_lock);
|
|
|
|
return p;
|
|
}
|
|
|
|
#define B4_Tacs 0x0
|
|
#define B4_Tcos 0x0
|
|
#define B4_Tacc 0x7
|
|
#define B4_Tcoh 0x0
|
|
#define B4_Tah 0x0
|
|
#define B4_Tacp 0x0
|
|
#define B4_PMC 0x0
|
|
|
|
void rt_hw_dm9000_init()
|
|
{
|
|
/* Set GPF7 as EINT7 */
|
|
GPFCON = GPFCON & (~(3 << 14)) | (2 << 14);
|
|
GPFUP = GPFUP | (1 << 7);
|
|
/* EINT7 High level interrupt */
|
|
EXTINT0 = (EXTINT0 & (~(0x7 << 28))) | (0x1 << 28);
|
|
/* Enable EINT7 */
|
|
EINTMASK = EINTMASK & (~(1<<7));
|
|
/* Set GPA15 as nGCS4 */
|
|
GPACON |= 1 << 15;
|
|
/* DM9000 width 16, wait enable */
|
|
BWSCON = BWSCON & (~(0x7<<16)) | (0x5<<16);
|
|
BANKCON4 = (1<<13) | (1<<11) | (0x6<<8) | (1<<6) | (1<<4) | (0<<2) | (0);
|
|
|
|
rt_sem_init(&sem_ack, "tx_ack", 1, RT_IPC_FLAG_FIFO);
|
|
rt_sem_init(&sem_lock, "eth_lock", 1, RT_IPC_FLAG_FIFO);
|
|
|
|
dm9000_device.type = TYPE_DM9000A;
|
|
dm9000_device.mode = DM9000_AUTO;
|
|
dm9000_device.packet_cnt = 0;
|
|
dm9000_device.queue_packet_len = 0;
|
|
|
|
/*
|
|
* SRAM Tx/Rx pointer automatically return to start address,
|
|
* Packet Transmitted, Packet Received
|
|
*/
|
|
dm9000_device.imr_all = IMR_PAR | IMR_PTM | IMR_PRM;
|
|
|
|
dm9000_device.dev_addr[0] = 0x01;
|
|
dm9000_device.dev_addr[1] = 0x60;
|
|
dm9000_device.dev_addr[2] = 0x6E;
|
|
dm9000_device.dev_addr[3] = 0x11;
|
|
dm9000_device.dev_addr[4] = 0x02;
|
|
dm9000_device.dev_addr[5] = 0x0F;
|
|
|
|
dm9000_device.parent.parent.init = rt_dm9000_init;
|
|
dm9000_device.parent.parent.open = rt_dm9000_open;
|
|
dm9000_device.parent.parent.close = rt_dm9000_close;
|
|
dm9000_device.parent.parent.read = rt_dm9000_read;
|
|
dm9000_device.parent.parent.write = rt_dm9000_write;
|
|
dm9000_device.parent.parent.control = rt_dm9000_control;
|
|
dm9000_device.parent.parent.user_data = RT_NULL;
|
|
|
|
dm9000_device.parent.eth_rx = rt_dm9000_rx;
|
|
dm9000_device.parent.eth_tx = rt_dm9000_tx;
|
|
|
|
eth_device_init(&(dm9000_device.parent), "e0");
|
|
|
|
/* instal interrupt */
|
|
rt_hw_interrupt_install(INTEINT4_7, rt_dm9000_isr, RT_NULL);
|
|
rt_hw_interrupt_umask(INTEINT4_7);
|
|
}
|
|
|
|
void dm9000a(void)
|
|
{
|
|
rt_kprintf("\n");
|
|
rt_kprintf("NCR (0x00): %02x\n", dm9000_io_read(DM9000_NCR));
|
|
rt_kprintf("NSR (0x01): %02x\n", dm9000_io_read(DM9000_NSR));
|
|
rt_kprintf("TCR (0x02): %02x\n", dm9000_io_read(DM9000_TCR));
|
|
rt_kprintf("TSRI (0x03): %02x\n", dm9000_io_read(DM9000_TSR1));
|
|
rt_kprintf("TSRII (0x04): %02x\n", dm9000_io_read(DM9000_TSR2));
|
|
rt_kprintf("RCR (0x05): %02x\n", dm9000_io_read(DM9000_RCR));
|
|
rt_kprintf("RSR (0x06): %02x\n", dm9000_io_read(DM9000_RSR));
|
|
rt_kprintf("ORCR (0x07): %02x\n", dm9000_io_read(DM9000_ROCR));
|
|
rt_kprintf("CRR (0x2C): %02x\n", dm9000_io_read(DM9000_CHIPR));
|
|
rt_kprintf("CSCR (0x31): %02x\n", dm9000_io_read(DM9000_CSCR));
|
|
rt_kprintf("RCSSR (0x32): %02x\n", dm9000_io_read(DM9000_RCSSR));
|
|
rt_kprintf("ISR (0xFE): %02x\n", dm9000_io_read(DM9000_ISR));
|
|
rt_kprintf("IMR (0xFF): %02x\n", dm9000_io_read(DM9000_IMR));
|
|
rt_kprintf("\n");
|
|
}
|
|
|
|
#ifdef RT_USING_FINSH
|
|
#include <finsh.h>
|
|
FINSH_FUNCTION_EXPORT(dm9000a, dm9000a register dump);
|
|
#endif
|