146 lines
4.3 KiB
C
146 lines
4.3 KiB
C
#include <rtthread.h>
|
|
#include "stm32f10x.h"
|
|
|
|
/*******************************************************************************
|
|
* Function Name : NVIC_Configuration
|
|
* Description : Configures the nested vectored interrupt controller.
|
|
* Input : None
|
|
* Output : None
|
|
* Return : None
|
|
*******************************************************************************/
|
|
void NVIC_Configuration(void)
|
|
{
|
|
#ifdef VECT_TAB_RAM
|
|
/* Set the Vector Table base location at 0x20000000 */
|
|
NVIC_SetVectorTable(NVIC_VectTab_RAM, 0x0);
|
|
#else /* VECT_TAB_FLASH */
|
|
/* Set the Vector Table base location at 0x08000000 */
|
|
NVIC_SetVectorTable(NVIC_VectTab_FLASH, 0x0);
|
|
#endif
|
|
}
|
|
|
|
/*******************************************************************************
|
|
* Function Name : SysTick_Configuration
|
|
* Description : Configures the SysTick for OS tick.
|
|
* Input : None
|
|
* Output : None
|
|
* Return : None
|
|
*******************************************************************************/
|
|
void SysTick_Configuration(void)
|
|
{
|
|
RCC_ClocksTypeDef rcc_clocks;
|
|
rt_uint32_t cnts;
|
|
|
|
RCC_GetClocksFreq(&rcc_clocks);
|
|
|
|
cnts = (rt_uint32_t)rcc_clocks.HCLK_Frequency / RT_TICK_PER_SECOND;
|
|
|
|
SysTick_Config(cnts);
|
|
SysTick_CLKSourceConfig(SysTick_CLKSource_HCLK);
|
|
}
|
|
|
|
/* init console to support rt_kprintf */
|
|
static void rt_hw_console_init()
|
|
{
|
|
/* Enable USART1 and GPIOA clocks */
|
|
RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1 | RCC_APB2Periph_GPIOA, ENABLE);
|
|
|
|
/* GPIO configuration */
|
|
{
|
|
GPIO_InitTypeDef GPIO_InitStructure;
|
|
|
|
/* Configure USART1 Tx (PA.09) as alternate function push-pull */
|
|
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9;
|
|
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
|
|
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
|
|
GPIO_Init(GPIOA, &GPIO_InitStructure);
|
|
|
|
/* Configure USART1 Rx (PA.10) as input floating */
|
|
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;
|
|
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
|
|
GPIO_Init(GPIOA, &GPIO_InitStructure);
|
|
}
|
|
|
|
/* USART configuration */
|
|
{
|
|
USART_InitTypeDef USART_InitStructure;
|
|
|
|
/* USART1 configured as follow:
|
|
- BaudRate = 115200 baud
|
|
- Word Length = 8 Bits
|
|
- One Stop Bit
|
|
- No parity
|
|
- Hardware flow control disabled (RTS and CTS signals)
|
|
- Receive and transmit enabled
|
|
- USART Clock disabled
|
|
- USART CPOL: Clock is active low
|
|
- USART CPHA: Data is captured on the middle
|
|
- USART LastBit: The clock pulse of the last data bit is not output to
|
|
the SCLK pin
|
|
*/
|
|
USART_InitStructure.USART_BaudRate = 115200;
|
|
USART_InitStructure.USART_WordLength = USART_WordLength_8b;
|
|
USART_InitStructure.USART_StopBits = USART_StopBits_1;
|
|
USART_InitStructure.USART_Parity = USART_Parity_No;
|
|
USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
|
|
USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
|
|
USART_Init(USART1, &USART_InitStructure);
|
|
/* Enable USART1 */
|
|
USART_Cmd(USART1, ENABLE);
|
|
}
|
|
}
|
|
|
|
/* write one character to serial, must not trigger interrupt */
|
|
static void rt_hw_console_putc(const char c)
|
|
{
|
|
/*
|
|
to be polite with serial console add a line feed
|
|
to the carriage return character
|
|
*/
|
|
if (c=='\n')rt_hw_console_putc('\r');
|
|
|
|
while (!(USART1->SR & USART_FLAG_TXE));
|
|
USART1->DR = (c & 0x1FF);
|
|
}
|
|
|
|
/**
|
|
* This function is used by rt_kprintf to display a string on console.
|
|
*
|
|
* @param str the displayed string
|
|
*/
|
|
void rt_hw_console_output(const char* str)
|
|
{
|
|
while (*str)
|
|
{
|
|
rt_hw_console_putc (*str++);
|
|
}
|
|
}
|
|
|
|
void board_init(void)
|
|
{
|
|
/* NVIC Configuration */
|
|
NVIC_Configuration();
|
|
|
|
/* Configure the SysTick */
|
|
SysTick_Configuration();
|
|
|
|
rt_hw_console_init();
|
|
}
|
|
|
|
/**
|
|
* This is the timer interrupt service routine.
|
|
*
|
|
*/
|
|
extern void rt_hw_interrupt_thread_switch(void);
|
|
void rt_hw_timer_handler(void)
|
|
{
|
|
/* enter interrupt */
|
|
rt_interrupt_enter();
|
|
|
|
rt_tick_increase();
|
|
|
|
/* leave interrupt */
|
|
rt_interrupt_leave();
|
|
rt_hw_interrupt_thread_switch();
|
|
}
|