rt-thread/bsp/k210/driver/Kconfig

162 lines
3.9 KiB
Plaintext
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

config BSP_USING_UART_HS
bool "Enable High Speed UART"
default y
menu "General Purpose UARTs"
menuconfig BSP_USING_UART1
bool "Enable UART1"
default n
if BSP_USING_UART1
config BSP_UART1_TXD_PIN
int "uart1 TXD pin number"
default 20
config BSP_UART1_RXD_PIN
int "uart1 RXD pin number"
default 21
endif
menuconfig BSP_USING_UART2
bool "Enable UART2"
default n
if BSP_USING_UART2
config BSP_UART2_TXD_PIN
int "uart2 TXD pin number"
default 28
config BSP_UART2_RXD_PIN
int "uart2 RXD pin number"
default 27
endif
menuconfig BSP_USING_UART3
bool "Enable UART3"
default n
if BSP_USING_UART3
config BSP_UART3_TXD_PIN
int "uart3 TXD pin number"
default 22
config BSP_UART3_RXD_PIN
int "uart3 RXD pin number"
default 23
endif
endmenu
config BSP_USING_I2C1
bool "Enable I2C1 (GPIO0/1)"
select RT_USING_I2C
default n
menuconfig BSP_USING_SPI1
bool "Enable SPI1"
select RT_USING_SPI
default n
if BSP_USING_SPI1
config BSP_USING_SPI1_AS_QSPI
bool
default n
config BSP_SPI1_CLK_PIN
int "spi1 clk pin number"
default 29
config BSP_SPI1_D0_PIN
int "spi1 d0 pin number"
default 30
config BSP_SPI1_D1_PIN
int "spi1 d1 pin number"
default 31
if BSP_USING_SPI1_AS_QSPI
config BSP_SPI1_D2_PIN
int "spi1 d2 pin number"
default 32
config BSP_SPI1_D3_PIN
int "spi1 d3 pin number"
default 33
endif
menuconfig BSP_SPI1_USING_SS0
bool "SPI1 Enable SS0"
default n
if BSP_SPI1_USING_SS0
config BSP_SPI1_SS0_PIN
int "spi1 ss0 pin number"
default 32
endif
menuconfig BSP_SPI1_USING_SS1
bool "SPI1 Enable SS1"
default n
if BSP_SPI1_USING_SS1
config BSP_SPI1_SS1_PIN
int "spi1 ss1 pin number"
default 25
endif
menuconfig BSP_SPI1_USING_SS2
bool "SPI1 Enable SS2"
default n
if BSP_SPI1_USING_SS2
config BSP_SPI1_SS2_PIN
int "spi1 ss2 pin number"
default 26
endif
menuconfig BSP_SPI1_USING_SS3
bool "SPI1 Enable SS3"
default n
if BSP_SPI1_USING_SS3
config BSP_SPI1_SS3_PIN
int "spi1 ss3 pin number"
default 27
endif
endif
menuconfig BSP_USING_LCD
bool "Enable LCD on SPI0"
default n
if BSP_USING_LCD
config BSP_LCD_CS_PIN
int "CS pin number of 8080 interface"
default 6
config BSP_LCD_WR_PIN
int "WR pin number of 8080 interface"
default 7
config BSP_LCD_DC_PIN
int "DC pin number of 8080 interface"
default 8
config BSP_LCD_X_MAX
int "LCD Height"
default 240
config BSP_LCD_Y_MAX
int "LCD Width"
default 320
endif
menuconfig BSP_USING_CAMERA
bool "Enable Camera"
default n
if BSP_USING_CAMERA
config BSP_CAMERA_SCCB_SDA_PIN
int "SCCB SDA pin number for camera"
default 9
config BSP_CAMERA_SCCB_SCLK_PIN
int "SCCB SCLK pin number for camera"
default 10
config BSP_CAMERA_CMOS_RST_PIN
int "CMOS RST pin number for camera"
default 11
config BSP_CAMERA_CMOS_VSYNC_PIN
int "CMOS VSYNC pin number for camera"
default 12
config BSP_CAMERA_CMOS_PWDN_PIN
int "CMOS PWDN pin number for camera"
default 13
config BSP_CAMERA_CMOS_XCLK_PIN
int "CMOS XCLK pin number for camera"
default 14
config BSP_CAMERA_CMOS_PCLK_PIN
int "CMOS PCLK pin number for camera"
default 15
config BSP_CAMERA_CMOS_HREF_PIN
int "CMOS HREF pin number for camera"
default 17
endif