139 lines
5.3 KiB
Markdown
Executable File
139 lines
5.3 KiB
Markdown
Executable File
[中文](README.md) | **English**
|
||
|
||
## Overview
|
||
CV180ZB/CV1800B/CV1801B are high-performance, low-power chips designed for consumer surveillance IP cameras, smart home devices, and other product areas. They integrate H.264/H.265 video compression encoders and ISPs, and support various image enhancement and correction algorithms such as digital wide dynamic range, 3D noise reduction, defogging, and lens distortion correction, providing professional-grade video image quality to customers.
|
||
|
||
1. Processor Core
|
||
- Main processor: RISCV C906 @ 1.0Ghz
|
||
- 32KB I-cache, 64KB D-Cache
|
||
- Integrated vector and floating-point units (FPU).
|
||
- Coprocessor: RISCV C906 @ 700Mhz
|
||
- Integrated floating-point unit (FPU).
|
||
|
||
2. Memory Interface
|
||
- Built-in DRAM: DDR2 16bitx1, with a maximum speed of 1333Mbps, capacity of 512Mbit (64MB).
|
||
- Support for SPI NOR flash interface (1.8V / 3.0V)
|
||
- Support for 1, 2, 4-wire modes
|
||
- Maximum support of 256MBytes
|
||
- Support for SPI Nand flash interface (1.8V / 3.0V)
|
||
- Support for 1KB/2KB/4KB page (corresponding to a maximum capacity of 16GB/32GB/64GB)
|
||
- Use the built-in ECC module of the device itself
|
||
|
||
3. Peripherals
|
||
- Up to 26 GPIO pins on the MilkV-Duo 40-pin header provide access to internal peripherals such as SDIO, I2C, PWM, SPI, J-TAG, and UART.
|
||
- Up to 3x I2C
|
||
- Up to 5x UART
|
||
- Up to 1x SDIO1
|
||
- Up to 1x SPI
|
||
- Up to 2x ADC
|
||
- Up to 7x PWM
|
||
- Up to 1x RUN
|
||
- Up to 1x JTAG
|
||
- Integrated MAC PHY supporting 10/100Mbps full-duplex or half-duplex mode
|
||
- One USB Host / device interface
|
||
|
||
## Toolchain Download
|
||
Download the `riscv64-unknown-linux-musl-gcc` toolchain from: [https://github.com/RT-Thread/toolchains-ci/releases/download/v1.7/riscv64-linux-musleabi_for_x86_64-pc-linux-gnu_latest.tar.bz2](https://github.com/RT-Thread/toolchains-ci/releases/download/v1.7/riscv64-linux-musleabi_for_x86_64-pc-linux-gnu_latest.tar.bz2)
|
||
|
||
> Note:
|
||
The current BSP only supports Linux compilation.
|
||
|
||
After correct extraction, add the local path of the `riscv64-unknown-linux-musl-gcc` toolchain to `EXEC_PATH` in `rtconfig.py`, or specify the path through the `RTT_EXEC_PATH` environment variable.
|
||
|
||
```shell
|
||
$ export RTT_EXEC_PATH=/opt/riscv64-linux-musleabi_for_x86_64-pc-linux-gnu/bin
|
||
```
|
||
|
||
## Compilation
|
||
1. Installing Dependencies
|
||
```shell
|
||
$ sudo apt install -y device-tree-compiler
|
||
```
|
||
On the Linux platform, you can execute:
|
||
|
||
```shell
|
||
$ scons --menuconfig
|
||
```
|
||
|
||
Select the type of target board that you want to compile:
|
||
```shell
|
||
Board Type (milkv-duo) --->
|
||
( ) milkv-duo
|
||
(X) milkv-duo256m
|
||
```
|
||
|
||
It will automatically download environment-related scripts to the ~/.env directory, and then execute
|
||
```shell
|
||
$ source ~/.env/env.sh
|
||
$ pkgs --update
|
||
```
|
||
|
||
After updating the software packages, use `scons -j10` or `scons -j10 --verbose` to compile this board support package. Alternatively, you can use the command `scons --exec-path="GCC_toolchain_path"` to specify the toolchain location for compilation. If the compilation is successful, an rtthread.elf file will be generated.
|
||
|
||
After the compilation is completed, the script automatically calls the `./mksdimg.sh` script to package and generate the `boot.sd` file, which is the kernel file for SD card boot.
|
||
|
||
## Running
|
||
1. Divide the SD card into 2 partitions, with the first partition used to store bin files and the second partition used as a data storage partition. The partition format is FAT32.
|
||
|
||
2. Copy the `fip.bin` and `boot.sd` files from the root directory to the first partition of the SD card. For subsequent firmware updates, you only need to copy the `boot.sd` file.
|
||
Where:
|
||
- fip.bin: the bin file after fsbl、opensbi and U-Boot are packaged
|
||
- boot.sd: the bin file after the kernel is packaged
|
||
|
||
After updating `boot.sd`, power on again and you will see the serial output information:
|
||
|
||
```shell
|
||
U-Boot 2021.10 (Jun 26 2023 - 14:09:06 +0800)cvitek_cv180x
|
||
|
||
DRAM: 63.3 MiB
|
||
gd->relocaddr=0x82435000. offset=0x2235000
|
||
MMC: cv-sd@4310000: 0
|
||
Loading Environment from <NULL>... OK
|
||
In: serial
|
||
Out: serial
|
||
Err: serial
|
||
Net:
|
||
Warning: ethernet@4070000 (eth0) using random MAC address - 62:80:19:6c:d4:64
|
||
eth0: ethernet@4070000
|
||
Hit any key to stop autoboot: 0
|
||
Boot from SD ...
|
||
switch to partitions #0, OK
|
||
mmc0 is current device
|
||
132692 bytes read in 12 ms (10.5 MiB/s)
|
||
## Loading kernel from FIT Image at 81400000 ...
|
||
Using 'config-cv1800b_milkv_duo_sd' configuration
|
||
Trying 'kernel-1' kernel subimage
|
||
Verifying Hash Integrity ... crc32+ OK
|
||
## Loading fdt from FIT Image at 81400000 ...
|
||
Using 'config-cv1800b_milkv_duo_sd' configuration
|
||
Trying 'fdt-cv1800b_milkv_duo_sd' fdt subimage
|
||
Verifying Hash Integrity ... sha256+ OK
|
||
Booting using the fdt blob at 0x8141b590
|
||
Uncompressing Kernel Image
|
||
Decompressing 296768 bytes used 42ms
|
||
Loading Device Tree to 0000000081be5000, end 0000000081becb60 ... OK
|
||
|
||
Starting kernel ...
|
||
|
||
heap: [0x802766b0 - 0x812766b0]
|
||
|
||
\ | /
|
||
- RT - Thread Smart Operating System
|
||
/ | \ 5.0.1 build Jun 28 2023 23:44:36
|
||
2006 - 2022 Copyright by RT-Thread team
|
||
Hello RT-Smart!
|
||
msh />
|
||
```
|
||
## Driver Support List
|
||
|
||
| Driver | Support Status | Remarks |
|
||
| :----- | :------------- | :--------------------- |
|
||
| UART | Supported | Default baud rate 115200 |
|
||
|
||
## Supported Development Boards
|
||
- milk-v duo: [https://milkv.io/duo](https://milkv.io/duo)
|
||
|
||
## Contact information
|
||
|
||
Maintenance person：[flyingcys](https://github.com/flyingcys)
|