162 lines
10 KiB
C
162 lines
10 KiB
C
/*!
|
|
\file gd32f4xx_dbg.h
|
|
\brief definitions for the DBG
|
|
|
|
\version 2016-08-15, V1.0.0, firmware for GD32F4xx
|
|
\version 2018-12-12, V2.0.0, firmware for GD32F4xx
|
|
\version 2020-09-30, V2.1.0, firmware for GD32F4xx
|
|
*/
|
|
|
|
/*
|
|
Copyright (c) 2020, GigaDevice Semiconductor Inc.
|
|
|
|
Redistribution and use in source and binary forms, with or without modification,
|
|
are permitted provided that the following conditions are met:
|
|
|
|
1. Redistributions of source code must retain the above copyright notice, this
|
|
list of conditions and the following disclaimer.
|
|
2. Redistributions in binary form must reproduce the above copyright notice,
|
|
this list of conditions and the following disclaimer in the documentation
|
|
and/or other materials provided with the distribution.
|
|
3. Neither the name of the copyright holder nor the names of its contributors
|
|
may be used to endorse or promote products derived from this software without
|
|
specific prior written permission.
|
|
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
|
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
|
|
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
|
|
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
|
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
|
|
OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#ifndef GD32F4XX_DBG_H
|
|
#define GD32F4XX_DBG_H
|
|
|
|
#include "gd32f4xx.h"
|
|
|
|
/* DBG definitions */
|
|
#define DBG DBG_BASE
|
|
|
|
/* registers definitions */
|
|
#define DBG_ID REG32(DBG + 0x00U) /*!< DBG_ID code register */
|
|
#define DBG_CTL0 REG32(DBG + 0x04U) /*!< DBG control register 0 */
|
|
#define DBG_CTL1 REG32(DBG + 0x08U) /*!< DBG control register 1 */
|
|
#define DBG_CTL2 REG32(DBG + 0x0CU) /*!< DBG control register 2 */
|
|
|
|
/* bits definitions */
|
|
/* DBG_ID */
|
|
#define DBG_ID_ID_CODE BITS(0,31) /*!< DBG ID code values */
|
|
|
|
/* DBG_CTL0 */
|
|
#define DBG_CTL0_SLP_HOLD BIT(0) /*!< keep debugger connection during sleep mode */
|
|
#define DBG_CTL0_DSLP_HOLD BIT(1) /*!< keep debugger connection during deepsleep mode */
|
|
#define DBG_CTL0_STB_HOLD BIT(2) /*!< keep debugger connection during standby mode */
|
|
#define DBG_CTL0_TRACE_IOEN BIT(5) /*!< enable trace pin assignment */
|
|
#define DBG_CTL0_TRACE_MODE BITS(6,7) /*!< trace pin mode selection */
|
|
|
|
/* DBG_CTL1 */
|
|
#define DBG_CTL1_TIMER1_HOLD BIT(0) /*!< hold TIMER1 counter when core is halted */
|
|
#define DBG_CTL1_TIMER2_HOLD BIT(1) /*!< hold TIMER2 counter when core is halted */
|
|
#define DBG_CTL1_TIMER3_HOLD BIT(2) /*!< hold TIMER3 counter when core is halted */
|
|
#define DBG_CTL1_TIMER4_HOLD BIT(3) /*!< hold TIMER4 counter when core is halted */
|
|
#define DBG_CTL1_TIMER5_HOLD BIT(4) /*!< hold TIMER5 counter when core is halted */
|
|
#define DBG_CTL1_TIMER6_HOLD BIT(5) /*!< hold TIMER6 counter when core is halted */
|
|
#define DBG_CTL1_TIMER11_HOLD BIT(6) /*!< hold TIMER11 counter when core is halted */
|
|
#define DBG_CTL1_TIMER12_HOLD BIT(7) /*!< hold TIMER12 counter when core is halted */
|
|
#define DBG_CTL1_TIMER13_HOLD BIT(8) /*!< hold TIMER13 counter when core is halted */
|
|
#define DBG_CTL1_RTC_HOLD BIT(10) /*!< hold RTC calendar and wakeup counter when core is halted */
|
|
#define DBG_CTL1_WWDGT_HOLD BIT(11) /*!< debug WWDGT kept when core is halted */
|
|
#define DBG_CTL1_FWDGT_HOLD BIT(12) /*!< debug FWDGT kept when core is halted */
|
|
#define DBG_CTL1_I2C0_HOLD BIT(21) /*!< hold I2C0 smbus when core is halted */
|
|
#define DBG_CTL1_I2C1_HOLD BIT(22) /*!< hold I2C1 smbus when core is halted */
|
|
#define DBG_CTL1_I2C2_HOLD BIT(23) /*!< hold I2C2 smbus when core is halted */
|
|
#define DBG_CTL1_CAN0_HOLD BIT(25) /*!< debug CAN0 kept when core is halted */
|
|
#define DBG_CTL1_CAN1_HOLD BIT(26) /*!< debug CAN1 kept when core is halted */
|
|
|
|
/* DBG_CTL2 */
|
|
#define DBG_CTL2_TIMER0_HOLD BIT(0) /*!< hold TIMER0 counter when core is halted */
|
|
#define DBG_CTL2_TIMER7_HOLD BIT(1) /*!< hold TIMER7 counter when core is halted */
|
|
#define DBG_CTL2_TIMER8_HOLD BIT(16) /*!< hold TIMER8 counter when core is halted */
|
|
#define DBG_CTL2_TIMER9_HOLD BIT(17) /*!< hold TIMER9 counter when core is halted */
|
|
#define DBG_CTL2_TIMER10_HOLD BIT(18) /*!< hold TIMER10 counter when core is halted */
|
|
|
|
/* constants definitions */
|
|
#define DBG_LOW_POWER_SLEEP DBG_CTL0_SLP_HOLD /*!< keep debugger connection during sleep mode */
|
|
#define DBG_LOW_POWER_DEEPSLEEP DBG_CTL0_DSLP_HOLD /*!< keep debugger connection during deepsleep mode */
|
|
#define DBG_LOW_POWER_STANDBY DBG_CTL0_STB_HOLD /*!< keep debugger connection during standby mode */
|
|
|
|
/* define the peripheral debug hold bit position and its register index offset */
|
|
#define DBG_REGIDX_BIT(regidx, bitpos) (((regidx) << 6) | (bitpos))
|
|
#define DBG_REG_VAL(periph) (REG32(DBG + ((uint32_t)(periph) >> 6)))
|
|
#define DBG_BIT_POS(val) ((uint32_t)(val) & 0x1FU)
|
|
|
|
/* register index */
|
|
enum dbg_reg_idx
|
|
{
|
|
DBG_IDX_CTL0 = 0x04U,
|
|
DBG_IDX_CTL1 = 0x08U,
|
|
DBG_IDX_CTL2 = 0x0CU
|
|
};
|
|
|
|
typedef enum
|
|
{
|
|
DBG_TIMER1_HOLD = DBG_REGIDX_BIT(DBG_IDX_CTL1, 0U), /*!< hold TIMER1 counter when core is halted */
|
|
DBG_TIMER2_HOLD = DBG_REGIDX_BIT(DBG_IDX_CTL1, 1U), /*!< hold TIMER2 counter when core is halted */
|
|
DBG_TIMER3_HOLD = DBG_REGIDX_BIT(DBG_IDX_CTL1, 2U), /*!< hold TIMER3 counter when core is halted */
|
|
DBG_TIMER4_HOLD = DBG_REGIDX_BIT(DBG_IDX_CTL1, 3U), /*!< hold TIMER4 counter when core is halted */
|
|
DBG_TIMER5_HOLD = DBG_REGIDX_BIT(DBG_IDX_CTL1, 4U), /*!< hold TIMER5 counter when core is halted */
|
|
DBG_TIMER6_HOLD = DBG_REGIDX_BIT(DBG_IDX_CTL1, 5U), /*!< hold TIMER6 counter when core is halted */
|
|
DBG_TIMER11_HOLD = DBG_REGIDX_BIT(DBG_IDX_CTL1, 6U), /*!< hold TIMER11 counter when core is halted */
|
|
DBG_TIMER12_HOLD = DBG_REGIDX_BIT(DBG_IDX_CTL1, 7U), /*!< hold TIMER12 counter when core is halted */
|
|
DBG_TIMER13_HOLD = DBG_REGIDX_BIT(DBG_IDX_CTL1, 8U), /*!< hold TIMER13 counter when core is halted */
|
|
DBG_RTC_HOLD = DBG_REGIDX_BIT(DBG_IDX_CTL1, 10U), /*!< hold RTC calendar and wakeup counter when core is halted */
|
|
DBG_WWDGT_HOLD = DBG_REGIDX_BIT(DBG_IDX_CTL1, 11U), /*!< debug WWDGT kept when core is halted */
|
|
DBG_FWDGT_HOLD = DBG_REGIDX_BIT(DBG_IDX_CTL1, 12U), /*!< debug FWDGT kept when core is halted */
|
|
DBG_I2C0_HOLD = DBG_REGIDX_BIT(DBG_IDX_CTL1, 21U), /*!< hold I2C0 smbus when core is halted */
|
|
DBG_I2C1_HOLD = DBG_REGIDX_BIT(DBG_IDX_CTL1, 22U), /*!< hold I2C1 smbus when core is halted */
|
|
DBG_I2C2_HOLD = DBG_REGIDX_BIT(DBG_IDX_CTL1, 23U), /*!< hold I2C2 smbus when core is halted */
|
|
DBG_CAN0_HOLD = DBG_REGIDX_BIT(DBG_IDX_CTL1, 25U), /*!< debug CAN0 kept when core is halted */
|
|
DBG_CAN1_HOLD = DBG_REGIDX_BIT(DBG_IDX_CTL1, 26U), /*!< debug CAN1 kept when core is halted */
|
|
DBG_TIMER0_HOLD = DBG_REGIDX_BIT(DBG_IDX_CTL2, 0U), /*!< hold TIMER0 counter when core is halted */
|
|
DBG_TIMER7_HOLD = DBG_REGIDX_BIT(DBG_IDX_CTL2, 1U), /*!< hold TIMER7 counter when core is halted */
|
|
DBG_TIMER8_HOLD = DBG_REGIDX_BIT(DBG_IDX_CTL2, 16U), /*!< hold TIMER8 counter when core is halted */
|
|
DBG_TIMER9_HOLD = DBG_REGIDX_BIT(DBG_IDX_CTL2, 17U), /*!< hold TIMER9 counter when core is halted */
|
|
DBG_TIMER10_HOLD = DBG_REGIDX_BIT(DBG_IDX_CTL2, 18U) /*!< hold TIMER10 counter when core is halted */
|
|
}dbg_periph_enum;
|
|
|
|
#define CTL0_TRACE_MODE(regval) (BITS(6,7)&((uint32_t)(regval)<<6))
|
|
#define TRACE_MODE_ASYNC CTL0_TRACE_MODE(0) /*!< trace pin used for async mode */
|
|
#define TRACE_MODE_SYNC_DATASIZE_1 CTL0_TRACE_MODE(1) /*!< trace pin used for sync mode and data size is 1 */
|
|
#define TRACE_MODE_SYNC_DATASIZE_2 CTL0_TRACE_MODE(2) /*!< trace pin used for sync mode and data size is 2 */
|
|
#define TRACE_MODE_SYNC_DATASIZE_4 CTL0_TRACE_MODE(3) /*!< trace pin used for sync mode and data size is 4 */
|
|
|
|
/* function declarations */
|
|
/* deinitialize the DBG */
|
|
void dbg_deinit(void);
|
|
/* read DBG_ID code register */
|
|
uint32_t dbg_id_get(void);
|
|
|
|
/* enable low power behavior when the MCU is in debug mode */
|
|
void dbg_low_power_enable(uint32_t dbg_low_power);
|
|
/* disable low power behavior when the MCU is in debug mode */
|
|
void dbg_low_power_disable(uint32_t dbg_low_power);
|
|
|
|
/* enable peripheral behavior when the MCU is in debug mode */
|
|
void dbg_periph_enable(dbg_periph_enum dbg_periph);
|
|
/* disable peripheral behavior when the MCU is in debug mode */
|
|
void dbg_periph_disable(dbg_periph_enum dbg_periph);
|
|
|
|
/* enable trace pin assignment */
|
|
void dbg_trace_pin_enable(void);
|
|
/* disable trace pin assignment */
|
|
void dbg_trace_pin_disable(void);
|
|
/* set trace pin mode */
|
|
void dbg_trace_pin_mode_set(uint32_t trace_mode);
|
|
|
|
#endif /* GD32F4XX_DBG_H */
|