libs/rt-thread
libs
/
rt-thread
4
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
rt-thread/bsp/stm32/stm32f412-st-nucleo/applications/arduino_pinout
History
Meco Man ac2fb2beab [rtduino] 修正pinout_arduino文件所在Group名称 2022-11-05 10:56:36 -04:00
..
README.md [bsp][rtduino] update readme 2022-10-12 14:20:46 +08:00
README_zh.md [bsp][rtduino] update readme 2022-10-12 14:20:46 +08:00
Sconscript [rtduino] 修正pinout_arduino文件所在Group名称 2022-11-05 10:56:36 -04:00
nucleo-f412-pinout.png [rtduino] 对接STM32F412 NUCLEO (#6461) 2022-09-25 22:38:35 -04:00
pins_arduino.c [rtduino] 对接STM32F412 NUCLEO (#6461) 2022-09-25 22:38:35 -04:00
pins_arduino.h [rtduino] 对接STM32F412 NUCLEO (#6461) 2022-09-25 22:38:35 -04:00

README.md

The Arduino Compatible for STM32F412 Nucleo Board

English | 中文

1 RTduino - Arduino Ecosystem Compatibility Layer for RT-Thread

STM32F412 Nucleo board has support RTduino. Users can use Arduino APIs, third party libraries and programming method to program on the board.

1.1 How to Enable RTduino

Please go to the RTduino repository to see the details.

Hardware Drivers Config --->
    Onboard Peripheral Drivers --->
        [*] Compatible with Arduino Ecosystem (RTduino)

2 Arduino Pinout

nucleo-f412-pinout

This board complies with Arduino UNO pins layout. For more details, please take a look at: pins_arduino.c and pins_arduino.h.

Arduino Pin STM32 Pin 5V Tolerate Note
0 (D0) PG9 Yes Serial-Rx. Token over by RT-Thread UART device by default
1 (D1) PG14 Yes Serial-Tx. Token over by RT-Thread UART device by default
2 (D2) PF15 Yes
3 (D3) PE13 Yes PWM1-CH3. Token over by RT-Thread PWM device by default
4 (D4) PF14 Yes
5 (D5) PE11 Yes PWM1-CH2. Token over by RT-Thread PWM device by default
6 (D6) PE9 Yes PWM1-CH1. Token over by RT-Thread PWM device by default
7 (D7) PF13 Yes
8 (D8) PF12 Yes
9 (D9) PD15 Yes PWM4-CH4. Token over by RT-Thread PWM device by default
10 (D10) PD14 Yes PWM4-CH3. Token over by RT-Thread PWM device by default
11 (D11) PA7 Yes PWM14-CH1. Token over by RT-Thread PWM device by default
12 (D12) PA6 Yes
13 (D13) PA5 Yes
14 (D14) PB9 Yes I2C-SDA. Token over by RT-Thread I2C device by default
15 (D15) PB8 Yes I2C-SCL. Token over by RT-Thread I2C device by default
16 (D16) PC13 Yes USER Button
17 (D17, LED_BUILTIN) PB0 Yes USER LED1
18 (D18) PB7 Yes USER LED2
19 (D19) PB14 Yes USER LED3
A0 PA3 Yes ADC1-CH3. Token over by RT-Thread ADC device by default
A1 PC0 Yes ADC1-CH10. Token over by RT-Thread ADC device by default
A2 PC3 Yes ADC1-CH13. Token over by RT-Thread ADC device by default
A3 PC1 Yes ADC1-CH11. Token over by RT-Thread ADC device by default
A4 PC4 Yes ADC1-CH14. Token over by RT-Thread ADC device by default
A5 PC5 Yes ADC1-CH15. Token over by RT-Thread ADC device by default
A6 -- On-chip internal voltage sensor. ADC1-CH17. Token over by RT-Thread ADC device by default
A7 -- On-chip internal temperature sensor. ADC1-CH16. Token over by RT-Thread ADC device by default

Notice:

  1. Don't use a same hardware timer to drive PWM (analogRead) and servos at same time, because hardware timer can only generate a same frequency for 4 PWM channels. Otherwise, it could cause a failure when drive servos.

References

  1. STM32 Nucleo-144 user manual

3 Communication

3.1 I2C Bus

I2C bus is SCL/D15 and SDA/D14 pins. Users can directly include the #include <Wire.h>, which is the Arduino official I2C header file, to use the I2C bus.

3.2 SPI Bus

This board doesn't support Arduino SPI header file and functions.

3.3 Serial

This board supports to use Serial. method to operate uart3 device. See example.