rt-thread/bsp/raspberry-pi/raspi2/cpu/trap.c

180 lines
4.1 KiB
C

/*
* Copyright (c) 2006-2021, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2013-07-20 Bernard first version
*/
#include <rthw.h>
#include <board.h>
#include <rtthread.h>
#include "armv7.h"
extern struct rt_thread *rt_current_thread;
#ifdef RT_USING_FINSH
extern long list_thread(void);
#endif
/**
* this function will show registers of CPU
*
* @param regs the registers point
*/
void rt_hw_show_register(struct rt_hw_exp_stack *regs)
{
rt_kprintf("Execption:\n");
rt_kprintf("r00:0x%08x r01:0x%08x r02:0x%08x r03:0x%08x\n", regs->r0, regs->r1, regs->r2, regs->r3);
rt_kprintf("r04:0x%08x r05:0x%08x r06:0x%08x r07:0x%08x\n", regs->r4, regs->r5, regs->r6, regs->r7);
rt_kprintf("r08:0x%08x r09:0x%08x r10:0x%08x\n", regs->r8, regs->r9, regs->r10);
rt_kprintf("fp :0x%08x ip :0x%08x\n", regs->fp, regs->ip);
rt_kprintf("sp :0x%08x lr :0x%08x pc :0x%08x\n", regs->sp, regs->lr, regs->pc);
rt_kprintf("cpsr:0x%08x\n", regs->cpsr);
}
/**
* When comes across an instruction which it cannot handle,
* it takes the undefined instruction trap.
*
* @param regs system registers
*
* @note never invoke this function in application
*/
void rt_hw_trap_undef(struct rt_hw_exp_stack *regs)
{
rt_kprintf("undefined instruction:\n");
rt_hw_show_register(regs);
#ifdef RT_USING_FINSH
list_thread();
#endif
rt_hw_cpu_shutdown();
}
/**
* The software interrupt instruction (SWI) is used for entering
* Supervisor mode, usually to request a particular supervisor
* function.
*
* @param regs system registers
*
* @note never invoke this function in application
*/
void rt_hw_trap_swi(struct rt_hw_exp_stack *regs)
{
rt_kprintf("software interrupt:\n");
rt_hw_show_register(regs);
#ifdef RT_USING_FINSH
list_thread();
#endif
rt_hw_cpu_shutdown();
}
/**
* An abort indicates that the current memory access cannot be completed,
* which occurs during an instruction prefetch.
*
* @param regs system registers
*
* @note never invoke this function in application
*/
void rt_hw_trap_pabt(struct rt_hw_exp_stack *regs)
{
rt_kprintf("prefetch abort:\n");
rt_hw_show_register(regs);
#ifdef RT_USING_FINSH
list_thread();
#endif
rt_hw_cpu_shutdown();
}
/**
* An abort indicates that the current memory access cannot be completed,
* which occurs during a data access.
*
* @param regs system registers
*
* @note never invoke this function in application
*/
void rt_hw_trap_dabt(struct rt_hw_exp_stack *regs)
{
rt_kprintf("data abort:");
rt_hw_show_register(regs);
#ifdef RT_USING_FINSH
list_thread();
#endif
rt_hw_cpu_shutdown();
}
/**
* Normally, system will never reach here
*
* @param regs system registers
*
* @note never invoke this function in application
*/
void rt_hw_trap_resv(struct rt_hw_exp_stack *regs)
{
rt_kprintf("reserved trap:\n");
rt_hw_show_register(regs);
#ifdef RT_USING_FINSH
list_thread();
#endif
rt_hw_cpu_shutdown();
}
void rt_hw_trap_irq(void)
{
void *param;
rt_isr_handler_t isr_func;
extern struct rt_irq_desc isr_table[];
uint32_t value = 0;
// rt_kprintf("pend basic: 0x%08x\n", IRQ_PEND_BASIC);
// rt_kprintf(" pend1: 0x%08x\n", IRQ_PEND1);
// rt_kprintf(" pend2: 0x%08x\n", IRQ_PEND2);
value = IRQ_PEND_BASIC & 0x3ff;
if (value)
{
uint32_t irq;
if (value & (1 << 8))
{
value = IRQ_PEND1;
irq = __rt_ffs(value) - 1;
}
else if (value & (1 << 9))
{
value = IRQ_PEND2;
irq = __rt_ffs(value) + 31;
}
else
{
value &= 0x0f;
irq = __rt_ffs(value) - 1;
}
/* get interrupt service routine */
isr_func = isr_table[irq].handler;
#ifdef RT_USING_INTERRUPT_INFO
isr_table[irq].counter++;
#endif
if (isr_func)
{
/* Interrupt for myself. */
param = isr_table[irq].param;
/* turn to interrupt service routine */
isr_func(irq, param);
}
}
}
void rt_hw_trap_fiq(void)
{
/* TODO */
}