3458 lines
95 KiB
C
3458 lines
95 KiB
C
/**
|
|
******************************************************************************
|
|
* @file system_at32f4xx.c
|
|
* @author Artery Technology
|
|
* @version V1.0.0
|
|
* @date 2019-05-27
|
|
* @brief CMSIS Cortex-M4 system source file
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
|
|
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
|
|
* TIME. AS A RESULT, ARTERYTEK SHALL NOT BE HELD LIABLE FOR ANY
|
|
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
|
|
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
|
|
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
|
|
*
|
|
* <h2><center>© COPYRIGHT 2018 ArteryTek</center></h2>
|
|
******************************************************************************
|
|
*/
|
|
|
|
/** @addtogroup CMSIS
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup at32f4xx_system
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup at32f4xx_System_Private_Includes
|
|
* @{
|
|
*/
|
|
|
|
#include "at32f4xx.h"
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup at32f4xx_System_Private_TypesDefinitions
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup at32f4xx_System_Private_Defines
|
|
* @{
|
|
*/
|
|
|
|
/*!< Uncomment the line corresponding to the desired System clock (SYSCLK)
|
|
frequency (after reset the HSI is used as SYSCLK source)
|
|
|
|
IMPORTANT NOTE:
|
|
==============
|
|
1. After each device reset the HSI is used as System clock source.
|
|
|
|
2. Please make sure that the selected System clock doesn't exceed your device's
|
|
maximum frequency.
|
|
|
|
3. If none of the define below is enabled, the HSI is used as System clock
|
|
source.
|
|
|
|
4. The System clock configuration functions provided within this file assume that:
|
|
- For at32f4xx devices, an external 8MHz crystal is used to drive the System clock.
|
|
If you are using different crystal you have to adapt those functions accordingly.
|
|
|
|
Clock (MHz)
|
|
PLL from HSE or HSI
|
|
SYSCLK HCLK PCLK2 PCLK1
|
|
24 24 24 24
|
|
36 36 36 36
|
|
48 48 48 24
|
|
56 56 56 28
|
|
72 72 72 36
|
|
96 96 48 48
|
|
108 108 54 54
|
|
120 120 60 60
|
|
144 144 72 72
|
|
150 150 75 75
|
|
168 168 84 84
|
|
176 176 88 88
|
|
192 192 96 96
|
|
200 200 100 100
|
|
224 224 112 112
|
|
240 240 120 120
|
|
*/
|
|
|
|
#if defined (AT32F403xx) || defined (AT32F413xx) || \
|
|
defined (AT32F415xx) || defined (AT32F403Axx)|| \
|
|
defined (AT32F407xx)
|
|
/* #define SYSCLK_FREQ_HSE HSE_VALUE */
|
|
/* #define SYSCLK_FREQ_24MHz 24000000 */
|
|
/* #define SYSCLK_FREQ_36MHz 36000000 */
|
|
/* #define SYSCLK_FREQ_48MHz 48000000 */
|
|
/* #define SYSCLK_FREQ_56MHz 56000000 */
|
|
/* #define SYSCLK_FREQ_72MHz 72000000 */
|
|
/* #define SYSCLK_FREQ_96MHz 96000000 */
|
|
/* #define SYSCLK_FREQ_108MHz 108000000 */
|
|
/* #define SYSCLK_FREQ_120MHz 120000000 */
|
|
/* #define SYSCLK_FREQ_144MHz 144000000 */
|
|
/* #define SYSCLK_FREQ_24MHz_HSI 24000000 */
|
|
/* #define SYSCLK_FREQ_36MHz_HSI 36000000 */
|
|
/* #define SYSCLK_FREQ_48MHz_HSI 48000000 */
|
|
/* #define SYSCLK_FREQ_56MHz_HSI 56000000 */
|
|
/* #define SYSCLK_FREQ_72MHz_HSI 72000000 */
|
|
/* #define SYSCLK_FREQ_96MHz_HSI 96000000 */
|
|
/* #define SYSCLK_FREQ_108MHz_HSI 108000000 */
|
|
/* #define SYSCLK_FREQ_120MHz_HSI 120000000 */
|
|
/* #define SYSCLK_FREQ_144MHz_HSI 144000000 */
|
|
#endif
|
|
|
|
#if defined (AT32F415xx)
|
|
/* #define SYSCLK_FREQ_150MHz 150000000 */
|
|
/* #define SYSCLK_FREQ_150MHz_HSI 150000000 */
|
|
#endif
|
|
|
|
#if defined (AT32F403xx) || defined (AT32F413xx) || \
|
|
defined (AT32F403Axx)|| defined (AT32F407xx)
|
|
/* #define SYSCLK_FREQ_168MHz 168000000 */
|
|
/* #define SYSCLK_FREQ_176MHz 176000000 */
|
|
/* #define SYSCLK_FREQ_192MHz 192000000 */
|
|
#define SYSCLK_FREQ_200MHz 200000000
|
|
/* #define SYSCLK_FREQ_168MHz_HSI 168000000 */
|
|
/* #define SYSCLK_FREQ_176MHz_HSI 176000000 */
|
|
/* #define SYSCLK_FREQ_192MHz_HSI 192000000 */
|
|
/* #define SYSCLK_FREQ_200MHz_HSI 200000000 */
|
|
#endif
|
|
|
|
#if defined (AT32F403Axx)|| defined (AT32F407xx)
|
|
/* #define SYSCLK_FREQ_224MHz 224000000 */
|
|
/* #define SYSCLK_FREQ_240MHz 240000000 */
|
|
/* #define SYSCLK_FREQ_224MHz_HSI 224000000 */
|
|
/* #define SYSCLK_FREQ_240MHz_HSI 240000000 */
|
|
#endif
|
|
|
|
/*!< Uncomment the following line if you need to use external SRAM mounted
|
|
(AT32 High density and XL-density devices) as data memory */
|
|
|
|
/* #define DATA_IN_ExtSRAM */
|
|
|
|
/*!< Uncomment the following line if you need to relocate your vector Table in
|
|
Internal SRAM. */
|
|
/* #define VECT_TAB_SRAM */
|
|
#define VECT_TAB_OFFSET 0x0 /*!< Vector Table base offset field.
|
|
This value must be a multiple of 0x200. */
|
|
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup at32f4xx_System_Private_Macros
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup at32f4xx_System_Private_Variables
|
|
* @{
|
|
*/
|
|
|
|
/*******************************************************************************
|
|
* Clock Definitions
|
|
*******************************************************************************/
|
|
#ifdef SYSCLK_FREQ_HSE
|
|
uint32_t SystemCoreClock = SYSCLK_FREQ_HSE; /*!< System Clock Frequency (Core Clock) */
|
|
#elif defined SYSCLK_FREQ_24MHz
|
|
uint32_t SystemCoreClock = SYSCLK_FREQ_24MHz; /*!< System Clock Frequency (Core Clock) */
|
|
#elif defined SYSCLK_FREQ_36MHz
|
|
uint32_t SystemCoreClock = SYSCLK_FREQ_36MHz; /*!< System Clock Frequency (Core Clock) */
|
|
#elif defined SYSCLK_FREQ_48MHz
|
|
uint32_t SystemCoreClock = SYSCLK_FREQ_48MHz; /*!< System Clock Frequency (Core Clock) */
|
|
#elif defined SYSCLK_FREQ_56MHz
|
|
uint32_t SystemCoreClock = SYSCLK_FREQ_56MHz; /*!< System Clock Frequency (Core Clock) */
|
|
#elif defined SYSCLK_FREQ_72MHz
|
|
uint32_t SystemCoreClock = SYSCLK_FREQ_72MHz; /*!< System Clock Frequency (Core Clock) */
|
|
#elif defined SYSCLK_FREQ_96MHz
|
|
uint32_t SystemCoreClock = SYSCLK_FREQ_96MHz; /*!< System Clock Frequency (Core Clock) */
|
|
#elif defined SYSCLK_FREQ_108MHz
|
|
uint32_t SystemCoreClock = SYSCLK_FREQ_108MHz; /*!< System Clock Frequency (Core Clock) */
|
|
#elif defined SYSCLK_FREQ_120MHz
|
|
uint32_t SystemCoreClock = SYSCLK_FREQ_120MHz; /*!< System Clock Frequency (Core Clock) */
|
|
#elif defined SYSCLK_FREQ_144MHz
|
|
uint32_t SystemCoreClock = SYSCLK_FREQ_144MHz; /*!< System Clock Frequency (Core Clock) */
|
|
#elif defined SYSCLK_FREQ_150MHz
|
|
uint32_t SystemCoreClock = SYSCLK_FREQ_150MHz; /*!< System Clock Frequency (Core Clock) */
|
|
#elif defined SYSCLK_FREQ_168MHz
|
|
uint32_t SystemCoreClock = SYSCLK_FREQ_168MHz; /*!< System Clock Frequency (Core Clock) */
|
|
#elif defined SYSCLK_FREQ_176MHz
|
|
uint32_t SystemCoreClock = SYSCLK_FREQ_176MHz; /*!< System Clock Frequency (Core Clock) */
|
|
#elif defined SYSCLK_FREQ_192MHz
|
|
uint32_t SystemCoreClock = SYSCLK_FREQ_192MHz; /*!< System Clock Frequency (Core Clock) */
|
|
#elif defined SYSCLK_FREQ_200MHz
|
|
uint32_t SystemCoreClock = SYSCLK_FREQ_200MHz; /*!< System Clock Frequency (Core Clock) */
|
|
#elif defined SYSCLK_FREQ_224MHz
|
|
uint32_t SystemCoreClock = SYSCLK_FREQ_224MHz; /*!< System Clock Frequency (Core Clock) */
|
|
#elif defined SYSCLK_FREQ_240MHz
|
|
uint32_t SystemCoreClock = SYSCLK_FREQ_240MHz; /*!< System Clock Frequency (Core Clock) */
|
|
#elif defined SYSCLK_FREQ_24MHz_HSI
|
|
uint32_t SystemCoreClock = SYSCLK_FREQ_24MHz_HSI; /*!< System Clock Frequency (Core Clock) */
|
|
#elif defined SYSCLK_FREQ_36MHz_HSI
|
|
uint32_t SystemCoreClock = SYSCLK_FREQ_36MHz_HSI; /*!< System Clock Frequency (Core Clock) */
|
|
#elif defined SYSCLK_FREQ_48MHz_HSI
|
|
uint32_t SystemCoreClock = SYSCLK_FREQ_48MHz_HSI; /*!< System Clock Frequency (Core Clock) */
|
|
#elif defined SYSCLK_FREQ_56MHz_HSI
|
|
uint32_t SystemCoreClock = SYSCLK_FREQ_56MHz_HSI; /*!< System Clock Frequency (Core Clock) */
|
|
#elif defined SYSCLK_FREQ_72MHz_HSI
|
|
uint32_t SystemCoreClock = SYSCLK_FREQ_72MHz_HSI; /*!< System Clock Frequency (Core Clock) */
|
|
#elif defined SYSCLK_FREQ_96MHz_HSI
|
|
uint32_t SystemCoreClock = SYSCLK_FREQ_96MHz_HSI; /*!< System Clock Frequency (Core Clock) */
|
|
#elif defined SYSCLK_FREQ_108MHz_HSI
|
|
uint32_t SystemCoreClock = SYSCLK_FREQ_108MHz_HSI; /*!< System Clock Frequency (Core Clock) */
|
|
#elif defined SYSCLK_FREQ_120MHz_HSI
|
|
uint32_t SystemCoreClock = SYSCLK_FREQ_120MHz_HSI; /*!< System Clock Frequency (Core Clock) */
|
|
#elif defined SYSCLK_FREQ_144MHz_HSI
|
|
uint32_t SystemCoreClock = SYSCLK_FREQ_144MHz_HSI; /*!< System Clock Frequency (Core Clock) */
|
|
#elif defined SYSCLK_FREQ_150MHz_HSI
|
|
uint32_t SystemCoreClock = SYSCLK_FREQ_150MHz_HSI; /*!< System Clock Frequency (Core Clock) */
|
|
#elif defined SYSCLK_FREQ_168MHz_HSI
|
|
uint32_t SystemCoreClock = SYSCLK_FREQ_168MHz_HSI; /*!< System Clock Frequency (Core Clock) */
|
|
#elif defined SYSCLK_FREQ_176MHz_HSI
|
|
uint32_t SystemCoreClock = SYSCLK_FREQ_176MHz_HSI; /*!< System Clock Frequency (Core Clock) */
|
|
#elif defined SYSCLK_FREQ_192MHz_HSI
|
|
uint32_t SystemCoreClock = SYSCLK_FREQ_192MHz_HSI; /*!< System Clock Frequency (Core Clock) */
|
|
#elif defined SYSCLK_FREQ_200MHz_HSI
|
|
uint32_t SystemCoreClock = SYSCLK_FREQ_200MHz_HSI; /*!< System Clock Frequency (Core Clock) */
|
|
#elif defined SYSCLK_FREQ_224MHz_HSI
|
|
uint32_t SystemCoreClock = SYSCLK_FREQ_224MHz_HSI; /*!< System Clock Frequency (Core Clock) */
|
|
#elif defined SYSCLK_FREQ_240MHz_HSI
|
|
uint32_t SystemCoreClock = SYSCLK_FREQ_240MHz_HSI; /*!< System Clock Frequency (Core Clock) */
|
|
#else /*!< HSI Selected as System Clock source */
|
|
#define SYSCLK_FREQ_HSI HSI_VALUE
|
|
uint32_t SystemCoreClock = HSI_VALUE; /*!< System Clock Frequency (Core Clock) */
|
|
#endif
|
|
|
|
__I uint8_t AHBPscTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup at32f4xx_System_Private_FunctionPrototypes
|
|
* @{
|
|
*/
|
|
|
|
static void SetSysClock(void);
|
|
|
|
#ifdef SYSCLK_FREQ_HSE
|
|
static void SetSysClockToHSE(void);
|
|
#elif defined SYSCLK_FREQ_24MHz
|
|
static void SetSysClockTo24M(void);
|
|
#elif defined SYSCLK_FREQ_36MHz
|
|
static void SetSysClockTo36M(void);
|
|
#elif defined SYSCLK_FREQ_48MHz
|
|
static void SetSysClockTo48M(void);
|
|
#elif defined SYSCLK_FREQ_56MHz
|
|
static void SetSysClockTo56M(void);
|
|
#elif defined SYSCLK_FREQ_72MHz
|
|
static void SetSysClockTo72M(void);
|
|
#elif defined SYSCLK_FREQ_96MHz
|
|
static void SetSysClockTo96M(void);
|
|
#elif defined SYSCLK_FREQ_108MHz
|
|
static void SetSysClockTo108M(void);
|
|
#elif defined SYSCLK_FREQ_120MHz
|
|
static void SetSysClockTo120M(void);
|
|
#elif defined SYSCLK_FREQ_144MHz
|
|
static void SetSysClockTo144M(void);
|
|
#elif defined SYSCLK_FREQ_150MHz
|
|
static void SetSysClockTo150M(void);
|
|
#elif defined SYSCLK_FREQ_168MHz
|
|
static void SetSysClockTo168M(void);
|
|
#elif defined SYSCLK_FREQ_176MHz
|
|
static void SetSysClockTo176M(void);
|
|
#elif defined SYSCLK_FREQ_192MHz
|
|
static void SetSysClockTo192M(void);
|
|
#elif defined SYSCLK_FREQ_200MHz
|
|
static void SetSysClockTo200M(void);
|
|
#elif defined SYSCLK_FREQ_224MHz
|
|
static void SetSysClockTo224M(void);
|
|
#elif defined SYSCLK_FREQ_240MHz
|
|
static void SetSysClockTo240M(void);
|
|
#elif defined SYSCLK_FREQ_24MHz_HSI
|
|
static void SetSysClockTo24MHSI(void);
|
|
#elif defined SYSCLK_FREQ_36MHz_HSI
|
|
static void SetSysClockTo36MHSI(void);
|
|
#elif defined SYSCLK_FREQ_48MHz_HSI
|
|
static void SetSysClockTo48MHSI(void);
|
|
#elif defined SYSCLK_FREQ_56MHz_HSI
|
|
static void SetSysClockTo56MHSI(void);
|
|
#elif defined SYSCLK_FREQ_72MHz_HSI
|
|
static void SetSysClockTo72MHSI(void);
|
|
#elif defined SYSCLK_FREQ_96MHz_HSI
|
|
static void SetSysClockTo96MHSI(void);
|
|
#elif defined SYSCLK_FREQ_108MHz_HSI
|
|
static void SetSysClockTo108MHSI(void);
|
|
#elif defined SYSCLK_FREQ_120MHz_HSI
|
|
static void SetSysClockTo120MHSI(void);
|
|
#elif defined SYSCLK_FREQ_144MHz_HSI
|
|
static void SetSysClockTo144MHSI(void);
|
|
#elif defined SYSCLK_FREQ_150MHz_HSI
|
|
static void SetSysClockTo150MHSI(void);
|
|
#elif defined SYSCLK_FREQ_168MHz_HSI
|
|
static void SetSysClockTo168MHSI(void);
|
|
#elif defined SYSCLK_FREQ_176MHz_HSI
|
|
static void SetSysClockTo176MHSI(void);
|
|
#elif defined SYSCLK_FREQ_192MHz_HSI
|
|
static void SetSysClockTo192MHSI(void);
|
|
#elif defined SYSCLK_FREQ_200MHz_HSI
|
|
static void SetSysClockTo200MHSI(void);
|
|
#elif defined SYSCLK_FREQ_224MHz_HSI
|
|
static void SetSysClockTo224MHSI(void);
|
|
#elif defined SYSCLK_FREQ_240MHz_HSI
|
|
static void SetSysClockTo240MHSI(void);
|
|
#endif
|
|
|
|
#ifdef DATA_IN_ExtSRAM
|
|
static void SystemInit_ExtMemCtrl(void);
|
|
#endif /* DATA_IN_ExtSRAM */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup at32f4xx_System_Private_Functions
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Setup the microcontroller system
|
|
* Initialize the Embedded Flash Interface, the PLL and update the
|
|
* SystemCoreClock variable.
|
|
* @note This function should be used only after reset.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
void SystemInit (void)
|
|
{
|
|
#if defined (AT32F415xx)
|
|
/* Enable low power mode, 0x40007050[bit2] */
|
|
RCC_APB1PeriphClockCmd(RCC_APB1PERIPH_PWR, ENABLE);
|
|
*(volatile uint8_t *)(0x40007050) |= (uint8_t)(0x1 << 2);
|
|
RCC_APB1PeriphClockCmd(RCC_APB1PERIPH_PWR, DISABLE);
|
|
#endif
|
|
|
|
#if defined (__FPU_USED) && (__FPU_USED == 1U)
|
|
SCB->CPACR |= ((3U << 10U * 2U) | /* set CP10 Full Access */
|
|
(3U << 11U * 2U) ); /* set CP11 Full Access */
|
|
#endif
|
|
|
|
/* Reset the RCC clock configuration to the default reset state(for debug purpose) */
|
|
/* Set HSIEN bit */
|
|
BIT_SET(RCC->CTRL, RCC_CTRL_HSIEN);
|
|
|
|
/* Reset SW, AHBPSC, APB1PSC, APB2PSC, ADCPSC and CLKOUT bits */
|
|
BIT_CLEAR(RCC->CFG, RCC_CFG_SYSCLKSEL | RCC_CFG_AHBPSC | \
|
|
RCC_CFG_APB1PSC | RCC_CFG_APB2PSC | \
|
|
RCC_CFG_ADCPSC | RCC_CFG_CLKOUT);
|
|
|
|
/* Reset HSEEN, HSECFDEN and PLLEN bits */
|
|
BIT_CLEAR(RCC->CTRL, RCC_CTRL_HSEEN | RCC_CTRL_HSECFDEN | \
|
|
RCC_CTRL_PLLEN);
|
|
|
|
/* Reset HSEBYPS bit */
|
|
BIT_CLEAR(RCC->CTRL, RCC_CTRL_HSEBYPS);
|
|
|
|
/* Reset PLLRC, PLLHSEPSC, PLLMUL, USBPSC and PLLRANGE bits */
|
|
BIT_CLEAR(RCC->CFG, RCC_CFG_PLLRC | RCC_CFG_PLLHSEPSC | \
|
|
RCC_CFG_PLLMULT | RCC_CFG_USBPSC | RCC_CFG_PLLRANGE);
|
|
|
|
/* Reset USB768B, CLKOUT[3], HSICAL_KEY[7:0] */
|
|
BIT_CLEAR(RCC->MISC, 0x010100FF);
|
|
|
|
/* Disable all interrupts and clear pending bits */
|
|
RCC->CLKINT = RCC_CLKINT_LSISTBLFC | RCC_CLKINT_LSESTBLFC | \
|
|
RCC_CLKINT_HSISTBLFC | RCC_CLKINT_HSESTBLFC | \
|
|
RCC_CLKINT_PLLSTBLFC | RCC_CLKINT_HSECFDFC;
|
|
|
|
#ifdef DATA_IN_ExtSRAM
|
|
SystemInit_ExtMemCtrl();
|
|
#endif /* DATA_IN_ExtSRAM */
|
|
|
|
/* Configure the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers */
|
|
/* Configure the Flash Latency cycles and enable prefetch buffer */
|
|
SetSysClock();
|
|
|
|
#ifdef VECT_TAB_SRAM
|
|
SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */
|
|
#else
|
|
SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */
|
|
#endif
|
|
}
|
|
|
|
/**
|
|
* @brief Update SystemCoreClock variable according to Clock Register Values.
|
|
* The SystemCoreClock variable contains the core clock (HCLK), it can
|
|
* be used by the user application to setup the SysTick timer or configure
|
|
* other parameters.
|
|
*
|
|
* @note Each time the core clock (HCLK) changes, this function must be called
|
|
* to update SystemCoreClock variable value. Otherwise, any configuration
|
|
* based on this variable will be incorrect.
|
|
*
|
|
* @note - The system frequency computed by this function is not the real
|
|
* frequency in the chip. It is calculated based on the predefined
|
|
* constant and the selected clock source:
|
|
*
|
|
* - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
|
|
*
|
|
* - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
|
|
*
|
|
* - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
|
|
* or HSI_VALUE(*) multiplied by the PLL factors.
|
|
*
|
|
* (*) HSI_VALUE is a constant defined in at32f4xx.h file (default value
|
|
* 8 MHz) but the real value may vary depending on the variations
|
|
* in voltage and temperature.
|
|
*
|
|
* (**) HSE_VALUE is a constant defined in at32f4xx.h file (default value
|
|
* 8 MHz or 25 MHz, depedning on the product used), user has to ensure
|
|
* that HSE_VALUE is same as the real frequency of the crystal used.
|
|
* Otherwise, this function may have wrong result.
|
|
*
|
|
* - The result of this function could be not correct when using fractional
|
|
* value for HSE crystal.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
void SystemCoreClockUpdate (void)
|
|
{
|
|
uint32_t tmp = 0, pllmult = 0, pllrefclk = 0, tempcfg = 0;
|
|
|
|
/* Get SYSCLK source -------------------------------------------------------*/
|
|
tmp = RCC->CFG & RCC_CFG_SYSCLKSTS;
|
|
|
|
switch (tmp)
|
|
{
|
|
case RCC_CFG_SYSCLKSTS_HSI: /* HSI used as system clock */
|
|
SystemCoreClock = HSI_VALUE;
|
|
break;
|
|
|
|
case RCC_CFG_SYSCLKSTS_HSE: /* HSE used as system clock */
|
|
SystemCoreClock = HSE_VALUE;
|
|
break;
|
|
|
|
case RCC_CFG_SYSCLKSTS_PLL: /* PLL used as system clock */
|
|
/* Get PLL clock source and multiplication factor ----------------------*/
|
|
pllrefclk = RCC->CFG & RCC_CFG_PLLRC;
|
|
tempcfg = RCC->CFG;
|
|
pllmult = RCC_GET_PLLMULT(tempcfg);
|
|
|
|
if (pllrefclk == RCC_PLLRefClk_HSI_Div2)
|
|
{
|
|
/* HSI oscillator clock divided by 2 selected as PLL clock entry */
|
|
SystemCoreClock = (HSI_VALUE >> 1) * pllmult;
|
|
}
|
|
else
|
|
{
|
|
/* HSE selected as PLL clock entry */
|
|
if ((RCC->CFG & RCC_CFG_PLLHSEPSC) != (uint32_t)RESET)
|
|
{
|
|
/* HSE oscillator clock divided by 2 */
|
|
SystemCoreClock = (HSE_VALUE >> 1) * pllmult;
|
|
}
|
|
else
|
|
{
|
|
SystemCoreClock = HSE_VALUE * pllmult;
|
|
}
|
|
}
|
|
|
|
break;
|
|
|
|
default:
|
|
SystemCoreClock = HSI_VALUE;
|
|
break;
|
|
}
|
|
|
|
/* Compute HCLK clock frequency ----------------*/
|
|
/* Get HCLK prescaler */
|
|
tmp = AHBPscTable[((RCC->CFG & RCC_CFG_AHBPSC) >> 4)];
|
|
/* HCLK clock frequency */
|
|
SystemCoreClock >>= tmp;
|
|
}
|
|
|
|
/**
|
|
* @brief Configures the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void SetSysClock(void)
|
|
{
|
|
#ifdef SYSCLK_FREQ_HSE
|
|
SetSysClockToHSE();
|
|
#elif defined SYSCLK_FREQ_24MHz
|
|
SetSysClockTo24M();
|
|
#elif defined SYSCLK_FREQ_36MHz
|
|
SetSysClockTo36M();
|
|
#elif defined SYSCLK_FREQ_48MHz
|
|
SetSysClockTo48M();
|
|
#elif defined SYSCLK_FREQ_56MHz
|
|
SetSysClockTo56M();
|
|
#elif defined SYSCLK_FREQ_72MHz
|
|
SetSysClockTo72M();
|
|
#elif defined SYSCLK_FREQ_96MHz
|
|
SetSysClockTo96M();
|
|
#elif defined SYSCLK_FREQ_108MHz
|
|
SetSysClockTo108M();
|
|
#elif defined SYSCLK_FREQ_120MHz
|
|
SetSysClockTo120M();
|
|
#elif defined SYSCLK_FREQ_144MHz
|
|
SetSysClockTo144M();
|
|
#elif defined SYSCLK_FREQ_150MHz
|
|
SetSysClockTo150M();
|
|
#elif defined SYSCLK_FREQ_168MHz
|
|
SetSysClockTo168M();
|
|
#elif defined SYSCLK_FREQ_176MHz
|
|
SetSysClockTo176M();
|
|
#elif defined SYSCLK_FREQ_192MHz
|
|
SetSysClockTo192M();
|
|
#elif defined SYSCLK_FREQ_200MHz
|
|
SetSysClockTo200M();
|
|
#elif defined SYSCLK_FREQ_224MHz
|
|
SetSysClockTo224M();
|
|
#elif defined SYSCLK_FREQ_240MHz
|
|
SetSysClockTo240M();
|
|
#elif defined SYSCLK_FREQ_24MHz_HSI
|
|
SetSysClockTo24MHSI();
|
|
#elif defined SYSCLK_FREQ_36MHz_HSI
|
|
SetSysClockTo36MHSI();
|
|
#elif defined SYSCLK_FREQ_48MHz_HSI
|
|
SetSysClockTo48MHSI();
|
|
#elif defined SYSCLK_FREQ_56MHz_HSI
|
|
SetSysClockTo56MHSI();
|
|
#elif defined SYSCLK_FREQ_72MHz_HSI
|
|
SetSysClockTo72MHSI();
|
|
#elif defined SYSCLK_FREQ_96MHz_HSI
|
|
SetSysClockTo96MHSI();
|
|
#elif defined SYSCLK_FREQ_108MHz_HSI
|
|
SetSysClockTo108MHSI();
|
|
#elif defined SYSCLK_FREQ_120MHz_HSI
|
|
SetSysClockTo120MHSI();
|
|
#elif defined SYSCLK_FREQ_144MHz_HSI
|
|
SetSysClockTo144MHSI();
|
|
#elif defined SYSCLK_FREQ_150MHz_HSI
|
|
SetSysClockTo150MHSI();
|
|
#elif defined SYSCLK_FREQ_168MHz_HSI
|
|
SetSysClockTo168MHSI();
|
|
#elif defined SYSCLK_FREQ_176MHz_HSI
|
|
SetSysClockTo176MHSI();
|
|
#elif defined SYSCLK_FREQ_192MHz_HSI
|
|
SetSysClockTo192MHSI();
|
|
#elif defined SYSCLK_FREQ_200MHz_HSI
|
|
SetSysClockTo200MHSI();
|
|
#elif defined SYSCLK_FREQ_224MHz_HSI
|
|
SetSysClockTo224MHSI();
|
|
#elif defined SYSCLK_FREQ_240MHz_HSI
|
|
SetSysClockTo240MHSI();
|
|
#endif
|
|
|
|
/* If none of the define above is enabled, the HSI is used as System clock
|
|
source (default after reset) */
|
|
}
|
|
|
|
/**
|
|
* @brief Setup the external memory controller. Called in startup_at32f4xx.s
|
|
* before jump to __main
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
#ifdef DATA_IN_ExtSRAM
|
|
/**
|
|
* @brief Setup the external memory controller.
|
|
* Called in startup_at32f4xx_xx.s/.c before jump to main.
|
|
* This function configures the external SRAM mounted
|
|
* (AT32 High density devices). This SRAM will be used as program
|
|
* data memory (including heap and stack).
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
void SystemInit_ExtMemCtrl(void)
|
|
{
|
|
/* Enable XMC clock */
|
|
RCC->AHBEN = RCC_AHBEN_SRAMEN | RCC_AHBEN_FLASHEN | RCC_AHBEN_XMCEN;
|
|
|
|
/* Enable GPIOD, GPIOE, GPIOF and GPIOG clocks */
|
|
RCC->APB2EN = RCC_APB2EN_GPIODEN | RCC_APB2EN_GPIOEEN | RCC_APB2EN_GPIOFEN | RCC_APB2EN_GPIOGEN;
|
|
|
|
/* --------------- SRAM Data lines, NOE and NWE configuration ---------------*/
|
|
/*---------------- SRAM Address lines configuration -------------------------*/
|
|
/*---------------- NOE and NWE configuration --------------------------------*/
|
|
/*---------------- NE3 configuration ----------------------------------------*/
|
|
/*---------------- NBL0, NBL1 configuration ---------------------------------*/
|
|
|
|
GPIOD->CTRLL = 0x44BB44BB;
|
|
GPIOD->CTRLH = 0xBBBBBBBB;
|
|
|
|
GPIOE->CTRLL = 0xB44444BB;
|
|
GPIOE->CTRLH = 0xBBBBBBBB;
|
|
|
|
GPIOF->CTRLL = 0x44BBBBBB;
|
|
GPIOF->CTRLH = 0xBBBB4444;
|
|
|
|
GPIOG->CTRLL = 0x44BBBBBB;
|
|
GPIOG->CTRLH = 0x44444B44;
|
|
|
|
/*---------------- XMC Configuration ---------------------------------------*/
|
|
/*---------------- Enable XMC Bank1_SRAM Bank ------------------------------*/
|
|
|
|
XMC_Bank1->BK1CTRLR[4] = 0x00001011;
|
|
XMC_Bank1->BK1CTRLR[5] = 0x00000200;
|
|
}
|
|
#endif /* DATA_IN_ExtSRAM */
|
|
|
|
#ifndef SYSCLK_FREQ_HSI
|
|
#ifdef AT32F403xx
|
|
/**
|
|
* @brief Delay to wait for HSE stable.
|
|
* @note This function should be used before reading the HSESTBL flag.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void WaitHseStbl(uint32_t delay)
|
|
{
|
|
uint32_t i;
|
|
|
|
for(i = 0; i < delay; i++)
|
|
;
|
|
}
|
|
#endif
|
|
#endif /* SYSCLK_FREQ_HSI */
|
|
|
|
#ifdef SYSCLK_FREQ_HSE
|
|
/**
|
|
* @brief Selects HSE as System clock source and configure HCLK, PCLK2
|
|
* and PCLK1 prescalers.
|
|
* @note This function should be used only after reset.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void SetSysClockToHSE(void)
|
|
{
|
|
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
|
|
|
|
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
|
|
/* Enable HSE */
|
|
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSEEN);
|
|
|
|
/* Wait till HSE is ready and if Time out is reached exit */
|
|
do
|
|
{
|
|
HSEStatus = RCC->CTRL & RCC_CTRL_HSESTBL;
|
|
StartUpCounter++;
|
|
}
|
|
while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
|
|
#ifdef AT32F403xx
|
|
WaitHseStbl(HSE_STABLE_DELAY);
|
|
#endif
|
|
if ((RCC->CTRL & RCC_CTRL_HSESTBL) != RESET)
|
|
{
|
|
HSEStatus = (uint32_t)0x01;
|
|
}
|
|
else
|
|
{
|
|
HSEStatus = (uint32_t)0x00;
|
|
}
|
|
|
|
if (HSEStatus == (uint32_t)0x01)
|
|
{
|
|
#if defined (AT32F415xx)
|
|
/* Enable Prefetch Buffer */
|
|
FLASH->ACR |= FLASH_ACR_PRFTBE;
|
|
|
|
/* Flash 1 wait state */
|
|
FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
|
|
FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0;
|
|
#endif
|
|
/* HCLK = SYSCLK */
|
|
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
|
|
|
|
/* PCLK2 = HCLK */
|
|
RCC->CFG &= 0xFFFFC7FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV1;
|
|
|
|
/* PCLK1 = HCLK */
|
|
RCC->CFG &= 0xFFFFF8FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV1;
|
|
|
|
/* Select HSE as system clock source */
|
|
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
|
|
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_HSE;
|
|
|
|
/* Wait till HSE is used as system clock source */
|
|
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != (uint32_t)0x04)
|
|
{
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/* If HSE fails to start-up, the application will have wrong clock
|
|
configuration. User can add here some code to deal with this error */
|
|
}
|
|
}
|
|
#elif defined SYSCLK_FREQ_24MHz
|
|
/**
|
|
* @brief Sets System clock frequency to 24MHz and configure HCLK, PCLK2
|
|
* and PCLK1 prescalers.
|
|
* @note This function should be used only after reset.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void SetSysClockTo24M(void)
|
|
{
|
|
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
|
|
|
|
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
|
|
/* Enable HSE */
|
|
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSEEN);
|
|
|
|
/* Wait till HSE is ready and if Time out is reached exit */
|
|
do
|
|
{
|
|
HSEStatus = RCC->CTRL & RCC_CTRL_HSESTBL;
|
|
StartUpCounter++;
|
|
}
|
|
while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
|
|
#ifdef AT32F403xx
|
|
WaitHseStbl(HSE_STABLE_DELAY);
|
|
#endif
|
|
if ((RCC->CTRL & RCC_CTRL_HSESTBL) != RESET)
|
|
{
|
|
HSEStatus = (uint32_t)0x01;
|
|
}
|
|
else
|
|
{
|
|
HSEStatus = (uint32_t)0x00;
|
|
}
|
|
|
|
if (HSEStatus == (uint32_t)0x01)
|
|
{
|
|
#if defined (AT32F415xx)
|
|
/* Enable Prefetch Buffer */
|
|
FLASH->ACR |= FLASH_ACR_PRFTBE;
|
|
|
|
/* Flash 1 wait state */
|
|
FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
|
|
FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0;
|
|
#endif
|
|
/* HCLK = SYSCLK */
|
|
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
|
|
|
|
/* PCLK2 = HCLK */
|
|
RCC->CFG &= 0xFFFFC7FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV1;
|
|
|
|
/* PCLK1 = HCLK */
|
|
RCC->CFG &= 0xFFFFF8FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV1;
|
|
|
|
/* PLL configuration: = (HSE / 2) * 6 = 24 MHz */
|
|
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
|
|
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSE | RCC_CFG_PLLHSEPSC_HSE_DIV2 | RCC_CFG_PLLMULT6);
|
|
|
|
/* Enable PLL */
|
|
RCC->CTRL |= RCC_CTRL_PLLEN;
|
|
|
|
/* Wait till PLL is ready */
|
|
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
|
|
{
|
|
}
|
|
|
|
/* Select PLL as system clock source */
|
|
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
|
|
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
|
|
|
|
/* Wait till PLL is used as system clock source */
|
|
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
|
|
{
|
|
}
|
|
#ifdef AT32F403xx
|
|
WaitHseStbl(PLL_STABLE_DELAY);
|
|
#endif
|
|
}
|
|
else
|
|
{
|
|
/* If HSE fails to start-up, the application will have wrong clock
|
|
configuration. User can add here some code to deal with this error */
|
|
}
|
|
}
|
|
#elif defined SYSCLK_FREQ_36MHz
|
|
/**
|
|
* @brief Sets System clock frequency to 36MHz and configure HCLK, PCLK2
|
|
* and PCLK1 prescalers.
|
|
* @note This function should be used only after reset.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void SetSysClockTo36M(void)
|
|
{
|
|
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
|
|
|
|
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
|
|
/* Enable HSE */
|
|
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSEEN);
|
|
|
|
/* Wait till HSE is ready and if Time out is reached exit */
|
|
do
|
|
{
|
|
HSEStatus = RCC->CTRL & RCC_CTRL_HSESTBL;
|
|
StartUpCounter++;
|
|
}
|
|
while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
|
|
#ifdef AT32F403xx
|
|
WaitHseStbl(HSE_STABLE_DELAY);
|
|
#endif
|
|
if ((RCC->CTRL & RCC_CTRL_HSESTBL) != RESET)
|
|
{
|
|
HSEStatus = (uint32_t)0x01;
|
|
}
|
|
else
|
|
{
|
|
HSEStatus = (uint32_t)0x00;
|
|
}
|
|
|
|
if (HSEStatus == (uint32_t)0x01)
|
|
{
|
|
#if defined (AT32F415xx)
|
|
/* Enable Prefetch Buffer */
|
|
FLASH->ACR |= FLASH_ACR_PRFTBE;
|
|
|
|
/* Flash 1 wait state */
|
|
FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
|
|
FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;
|
|
#endif
|
|
/* HCLK = SYSCLK */
|
|
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
|
|
|
|
/* PCLK2 = HCLK */
|
|
RCC->CFG &= 0xFFFFC7FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV1;
|
|
|
|
/* PCLK1 = HCLK */
|
|
RCC->CFG &= 0xFFFFF8FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV1;
|
|
|
|
/* PLL configuration: PLLCLK = (HSE / 2) * 9 = 36 MHz */
|
|
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
|
|
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSE | RCC_CFG_PLLHSEPSC_HSE_DIV2 | RCC_CFG_PLLMULT9);
|
|
|
|
/* Enable PLL */
|
|
RCC->CTRL |= RCC_CTRL_PLLEN;
|
|
|
|
/* Wait till PLL is ready */
|
|
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
|
|
{
|
|
}
|
|
|
|
/* Select PLL as system clock source */
|
|
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
|
|
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
|
|
|
|
/* Wait till PLL is used as system clock source */
|
|
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
|
|
{
|
|
}
|
|
#ifdef AT32F403xx
|
|
WaitHseStbl(PLL_STABLE_DELAY);
|
|
#endif
|
|
}
|
|
else
|
|
{
|
|
/* If HSE fails to start-up, the application will have wrong clock
|
|
configuration. User can add here some code to deal with this error */
|
|
}
|
|
}
|
|
#elif defined SYSCLK_FREQ_48MHz
|
|
/**
|
|
* @brief Sets System clock frequency to 48MHz and configure HCLK, PCLK2
|
|
* and PCLK1 prescalers.
|
|
* @note This function should be used only after reset.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void SetSysClockTo48M(void)
|
|
{
|
|
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
|
|
|
|
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
|
|
/* Enable HSE */
|
|
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSEEN);
|
|
|
|
/* Wait till HSE is ready and if Time out is reached exit */
|
|
do
|
|
{
|
|
HSEStatus = RCC->CTRL & RCC_CTRL_HSESTBL;
|
|
StartUpCounter++;
|
|
}
|
|
while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
|
|
#ifdef AT32F403xx
|
|
WaitHseStbl(HSE_STABLE_DELAY);
|
|
#endif
|
|
if ((RCC->CTRL & RCC_CTRL_HSESTBL) != RESET)
|
|
{
|
|
HSEStatus = (uint32_t)0x01;
|
|
}
|
|
else
|
|
{
|
|
HSEStatus = (uint32_t)0x00;
|
|
}
|
|
|
|
if (HSEStatus == (uint32_t)0x01)
|
|
{
|
|
#if defined (AT32F415xx)
|
|
/* Enable Prefetch Buffer */
|
|
FLASH->ACR |= FLASH_ACR_PRFTBE;
|
|
|
|
/* Flash 1 wait state */
|
|
FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
|
|
FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;
|
|
#endif
|
|
/* HCLK = SYSCLK */
|
|
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
|
|
|
|
/* PCLK2 = HCLK */
|
|
RCC->CFG &= 0xFFFFC7FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV1;
|
|
|
|
/* PCLK1 = HCLK/2 */
|
|
RCC->CFG &= 0xFFFFF8FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
|
|
|
|
/* PLL configuration: PLLCLK = HSE * 6 = 48 MHz */
|
|
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
|
|
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSE | RCC_CFG_PLLMULT6);
|
|
|
|
/* Enable PLL */
|
|
RCC->CTRL |= RCC_CTRL_PLLEN;
|
|
|
|
/* Wait till PLL is ready */
|
|
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
|
|
{
|
|
}
|
|
|
|
/* Select PLL as system clock source */
|
|
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
|
|
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
|
|
|
|
/* Wait till PLL is used as system clock source */
|
|
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
|
|
{
|
|
}
|
|
#ifdef AT32F403xx
|
|
WaitHseStbl(PLL_STABLE_DELAY);
|
|
#endif
|
|
}
|
|
else
|
|
{
|
|
/* If HSE fails to start-up, the application will have wrong clock
|
|
configuration. User can add here some code to deal with this error */
|
|
}
|
|
}
|
|
|
|
#elif defined SYSCLK_FREQ_56MHz
|
|
/**
|
|
* @brief Sets System clock frequency to 56MHz and configure HCLK, PCLK2
|
|
* and PCLK1 prescalers.
|
|
* @note This function should be used only after reset.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void SetSysClockTo56M(void)
|
|
{
|
|
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
|
|
|
|
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
|
|
/* Enable HSE */
|
|
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSEEN);
|
|
|
|
/* Wait till HSE is ready and if Time out is reached exit */
|
|
do
|
|
{
|
|
HSEStatus = RCC->CTRL & RCC_CTRL_HSESTBL;
|
|
StartUpCounter++;
|
|
}
|
|
while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
|
|
#ifdef AT32F403xx
|
|
WaitHseStbl(HSE_STABLE_DELAY);
|
|
#endif
|
|
if ((RCC->CTRL & RCC_CTRL_HSESTBL) != RESET)
|
|
{
|
|
HSEStatus = (uint32_t)0x01;
|
|
}
|
|
else
|
|
{
|
|
HSEStatus = (uint32_t)0x00;
|
|
}
|
|
|
|
if (HSEStatus == (uint32_t)0x01)
|
|
{
|
|
#if defined (AT32F415xx)
|
|
/* Enable Prefetch Buffer */
|
|
FLASH->ACR |= FLASH_ACR_PRFTBE;
|
|
|
|
/* Flash 1 wait state */
|
|
FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
|
|
FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;
|
|
#endif
|
|
/* HCLK = SYSCLK */
|
|
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
|
|
|
|
/* PCLK2 = HCLK */
|
|
RCC->CFG &= 0xFFFFC7FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV1;
|
|
|
|
/* PCLK1 = HCLK/2 */
|
|
RCC->CFG &= 0xFFFFF8FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
|
|
|
|
/* PLL configuration: PLLCLK = HSE * 7 = 56 MHz */
|
|
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
|
|
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSE | RCC_CFG_PLLMULT7);
|
|
|
|
/* Enable PLL */
|
|
RCC->CTRL |= RCC_CTRL_PLLEN;
|
|
|
|
/* Wait till PLL is ready */
|
|
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
|
|
{
|
|
}
|
|
|
|
/* Select PLL as system clock source */
|
|
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
|
|
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
|
|
|
|
/* Wait till PLL is used as system clock source */
|
|
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
|
|
{
|
|
}
|
|
#ifdef AT32F403xx
|
|
WaitHseStbl(PLL_STABLE_DELAY);
|
|
#endif
|
|
}
|
|
else
|
|
{
|
|
/* If HSE fails to start-up, the application will have wrong clock
|
|
configuration. User can add here some code to deal with this error */
|
|
}
|
|
}
|
|
|
|
#elif defined SYSCLK_FREQ_72MHz
|
|
/**
|
|
* @brief Sets System clock frequency to 72MHz and configure HCLK, PCLK2
|
|
* and PCLK1 prescalers.
|
|
* @note This function should be used only after reset.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void SetSysClockTo72M(void)
|
|
{
|
|
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
|
|
|
|
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
|
|
/* Enable HSE */
|
|
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSEEN);
|
|
|
|
/* Wait till HSE is ready and if Time out is reached exit */
|
|
do
|
|
{
|
|
HSEStatus = RCC->CTRL & RCC_CTRL_HSESTBL;
|
|
StartUpCounter++;
|
|
}
|
|
while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
|
|
#ifdef AT32F403xx
|
|
WaitHseStbl(HSE_STABLE_DELAY);
|
|
#endif
|
|
if ((RCC->CTRL & RCC_CTRL_HSESTBL) != RESET)
|
|
{
|
|
HSEStatus = (uint32_t)0x01;
|
|
}
|
|
else
|
|
{
|
|
HSEStatus = (uint32_t)0x00;
|
|
}
|
|
|
|
if (HSEStatus == (uint32_t)0x01)
|
|
{
|
|
#if defined (AT32F415xx)
|
|
/* Enable Prefetch Buffer */
|
|
FLASH->ACR |= FLASH_ACR_PRFTBE;
|
|
|
|
/* Flash 1 wait state */
|
|
FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
|
|
FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2;
|
|
#endif
|
|
/* HCLK = SYSCLK */
|
|
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
|
|
|
|
/* PCLK2 = HCLK */
|
|
RCC->CFG &= 0xFFFFC7FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV1;
|
|
|
|
/* PCLK1 = HCLK/2 */
|
|
RCC->CFG &= 0xFFFFF8FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
|
|
|
|
/* PLL configuration: PLLCLK = HSE * 9 = 72 MHz */
|
|
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
|
|
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSE | RCC_CFG_PLLMULT9);
|
|
|
|
/* Enable PLL */
|
|
RCC->CTRL |= RCC_CTRL_PLLEN;
|
|
|
|
/* Wait till PLL is ready */
|
|
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
|
|
{
|
|
}
|
|
|
|
/* Select PLL as system clock source */
|
|
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
|
|
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
|
|
|
|
/* Wait till PLL is used as system clock source */
|
|
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
|
|
{
|
|
}
|
|
#ifdef AT32F403xx
|
|
WaitHseStbl(PLL_STABLE_DELAY);
|
|
#endif
|
|
}
|
|
else
|
|
{
|
|
/* If HSE fails to start-up, the application will have wrong clock
|
|
configuration. User can add here some code to deal with this error */
|
|
}
|
|
}
|
|
|
|
#elif defined SYSCLK_FREQ_96MHz
|
|
/**
|
|
* @brief Sets System clock frequency to 96MHz and configure HCLK, PCLK2
|
|
* and PCLK1 prescalers.
|
|
* @note This function should be used only after reset.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void SetSysClockTo96M(void)
|
|
{
|
|
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
|
|
|
|
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
|
|
/* Enable HSE */
|
|
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSEEN);
|
|
|
|
/* Wait till HSE is ready and if Time out is reached exit */
|
|
do
|
|
{
|
|
HSEStatus = RCC->CTRL & RCC_CTRL_HSESTBL;
|
|
StartUpCounter++;
|
|
}
|
|
while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
|
|
#ifdef AT32F403xx
|
|
WaitHseStbl(HSE_STABLE_DELAY);
|
|
#endif
|
|
if ((RCC->CTRL & RCC_CTRL_HSESTBL) != RESET)
|
|
{
|
|
HSEStatus = (uint32_t)0x01;
|
|
}
|
|
else
|
|
{
|
|
HSEStatus = (uint32_t)0x00;
|
|
}
|
|
|
|
if (HSEStatus == (uint32_t)0x01)
|
|
{
|
|
#if defined (AT32F415xx)
|
|
/* Enable Prefetch Buffer */
|
|
FLASH->ACR |= FLASH_ACR_PRFTBE;
|
|
|
|
/* Flash 1 wait state */
|
|
FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
|
|
FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2;
|
|
#endif
|
|
/* HCLK = SYSCLK */
|
|
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
|
|
|
|
/* PCLK2 = HCLK/2 */
|
|
RCC->CFG &= 0xFFFFC7FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV2;
|
|
|
|
/* PCLK1 = HCLK/2 */
|
|
RCC->CFG &= 0xFFFFF8FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
|
|
|
|
/* PLL configuration: PLLCLK = HSE * 12 = 96 MHz */
|
|
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
|
|
#if defined (AT32F415xx)
|
|
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSE | RCC_CFG_PLLMULT12);
|
|
#else
|
|
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSE | RCC_CFG_PLLMULT12 | RCC_CFG_PLLRANGE_GT72MHZ);
|
|
#endif
|
|
|
|
/* Enable PLL */
|
|
RCC->CTRL |= RCC_CTRL_PLLEN;
|
|
|
|
/* Wait till PLL is ready */
|
|
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
|
|
{
|
|
}
|
|
|
|
/* Select PLL as system clock source */
|
|
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
|
|
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
|
|
|
|
/* Wait till PLL is used as system clock source */
|
|
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
|
|
{
|
|
}
|
|
#ifdef AT32F403xx
|
|
WaitHseStbl(PLL_STABLE_DELAY);
|
|
#endif
|
|
}
|
|
else
|
|
{
|
|
/* If HSE fails to start-up, the application will have wrong clock
|
|
configuration. User can add here some code to deal with this error */
|
|
}
|
|
}
|
|
|
|
#elif defined SYSCLK_FREQ_108MHz
|
|
/**
|
|
* @brief Sets System clock frequency to 108MHz and configure HCLK, PCLK2
|
|
* and PCLK1 prescalers.
|
|
* @note This function should be used only after reset.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void SetSysClockTo108M(void)
|
|
{
|
|
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
|
|
|
|
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
|
|
/* Enable HSE */
|
|
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSEEN);
|
|
|
|
/* Wait till HSE is ready and if Time out is reached exit */
|
|
do
|
|
{
|
|
HSEStatus = RCC->CTRL & RCC_CTRL_HSESTBL;
|
|
StartUpCounter++;
|
|
}
|
|
while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
|
|
#ifdef AT32F403xx
|
|
WaitHseStbl(HSE_STABLE_DELAY);
|
|
#endif
|
|
if ((RCC->CTRL & RCC_CTRL_HSESTBL) != RESET)
|
|
{
|
|
HSEStatus = (uint32_t)0x01;
|
|
}
|
|
else
|
|
{
|
|
HSEStatus = (uint32_t)0x00;
|
|
}
|
|
|
|
if (HSEStatus == (uint32_t)0x01)
|
|
{
|
|
#if defined (AT32F415xx)
|
|
/* Enable Prefetch Buffer */
|
|
FLASH->ACR |= FLASH_ACR_PRFTBE;
|
|
|
|
/* Flash 1 wait state */
|
|
FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
|
|
FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_3;
|
|
#endif
|
|
/* HCLK = SYSCLK */
|
|
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
|
|
|
|
/* PCLK2 = HCLK/2 */
|
|
RCC->CFG &= 0xFFFFC7FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV2;
|
|
|
|
/* PCLK1 = HCLK/2 */
|
|
RCC->CFG &= 0xFFFFF8FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
|
|
|
|
/* PLL configuration: PLLCLK = (HSE/2) * 27 = 108 MHz */
|
|
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
|
|
|
|
#if defined (AT32F415xx)
|
|
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSE | RCC_CFG_PLLHSEPSC_HSE_DIV2 | RCC_CFG_PLLMULT27);
|
|
#else
|
|
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSE | RCC_CFG_PLLHSEPSC_HSE_DIV2 | RCC_CFG_PLLMULT27 \
|
|
| RCC_CFG_PLLRANGE_GT72MHZ);
|
|
#endif
|
|
/* Enable PLL */
|
|
RCC->CTRL |= RCC_CTRL_PLLEN;
|
|
|
|
/* Wait till PLL is ready */
|
|
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
|
|
{
|
|
}
|
|
|
|
/* Select PLL as system clock source */
|
|
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
|
|
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
|
|
|
|
/* Wait till PLL is used as system clock source */
|
|
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
|
|
{
|
|
}
|
|
#ifdef AT32F403xx
|
|
WaitHseStbl(PLL_STABLE_DELAY);
|
|
#endif
|
|
}
|
|
else
|
|
{
|
|
/* If HSE fails to start-up, the application will have wrong clock
|
|
configuration. User can add here some code to deal with this error */
|
|
}
|
|
}
|
|
|
|
#elif defined SYSCLK_FREQ_120MHz
|
|
/**
|
|
* @brief Sets System clock frequency to 120MHz and configure HCLK, PCLK2
|
|
* and PCLK1 prescalers.
|
|
* @note This function should be used only after reset.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void SetSysClockTo120M(void)
|
|
{
|
|
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
|
|
|
|
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
|
|
/* Enable HSE */
|
|
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSEEN);
|
|
|
|
/* Wait till HSE is ready and if Time out is reached exit */
|
|
do
|
|
{
|
|
HSEStatus = RCC->CTRL & RCC_CTRL_HSESTBL;
|
|
StartUpCounter++;
|
|
}
|
|
while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
|
|
#ifdef AT32F403xx
|
|
WaitHseStbl(HSE_STABLE_DELAY);
|
|
#endif
|
|
if ((RCC->CTRL & RCC_CTRL_HSESTBL) != RESET)
|
|
{
|
|
HSEStatus = (uint32_t)0x01;
|
|
}
|
|
else
|
|
{
|
|
HSEStatus = (uint32_t)0x00;
|
|
}
|
|
|
|
if (HSEStatus == (uint32_t)0x01)
|
|
{
|
|
#if defined (AT32F415xx)
|
|
/* Enable Prefetch Buffer */
|
|
FLASH->ACR |= FLASH_ACR_PRFTBE;
|
|
|
|
/* Flash 1 wait state */
|
|
FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
|
|
FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_3;
|
|
#endif
|
|
/* HCLK = SYSCLK */
|
|
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
|
|
|
|
/* PCLK2 = HCLK/2 */
|
|
RCC->CFG &= 0xFFFFC7FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV2;
|
|
|
|
/* PCLK1 = HCLK/2 */
|
|
RCC->CFG &= 0xFFFFF8FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
|
|
|
|
/* PLL configuration: PLLCLK = HSE * 15 = 120 MHz */
|
|
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
|
|
|
|
#if defined (AT32F415xx)
|
|
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSE | RCC_CFG_PLLMULT15);
|
|
#else
|
|
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSE | RCC_CFG_PLLMULT15 | RCC_CFG_PLLRANGE_GT72MHZ);
|
|
#endif
|
|
|
|
/* Enable PLL */
|
|
RCC->CTRL |= RCC_CTRL_PLLEN;
|
|
|
|
/* Wait till PLL is ready */
|
|
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
|
|
{
|
|
}
|
|
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
|
|
defined (AT32F407xx) || defined (AT32F415xx)
|
|
RCC_StepModeCmd(ENABLE);
|
|
#endif
|
|
/* Select PLL as system clock source */
|
|
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
|
|
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
|
|
|
|
/* Wait till PLL is used as system clock source */
|
|
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
|
|
{
|
|
}
|
|
#ifdef AT32F403xx
|
|
WaitHseStbl(PLL_STABLE_DELAY);
|
|
#endif
|
|
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
|
|
defined (AT32F407xx) || defined (AT32F415xx)
|
|
RCC_StepModeCmd(DISABLE);
|
|
#endif
|
|
}
|
|
else
|
|
{
|
|
/* If HSE fails to start-up, the application will have wrong clock
|
|
configuration. User can add here some code to deal with this error */
|
|
}
|
|
}
|
|
|
|
#elif defined SYSCLK_FREQ_144MHz
|
|
/**
|
|
* @brief Sets System clock frequency to 144MHz and configure HCLK, PCLK2
|
|
* and PCLK1 prescalers.
|
|
* @note This function should be used only after reset.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void SetSysClockTo144M(void)
|
|
{
|
|
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
|
|
|
|
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
|
|
/* Enable HSE */
|
|
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSEEN);
|
|
|
|
/* Wait till HSE is ready and if Time out is reached exit */
|
|
do
|
|
{
|
|
HSEStatus = RCC->CTRL & RCC_CTRL_HSESTBL;
|
|
StartUpCounter++;
|
|
}
|
|
while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
|
|
#ifdef AT32F403xx
|
|
WaitHseStbl(HSE_STABLE_DELAY);
|
|
#endif
|
|
if ((RCC->CTRL & RCC_CTRL_HSESTBL) != RESET)
|
|
{
|
|
HSEStatus = (uint32_t)0x01;
|
|
}
|
|
else
|
|
{
|
|
HSEStatus = (uint32_t)0x00;
|
|
}
|
|
|
|
if (HSEStatus == (uint32_t)0x01)
|
|
{
|
|
#if defined (AT32F415xx)
|
|
/* Enable Prefetch Buffer */
|
|
FLASH->ACR |= FLASH_ACR_PRFTBE;
|
|
|
|
/* Flash 1 wait state */
|
|
FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
|
|
FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_4;
|
|
#endif
|
|
/* HCLK = SYSCLK */
|
|
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
|
|
|
|
/* PCLK2 = HCLK/2 */
|
|
RCC->CFG &= 0xFFFFC7FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV2;
|
|
|
|
/* PCLK1 = HCLK/2 */
|
|
RCC->CFG &= 0xFFFFF8FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
|
|
|
|
/* PLL configuration: PLLCLK = HSE * 18 = 144 MHz */
|
|
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
|
|
|
|
#if defined (AT32F415xx)
|
|
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSE | RCC_CFG_PLLMULT18);
|
|
#else
|
|
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSE | RCC_CFG_PLLMULT18 | RCC_CFG_PLLRANGE_GT72MHZ);
|
|
#endif
|
|
|
|
/* Enable PLL */
|
|
RCC->CTRL |= RCC_CTRL_PLLEN;
|
|
|
|
/* Wait till PLL is ready */
|
|
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
|
|
{
|
|
}
|
|
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
|
|
defined (AT32F407xx) || defined (AT32F415xx)
|
|
RCC_StepModeCmd(ENABLE);
|
|
#endif
|
|
/* Select PLL as system clock source */
|
|
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
|
|
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
|
|
|
|
/* Wait till PLL is used as system clock source */
|
|
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
|
|
{
|
|
}
|
|
#ifdef AT32F403xx
|
|
WaitHseStbl(PLL_STABLE_DELAY);
|
|
#endif
|
|
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
|
|
defined (AT32F407xx) || defined (AT32F415xx)
|
|
RCC_StepModeCmd(DISABLE);
|
|
#endif
|
|
}
|
|
else
|
|
{
|
|
/* If HSE fails to start-up, the application will have wrong clock
|
|
configuration. User can add here some code to deal with this error */
|
|
}
|
|
}
|
|
|
|
#elif defined SYSCLK_FREQ_150MHz
|
|
/**
|
|
* @brief Sets System clock frequency to 150MHz and configure HCLK, PCLK2
|
|
* and PCLK1 prescalers.
|
|
* @note This function should be used only after reset.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void SetSysClockTo150M(void)
|
|
{
|
|
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
|
|
|
|
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
|
|
/* Enable HSE */
|
|
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSEEN);
|
|
|
|
/* Wait till HSE is ready and if Time out is reached exit */
|
|
do
|
|
{
|
|
HSEStatus = RCC->CTRL & RCC_CTRL_HSESTBL;
|
|
StartUpCounter++;
|
|
}
|
|
while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
|
|
#ifdef AT32F403xx
|
|
WaitHseStbl(HSE_STABLE_DELAY);
|
|
#endif
|
|
if ((RCC->CTRL & RCC_CTRL_HSESTBL) != RESET)
|
|
{
|
|
HSEStatus = (uint32_t)0x01;
|
|
}
|
|
else
|
|
{
|
|
HSEStatus = (uint32_t)0x00;
|
|
}
|
|
|
|
if (HSEStatus == (uint32_t)0x01)
|
|
{
|
|
#if defined (AT32F415xx)
|
|
/* Enable Prefetch Buffer */
|
|
FLASH->ACR |= FLASH_ACR_PRFTBE;
|
|
|
|
/* Flash 1 wait state */
|
|
FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
|
|
FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_4;
|
|
#endif
|
|
/* HCLK = SYSCLK */
|
|
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
|
|
|
|
/* PCLK2 = HCLK/2 */
|
|
RCC->CFG &= 0xFFFFC7FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV2;
|
|
|
|
/* PCLK1 = HCLK/2 */
|
|
RCC->CFG &= 0xFFFFF8FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
|
|
|
|
/* PLL configuration: PLLCLK = (HSE * 75) / (1 * 4) = 150 MHz */
|
|
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
|
|
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSE);
|
|
RCC_PLLconfig2(PLL_FREF_8M, 75, 1, PLL_FR_4);
|
|
|
|
/* Enable PLL */
|
|
RCC->CTRL |= RCC_CTRL_PLLEN;
|
|
|
|
/* Wait till PLL is ready */
|
|
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
|
|
{
|
|
}
|
|
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
|
|
defined (AT32F407xx) || defined (AT32F415xx)
|
|
RCC_StepModeCmd(ENABLE);
|
|
#endif
|
|
/* Select PLL as system clock source */
|
|
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
|
|
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
|
|
|
|
/* Wait till PLL is used as system clock source */
|
|
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
|
|
{
|
|
}
|
|
#ifdef AT32F403xx
|
|
WaitHseStbl(PLL_STABLE_DELAY);
|
|
#endif
|
|
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
|
|
defined (AT32F407xx) || defined (AT32F415xx)
|
|
RCC_StepModeCmd(DISABLE);
|
|
#endif
|
|
}
|
|
else
|
|
{
|
|
/* If HSE fails to start-up, the application will have wrong clock
|
|
configuration. User can add here some code to deal with this error */
|
|
}
|
|
}
|
|
|
|
#elif defined SYSCLK_FREQ_168MHz
|
|
/**
|
|
* @brief Sets System clock frequency to 168MHz and configure HCLK, PCLK2
|
|
* and PCLK1 prescalers.
|
|
* @note This function should be used only after reset.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void SetSysClockTo168M(void)
|
|
{
|
|
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
|
|
|
|
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
|
|
/* Enable HSE */
|
|
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSEEN);
|
|
|
|
/* Wait till HSE is ready and if Time out is reached exit */
|
|
do
|
|
{
|
|
HSEStatus = RCC->CTRL & RCC_CTRL_HSESTBL;
|
|
StartUpCounter++;
|
|
}
|
|
while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
|
|
#ifdef AT32F403xx
|
|
WaitHseStbl(HSE_STABLE_DELAY);
|
|
#endif
|
|
if ((RCC->CTRL & RCC_CTRL_HSESTBL) != RESET)
|
|
{
|
|
HSEStatus = (uint32_t)0x01;
|
|
}
|
|
else
|
|
{
|
|
HSEStatus = (uint32_t)0x00;
|
|
}
|
|
|
|
if (HSEStatus == (uint32_t)0x01)
|
|
{
|
|
/* HCLK = SYSCLK */
|
|
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
|
|
|
|
/* PCLK2 = HCLK/2 */
|
|
RCC->CFG &= 0xFFFFC7FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV2;
|
|
|
|
/* PCLK1 = HCLK/2 */
|
|
RCC->CFG &= 0xFFFFF8FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
|
|
|
|
/* PLL configuration: PLLCLK = HSE * 21 = 168 MHz */
|
|
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
|
|
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSE | RCC_CFG_PLLMULT21 | RCC_CFG_PLLRANGE_GT72MHZ);
|
|
|
|
/* Enable PLL */
|
|
RCC->CTRL |= RCC_CTRL_PLLEN;
|
|
|
|
/* Wait till PLL is ready */
|
|
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
|
|
{
|
|
}
|
|
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
|
|
defined (AT32F407xx)
|
|
RCC_StepModeCmd(ENABLE);
|
|
#endif
|
|
/* Select PLL as system clock source */
|
|
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
|
|
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
|
|
|
|
/* Wait till PLL is used as system clock source */
|
|
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
|
|
{
|
|
}
|
|
#ifdef AT32F403xx
|
|
WaitHseStbl(PLL_STABLE_DELAY);
|
|
#endif
|
|
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
|
|
defined (AT32F407xx)
|
|
RCC_StepModeCmd(DISABLE);
|
|
#endif
|
|
}
|
|
else
|
|
{
|
|
/* If HSE fails to start-up, the application will have wrong clock
|
|
configuration. User can add here some code to deal with this error */
|
|
}
|
|
}
|
|
|
|
#elif defined SYSCLK_FREQ_176MHz
|
|
/**
|
|
* @brief Sets System clock frequency to 176MHz and configure HCLK, PCLK2
|
|
* and PCLK1 prescalers.
|
|
* @note This function should be used only after reset.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void SetSysClockTo176M(void)
|
|
{
|
|
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
|
|
|
|
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
|
|
/* Enable HSE */
|
|
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSEEN);
|
|
|
|
/* Wait till HSE is ready and if Time out is reached exit */
|
|
do
|
|
{
|
|
HSEStatus = RCC->CTRL & RCC_CTRL_HSESTBL;
|
|
StartUpCounter++;
|
|
}
|
|
while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
|
|
#ifdef AT32F403xx
|
|
WaitHseStbl(HSE_STABLE_DELAY);
|
|
#endif
|
|
if ((RCC->CTRL & RCC_CTRL_HSESTBL) != RESET)
|
|
{
|
|
HSEStatus = (uint32_t)0x01;
|
|
}
|
|
else
|
|
{
|
|
HSEStatus = (uint32_t)0x00;
|
|
}
|
|
|
|
if (HSEStatus == (uint32_t)0x01)
|
|
{
|
|
/* HCLK = SYSCLK */
|
|
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
|
|
|
|
/* PCLK2 = HCLK/2 */
|
|
RCC->CFG &= 0xFFFFC7FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV2;
|
|
|
|
/* PCLK1 = HCLK/2 */
|
|
RCC->CFG &= 0xFFFFF8FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
|
|
|
|
/* PLL configuration: PLLCLK = HSE * 22 = 176 MHz */
|
|
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
|
|
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSE | RCC_CFG_PLLMULT22 | RCC_CFG_PLLRANGE_GT72MHZ);
|
|
|
|
/* Enable PLL */
|
|
RCC->CTRL |= RCC_CTRL_PLLEN;
|
|
|
|
/* Wait till PLL is ready */
|
|
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
|
|
{
|
|
}
|
|
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
|
|
defined (AT32F407xx)
|
|
RCC_StepModeCmd(ENABLE);
|
|
#endif
|
|
/* Select PLL as system clock source */
|
|
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
|
|
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
|
|
|
|
/* Wait till PLL is used as system clock source */
|
|
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
|
|
{
|
|
}
|
|
#ifdef AT32F403xx
|
|
WaitHseStbl(PLL_STABLE_DELAY);
|
|
#endif
|
|
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
|
|
defined (AT32F407xx)
|
|
RCC_StepModeCmd(DISABLE);
|
|
#endif
|
|
}
|
|
else
|
|
{
|
|
/* If HSE fails to start-up, the application will have wrong clock
|
|
configuration. User can add here some code to deal with this error */
|
|
}
|
|
}
|
|
|
|
#elif defined SYSCLK_FREQ_192MHz
|
|
/**
|
|
* @brief Sets System clock frequency to 192MHz and configure HCLK, PCLK2
|
|
* and PCLK1 prescalers.
|
|
* @note This function should be used only after reset.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void SetSysClockTo192M(void)
|
|
{
|
|
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
|
|
|
|
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
|
|
/* Enable HSE */
|
|
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSEEN);
|
|
|
|
/* Wait till HSE is ready and if Time out is reached exit */
|
|
do
|
|
{
|
|
HSEStatus = RCC->CTRL & RCC_CTRL_HSESTBL;
|
|
StartUpCounter++;
|
|
}
|
|
while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
|
|
#ifdef AT32F403xx
|
|
WaitHseStbl(HSE_STABLE_DELAY);
|
|
#endif
|
|
if ((RCC->CTRL & RCC_CTRL_HSESTBL) != RESET)
|
|
{
|
|
HSEStatus = (uint32_t)0x01;
|
|
}
|
|
else
|
|
{
|
|
HSEStatus = (uint32_t)0x00;
|
|
}
|
|
|
|
if (HSEStatus == (uint32_t)0x01)
|
|
{
|
|
/* HCLK = SYSCLK */
|
|
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
|
|
|
|
/* PCLK2 = HCLK/2 */
|
|
RCC->CFG &= 0xFFFFC7FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV2;
|
|
|
|
/* PCLK1 = HCLK/2 */
|
|
RCC->CFG &= 0xFFFFF8FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
|
|
|
|
/* PLL configuration: PLLCLK = HSE * 24 = 192 MHz */
|
|
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
|
|
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSE | RCC_CFG_PLLMULT24 | RCC_CFG_PLLRANGE_GT72MHZ);
|
|
|
|
/* Enable PLL */
|
|
RCC->CTRL |= RCC_CTRL_PLLEN;
|
|
|
|
/* Wait till PLL is ready */
|
|
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
|
|
{
|
|
}
|
|
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
|
|
defined (AT32F407xx)
|
|
RCC_StepModeCmd(ENABLE);
|
|
#endif
|
|
/* Select PLL as system clock source */
|
|
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
|
|
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
|
|
|
|
/* Wait till PLL is used as system clock source */
|
|
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
|
|
{
|
|
}
|
|
#ifdef AT32F403xx
|
|
WaitHseStbl(PLL_STABLE_DELAY);
|
|
#endif
|
|
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
|
|
defined (AT32F407xx)
|
|
RCC_StepModeCmd(DISABLE);
|
|
#endif
|
|
}
|
|
else
|
|
{
|
|
/* If HSE fails to start-up, the application will have wrong clock
|
|
configuration. User can add here some code to deal with this error */
|
|
}
|
|
}
|
|
|
|
#elif defined SYSCLK_FREQ_200MHz
|
|
/**
|
|
* @brief Sets System clock frequency to 200MHz and configure HCLK, PCLK2
|
|
* and PCLK1 prescalers.
|
|
* @note This function should be used only after reset.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void SetSysClockTo200M(void)
|
|
{
|
|
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
|
|
|
|
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
|
|
/* Enable HSE */
|
|
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSEEN);
|
|
|
|
/* Wait till HSE is ready and if Time out is reached exit */
|
|
do
|
|
{
|
|
HSEStatus = RCC->CTRL & RCC_CTRL_HSESTBL;
|
|
StartUpCounter++;
|
|
}
|
|
while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
|
|
#ifdef AT32F403xx
|
|
WaitHseStbl(HSE_STABLE_DELAY);
|
|
#endif
|
|
if ((RCC->CTRL & RCC_CTRL_HSESTBL) != RESET)
|
|
{
|
|
HSEStatus = (uint32_t)0x01;
|
|
}
|
|
else
|
|
{
|
|
HSEStatus = (uint32_t)0x00;
|
|
}
|
|
|
|
if (HSEStatus == (uint32_t)0x01)
|
|
{
|
|
/* HCLK = SYSCLK */
|
|
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
|
|
|
|
/* PCLK2 = HCLK/2 */
|
|
RCC->CFG &= 0xFFFFC7FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV2;
|
|
|
|
/* PCLK1 = HCLK/2 */
|
|
RCC->CFG &= 0xFFFFF8FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
|
|
|
|
/* PLL configuration: PLLCLK = HSE * 25 = 200 MHz */
|
|
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
|
|
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSE | RCC_CFG_PLLMULT25 | RCC_CFG_PLLRANGE_GT72MHZ);
|
|
|
|
/* Enable PLL */
|
|
RCC->CTRL |= RCC_CTRL_PLLEN;
|
|
|
|
/* Wait till PLL is ready */
|
|
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
|
|
{
|
|
}
|
|
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
|
|
defined (AT32F407xx)
|
|
RCC_StepModeCmd(ENABLE);
|
|
#endif
|
|
/* Select PLL as system clock source */
|
|
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
|
|
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
|
|
|
|
/* Wait till PLL is used as system clock source */
|
|
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
|
|
{
|
|
}
|
|
#ifdef AT32F403xx
|
|
WaitHseStbl(PLL_STABLE_DELAY);
|
|
#endif
|
|
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
|
|
defined (AT32F407xx)
|
|
RCC_StepModeCmd(DISABLE);
|
|
#endif
|
|
}
|
|
else
|
|
{
|
|
/* If HSE fails to start-up, the application will have wrong clock
|
|
configuration. User can add here some code to deal with this error */
|
|
}
|
|
}
|
|
|
|
#elif defined SYSCLK_FREQ_224MHz
|
|
/**
|
|
* @brief Sets System clock frequency to 224MHz and configure HCLK, PCLK2
|
|
* and PCLK1 prescalers.
|
|
* @note This function should be used only after reset.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void SetSysClockTo224M(void)
|
|
{
|
|
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
|
|
|
|
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
|
|
/* Enable HSE */
|
|
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSEEN);
|
|
|
|
/* Wait till HSE is ready and if Time out is reached exit */
|
|
do
|
|
{
|
|
HSEStatus = RCC->CTRL & RCC_CTRL_HSESTBL;
|
|
StartUpCounter++;
|
|
}
|
|
while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
|
|
#ifdef AT32F403xx
|
|
WaitHseStbl(HSE_STABLE_DELAY);
|
|
#endif
|
|
if ((RCC->CTRL & RCC_CTRL_HSESTBL) != RESET)
|
|
{
|
|
HSEStatus = (uint32_t)0x01;
|
|
}
|
|
else
|
|
{
|
|
HSEStatus = (uint32_t)0x00;
|
|
}
|
|
|
|
if (HSEStatus == (uint32_t)0x01)
|
|
{
|
|
/* HCLK = SYSCLK */
|
|
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
|
|
|
|
/* PCLK2 = HCLK/2 */
|
|
RCC->CFG &= 0xFFFFC7FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV2;
|
|
|
|
/* PCLK1 = HCLK/2 */
|
|
RCC->CFG &= 0xFFFFF8FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
|
|
|
|
/* PLL configuration: PLLCLK = HSE * 28 = 224 MHz */
|
|
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
|
|
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSE | RCC_CFG_PLLMULT28 | RCC_CFG_PLLRANGE_GT72MHZ);
|
|
|
|
/* Enable PLL */
|
|
RCC->CTRL |= RCC_CTRL_PLLEN;
|
|
|
|
/* Wait till PLL is ready */
|
|
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
|
|
{
|
|
}
|
|
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
|
|
defined (AT32F407xx)
|
|
RCC_StepModeCmd(ENABLE);
|
|
#endif
|
|
/* Select PLL as system clock source */
|
|
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
|
|
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
|
|
|
|
/* Wait till PLL is used as system clock source */
|
|
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
|
|
{
|
|
}
|
|
#ifdef AT32F403xx
|
|
WaitHseStbl(PLL_STABLE_DELAY);
|
|
#endif
|
|
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
|
|
defined (AT32F407xx)
|
|
RCC_StepModeCmd(DISABLE);
|
|
#endif
|
|
}
|
|
else
|
|
{
|
|
/* If HSE fails to start-up, the application will have wrong clock
|
|
configuration. User can add here some code to deal with this error */
|
|
}
|
|
}
|
|
|
|
#elif defined SYSCLK_FREQ_240MHz
|
|
/**
|
|
* @brief Sets System clock frequency to 240MHz and configure HCLK, PCLK2
|
|
* and PCLK1 prescalers.
|
|
* @note This function should be used only after reset.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void SetSysClockTo240M(void)
|
|
{
|
|
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
|
|
|
|
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
|
|
/* Enable HSE */
|
|
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSEEN);
|
|
|
|
/* Wait till HSE is ready and if Time out is reached exit */
|
|
do
|
|
{
|
|
HSEStatus = RCC->CTRL & RCC_CTRL_HSESTBL;
|
|
StartUpCounter++;
|
|
}
|
|
while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
|
|
#ifdef AT32F403xx
|
|
WaitHseStbl(HSE_STABLE_DELAY);
|
|
#endif
|
|
if ((RCC->CTRL & RCC_CTRL_HSESTBL) != RESET)
|
|
{
|
|
HSEStatus = (uint32_t)0x01;
|
|
}
|
|
else
|
|
{
|
|
HSEStatus = (uint32_t)0x00;
|
|
}
|
|
|
|
if (HSEStatus == (uint32_t)0x01)
|
|
{
|
|
/* HCLK = SYSCLK */
|
|
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
|
|
|
|
/* PCLK2 = HCLK/2 */
|
|
RCC->CFG &= 0xFFFFC7FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV2;
|
|
|
|
/* PCLK1 = HCLK/2 */
|
|
RCC->CFG &= 0xFFFFF8FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
|
|
|
|
/* PLL configuration: PLLCLK = HSE * 30 = 240 MHz */
|
|
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
|
|
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSE | RCC_CFG_PLLMULT30 | RCC_CFG_PLLRANGE_GT72MHZ);
|
|
|
|
/* Enable PLL */
|
|
RCC->CTRL |= RCC_CTRL_PLLEN;
|
|
|
|
/* Wait till PLL is ready */
|
|
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
|
|
{
|
|
}
|
|
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
|
|
defined (AT32F407xx)
|
|
RCC_StepModeCmd(ENABLE);
|
|
#endif
|
|
/* Select PLL as system clock source */
|
|
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
|
|
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
|
|
|
|
/* Wait till PLL is used as system clock source */
|
|
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
|
|
{
|
|
}
|
|
#ifdef AT32F403xx
|
|
WaitHseStbl(PLL_STABLE_DELAY);
|
|
#endif
|
|
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
|
|
defined (AT32F407xx)
|
|
RCC_StepModeCmd(DISABLE);
|
|
#endif
|
|
}
|
|
else
|
|
{
|
|
/* If HSE fails to start-up, the application will have wrong clock
|
|
configuration. User can add here some code to deal with this error */
|
|
}
|
|
}
|
|
|
|
#elif defined SYSCLK_FREQ_24MHz_HSI
|
|
/**
|
|
* @brief Sets System clock frequency to 24MHz from HSI and configure HCLK, PCLK2
|
|
* and PCLK1 prescalers.
|
|
* @note This function should be used only after reset.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void SetSysClockTo24MHSI(void)
|
|
{
|
|
__IO uint32_t StartUpCounter = 0, HSIStatus = 0;
|
|
|
|
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
|
|
/* Enable HSI */
|
|
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSIEN);
|
|
|
|
/* Wait till HSI is ready and if Time out is reached exit */
|
|
do
|
|
{
|
|
HSIStatus = RCC->CTRL & RCC_CTRL_HSISTBL;
|
|
StartUpCounter++;
|
|
}
|
|
while((HSIStatus == 0) && (StartUpCounter != 0xFFFF));
|
|
|
|
if ((RCC->CTRL & RCC_CTRL_HSISTBL) != RESET)
|
|
{
|
|
HSIStatus = (uint32_t)0x01;
|
|
}
|
|
else
|
|
{
|
|
HSIStatus = (uint32_t)0x00;
|
|
}
|
|
|
|
if (HSIStatus == (uint32_t)0x01)
|
|
{
|
|
#if defined (AT32F415xx)
|
|
/* Enable Prefetch Buffer */
|
|
FLASH->ACR |= FLASH_ACR_PRFTBE;
|
|
|
|
/* Flash 1 wait state */
|
|
FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
|
|
FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0;
|
|
#endif
|
|
/* HCLK = SYSCLK */
|
|
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
|
|
|
|
/* PCLK2 = HCLK */
|
|
RCC->CFG &= 0xFFFFC7FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV1;
|
|
|
|
/* PCLK1 = HCLK */
|
|
RCC->CFG &= 0xFFFFF8FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV1;
|
|
|
|
/* PLL configuration: PLLCLK = (HSI/2) * 6 = 24 MHz */
|
|
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
|
|
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSI_DIV2 | RCC_CFG_PLLMULT6);
|
|
|
|
/* Enable PLL */
|
|
RCC->CTRL |= RCC_CTRL_PLLEN;
|
|
|
|
/* Wait till PLL is ready */
|
|
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
|
|
{
|
|
}
|
|
|
|
/* Select PLL as system clock source */
|
|
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
|
|
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
|
|
|
|
/* Wait till PLL is used as system clock source */
|
|
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
|
|
{
|
|
}
|
|
#ifdef AT32F403xx
|
|
WaitHseStbl(PLL_STABLE_DELAY);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
#elif defined SYSCLK_FREQ_36MHz_HSI
|
|
/**
|
|
* @brief Sets System clock frequency to 36MHz from HSI and configure HCLK, PCLK2
|
|
* and PCLK1 prescalers.
|
|
* @note This function should be used only after reset.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void SetSysClockTo36MHSI(void)
|
|
{
|
|
__IO uint32_t StartUpCounter = 0, HSIStatus = 0;
|
|
|
|
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
|
|
/* Enable HSI */
|
|
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSIEN);
|
|
|
|
/* Wait till HSI is ready and if Time out is reached exit */
|
|
do
|
|
{
|
|
HSIStatus = RCC->CTRL & RCC_CTRL_HSISTBL;
|
|
StartUpCounter++;
|
|
}
|
|
while((HSIStatus == 0) && (StartUpCounter != 0xFFFF));
|
|
|
|
if ((RCC->CTRL & RCC_CTRL_HSISTBL) != RESET)
|
|
{
|
|
HSIStatus = (uint32_t)0x01;
|
|
}
|
|
else
|
|
{
|
|
HSIStatus = (uint32_t)0x00;
|
|
}
|
|
|
|
if (HSIStatus == (uint32_t)0x01)
|
|
{
|
|
#if defined (AT32F415xx)
|
|
/* Enable Prefetch Buffer */
|
|
FLASH->ACR |= FLASH_ACR_PRFTBE;
|
|
|
|
/* Flash 1 wait state */
|
|
FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
|
|
FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;
|
|
#endif
|
|
/* HCLK = SYSCLK */
|
|
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
|
|
|
|
/* PCLK2 = HCLK */
|
|
RCC->CFG &= 0xFFFFC7FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV1;
|
|
|
|
/* PCLK1 = HCLK */
|
|
RCC->CFG &= 0xFFFFF8FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV1;
|
|
|
|
/* PLL configuration: PLLCLK = (HSI/2) * 9 = 36 MHz */
|
|
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
|
|
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSI_DIV2 | RCC_CFG_PLLMULT9);
|
|
|
|
/* Enable PLL */
|
|
RCC->CTRL |= RCC_CTRL_PLLEN;
|
|
|
|
/* Wait till PLL is ready */
|
|
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
|
|
{
|
|
}
|
|
|
|
/* Select PLL as system clock source */
|
|
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
|
|
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
|
|
|
|
/* Wait till PLL is used as system clock source */
|
|
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
|
|
{
|
|
}
|
|
#ifdef AT32F403xx
|
|
WaitHseStbl(PLL_STABLE_DELAY);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
#elif defined SYSCLK_FREQ_48MHz_HSI
|
|
/**
|
|
* @brief Sets System clock frequency to 48MHz from HSI and configure HCLK, PCLK2
|
|
* and PCLK1 prescalers.
|
|
* @note This function should be used only after reset.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void SetSysClockTo48MHSI(void)
|
|
{
|
|
__IO uint32_t StartUpCounter = 0, HSIStatus = 0;
|
|
|
|
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
|
|
/* Enable HSI */
|
|
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSIEN);
|
|
|
|
/* Wait till HSI is ready and if Time out is reached exit */
|
|
do
|
|
{
|
|
HSIStatus = RCC->CTRL & RCC_CTRL_HSISTBL;
|
|
StartUpCounter++;
|
|
}
|
|
while((HSIStatus == 0) && (StartUpCounter != 0xFFFF));
|
|
|
|
if ((RCC->CTRL & RCC_CTRL_HSISTBL) != RESET)
|
|
{
|
|
HSIStatus = (uint32_t)0x01;
|
|
}
|
|
else
|
|
{
|
|
HSIStatus = (uint32_t)0x00;
|
|
}
|
|
|
|
if (HSIStatus == (uint32_t)0x01)
|
|
{
|
|
#if defined (AT32F415xx)
|
|
/* Enable Prefetch Buffer */
|
|
FLASH->ACR |= FLASH_ACR_PRFTBE;
|
|
|
|
/* Flash 1 wait state */
|
|
FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
|
|
FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;
|
|
#endif
|
|
/* HCLK = SYSCLK */
|
|
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
|
|
|
|
/* PCLK2 = HCLK */
|
|
RCC->CFG &= 0xFFFFC7FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV1;
|
|
|
|
/* PCLK1 = HCLK/2 */
|
|
RCC->CFG &= 0xFFFFF8FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
|
|
|
|
/* PLL configuration: PLLCLK = (HSI/2) * 12 = 48 MHz */
|
|
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
|
|
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSI_DIV2 | RCC_CFG_PLLMULT12);
|
|
|
|
/* Enable PLL */
|
|
RCC->CTRL |= RCC_CTRL_PLLEN;
|
|
|
|
/* Wait till PLL is ready */
|
|
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
|
|
{
|
|
}
|
|
|
|
/* Select PLL as system clock source */
|
|
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
|
|
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
|
|
|
|
/* Wait till PLL is used as system clock source */
|
|
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
|
|
{
|
|
}
|
|
#ifdef AT32F403xx
|
|
WaitHseStbl(PLL_STABLE_DELAY);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
#elif defined SYSCLK_FREQ_56MHz_HSI
|
|
/**
|
|
* @brief Sets System clock frequency to 56MHz from HSI and configure HCLK, PCLK2
|
|
* and PCLK1 prescalers.
|
|
* @note This function should be used only after reset.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void SetSysClockTo56MHSI(void)
|
|
{
|
|
__IO uint32_t StartUpCounter = 0, HSIStatus = 0;
|
|
|
|
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
|
|
/* Enable HSI */
|
|
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSIEN);
|
|
|
|
/* Wait till HSI is ready and if Time out is reached exit */
|
|
do
|
|
{
|
|
HSIStatus = RCC->CTRL & RCC_CTRL_HSISTBL;
|
|
StartUpCounter++;
|
|
}
|
|
while((HSIStatus == 0) && (StartUpCounter != 0xFFFF));
|
|
|
|
if ((RCC->CTRL & RCC_CTRL_HSISTBL) != RESET)
|
|
{
|
|
HSIStatus = (uint32_t)0x01;
|
|
}
|
|
else
|
|
{
|
|
HSIStatus = (uint32_t)0x00;
|
|
}
|
|
|
|
if (HSIStatus == (uint32_t)0x01)
|
|
{
|
|
#if defined (AT32F415xx)
|
|
/* Enable Prefetch Buffer */
|
|
FLASH->ACR |= FLASH_ACR_PRFTBE;
|
|
|
|
/* Flash 1 wait state */
|
|
FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
|
|
FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;
|
|
#endif
|
|
/* HCLK = SYSCLK */
|
|
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
|
|
|
|
/* PCLK2 = HCLK */
|
|
RCC->CFG &= 0xFFFFC7FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV1;
|
|
|
|
/* PCLK1 = HCLK/2 */
|
|
RCC->CFG &= 0xFFFFF8FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
|
|
|
|
/* PLL configuration: PLLCLK = (HSI/2) * 14 = 56 MHz */
|
|
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
|
|
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSI_DIV2 | RCC_CFG_PLLMULT14);
|
|
|
|
/* Enable PLL */
|
|
RCC->CTRL |= RCC_CTRL_PLLEN;
|
|
|
|
/* Wait till PLL is ready */
|
|
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
|
|
{
|
|
}
|
|
|
|
/* Select PLL as system clock source */
|
|
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
|
|
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
|
|
|
|
/* Wait till PLL is used as system clock source */
|
|
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
|
|
{
|
|
}
|
|
#ifdef AT32F403xx
|
|
WaitHseStbl(PLL_STABLE_DELAY);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
#elif defined SYSCLK_FREQ_72MHz_HSI
|
|
/**
|
|
* @brief Sets System clock frequency to 72MHz from HSI and configure HCLK, PCLK2
|
|
* and PCLK1 prescalers.
|
|
* @note This function should be used only after reset.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void SetSysClockTo72MHSI(void)
|
|
{
|
|
__IO uint32_t StartUpCounter = 0, HSIStatus = 0;
|
|
|
|
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
|
|
/* Enable HSI */
|
|
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSIEN);
|
|
|
|
/* Wait till HSI is ready and if Time out is reached exit */
|
|
do
|
|
{
|
|
HSIStatus = RCC->CTRL & RCC_CTRL_HSISTBL;
|
|
StartUpCounter++;
|
|
}
|
|
while((HSIStatus == 0) && (StartUpCounter != 0xFFFF));
|
|
|
|
if ((RCC->CTRL & RCC_CTRL_HSISTBL) != RESET)
|
|
{
|
|
HSIStatus = (uint32_t)0x01;
|
|
}
|
|
else
|
|
{
|
|
HSIStatus = (uint32_t)0x00;
|
|
}
|
|
|
|
if (HSIStatus == (uint32_t)0x01)
|
|
{
|
|
#if defined (AT32F415xx)
|
|
/* Enable Prefetch Buffer */
|
|
FLASH->ACR |= FLASH_ACR_PRFTBE;
|
|
|
|
/* Flash 1 wait state */
|
|
FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
|
|
FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2;
|
|
#endif
|
|
/* HCLK = SYSCLK */
|
|
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
|
|
|
|
/* PCLK2 = HCLK */
|
|
RCC->CFG &= 0xFFFFC7FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV1;
|
|
|
|
/* PCLK1 = HCLK/2 */
|
|
RCC->CFG &= 0xFFFFF8FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
|
|
|
|
/* PLL configuration: PLLCLK = (HSI/2) * 18 = 72 MHz */
|
|
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
|
|
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSI_DIV2 | RCC_CFG_PLLMULT18);
|
|
|
|
/* Enable PLL */
|
|
RCC->CTRL |= RCC_CTRL_PLLEN;
|
|
|
|
/* Wait till PLL is ready */
|
|
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
|
|
{
|
|
}
|
|
|
|
/* Select PLL as system clock source */
|
|
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
|
|
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
|
|
|
|
/* Wait till PLL is used as system clock source */
|
|
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
|
|
{
|
|
}
|
|
#ifdef AT32F403xx
|
|
WaitHseStbl(PLL_STABLE_DELAY);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
#elif defined SYSCLK_FREQ_96MHz_HSI
|
|
/**
|
|
* @brief Sets System clock frequency to 96MHz from HSI and configure HCLK, PCLK2
|
|
* and PCLK1 prescalers.
|
|
* @note This function should be used only after reset.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void SetSysClockTo96MHSI(void)
|
|
{
|
|
__IO uint32_t StartUpCounter = 0, HSIStatus = 0;
|
|
|
|
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
|
|
/* Enable HSI */
|
|
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSIEN);
|
|
|
|
/* Wait till HSI is ready and if Time out is reached exit */
|
|
do
|
|
{
|
|
HSIStatus = RCC->CTRL & RCC_CTRL_HSISTBL;
|
|
StartUpCounter++;
|
|
}
|
|
while((HSIStatus == 0) && (StartUpCounter != 0xFFFF));
|
|
|
|
if ((RCC->CTRL & RCC_CTRL_HSISTBL) != RESET)
|
|
{
|
|
HSIStatus = (uint32_t)0x01;
|
|
}
|
|
else
|
|
{
|
|
HSIStatus = (uint32_t)0x00;
|
|
}
|
|
|
|
if (HSIStatus == (uint32_t)0x01)
|
|
{
|
|
#if defined (AT32F415xx)
|
|
/* Enable Prefetch Buffer */
|
|
FLASH->ACR |= FLASH_ACR_PRFTBE;
|
|
|
|
/* Flash 1 wait state */
|
|
FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
|
|
FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2;
|
|
#endif
|
|
/* HCLK = SYSCLK */
|
|
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
|
|
|
|
/* PCLK2 = HCLK/2 */
|
|
RCC->CFG &= 0xFFFFC7FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV2;
|
|
|
|
/* PCLK1 = HCLK/2 */
|
|
RCC->CFG &= 0xFFFFF8FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
|
|
|
|
/* PLL configuration: PLLCLK = (HSI/2) * 24 = 96 MHz */
|
|
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
|
|
|
|
#if defined (AT32F415xx)
|
|
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSI_DIV2 | RCC_CFG_PLLMULT24);
|
|
#else
|
|
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSI_DIV2 | RCC_CFG_PLLMULT24 | RCC_CFG_PLLRANGE_GT72MHZ);
|
|
#endif
|
|
|
|
/* Enable PLL */
|
|
RCC->CTRL |= RCC_CTRL_PLLEN;
|
|
|
|
/* Wait till PLL is ready */
|
|
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
|
|
{
|
|
}
|
|
|
|
/* Select PLL as system clock source */
|
|
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
|
|
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
|
|
|
|
/* Wait till PLL is used as system clock source */
|
|
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
|
|
{
|
|
}
|
|
#ifdef AT32F403xx
|
|
WaitHseStbl(PLL_STABLE_DELAY);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
#elif defined SYSCLK_FREQ_108MHz_HSI
|
|
/**
|
|
* @brief Sets System clock frequency to 108MHz from HSI and configure HCLK, PCLK2
|
|
* and PCLK1 prescalers.
|
|
* @note This function should be used only after reset.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void SetSysClockTo108MHSI(void)
|
|
{
|
|
__IO uint32_t StartUpCounter = 0, HSIStatus = 0;
|
|
|
|
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
|
|
/* Enable HSI */
|
|
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSIEN);
|
|
|
|
/* Wait till HSI is ready and if Time out is reached exit */
|
|
do
|
|
{
|
|
HSIStatus = RCC->CTRL & RCC_CTRL_HSISTBL;
|
|
StartUpCounter++;
|
|
}
|
|
while((HSIStatus == 0) && (StartUpCounter != 0xFFFF));
|
|
|
|
if ((RCC->CTRL & RCC_CTRL_HSISTBL) != RESET)
|
|
{
|
|
HSIStatus = (uint32_t)0x01;
|
|
}
|
|
else
|
|
{
|
|
HSIStatus = (uint32_t)0x00;
|
|
}
|
|
|
|
if (HSIStatus == (uint32_t)0x01)
|
|
{
|
|
#if defined (AT32F415xx)
|
|
/* Enable Prefetch Buffer */
|
|
FLASH->ACR |= FLASH_ACR_PRFTBE;
|
|
|
|
/* Flash 1 wait state */
|
|
FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
|
|
FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_3;
|
|
#endif
|
|
/* HCLK = SYSCLK */
|
|
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
|
|
|
|
/* PCLK2 = HCLK/2 */
|
|
RCC->CFG &= 0xFFFFC7FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV2;
|
|
|
|
/* PCLK1 = HCLK/2 */
|
|
RCC->CFG &= 0xFFFFF8FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
|
|
|
|
/* PLL configuration: PLLCLK = (HSI/2) * 27 = 108 MHz */
|
|
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
|
|
|
|
#if defined (AT32F415xx)
|
|
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSI_DIV2 | RCC_CFG_PLLMULT27);
|
|
#else
|
|
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSI_DIV2 | RCC_CFG_PLLMULT27 | RCC_CFG_PLLRANGE_GT72MHZ);
|
|
#endif
|
|
|
|
/* Enable PLL */
|
|
RCC->CTRL |= RCC_CTRL_PLLEN;
|
|
|
|
/* Wait till PLL is ready */
|
|
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
|
|
{
|
|
}
|
|
|
|
/* Select PLL as system clock source */
|
|
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
|
|
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
|
|
|
|
/* Wait till PLL is used as system clock source */
|
|
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
|
|
{
|
|
}
|
|
#ifdef AT32F403xx
|
|
WaitHseStbl(PLL_STABLE_DELAY);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
#elif defined SYSCLK_FREQ_120MHz_HSI
|
|
/**
|
|
* @brief Sets System clock frequency to 120MHz from HSI and configure HCLK, PCLK2
|
|
* and PCLK1 prescalers.
|
|
* @note This function should be used only after reset.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void SetSysClockTo120MHSI(void)
|
|
{
|
|
__IO uint32_t StartUpCounter = 0, HSIStatus = 0;
|
|
|
|
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
|
|
/* Enable HSI */
|
|
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSIEN);
|
|
|
|
/* Wait till HSI is ready and if Time out is reached exit */
|
|
do
|
|
{
|
|
HSIStatus = RCC->CTRL & RCC_CTRL_HSISTBL;
|
|
StartUpCounter++;
|
|
}
|
|
while((HSIStatus == 0) && (StartUpCounter != 0xFFFF));
|
|
|
|
if ((RCC->CTRL & RCC_CTRL_HSISTBL) != RESET)
|
|
{
|
|
HSIStatus = (uint32_t)0x01;
|
|
}
|
|
else
|
|
{
|
|
HSIStatus = (uint32_t)0x00;
|
|
}
|
|
|
|
if (HSIStatus == (uint32_t)0x01)
|
|
{
|
|
#if defined (AT32F415xx)
|
|
/* Enable Prefetch Buffer */
|
|
FLASH->ACR |= FLASH_ACR_PRFTBE;
|
|
|
|
/* Flash 1 wait state */
|
|
FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
|
|
FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_3;
|
|
#endif
|
|
/* HCLK = SYSCLK */
|
|
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
|
|
|
|
/* PCLK2 = HCLK/2 */
|
|
RCC->CFG &= 0xFFFFC7FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV2;
|
|
|
|
/* PCLK1 = HCLK/2 */
|
|
RCC->CFG &= 0xFFFFF8FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
|
|
|
|
/* PLL configuration: PLLCLK = (HSI/2) * 30 = 120 MHz */
|
|
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
|
|
|
|
#if defined (AT32F415xx)
|
|
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSI_DIV2 | RCC_CFG_PLLMULT30);
|
|
#else
|
|
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSI_DIV2 | RCC_CFG_PLLMULT30 | RCC_CFG_PLLRANGE_GT72MHZ);
|
|
#endif
|
|
|
|
/* Enable PLL */
|
|
RCC->CTRL |= RCC_CTRL_PLLEN;
|
|
|
|
/* Wait till PLL is ready */
|
|
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
|
|
{
|
|
}
|
|
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
|
|
defined (AT32F407xx) || defined (AT32F415xx)
|
|
RCC_StepModeCmd(ENABLE);
|
|
#endif
|
|
/* Select PLL as system clock source */
|
|
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
|
|
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
|
|
|
|
/* Wait till PLL is used as system clock source */
|
|
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
|
|
{
|
|
}
|
|
#ifdef AT32F403xx
|
|
WaitHseStbl(PLL_STABLE_DELAY);
|
|
#endif
|
|
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
|
|
defined (AT32F407xx) || defined (AT32F415xx)
|
|
RCC_StepModeCmd(DISABLE);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
#elif defined SYSCLK_FREQ_144MHz_HSI
|
|
/**
|
|
* @brief Sets System clock frequency to 144MHz from HSI and configure HCLK, PCLK2
|
|
* and PCLK1 prescalers.
|
|
* @note This function should be used only after reset.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void SetSysClockTo144MHSI(void)
|
|
{
|
|
__IO uint32_t StartUpCounter = 0, HSIStatus = 0;
|
|
|
|
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
|
|
/* Enable HSI */
|
|
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSIEN);
|
|
|
|
/* Wait till HSI is ready and if Time out is reached exit */
|
|
do
|
|
{
|
|
HSIStatus = RCC->CTRL & RCC_CTRL_HSISTBL;
|
|
StartUpCounter++;
|
|
}
|
|
while((HSIStatus == 0) && (StartUpCounter != 0xFFFF));
|
|
|
|
if ((RCC->CTRL & RCC_CTRL_HSISTBL) != RESET)
|
|
{
|
|
HSIStatus = (uint32_t)0x01;
|
|
}
|
|
else
|
|
{
|
|
HSIStatus = (uint32_t)0x00;
|
|
}
|
|
|
|
if (HSIStatus == (uint32_t)0x01)
|
|
{
|
|
#if defined (AT32F415xx)
|
|
/* Enable Prefetch Buffer */
|
|
FLASH->ACR |= FLASH_ACR_PRFTBE;
|
|
|
|
/* Flash 1 wait state */
|
|
FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
|
|
FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_4;
|
|
#endif
|
|
/* HCLK = SYSCLK */
|
|
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
|
|
|
|
/* PCLK2 = HCLK/2 */
|
|
RCC->CFG &= 0xFFFFC7FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV2;
|
|
|
|
/* PCLK1 = HCLK/2 */
|
|
RCC->CFG &= 0xFFFFF8FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
|
|
|
|
/* PLL configuration: PLLCLK = (HSI/2) * 36 = 144 MHz */
|
|
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
|
|
|
|
#if defined (AT32F415xx)
|
|
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSI_DIV2 | RCC_CFG_PLLMULT36);
|
|
#else
|
|
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSI_DIV2 | RCC_CFG_PLLMULT36 | RCC_CFG_PLLRANGE_GT72MHZ);
|
|
#endif
|
|
|
|
/* Enable PLL */
|
|
RCC->CTRL |= RCC_CTRL_PLLEN;
|
|
|
|
/* Wait till PLL is ready */
|
|
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
|
|
{
|
|
}
|
|
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
|
|
defined (AT32F407xx) || defined (AT32F415xx)
|
|
RCC_StepModeCmd(ENABLE);
|
|
#endif
|
|
/* Select PLL as system clock source */
|
|
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
|
|
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
|
|
|
|
/* Wait till PLL is used as system clock source */
|
|
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
|
|
{
|
|
}
|
|
#ifdef AT32F403xx
|
|
WaitHseStbl(PLL_STABLE_DELAY);
|
|
#endif
|
|
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
|
|
defined (AT32F407xx) || defined (AT32F415xx)
|
|
RCC_StepModeCmd(DISABLE);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
#elif defined SYSCLK_FREQ_150MHz_HSI
|
|
/**
|
|
* @brief Sets System clock frequency to 150MHz from HSI and configure HCLK, PCLK2
|
|
* and PCLK1 prescalers.
|
|
* @note This function should be used only after reset.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void SetSysClockTo150MHSI(void)
|
|
{
|
|
__IO uint32_t StartUpCounter = 0, HSIStatus = 0;
|
|
|
|
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
|
|
/* Enable HSI */
|
|
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSIEN);
|
|
|
|
/* Wait till HSI is ready and if Time out is reached exit */
|
|
do
|
|
{
|
|
HSIStatus = RCC->CTRL & RCC_CTRL_HSISTBL;
|
|
StartUpCounter++;
|
|
}
|
|
while((HSIStatus == 0) && (StartUpCounter != 0xFFFF));
|
|
|
|
if ((RCC->CTRL & RCC_CTRL_HSISTBL) != RESET)
|
|
{
|
|
HSIStatus = (uint32_t)0x01;
|
|
}
|
|
else
|
|
{
|
|
HSIStatus = (uint32_t)0x00;
|
|
}
|
|
|
|
if (HSIStatus == (uint32_t)0x01)
|
|
{
|
|
#if defined (AT32F415xx)
|
|
/* Enable Prefetch Buffer */
|
|
FLASH->ACR |= FLASH_ACR_PRFTBE;
|
|
|
|
/* Flash 1 wait state */
|
|
FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
|
|
FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_4;
|
|
#endif
|
|
/* HCLK = SYSCLK */
|
|
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
|
|
|
|
/* PCLK2 = HCLK/2 */
|
|
RCC->CFG &= 0xFFFFC7FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV2;
|
|
|
|
/* PCLK1 = HCLK/2 */
|
|
RCC->CFG &= 0xFFFFF8FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
|
|
|
|
/* PLL configuration: PLLCLK = ((HSI/2) * 150) / (1 * 4) = 150 MHz */
|
|
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
|
|
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSI_DIV2);
|
|
RCC_PLLconfig2(PLL_FREF_4M, 150, 1, PLL_FR_4);
|
|
|
|
/* Enable PLL */
|
|
RCC->CTRL |= RCC_CTRL_PLLEN;
|
|
|
|
/* Wait till PLL is ready */
|
|
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
|
|
{
|
|
}
|
|
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
|
|
defined (AT32F407xx) || defined (AT32F415xx)
|
|
RCC_StepModeCmd(ENABLE);
|
|
#endif
|
|
/* Select PLL as system clock source */
|
|
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
|
|
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
|
|
|
|
/* Wait till PLL is used as system clock source */
|
|
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
|
|
{
|
|
}
|
|
#ifdef AT32F403xx
|
|
WaitHseStbl(PLL_STABLE_DELAY);
|
|
#endif
|
|
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
|
|
defined (AT32F407xx) || defined (AT32F415xx)
|
|
RCC_StepModeCmd(DISABLE);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
#elif defined SYSCLK_FREQ_168MHz_HSI
|
|
/**
|
|
* @brief Sets System clock frequency to 168MHz from HSI and configure HCLK, PCLK2
|
|
* and PCLK1 prescalers.
|
|
* @note This function should be used only after reset.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void SetSysClockTo168MHSI(void)
|
|
{
|
|
__IO uint32_t StartUpCounter = 0, HSIStatus = 0;
|
|
|
|
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
|
|
/* Enable HSI */
|
|
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSIEN);
|
|
|
|
/* Wait till HSI is ready and if Time out is reached exit */
|
|
do
|
|
{
|
|
HSIStatus = RCC->CTRL & RCC_CTRL_HSISTBL;
|
|
StartUpCounter++;
|
|
}
|
|
while((HSIStatus == 0) && (StartUpCounter != 0xFFFF));
|
|
|
|
if ((RCC->CTRL & RCC_CTRL_HSISTBL) != RESET)
|
|
{
|
|
HSIStatus = (uint32_t)0x01;
|
|
}
|
|
else
|
|
{
|
|
HSIStatus = (uint32_t)0x00;
|
|
}
|
|
|
|
if (HSIStatus == (uint32_t)0x01)
|
|
{
|
|
/* HCLK = SYSCLK */
|
|
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
|
|
|
|
/* PCLK2 = HCLK/2 */
|
|
RCC->CFG &= 0xFFFFC7FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV2;
|
|
|
|
/* PCLK1 = HCLK/2 */
|
|
RCC->CFG &= 0xFFFFF8FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
|
|
|
|
/* PLL configuration: PLLCLK = (HSI/2) * 42 = 168 MHz */
|
|
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
|
|
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSI_DIV2 | RCC_CFG_PLLMULT42 | RCC_CFG_PLLRANGE_GT72MHZ);
|
|
|
|
/* Enable PLL */
|
|
RCC->CTRL |= RCC_CTRL_PLLEN;
|
|
|
|
/* Wait till PLL is ready */
|
|
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
|
|
{
|
|
}
|
|
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
|
|
defined (AT32F407xx)
|
|
RCC_StepModeCmd(ENABLE);
|
|
#endif
|
|
/* Select PLL as system clock source */
|
|
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
|
|
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
|
|
|
|
/* Wait till PLL is used as system clock source */
|
|
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
|
|
{
|
|
}
|
|
#ifdef AT32F403xx
|
|
WaitHseStbl(PLL_STABLE_DELAY);
|
|
#endif
|
|
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
|
|
defined (AT32F407xx)
|
|
RCC_StepModeCmd(DISABLE);
|
|
#endif
|
|
}
|
|
}
|
|
#elif defined SYSCLK_FREQ_176MHz_HSI
|
|
/**
|
|
* @brief Sets System clock frequency to 176MHz from HSI and configure HCLK, PCLK2
|
|
* and PCLK1 prescalers.
|
|
* @note This function should be used only after reset.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void SetSysClockTo176MHSI(void)
|
|
{
|
|
__IO uint32_t StartUpCounter = 0, HSIStatus = 0;
|
|
|
|
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
|
|
/* Enable HSI */
|
|
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSIEN);
|
|
|
|
/* Wait till HSI is ready and if Time out is reached exit */
|
|
do
|
|
{
|
|
HSIStatus = RCC->CTRL & RCC_CTRL_HSISTBL;
|
|
StartUpCounter++;
|
|
}
|
|
while((HSIStatus == 0) && (StartUpCounter != 0xFFFF));
|
|
|
|
if ((RCC->CTRL & RCC_CTRL_HSISTBL) != RESET)
|
|
{
|
|
HSIStatus = (uint32_t)0x01;
|
|
}
|
|
else
|
|
{
|
|
HSIStatus = (uint32_t)0x00;
|
|
}
|
|
|
|
if (HSIStatus == (uint32_t)0x01)
|
|
{
|
|
/* HCLK = SYSCLK */
|
|
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
|
|
|
|
/* PCLK2 = HCLK/2 */
|
|
RCC->CFG &= 0xFFFFC7FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV2;
|
|
|
|
/* PCLK1 = HCLK/2 */
|
|
RCC->CFG &= 0xFFFFF8FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
|
|
|
|
/* PLL configuration: PLLCLK = (HSI/2) * 44 = 176 MHz */
|
|
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
|
|
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSI_DIV2 | RCC_CFG_PLLMULT44 | RCC_CFG_PLLRANGE_GT72MHZ);
|
|
|
|
/* Enable PLL */
|
|
RCC->CTRL |= RCC_CTRL_PLLEN;
|
|
|
|
/* Wait till PLL is ready */
|
|
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
|
|
{
|
|
}
|
|
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
|
|
defined (AT32F407xx)
|
|
RCC_StepModeCmd(ENABLE);
|
|
#endif
|
|
/* Select PLL as system clock source */
|
|
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
|
|
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
|
|
|
|
/* Wait till PLL is used as system clock source */
|
|
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
|
|
{
|
|
}
|
|
#ifdef AT32F403xx
|
|
WaitHseStbl(PLL_STABLE_DELAY);
|
|
#endif
|
|
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
|
|
defined (AT32F407xx)
|
|
RCC_StepModeCmd(DISABLE);
|
|
#endif
|
|
}
|
|
}
|
|
#elif defined SYSCLK_FREQ_192MHz_HSI
|
|
/**
|
|
* @brief Sets System clock frequency to 192MHz from HSI and configure HCLK, PCLK2
|
|
* and PCLK1 prescalers.
|
|
* @note This function should be used only after reset.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void SetSysClockTo192MHSI(void)
|
|
{
|
|
__IO uint32_t StartUpCounter = 0, HSIStatus = 0;
|
|
|
|
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
|
|
/* Enable HSI */
|
|
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSIEN);
|
|
|
|
/* Wait till HSI is ready and if Time out is reached exit */
|
|
do
|
|
{
|
|
HSIStatus = RCC->CTRL & RCC_CTRL_HSISTBL;
|
|
StartUpCounter++;
|
|
}
|
|
while((HSIStatus == 0) && (StartUpCounter != 0xFFFF));
|
|
|
|
if ((RCC->CTRL & RCC_CTRL_HSISTBL) != RESET)
|
|
{
|
|
HSIStatus = (uint32_t)0x01;
|
|
}
|
|
else
|
|
{
|
|
HSIStatus = (uint32_t)0x00;
|
|
}
|
|
|
|
if (HSIStatus == (uint32_t)0x01)
|
|
{
|
|
/* HCLK = SYSCLK */
|
|
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
|
|
|
|
/* PCLK2 = HCLK/2 */
|
|
RCC->CFG &= 0xFFFFC7FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV2;
|
|
|
|
/* PCLK1 = HCLK/2 */
|
|
RCC->CFG &= 0xFFFFF8FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
|
|
|
|
/* PLL configuration: PLLCLK = (HSI/2) * 48 = 192 MHz */
|
|
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
|
|
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSI_DIV2 | RCC_CFG_PLLMULT48 | RCC_CFG_PLLRANGE_GT72MHZ);
|
|
|
|
/* Enable PLL */
|
|
RCC->CTRL |= RCC_CTRL_PLLEN;
|
|
|
|
/* Wait till PLL is ready */
|
|
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
|
|
{
|
|
}
|
|
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
|
|
defined (AT32F407xx)
|
|
RCC_StepModeCmd(ENABLE);
|
|
#endif
|
|
/* Select PLL as system clock source */
|
|
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
|
|
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
|
|
|
|
/* Wait till PLL is used as system clock source */
|
|
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
|
|
{
|
|
}
|
|
#ifdef AT32F403xx
|
|
WaitHseStbl(PLL_STABLE_DELAY);
|
|
#endif
|
|
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
|
|
defined (AT32F407xx)
|
|
RCC_StepModeCmd(DISABLE);
|
|
#endif
|
|
}
|
|
}
|
|
#elif defined SYSCLK_FREQ_200MHz_HSI
|
|
/**
|
|
* @brief Sets System clock frequency to 200MHz from HSI and configure HCLK, PCLK2
|
|
* and PCLK1 prescalers.
|
|
* @note This function should be used only after reset.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void SetSysClockTo200MHSI(void)
|
|
{
|
|
__IO uint32_t StartUpCounter = 0, HSIStatus = 0;
|
|
|
|
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
|
|
/* Enable HSI */
|
|
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSIEN);
|
|
|
|
/* Wait till HSI is ready and if Time out is reached exit */
|
|
do
|
|
{
|
|
HSIStatus = RCC->CTRL & RCC_CTRL_HSISTBL;
|
|
StartUpCounter++;
|
|
}
|
|
while((HSIStatus == 0) && (StartUpCounter != 0xFFFF));
|
|
|
|
if ((RCC->CTRL & RCC_CTRL_HSISTBL) != RESET)
|
|
{
|
|
HSIStatus = (uint32_t)0x01;
|
|
}
|
|
else
|
|
{
|
|
HSIStatus = (uint32_t)0x00;
|
|
}
|
|
|
|
if (HSIStatus == (uint32_t)0x01)
|
|
{
|
|
/* HCLK = SYSCLK */
|
|
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
|
|
|
|
/* PCLK2 = HCLK/2 */
|
|
RCC->CFG &= 0xFFFFC7FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV2;
|
|
|
|
/* PCLK1 = HCLK/2 */
|
|
RCC->CFG &= 0xFFFFF8FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
|
|
|
|
/* PLL configuration: PLLCLK = (HSI/2) * 50 = 200 MHz */
|
|
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
|
|
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSI_DIV2 | RCC_CFG_PLLMULT50 | RCC_CFG_PLLRANGE_GT72MHZ);
|
|
|
|
/* Enable PLL */
|
|
RCC->CTRL |= RCC_CTRL_PLLEN;
|
|
|
|
/* Wait till PLL is ready */
|
|
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
|
|
{
|
|
}
|
|
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
|
|
defined (AT32F407xx)
|
|
RCC_StepModeCmd(ENABLE);
|
|
#endif
|
|
/* Select PLL as system clock source */
|
|
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
|
|
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
|
|
|
|
/* Wait till PLL is used as system clock source */
|
|
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
|
|
{
|
|
}
|
|
#ifdef AT32F403xx
|
|
WaitHseStbl(PLL_STABLE_DELAY);
|
|
#endif
|
|
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
|
|
defined (AT32F407xx)
|
|
RCC_StepModeCmd(DISABLE);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
#elif defined SYSCLK_FREQ_224MHz_HSI
|
|
/**
|
|
* @brief Sets System clock frequency to 224MHz from HSI and configure HCLK, PCLK2
|
|
* and PCLK1 prescalers.
|
|
* @note This function should be used only after reset.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void SetSysClockTo224MHSI(void)
|
|
{
|
|
__IO uint32_t StartUpCounter = 0, HSIStatus = 0;
|
|
|
|
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
|
|
/* Enable HSI */
|
|
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSIEN);
|
|
|
|
/* Wait till HSI is ready and if Time out is reached exit */
|
|
do
|
|
{
|
|
HSIStatus = RCC->CTRL & RCC_CTRL_HSISTBL;
|
|
StartUpCounter++;
|
|
}
|
|
while((HSIStatus == 0) && (StartUpCounter != 0xFFFF));
|
|
|
|
if ((RCC->CTRL & RCC_CTRL_HSISTBL) != RESET)
|
|
{
|
|
HSIStatus = (uint32_t)0x01;
|
|
}
|
|
else
|
|
{
|
|
HSIStatus = (uint32_t)0x00;
|
|
}
|
|
|
|
if (HSIStatus == (uint32_t)0x01)
|
|
{
|
|
/* HCLK = SYSCLK */
|
|
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
|
|
|
|
/* PCLK2 = HCLK/2 */
|
|
RCC->CFG &= 0xFFFFC7FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV2;
|
|
|
|
/* PCLK1 = HCLK/2 */
|
|
RCC->CFG &= 0xFFFFF8FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
|
|
|
|
/* PLL configuration: PLLCLK = (HSI/2) * 56 = 224 MHz */
|
|
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
|
|
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSI_DIV2 | RCC_CFG_PLLMULT56 | RCC_CFG_PLLRANGE_GT72MHZ);
|
|
|
|
/* Enable PLL */
|
|
RCC->CTRL |= RCC_CTRL_PLLEN;
|
|
|
|
/* Wait till PLL is ready */
|
|
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
|
|
{
|
|
}
|
|
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
|
|
defined (AT32F407xx)
|
|
RCC_StepModeCmd(ENABLE);
|
|
#endif
|
|
/* Select PLL as system clock source */
|
|
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
|
|
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
|
|
|
|
/* Wait till PLL is used as system clock source */
|
|
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
|
|
{
|
|
}
|
|
#ifdef AT32F403xx
|
|
WaitHseStbl(PLL_STABLE_DELAY);
|
|
#endif
|
|
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
|
|
defined (AT32F407xx)
|
|
RCC_StepModeCmd(DISABLE);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
#elif defined SYSCLK_FREQ_240MHz_HSI
|
|
/**
|
|
* @brief Sets System clock frequency to 240MHz from HSI and configure HCLK, PCLK2
|
|
* and PCLK1 prescalers.
|
|
* @note This function should be used only after reset.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void SetSysClockTo240MHSI(void)
|
|
{
|
|
__IO uint32_t StartUpCounter = 0, HSIStatus = 0;
|
|
|
|
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
|
|
/* Enable HSI */
|
|
RCC->CTRL |= ((uint32_t)RCC_CTRL_HSIEN);
|
|
|
|
/* Wait till HSI is ready and if Time out is reached exit */
|
|
do
|
|
{
|
|
HSIStatus = RCC->CTRL & RCC_CTRL_HSISTBL;
|
|
StartUpCounter++;
|
|
}
|
|
while((HSIStatus == 0) && (StartUpCounter != 0xFFFF));
|
|
|
|
if ((RCC->CTRL & RCC_CTRL_HSISTBL) != RESET)
|
|
{
|
|
HSIStatus = (uint32_t)0x01;
|
|
}
|
|
else
|
|
{
|
|
HSIStatus = (uint32_t)0x00;
|
|
}
|
|
|
|
if (HSIStatus == (uint32_t)0x01)
|
|
{
|
|
/* HCLK = SYSCLK */
|
|
RCC->CFG |= (uint32_t)RCC_CFG_AHBPSC_DIV1;
|
|
|
|
/* PCLK2 = HCLK/2 */
|
|
RCC->CFG &= 0xFFFFC7FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB2PSC_DIV2;
|
|
|
|
/* PCLK1 = HCLK/2 */
|
|
RCC->CFG &= 0xFFFFF8FF;
|
|
RCC->CFG |= (uint32_t)RCC_CFG_APB1PSC_DIV2;
|
|
|
|
/* PLL configuration: PLLCLK = (HSI/2) * 60 = 240 MHz */
|
|
RCC->CFG &= RCC_CFG_PLLCFG_MASK;
|
|
RCC->CFG |= (uint32_t)(RCC_CFG_PLLRC_HSI_DIV2 | RCC_CFG_PLLMULT60 | RCC_CFG_PLLRANGE_GT72MHZ);
|
|
|
|
/* Enable PLL */
|
|
RCC->CTRL |= RCC_CTRL_PLLEN;
|
|
|
|
/* Wait till PLL is ready */
|
|
while((RCC->CTRL & RCC_CTRL_PLLSTBL) == 0)
|
|
{
|
|
}
|
|
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
|
|
defined (AT32F407xx)
|
|
RCC_StepModeCmd(ENABLE);
|
|
#endif
|
|
/* Select PLL as system clock source */
|
|
RCC->CFG &= (uint32_t)((uint32_t)~(RCC_CFG_SYSCLKSEL));
|
|
RCC->CFG |= (uint32_t)RCC_CFG_SYSCLKSEL_PLL;
|
|
|
|
/* Wait till PLL is used as system clock source */
|
|
while ((RCC->CFG & (uint32_t)RCC_CFG_SYSCLKSTS) != RCC_CFG_SYSCLKSTS_PLL)
|
|
{
|
|
}
|
|
#ifdef AT32F403xx
|
|
WaitHseStbl(PLL_STABLE_DELAY);
|
|
#endif
|
|
#if defined (AT32F413xx) || defined (AT32F403Axx)|| \
|
|
defined (AT32F407xx)
|
|
RCC_StepModeCmd(DISABLE);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
#endif
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/******************* (C) COPYRIGHT 2018 ArteryTek *****END OF FILE****/
|