rt-thread/bsp/lm3s9b9x/Libraries/driverlib/watchdog.c

614 lines
19 KiB
C

//*****************************************************************************
//
// watchdog.c - Driver for the Watchdog Timer Module.
//
// Copyright (c) 2005-2011 Texas Instruments Incorporated. All rights reserved.
// Software License Agreement
//
// Texas Instruments (TI) is supplying this software for use solely and
// exclusively on TI's microcontroller products. The software is owned by
// TI and/or its suppliers, and is protected under applicable copyright
// laws. You may not combine this software with "viral" open-source
// software in order to form a larger program.
//
// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
// DAMAGES, FOR ANY REASON WHATSOEVER.
//
// This is part of revision 8264 of the Stellaris Peripheral Driver Library.
//
//*****************************************************************************
//*****************************************************************************
//
//! \addtogroup watchdog_api
//! @{
//
//*****************************************************************************
#include "inc/hw_ints.h"
#include "inc/hw_memmap.h"
#include "inc/hw_types.h"
#include "inc/hw_watchdog.h"
#include "driverlib/debug.h"
#include "driverlib/interrupt.h"
#include "driverlib/watchdog.h"
//*****************************************************************************
//
//! Determines if the watchdog timer is enabled.
//!
//! \param ulBase is the base address of the watchdog timer module.
//!
//! This function checks to see if the watchdog timer is enabled.
//!
//! \return Returns \b true if the watchdog timer is enabled and \b false
//! if it is not.
//
//*****************************************************************************
tBoolean
WatchdogRunning(unsigned long ulBase)
{
//
// Check the arguments.
//
ASSERT((ulBase == WATCHDOG0_BASE) || (ulBase == WATCHDOG1_BASE));
//
// See if the watchdog timer module is enabled, and return.
//
return(HWREG(ulBase + WDT_O_CTL) & WDT_CTL_INTEN);
}
//*****************************************************************************
//
//! Enables the watchdog timer.
//!
//! \param ulBase is the base address of the watchdog timer module.
//!
//! This function enables the watchdog timer counter and interrupt.
//!
//! \note This function has no effect if the watchdog timer has been locked.
//!
//! \sa WatchdogLock(), WatchdogUnlock()
//!
//! \return None.
//
//*****************************************************************************
void
WatchdogEnable(unsigned long ulBase)
{
//
// Check the arguments.
//
ASSERT((ulBase == WATCHDOG0_BASE) || (ulBase == WATCHDOG1_BASE));
//
// Enable the watchdog timer module.
//
HWREG(ulBase + WDT_O_CTL) |= WDT_CTL_INTEN;
}
//*****************************************************************************
//
//! Enables the watchdog timer reset.
//!
//! \param ulBase is the base address of the watchdog timer module.
//!
//! This function enables the capability of the watchdog timer to issue a reset
//! to the processor after a second timeout condition.
//!
//! \note This function has no effect if the watchdog timer has been locked.
//!
//! \sa WatchdogLock(), WatchdogUnlock()
//!
//! \return None.
//
//*****************************************************************************
void
WatchdogResetEnable(unsigned long ulBase)
{
//
// Check the arguments.
//
ASSERT((ulBase == WATCHDOG0_BASE) || (ulBase == WATCHDOG1_BASE));
//
// Enable the watchdog reset.
//
HWREG(ulBase + WDT_O_CTL) |= WDT_CTL_RESEN;
}
//*****************************************************************************
//
//! Disables the watchdog timer reset.
//!
//! \param ulBase is the base address of the watchdog timer module.
//!
//! This function disables the capability of the watchdog timer to issue a
//! reset to the processor after a second timeout condition.
//!
//! \note This function has no effect if the watchdog timer has been locked.
//!
//! \sa WatchdogLock(), WatchdogUnlock()
//!
//! \return None.
//
//*****************************************************************************
void
WatchdogResetDisable(unsigned long ulBase)
{
//
// Check the arguments.
//
ASSERT((ulBase == WATCHDOG0_BASE) || (ulBase == WATCHDOG1_BASE));
//
// Disable the watchdog reset.
//
HWREG(ulBase + WDT_O_CTL) &= ~(WDT_CTL_RESEN);
}
//*****************************************************************************
//
//! Enables the watchdog timer lock mechanism.
//!
//! \param ulBase is the base address of the watchdog timer module.
//!
//! This function locks out write access to the watchdog timer configuration
//! registers.
//!
//! \return None.
//
//*****************************************************************************
void
WatchdogLock(unsigned long ulBase)
{
//
// Check the arguments.
//
ASSERT((ulBase == WATCHDOG0_BASE) || (ulBase == WATCHDOG1_BASE));
//
// Lock out watchdog register writes. Writing anything to the WDT_O_LOCK
// register causes the lock to go into effect.
//
HWREG(ulBase + WDT_O_LOCK) = WDT_LOCK_LOCKED;
}
//*****************************************************************************
//
//! Disables the watchdog timer lock mechanism.
//!
//! \param ulBase is the base address of the watchdog timer module.
//!
//! This function enables write access to the watchdog timer configuration
//! registers.
//!
//! \return None.
//
//*****************************************************************************
void
WatchdogUnlock(unsigned long ulBase)
{
//
// Check the arguments.
//
ASSERT((ulBase == WATCHDOG0_BASE) || (ulBase == WATCHDOG1_BASE));
//
// Unlock watchdog register writes.
//
HWREG(ulBase + WDT_O_LOCK) = WDT_LOCK_UNLOCK;
}
//*****************************************************************************
//
//! Gets the state of the watchdog timer lock mechanism.
//!
//! \param ulBase is the base address of the watchdog timer module.
//!
//! This function returns the lock state of the watchdog timer registers.
//!
//! \return Returns \b true if the watchdog timer registers are locked, and
//! \b false if they are not locked.
//
//*****************************************************************************
tBoolean
WatchdogLockState(unsigned long ulBase)
{
//
// Check the arguments.
//
ASSERT((ulBase == WATCHDOG0_BASE) || (ulBase == WATCHDOG1_BASE));
//
// Get the lock state.
//
return((HWREG(ulBase + WDT_O_LOCK) == WDT_LOCK_LOCKED) ? true : false);
}
//*****************************************************************************
//
//! Sets the watchdog timer reload value.
//!
//! \param ulBase is the base address of the watchdog timer module.
//! \param ulLoadVal is the load value for the watchdog timer.
//!
//! This function configures the value to load into the watchdog timer when the
//! count reaches zero for the first time; if the watchdog timer is running
//! when this function is called, then the value is immediately loaded into the
//! watchdog timer counter. If the \e ulLoadVal parameter is 0, then an
//! interrupt is immediately generated.
//!
//! \note This function has no effect if the watchdog timer has been locked.
//!
//! \sa WatchdogLock(), WatchdogUnlock(), WatchdogReloadGet()
//!
//! \return None.
//
//*****************************************************************************
void
WatchdogReloadSet(unsigned long ulBase, unsigned long ulLoadVal)
{
//
// Check the arguments.
//
ASSERT((ulBase == WATCHDOG0_BASE) || (ulBase == WATCHDOG1_BASE));
//
// Set the load register.
//
HWREG(ulBase + WDT_O_LOAD) = ulLoadVal;
}
//*****************************************************************************
//
//! Gets the watchdog timer reload value.
//!
//! \param ulBase is the base address of the watchdog timer module.
//!
//! This function gets the value that is loaded into the watchdog timer when
//! the count reaches zero for the first time.
//!
//! \sa WatchdogReloadSet()
//!
//! \return None.
//
//*****************************************************************************
unsigned long
WatchdogReloadGet(unsigned long ulBase)
{
//
// Check the arguments.
//
ASSERT((ulBase == WATCHDOG0_BASE) || (ulBase == WATCHDOG1_BASE));
//
// Get the load register.
//
return(HWREG(ulBase + WDT_O_LOAD));
}
//*****************************************************************************
//
//! Gets the current watchdog timer value.
//!
//! \param ulBase is the base address of the watchdog timer module.
//!
//! This function reads the current value of the watchdog timer.
//!
//! \return Returns the current value of the watchdog timer.
//
//*****************************************************************************
unsigned long
WatchdogValueGet(unsigned long ulBase)
{
//
// Check the arguments.
//
ASSERT((ulBase == WATCHDOG0_BASE) || (ulBase == WATCHDOG1_BASE));
//
// Get the current watchdog timer register value.
//
return(HWREG(ulBase + WDT_O_VALUE));
}
//*****************************************************************************
//
//! Registers an interrupt handler for the watchdog timer interrupt.
//!
//! \param ulBase is the base address of the watchdog timer module.
//! \param pfnHandler is a pointer to the function to be called when the
//! watchdog timer interrupt occurs.
//!
//! This function does the actual registering of the interrupt handler. This
//! function also enables the global interrupt in the interrupt controller; the
//! watchdog timer interrupt must be enabled via WatchdogEnable(). It is the
//! interrupt handler's responsibility to clear the interrupt source via
//! WatchdogIntClear().
//!
//! \sa IntRegister() for important information about registering interrupt
//! handlers.
//!
//! \note For parts with a watchdog timer module that has the ability to
//! generate an NMI instead of a standard interrupt, this function registers
//! the standard watchdog interrupt handler. To register the NMI watchdog
//! handler, use IntRegister() to register the handler for the
//! \b FAULT_NMI interrupt.
//!
//! \return None.
//
//*****************************************************************************
void
WatchdogIntRegister(unsigned long ulBase, void (*pfnHandler)(void))
{
//
// Check the arguments.
//
ASSERT((ulBase == WATCHDOG0_BASE) || (ulBase == WATCHDOG1_BASE));
//
// Register the interrupt handler.
//
IntRegister(INT_WATCHDOG, pfnHandler);
//
// Enable the watchdog timer interrupt.
//
IntEnable(INT_WATCHDOG);
}
//*****************************************************************************
//
//! Unregisters an interrupt handler for the watchdog timer interrupt.
//!
//! \param ulBase is the base address of the watchdog timer module.
//!
//! This function does the actual unregistering of the interrupt handler. This
//! function clears the handler to be called when a watchdog timer interrupt
//! occurs. This function also masks off the interrupt in the interrupt
//! controller so that the interrupt handler no longer is called.
//!
//! \sa IntRegister() for important information about registering interrupt
//! handlers.
//!
//! \note For parts with a watchdog timer module that has the ability to
//! generate an NMI instead of a standard interrupt, this function unregisters
//! the standard watchdog interrupt handler. To unregister the NMI watchdog
//! handler, use IntUnregister() to unregister the handler for the
//! \b FAULT_NMI interrupt.
//!
//! \return None.
//
//*****************************************************************************
void
WatchdogIntUnregister(unsigned long ulBase)
{
//
// Check the arguments.
//
ASSERT((ulBase == WATCHDOG0_BASE) || (ulBase == WATCHDOG1_BASE));
//
// Disable the interrupt.
//
IntDisable(INT_WATCHDOG);
//
// Unregister the interrupt handler.
//
IntUnregister(INT_WATCHDOG);
}
//*****************************************************************************
//
//! Enables the watchdog timer interrupt.
//!
//! \param ulBase is the base address of the watchdog timer module.
//!
//! This function enables the watchdog timer interrupt.
//!
//! \note This function has no effect if the watchdog timer has been locked.
//!
//! \sa WatchdogLock(), WatchdogUnlock(), WatchdogEnable()
//!
//! \return None.
//
//*****************************************************************************
void
WatchdogIntEnable(unsigned long ulBase)
{
//
// Check the arguments.
//
ASSERT((ulBase == WATCHDOG0_BASE) || (ulBase == WATCHDOG1_BASE));
//
// Enable the watchdog interrupt.
//
HWREG(ulBase + WDT_O_CTL) |= WDT_CTL_INTEN;
}
//*****************************************************************************
//
//! Gets the current watchdog timer interrupt status.
//!
//! \param ulBase is the base address of the watchdog timer module.
//! \param bMasked is \b false if the raw interrupt status is required and
//! \b true if the masked interrupt status is required.
//!
//! This function returns the interrupt status for the watchdog timer module.
//! Either the raw interrupt status or the status of interrupt that is allowed
//! to reflect to the processor can be returned.
//!
//! \return Returns the current interrupt status, where a 1 indicates that the
//! watchdog interrupt is active, and a 0 indicates that it is not active.
//
//*****************************************************************************
unsigned long
WatchdogIntStatus(unsigned long ulBase, tBoolean bMasked)
{
//
// Check the arguments.
//
ASSERT((ulBase == WATCHDOG0_BASE) || (ulBase == WATCHDOG1_BASE));
//
// Return either the interrupt status or the raw interrupt status as
// requested.
//
if(bMasked)
{
return(HWREG(ulBase + WDT_O_MIS));
}
else
{
return(HWREG(ulBase + WDT_O_RIS));
}
}
//*****************************************************************************
//
//! Clears the watchdog timer interrupt.
//!
//! \param ulBase is the base address of the watchdog timer module.
//!
//! The watchdog timer interrupt source is cleared, so that it no longer
//! asserts.
//!
//! \note Because there is a write buffer in the Cortex-M processor, it may
//! take several clock cycles before the interrupt source is actually cleared.
//! Therefore, it is recommended that the interrupt source be cleared early in
//! the interrupt handler (as opposed to the very last action) to avoid
//! returning from the interrupt handler before the interrupt source is
//! actually cleared. Failure to do so may result in the interrupt handler
//! being immediately reentered (because the interrupt controller still sees
//! the interrupt source asserted).
//!
//! \return None.
//
//*****************************************************************************
void
WatchdogIntClear(unsigned long ulBase)
{
//
// Check the arguments.
//
ASSERT((ulBase == WATCHDOG0_BASE) || (ulBase == WATCHDOG1_BASE));
//
// Clear the interrupt source.
//
HWREG(ulBase + WDT_O_ICR) = WDT_INT_TIMEOUT;
}
//*****************************************************************************
//
//! Sets the type of interrupt generated by the watchdog.
//!
//! \param ulBase is the base address of the watchdog timer module.
//! \param ulType is the type of interrupt to generate.
//!
//! This function sets the type of interrupt that is generated if the watchdog
//! timer expires. \e ulType can be either \b WATCHDOG_INT_TYPE_INT to
//! generate a standard interrupt (the default) or \b WATCHDOG_INT_TYPE_NMI to
//! generate a non-maskable interrupt (NMI).
//!
//! When configured to generate an NMI, the watchdog interrupt must still be
//! enabled with WatchdogIntEnable(), and it must still be cleared inside the
//! NMI handler with WatchdogIntClear().
//!
//! \note The ability to select an NMI interrupt varies with the Stellaris part
//! in use. Please consult the datasheet for the part you are using to
//! determine whether this support is available.
//!
//! \return None.
//
//*****************************************************************************
void
WatchdogIntTypeSet(unsigned long ulBase, unsigned long ulType)
{
//
// Check the arguments.
//
ASSERT((ulBase == WATCHDOG0_BASE) || (ulBase == WATCHDOG1_BASE));
ASSERT((ulType == WATCHDOG_INT_TYPE_INT) ||
(ulType == WATCHDOG_INT_TYPE_NMI));
//
// Set the interrupt type.
//
HWREG(ulBase + WDT_O_CTL) =
(HWREG(ulBase + WDT_O_CTL) & ~WDT_CTL_INTTYPE) | ulType;
}
//*****************************************************************************
//
//! Enables stalling of the watchdog timer during debug events.
//!
//! \param ulBase is the base address of the watchdog timer module.
//!
//! This function allows the watchdog timer to stop counting when the processor
//! is stopped by the debugger. By doing so, the watchdog is prevented from
//! expiring (typically almost immediately from a human time perspective) and
//! resetting the system (if reset is enabled). The watchdog instead expires
//! after the appropriate number of processor cycles have been executed while
//! debugging (or at the appropriate time after the processor has been
//! restarted).
//!
//! \return None.
//
//*****************************************************************************
void
WatchdogStallEnable(unsigned long ulBase)
{
//
// Check the arguments.
//
ASSERT((ulBase == WATCHDOG0_BASE) || (ulBase == WATCHDOG1_BASE));
//
// Enable timer stalling.
//
HWREG(ulBase + WDT_O_TEST) |= WDT_TEST_STALL;
}
//*****************************************************************************
//
//! Disables stalling of the watchdog timer during debug events.
//!
//! \param ulBase is the base address of the watchdog timer module.
//!
//! This function disables the debug mode stall of the watchdog timer. By
//! doing so, the watchdog timer continues to count regardless of the processor
//! debug state.
//!
//! \return None.
//
//*****************************************************************************
void
WatchdogStallDisable(unsigned long ulBase)
{
//
// Check the arguments.
//
ASSERT((ulBase == WATCHDOG0_BASE) || (ulBase == WATCHDOG1_BASE));
//
// Disable timer stalling.
//
HWREG(ulBase + WDT_O_TEST) &= ~(WDT_TEST_STALL);
}
//*****************************************************************************
//
// Close the Doxygen group.
//! @}
//
//*****************************************************************************