331 lines
7.8 KiB
C
331 lines
7.8 KiB
C
/*
|
|
* Copyright (C) 2018 Shanghai Eastsoft Microelectronics Co., Ltd.
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*
|
|
* Change Logs:
|
|
* Date Author Notes
|
|
* 2019-01-23 wangyq the first version
|
|
*/
|
|
|
|
#include <rthw.h>
|
|
#include <rtthread.h>
|
|
#include <rtdevice.h>
|
|
#include "board.h"
|
|
#include "drv_uart.h"
|
|
#include <ald_gpio.h>
|
|
#include <ald_uart.h>
|
|
|
|
#ifdef RT_USING_SERIAL
|
|
|
|
/* es32 uart driver */
|
|
struct es32_uart
|
|
{
|
|
uart_handle_t huart;
|
|
IRQn_Type irq;
|
|
};
|
|
|
|
static rt_err_t es32f0x_configure(struct rt_serial_device *serial, struct serial_configure *cfg)
|
|
{
|
|
gpio_init_t gpio_init_initstructure;
|
|
struct es32_uart *uart;
|
|
RT_ASSERT(serial != RT_NULL);
|
|
RT_ASSERT(cfg != RT_NULL);
|
|
uart = (struct es32_uart *)serial->parent.user_data;
|
|
|
|
/* Initialize tx pin */
|
|
gpio_init_initstructure.mode = GPIO_MODE_OUTPUT;
|
|
gpio_init_initstructure.odos = GPIO_PUSH_PULL;
|
|
gpio_init_initstructure.pupd = GPIO_PUSH_UP;
|
|
gpio_init_initstructure.odrv = GPIO_OUT_DRIVE_NORMAL;
|
|
gpio_init_initstructure.flt = GPIO_FILTER_DISABLE;
|
|
gpio_init_initstructure.type = GPIO_TYPE_TTL;
|
|
|
|
#ifdef BSP_USING_UART0
|
|
gpio_init_initstructure.func = GPIO_FUNC_3;
|
|
gpio_init(GPIOB, GPIO_PIN_10, &gpio_init_initstructure);
|
|
|
|
/* Initialize rx pin ,the same as txpin except mode*/
|
|
gpio_init_initstructure.mode = GPIO_MODE_INPUT;
|
|
gpio_init(GPIOB, GPIO_PIN_11, &gpio_init_initstructure);
|
|
|
|
NVIC_EnableIRQ(UART0_IRQn);
|
|
#endif /* uart0 gpio init */
|
|
|
|
#ifdef BSP_USING_UART1
|
|
gpio_init_initstructure.func = GPIO_FUNC_3;
|
|
gpio_init(GPIOC, GPIO_PIN_10, &gpio_init_initstructure);
|
|
|
|
/* Initialize rx pin ,the same as txpin except mode*/
|
|
gpio_init_initstructure.mode = GPIO_MODE_INPUT;
|
|
gpio_init(GPIOC, GPIO_PIN_11, &gpio_init_initstructure);
|
|
|
|
NVIC_EnableIRQ(UART1_IRQn);
|
|
#endif /* uart1 gpio init */
|
|
|
|
#ifdef BSP_USING_UART2
|
|
gpio_init_initstructure.func = GPIO_FUNC_5;
|
|
gpio_init(GPIOC, GPIO_PIN_12, &gpio_init_initstructure);
|
|
|
|
/* Initialize rx pin ,the same as txpin except mode*/
|
|
gpio_init_initstructure.mode = GPIO_MODE_INPUT;
|
|
gpio_init(GPIOD, GPIO_PIN_2, &gpio_init_initstructure);
|
|
|
|
NVIC_EnableIRQ(BS16T1_UART2_IRQn);
|
|
#endif /* uart2 gpio init */
|
|
|
|
#ifdef BSP_USING_UART3
|
|
gpio_init_initstructure.func = GPIO_FUNC_4;
|
|
gpio_init(GPIOC, GPIO_PIN_4, &gpio_init_initstructure);
|
|
|
|
/* Initialize rx pin ,the same as txpin except mode*/
|
|
gpio_init_initstructure.mode = GPIO_MODE_INPUT;
|
|
gpio_init(GPIOC, GPIO_PIN_5, &gpio_init_initstructure);
|
|
|
|
NVIC_EnableIRQ(BS16T2_UART3_IRQn);
|
|
#endif /* uart3 gpio init */
|
|
|
|
uart->huart.init.mode = UART_MODE_UART;
|
|
uart->huart.init.baud = cfg->baud_rate;
|
|
uart->huart.init.word_length = (uart_word_length_t)(cfg->data_bits - 5);
|
|
uart->huart.init.parity = (uart_parity_t)(cfg->parity == PARITY_EVEN ? UART_PARITY_EVEN : cfg->parity);
|
|
uart->huart.init.fctl = UART_HW_FLOW_CTL_DISABLE;
|
|
uart_init(&uart->huart);
|
|
|
|
if (cfg->bit_order == BIT_ORDER_MSB)
|
|
{
|
|
UART_MSB_FIRST_ENABLE(&uart->huart);
|
|
}
|
|
else
|
|
{
|
|
UART_MSB_FIRST_DISABLE(&uart->huart);
|
|
}
|
|
|
|
if (cfg->invert == NRZ_INVERTED)
|
|
{
|
|
UART_DATA_INV_ENABLE(&uart->huart);
|
|
}
|
|
else
|
|
{
|
|
UART_DATA_INV_DISABLE(&uart->huart);
|
|
}
|
|
|
|
/*enable rx int*/
|
|
uart_interrupt_config(&uart->huart, UART_IT_RXRD, ENABLE);
|
|
|
|
return RT_EOK;
|
|
}
|
|
|
|
static rt_err_t es32f0x_control(struct rt_serial_device *serial, int cmd, void *arg)
|
|
{
|
|
struct es32_uart *uart;
|
|
RT_ASSERT(serial != RT_NULL);
|
|
|
|
uart = (struct es32_uart *)serial->parent.user_data;
|
|
switch (cmd)
|
|
{
|
|
case RT_DEVICE_CTRL_CLR_INT:
|
|
/* disable rx irq */
|
|
NVIC_DisableIRQ(uart->irq);
|
|
/* disable interrupt */
|
|
uart_interrupt_config(&uart->huart, UART_IT_RXRD, DISABLE);
|
|
break;
|
|
|
|
case RT_DEVICE_CTRL_SET_INT:
|
|
/* enable rx irq */
|
|
NVIC_EnableIRQ(uart->irq);
|
|
/* enable interrupt */
|
|
uart_interrupt_config(&uart->huart, UART_IT_RXRD, ENABLE);
|
|
break;
|
|
}
|
|
|
|
return RT_EOK;
|
|
}
|
|
|
|
static int es32f0x_putc(struct rt_serial_device *serial, char c)
|
|
{
|
|
struct es32_uart *uart;
|
|
RT_ASSERT(serial != RT_NULL);
|
|
uart = (struct es32_uart *)serial->parent.user_data;
|
|
|
|
while (!(uart->huart.perh->SR & 0x40)) ;
|
|
WRITE_REG(uart->huart.perh->TBR, c);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int es32f0x_getc(struct rt_serial_device *serial)
|
|
{
|
|
int ch = -1;
|
|
struct es32_uart *uart;
|
|
|
|
RT_ASSERT(serial != RT_NULL);
|
|
uart = (struct es32_uart *)serial->parent.user_data;
|
|
|
|
if (uart->huart.perh->SR & 0x01)
|
|
{
|
|
ch = (uint8_t)(uart->huart.perh->RBR & 0xFF);
|
|
}
|
|
|
|
return ch;
|
|
}
|
|
|
|
static const struct rt_uart_ops es32f0x_uart_ops =
|
|
{
|
|
es32f0x_configure,
|
|
es32f0x_control,
|
|
es32f0x_putc,
|
|
es32f0x_getc,
|
|
};
|
|
|
|
#ifdef BSP_USING_UART0
|
|
/* UART0 device driver structure */
|
|
struct es32_uart uart0 =
|
|
{
|
|
{UART0},
|
|
UART0_IRQn
|
|
};
|
|
|
|
struct rt_serial_device serial0;
|
|
|
|
void UART0_Handler(void)
|
|
{
|
|
/* enter interrupt */
|
|
rt_interrupt_enter();
|
|
|
|
if (UART0->RIF & 0x01)
|
|
{
|
|
rt_hw_serial_isr(&serial0, RT_SERIAL_EVENT_RX_IND);
|
|
}
|
|
/* leave interrupt */
|
|
rt_interrupt_leave();
|
|
}
|
|
#endif /* BSP_USING_UART0 */
|
|
|
|
#ifdef BSP_USING_UART1
|
|
/* UART1 device driver structure */
|
|
struct es32_uart uart1 =
|
|
{
|
|
{UART1},
|
|
UART1_IRQn
|
|
};
|
|
|
|
struct rt_serial_device serial1;
|
|
|
|
void UART1_Handler(void)
|
|
{
|
|
/* enter interrupt */
|
|
rt_interrupt_enter();
|
|
|
|
if (UART1->RIF & 0x01)
|
|
{
|
|
rt_hw_serial_isr(&serial1, RT_SERIAL_EVENT_RX_IND);
|
|
}
|
|
/* leave interrupt */
|
|
rt_interrupt_leave();
|
|
}
|
|
#endif /* BSP_USING_UART1 */
|
|
|
|
#ifdef BSP_USING_UART2
|
|
/* UART2 device driver structure */
|
|
struct es32_uart uart2 =
|
|
{
|
|
{UART2},
|
|
BS16T1_UART2_IRQn
|
|
};
|
|
|
|
struct rt_serial_device serial2;
|
|
|
|
void BS16T1_UART2_Handler(void)
|
|
{
|
|
/* enter interrupt */
|
|
rt_interrupt_enter();
|
|
|
|
if (UART2->RIF & 0x01)
|
|
{
|
|
rt_hw_serial_isr(&serial2, RT_SERIAL_EVENT_RX_IND);
|
|
}
|
|
/* leave interrupt */
|
|
rt_interrupt_leave();
|
|
}
|
|
#endif /* BSP_USING_UART2 */
|
|
|
|
#ifdef BSP_USING_UART3
|
|
/* UART3 device driver structure */
|
|
struct es32_uart uart3 =
|
|
{
|
|
{UART3},
|
|
BS16T2_UART3_IRQn
|
|
};
|
|
|
|
struct rt_serial_device serial3;
|
|
|
|
void BS16T2_UART3_Handler(void)
|
|
{
|
|
/* enter interrupt */
|
|
rt_interrupt_enter();
|
|
|
|
if (UART3->RIF & 0x01)
|
|
{
|
|
rt_hw_serial_isr(&serial3, RT_SERIAL_EVENT_RX_IND);
|
|
}
|
|
/* leave interrupt */
|
|
rt_interrupt_leave();
|
|
}
|
|
#endif /* BSP_USING_UART3 */
|
|
|
|
int rt_hw_uart_init(void)
|
|
{
|
|
struct es32_uart *uart;
|
|
struct serial_configure config = RT_SERIAL_CONFIG_DEFAULT;
|
|
|
|
#ifdef BSP_USING_UART0
|
|
uart = &uart0;
|
|
serial0.ops = &es32f0x_uart_ops;
|
|
serial0.config = config;
|
|
|
|
/* register UART0 device */
|
|
rt_hw_serial_register(&serial0, "uart0",
|
|
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
|
|
uart);
|
|
#endif /* BSP_USING_UART0 */
|
|
|
|
#ifdef BSP_USING_UART1
|
|
uart = &uart1;
|
|
serial1.ops = &es32f0x_uart_ops;
|
|
serial1.config = config;
|
|
|
|
/* register UART1 device */
|
|
rt_hw_serial_register(&serial1, "uart1",
|
|
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
|
|
uart);
|
|
#endif /* BSP_USING_UART1 */
|
|
|
|
#ifdef BSP_USING_UART2
|
|
uart = &uart2;
|
|
serial2.ops = &es32f0x_uart_ops;
|
|
serial2.config = config;
|
|
|
|
/* register UART2 device */
|
|
rt_hw_serial_register(&serial2, "uart2",
|
|
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
|
|
uart);
|
|
#endif /* BSP_USING_UART2 */
|
|
|
|
#ifdef BSP_USING_UART3
|
|
uart = &uart3;
|
|
serial3.ops = &es32f0x_uart_ops;
|
|
serial3.config = config;
|
|
|
|
/* register UART3 device */
|
|
rt_hw_serial_register(&serial3, "uart3",
|
|
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
|
|
uart);
|
|
#endif /* BSP_USING_UART3 */
|
|
|
|
return 0;
|
|
}
|
|
INIT_BOARD_EXPORT(rt_hw_uart_init);
|
|
|
|
#endif
|