950 lines
34 KiB
C
950 lines
34 KiB
C
/*
|
|
* Copyright (c) 2015-2016, Freescale Semiconductor, Inc.
|
|
* Copyright 2016-2018 NXP
|
|
* All rights reserved.
|
|
*
|
|
* SPDX-License-Identifier: BSD-3-Clause
|
|
*/
|
|
|
|
#include "fsl_flexio_uart.h"
|
|
|
|
/*******************************************************************************
|
|
* Definitions
|
|
******************************************************************************/
|
|
|
|
/* Component ID definition, used by tools. */
|
|
#ifndef FSL_COMPONENT_ID
|
|
#define FSL_COMPONENT_ID "platform.drivers.flexio_uart"
|
|
#endif
|
|
|
|
/*<! @brief uart transfer state. */
|
|
enum _flexio_uart_transfer_states
|
|
{
|
|
kFLEXIO_UART_TxIdle, /* TX idle. */
|
|
kFLEXIO_UART_TxBusy, /* TX busy. */
|
|
kFLEXIO_UART_RxIdle, /* RX idle. */
|
|
kFLEXIO_UART_RxBusy /* RX busy. */
|
|
};
|
|
|
|
/*******************************************************************************
|
|
* Prototypes
|
|
******************************************************************************/
|
|
|
|
/*!
|
|
* @brief Get the length of received data in RX ring buffer.
|
|
*
|
|
* @param handle FLEXIO UART handle pointer.
|
|
* @return Length of received data in RX ring buffer.
|
|
*/
|
|
static size_t FLEXIO_UART_TransferGetRxRingBufferLength(flexio_uart_handle_t *handle);
|
|
|
|
/*!
|
|
* @brief Check whether the RX ring buffer is full.
|
|
*
|
|
* @param handle FLEXIO UART handle pointer.
|
|
* @retval true RX ring buffer is full.
|
|
* @retval false RX ring buffer is not full.
|
|
*/
|
|
static bool FLEXIO_UART_TransferIsRxRingBufferFull(flexio_uart_handle_t *handle);
|
|
|
|
/*******************************************************************************
|
|
* Codes
|
|
******************************************************************************/
|
|
|
|
static uint32_t FLEXIO_UART_GetInstance(FLEXIO_UART_Type *base)
|
|
{
|
|
return FLEXIO_GetInstance(base->flexioBase);
|
|
}
|
|
|
|
static size_t FLEXIO_UART_TransferGetRxRingBufferLength(flexio_uart_handle_t *handle)
|
|
{
|
|
size_t size;
|
|
|
|
if (handle->rxRingBufferTail > handle->rxRingBufferHead)
|
|
{
|
|
size = (size_t)(handle->rxRingBufferHead + handle->rxRingBufferSize - handle->rxRingBufferTail);
|
|
}
|
|
else
|
|
{
|
|
size = (size_t)(handle->rxRingBufferHead - handle->rxRingBufferTail);
|
|
}
|
|
|
|
return size;
|
|
}
|
|
|
|
static bool FLEXIO_UART_TransferIsRxRingBufferFull(flexio_uart_handle_t *handle)
|
|
{
|
|
bool full;
|
|
|
|
if (FLEXIO_UART_TransferGetRxRingBufferLength(handle) == (handle->rxRingBufferSize - 1U))
|
|
{
|
|
full = true;
|
|
}
|
|
else
|
|
{
|
|
full = false;
|
|
}
|
|
|
|
return full;
|
|
}
|
|
|
|
/*!
|
|
* brief Ungates the FlexIO clock, resets the FlexIO module, configures FlexIO UART
|
|
* hardware, and configures the FlexIO UART with FlexIO UART configuration.
|
|
* The configuration structure can be filled by the user or be set with
|
|
* default values by FLEXIO_UART_GetDefaultConfig().
|
|
*
|
|
* Example
|
|
code
|
|
FLEXIO_UART_Type base = {
|
|
.flexioBase = FLEXIO,
|
|
.TxPinIndex = 0,
|
|
.RxPinIndex = 1,
|
|
.shifterIndex = {0,1},
|
|
.timerIndex = {0,1}
|
|
};
|
|
flexio_uart_config_t config = {
|
|
.enableInDoze = false,
|
|
.enableInDebug = true,
|
|
.enableFastAccess = false,
|
|
.baudRate_Bps = 115200U,
|
|
.bitCountPerChar = 8
|
|
};
|
|
FLEXIO_UART_Init(base, &config, srcClock_Hz);
|
|
endcode
|
|
*
|
|
* param base Pointer to the FLEXIO_UART_Type structure.
|
|
* param userConfig Pointer to the flexio_uart_config_t structure.
|
|
* param srcClock_Hz FlexIO source clock in Hz.
|
|
* retval kStatus_Success Configuration success
|
|
* retval kStatus_InvalidArgument Buadrate configuration out of range
|
|
*/
|
|
status_t FLEXIO_UART_Init(FLEXIO_UART_Type *base, const flexio_uart_config_t *userConfig, uint32_t srcClock_Hz)
|
|
{
|
|
assert(base && userConfig);
|
|
|
|
flexio_shifter_config_t shifterConfig;
|
|
flexio_timer_config_t timerConfig;
|
|
uint32_t ctrlReg = 0;
|
|
uint16_t timerDiv = 0;
|
|
uint16_t timerCmp = 0;
|
|
status_t result = kStatus_Success;
|
|
|
|
/* Clear the shifterConfig & timerConfig struct. */
|
|
memset(&shifterConfig, 0, sizeof(shifterConfig));
|
|
memset(&timerConfig, 0, sizeof(timerConfig));
|
|
|
|
#if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL)
|
|
/* Ungate flexio clock. */
|
|
CLOCK_EnableClock(s_flexioClocks[FLEXIO_UART_GetInstance(base)]);
|
|
#endif /* FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL */
|
|
|
|
/* Configure FLEXIO UART */
|
|
ctrlReg = base->flexioBase->CTRL;
|
|
ctrlReg &= ~(FLEXIO_CTRL_DOZEN_MASK | FLEXIO_CTRL_DBGE_MASK | FLEXIO_CTRL_FASTACC_MASK | FLEXIO_CTRL_FLEXEN_MASK);
|
|
ctrlReg |= (FLEXIO_CTRL_DBGE(userConfig->enableInDebug) | FLEXIO_CTRL_FASTACC(userConfig->enableFastAccess) |
|
|
FLEXIO_CTRL_FLEXEN(userConfig->enableUart));
|
|
if (!userConfig->enableInDoze)
|
|
{
|
|
ctrlReg |= FLEXIO_CTRL_DOZEN_MASK;
|
|
}
|
|
|
|
base->flexioBase->CTRL = ctrlReg;
|
|
|
|
/* Do hardware configuration. */
|
|
/* 1. Configure the shifter 0 for tx. */
|
|
shifterConfig.timerSelect = base->timerIndex[0];
|
|
shifterConfig.timerPolarity = kFLEXIO_ShifterTimerPolarityOnPositive;
|
|
shifterConfig.pinConfig = kFLEXIO_PinConfigOutput;
|
|
shifterConfig.pinSelect = base->TxPinIndex;
|
|
shifterConfig.pinPolarity = kFLEXIO_PinActiveHigh;
|
|
shifterConfig.shifterMode = kFLEXIO_ShifterModeTransmit;
|
|
shifterConfig.inputSource = kFLEXIO_ShifterInputFromPin;
|
|
shifterConfig.shifterStop = kFLEXIO_ShifterStopBitHigh;
|
|
shifterConfig.shifterStart = kFLEXIO_ShifterStartBitLow;
|
|
|
|
FLEXIO_SetShifterConfig(base->flexioBase, base->shifterIndex[0], &shifterConfig);
|
|
|
|
/*2. Configure the timer 0 for tx. */
|
|
timerConfig.triggerSelect = FLEXIO_TIMER_TRIGGER_SEL_SHIFTnSTAT(base->shifterIndex[0]);
|
|
timerConfig.triggerPolarity = kFLEXIO_TimerTriggerPolarityActiveLow;
|
|
timerConfig.triggerSource = kFLEXIO_TimerTriggerSourceInternal;
|
|
timerConfig.pinConfig = kFLEXIO_PinConfigOutputDisabled;
|
|
timerConfig.pinSelect = base->TxPinIndex;
|
|
timerConfig.pinPolarity = kFLEXIO_PinActiveHigh;
|
|
timerConfig.timerMode = kFLEXIO_TimerModeDual8BitBaudBit;
|
|
timerConfig.timerOutput = kFLEXIO_TimerOutputOneNotAffectedByReset;
|
|
timerConfig.timerDecrement = kFLEXIO_TimerDecSrcOnFlexIOClockShiftTimerOutput;
|
|
timerConfig.timerReset = kFLEXIO_TimerResetNever;
|
|
timerConfig.timerDisable = kFLEXIO_TimerDisableOnTimerCompare;
|
|
timerConfig.timerEnable = kFLEXIO_TimerEnableOnTriggerHigh;
|
|
timerConfig.timerStop = kFLEXIO_TimerStopBitEnableOnTimerDisable;
|
|
timerConfig.timerStart = kFLEXIO_TimerStartBitEnabled;
|
|
|
|
timerDiv = srcClock_Hz / userConfig->baudRate_Bps;
|
|
timerDiv = timerDiv / 2 - 1;
|
|
|
|
if (timerDiv > 0xFFU)
|
|
{
|
|
result = kStatus_InvalidArgument;
|
|
}
|
|
|
|
timerCmp = ((uint32_t)(userConfig->bitCountPerChar * 2 - 1)) << 8U;
|
|
timerCmp |= timerDiv;
|
|
|
|
timerConfig.timerCompare = timerCmp;
|
|
|
|
FLEXIO_SetTimerConfig(base->flexioBase, base->timerIndex[0], &timerConfig);
|
|
|
|
/* 3. Configure the shifter 1 for rx. */
|
|
shifterConfig.timerSelect = base->timerIndex[1];
|
|
shifterConfig.timerPolarity = kFLEXIO_ShifterTimerPolarityOnNegitive;
|
|
shifterConfig.pinConfig = kFLEXIO_PinConfigOutputDisabled;
|
|
shifterConfig.pinSelect = base->RxPinIndex;
|
|
shifterConfig.pinPolarity = kFLEXIO_PinActiveHigh;
|
|
shifterConfig.shifterMode = kFLEXIO_ShifterModeReceive;
|
|
shifterConfig.inputSource = kFLEXIO_ShifterInputFromPin;
|
|
shifterConfig.shifterStop = kFLEXIO_ShifterStopBitHigh;
|
|
shifterConfig.shifterStart = kFLEXIO_ShifterStartBitLow;
|
|
|
|
FLEXIO_SetShifterConfig(base->flexioBase, base->shifterIndex[1], &shifterConfig);
|
|
|
|
/* 4. Configure the timer 1 for rx. */
|
|
timerConfig.triggerSelect = FLEXIO_TIMER_TRIGGER_SEL_PININPUT(base->RxPinIndex);
|
|
timerConfig.triggerPolarity = kFLEXIO_TimerTriggerPolarityActiveHigh;
|
|
timerConfig.triggerSource = kFLEXIO_TimerTriggerSourceExternal;
|
|
timerConfig.pinConfig = kFLEXIO_PinConfigOutputDisabled;
|
|
timerConfig.pinSelect = base->RxPinIndex;
|
|
timerConfig.pinPolarity = kFLEXIO_PinActiveLow;
|
|
timerConfig.timerMode = kFLEXIO_TimerModeDual8BitBaudBit;
|
|
timerConfig.timerOutput = kFLEXIO_TimerOutputOneAffectedByReset;
|
|
timerConfig.timerDecrement = kFLEXIO_TimerDecSrcOnFlexIOClockShiftTimerOutput;
|
|
timerConfig.timerReset = kFLEXIO_TimerResetOnTimerPinRisingEdge;
|
|
timerConfig.timerDisable = kFLEXIO_TimerDisableOnTimerCompare;
|
|
timerConfig.timerEnable = kFLEXIO_TimerEnableOnPinRisingEdge;
|
|
timerConfig.timerStop = kFLEXIO_TimerStopBitEnableOnTimerDisable;
|
|
timerConfig.timerStart = kFLEXIO_TimerStartBitEnabled;
|
|
|
|
timerConfig.timerCompare = timerCmp;
|
|
|
|
FLEXIO_SetTimerConfig(base->flexioBase, base->timerIndex[1], &timerConfig);
|
|
|
|
return result;
|
|
}
|
|
|
|
/*!
|
|
* brief Resets the FlexIO UART shifter and timer config.
|
|
*
|
|
* note After calling this API, call the FLEXO_UART_Init to use the FlexIO UART module.
|
|
*
|
|
* param base Pointer to FLEXIO_UART_Type structure
|
|
*/
|
|
void FLEXIO_UART_Deinit(FLEXIO_UART_Type *base)
|
|
{
|
|
base->flexioBase->SHIFTCFG[base->shifterIndex[0]] = 0;
|
|
base->flexioBase->SHIFTCTL[base->shifterIndex[0]] = 0;
|
|
base->flexioBase->SHIFTCFG[base->shifterIndex[1]] = 0;
|
|
base->flexioBase->SHIFTCTL[base->shifterIndex[1]] = 0;
|
|
base->flexioBase->TIMCFG[base->timerIndex[0]] = 0;
|
|
base->flexioBase->TIMCMP[base->timerIndex[0]] = 0;
|
|
base->flexioBase->TIMCTL[base->timerIndex[0]] = 0;
|
|
base->flexioBase->TIMCFG[base->timerIndex[1]] = 0;
|
|
base->flexioBase->TIMCMP[base->timerIndex[1]] = 0;
|
|
base->flexioBase->TIMCTL[base->timerIndex[1]] = 0;
|
|
/* Clear the shifter flag. */
|
|
base->flexioBase->SHIFTSTAT = (1U << base->shifterIndex[0]);
|
|
base->flexioBase->SHIFTSTAT = (1U << base->shifterIndex[1]);
|
|
/* Clear the timer flag. */
|
|
base->flexioBase->TIMSTAT = (1U << base->timerIndex[0]);
|
|
base->flexioBase->TIMSTAT = (1U << base->timerIndex[1]);
|
|
}
|
|
|
|
/*!
|
|
* brief Gets the default configuration to configure the FlexIO UART. The configuration
|
|
* can be used directly for calling the FLEXIO_UART_Init().
|
|
* Example:
|
|
code
|
|
flexio_uart_config_t config;
|
|
FLEXIO_UART_GetDefaultConfig(&userConfig);
|
|
endcode
|
|
* param userConfig Pointer to the flexio_uart_config_t structure.
|
|
*/
|
|
void FLEXIO_UART_GetDefaultConfig(flexio_uart_config_t *userConfig)
|
|
{
|
|
assert(userConfig);
|
|
|
|
/* Initializes the configure structure to zero. */
|
|
memset(userConfig, 0, sizeof(*userConfig));
|
|
|
|
userConfig->enableUart = true;
|
|
userConfig->enableInDoze = false;
|
|
userConfig->enableInDebug = true;
|
|
userConfig->enableFastAccess = false;
|
|
/* Default baud rate 115200. */
|
|
userConfig->baudRate_Bps = 115200U;
|
|
/* Default bit count at 8. */
|
|
userConfig->bitCountPerChar = kFLEXIO_UART_8BitsPerChar;
|
|
}
|
|
|
|
/*!
|
|
* brief Enables the FlexIO UART interrupt.
|
|
*
|
|
* This function enables the FlexIO UART interrupt.
|
|
*
|
|
* param base Pointer to the FLEXIO_UART_Type structure.
|
|
* param mask Interrupt source.
|
|
*/
|
|
void FLEXIO_UART_EnableInterrupts(FLEXIO_UART_Type *base, uint32_t mask)
|
|
{
|
|
if (mask & kFLEXIO_UART_TxDataRegEmptyInterruptEnable)
|
|
{
|
|
FLEXIO_EnableShifterStatusInterrupts(base->flexioBase, 1U << base->shifterIndex[0]);
|
|
}
|
|
if (mask & kFLEXIO_UART_RxDataRegFullInterruptEnable)
|
|
{
|
|
FLEXIO_EnableShifterStatusInterrupts(base->flexioBase, 1U << base->shifterIndex[1]);
|
|
}
|
|
}
|
|
|
|
/*!
|
|
* brief Disables the FlexIO UART interrupt.
|
|
*
|
|
* This function disables the FlexIO UART interrupt.
|
|
*
|
|
* param base Pointer to the FLEXIO_UART_Type structure.
|
|
* param mask Interrupt source.
|
|
*/
|
|
void FLEXIO_UART_DisableInterrupts(FLEXIO_UART_Type *base, uint32_t mask)
|
|
{
|
|
if (mask & kFLEXIO_UART_TxDataRegEmptyInterruptEnable)
|
|
{
|
|
FLEXIO_DisableShifterStatusInterrupts(base->flexioBase, 1U << base->shifterIndex[0]);
|
|
}
|
|
if (mask & kFLEXIO_UART_RxDataRegFullInterruptEnable)
|
|
{
|
|
FLEXIO_DisableShifterStatusInterrupts(base->flexioBase, 1U << base->shifterIndex[1]);
|
|
}
|
|
}
|
|
|
|
/*!
|
|
* brief Gets the FlexIO UART status flags.
|
|
*
|
|
* param base Pointer to the FLEXIO_UART_Type structure.
|
|
* return FlexIO UART status flags.
|
|
*/
|
|
|
|
uint32_t FLEXIO_UART_GetStatusFlags(FLEXIO_UART_Type *base)
|
|
{
|
|
uint32_t status = 0;
|
|
status =
|
|
((FLEXIO_GetShifterStatusFlags(base->flexioBase) & (1U << base->shifterIndex[0])) >> base->shifterIndex[0]);
|
|
status |=
|
|
(((FLEXIO_GetShifterStatusFlags(base->flexioBase) & (1U << base->shifterIndex[1])) >> (base->shifterIndex[1]))
|
|
<< 1U);
|
|
status |=
|
|
(((FLEXIO_GetShifterErrorFlags(base->flexioBase) & (1U << base->shifterIndex[1])) >> (base->shifterIndex[1]))
|
|
<< 2U);
|
|
return status;
|
|
}
|
|
|
|
/*!
|
|
* brief Gets the FlexIO UART status flags.
|
|
*
|
|
* param base Pointer to the FLEXIO_UART_Type structure.
|
|
* param mask Status flag.
|
|
* The parameter can be any combination of the following values:
|
|
* arg kFLEXIO_UART_TxDataRegEmptyFlag
|
|
* arg kFLEXIO_UART_RxEmptyFlag
|
|
* arg kFLEXIO_UART_RxOverRunFlag
|
|
*/
|
|
|
|
void FLEXIO_UART_ClearStatusFlags(FLEXIO_UART_Type *base, uint32_t mask)
|
|
{
|
|
if (mask & kFLEXIO_UART_TxDataRegEmptyFlag)
|
|
{
|
|
FLEXIO_ClearShifterStatusFlags(base->flexioBase, 1U << base->shifterIndex[0]);
|
|
}
|
|
if (mask & kFLEXIO_UART_RxDataRegFullFlag)
|
|
{
|
|
FLEXIO_ClearShifterStatusFlags(base->flexioBase, 1U << base->shifterIndex[1]);
|
|
}
|
|
if (mask & kFLEXIO_UART_RxOverRunFlag)
|
|
{
|
|
FLEXIO_ClearShifterErrorFlags(base->flexioBase, 1U << base->shifterIndex[1]);
|
|
}
|
|
}
|
|
|
|
/*!
|
|
* brief Sends a buffer of data bytes.
|
|
*
|
|
* note This function blocks using the polling method until all bytes have been sent.
|
|
*
|
|
* param base Pointer to the FLEXIO_UART_Type structure.
|
|
* param txData The data bytes to send.
|
|
* param txSize The number of data bytes to send.
|
|
*/
|
|
void FLEXIO_UART_WriteBlocking(FLEXIO_UART_Type *base, const uint8_t *txData, size_t txSize)
|
|
{
|
|
assert(txData);
|
|
assert(txSize);
|
|
|
|
while (txSize--)
|
|
{
|
|
/* Wait until data transfer complete. */
|
|
while (!(FLEXIO_GetShifterStatusFlags(base->flexioBase) & (1U << base->shifterIndex[0])))
|
|
{
|
|
}
|
|
|
|
base->flexioBase->SHIFTBUF[base->shifterIndex[0]] = *txData++;
|
|
}
|
|
}
|
|
|
|
/*!
|
|
* brief Receives a buffer of bytes.
|
|
*
|
|
* note This function blocks using the polling method until all bytes have been received.
|
|
*
|
|
* param base Pointer to the FLEXIO_UART_Type structure.
|
|
* param rxData The buffer to store the received bytes.
|
|
* param rxSize The number of data bytes to be received.
|
|
*/
|
|
void FLEXIO_UART_ReadBlocking(FLEXIO_UART_Type *base, uint8_t *rxData, size_t rxSize)
|
|
{
|
|
assert(rxData);
|
|
assert(rxSize);
|
|
|
|
while (rxSize--)
|
|
{
|
|
/* Wait until data transfer complete. */
|
|
while (!(FLEXIO_UART_GetStatusFlags(base) & kFLEXIO_UART_RxDataRegFullFlag))
|
|
{
|
|
}
|
|
|
|
*rxData++ = base->flexioBase->SHIFTBUFBYS[base->shifterIndex[1]];
|
|
}
|
|
}
|
|
|
|
/*!
|
|
* brief Initializes the UART handle.
|
|
*
|
|
* This function initializes the FlexIO UART handle, which can be used for other FlexIO
|
|
* UART transactional APIs. Call this API once to get the
|
|
* initialized handle.
|
|
*
|
|
* The UART driver supports the "background" receiving, which means that users can set up
|
|
* a RX ring buffer optionally. Data received is stored into the ring buffer even when
|
|
* the user doesn't call the FLEXIO_UART_TransferReceiveNonBlocking() API. If there is already data
|
|
* received in the ring buffer, users can get the received data from the ring buffer
|
|
* directly. The ring buffer is disabled if passing NULL as p ringBuffer.
|
|
*
|
|
* param base to FLEXIO_UART_Type structure.
|
|
* param handle Pointer to the flexio_uart_handle_t structure to store the transfer state.
|
|
* param callback The callback function.
|
|
* param userData The parameter of the callback function.
|
|
* retval kStatus_Success Successfully create the handle.
|
|
* retval kStatus_OutOfRange The FlexIO type/handle/ISR table out of range.
|
|
*/
|
|
status_t FLEXIO_UART_TransferCreateHandle(FLEXIO_UART_Type *base,
|
|
flexio_uart_handle_t *handle,
|
|
flexio_uart_transfer_callback_t callback,
|
|
void *userData)
|
|
{
|
|
assert(handle);
|
|
|
|
IRQn_Type flexio_irqs[] = FLEXIO_IRQS;
|
|
|
|
/* Zero the handle. */
|
|
memset(handle, 0, sizeof(*handle));
|
|
|
|
/* Set the TX/RX state. */
|
|
handle->rxState = kFLEXIO_UART_RxIdle;
|
|
handle->txState = kFLEXIO_UART_TxIdle;
|
|
|
|
/* Set the callback and user data. */
|
|
handle->callback = callback;
|
|
handle->userData = userData;
|
|
|
|
/* Enable interrupt in NVIC. */
|
|
EnableIRQ(flexio_irqs[FLEXIO_UART_GetInstance(base)]);
|
|
|
|
/* Save the context in global variables to support the double weak mechanism. */
|
|
return FLEXIO_RegisterHandleIRQ(base, handle, FLEXIO_UART_TransferHandleIRQ);
|
|
}
|
|
|
|
/*!
|
|
* brief Sets up the RX ring buffer.
|
|
*
|
|
* This function sets up the RX ring buffer to a specific UART handle.
|
|
*
|
|
* When the RX ring buffer is used, data received is stored into the ring buffer even when
|
|
* the user doesn't call the UART_ReceiveNonBlocking() API. If there is already data received
|
|
* in the ring buffer, users can get the received data from the ring buffer directly.
|
|
*
|
|
* note When using the RX ring buffer, one byte is reserved for internal use. In other
|
|
* words, if p ringBufferSize is 32, only 31 bytes are used for saving data.
|
|
*
|
|
* param base Pointer to the FLEXIO_UART_Type structure.
|
|
* param handle Pointer to the flexio_uart_handle_t structure to store the transfer state.
|
|
* param ringBuffer Start address of ring buffer for background receiving. Pass NULL to disable the ring buffer.
|
|
* param ringBufferSize Size of the ring buffer.
|
|
*/
|
|
void FLEXIO_UART_TransferStartRingBuffer(FLEXIO_UART_Type *base,
|
|
flexio_uart_handle_t *handle,
|
|
uint8_t *ringBuffer,
|
|
size_t ringBufferSize)
|
|
{
|
|
assert(handle);
|
|
|
|
/* Setup the ringbuffer address */
|
|
if (ringBuffer)
|
|
{
|
|
handle->rxRingBuffer = ringBuffer;
|
|
handle->rxRingBufferSize = ringBufferSize;
|
|
handle->rxRingBufferHead = 0U;
|
|
handle->rxRingBufferTail = 0U;
|
|
|
|
/* Enable the interrupt to accept the data when user need the ring buffer. */
|
|
FLEXIO_UART_EnableInterrupts(base, kFLEXIO_UART_RxDataRegFullInterruptEnable);
|
|
}
|
|
}
|
|
|
|
/*!
|
|
* brief Aborts the background transfer and uninstalls the ring buffer.
|
|
*
|
|
* This function aborts the background transfer and uninstalls the ring buffer.
|
|
*
|
|
* param base Pointer to the FLEXIO_UART_Type structure.
|
|
* param handle Pointer to the flexio_uart_handle_t structure to store the transfer state.
|
|
*/
|
|
void FLEXIO_UART_TransferStopRingBuffer(FLEXIO_UART_Type *base, flexio_uart_handle_t *handle)
|
|
{
|
|
assert(handle);
|
|
|
|
if (handle->rxState == kFLEXIO_UART_RxIdle)
|
|
{
|
|
FLEXIO_UART_DisableInterrupts(base, kFLEXIO_UART_RxDataRegFullInterruptEnable);
|
|
}
|
|
|
|
handle->rxRingBuffer = NULL;
|
|
handle->rxRingBufferSize = 0U;
|
|
handle->rxRingBufferHead = 0U;
|
|
handle->rxRingBufferTail = 0U;
|
|
}
|
|
|
|
/*!
|
|
* brief Transmits a buffer of data using the interrupt method.
|
|
*
|
|
* This function sends data using an interrupt method. This is a non-blocking function,
|
|
* which returns directly without waiting for all data to be written to the TX register. When
|
|
* all data is written to the TX register in ISR, the FlexIO UART driver calls the callback
|
|
* function and passes the ref kStatus_FLEXIO_UART_TxIdle as status parameter.
|
|
*
|
|
* note The kStatus_FLEXIO_UART_TxIdle is passed to the upper layer when all data is written
|
|
* to the TX register. However, it does not ensure that all data is sent out.
|
|
*
|
|
* param base Pointer to the FLEXIO_UART_Type structure.
|
|
* param handle Pointer to the flexio_uart_handle_t structure to store the transfer state.
|
|
* param xfer FlexIO UART transfer structure. See #flexio_uart_transfer_t.
|
|
* retval kStatus_Success Successfully starts the data transmission.
|
|
* retval kStatus_UART_TxBusy Previous transmission still not finished, data not written to the TX register.
|
|
*/
|
|
status_t FLEXIO_UART_TransferSendNonBlocking(FLEXIO_UART_Type *base,
|
|
flexio_uart_handle_t *handle,
|
|
flexio_uart_transfer_t *xfer)
|
|
{
|
|
status_t status;
|
|
|
|
/* Return error if xfer invalid. */
|
|
if ((0U == xfer->dataSize) || (NULL == xfer->data))
|
|
{
|
|
return kStatus_InvalidArgument;
|
|
}
|
|
|
|
/* Return error if current TX busy. */
|
|
if (kFLEXIO_UART_TxBusy == handle->txState)
|
|
{
|
|
status = kStatus_FLEXIO_UART_TxBusy;
|
|
}
|
|
else
|
|
{
|
|
handle->txData = xfer->data;
|
|
handle->txDataSize = xfer->dataSize;
|
|
handle->txDataSizeAll = xfer->dataSize;
|
|
handle->txState = kFLEXIO_UART_TxBusy;
|
|
|
|
/* Enable transmiter interrupt. */
|
|
FLEXIO_UART_EnableInterrupts(base, kFLEXIO_UART_TxDataRegEmptyInterruptEnable);
|
|
|
|
status = kStatus_Success;
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/*!
|
|
* brief Aborts the interrupt-driven data transmit.
|
|
*
|
|
* This function aborts the interrupt-driven data sending. Get the remainBytes to find out
|
|
* how many bytes are still not sent out.
|
|
*
|
|
* param base Pointer to the FLEXIO_UART_Type structure.
|
|
* param handle Pointer to the flexio_uart_handle_t structure to store the transfer state.
|
|
*/
|
|
void FLEXIO_UART_TransferAbortSend(FLEXIO_UART_Type *base, flexio_uart_handle_t *handle)
|
|
{
|
|
/* Disable the transmitter and disable the interrupt. */
|
|
FLEXIO_UART_DisableInterrupts(base, kFLEXIO_UART_TxDataRegEmptyInterruptEnable);
|
|
|
|
handle->txDataSize = 0;
|
|
handle->txState = kFLEXIO_UART_TxIdle;
|
|
}
|
|
|
|
/*!
|
|
* brief Gets the number of bytes sent.
|
|
*
|
|
* This function gets the number of bytes sent driven by interrupt.
|
|
*
|
|
* param base Pointer to the FLEXIO_UART_Type structure.
|
|
* param handle Pointer to the flexio_uart_handle_t structure to store the transfer state.
|
|
* param count Number of bytes sent so far by the non-blocking transaction.
|
|
* retval kStatus_NoTransferInProgress transfer has finished or no transfer in progress.
|
|
* retval kStatus_Success Successfully return the count.
|
|
*/
|
|
status_t FLEXIO_UART_TransferGetSendCount(FLEXIO_UART_Type *base, flexio_uart_handle_t *handle, size_t *count)
|
|
{
|
|
assert(handle);
|
|
assert(count);
|
|
|
|
if (kFLEXIO_UART_TxIdle == handle->txState)
|
|
{
|
|
return kStatus_NoTransferInProgress;
|
|
}
|
|
|
|
*count = handle->txDataSizeAll - handle->txDataSize;
|
|
|
|
return kStatus_Success;
|
|
}
|
|
|
|
/*!
|
|
* brief Receives a buffer of data using the interrupt method.
|
|
*
|
|
* This function receives data using the interrupt method. This is a non-blocking function,
|
|
* which returns without waiting for all data to be received.
|
|
* If the RX ring buffer is used and not empty, the data in ring buffer is copied and
|
|
* the parameter p receivedBytes shows how many bytes are copied from the ring buffer.
|
|
* After copying, if the data in ring buffer is not enough to read, the receive
|
|
* request is saved by the UART driver. When new data arrives, the receive request
|
|
* is serviced first. When all data is received, the UART driver notifies the upper layer
|
|
* through a callback function and passes the status parameter ref kStatus_UART_RxIdle.
|
|
* For example, if the upper layer needs 10 bytes but there are only 5 bytes in the ring buffer,
|
|
* the 5 bytes are copied to xfer->data. This function returns with the
|
|
* parameter p receivedBytes set to 5. For the last 5 bytes, newly arrived data is
|
|
* saved from the xfer->data[5]. When 5 bytes are received, the UART driver notifies upper layer.
|
|
* If the RX ring buffer is not enabled, this function enables the RX and RX interrupt
|
|
* to receive data to xfer->data. When all data is received, the upper layer is notified.
|
|
*
|
|
* param base Pointer to the FLEXIO_UART_Type structure.
|
|
* param handle Pointer to the flexio_uart_handle_t structure to store the transfer state.
|
|
* param xfer UART transfer structure. See #flexio_uart_transfer_t.
|
|
* param receivedBytes Bytes received from the ring buffer directly.
|
|
* retval kStatus_Success Successfully queue the transfer into the transmit queue.
|
|
* retval kStatus_FLEXIO_UART_RxBusy Previous receive request is not finished.
|
|
*/
|
|
status_t FLEXIO_UART_TransferReceiveNonBlocking(FLEXIO_UART_Type *base,
|
|
flexio_uart_handle_t *handle,
|
|
flexio_uart_transfer_t *xfer,
|
|
size_t *receivedBytes)
|
|
{
|
|
uint32_t i;
|
|
status_t status;
|
|
/* How many bytes to copy from ring buffer to user memory. */
|
|
size_t bytesToCopy = 0U;
|
|
/* How many bytes to receive. */
|
|
size_t bytesToReceive;
|
|
/* How many bytes currently have received. */
|
|
size_t bytesCurrentReceived;
|
|
|
|
/* Return error if xfer invalid. */
|
|
if ((0U == xfer->dataSize) || (NULL == xfer->data))
|
|
{
|
|
return kStatus_InvalidArgument;
|
|
}
|
|
|
|
/* How to get data:
|
|
1. If RX ring buffer is not enabled, then save xfer->data and xfer->dataSize
|
|
to uart handle, enable interrupt to store received data to xfer->data. When
|
|
all data received, trigger callback.
|
|
2. If RX ring buffer is enabled and not empty, get data from ring buffer first.
|
|
If there are enough data in ring buffer, copy them to xfer->data and return.
|
|
If there are not enough data in ring buffer, copy all of them to xfer->data,
|
|
save the xfer->data remained empty space to uart handle, receive data
|
|
to this empty space and trigger callback when finished. */
|
|
|
|
if (kFLEXIO_UART_RxBusy == handle->rxState)
|
|
{
|
|
status = kStatus_FLEXIO_UART_RxBusy;
|
|
}
|
|
else
|
|
{
|
|
bytesToReceive = xfer->dataSize;
|
|
bytesCurrentReceived = 0U;
|
|
|
|
/* If RX ring buffer is used. */
|
|
if (handle->rxRingBuffer)
|
|
{
|
|
/* Disable FLEXIO_UART RX IRQ, protect ring buffer. */
|
|
FLEXIO_UART_DisableInterrupts(base, kFLEXIO_UART_RxDataRegFullInterruptEnable);
|
|
|
|
/* How many bytes in RX ring buffer currently. */
|
|
bytesToCopy = FLEXIO_UART_TransferGetRxRingBufferLength(handle);
|
|
|
|
if (bytesToCopy)
|
|
{
|
|
bytesToCopy = MIN(bytesToReceive, bytesToCopy);
|
|
|
|
bytesToReceive -= bytesToCopy;
|
|
|
|
/* Copy data from ring buffer to user memory. */
|
|
for (i = 0U; i < bytesToCopy; i++)
|
|
{
|
|
xfer->data[bytesCurrentReceived++] = handle->rxRingBuffer[handle->rxRingBufferTail];
|
|
|
|
/* Wrap to 0. Not use modulo (%) because it might be large and slow. */
|
|
if (handle->rxRingBufferTail + 1U == handle->rxRingBufferSize)
|
|
{
|
|
handle->rxRingBufferTail = 0U;
|
|
}
|
|
else
|
|
{
|
|
handle->rxRingBufferTail++;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* If ring buffer does not have enough data, still need to read more data. */
|
|
if (bytesToReceive)
|
|
{
|
|
/* No data in ring buffer, save the request to UART handle. */
|
|
handle->rxData = xfer->data + bytesCurrentReceived;
|
|
handle->rxDataSize = bytesToReceive;
|
|
handle->rxDataSizeAll = bytesToReceive;
|
|
handle->rxState = kFLEXIO_UART_RxBusy;
|
|
}
|
|
|
|
/* Enable FLEXIO_UART RX IRQ if previously enabled. */
|
|
FLEXIO_UART_EnableInterrupts(base, kFLEXIO_UART_RxDataRegFullInterruptEnable);
|
|
|
|
/* Call user callback since all data are received. */
|
|
if (0 == bytesToReceive)
|
|
{
|
|
if (handle->callback)
|
|
{
|
|
handle->callback(base, handle, kStatus_FLEXIO_UART_RxIdle, handle->userData);
|
|
}
|
|
}
|
|
}
|
|
/* Ring buffer not used. */
|
|
else
|
|
{
|
|
handle->rxData = xfer->data + bytesCurrentReceived;
|
|
handle->rxDataSize = bytesToReceive;
|
|
handle->rxDataSizeAll = bytesToReceive;
|
|
handle->rxState = kFLEXIO_UART_RxBusy;
|
|
|
|
/* Enable RX interrupt. */
|
|
FLEXIO_UART_EnableInterrupts(base, kFLEXIO_UART_RxDataRegFullInterruptEnable);
|
|
}
|
|
|
|
/* Return the how many bytes have read. */
|
|
if (receivedBytes)
|
|
{
|
|
*receivedBytes = bytesCurrentReceived;
|
|
}
|
|
|
|
status = kStatus_Success;
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/*!
|
|
* brief Aborts the receive data which was using IRQ.
|
|
*
|
|
* This function aborts the receive data which was using IRQ.
|
|
*
|
|
* param base Pointer to the FLEXIO_UART_Type structure.
|
|
* param handle Pointer to the flexio_uart_handle_t structure to store the transfer state.
|
|
*/
|
|
void FLEXIO_UART_TransferAbortReceive(FLEXIO_UART_Type *base, flexio_uart_handle_t *handle)
|
|
{
|
|
/* Only abort the receive to handle->rxData, the RX ring buffer is still working. */
|
|
if (!handle->rxRingBuffer)
|
|
{
|
|
/* Disable RX interrupt. */
|
|
FLEXIO_UART_DisableInterrupts(base, kFLEXIO_UART_RxDataRegFullInterruptEnable);
|
|
}
|
|
|
|
handle->rxDataSize = 0U;
|
|
handle->rxState = kFLEXIO_UART_RxIdle;
|
|
}
|
|
|
|
/*!
|
|
* brief Gets the number of bytes received.
|
|
*
|
|
* This function gets the number of bytes received driven by interrupt.
|
|
*
|
|
* param base Pointer to the FLEXIO_UART_Type structure.
|
|
* param handle Pointer to the flexio_uart_handle_t structure to store the transfer state.
|
|
* param count Number of bytes received so far by the non-blocking transaction.
|
|
* retval kStatus_NoTransferInProgress transfer has finished or no transfer in progress.
|
|
* retval kStatus_Success Successfully return the count.
|
|
*/
|
|
status_t FLEXIO_UART_TransferGetReceiveCount(FLEXIO_UART_Type *base, flexio_uart_handle_t *handle, size_t *count)
|
|
{
|
|
assert(handle);
|
|
assert(count);
|
|
|
|
if (kFLEXIO_UART_RxIdle == handle->rxState)
|
|
{
|
|
return kStatus_NoTransferInProgress;
|
|
}
|
|
|
|
*count = handle->rxDataSizeAll - handle->rxDataSize;
|
|
|
|
return kStatus_Success;
|
|
}
|
|
|
|
/*!
|
|
* brief FlexIO UART IRQ handler function.
|
|
*
|
|
* This function processes the FlexIO UART transmit and receives the IRQ request.
|
|
*
|
|
* param uartType Pointer to the FLEXIO_UART_Type structure.
|
|
* param uartHandle Pointer to the flexio_uart_handle_t structure to store the transfer state.
|
|
*/
|
|
void FLEXIO_UART_TransferHandleIRQ(void *uartType, void *uartHandle)
|
|
{
|
|
uint8_t count = 1;
|
|
FLEXIO_UART_Type *base = (FLEXIO_UART_Type *)uartType;
|
|
flexio_uart_handle_t *handle = (flexio_uart_handle_t *)uartHandle;
|
|
|
|
/* Read the status back. */
|
|
uint8_t status = FLEXIO_UART_GetStatusFlags(base);
|
|
|
|
/* If RX overrun. */
|
|
if (kFLEXIO_UART_RxOverRunFlag & status)
|
|
{
|
|
/* Clear Overrun flag. */
|
|
FLEXIO_UART_ClearStatusFlags(base, kFLEXIO_UART_RxOverRunFlag);
|
|
|
|
/* Trigger callback. */
|
|
if (handle->callback)
|
|
{
|
|
handle->callback(base, handle, kStatus_FLEXIO_UART_RxHardwareOverrun, handle->userData);
|
|
}
|
|
}
|
|
|
|
/* Receive data register full */
|
|
if ((kFLEXIO_UART_RxDataRegFullFlag & status) && (base->flexioBase->SHIFTSIEN & (1U << base->shifterIndex[1])))
|
|
{
|
|
/* If handle->rxDataSize is not 0, first save data to handle->rxData. */
|
|
if (handle->rxDataSize)
|
|
{
|
|
/* Using non block API to read the data from the registers. */
|
|
FLEXIO_UART_ReadByte(base, handle->rxData);
|
|
handle->rxDataSize--;
|
|
handle->rxData++;
|
|
count--;
|
|
|
|
/* If all the data required for upper layer is ready, trigger callback. */
|
|
if (!handle->rxDataSize)
|
|
{
|
|
handle->rxState = kFLEXIO_UART_RxIdle;
|
|
|
|
if (handle->callback)
|
|
{
|
|
handle->callback(base, handle, kStatus_FLEXIO_UART_RxIdle, handle->userData);
|
|
}
|
|
}
|
|
}
|
|
|
|
if (handle->rxRingBuffer)
|
|
{
|
|
if (count)
|
|
{
|
|
/* If RX ring buffer is full, trigger callback to notify over run. */
|
|
if (FLEXIO_UART_TransferIsRxRingBufferFull(handle))
|
|
{
|
|
if (handle->callback)
|
|
{
|
|
handle->callback(base, handle, kStatus_FLEXIO_UART_RxRingBufferOverrun, handle->userData);
|
|
}
|
|
}
|
|
|
|
/* If ring buffer is still full after callback function, the oldest data is overrided. */
|
|
if (FLEXIO_UART_TransferIsRxRingBufferFull(handle))
|
|
{
|
|
/* Increase handle->rxRingBufferTail to make room for new data. */
|
|
if (handle->rxRingBufferTail + 1U == handle->rxRingBufferSize)
|
|
{
|
|
handle->rxRingBufferTail = 0U;
|
|
}
|
|
else
|
|
{
|
|
handle->rxRingBufferTail++;
|
|
}
|
|
}
|
|
|
|
/* Read data. */
|
|
handle->rxRingBuffer[handle->rxRingBufferHead] = base->flexioBase->SHIFTBUFBYS[base->shifterIndex[1]];
|
|
|
|
/* Increase handle->rxRingBufferHead. */
|
|
if (handle->rxRingBufferHead + 1U == handle->rxRingBufferSize)
|
|
{
|
|
handle->rxRingBufferHead = 0U;
|
|
}
|
|
else
|
|
{
|
|
handle->rxRingBufferHead++;
|
|
}
|
|
}
|
|
}
|
|
/* If no receive requst pending, stop RX interrupt. */
|
|
else if (!handle->rxDataSize)
|
|
{
|
|
FLEXIO_UART_DisableInterrupts(base, kFLEXIO_UART_RxDataRegFullInterruptEnable);
|
|
}
|
|
else
|
|
{
|
|
}
|
|
}
|
|
|
|
/* Send data register empty and the interrupt is enabled. */
|
|
if ((kFLEXIO_UART_TxDataRegEmptyFlag & status) && (base->flexioBase->SHIFTSIEN & (1U << base->shifterIndex[0])))
|
|
{
|
|
if (handle->txDataSize)
|
|
{
|
|
/* Using non block API to write the data to the registers. */
|
|
FLEXIO_UART_WriteByte(base, handle->txData);
|
|
handle->txData++;
|
|
handle->txDataSize--;
|
|
count--;
|
|
|
|
/* If all the data are written to data register, TX finished. */
|
|
if (!handle->txDataSize)
|
|
{
|
|
handle->txState = kFLEXIO_UART_TxIdle;
|
|
|
|
/* Disable TX register empty interrupt. */
|
|
FLEXIO_UART_DisableInterrupts(base, kFLEXIO_UART_TxDataRegEmptyInterruptEnable);
|
|
|
|
/* Trigger callback. */
|
|
if (handle->callback)
|
|
{
|
|
handle->callback(base, handle, kStatus_FLEXIO_UART_TxIdle, handle->userData);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|