rt-thread/bsp/essemi/es32f369x/drivers/ES/es_conf_info_spi.h

160 lines
5.3 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/*
* Change Logs:
* Date Author Notes
* 2021-04-20 liuhy the first version
*
* Copyright (C) 2021 Shanghai Eastsoft Microelectronics Co., Ltd. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
*/
#ifndef __ES_CONF_INFO_SPI_H__
#define __ES_CONF_INFO_SPI_H__
#include "es_conf_info_map.h"
#include <ald_spi.h>
#include <ald_gpio.h>
#include <ald_cmu.h>
/* SPI 配置 */
#define SPI_BUS_CONFIG(_CONF_,_I_) do{_CONF_.mode = 0U; \
_CONF_.mode |= ( ES_SPI##_I_##_MASTER_SLAVE | \
ES_SPI##_I_##_WIRE_3_4 | \
ES_SPI##_I_##_CPHA_1_2 | \
ES_SPI##_I_##_CPOL_H_L | \
ES_SPI##_I_##_CS | \
ES_SPI##_I_##_M_L_SB ); \
_CONF_.data_width = ES_SPI##_I_##_DATA_W; \
_CONF_.max_hz = ES_SPI##_I_##_MAX_HZ; \
}while(0)
// spi_config.mode &= ~RT_SPI_SLAVE; /* 主机模式 */
// spi_config.mode &= ~RT_SPI_3WIRE; /* 4线双向传输 */
// spi_config.mode |= RT_SPI_CPHA; /* 第二边沿采样 */
// spi_config.mode |= RT_SPI_CPOL; /* 空闲高电平 */
// spi_config.mode |= RT_SPI_NO_CS; /* 禁用软件从机选择管理 */
// spi_config.mode |= RT_SPI_MSB; /* 高位在前 */
// spi_config.data_width = 8; /* 数据长度8 */
// spi_config.max_hz = 2000000; /* 最快时钟频率 */
#define ES_C_SPI_CLK_POL_HIGH RT_SPI_CPOL
#define ES_C_SPI_CLK_POL_LOW !RT_SPI_CPOL
#define ES_C_SPI_CLK_PHA_FIRST !RT_SPI_CPHA
#define ES_C_SPI_CLK_PHA_SECOND RT_SPI_CPHA
#define ES_C_SPI_MSB RT_SPI_MSB
#define ES_C_SPI_LSB RT_SPI_LSB
#define ES_C_SPI_CS_LOW_LEVEL 0
#define ES_C_SPI_CS_HIGH_LEVEL 1
/* codes_main */
#ifndef ES_DEVICE_NAME_SPI0_BUS
#define ES_DEVICE_NAME_SPI0_BUS "spi0"
#endif
#ifndef ES_DEVICE_NAME_SPI0_DEV0
#define ES_DEVICE_NAME_SPI0_DEV0 "spi00"
#endif
#ifndef ES_DEVICE_NAME_SPI1_BUS
#define ES_DEVICE_NAME_SPI1_BUS "spi1"
#endif
#ifndef ES_DEVICE_NAME_SPI1_DEV0
#define ES_DEVICE_NAME_SPI1_DEV0 "spi10"
#endif
#ifndef ES_DEVICE_NAME_SPI2_BUS
#define ES_DEVICE_NAME_SPI2_BUS "spi2"
#endif
#ifndef ES_DEVICE_NAME_SPI2_DEV0
#define ES_DEVICE_NAME_SPI2_DEV0 "spi20"
#endif
#define ES_SPI_CS_LEVEL ES_C_SPI_CS_LOW_LEVEL
#ifndef ES_SPI0_CPHA_1_2
#define ES_SPI0_CPHA_1_2 ES_C_SPI_CLK_PHA_SECOND
#endif
#ifndef ES_SPI0_CPOL_H_L
#define ES_SPI0_CPOL_H_L ES_C_SPI_CLK_POL_HIGH
#endif
#ifndef ES_SPI0_M_L_SB
#define ES_SPI0_M_L_SB RT_SPI_MSB
#endif
#ifndef ES_SPI0_MAX_HZ
#define ES_SPI0_MAX_HZ 2000000
#endif
#ifndef ES_SPI0_NSS_PIN
#define ES_SPI0_NSS_PIN 0xFFFFFFFF
#endif
#ifndef ES_SPI1_CPHA_1_2
#define ES_SPI1_CPHA_1_2 ES_C_SPI_CLK_PHA_SECOND
#endif
#ifndef ES_SPI1_CPOL_H_L
#define ES_SPI1_CPOL_H_L ES_C_SPI_CLK_POL_HIGH
#endif
#ifndef ES_SPI1_M_L_SB
#define ES_SPI1_M_L_SB RT_SPI_MSB
#endif
#ifndef ES_SPI1_MAX_HZ
#define ES_SPI1_MAX_HZ 2000000
#endif
#ifndef ES_SPI1_NSS_PIN
#define ES_SPI1_NSS_PIN 0xFFFFFFFF
#endif
#ifndef ES_SPI2_CPHA_1_2
#define ES_SPI2_CPHA_1_2 ES_C_SPI_CLK_PHA_SECOND
#endif
#ifndef ES_SPI2_CPOL_H_L
#define ES_SPI2_CPOL_H_L ES_C_SPI_CLK_POL_HIGH
#endif
#ifndef ES_SPI2_M_L_SB
#define ES_SPI2_M_L_SB RT_SPI_MSB
#endif
#ifndef ES_SPI2_MAX_HZ
#define ES_SPI2_MAX_HZ 2000000
#endif
#ifndef ES_SPI2_NSS_PIN
#define ES_SPI2_NSS_PIN 0xFFFFFFFF
#endif
#define ES_SPI0_MASTER_SLAVE !RT_SPI_SLAVE
#define ES_SPI0_WIRE_3_4 !RT_SPI_3WIRE
#define ES_SPI0_CS RT_SPI_NO_CS
#define ES_SPI0_DATA_W 8
#define ES_SPI1_MASTER_SLAVE !RT_SPI_SLAVE
#define ES_SPI1_WIRE_3_4 !RT_SPI_3WIRE
#define ES_SPI1_CS RT_SPI_NO_CS
#define ES_SPI1_DATA_W 8
#define ES_SPI2_MASTER_SLAVE !RT_SPI_SLAVE
#define ES_SPI2_WIRE_3_4 !RT_SPI_3WIRE
#define ES_SPI2_CS RT_SPI_NO_CS
#define ES_SPI2_DATA_W 8
#endif