536 lines
15 KiB
C
536 lines
15 KiB
C
/*
|
|
* Copyright (c) 2006-2023, RT-Thread Development Team
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*
|
|
* Change Logs:
|
|
* Date Author Notes
|
|
* 2022-08-27 liYony the first version
|
|
*/
|
|
|
|
#include "board.h"
|
|
#include <rtdevice.h>
|
|
#include <drv_usart.h>
|
|
|
|
#ifdef RT_USING_SERIAL
|
|
|
|
//#define DRV_DEBUG
|
|
#define LOG_TAG "drv.uart"
|
|
#include <drv_log.h>
|
|
|
|
#if !defined(BSP_USING_UART1) && !defined(BSP_USING_UART2) && !defined(BSP_USING_UART3) && !defined(BSP_USING_UART4) && \
|
|
!defined(BSP_USING_UART5) && !defined(BSP_USING_UART6) && !defined(BSP_USING_UART7) && !defined(BSP_USING_UART8)
|
|
#error "Please define at least one BSP_USING_UARTx"
|
|
/* this driver can be disabled at menuconfig -> RT-Thread Components -> Device Drivers */
|
|
#endif
|
|
|
|
enum
|
|
{
|
|
#ifdef BSP_USING_UART1
|
|
UART1_INDEX,
|
|
#endif
|
|
#ifdef BSP_USING_UART2
|
|
UART2_INDEX,
|
|
#endif
|
|
#ifdef BSP_USING_UART3
|
|
UART3_INDEX,
|
|
#endif
|
|
#ifdef BSP_USING_UART4
|
|
UART4_INDEX,
|
|
#endif
|
|
#ifdef BSP_USING_UART5
|
|
UART5_INDEX,
|
|
#endif
|
|
#ifdef BSP_USING_UART6
|
|
UART6_INDEX,
|
|
#endif
|
|
#ifdef BSP_USING_UART7
|
|
UART7_INDEX,
|
|
#endif
|
|
#ifdef BSP_USING_UART8
|
|
UART8_INDEX,
|
|
#endif
|
|
};
|
|
|
|
/* If you want to use other serial ports, please follow UART1 to complete other
|
|
serial ports. For clock configuration, */
|
|
static struct ch32_uart_hw_config uart_hw_config[] =
|
|
{
|
|
#ifdef BSP_USING_UART1
|
|
{
|
|
/* clock configuration, please refer to ch32v30x_rcc.h */
|
|
RCC_APB2Periph_USART1, RCC_APB2Periph_GPIOA,
|
|
/* GPIO configuration : TX_Port,TX_Pin, RX_Port,RX_Pin */
|
|
GPIOA, GPIO_Pin_9, /* Tx */GPIOA, GPIO_Pin_10, /* Rx */
|
|
/* Whether to enable port remapping, you can refer to ch32v30x_gpio.h file,
|
|
for example, USART1 needs to be turned on, you can use GPIO_Remap_USART1 */
|
|
GPIO_Remap_NONE,
|
|
},
|
|
#endif
|
|
#ifdef BSP_USING_UART2
|
|
{
|
|
/* clock configuration, please refer to ch32v30x_rcc.h */
|
|
RCC_APB1Periph_USART2, RCC_APB2Periph_GPIOA,
|
|
/* GPIO configuration : TX_Port,TX_Pin, RX_Port,RX_Pin */
|
|
GPIOA, GPIO_Pin_2, /* Tx */GPIOA, GPIO_Pin_3, /* Rx */
|
|
/* Whether to enable port remapping, you can refer to ch32v30x_gpio.h file,
|
|
for example, USART1 needs to be turned on, you can use GPIO_Remap_USART1 */
|
|
GPIO_Remap_NONE,
|
|
},
|
|
#endif
|
|
#ifdef BSP_USING_UART3
|
|
{
|
|
/* clock configuration, please refer to ch32v30x_rcc.h */
|
|
RCC_APB1Periph_USART3, RCC_APB2Periph_GPIOB,
|
|
/* GPIO configuration : TX_Port,TX_Pin, RX_Port,RX_Pin */
|
|
GPIOB, GPIO_Pin_10, /* Tx */GPIOB, GPIO_Pin_11, /* Rx */
|
|
/* Whether to enable port remapping, you can refer to ch32v30x_gpio.h file,
|
|
for example, USART1 needs to be turned on, you can use GPIO_Remap_USART1 */
|
|
GPIO_Remap_NONE,
|
|
},
|
|
#endif
|
|
#ifdef BSP_USING_UART4
|
|
{
|
|
/* clock configuration, please refer to ch32v30x_rcc.h */
|
|
RCC_APB1Periph_UART4, RCC_APB2Periph_GPIOC,
|
|
/* GPIO configuration : TX_Port,TX_Pin, RX_Port,RX_Pin */
|
|
GPIOC, GPIO_Pin_10, /* Tx */GPIOC, GPIO_Pin_11, /* Rx */
|
|
/* Whether to enable port remapping, you can refer to ch32v30x_gpio.h file,
|
|
for example, USART1 needs to be turned on, you can use GPIO_Remap_USART1 */
|
|
GPIO_Remap_NONE,
|
|
},
|
|
#endif
|
|
#ifdef BSP_USING_UART5
|
|
{
|
|
/* clock configuration, please refer to ch32v30x_rcc.h */
|
|
RCC_APB1Periph_UART5, RCC_APB2Periph_GPIOC|RCC_APB2Periph_GPIOD,
|
|
/* GPIO configuration : TX_Port,TX_Pin, RX_Port,RX_Pin */
|
|
GPIOC, GPIO_Pin_12, /* Tx */GPIOD, GPIO_Pin_2, /* Rx */
|
|
/* Whether to enable port remapping, you can refer to ch32v30x_gpio.h file,
|
|
for example, USART1 needs to be turned on, you can use GPIO_Remap_USART1 */
|
|
GPIO_Remap_NONE,
|
|
},
|
|
#endif
|
|
#ifdef BSP_USING_UART6
|
|
{
|
|
/* clock configuration, please refer to ch32v30x_rcc.h */
|
|
RCC_APB1Periph_UART6, RCC_APB2Periph_GPIOC,
|
|
/* GPIO configuration : TX_Port,TX_Pin, RX_Port,RX_Pin */
|
|
GPIOC, GPIO_Pin_0, /* Tx */GPIOC, GPIO_Pin_1, /* Rx */
|
|
/* Whether to enable port remapping, you can refer to ch32v30x_gpio.h file,
|
|
for example, USART1 needs to be turned on, you can use GPIO_Remap_USART1 */
|
|
GPIO_Remap_NONE,
|
|
},
|
|
#endif
|
|
#ifdef BSP_USING_UART7
|
|
{
|
|
/* clock configuration, please refer to ch32v30x_rcc.h */
|
|
RCC_APB1Periph_UART7, RCC_APB2Periph_GPIOC,
|
|
/* GPIO configuration : TX_Port,TX_Pin, RX_Port,RX_Pin */
|
|
GPIOC, GPIO_Pin_2, /* Tx */GPIOC, GPIO_Pin_3, /* Rx */
|
|
/* Whether to enable port remapping, you can refer to ch32v30x_gpio.h file,
|
|
for example, USART1 needs to be turned on, you can use GPIO_Remap_USART1 */
|
|
GPIO_Remap_NONE,
|
|
},
|
|
#endif
|
|
#ifdef BSP_USING_UART8
|
|
{
|
|
/* clock configuration, please refer to ch32v30x_rcc.h */
|
|
RCC_APB1Periph_UART8, RCC_APB2Periph_GPIOC,
|
|
/* GPIO configuration : TX_Port,TX_Pin, RX_Port,RX_Pin */
|
|
GPIOC, GPIO_Pin_4, /* Tx */GPIOC, GPIO_Pin_5, /* Rx */
|
|
/* Whether to enable port remapping, you can refer to ch32v30x_gpio.h file,
|
|
for example, USART1 needs to be turned on, you can use GPIO_Remap_USART1 */
|
|
GPIO_Remap_NONE,
|
|
},
|
|
#endif
|
|
};
|
|
|
|
static struct ch32_uart_config uart_config[] =
|
|
{
|
|
#ifdef BSP_USING_UART1
|
|
{
|
|
"uart1",
|
|
USART1,
|
|
USART1_IRQn,
|
|
},
|
|
#endif
|
|
#ifdef BSP_USING_UART2
|
|
{
|
|
"uart2",
|
|
USART2,
|
|
USART2_IRQn,
|
|
},
|
|
#endif
|
|
#ifdef BSP_USING_UART3
|
|
{
|
|
"uart3",
|
|
USART3,
|
|
USART3_IRQn,
|
|
},
|
|
#endif
|
|
#ifdef BSP_USING_UART4
|
|
{
|
|
"uart4",
|
|
UART4,
|
|
UART4_IRQn,
|
|
},
|
|
#endif
|
|
#ifdef BSP_USING_UART5
|
|
{
|
|
"uart5",
|
|
UART5,
|
|
UART5_IRQn,
|
|
},
|
|
#endif
|
|
#ifdef BSP_USING_UART6
|
|
{
|
|
"uart6",
|
|
UART6,
|
|
UART6_IRQn,
|
|
},
|
|
#endif
|
|
#ifdef BSP_USING_UART7
|
|
{
|
|
"uart7",
|
|
UART7,
|
|
UART7_IRQn,
|
|
},
|
|
#endif
|
|
#ifdef BSP_USING_UART8
|
|
{
|
|
"uart8",
|
|
UART8,
|
|
UART8_IRQn,
|
|
},
|
|
#endif
|
|
};
|
|
|
|
static struct ch32_uart uart_obj[sizeof(uart_config) / sizeof(uart_config[0])] = {0};
|
|
|
|
static rt_err_t ch32_configure(struct rt_serial_device *serial, struct serial_configure *cfg)
|
|
{
|
|
struct ch32_uart *uart;
|
|
GPIO_InitTypeDef GPIO_InitStructure={0};
|
|
|
|
RT_ASSERT(serial != RT_NULL);
|
|
RT_ASSERT(cfg != RT_NULL);
|
|
|
|
uart = (struct ch32_uart *) serial->parent.user_data;
|
|
|
|
uart->Init.USART_BaudRate = cfg->baud_rate;
|
|
uart->Init.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
|
|
uart->Init.USART_Mode = USART_Mode_Rx|USART_Mode_Tx;
|
|
|
|
switch (cfg->data_bits)
|
|
{
|
|
case DATA_BITS_8:
|
|
uart->Init.USART_WordLength = USART_WordLength_8b;
|
|
break;
|
|
case DATA_BITS_9:
|
|
uart->Init.USART_WordLength = USART_WordLength_9b;
|
|
break;
|
|
default:
|
|
uart->Init.USART_WordLength = USART_WordLength_8b;
|
|
break;
|
|
}
|
|
|
|
switch (cfg->stop_bits)
|
|
{
|
|
case STOP_BITS_1:
|
|
uart->Init.USART_StopBits = USART_StopBits_1;
|
|
break;
|
|
case STOP_BITS_2:
|
|
uart->Init.USART_StopBits = USART_StopBits_2;
|
|
break;
|
|
default:
|
|
uart->Init.USART_StopBits = USART_StopBits_1;
|
|
break;
|
|
}
|
|
switch (cfg->parity)
|
|
{
|
|
case PARITY_NONE:
|
|
uart->Init.USART_Parity = USART_Parity_No;
|
|
break;
|
|
case PARITY_ODD:
|
|
uart->Init.USART_Parity = USART_Parity_Odd;
|
|
break;
|
|
case PARITY_EVEN:
|
|
uart->Init.USART_Parity = USART_Parity_Even;
|
|
break;
|
|
default:
|
|
uart->Init.USART_Parity = USART_Parity_No;
|
|
break;
|
|
}
|
|
|
|
/* UART hardware configuration, including clock and GPIO, etc. */
|
|
RCC_APB2PeriphClockCmd(uart->hw_config->gpio_periph_clock, ENABLE);
|
|
if(uart->config->Instance == USART1)
|
|
{
|
|
RCC_APB2PeriphClockCmd(uart->hw_config->uart_periph_clock, ENABLE);
|
|
}
|
|
else
|
|
{
|
|
RCC_APB1PeriphClockCmd(uart->hw_config->uart_periph_clock, ENABLE);
|
|
}
|
|
|
|
if(uart->hw_config->remap != GPIO_Remap_NONE)
|
|
{
|
|
RCC_APB2PeriphClockCmd(RCC_APB2Periph_AFIO, ENABLE);
|
|
GPIO_PinRemapConfig(uart->hw_config->remap, ENABLE);
|
|
}
|
|
GPIO_InitStructure.GPIO_Pin = uart->hw_config->tx_gpio_pin;
|
|
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
|
|
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
|
|
GPIO_Init(uart->hw_config->tx_gpio_port, &GPIO_InitStructure);
|
|
GPIO_InitStructure.GPIO_Pin = uart->hw_config->rx_gpio_pin;
|
|
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
|
|
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
|
|
GPIO_Init(uart->hw_config->rx_gpio_port, &GPIO_InitStructure);
|
|
|
|
USART_Init(uart->config->Instance,&uart->Init);
|
|
USART_Cmd(uart->config->Instance, ENABLE);
|
|
|
|
return RT_EOK;
|
|
}
|
|
|
|
static rt_err_t ch32_control(struct rt_serial_device *serial, int cmd, void *arg)
|
|
{
|
|
struct ch32_uart *uart;
|
|
RT_ASSERT(serial != RT_NULL);
|
|
uart = (struct ch32_uart *)serial->parent.user_data;
|
|
switch (cmd)
|
|
{
|
|
/* disable interrupt */
|
|
case RT_DEVICE_CTRL_CLR_INT:
|
|
/* disable rx irq */
|
|
NVIC_DisableIRQ(uart->config->irq_type);
|
|
/* disable interrupt */
|
|
USART_ITConfig(uart->config->Instance,USART_IT_RXNE,DISABLE);
|
|
break;
|
|
/* enable interrupt */
|
|
case RT_DEVICE_CTRL_SET_INT:
|
|
/* enable rx irq */
|
|
NVIC_EnableIRQ(uart->config->irq_type);
|
|
/* enable interrupt */
|
|
USART_ITConfig(uart->config->Instance, USART_IT_RXNE,ENABLE);
|
|
break;
|
|
}
|
|
return RT_EOK;
|
|
}
|
|
|
|
static int ch32_putc(struct rt_serial_device *serial, char c)
|
|
{
|
|
struct ch32_uart *uart;
|
|
RT_ASSERT(serial != RT_NULL);
|
|
uart = (struct ch32_uart *)serial->parent.user_data;
|
|
while (USART_GetFlagStatus(uart->config->Instance, USART_FLAG_TC) == RESET);
|
|
uart->config->Instance->DATAR = c;
|
|
return 1;
|
|
}
|
|
|
|
static int ch32_getc(struct rt_serial_device *serial)
|
|
{
|
|
int ch;
|
|
struct ch32_uart *uart;
|
|
RT_ASSERT(serial != RT_NULL);
|
|
uart = (struct ch32_uart *)serial->parent.user_data;
|
|
ch = -1;
|
|
if (USART_GetFlagStatus(uart->config->Instance, USART_FLAG_RXNE) != RESET)
|
|
{
|
|
ch = uart->config->Instance->DATAR & 0xff;
|
|
}
|
|
return ch;
|
|
}
|
|
|
|
static rt_ssize_t ch32dma_transmit(struct rt_serial_device *serial, rt_uint8_t *buf, rt_size_t size, int direction)
|
|
{
|
|
return RT_EOK;
|
|
}
|
|
|
|
static void uart_isr(struct rt_serial_device *serial)
|
|
{
|
|
struct ch32_uart *uart = (struct ch32_uart *) serial->parent.user_data;
|
|
RT_ASSERT(uart != RT_NULL);
|
|
if (USART_GetITStatus(uart->config->Instance, USART_IT_RXNE) != RESET)
|
|
{
|
|
rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_IND);
|
|
USART_ClearITPendingBit(uart->config->Instance, USART_IT_RXNE);
|
|
}
|
|
}
|
|
|
|
static const struct rt_uart_ops ch32_uart_ops =
|
|
{
|
|
ch32_configure,
|
|
ch32_control,
|
|
ch32_putc,
|
|
ch32_getc,
|
|
ch32dma_transmit
|
|
};
|
|
|
|
#ifdef BSP_USING_UART1
|
|
#if defined (SOC_RISCV_SERIES_CH32V2)
|
|
void USART1_IRQHandler(void) __attribute__((interrupt()));
|
|
#else
|
|
void USART1_IRQHandler(void) __attribute__((interrupt("WCH-Interrupt-fast")));
|
|
#endif
|
|
void USART1_IRQHandler(void)
|
|
{
|
|
GET_INT_SP();
|
|
rt_interrupt_enter();
|
|
uart_isr(&(uart_obj[UART1_INDEX].serial));
|
|
rt_interrupt_leave();
|
|
FREE_INT_SP();
|
|
}
|
|
#endif
|
|
|
|
#ifdef BSP_USING_UART2
|
|
#if defined (SOC_RISCV_SERIES_CH32V2)
|
|
void USART2_IRQHandler(void) __attribute__((interrupt()));
|
|
#else
|
|
void USART2_IRQHandler(void) __attribute__((interrupt("WCH-Interrupt-fast")));
|
|
#endif
|
|
void USART2_IRQHandler(void)
|
|
{
|
|
GET_INT_SP();
|
|
rt_interrupt_enter();
|
|
uart_isr(&(uart_obj[UART2_INDEX].serial));
|
|
rt_interrupt_leave();
|
|
FREE_INT_SP();
|
|
}
|
|
#endif
|
|
|
|
#ifdef BSP_USING_UART3
|
|
#if defined (SOC_RISCV_SERIES_CH32V2)
|
|
void USART3_IRQHandler(void) __attribute__((interrupt()));
|
|
#else
|
|
void USART3_IRQHandler(void) __attribute__((interrupt("WCH-Interrupt-fast")));
|
|
#endif
|
|
void USART3_IRQHandler(void)
|
|
{
|
|
GET_INT_SP();
|
|
rt_interrupt_enter();
|
|
uart_isr(&(uart_obj[UART3_INDEX].serial));
|
|
rt_interrupt_leave();
|
|
FREE_INT_SP();
|
|
}
|
|
#endif
|
|
|
|
#ifdef BSP_USING_UART4
|
|
#if defined (SOC_RISCV_SERIES_CH32V2)
|
|
void USART4_IRQHandler(void) __attribute__((interrupt()));
|
|
#else
|
|
void USART4_IRQHandler(void) __attribute__((interrupt("WCH-Interrupt-fast")));
|
|
#endif
|
|
void UART4_IRQHandler(void)
|
|
{
|
|
GET_INT_SP();
|
|
rt_interrupt_enter();
|
|
uart_isr(&(uart_obj[UART4_INDEX].serial));
|
|
rt_interrupt_leave();
|
|
FREE_INT_SP();
|
|
}
|
|
#endif
|
|
|
|
#ifdef BSP_USING_UART5
|
|
#if defined (SOC_RISCV_SERIES_CH32V2)
|
|
void USART5_IRQHandler(void) __attribute__((interrupt()));
|
|
#else
|
|
void USART5_IRQHandler(void) __attribute__((interrupt("WCH-Interrupt-fast")));
|
|
#endif
|
|
void UART5_IRQHandler(void)
|
|
{
|
|
GET_INT_SP();
|
|
rt_interrupt_enter();
|
|
uart_isr(&(uart_obj[UART5_INDEX].serial));
|
|
rt_interrupt_leave();
|
|
FREE_INT_SP();
|
|
}
|
|
#endif
|
|
|
|
#ifdef BSP_USING_UART6
|
|
#if defined (SOC_RISCV_SERIES_CH32V2)
|
|
void USART6_IRQHandler(void) __attribute__((interrupt()));
|
|
#else
|
|
void USART6_IRQHandler(void) __attribute__((interrupt("WCH-Interrupt-fast")));
|
|
#endif
|
|
void UART6_IRQHandler(void)
|
|
{
|
|
GET_INT_SP();
|
|
rt_interrupt_enter();
|
|
uart_isr(&(uart_obj[UART6_INDEX].serial));
|
|
rt_interrupt_leave();
|
|
FREE_INT_SP();
|
|
}
|
|
#endif
|
|
|
|
#ifdef BSP_USING_UART7
|
|
#if defined (SOC_RISCV_SERIES_CH32V2)
|
|
void USART7_IRQHandler(void) __attribute__((interrupt()));
|
|
#else
|
|
void USART7_IRQHandler(void) __attribute__((interrupt("WCH-Interrupt-fast")));
|
|
#endif
|
|
void UART7_IRQHandler(void)
|
|
{
|
|
GET_INT_SP();
|
|
rt_interrupt_enter();
|
|
uart_isr(&(uart_obj[UART7_INDEX].serial));
|
|
rt_interrupt_leave();
|
|
FREE_INT_SP();
|
|
}
|
|
#endif
|
|
|
|
#ifdef BSP_USING_UART8
|
|
#if defined (SOC_RISCV_SERIES_CH32V2)
|
|
void USART8_IRQHandler(void) __attribute__((interrupt()));
|
|
#else
|
|
void USART8_IRQHandler(void) __attribute__((interrupt("WCH-Interrupt-fast")));
|
|
#endif
|
|
void UART8_IRQHandler(void)
|
|
{
|
|
GET_INT_SP();
|
|
rt_interrupt_enter();
|
|
uart_isr(&(uart_obj[UART8_INDEX].serial));
|
|
rt_interrupt_leave();
|
|
FREE_INT_SP();
|
|
}
|
|
#endif
|
|
|
|
int rt_hw_usart_init(void)
|
|
{
|
|
rt_size_t obj_num = sizeof(uart_obj) / sizeof(struct ch32_uart);
|
|
struct serial_configure config = RT_SERIAL_CONFIG_DEFAULT;
|
|
rt_err_t result = 0;
|
|
|
|
for (int i = 0; i < obj_num; i++)
|
|
{
|
|
/* init UART object */
|
|
uart_obj[i].config = &uart_config[i];
|
|
uart_obj[i].hw_config = &uart_hw_config[i];
|
|
uart_obj[i].serial.ops = &ch32_uart_ops;
|
|
uart_obj[i].serial.config = config;
|
|
/* Hardware initialization is required, otherwise it
|
|
will not be registered into the device framework */
|
|
if(uart_obj[i].hw_config->gpio_periph_clock == 0)
|
|
{
|
|
LOG_E("You did not perform hardware initialization for %s", uart_obj[i].config->name);
|
|
continue;
|
|
}
|
|
if(uart_obj[i].hw_config->uart_periph_clock == 0)
|
|
{
|
|
LOG_E("You did not perform hardware initialization for %s", uart_obj[i].config->name);
|
|
continue;
|
|
}
|
|
/* register UART device */
|
|
result = rt_hw_serial_register(&uart_obj[i].serial, uart_obj[i].config->name,
|
|
RT_DEVICE_FLAG_RDWR
|
|
| RT_DEVICE_FLAG_INT_RX
|
|
, &uart_obj[i]);
|
|
RT_ASSERT(result == RT_EOK);
|
|
}
|
|
|
|
return result;
|
|
}
|
|
|
|
#endif /* RT_USING_SERIAL */
|