300 lines
7.5 KiB
C
300 lines
7.5 KiB
C
/*
|
|
* Copyright (c) 2006-2018, RT-Thread Development Team
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*
|
|
* Change Logs:
|
|
* Date Author Notes
|
|
* 2013-11-15 bright the first version
|
|
*/
|
|
|
|
#include <stm32f0xx.h>
|
|
#include <rtdevice.h>
|
|
#include "usart.h"
|
|
|
|
/* USART1 */
|
|
#define UART1_GPIO_TX GPIO_Pin_9
|
|
#define UART1_GPIO_TX_SOURCE GPIO_PinSource9
|
|
#define UART1_GPIO_RX GPIO_Pin_10
|
|
#define UART1_GPIO_RX_SOURCE GPIO_PinSource10
|
|
#define UART1_GPIO_AF GPIO_AF_1
|
|
#define UART1_GPIO GPIOA
|
|
|
|
/* USART2 */
|
|
#define UART2_GPIO_TX GPIO_Pin_2
|
|
#define UART2_GPIO_TX_SOURCE GPIO_PinSource2
|
|
#define UART2_GPIO_RX GPIO_Pin_3
|
|
#define UART2_GPIO_RX_SOURCE GPIO_PinSource3
|
|
#define UART2_GPIO_AF GPIO_AF_1
|
|
#define UART2_GPIO GPIOA
|
|
|
|
/* STM32 uart driver */
|
|
struct stm32_uart
|
|
{
|
|
USART_TypeDef* uart_device;
|
|
IRQn_Type irq;
|
|
};
|
|
|
|
static rt_err_t stm32_configure(struct rt_serial_device *serial, struct serial_configure *cfg)
|
|
{
|
|
struct stm32_uart* uart;
|
|
USART_InitTypeDef USART_InitStructure;
|
|
|
|
RT_ASSERT(serial != RT_NULL);
|
|
RT_ASSERT(cfg != RT_NULL);
|
|
|
|
uart = (struct stm32_uart *)serial->parent.user_data;
|
|
|
|
USART_InitStructure.USART_BaudRate = cfg->baud_rate;
|
|
|
|
if (cfg->data_bits == DATA_BITS_8)
|
|
USART_InitStructure.USART_WordLength = USART_WordLength_8b;
|
|
|
|
if (cfg->stop_bits == STOP_BITS_1)
|
|
USART_InitStructure.USART_StopBits = USART_StopBits_1;
|
|
else if (cfg->stop_bits == STOP_BITS_2)
|
|
USART_InitStructure.USART_StopBits = USART_StopBits_2;
|
|
|
|
USART_InitStructure.USART_Parity = USART_Parity_No;
|
|
USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
|
|
USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
|
|
USART_Init(uart->uart_device, &USART_InitStructure);
|
|
|
|
/* Enable USART */
|
|
USART_Cmd(uart->uart_device, ENABLE);
|
|
/* enable interrupt */
|
|
USART_ITConfig(uart->uart_device, USART_IT_RXNE, ENABLE);
|
|
|
|
return RT_EOK;
|
|
}
|
|
|
|
static rt_err_t stm32_control(struct rt_serial_device *serial, int cmd, void *arg)
|
|
{
|
|
struct stm32_uart* uart;
|
|
|
|
RT_ASSERT(serial != RT_NULL);
|
|
uart = (struct stm32_uart *)serial->parent.user_data;
|
|
|
|
switch (cmd)
|
|
{
|
|
case RT_DEVICE_CTRL_CLR_INT:
|
|
/* disable rx irq */
|
|
UART_DISABLE_IRQ(uart->irq);
|
|
break;
|
|
case RT_DEVICE_CTRL_SET_INT:
|
|
/* enable rx irq */
|
|
UART_ENABLE_IRQ(uart->irq);
|
|
break;
|
|
}
|
|
|
|
return RT_EOK;
|
|
}
|
|
|
|
static int stm32_putc(struct rt_serial_device *serial, char c)
|
|
{
|
|
struct stm32_uart* uart;
|
|
|
|
RT_ASSERT(serial != RT_NULL);
|
|
uart = (struct stm32_uart *)serial->parent.user_data;
|
|
|
|
USART_ClearFlag(uart->uart_device,USART_FLAG_TC);
|
|
uart->uart_device->TDR = c;
|
|
while (!(uart->uart_device->ISR & USART_FLAG_TC));
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int stm32_getc(struct rt_serial_device *serial)
|
|
{
|
|
int ch;
|
|
struct stm32_uart* uart;
|
|
|
|
RT_ASSERT(serial != RT_NULL);
|
|
uart = (struct stm32_uart *)serial->parent.user_data;
|
|
|
|
ch = -1;
|
|
if (uart->uart_device->ISR & USART_FLAG_RXNE)
|
|
{
|
|
ch = uart->uart_device->RDR & 0xff;
|
|
}
|
|
|
|
return ch;
|
|
}
|
|
|
|
static const struct rt_uart_ops stm32_uart_ops =
|
|
{
|
|
stm32_configure,
|
|
stm32_control,
|
|
stm32_putc,
|
|
stm32_getc,
|
|
};
|
|
|
|
#if defined(RT_USING_UART1)
|
|
/* UART1 device driver structure */
|
|
struct stm32_uart uart1 =
|
|
{
|
|
USART1,
|
|
USART1_IRQn,
|
|
};
|
|
struct rt_serial_device serial1;
|
|
|
|
void USART1_IRQHandler(void)
|
|
{
|
|
struct stm32_uart* uart;
|
|
|
|
uart = &uart1;
|
|
|
|
/* enter interrupt */
|
|
rt_interrupt_enter();
|
|
if(USART_GetITStatus(uart->uart_device, USART_IT_RXNE) != RESET)
|
|
{
|
|
rt_hw_serial_isr(&serial1, RT_SERIAL_EVENT_RX_IND);
|
|
}
|
|
if (USART_GetITStatus(uart->uart_device, USART_IT_TC) != RESET)
|
|
{
|
|
/* clear interrupt */
|
|
USART_ClearITPendingBit(uart->uart_device, USART_IT_TC);
|
|
}
|
|
|
|
/* leave interrupt */
|
|
rt_interrupt_leave();
|
|
}
|
|
#endif /* RT_USING_UART1 */
|
|
|
|
#if defined(RT_USING_UART2)
|
|
/* UART2 device driver structure */
|
|
struct stm32_uart uart2 =
|
|
{
|
|
USART2,
|
|
USART2_IRQn,
|
|
};
|
|
struct rt_serial_device serial2;
|
|
|
|
void USART2_IRQHandler(void)
|
|
{
|
|
struct stm32_uart* uart;
|
|
|
|
uart = &uart2;
|
|
|
|
/* enter interrupt */
|
|
rt_interrupt_enter();
|
|
if(USART_GetITStatus(uart->uart_device, USART_IT_RXNE) != RESET)
|
|
{
|
|
rt_hw_serial_isr(&serial2, RT_SERIAL_EVENT_RX_IND);
|
|
}
|
|
if (USART_GetITStatus(uart->uart_device, USART_IT_TC) != RESET)
|
|
{
|
|
/* clear interrupt */
|
|
USART_ClearITPendingBit(uart->uart_device, USART_IT_TC);
|
|
}
|
|
|
|
/* leave interrupt */
|
|
rt_interrupt_leave();
|
|
}
|
|
#endif /* RT_USING_UART2 */
|
|
|
|
static void RCC_Configuration(void)
|
|
{
|
|
#ifdef RT_USING_UART1
|
|
/* Enable GPIO clock */
|
|
RCC_AHBPeriphClockCmd(RCC_AHBPeriph_GPIOA, ENABLE);
|
|
/* Enable USART clock */
|
|
RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1, ENABLE);
|
|
#endif /* RT_USING_UART1 */
|
|
|
|
#ifdef RT_USING_UART2
|
|
/* Enable GPIO clock */
|
|
RCC_AHBPeriphClockCmd(RCC_AHBPeriph_GPIOA, ENABLE);
|
|
/* Enable USART clock */
|
|
RCC_APB1PeriphClockCmd(RCC_APB1Periph_USART2, ENABLE);
|
|
#endif /* RT_USING_UART2 */
|
|
|
|
}
|
|
|
|
static void GPIO_Configuration(void)
|
|
{
|
|
GPIO_InitTypeDef GPIO_InitStructure;
|
|
|
|
#ifdef RT_USING_UART1
|
|
/* Connect PXx to USARTx_Tx */
|
|
GPIO_PinAFConfig(UART1_GPIO, UART1_GPIO_TX_SOURCE, UART1_GPIO_AF);
|
|
|
|
/* Connect PXx to USARTx_Rx */
|
|
GPIO_PinAFConfig(UART1_GPIO, UART1_GPIO_RX_SOURCE, UART1_GPIO_AF);
|
|
|
|
/* Configure USART Tx, Rx as alternate function push-pull */
|
|
GPIO_InitStructure.GPIO_Pin = UART1_GPIO_TX | UART1_GPIO_RX;
|
|
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
|
|
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
|
|
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
|
|
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP;
|
|
GPIO_Init(UART1_GPIO, &GPIO_InitStructure);
|
|
#endif /* RT_USING_UART1 */
|
|
|
|
#ifdef RT_USING_UART2
|
|
/* Connect PXx to USARTx_Tx */
|
|
GPIO_PinAFConfig(UART2_GPIO, UART2_GPIO_TX_SOURCE, UART2_GPIO_AF);
|
|
|
|
/* Connect PXx to USARTx_Rx */
|
|
GPIO_PinAFConfig(UART2_GPIO, UART2_GPIO_RX_SOURCE, UART2_GPIO_AF);
|
|
|
|
/* Configure USART Tx, Rx as alternate function push-pull */
|
|
GPIO_InitStructure.GPIO_Pin = UART2_GPIO_TX | UART2_GPIO_RX;
|
|
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
|
|
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
|
|
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
|
|
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP;
|
|
GPIO_Init(UART2_GPIO, &GPIO_InitStructure);
|
|
#endif /* RT_USING_UART2 */
|
|
}
|
|
|
|
static void NVIC_Configuration(struct stm32_uart* uart)
|
|
{
|
|
NVIC_InitTypeDef NVIC_InitStructure;
|
|
|
|
/* Enable the USART Interrupt */
|
|
NVIC_InitStructure.NVIC_IRQChannel = uart->irq;
|
|
NVIC_InitStructure.NVIC_IRQChannelPriority = 0;
|
|
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
|
|
NVIC_Init(&NVIC_InitStructure);
|
|
}
|
|
|
|
void rt_hw_usart_init(void)
|
|
{
|
|
struct stm32_uart* uart;
|
|
struct serial_configure config = RT_SERIAL_CONFIG_DEFAULT;
|
|
|
|
RCC_Configuration();
|
|
GPIO_Configuration();
|
|
|
|
#ifdef RT_USING_UART1
|
|
uart = &uart1;
|
|
config.baud_rate = BAUD_RATE_115200;
|
|
|
|
serial1.ops = &stm32_uart_ops;
|
|
serial1.config = config;
|
|
|
|
NVIC_Configuration(&uart1);
|
|
|
|
/* register UART1 device */
|
|
rt_hw_serial_register(&serial1, "uart1",
|
|
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
|
|
uart);
|
|
#endif /* RT_USING_UART1 */
|
|
|
|
#ifdef RT_USING_UART2
|
|
uart = &uart2;
|
|
|
|
config.baud_rate = BAUD_RATE_115200;
|
|
serial2.ops = &stm32_uart_ops;
|
|
serial2.config = config;
|
|
|
|
NVIC_Configuration(&uart2);
|
|
|
|
/* register UART1 device */
|
|
rt_hw_serial_register(&serial2, "uart2",
|
|
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
|
|
uart);
|
|
#endif /* RT_USING_UART2 */
|
|
}
|