416 lines
12 KiB
C
416 lines
12 KiB
C
/*
|
|
* File : drv_usart.c
|
|
* This file is part of RT-Thread RTOS
|
|
* COPYRIGHT (C) 2006-2013, RT-Thread Development Team
|
|
*
|
|
* The license and distribution terms for this file may be
|
|
* found in the file LICENSE in this distribution or at
|
|
* http://www.rt-thread.org/license/LICENSE
|
|
*
|
|
* Change Logs:
|
|
* Date Author Notes
|
|
* 2009-01-05 Bernard the first version
|
|
* 2010-03-29 Bernard remove interrupt Tx and DMA Rx mode
|
|
* 2013-05-13 aozima update for kehong-lingtai.
|
|
* 2015-01-31 armink make sure the serial transmit complete in putc()
|
|
* 2016-05-13 armink add DMA Rx mode
|
|
* 2017-01-19 aubr.cool add interrupt Tx mode
|
|
* 2017-04-13 aubr.cool correct Rx parity err
|
|
* 2017-10-20 ZYH porting to HAL Libraries(with out DMA)
|
|
* 2017-11-15 ZYH update to 3.0.0
|
|
*/
|
|
#include "board.h"
|
|
#include <rtdevice.h>
|
|
#include <drv_usart.h>
|
|
|
|
/* STM32 uart driver */
|
|
struct stm32_uart
|
|
{
|
|
UART_HandleTypeDef huart;
|
|
IRQn_Type irq;
|
|
};
|
|
|
|
static rt_err_t stm32_configure(struct rt_serial_device *serial, struct serial_configure *cfg)
|
|
{
|
|
struct stm32_uart *uart;
|
|
RT_ASSERT(serial != RT_NULL);
|
|
RT_ASSERT(cfg != RT_NULL);
|
|
uart = (struct stm32_uart *)serial->parent.user_data;
|
|
uart->huart.Init.BaudRate = cfg->baud_rate;
|
|
uart->huart.Init.HwFlowCtl = UART_HWCONTROL_NONE;
|
|
uart->huart.Init.Mode = UART_MODE_TX_RX;
|
|
uart->huart.Init.OverSampling = UART_OVERSAMPLING_16;
|
|
switch (cfg->data_bits)
|
|
{
|
|
case DATA_BITS_8:
|
|
uart->huart.Init.WordLength = UART_WORDLENGTH_8B;
|
|
break;
|
|
case DATA_BITS_9:
|
|
uart->huart.Init.WordLength = UART_WORDLENGTH_9B;
|
|
break;
|
|
default:
|
|
uart->huart.Init.WordLength = UART_WORDLENGTH_8B;
|
|
break;
|
|
}
|
|
switch (cfg->stop_bits)
|
|
{
|
|
case STOP_BITS_1:
|
|
uart->huart.Init.StopBits = UART_STOPBITS_1;
|
|
break;
|
|
case STOP_BITS_2:
|
|
uart->huart.Init.StopBits = UART_STOPBITS_2;
|
|
break;
|
|
default:
|
|
uart->huart.Init.StopBits = UART_STOPBITS_1;
|
|
break;
|
|
}
|
|
switch (cfg->parity)
|
|
{
|
|
case PARITY_NONE:
|
|
uart->huart.Init.Parity = UART_PARITY_NONE;
|
|
break;
|
|
case PARITY_ODD:
|
|
uart->huart.Init.Parity = UART_PARITY_ODD;
|
|
break;
|
|
case PARITY_EVEN:
|
|
uart->huart.Init.Parity = UART_PARITY_EVEN;
|
|
break;
|
|
default:
|
|
uart->huart.Init.Parity = UART_PARITY_NONE;
|
|
break;
|
|
}
|
|
if (HAL_UART_Init(&uart->huart) != HAL_OK)
|
|
{
|
|
return RT_ERROR;
|
|
}
|
|
return RT_EOK;
|
|
}
|
|
|
|
static rt_err_t stm32_control(struct rt_serial_device *serial, int cmd, void *arg)
|
|
{
|
|
struct stm32_uart *uart;
|
|
RT_ASSERT(serial != RT_NULL);
|
|
uart = (struct stm32_uart *)serial->parent.user_data;
|
|
switch (cmd)
|
|
{
|
|
/* disable interrupt */
|
|
case RT_DEVICE_CTRL_CLR_INT:
|
|
/* disable rx irq */
|
|
NVIC_DisableIRQ(uart->irq);
|
|
/* disable interrupt */
|
|
__HAL_UART_DISABLE_IT(&uart->huart, USART_IT_RXNE);
|
|
break;
|
|
/* enable interrupt */
|
|
case RT_DEVICE_CTRL_SET_INT:
|
|
/* enable rx irq */
|
|
NVIC_EnableIRQ(uart->irq);
|
|
/* enable interrupt */
|
|
__HAL_UART_ENABLE_IT(&uart->huart, USART_IT_RXNE);
|
|
break;
|
|
}
|
|
return RT_EOK;
|
|
}
|
|
|
|
static int stm32_putc(struct rt_serial_device *serial, char c)
|
|
{
|
|
struct stm32_uart *uart;
|
|
RT_ASSERT(serial != RT_NULL);
|
|
uart = (struct stm32_uart *)serial->parent.user_data;
|
|
while (__HAL_UART_GET_FLAG(&uart->huart, UART_FLAG_TXE) == RESET);
|
|
uart->huart.Instance->DR = c;
|
|
return 1;
|
|
}
|
|
|
|
static int stm32_getc(struct rt_serial_device *serial)
|
|
{
|
|
int ch;
|
|
struct stm32_uart *uart;
|
|
RT_ASSERT(serial != RT_NULL);
|
|
uart = (struct stm32_uart *)serial->parent.user_data;
|
|
ch = -1;
|
|
if (__HAL_UART_GET_FLAG(&uart->huart, UART_FLAG_RXNE) != RESET)
|
|
{
|
|
ch = uart->huart.Instance->DR & 0xff;
|
|
}
|
|
return ch;
|
|
}
|
|
|
|
/**
|
|
* Uart common interrupt process. This need add to uart ISR.
|
|
*
|
|
* @param serial serial device
|
|
*/
|
|
static void uart_isr(struct rt_serial_device *serial)
|
|
{
|
|
struct stm32_uart *uart = (struct stm32_uart *) serial->parent.user_data;
|
|
RT_ASSERT(uart != RT_NULL);
|
|
if ((__HAL_UART_GET_FLAG(&uart->huart, UART_FLAG_RXNE) != RESET) && (__HAL_UART_GET_IT_SOURCE(&uart->huart, UART_IT_RXNE) != RESET))
|
|
{
|
|
rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_IND);
|
|
__HAL_UART_CLEAR_FLAG(&uart->huart, UART_FLAG_RXNE);
|
|
}
|
|
}
|
|
|
|
static const struct rt_uart_ops stm32_uart_ops =
|
|
{
|
|
stm32_configure,
|
|
stm32_control,
|
|
stm32_putc,
|
|
stm32_getc,
|
|
};
|
|
|
|
#if defined(RT_USING_UART1)
|
|
/* UART1 device driver structure */
|
|
struct stm32_uart uart1 =
|
|
{
|
|
{USART1},
|
|
USART1_IRQn
|
|
};
|
|
struct rt_serial_device serial1;
|
|
|
|
void USART1_IRQHandler(void)
|
|
{
|
|
/* enter interrupt */
|
|
rt_interrupt_enter();
|
|
uart_isr(&serial1);
|
|
/* leave interrupt */
|
|
rt_interrupt_leave();
|
|
}
|
|
#endif /* RT_USING_UART1 */
|
|
|
|
#if defined(RT_USING_UART2)
|
|
/* UART1 device driver structure */
|
|
struct stm32_uart uart2 =
|
|
{
|
|
{USART2},
|
|
USART2_IRQn
|
|
};
|
|
struct rt_serial_device serial2;
|
|
|
|
void USART2_IRQHandler(void)
|
|
{
|
|
/* enter interrupt */
|
|
rt_interrupt_enter();
|
|
|
|
uart_isr(&serial2);
|
|
|
|
/* leave interrupt */
|
|
rt_interrupt_leave();
|
|
}
|
|
#endif /* RT_USING_UART2 */
|
|
|
|
#if defined(RT_USING_UART3)
|
|
/* UART1 device driver structure */
|
|
struct stm32_uart uart3 =
|
|
{
|
|
{USART3},
|
|
USART3_IRQn
|
|
};
|
|
struct rt_serial_device serial3;
|
|
|
|
void USART3_IRQHandler(void)
|
|
{
|
|
/* enter interrupt */
|
|
rt_interrupt_enter();
|
|
|
|
uart_isr(&serial3);
|
|
|
|
/* leave interrupt */
|
|
rt_interrupt_leave();
|
|
}
|
|
#endif /* RT_USING_UART2 */
|
|
|
|
static void MX_USART_UART_Init(UART_HandleTypeDef *uartHandle);
|
|
|
|
int rt_hw_usart_init(void)
|
|
{
|
|
struct stm32_uart *uart;
|
|
struct serial_configure config = RT_SERIAL_CONFIG_DEFAULT;
|
|
#if defined(RT_USING_UART1)
|
|
uart = &uart1;
|
|
config.baud_rate = BAUD_RATE_115200;
|
|
serial1.ops = &stm32_uart_ops;
|
|
serial1.config = config;
|
|
MX_USART_UART_Init(&uart->huart);
|
|
/* register UART1 device */
|
|
rt_hw_serial_register(&serial1, "uart1",
|
|
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
|
|
uart);
|
|
#endif /* RT_USING_UART1 */
|
|
|
|
#if defined(RT_USING_UART2)
|
|
uart = &uart2;
|
|
config.baud_rate = BAUD_RATE_115200;
|
|
serial2.ops = &stm32_uart_ops;
|
|
serial2.config = config;
|
|
MX_USART_UART_Init(&uart->huart);
|
|
/* register UART1 device */
|
|
rt_hw_serial_register(&serial2, "uart2",
|
|
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
|
|
uart);
|
|
#endif /* RT_USING_UART1 */
|
|
|
|
#if defined(RT_USING_UART3)
|
|
uart = &uart3;
|
|
config.baud_rate = BAUD_RATE_115200;
|
|
serial3.ops = &stm32_uart_ops;
|
|
serial3.config = config;
|
|
MX_USART_UART_Init(&uart->huart);
|
|
/* register UART1 device */
|
|
rt_hw_serial_register(&serial3, "uart3",
|
|
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
|
|
uart);
|
|
#endif /* RT_USING_UART1 */
|
|
return 0;
|
|
}
|
|
INIT_BOARD_EXPORT(rt_hw_usart_init);
|
|
|
|
static void MX_USART_UART_Init(UART_HandleTypeDef *uartHandle)
|
|
{
|
|
rt_err_t result;
|
|
uartHandle->Init.BaudRate = 115200;
|
|
uartHandle->Init.WordLength = UART_WORDLENGTH_8B;
|
|
uartHandle->Init.StopBits = UART_STOPBITS_1;
|
|
uartHandle->Init.Parity = UART_PARITY_NONE;
|
|
uartHandle->Init.Mode = UART_MODE_TX_RX;
|
|
uartHandle->Init.HwFlowCtl = UART_HWCONTROL_NONE;
|
|
uartHandle->Init.OverSampling = UART_OVERSAMPLING_16;
|
|
result = HAL_UART_Init(uartHandle);
|
|
RT_ASSERT(result == HAL_OK);
|
|
|
|
}
|
|
/* USART2 init function */
|
|
|
|
void HAL_UART_MspInit(UART_HandleTypeDef *uartHandle)
|
|
{
|
|
GPIO_InitTypeDef GPIO_InitStruct;
|
|
if (uartHandle->Instance == USART1)
|
|
{
|
|
/* USER CODE BEGIN USART1_MspInit 0 */
|
|
/* USER CODE END USART1_MspInit 0 */
|
|
/* USART1 clock enable */
|
|
__HAL_RCC_USART1_CLK_ENABLE();
|
|
__HAL_RCC_GPIOA_CLK_ENABLE();
|
|
/**USART1 GPIO Configuration
|
|
PA9 ------> USART1_TX
|
|
PA10 ------> USART1_RX
|
|
*/
|
|
GPIO_InitStruct.Pin = GPIO_PIN_9;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
|
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
|
GPIO_InitStruct.Pin = GPIO_PIN_10;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
|
/* USART1 interrupt Init */
|
|
HAL_NVIC_SetPriority(USART1_IRQn, 5, 0);
|
|
HAL_NVIC_EnableIRQ(USART1_IRQn);
|
|
/* USER CODE BEGIN USART1_MspInit 1 */
|
|
/* USER CODE END USART1_MspInit 1 */
|
|
}
|
|
else if (uartHandle->Instance == USART2)
|
|
{
|
|
/* USER CODE BEGIN USART2_MspInit 0 */
|
|
/* USER CODE END USART2_MspInit 0 */
|
|
/* USART2 clock enable */
|
|
__HAL_RCC_USART2_CLK_ENABLE();
|
|
__HAL_RCC_GPIOA_CLK_ENABLE();
|
|
/**USART2 GPIO Configuration
|
|
PA2 ------> USART2_TX
|
|
PA3 ------> USART2_RX
|
|
*/
|
|
GPIO_InitStruct.Pin = GPIO_PIN_2;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
|
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
|
GPIO_InitStruct.Pin = GPIO_PIN_3;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
|
/* USART2 interrupt Init */
|
|
HAL_NVIC_SetPriority(USART2_IRQn, 5, 0);
|
|
HAL_NVIC_EnableIRQ(USART2_IRQn);
|
|
/* USER CODE BEGIN USART2_MspInit 1 */
|
|
|
|
/* USER CODE END USART2_MspInit 1 */
|
|
}
|
|
else if (uartHandle->Instance == USART3)
|
|
{
|
|
/* USER CODE BEGIN USART3_MspInit 0 */
|
|
/* USER CODE END USART3_MspInit 0 */
|
|
/* USART3 clock enable */
|
|
__HAL_RCC_USART3_CLK_ENABLE();
|
|
__HAL_RCC_GPIOB_CLK_ENABLE();
|
|
/**USART3 GPIO Configuration
|
|
PB10 ------> USART3_TX
|
|
PB11 ------> USART3_RX
|
|
*/
|
|
GPIO_InitStruct.Pin = GPIO_PIN_10;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
|
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
|
GPIO_InitStruct.Pin = GPIO_PIN_11;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
|
/* USART3 interrupt Init */
|
|
HAL_NVIC_SetPriority(USART3_IRQn, 5, 0);
|
|
HAL_NVIC_EnableIRQ(USART3_IRQn);
|
|
/* USER CODE BEGIN USART3_MspInit 1 */
|
|
/* USER CODE END USART3_MspInit 1 */
|
|
}
|
|
}
|
|
|
|
void HAL_UART_MspDeInit(UART_HandleTypeDef *uartHandle)
|
|
{
|
|
if (uartHandle->Instance == USART1)
|
|
{
|
|
/* USER CODE BEGIN USART1_MspDeInit 0 */
|
|
/* USER CODE END USART1_MspDeInit 0 */
|
|
/* Peripheral clock disable */
|
|
__HAL_RCC_USART1_CLK_DISABLE();
|
|
/**USART1 GPIO Configuration
|
|
PA9 ------> USART1_TX
|
|
PA10 ------> USART1_RX
|
|
*/
|
|
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9 | GPIO_PIN_10);
|
|
/* USART1 interrupt Deinit */
|
|
HAL_NVIC_DisableIRQ(USART1_IRQn);
|
|
/* USER CODE BEGIN USART1_MspDeInit 1 */
|
|
/* USER CODE END USART1_MspDeInit 1 */
|
|
}
|
|
else if (uartHandle->Instance == USART2)
|
|
{
|
|
/* USER CODE BEGIN USART2_MspDeInit 0 */
|
|
/* USER CODE END USART2_MspDeInit 0 */
|
|
/* Peripheral clock disable */
|
|
__HAL_RCC_USART2_CLK_DISABLE();
|
|
/**USART2 GPIO Configuration
|
|
PA2 ------> USART2_TX
|
|
PA3 ------> USART2_RX
|
|
*/
|
|
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_2 | GPIO_PIN_3);
|
|
/* USART2 interrupt Deinit */
|
|
HAL_NVIC_DisableIRQ(USART2_IRQn);
|
|
/* USER CODE BEGIN USART2_MspDeInit 1 */
|
|
/* USER CODE END USART2_MspDeInit 1 */
|
|
}
|
|
else if (uartHandle->Instance == USART3)
|
|
{
|
|
/* USER CODE BEGIN USART3_MspDeInit 0 */
|
|
/* USER CODE END USART3_MspDeInit 0 */
|
|
/* Peripheral clock disable */
|
|
__HAL_RCC_USART3_CLK_DISABLE();
|
|
/**USART3 GPIO Configuration
|
|
PB10 ------> USART3_TX
|
|
PB11 ------> USART3_RX
|
|
*/
|
|
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_10 | GPIO_PIN_11);
|
|
/* USART3 interrupt Deinit */
|
|
HAL_NVIC_DisableIRQ(USART3_IRQn);
|
|
/* USER CODE BEGIN USART3_MspDeInit 1 */
|
|
/* USER CODE END USART3_MspDeInit 1 */
|
|
}
|
|
}
|