rt-thread/bsp/imxrt/libraries/MIMXRT1050/CMSIS/Driver/DriverTemplates/Driver_MCI.c

220 lines
4.7 KiB
C

/*
* Copyright (c) 2013-2018 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "Driver_MCI.h"
#define ARM_MCI_DRV_VERSION ARM_DRIVER_VERSION_MAJOR_MINOR(2, 0) /* driver version */
/* Driver Version */
static const ARM_DRIVER_VERSION DriverVersion = {
ARM_MCI_API_VERSION,
ARM_MCI_DRV_VERSION
};
/* Driver Capabilities */
static const ARM_MCI_CAPABILITIES DriverCapabilities = {
0, /* cd_state */
0, /* cd_event */
0, /* vdd */
0, /* vdd_1v8 */
0, /* vccq */
0, /* vccq_1v8 */
0, /* vccq_1v2 */
1, /* data_width_4 */
1, /* data_width_8 */
0, /* data_width_4_ddr */
0, /* data_width_8_ddr */
0, /* high_speed */
0, /* uhs_signaling */
0, /* uhs_tuning */
0, /* uhs_sdr50 */
0, /* uhs_sdr104 */
0, /* uhs_ddr50 */
0, /* uhs_driver_type_a */
0, /* uhs_driver_type_c */
0, /* uhs_driver_type_d */
1, /* sdio_interrupt */
1, /* read_wait */
0, /* suspend_resume */
0, /* mmc_interrupt */
0, /* mmc_boot */
0, /* ccs */
0 /* ccs_timeout */
};
//
// Functions
//
ARM_DRIVER_VERSION ARM_MCI_GetVersion(void)
{
}
ARM_MCI_CAPABILITIES ARM_MCI_GetCapabilities(void)
{
}
int32_t ARM_MCI_Initialize(ARM_MCI_SignalEvent_t cb_event)
{
}
int32_t ARM_MCI_Uninitialize(void)
{
}
int32_t ARM_MCI_PowerControl(ARM_POWER_STATE state)
{
switch (state)
{
case ARM_POWER_OFF:
break;
case ARM_POWER_LOW:
break;
case ARM_POWER_FULL:
break;
default:
return ARM_DRIVER_ERROR_UNSUPPORTED;
}
}
int32_t ARM_MCI_CardPower(uint32_t voltage)
{
switch (voltage & ARM_MCI_POWER_VDD_Msk)
{
case ARM_MCI_POWER_VDD_OFF:
return ARM_DRIVER_OK;
case ARM_MCI_POWER_VDD_3V3:
return ARM_DRIVER_OK;
default:
break;
}
}
int32_t ARM_MCI_ReadCD(void)
{
}
int32_t ARM_MCI_ReadWP(void)
{
}
int32_t ARM_MCI_SendCommand(uint32_t cmd, uint32_t arg, uint32_t flags, uint32_t *response)
{
}
int32_t ARM_MCI_SetupTransfer(uint8_t *data, uint32_t block_count, uint32_t block_size, uint32_t mode)
{
}
int32_t ARM_MCI_AbortTransfer(void)
{
}
int32_t ARM_MCI_Control(uint32_t control, uint32_t arg)
{
switch (control)
{
case ARM_MCI_BUS_SPEED:
break;
case ARM_MCI_BUS_SPEED_MODE:
break;
case ARM_MCI_BUS_CMD_MODE:
/* Implement external pull-up control to support MMC cards in open-drain mode */
/* Default mode is push-pull and is configured in Driver_MCI0.Initialize() */
if (arg == ARM_MCI_BUS_CMD_PUSH_PULL)
{
/* Configure external circuit to work in push-pull mode */
}
else if (arg == ARM_MCI_BUS_CMD_OPEN_DRAIN)
{
/* Configure external circuit to work in open-drain mode */
}
else
{
return ARM_DRIVER_ERROR_UNSUPPORTED;
}
break;
case ARM_MCI_BUS_DATA_WIDTH:
switch (arg)
{
case ARM_MCI_BUS_DATA_WIDTH_1:
break;
case ARM_MCI_BUS_DATA_WIDTH_4:
break;
case ARM_MCI_BUS_DATA_WIDTH_8:
break;
default:
return ARM_DRIVER_ERROR_UNSUPPORTED;
}
break;
case ARM_MCI_CONTROL_RESET:
break;
case ARM_MCI_CONTROL_CLOCK_IDLE:
break;
case ARM_MCI_DATA_TIMEOUT:
break;
case ARM_MCI_MONITOR_SDIO_INTERRUPT:
break;
case ARM_MCI_CONTROL_READ_WAIT:
break;
case ARM_MCI_DRIVER_STRENGTH:
default: return ARM_DRIVER_ERROR_UNSUPPORTED;
}
}
ARM_MCI_STATUS ARM_MCI_GetStatus(void)
{
}
void ARM_MCI_SignalEvent(uint32_t event)
{
// function body
}
// End MCI Interface
ARM_DRIVER_MCI Driver_MCI = {
ARM_MCI_GetVersion,
ARM_MCI_GetCapabilities,
ARM_MCI_Initialize,
ARM_MCI_Uninitialize,
ARM_MCI_PowerControl,
ARM_MCI_CardPower,
ARM_MCI_ReadCD,
ARM_MCI_ReadWP,
ARM_MCI_SendCommand,
ARM_MCI_SetupTransfer,
ARM_MCI_AbortTransfer,
ARM_MCI_Control,
ARM_MCI_GetStatus
};