rt-thread/bsp/frdm-k64f/device/MK64F12/fsl_sysmpu.h

436 lines
19 KiB
C

/*
* Copyright (c) 2015 - 2016, Freescale Semiconductor, Inc.
* Copyright 2016-2017 NXP
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* o Redistributions of source code must retain the above copyright notice, this list
* of conditions and the following disclaimer.
*
* o Redistributions in binary form must reproduce the above copyright notice, this
* list of conditions and the following disclaimer in the documentation and/or
* other materials provided with the distribution.
*
* o Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _FSL_SYSMPU_H_
#define _FSL_SYSMPU_H_
#include "fsl_common.h"
/*!
* @addtogroup sysmpu
* @{
*/
/*******************************************************************************
* Definitions
******************************************************************************/
/*! @name Driver version */
/*@{*/
/*! @brief SYSMPU driver version 2.2.0. */
#define FSL_SYSMPU_DRIVER_VERSION (MAKE_VERSION(2, 2, 0))
/*@}*/
/*! @brief define the start master port with read and write attributes. */
#define SYSMPU_MASTER_RWATTRIBUTE_START_PORT (4)
/*! @brief SYSMPU the bit shift for masters with privilege rights: read write and execute. */
#define SYSMPU_REGION_RWXRIGHTS_MASTER_SHIFT(n) (n * 6)
/*! @brief SYSMPU masters with read, write and execute rights bit mask. */
#define SYSMPU_REGION_RWXRIGHTS_MASTER_MASK(n) (0x1Fu << SYSMPU_REGION_RWXRIGHTS_MASTER_SHIFT(n))
/*! @brief SYSMPU masters with read, write and execute rights bit width. */
#define SYSMPU_REGION_RWXRIGHTS_MASTER_WIDTH 5
/*! @brief SYSMPU masters with read, write and execute rights priority setting. */
#define SYSMPU_REGION_RWXRIGHTS_MASTER(n, x) \
(((uint32_t)(((uint32_t)(x)) << SYSMPU_REGION_RWXRIGHTS_MASTER_SHIFT(n))) & SYSMPU_REGION_RWXRIGHTS_MASTER_MASK(n))
/*! @brief SYSMPU masters with read, write and execute rights process enable bit shift. */
#define SYSMPU_REGION_RWXRIGHTS_MASTER_PE_SHIFT(n) (n * 6 + SYSMPU_REGION_RWXRIGHTS_MASTER_WIDTH)
/*! @brief SYSMPU masters with read, write and execute rights process enable bit mask. */
#define SYSMPU_REGION_RWXRIGHTS_MASTER_PE_MASK(n) (0x1u << SYSMPU_REGION_RWXRIGHTS_MASTER_PE_SHIFT(n))
/*! @brief SYSMPU masters with read, write and execute rights process enable setting. */
#define SYSMPU_REGION_RWXRIGHTS_MASTER_PE(n, x) \
(((uint32_t)(((uint32_t)(x)) << SYSMPU_REGION_RWXRIGHTS_MASTER_PE_SHIFT(n))) & SYSMPU_REGION_RWXRIGHTS_MASTER_PE_MASK(n))
/*! @brief SYSMPU masters with normal read write permission bit shift. */
#define SYSMPU_REGION_RWRIGHTS_MASTER_SHIFT(n) ((n - SYSMPU_MASTER_RWATTRIBUTE_START_PORT) * 2 + 24)
/*! @brief SYSMPU masters with normal read write rights bit mask. */
#define SYSMPU_REGION_RWRIGHTS_MASTER_MASK(n) (0x3u << SYSMPU_REGION_RWRIGHTS_MASTER_SHIFT(n))
/*! @brief SYSMPU masters with normal read write rights priority setting. */
#define SYSMPU_REGION_RWRIGHTS_MASTER(n, x) \
(((uint32_t)(((uint32_t)(x)) << SYSMPU_REGION_RWRIGHTS_MASTER_SHIFT(n))) & SYSMPU_REGION_RWRIGHTS_MASTER_MASK(n))
/*! @brief Describes the number of SYSMPU regions. */
typedef enum _sysmpu_region_total_num
{
kSYSMPU_8Regions = 0x0U, /*!< SYSMPU supports 8 regions. */
kSYSMPU_12Regions = 0x1U, /*!< SYSMPU supports 12 regions. */
kSYSMPU_16Regions = 0x2U /*!< SYSMPU supports 16 regions. */
} sysmpu_region_total_num_t;
/*! @brief SYSMPU slave port number. */
typedef enum _sysmpu_slave
{
kSYSMPU_Slave0 = 0U, /*!< SYSMPU slave port 0. */
kSYSMPU_Slave1 = 1U, /*!< SYSMPU slave port 1. */
kSYSMPU_Slave2 = 2U, /*!< SYSMPU slave port 2. */
kSYSMPU_Slave3 = 3U, /*!< SYSMPU slave port 3. */
kSYSMPU_Slave4 = 4U, /*!< SYSMPU slave port 4. */
#if FSL_FEATURE_SYSMPU_SLAVE_COUNT > 5
kSYSMPU_Slave5 = 5U, /*!< SYSMPU slave port 5. */
#endif
#if FSL_FEATURE_SYSMPU_SLAVE_COUNT > 6
kSYSMPU_Slave6 = 6U, /*!< SYSMPU slave port 6. */
#endif
#if FSL_FEATURE_SYSMPU_SLAVE_COUNT > 7
kSYSMPU_Slave7 = 7U, /*!< SYSMPU slave port 7. */
#endif
} sysmpu_slave_t;
/*! @brief SYSMPU error access control detail. */
typedef enum _sysmpu_err_access_control
{
kSYSMPU_NoRegionHit = 0U, /*!< No region hit error. */
kSYSMPU_NoneOverlappRegion = 1U, /*!< Access single region error. */
kSYSMPU_OverlappRegion = 2U /*!< Access overlapping region error. */
} sysmpu_err_access_control_t;
/*! @brief SYSMPU error access type. */
typedef enum _sysmpu_err_access_type
{
kSYSMPU_ErrTypeRead = 0U, /*!< SYSMPU error access type --- read. */
kSYSMPU_ErrTypeWrite = 1U /*!< SYSMPU error access type --- write. */
} sysmpu_err_access_type_t;
/*! @brief SYSMPU access error attributes.*/
typedef enum _sysmpu_err_attributes
{
kSYSMPU_InstructionAccessInUserMode = 0U, /*!< Access instruction error in user mode. */
kSYSMPU_DataAccessInUserMode = 1U, /*!< Access data error in user mode. */
kSYSMPU_InstructionAccessInSupervisorMode = 2U, /*!< Access instruction error in supervisor mode. */
kSYSMPU_DataAccessInSupervisorMode = 3U /*!< Access data error in supervisor mode. */
} sysmpu_err_attributes_t;
/*! @brief SYSMPU access rights in supervisor mode for bus master 0 ~ 3. */
typedef enum _sysmpu_supervisor_access_rights
{
kSYSMPU_SupervisorReadWriteExecute = 0U, /*!< Read write and execute operations are allowed in supervisor mode. */
kSYSMPU_SupervisorReadExecute = 1U, /*!< Read and execute operations are allowed in supervisor mode. */
kSYSMPU_SupervisorReadWrite = 2U, /*!< Read write operations are allowed in supervisor mode. */
kSYSMPU_SupervisorEqualToUsermode = 3U /*!< Access permission equal to user mode. */
} sysmpu_supervisor_access_rights_t;
/*! @brief SYSMPU access rights in user mode for bus master 0 ~ 3. */
typedef enum _sysmpu_user_access_rights
{
kSYSMPU_UserNoAccessRights = 0U, /*!< No access allowed in user mode. */
kSYSMPU_UserExecute = 1U, /*!< Execute operation is allowed in user mode. */
kSYSMPU_UserWrite = 2U, /*!< Write operation is allowed in user mode. */
kSYSMPU_UserWriteExecute = 3U, /*!< Write and execute operations are allowed in user mode. */
kSYSMPU_UserRead = 4U, /*!< Read is allowed in user mode. */
kSYSMPU_UserReadExecute = 5U, /*!< Read and execute operations are allowed in user mode. */
kSYSMPU_UserReadWrite = 6U, /*!< Read and write operations are allowed in user mode. */
kSYSMPU_UserReadWriteExecute = 7U /*!< Read write and execute operations are allowed in user mode. */
} sysmpu_user_access_rights_t;
/*! @brief SYSMPU hardware basic information. */
typedef struct _sysmpu_hardware_info
{
uint8_t hardwareRevisionLevel; /*!< Specifies the SYSMPU's hardware and definition reversion level. */
uint8_t slavePortsNumbers; /*!< Specifies the number of slave ports connected to SYSMPU. */
sysmpu_region_total_num_t regionsNumbers; /*!< Indicates the number of region descriptors implemented. */
} sysmpu_hardware_info_t;
/*! @brief SYSMPU detail error access information. */
typedef struct _sysmpu_access_err_info
{
uint32_t master; /*!< Access error master. */
sysmpu_err_attributes_t attributes; /*!< Access error attributes. */
sysmpu_err_access_type_t accessType; /*!< Access error type. */
sysmpu_err_access_control_t accessControl; /*!< Access error control. */
uint32_t address; /*!< Access error address. */
#if FSL_FEATURE_SYSMPU_HAS_PROCESS_IDENTIFIER
uint8_t processorIdentification; /*!< Access error processor identification. */
#endif /* FSL_FEATURE_SYSMPU_HAS_PROCESS_IDENTIFIER */
} sysmpu_access_err_info_t;
/*! @brief SYSMPU read/write/execute rights control for bus master 0 ~ 3. */
typedef struct _sysmpu_rwxrights_master_access_control
{
sysmpu_supervisor_access_rights_t superAccessRights; /*!< Master access rights in supervisor mode. */
sysmpu_user_access_rights_t userAccessRights; /*!< Master access rights in user mode. */
#if FSL_FEATURE_SYSMPU_HAS_PROCESS_IDENTIFIER
bool processIdentifierEnable; /*!< Enables or disables process identifier. */
#endif /* FSL_FEATURE_SYSMPU_HAS_PROCESS_IDENTIFIER */
} sysmpu_rwxrights_master_access_control_t;
/*! @brief SYSMPU read/write access control for bus master 4 ~ 7. */
typedef struct _sysmpu_rwrights_master_access_control
{
bool writeEnable; /*!< Enables or disables write permission. */
bool readEnable; /*!< Enables or disables read permission. */
} sysmpu_rwrights_master_access_control_t;
/*!
* @brief SYSMPU region configuration structure.
*
* This structure is used to configure the regionNum region.
* The accessRights1[0] ~ accessRights1[3] are used to configure the bus master
* 0 ~ 3 with the privilege rights setting. The accessRights2[0] ~ accessRights2[3]
* are used to configure the high master 4 ~ 7 with the normal read write permission.
* The master port assignment is the chip configuration. Normally, the core is the
* master 0, debugger is the master 1.
* Note that the SYSMPU assigns a priority scheme where the debugger is treated as the highest
* priority master followed by the core and then all the remaining masters.
* SYSMPU protection does not allow writes from the core to affect the "regionNum 0" start
* and end address nor the permissions associated with the debugger. It can only write
* the permission fields associated with the other masters. This protection guarantees that
* the debugger always has access to the entire address space and those rights can't
* be changed by the core or any other bus master. Prepare
* the region configuration when regionNum is 0.
*/
typedef struct _sysmpu_region_config
{
uint32_t regionNum; /*!< SYSMPU region number, range form 0 ~ FSL_FEATURE_SYSMPU_DESCRIPTOR_COUNT - 1. */
uint32_t startAddress; /*!< Memory region start address. Note: bit0 ~ bit4 always be marked as 0 by SYSMPU. The actual
start address is 0-modulo-32 byte address. */
uint32_t endAddress; /*!< Memory region end address. Note: bit0 ~ bit4 always be marked as 1 by SYSMPU. The actual end
address is 31-modulo-32 byte address. */
sysmpu_rwxrights_master_access_control_t accessRights1[4]; /*!< Masters with read, write and execute rights setting. */
sysmpu_rwrights_master_access_control_t accessRights2[4]; /*!< Masters with normal read write rights setting. */
#if FSL_FEATURE_SYSMPU_HAS_PROCESS_IDENTIFIER
uint8_t processIdentifier; /*!< Process identifier used when "processIdentifierEnable" set with true. */
uint8_t
processIdMask; /*!< Process identifier mask. The setting bit will ignore the same bit in process identifier. */
#endif /* FSL_FEATURE_SYSMPU_HAS_PROCESS_IDENTIFIER */
} sysmpu_region_config_t;
/*!
* @brief The configuration structure for the SYSMPU initialization.
*
* This structure is used when calling the SYSMPU_Init function.
*/
typedef struct _sysmpu_config
{
sysmpu_region_config_t regionConfig; /*!< Region access permission. */
struct _sysmpu_config *next; /*!< Pointer to the next structure. */
} sysmpu_config_t;
/*******************************************************************************
* API
******************************************************************************/
#if defined(__cplusplus)
extern "C" {
#endif /* _cplusplus */
/*!
* @name Initialization and deinitialization
* @{
*/
/*!
* @brief Initializes the SYSMPU with the user configuration structure.
*
* This function configures the SYSMPU module with the user-defined configuration.
*
* @param base SYSMPU peripheral base address.
* @param config The pointer to the configuration structure.
*/
void SYSMPU_Init(SYSMPU_Type *base, const sysmpu_config_t *config);
/*!
* @brief Deinitializes the SYSMPU regions.
*
* @param base SYSMPU peripheral base address.
*/
void SYSMPU_Deinit(SYSMPU_Type *base);
/* @}*/
/*!
* @name Basic Control Operations
* @{
*/
/*!
* @brief Enables/disables the SYSMPU globally.
*
* Call this API to enable or disable the SYSMPU module.
*
* @param base SYSMPU peripheral base address.
* @param enable True enable SYSMPU, false disable SYSMPU.
*/
static inline void SYSMPU_Enable(SYSMPU_Type *base, bool enable)
{
if (enable)
{
/* Enable the SYSMPU globally. */
base->CESR |= SYSMPU_CESR_VLD_MASK;
}
else
{ /* Disable the SYSMPU globally. */
base->CESR &= ~SYSMPU_CESR_VLD_MASK;
}
}
/*!
* @brief Enables/disables the SYSMPU for a special region.
*
* When SYSMPU is enabled, call this API to disable an unused region
* of an enabled SYSMPU. Call this API to minimize the power dissipation.
*
* @param base SYSMPU peripheral base address.
* @param number SYSMPU region number.
* @param enable True enable the special region SYSMPU, false disable the special region SYSMPU.
*/
static inline void SYSMPU_RegionEnable(SYSMPU_Type *base, uint32_t number, bool enable)
{
if (enable)
{
/* Enable the #number region SYSMPU. */
base->WORD[number][3] |= SYSMPU_WORD_VLD_MASK;
}
else
{ /* Disable the #number region SYSMPU. */
base->WORD[number][3] &= ~SYSMPU_WORD_VLD_MASK;
}
}
/*!
* @brief Gets the SYSMPU basic hardware information.
*
* @param base SYSMPU peripheral base address.
* @param hardwareInform The pointer to the SYSMPU hardware information structure. See "sysmpu_hardware_info_t".
*/
void SYSMPU_GetHardwareInfo(SYSMPU_Type *base, sysmpu_hardware_info_t *hardwareInform);
/*!
* @brief Sets the SYSMPU region.
*
* Note: Due to the SYSMPU protection, the region number 0 does not allow writes from
* core to affect the start and end address nor the permissions associated with
* the debugger. It can only write the permission fields associated
* with the other masters.
*
* @param base SYSMPU peripheral base address.
* @param regionConfig The pointer to the SYSMPU user configuration structure. See "sysmpu_region_config_t".
*/
void SYSMPU_SetRegionConfig(SYSMPU_Type *base, const sysmpu_region_config_t *regionConfig);
/*!
* @brief Sets the region start and end address.
*
* Memory region start address. Note: bit0 ~ bit4 is always marked as 0 by SYSMPU.
* The actual start address by SYSMPU is 0-modulo-32 byte address.
* Memory region end address. Note: bit0 ~ bit4 always be marked as 1 by SYSMPU.
* The end address used by the SYSMPU is 31-modulo-32 byte address.
* Note: Due to the SYSMPU protection, the startAddr and endAddr can't be
* changed by the core when regionNum is 0.
*
* @param base SYSMPU peripheral base address.
* @param regionNum SYSMPU region number. The range is from 0 to
* FSL_FEATURE_SYSMPU_DESCRIPTOR_COUNT - 1.
* @param startAddr Region start address.
* @param endAddr Region end address.
*/
void SYSMPU_SetRegionAddr(SYSMPU_Type *base, uint32_t regionNum, uint32_t startAddr, uint32_t endAddr);
/*!
* @brief Sets the SYSMPU region access rights for masters with read, write, and execute rights.
* The SYSMPU access rights depend on two board classifications of bus masters.
* The privilege rights masters and the normal rights masters.
* The privilege rights masters have the read, write, and execute access rights.
* Except the normal read and write rights, the execute rights are also
* allowed for these masters. The privilege rights masters normally range from
* bus masters 0 - 3. However, the maximum master number is device-specific.
* See the "SYSMPU_PRIVILEGED_RIGHTS_MASTER_MAX_INDEX".
* The normal rights masters access rights control see
* "SYSMPU_SetRegionRwMasterAccessRights()".
*
* @param base SYSMPU peripheral base address.
* @param regionNum SYSMPU region number. Should range from 0 to
* FSL_FEATURE_SYSMPU_DESCRIPTOR_COUNT - 1.
* @param masterNum SYSMPU bus master number. Should range from 0 to
* SYSMPU_PRIVILEGED_RIGHTS_MASTER_MAX_INDEX.
* @param accessRights The pointer to the SYSMPU access rights configuration. See "sysmpu_rwxrights_master_access_control_t".
*/
void SYSMPU_SetRegionRwxMasterAccessRights(SYSMPU_Type *base,
uint32_t regionNum,
uint32_t masterNum,
const sysmpu_rwxrights_master_access_control_t *accessRights);
#if FSL_FEATURE_SYSMPU_MASTER_COUNT > 4
/*!
* @brief Sets the SYSMPU region access rights for masters with read and write rights.
* The SYSMPU access rights depend on two board classifications of bus masters.
* The privilege rights masters and the normal rights masters.
* The normal rights masters only have the read and write access permissions.
* The privilege rights access control see "SYSMPU_SetRegionRwxMasterAccessRights".
*
* @param base SYSMPU peripheral base address.
* @param regionNum SYSMPU region number. The range is from 0 to
* FSL_FEATURE_SYSMPU_DESCRIPTOR_COUNT - 1.
* @param masterNum SYSMPU bus master number. Should range from SYSMPU_MASTER_RWATTRIBUTE_START_PORT
* to ~ FSL_FEATURE_SYSMPU_MASTER_COUNT - 1.
* @param accessRights The pointer to the SYSMPU access rights configuration. See "sysmpu_rwrights_master_access_control_t".
*/
void SYSMPU_SetRegionRwMasterAccessRights(SYSMPU_Type *base,
uint32_t regionNum,
uint32_t masterNum,
const sysmpu_rwrights_master_access_control_t *accessRights);
#endif /* FSL_FEATURE_SYSMPU_MASTER_COUNT > 4 */
/*!
* @brief Gets the numbers of slave ports where errors occur.
*
* @param base SYSMPU peripheral base address.
* @param slaveNum SYSMPU slave port number.
* @return The slave ports error status.
* true - error happens in this slave port.
* false - error didn't happen in this slave port.
*/
bool SYSMPU_GetSlavePortErrorStatus(SYSMPU_Type *base, sysmpu_slave_t slaveNum);
/*!
* @brief Gets the SYSMPU detailed error access information.
*
* @param base SYSMPU peripheral base address.
* @param slaveNum SYSMPU slave port number.
* @param errInform The pointer to the SYSMPU access error information. See "sysmpu_access_err_info_t".
*/
void SYSMPU_GetDetailErrorAccessInfo(SYSMPU_Type *base, sysmpu_slave_t slaveNum, sysmpu_access_err_info_t *errInform);
/* @} */
#if defined(__cplusplus)
}
#endif
/*! @}*/
#endif /* _FSL_SYSMPU_H_ */