rt-thread/bsp/simulator/rtconfig.h

225 lines
6.1 KiB
C

/* RT-Thread config file */
#ifndef __RTTHREAD_CFG_H__
#define __RTTHREAD_CFG_H__
/* SECTION: port for visual studio */
#ifdef _MSC_VER
#undef RT_USING_NEWLIB
#undef RT_USING_MINILIBC
#define NORESOURCE //RT_VESRION in winuser.h
#define _CRT_ERRNO_DEFINED //errno macro redefinition
#define HEAP_SIZE (1024*1024*2)
/* disable some warning in MSC */
#pragma warning(disable:4273) /* to ignore: warning C4273: inconsistent dll linkage */
#pragma warning(disable:4312) /* to ignore: warning C4312: 'type cast' : conversion from 'rt_uint32_t' to 'rt_uint32_t *' */
#pragma warning(disable:4311) /* to ignore: warning C4311: 'type cast' : pointer truncation from 'short *__w64 ' to 'long' */
#pragma warning(disable:4996) /* to ignore: warning C4996: The POSIX name for this item is deprecated. */
#pragma warning(disable:4267) /* to ignore: warning C4267: conversion from 'size_t' to 'rt_size_t', possible loss of data */
#pragma warning(disable:4244) /* to ignore: warning C4244: '=' : conversion from '__w64 int' to 'rt_size_t', possible loss of data */
#endif
/* SECTION: basic kernel options */
/* RT_NAME_MAX*/
#define RT_NAME_MAX 8
/* RT_ALIGN_SIZE*/
#define RT_ALIGN_SIZE 4
/* PRIORITY_MAX */
#define RT_THREAD_PRIORITY_MAX 32
/* Tick per Second */
#define RT_TICK_PER_SECOND 1000
/* SECTION: RT_DEBUG */
/* Thread Debug */
#define RT_DEBUG
#define RT_THREAD_DEBUG
#define RT_USING_OVERFLOW_CHECK
/* Using Hook */
#define RT_USING_HOOK
/* Using Software Timer */
/* #define RT_USING_TIMER_SOFT */
#define RT_TIMER_THREAD_PRIO 4
#define RT_TIMER_THREAD_STACK_SIZE 512
#define RT_TIMER_TICK_PER_SECOND 10
/* SECTION: IPC */
/* Using Semaphore*/
#define RT_USING_SEMAPHORE
/* Using Mutex */
#define RT_USING_MUTEX
/* Using Event */
#define RT_USING_EVENT
/* Using MailBox */
#define RT_USING_MAILBOX
/* Using Message Queue */
#define RT_USING_MESSAGEQUEUE
/* SECTION: Memory Management */
/* Using Memory Pool Management*/
/* #define RT_USING_MEMPOOL */
/* Using Dynamic Heap Management */
#define RT_USING_HEAP
/* Using Small MM */
#define RT_USING_SMALL_MEM
/* #define RT_TINY_SIZE */
/* SECTION: Device System */
/* Using Device System */
#define RT_USING_DEVICE
/* #define RT_USING_UART1 */
/* SECTION: Console options */
#define RT_USING_CONSOLE
/* the buffer size of console*/
#define RT_CONSOLEBUF_SIZE 128
#define RT_CONSOLE_DEVICE_NAME "sci0"
/* SECTION: component options */
#define RT_USING_COMPONENTS_INIT
/* SECTION: MTD interface options */
/* using mtd nand flash */
#define RT_USING_MTD_NAND
/* using mtd nor flash */
#define RT_USING_MTD_NOR
/* SECTION: finsh, a C-Express shell */
#define RT_USING_FINSH
/* Using symbol table */
#define FINSH_USING_SYMTAB
#define FINSH_USING_DESCRIPTION
/* SECTION: device file system */
#define RT_USING_DFS
/* DFS: ELM FATFS options */
#define RT_USING_DFS_ELMFAT
#define RT_DFS_ELM_WORD_ACCESS
/* Reentrancy (thread safe) of the FatFs module. */
#define RT_DFS_ELM_REENTRANT
/* Number of volumes (logical drives) to be used. */
#define RT_DFS_ELM_DRIVES 2
/* #define RT_DFS_ELM_USE_LFN 1 */
#define RT_DFS_ELM_MAX_LFN 255
/* Maximum sector size to be handled. */
#define RT_DFS_ELM_MAX_SECTOR_SIZE 512
/* DFS: network file system options */
#define RT_USING_DFS_NFS
/* DFS: uffs nand file system options */
#define RT_USING_DFS_UFFS
/* configuration for uffs, more to see dfs_uffs.h and uffs_config.h */
/* use ecc soft, the uffs will do all the things about ecc */
#define RT_CONFIG_UFFS_ECC_MODE UFFS_ECC_HW_AUTO
/* enable this ,you need provide a mark_badblock/check_block function */
//#define RT_UFFS_USE_CHECK_MARK_FUNCITON
/* DFS: uffs nor flash file system options */
#define RT_USING_DFS_JFFS2
/* DFS: windows share directory mounted to rt-thread/dfs */
/* only used in bsp/simulator */
#define RT_USING_DFS_WINSHAREDIR
/* the max number of mounted file system */
#define DFS_FILESYSTEMS_MAX 4
/* the max number of opened files */
#define DFS_FD_MAX 4
/* SECTION: lwip, a lightweight TCP/IP protocol stack */
/* #define RT_USING_LWIP */
/* LwIP uses RT-Thread Memory Management */
#define RT_LWIP_USING_RT_MEM
/* Enable ICMP protocol*/
#define RT_LWIP_ICMP
/* Enable UDP protocol*/
#define RT_LWIP_UDP
/* Enable TCP protocol*/
#define RT_LWIP_TCP
/* Enable DNS */
#define RT_LWIP_DNS
/* the number of simultaneously active TCP connections*/
#define RT_LWIP_TCP_PCB_NUM 5
/* Using DHCP */
/* #define RT_LWIP_DHCP */
/* ip address of target*/
#define RT_LWIP_IPADDR0 192
#define RT_LWIP_IPADDR1 168
#define RT_LWIP_IPADDR2 126
#define RT_LWIP_IPADDR3 30
/* gateway address of target*/
#define RT_LWIP_GWADDR0 192
#define RT_LWIP_GWADDR1 168
#define RT_LWIP_GWADDR2 126
#define RT_LWIP_GWADDR3 1
/* mask address of target*/
#define RT_LWIP_MSKADDR0 255
#define RT_LWIP_MSKADDR1 255
#define RT_LWIP_MSKADDR2 255
#define RT_LWIP_MSKADDR3 0
/* tcp thread options */
#define RT_LWIP_TCPTHREAD_PRIORITY 12
#define RT_LWIP_TCPTHREAD_MBOX_SIZE 10
#define RT_LWIP_TCPTHREAD_STACKSIZE 1024
/* Ethernet if thread options */
#define RT_LWIP_ETHTHREAD_PRIORITY 15
#define RT_LWIP_ETHTHREAD_MBOX_SIZE 10
#define RT_LWIP_ETHTHREAD_STACKSIZE 512
/* TCP sender buffer space */
#define RT_LWIP_TCP_SND_BUF 8192
/* TCP receive window. */
#define RT_LWIP_TCP_WND 8192
/* SECTION: RT-Thread/GUI */
#define RT_USING_RTGUI
/* name length of RTGUI object */
#define RTGUI_NAME_MAX 12
/* support 16 weight font */
#define RTGUI_USING_FONT16
/* support Chinese font */
#define RTGUI_USING_FONTHZ
/* use DFS as file interface */
#define RTGUI_USING_DFS_FILERW
/* use font file as Chinese font */
/* #define RTGUI_USING_HZ_FILE */
/* use Chinese bitmap font */
#define RTGUI_USING_HZ_BMP
/* use small size in RTGUI */
#define RTGUI_USING_SMALL_SIZE
/* use mouse cursor */
/* #define RTGUI_USING_MOUSE_CURSOR */
/* default font size in RTGUI */
#define RTGUI_DEFAULT_FONT_SIZE 16
/* image support */
#define RTGUI_IMAGE_XPM
#define RTGUI_IMAGE_BMP
/* #define RTGUI_IMAGE_JPEG */
/* #define RTGUI_IMAGE_PNG */
#define RTGUI_USING_NOTEBOOK_IMAGE
#endif