rt-thread/bsp/apollo2/libraries/drivers/regs/am_reg_clkgen.h

491 lines
24 KiB
C

//*****************************************************************************
//
// am_reg_clkgen.h
//! @file
//!
//! @brief Register macros for the CLKGEN module
//
//*****************************************************************************
//*****************************************************************************
//
// Copyright (c) 2017, Ambiq Micro
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are met:
//
// 1. Redistributions of source code must retain the above copyright notice,
// this list of conditions and the following disclaimer.
//
// 2. Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the distribution.
//
// 3. Neither the name of the copyright holder nor the names of its
// contributors may be used to endorse or promote products derived from this
// software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
// POSSIBILITY OF SUCH DAMAGE.
//
// This is part of revision 1.2.11 of the AmbiqSuite Development Package.
//
//*****************************************************************************
#ifndef AM_REG_CLKGEN_H
#define AM_REG_CLKGEN_H
//*****************************************************************************
//
// Instance finder. (1 instance(s) available)
//
//*****************************************************************************
#define AM_REG_CLKGEN_NUM_MODULES 1
#define AM_REG_CLKGENn(n) \
(REG_CLKGEN_BASEADDR + 0x00000000 * n)
//*****************************************************************************
//
// Register offsets.
//
//*****************************************************************************
#define AM_REG_CLKGEN_CALXT_O 0x00000000
#define AM_REG_CLKGEN_CALRC_O 0x00000004
#define AM_REG_CLKGEN_ACALCTR_O 0x00000008
#define AM_REG_CLKGEN_OCTRL_O 0x0000000C
#define AM_REG_CLKGEN_CLKOUT_O 0x00000010
#define AM_REG_CLKGEN_CCTRL_O 0x00000018
#define AM_REG_CLKGEN_STATUS_O 0x0000001C
#define AM_REG_CLKGEN_HFADJ_O 0x00000020
#define AM_REG_CLKGEN_CLOCKEN_O 0x00000028
#define AM_REG_CLKGEN_CLOCKEN2_O 0x0000002C
#define AM_REG_CLKGEN_CLOCKEN3_O 0x00000030
#define AM_REG_CLKGEN_UARTEN_O 0x00000034
#define AM_REG_CLKGEN_CLKKEY_O 0x00000014
#define AM_REG_CLKGEN_INTEN_O 0x00000100
#define AM_REG_CLKGEN_INTSTAT_O 0x00000104
#define AM_REG_CLKGEN_INTCLR_O 0x00000108
#define AM_REG_CLKGEN_INTSET_O 0x0000010C
//*****************************************************************************
//
// Key values.
//
//*****************************************************************************
#define AM_REG_CLKGEN_CLKKEY_KEYVAL 0x00000047
//*****************************************************************************
//
// CLKGEN_INTEN - CLKGEN Interrupt Register: Enable
//
//*****************************************************************************
// RTC Alarm interrupt
#define AM_REG_CLKGEN_INTEN_ALM_S 3
#define AM_REG_CLKGEN_INTEN_ALM_M 0x00000008
#define AM_REG_CLKGEN_INTEN_ALM(n) (((uint32_t)(n) << 3) & 0x00000008)
// XT Oscillator Fail interrupt
#define AM_REG_CLKGEN_INTEN_OF_S 2
#define AM_REG_CLKGEN_INTEN_OF_M 0x00000004
#define AM_REG_CLKGEN_INTEN_OF(n) (((uint32_t)(n) << 2) & 0x00000004)
// Autocalibration Complete interrupt
#define AM_REG_CLKGEN_INTEN_ACC_S 1
#define AM_REG_CLKGEN_INTEN_ACC_M 0x00000002
#define AM_REG_CLKGEN_INTEN_ACC(n) (((uint32_t)(n) << 1) & 0x00000002)
// Autocalibration Fail interrupt
#define AM_REG_CLKGEN_INTEN_ACF_S 0
#define AM_REG_CLKGEN_INTEN_ACF_M 0x00000001
#define AM_REG_CLKGEN_INTEN_ACF(n) (((uint32_t)(n) << 0) & 0x00000001)
//*****************************************************************************
//
// CLKGEN_INTSTAT - CLKGEN Interrupt Register: Status
//
//*****************************************************************************
// RTC Alarm interrupt
#define AM_REG_CLKGEN_INTSTAT_ALM_S 3
#define AM_REG_CLKGEN_INTSTAT_ALM_M 0x00000008
#define AM_REG_CLKGEN_INTSTAT_ALM(n) (((uint32_t)(n) << 3) & 0x00000008)
// XT Oscillator Fail interrupt
#define AM_REG_CLKGEN_INTSTAT_OF_S 2
#define AM_REG_CLKGEN_INTSTAT_OF_M 0x00000004
#define AM_REG_CLKGEN_INTSTAT_OF(n) (((uint32_t)(n) << 2) & 0x00000004)
// Autocalibration Complete interrupt
#define AM_REG_CLKGEN_INTSTAT_ACC_S 1
#define AM_REG_CLKGEN_INTSTAT_ACC_M 0x00000002
#define AM_REG_CLKGEN_INTSTAT_ACC(n) (((uint32_t)(n) << 1) & 0x00000002)
// Autocalibration Fail interrupt
#define AM_REG_CLKGEN_INTSTAT_ACF_S 0
#define AM_REG_CLKGEN_INTSTAT_ACF_M 0x00000001
#define AM_REG_CLKGEN_INTSTAT_ACF(n) (((uint32_t)(n) << 0) & 0x00000001)
//*****************************************************************************
//
// CLKGEN_INTCLR - CLKGEN Interrupt Register: Clear
//
//*****************************************************************************
// RTC Alarm interrupt
#define AM_REG_CLKGEN_INTCLR_ALM_S 3
#define AM_REG_CLKGEN_INTCLR_ALM_M 0x00000008
#define AM_REG_CLKGEN_INTCLR_ALM(n) (((uint32_t)(n) << 3) & 0x00000008)
// XT Oscillator Fail interrupt
#define AM_REG_CLKGEN_INTCLR_OF_S 2
#define AM_REG_CLKGEN_INTCLR_OF_M 0x00000004
#define AM_REG_CLKGEN_INTCLR_OF(n) (((uint32_t)(n) << 2) & 0x00000004)
// Autocalibration Complete interrupt
#define AM_REG_CLKGEN_INTCLR_ACC_S 1
#define AM_REG_CLKGEN_INTCLR_ACC_M 0x00000002
#define AM_REG_CLKGEN_INTCLR_ACC(n) (((uint32_t)(n) << 1) & 0x00000002)
// Autocalibration Fail interrupt
#define AM_REG_CLKGEN_INTCLR_ACF_S 0
#define AM_REG_CLKGEN_INTCLR_ACF_M 0x00000001
#define AM_REG_CLKGEN_INTCLR_ACF(n) (((uint32_t)(n) << 0) & 0x00000001)
//*****************************************************************************
//
// CLKGEN_INTSET - CLKGEN Interrupt Register: Set
//
//*****************************************************************************
// RTC Alarm interrupt
#define AM_REG_CLKGEN_INTSET_ALM_S 3
#define AM_REG_CLKGEN_INTSET_ALM_M 0x00000008
#define AM_REG_CLKGEN_INTSET_ALM(n) (((uint32_t)(n) << 3) & 0x00000008)
// XT Oscillator Fail interrupt
#define AM_REG_CLKGEN_INTSET_OF_S 2
#define AM_REG_CLKGEN_INTSET_OF_M 0x00000004
#define AM_REG_CLKGEN_INTSET_OF(n) (((uint32_t)(n) << 2) & 0x00000004)
// Autocalibration Complete interrupt
#define AM_REG_CLKGEN_INTSET_ACC_S 1
#define AM_REG_CLKGEN_INTSET_ACC_M 0x00000002
#define AM_REG_CLKGEN_INTSET_ACC(n) (((uint32_t)(n) << 1) & 0x00000002)
// Autocalibration Fail interrupt
#define AM_REG_CLKGEN_INTSET_ACF_S 0
#define AM_REG_CLKGEN_INTSET_ACF_M 0x00000001
#define AM_REG_CLKGEN_INTSET_ACF(n) (((uint32_t)(n) << 0) & 0x00000001)
//*****************************************************************************
//
// CLKGEN_CALXT - XT Oscillator Control
//
//*****************************************************************************
// XT Oscillator calibration value
#define AM_REG_CLKGEN_CALXT_CALXT_S 0
#define AM_REG_CLKGEN_CALXT_CALXT_M 0x000007FF
#define AM_REG_CLKGEN_CALXT_CALXT(n) (((uint32_t)(n) << 0) & 0x000007FF)
//*****************************************************************************
//
// CLKGEN_CALRC - RC Oscillator Control
//
//*****************************************************************************
// LFRC Oscillator calibration value
#define AM_REG_CLKGEN_CALRC_CALRC_S 0
#define AM_REG_CLKGEN_CALRC_CALRC_M 0x0003FFFF
#define AM_REG_CLKGEN_CALRC_CALRC(n) (((uint32_t)(n) << 0) & 0x0003FFFF)
//*****************************************************************************
//
// CLKGEN_ACALCTR - Autocalibration Counter
//
//*****************************************************************************
// Autocalibration Counter result.
#define AM_REG_CLKGEN_ACALCTR_ACALCTR_S 0
#define AM_REG_CLKGEN_ACALCTR_ACALCTR_M 0x00FFFFFF
#define AM_REG_CLKGEN_ACALCTR_ACALCTR(n) (((uint32_t)(n) << 0) & 0x00FFFFFF)
//*****************************************************************************
//
// CLKGEN_OCTRL - Oscillator Control
//
//*****************************************************************************
// Autocalibration control
#define AM_REG_CLKGEN_OCTRL_ACAL_S 8
#define AM_REG_CLKGEN_OCTRL_ACAL_M 0x00000700
#define AM_REG_CLKGEN_OCTRL_ACAL(n) (((uint32_t)(n) << 8) & 0x00000700)
#define AM_REG_CLKGEN_OCTRL_ACAL_DIS 0x00000000
#define AM_REG_CLKGEN_OCTRL_ACAL_1024SEC 0x00000200
#define AM_REG_CLKGEN_OCTRL_ACAL_512SEC 0x00000300
#define AM_REG_CLKGEN_OCTRL_ACAL_XTFREQ 0x00000600
#define AM_REG_CLKGEN_OCTRL_ACAL_EXTFREQ 0x00000700
// Selects the RTC oscillator (1 => LFRC, 0 => XT)
#define AM_REG_CLKGEN_OCTRL_OSEL_S 7
#define AM_REG_CLKGEN_OCTRL_OSEL_M 0x00000080
#define AM_REG_CLKGEN_OCTRL_OSEL(n) (((uint32_t)(n) << 7) & 0x00000080)
#define AM_REG_CLKGEN_OCTRL_OSEL_RTC_XT 0x00000000
#define AM_REG_CLKGEN_OCTRL_OSEL_RTC_LFRC 0x00000080
// Oscillator switch on failure function
#define AM_REG_CLKGEN_OCTRL_FOS_S 6
#define AM_REG_CLKGEN_OCTRL_FOS_M 0x00000040
#define AM_REG_CLKGEN_OCTRL_FOS(n) (((uint32_t)(n) << 6) & 0x00000040)
#define AM_REG_CLKGEN_OCTRL_FOS_DIS 0x00000000
#define AM_REG_CLKGEN_OCTRL_FOS_EN 0x00000040
// Stop the LFRC Oscillator to the RTC
#define AM_REG_CLKGEN_OCTRL_STOPRC_S 1
#define AM_REG_CLKGEN_OCTRL_STOPRC_M 0x00000002
#define AM_REG_CLKGEN_OCTRL_STOPRC(n) (((uint32_t)(n) << 1) & 0x00000002)
#define AM_REG_CLKGEN_OCTRL_STOPRC_EN 0x00000000
#define AM_REG_CLKGEN_OCTRL_STOPRC_STOP 0x00000002
// Stop the XT Oscillator to the RTC
#define AM_REG_CLKGEN_OCTRL_STOPXT_S 0
#define AM_REG_CLKGEN_OCTRL_STOPXT_M 0x00000001
#define AM_REG_CLKGEN_OCTRL_STOPXT(n) (((uint32_t)(n) << 0) & 0x00000001)
#define AM_REG_CLKGEN_OCTRL_STOPXT_EN 0x00000000
#define AM_REG_CLKGEN_OCTRL_STOPXT_STOP 0x00000001
//*****************************************************************************
//
// CLKGEN_CLKOUT - CLKOUT Frequency Select
//
//*****************************************************************************
// Enable the CLKOUT signal
#define AM_REG_CLKGEN_CLKOUT_CKEN_S 7
#define AM_REG_CLKGEN_CLKOUT_CKEN_M 0x00000080
#define AM_REG_CLKGEN_CLKOUT_CKEN(n) (((uint32_t)(n) << 7) & 0x00000080)
#define AM_REG_CLKGEN_CLKOUT_CKEN_DIS 0x00000000
#define AM_REG_CLKGEN_CLKOUT_CKEN_EN 0x00000080
// CLKOUT signal select. Note that HIGH_DRIVE should be selected if any high
// frequencies (such as from HFRC) are selected for CLKOUT.
#define AM_REG_CLKGEN_CLKOUT_CKSEL_S 0
#define AM_REG_CLKGEN_CLKOUT_CKSEL_M 0x0000003F
#define AM_REG_CLKGEN_CLKOUT_CKSEL(n) (((uint32_t)(n) << 0) & 0x0000003F)
#define AM_REG_CLKGEN_CLKOUT_CKSEL_LFRC 0x00000000
#define AM_REG_CLKGEN_CLKOUT_CKSEL_XT_DIV2 0x00000001
#define AM_REG_CLKGEN_CLKOUT_CKSEL_XT_DIV4 0x00000002
#define AM_REG_CLKGEN_CLKOUT_CKSEL_XT_DIV8 0x00000003
#define AM_REG_CLKGEN_CLKOUT_CKSEL_XT_DIV16 0x00000004
#define AM_REG_CLKGEN_CLKOUT_CKSEL_XT_DIV32 0x00000005
#define AM_REG_CLKGEN_CLKOUT_CKSEL_RTC_1Hz 0x00000010
#define AM_REG_CLKGEN_CLKOUT_CKSEL_XT_DIV2M 0x00000016
#define AM_REG_CLKGEN_CLKOUT_CKSEL_XT 0x00000017
#define AM_REG_CLKGEN_CLKOUT_CKSEL_CG_100Hz 0x00000018
#define AM_REG_CLKGEN_CLKOUT_CKSEL_HFRC 0x00000019
#define AM_REG_CLKGEN_CLKOUT_CKSEL_HFRC_DIV4 0x0000001A
#define AM_REG_CLKGEN_CLKOUT_CKSEL_HFRC_DIV8 0x0000001B
#define AM_REG_CLKGEN_CLKOUT_CKSEL_HFRC_DIV16 0x0000001C
#define AM_REG_CLKGEN_CLKOUT_CKSEL_HFRC_DIV64 0x0000001D
#define AM_REG_CLKGEN_CLKOUT_CKSEL_HFRC_DIV128 0x0000001E
#define AM_REG_CLKGEN_CLKOUT_CKSEL_HFRC_DIV256 0x0000001F
#define AM_REG_CLKGEN_CLKOUT_CKSEL_HFRC_DIV512 0x00000020
#define AM_REG_CLKGEN_CLKOUT_CKSEL_FLASH_CLK 0x00000022
#define AM_REG_CLKGEN_CLKOUT_CKSEL_LFRC_DIV2 0x00000023
#define AM_REG_CLKGEN_CLKOUT_CKSEL_LFRC_DIV32 0x00000024
#define AM_REG_CLKGEN_CLKOUT_CKSEL_LFRC_DIV512 0x00000025
#define AM_REG_CLKGEN_CLKOUT_CKSEL_LFRC_DIV32K 0x00000026
#define AM_REG_CLKGEN_CLKOUT_CKSEL_XT_DIV256 0x00000027
#define AM_REG_CLKGEN_CLKOUT_CKSEL_XT_DIV8K 0x00000028
#define AM_REG_CLKGEN_CLKOUT_CKSEL_XT_DIV64K 0x00000029
#define AM_REG_CLKGEN_CLKOUT_CKSEL_ULFRC_DIV16 0x0000002A
#define AM_REG_CLKGEN_CLKOUT_CKSEL_ULFRC_DIV128 0x0000002B
#define AM_REG_CLKGEN_CLKOUT_CKSEL_ULFRC_1Hz 0x0000002C
#define AM_REG_CLKGEN_CLKOUT_CKSEL_ULFRC_DIV4K 0x0000002D
#define AM_REG_CLKGEN_CLKOUT_CKSEL_ULFRC_DIV1M 0x0000002E
#define AM_REG_CLKGEN_CLKOUT_CKSEL_HFRC_DIV64K 0x0000002F
#define AM_REG_CLKGEN_CLKOUT_CKSEL_HFRC_DIV16M 0x00000030
#define AM_REG_CLKGEN_CLKOUT_CKSEL_LFRC_DIV2M 0x00000031
#define AM_REG_CLKGEN_CLKOUT_CKSEL_HFRCNE 0x00000032
#define AM_REG_CLKGEN_CLKOUT_CKSEL_HFRCNE_DIV8 0x00000033
#define AM_REG_CLKGEN_CLKOUT_CKSEL_XTNE 0x00000035
#define AM_REG_CLKGEN_CLKOUT_CKSEL_XTNE_DIV16 0x00000036
#define AM_REG_CLKGEN_CLKOUT_CKSEL_LFRCNE_DIV32 0x00000037
#define AM_REG_CLKGEN_CLKOUT_CKSEL_LFRCNE 0x00000039
//*****************************************************************************
//
// CLKGEN_CCTRL - HFRC Clock Control
//
//*****************************************************************************
// Core Clock divisor
#define AM_REG_CLKGEN_CCTRL_CORESEL_S 0
#define AM_REG_CLKGEN_CCTRL_CORESEL_M 0x00000001
#define AM_REG_CLKGEN_CCTRL_CORESEL(n) (((uint32_t)(n) << 0) & 0x00000001)
#define AM_REG_CLKGEN_CCTRL_CORESEL_HFRC 0x00000000
#define AM_REG_CLKGEN_CCTRL_CORESEL_HFRC_DIV2 0x00000001
//*****************************************************************************
//
// CLKGEN_STATUS - Clock Generator Status
//
//*****************************************************************************
// XT Oscillator is enabled but not oscillating
#define AM_REG_CLKGEN_STATUS_OSCF_S 1
#define AM_REG_CLKGEN_STATUS_OSCF_M 0x00000002
#define AM_REG_CLKGEN_STATUS_OSCF(n) (((uint32_t)(n) << 1) & 0x00000002)
// Current RTC oscillator (1 => LFRC, 0 => XT)
#define AM_REG_CLKGEN_STATUS_OMODE_S 0
#define AM_REG_CLKGEN_STATUS_OMODE_M 0x00000001
#define AM_REG_CLKGEN_STATUS_OMODE(n) (((uint32_t)(n) << 0) & 0x00000001)
//*****************************************************************************
//
// CLKGEN_HFADJ - HFRC Adjustment
//
//*****************************************************************************
// Gain control for HFRC adjustment
#define AM_REG_CLKGEN_HFADJ_HFADJ_GAIN_S 21
#define AM_REG_CLKGEN_HFADJ_HFADJ_GAIN_M 0x00E00000
#define AM_REG_CLKGEN_HFADJ_HFADJ_GAIN(n) (((uint32_t)(n) << 21) & 0x00E00000)
#define AM_REG_CLKGEN_HFADJ_HFADJ_GAIN_Gain_of_1 0x00000000
#define AM_REG_CLKGEN_HFADJ_HFADJ_GAIN_Gain_of_1_in_2 0x00200000
#define AM_REG_CLKGEN_HFADJ_HFADJ_GAIN_Gain_of_1_in_4 0x00400000
#define AM_REG_CLKGEN_HFADJ_HFADJ_GAIN_Gain_of_1_in_8 0x00600000
#define AM_REG_CLKGEN_HFADJ_HFADJ_GAIN_Gain_of_1_in_16 0x00800000
#define AM_REG_CLKGEN_HFADJ_HFADJ_GAIN_Gain_of_1_in_32 0x00A00000
// XT warmup period for HFRC adjustment
#define AM_REG_CLKGEN_HFADJ_HFWARMUP_S 20
#define AM_REG_CLKGEN_HFADJ_HFWARMUP_M 0x00100000
#define AM_REG_CLKGEN_HFADJ_HFWARMUP(n) (((uint32_t)(n) << 20) & 0x00100000)
#define AM_REG_CLKGEN_HFADJ_HFWARMUP_1SEC 0x00000000
#define AM_REG_CLKGEN_HFADJ_HFWARMUP_2SEC 0x00100000
// Target HFRC adjustment value.
#define AM_REG_CLKGEN_HFADJ_HFXTADJ_S 8
#define AM_REG_CLKGEN_HFADJ_HFXTADJ_M 0x000FFF00
#define AM_REG_CLKGEN_HFADJ_HFXTADJ(n) (((uint32_t)(n) << 8) & 0x000FFF00)
// Repeat period for HFRC adjustment
#define AM_REG_CLKGEN_HFADJ_HFADJCK_S 1
#define AM_REG_CLKGEN_HFADJ_HFADJCK_M 0x0000000E
#define AM_REG_CLKGEN_HFADJ_HFADJCK(n) (((uint32_t)(n) << 1) & 0x0000000E)
#define AM_REG_CLKGEN_HFADJ_HFADJCK_4SEC 0x00000000
#define AM_REG_CLKGEN_HFADJ_HFADJCK_16SEC 0x00000002
#define AM_REG_CLKGEN_HFADJ_HFADJCK_32SEC 0x00000004
#define AM_REG_CLKGEN_HFADJ_HFADJCK_64SEC 0x00000006
#define AM_REG_CLKGEN_HFADJ_HFADJCK_128SEC 0x00000008
#define AM_REG_CLKGEN_HFADJ_HFADJCK_256SEC 0x0000000A
#define AM_REG_CLKGEN_HFADJ_HFADJCK_512SEC 0x0000000C
#define AM_REG_CLKGEN_HFADJ_HFADJCK_1024SEC 0x0000000E
// HFRC adjustment control
#define AM_REG_CLKGEN_HFADJ_HFADJEN_S 0
#define AM_REG_CLKGEN_HFADJ_HFADJEN_M 0x00000001
#define AM_REG_CLKGEN_HFADJ_HFADJEN(n) (((uint32_t)(n) << 0) & 0x00000001)
#define AM_REG_CLKGEN_HFADJ_HFADJEN_DIS 0x00000000
#define AM_REG_CLKGEN_HFADJ_HFADJEN_EN 0x00000001
//*****************************************************************************
//
// CLKGEN_CLOCKEN - Clock Enable Status
//
//*****************************************************************************
// Clock enable status
#define AM_REG_CLKGEN_CLOCKEN_CLOCKEN_S 0
#define AM_REG_CLKGEN_CLOCKEN_CLOCKEN_M 0xFFFFFFFF
#define AM_REG_CLKGEN_CLOCKEN_CLOCKEN(n) (((uint32_t)(n) << 0) & 0xFFFFFFFF)
#define AM_REG_CLKGEN_CLOCKEN_CLOCKEN_ADC_CLKEN 0x00000001
#define AM_REG_CLKGEN_CLOCKEN_CLOCKEN_CTIMER_CLKEN 0x00000002
#define AM_REG_CLKGEN_CLOCKEN_CLOCKEN_CTIMER0A_CLKEN 0x00000004
#define AM_REG_CLKGEN_CLOCKEN_CLOCKEN_CTIMER0B_CLKEN 0x00000008
#define AM_REG_CLKGEN_CLOCKEN_CLOCKEN_CTIMER1A_CLKEN 0x00000010
#define AM_REG_CLKGEN_CLOCKEN_CLOCKEN_CTIMER1B_CLKEN 0x00000020
#define AM_REG_CLKGEN_CLOCKEN_CLOCKEN_CTIMER2A_CLKEN 0x00000040
#define AM_REG_CLKGEN_CLOCKEN_CLOCKEN_CTIMER2B_CLKEN 0x00000080
#define AM_REG_CLKGEN_CLOCKEN_CLOCKEN_CTIMER3A_CLKEN 0x00000100
#define AM_REG_CLKGEN_CLOCKEN_CLOCKEN_CTIMER3B_CLKEN 0x00000200
#define AM_REG_CLKGEN_CLOCKEN_CLOCKEN_IOMSTR0_CLKEN 0x00000400
#define AM_REG_CLKGEN_CLOCKEN_CLOCKEN_IOMSTR1_CLKEN 0x00000800
#define AM_REG_CLKGEN_CLOCKEN_CLOCKEN_IOMSTR2_CLKEN 0x00001000
#define AM_REG_CLKGEN_CLOCKEN_CLOCKEN_IOMSTR3_CLKEN 0x00002000
#define AM_REG_CLKGEN_CLOCKEN_CLOCKEN_IOMSTR4_CLKEN 0x00004000
#define AM_REG_CLKGEN_CLOCKEN_CLOCKEN_IOMSTR5_CLKEN 0x00008000
#define AM_REG_CLKGEN_CLOCKEN_CLOCKEN_IOMSTRIFC0_CLKEN 0x00010000
#define AM_REG_CLKGEN_CLOCKEN_CLOCKEN_IOMSTRIFC1_CLKEN 0x00020000
#define AM_REG_CLKGEN_CLOCKEN_CLOCKEN_IOMSTRIFC2_CLKEN 0x00040000
#define AM_REG_CLKGEN_CLOCKEN_CLOCKEN_IOMSTRIFC3_CLKEN 0x00080000
#define AM_REG_CLKGEN_CLOCKEN_CLOCKEN_IOMSTRIFC4_CLKEN 0x00100000
#define AM_REG_CLKGEN_CLOCKEN_CLOCKEN_IOMSTRIFC5_CLKEN 0x00200000
#define AM_REG_CLKGEN_CLOCKEN_CLOCKEN_IOSLAVE_CLKEN 0x00400000
#define AM_REG_CLKGEN_CLOCKEN_CLOCKEN_PDM_CLKEN 0x00800000
#define AM_REG_CLKGEN_CLOCKEN_CLOCKEN_PDMIFC_CLKEN 0x01000000
#define AM_REG_CLKGEN_CLOCKEN_CLOCKEN_RSTGEN_CLKEN 0x02000000
#define AM_REG_CLKGEN_CLOCKEN_CLOCKEN_SRAM_WIPE_CLKEN 0x04000000
#define AM_REG_CLKGEN_CLOCKEN_CLOCKEN_STIMER_CLKEN 0x08000000
#define AM_REG_CLKGEN_CLOCKEN_CLOCKEN_STIMER_CNT_CLKEN 0x10000000
#define AM_REG_CLKGEN_CLOCKEN_CLOCKEN_TPIU_CLKEN 0x20000000
#define AM_REG_CLKGEN_CLOCKEN_CLOCKEN_UART0_HCLK_CLKEN 0x40000000
#define AM_REG_CLKGEN_CLOCKEN_CLOCKEN_UART0HF_CLKEN 0x80000000
//*****************************************************************************
//
// CLKGEN_CLOCKEN2 - Clock Enable Status
//
//*****************************************************************************
// Clock enable status 2
#define AM_REG_CLKGEN_CLOCKEN2_CLOCKEN2_S 0
#define AM_REG_CLKGEN_CLOCKEN2_CLOCKEN2_M 0xFFFFFFFF
#define AM_REG_CLKGEN_CLOCKEN2_CLOCKEN2(n) (((uint32_t)(n) << 0) & 0xFFFFFFFF)
#define AM_REG_CLKGEN_CLOCKEN2_CLOCKEN2_UART1_HCLK_CLKEN 0x00000001
#define AM_REG_CLKGEN_CLOCKEN2_CLOCKEN2_UART1HF_CLKEN 0x00000002
#define AM_REG_CLKGEN_CLOCKEN2_CLOCKEN2_WDT_CLKEN 0x00000004
#define AM_REG_CLKGEN_CLOCKEN2_CLOCKEN2_XT_32KHz_EN 0x40000000
#define AM_REG_CLKGEN_CLOCKEN2_CLOCKEN2_FRCHFRC 0x80000000
//*****************************************************************************
//
// CLKGEN_CLOCKEN3 - Clock Enable Status
//
//*****************************************************************************
// Clock enable status 3
#define AM_REG_CLKGEN_CLOCKEN3_CLOCKEN3_S 0
#define AM_REG_CLKGEN_CLOCKEN3_CLOCKEN3_M 0xFFFFFFFF
#define AM_REG_CLKGEN_CLOCKEN3_CLOCKEN3(n) (((uint32_t)(n) << 0) & 0xFFFFFFFF)
#define AM_REG_CLKGEN_CLOCKEN3_CLOCKEN3_periph_all_xtal_en 0x01000000
#define AM_REG_CLKGEN_CLOCKEN3_CLOCKEN3_periph_all_hfrc_en 0x02000000
#define AM_REG_CLKGEN_CLOCKEN3_CLOCKEN3_HFADJEN 0x04000000
#define AM_REG_CLKGEN_CLOCKEN3_CLOCKEN3_HFRC_en_out 0x08000000
#define AM_REG_CLKGEN_CLOCKEN3_CLOCKEN3_RTC_SOURCE 0x10000000
#define AM_REG_CLKGEN_CLOCKEN3_CLOCKEN3_XTAL_EN 0x20000000
#define AM_REG_CLKGEN_CLOCKEN3_CLOCKEN3_HFRC_EN 0x40000000
#define AM_REG_CLKGEN_CLOCKEN3_CLOCKEN3_FLASHCLK_EN 0x80000000
//*****************************************************************************
//
// CLKGEN_UARTEN - UART Enable
//
//*****************************************************************************
// UART1 system clock control
#define AM_REG_CLKGEN_UARTEN_UART1EN_S 8
#define AM_REG_CLKGEN_UARTEN_UART1EN_M 0x00000300
#define AM_REG_CLKGEN_UARTEN_UART1EN(n) (((uint32_t)(n) << 8) & 0x00000300)
#define AM_REG_CLKGEN_UARTEN_UART1EN_DIS 0x00000000
#define AM_REG_CLKGEN_UARTEN_UART1EN_EN 0x00000100
#define AM_REG_CLKGEN_UARTEN_UART1EN_REDUCE_FREQ 0x00000200
#define AM_REG_CLKGEN_UARTEN_UART1EN_EN_POWER_SAV 0x00000300
// UART0 system clock control
#define AM_REG_CLKGEN_UARTEN_UART0EN_S 0
#define AM_REG_CLKGEN_UARTEN_UART0EN_M 0x00000003
#define AM_REG_CLKGEN_UARTEN_UART0EN(n) (((uint32_t)(n) << 0) & 0x00000003)
#define AM_REG_CLKGEN_UARTEN_UART0EN_DIS 0x00000000
#define AM_REG_CLKGEN_UARTEN_UART0EN_EN 0x00000001
#define AM_REG_CLKGEN_UARTEN_UART0EN_REDUCE_FREQ 0x00000002
#define AM_REG_CLKGEN_UARTEN_UART0EN_EN_POWER_SAV 0x00000003
#endif // AM_REG_CLKGEN_H