612 lines
25 KiB
C
612 lines
25 KiB
C
//*****************************************************************************
|
|
//
|
|
// am_hal_iom.h
|
|
//! @file
|
|
//!
|
|
//! @brief Functions for accessing and configuring the IO Master module
|
|
//!
|
|
//! @addtogroup iom2 IO Master (SPI/I2C)
|
|
//! @ingroup apollo2hal
|
|
//! @{
|
|
|
|
//*****************************************************************************
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Copyright (c) 2017, Ambiq Micro
|
|
// All rights reserved.
|
|
//
|
|
// Redistribution and use in source and binary forms, with or without
|
|
// modification, are permitted provided that the following conditions are met:
|
|
//
|
|
// 1. Redistributions of source code must retain the above copyright notice,
|
|
// this list of conditions and the following disclaimer.
|
|
//
|
|
// 2. Redistributions in binary form must reproduce the above copyright
|
|
// notice, this list of conditions and the following disclaimer in the
|
|
// documentation and/or other materials provided with the distribution.
|
|
//
|
|
// 3. Neither the name of the copyright holder nor the names of its
|
|
// contributors may be used to endorse or promote products derived from this
|
|
// software without specific prior written permission.
|
|
//
|
|
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
|
|
// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
// POSSIBILITY OF SUCH DAMAGE.
|
|
//
|
|
// This is part of revision 1.2.11 of the AmbiqSuite Development Package.
|
|
//
|
|
//*****************************************************************************
|
|
|
|
#ifndef AM_HAL_IOM_H
|
|
#define AM_HAL_IOM_H
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Macro definitions
|
|
//
|
|
//*****************************************************************************
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @name IOM Clock Frequencies
|
|
//! @brief Macro definitions for common SPI and I2C clock frequencies.
|
|
//!
|
|
//! These macros may be used with the ui32ClockFrequency member of the
|
|
//! am_hal_iom_config_t structure to set the clock frequency of the serial
|
|
//! interfaces.
|
|
//!
|
|
//! This list of frequencies is not exhaustive by any means. If your desired
|
|
//! frequency is not in this list, simply set ui32ClockFrequency to the
|
|
//! desired frequency (in Hz) when calling am_hal_iom_config().
|
|
//
|
|
//*****************************************************************************
|
|
#define AM_HAL_IOM_24MHZ 24000000
|
|
#define AM_HAL_IOM_16MHZ 16000000
|
|
#define AM_HAL_IOM_12MHZ 12000000
|
|
#define AM_HAL_IOM_8MHZ 8000000
|
|
#define AM_HAL_IOM_6MHZ 6000000
|
|
#define AM_HAL_IOM_4MHZ 4000000
|
|
#define AM_HAL_IOM_3MHZ 3000000
|
|
#define AM_HAL_IOM_2MHZ 2000000
|
|
#define AM_HAL_IOM_1_5MHZ 1500000
|
|
#define AM_HAL_IOM_1MHZ 1000000
|
|
#define AM_HAL_IOM_800KHZ 800000
|
|
#define AM_HAL_IOM_750KHZ 750000
|
|
#define AM_HAL_IOM_500KHZ 500000
|
|
#define AM_HAL_IOM_400KHZ 400000
|
|
#define AM_HAL_IOM_375KHZ 375000
|
|
#define AM_HAL_IOM_250KHZ 250000
|
|
#define AM_HAL_IOM_200KHZ 200000
|
|
#define AM_HAL_IOM_125KHZ 125000
|
|
#define AM_HAL_IOM_100KHZ 100000
|
|
#define AM_HAL_IOM_50KHZ 50000
|
|
#define AM_HAL_IOM_10KHZ 10000
|
|
|
|
// Hardware FIFO Size
|
|
#define AM_HAL_IOM_MAX_FIFO_SIZE 128
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @name IOM Physical Protocols
|
|
//! @brief Macro Definitions for general IOM configuration.
|
|
//!
|
|
//! These macros may be used with the am_hal_iom_config_t structure to set the
|
|
//! operating parameters of each serial IO master module. Choose SPIMODE to
|
|
//! select the SPI interface, or I2CMODE to select the I2C interface.
|
|
//!
|
|
//! @{
|
|
//
|
|
//*****************************************************************************
|
|
#define AM_HAL_IOM_SPIMODE AM_REG_IOMSTR_CFG_IFCSEL(1)
|
|
#define AM_HAL_IOM_I2CMODE AM_REG_IOMSTR_CFG_IFCSEL(0)
|
|
//! @}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @name IOM Operations
|
|
//! @brief Macro definitions used for ui32Operation parameters.
|
|
//!
|
|
//! These macros may be used to specify which action an IOM command will
|
|
//! execute. The 'OFFSET' operations will cause the IOM hardware to transmit the
|
|
//! provided 1-byte 'offset' before executing the rest of the command.
|
|
//!
|
|
//! @{
|
|
//
|
|
//*****************************************************************************
|
|
#define AM_HAL_IOM_WRITE 0x00000000
|
|
#define AM_HAL_IOM_READ 0x80000000
|
|
//! @}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @name Command Options
|
|
//! @brief Macro definitions used for ui32Options parameters.
|
|
//!
|
|
//! These macros are all related to SPI or I2C command words. They can be used
|
|
//! to set specific options on a per-transaction basis.
|
|
//!
|
|
//! - CS_LOW - Do not raise the CS signal at the end of this SPI command.
|
|
//! - NO_STOP - Do not release the I2C bus with a STOP bit after this command.
|
|
//! - LSB_FIRST - Reverse the payload bits of this command.
|
|
//! - 10BIT_ADDRESS - (I2C only) use a 10-bit I2C address protocol.
|
|
//! - RAW - Don't use an offset byte.
|
|
//! - OFFSET() - Send this 1-byte offset as the first byte of the transaction.
|
|
//! This can be used to access "registers" in external I2C devices, or add a
|
|
//! 1-byte write to the beginning of a SPI write or read command. See
|
|
//! "normal mode" operation in the I2C/SPI Master section of the datasheet
|
|
//! for more information on this parameter.
|
|
//!
|
|
//! @{
|
|
//
|
|
//*****************************************************************************
|
|
#define AM_HAL_IOM_CS_LOW 0x10000000
|
|
#define AM_HAL_IOM_NO_STOP 0x10000000
|
|
#define AM_HAL_IOM_LSB_FIRST 0x08000000
|
|
#define AM_HAL_IOM_10BIT_ADDRESS 0x04000000
|
|
#define AM_HAL_IOM_RAW 0x40000000
|
|
#define AM_HAL_IOM_OFFSET(n) (((n) << 8) & 0x0000FF00)
|
|
//! @}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @name IOM Interrupts
|
|
//! @brief Macro definitions for IOM interrupt status bits.
|
|
//!
|
|
//! These macros correspond to the bits in the IOM interrupt status register.
|
|
//! They may be used with any of the \e am_hal_iom_int_x() functions.
|
|
//!
|
|
//! @{
|
|
//
|
|
//*****************************************************************************
|
|
#define AM_HAL_IOM_INT_ARB AM_REG_IOMSTR_INTEN_ARB_M
|
|
#define AM_HAL_IOM_INT_STOP AM_REG_IOMSTR_INTEN_STOP_M
|
|
#define AM_HAL_IOM_INT_START AM_REG_IOMSTR_INTEN_START_M
|
|
#define AM_HAL_IOM_INT_ICMD AM_REG_IOMSTR_INTEN_ICMD_M
|
|
#define AM_HAL_IOM_INT_IACC AM_REG_IOMSTR_INTEN_IACC_M
|
|
#define AM_HAL_IOM_INT_WTLEN AM_REG_IOMSTR_INTEN_WTLEN_M
|
|
#define AM_HAL_IOM_INT_NAK AM_REG_IOMSTR_INTEN_NAK_M
|
|
#define AM_HAL_IOM_INT_FOVFL AM_REG_IOMSTR_INTEN_FOVFL_M
|
|
#define AM_HAL_IOM_INT_FUNDFL AM_REG_IOMSTR_INTEN_FUNDFL_M
|
|
#define AM_HAL_IOM_INT_THR AM_REG_IOMSTR_INTEN_THR_M
|
|
#define AM_HAL_IOM_INT_CMDCMP AM_REG_IOMSTR_INTEN_CMDCMP_M
|
|
|
|
#define AM_HAL_IOM_INT_ALL ( \
|
|
AM_HAL_IOM_INT_ARB | \
|
|
AM_HAL_IOM_INT_STOP | \
|
|
AM_HAL_IOM_INT_START | \
|
|
AM_HAL_IOM_INT_ICMD | \
|
|
AM_HAL_IOM_INT_IACC | \
|
|
AM_HAL_IOM_INT_WTLEN | \
|
|
AM_HAL_IOM_INT_NAK | \
|
|
AM_HAL_IOM_INT_FOVFL | \
|
|
AM_HAL_IOM_INT_FUNDFL | \
|
|
AM_HAL_IOM_INT_THR | \
|
|
AM_HAL_IOM_INT_CMDCMP)
|
|
|
|
#define AM_HAL_IOM_INT_SWERR ( \
|
|
AM_HAL_IOM_INT_ICMD | \
|
|
AM_HAL_IOM_INT_FOVFL | \
|
|
AM_HAL_IOM_INT_FUNDFL | \
|
|
AM_HAL_IOM_INT_IACC)
|
|
|
|
#define AM_HAL_IOM_INT_I2CARBERR ( \
|
|
AM_HAL_IOM_INT_ARB | \
|
|
AM_HAL_IOM_INT_START | \
|
|
AM_HAL_IOM_INT_STOP)
|
|
//! @}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @name Software IOM modules
|
|
//! @brief Macro definitions for using the software I2C interface.
|
|
//!
|
|
//! Use this macro as the module number for standard IOM functions to emulate
|
|
//! them using the bit-banged i2c interface.
|
|
//!
|
|
//! @{
|
|
//
|
|
//*****************************************************************************
|
|
#define AM_HAL_IOM_I2CBB_MODULE AM_REG_IOMSTR_NUM_MODULES
|
|
//! @}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @name IOM Return Codes
|
|
//! @brief Enum definitions for defining return values for IOM APIs
|
|
//!
|
|
//! This enum defines possible values for non-void IOM APIs
|
|
//!
|
|
//! @{
|
|
//
|
|
//*****************************************************************************
|
|
typedef enum
|
|
{
|
|
AM_HAL_IOM_SUCCESS = 0,
|
|
AM_HAL_IOM_ERR_TIMEOUT,
|
|
AM_HAL_IOM_ERR_INVALID_MODULE,
|
|
AM_HAL_IOM_ERR_INVALID_PARAM,
|
|
AM_HAL_IOM_ERR_INVALID_CFG,
|
|
AM_HAL_IOM_ERR_INVALID_OPER,
|
|
AM_HAL_IOM_ERR_I2C_NAK,
|
|
AM_HAL_IOM_ERR_I2C_ARB,
|
|
AM_HAL_IOM_ERR_RESOURCE_ERR,
|
|
} am_hal_iom_status_e ;
|
|
|
|
//! @}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Union type for a word-aligned, byte-addressable array.
|
|
//!
|
|
//! This is a convenience macro that may be used to define byte-addressable
|
|
//! arrays with 32-bit alignment. This allows the programmer to define SPI or
|
|
//! I2C transactions as a series of 8-bit values, but also write them to the
|
|
//! IOM FIFO efficiently as a series of 32-bit values.
|
|
//!
|
|
//! Example usage:
|
|
//!
|
|
//! @code
|
|
//! //
|
|
//! // Declare a buffer array with at least 3-bytes worth of space.
|
|
//! //
|
|
//! am_hal_iom_buffer(3) sBuffer;
|
|
//!
|
|
//! //
|
|
//! // Populate the buffer with a 3-byte command.
|
|
//! //
|
|
//! sBuffer.bytes[0] = 's';
|
|
//! sBuffer.bytes[1] = 'p';
|
|
//! sBuffer.bytes[2] = 'i';
|
|
//!
|
|
//! //
|
|
//! // Send the buffer over the spi interface.
|
|
//! //
|
|
//! am_hal_iom_spi_write(psDevice, sBuffer.words, 3, 0);
|
|
//!
|
|
//! @endcode
|
|
//
|
|
//*****************************************************************************
|
|
#define am_hal_iom_buffer(A) \
|
|
union \
|
|
{ \
|
|
uint32_t words[(A + 3) >> 2]; \
|
|
uint8_t bytes[A]; \
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Configuration structure for the IO master module.
|
|
//
|
|
//*****************************************************************************
|
|
typedef struct
|
|
{
|
|
//
|
|
//! @brief Selects the physical protocol for the IO master module. Choose
|
|
//! either AM_HAL_IOM_SPIMODE or AM_HAL_IOM_I2CMODE.
|
|
//
|
|
uint32_t ui32InterfaceMode;
|
|
|
|
//
|
|
//! @brief Selects the output clock frequency for SPI or I2C mode. Choose
|
|
//! one of the AM_HAL_IOM_nMHZ or AM_HAL_IOM_nKHZ macros.
|
|
//
|
|
uint32_t ui32ClockFrequency;
|
|
|
|
//
|
|
//! Select the SPI clock phase (unused in I2C mode).
|
|
//
|
|
bool bSPHA;
|
|
|
|
//
|
|
//! Select the SPI clock polarity (unused in I2C mode).
|
|
//
|
|
bool bSPOL;
|
|
|
|
//
|
|
//! @brief Select the FIFO write threshold.
|
|
//!
|
|
//! The IOM controller will generate a processor interrupt when the number
|
|
//! of entries in the FIFO goes *below* this number.
|
|
//
|
|
uint8_t ui8WriteThreshold;
|
|
|
|
//
|
|
//! @brief Select the FIFO read threshold.
|
|
//!
|
|
//! The IOM controller will generate a processor interrupt when the number
|
|
//! of entries in the FIFO grows *larger* than this number.
|
|
//
|
|
uint8_t ui8ReadThreshold;
|
|
|
|
}
|
|
am_hal_iom_config_t;
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Configuration structure for an individual SPI device.
|
|
//
|
|
//*****************************************************************************
|
|
typedef struct
|
|
{
|
|
//
|
|
//! IOM module to use for communicating with this device.
|
|
//
|
|
uint32_t ui32Module;
|
|
|
|
//
|
|
//! Chip select signal that should be used for this device.
|
|
//
|
|
uint32_t ui32ChipSelect;
|
|
|
|
//
|
|
//! Additional options that will ALWAYS be ORed into the command word.
|
|
//
|
|
uint32_t ui32Options;
|
|
}
|
|
am_hal_iom_spi_device_t;
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Configuration structure for an individual I2C device.
|
|
//
|
|
//*****************************************************************************
|
|
typedef struct
|
|
{
|
|
//
|
|
//! IOM module to use for communicating with this device.
|
|
//
|
|
uint32_t ui32Module;
|
|
|
|
//
|
|
//! I2C address associated with this device.
|
|
//
|
|
uint32_t ui32BusAddress;
|
|
|
|
//
|
|
//! Additional options that will ALWAYS be ORed into the command word.
|
|
//
|
|
uint32_t ui32Options;
|
|
}
|
|
am_hal_iom_i2c_device_t;
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Typedef for non-blocking function callbacks.
|
|
//
|
|
//*****************************************************************************
|
|
typedef void (*am_hal_iom_callback_t)(void);
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Typedef for a function that waits until the IOM queue is empty.
|
|
//
|
|
//*****************************************************************************
|
|
typedef void (*am_hal_iom_queue_flush_t)(uint32_t);
|
|
|
|
extern am_hal_iom_queue_flush_t am_hal_iom_queue_flush;
|
|
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Operations
|
|
//
|
|
//*****************************************************************************
|
|
#define AM_HAL_IOM_QUEUE_SPI_WRITE 0
|
|
#define AM_HAL_IOM_QUEUE_SPI_READ 1
|
|
#define AM_HAL_IOM_QUEUE_I2C_WRITE 2
|
|
#define AM_HAL_IOM_QUEUE_I2C_READ 3
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Structure to hold IOM operations.
|
|
//
|
|
//*****************************************************************************
|
|
typedef struct
|
|
{
|
|
uint32_t ui32Operation;
|
|
uint32_t ui32Module;
|
|
uint32_t ui32ChipSelect;
|
|
uint32_t *pui32Data;
|
|
uint32_t ui32NumBytes;
|
|
uint32_t ui32Options;
|
|
am_hal_iom_callback_t pfnCallback;
|
|
}
|
|
am_hal_iom_queue_entry_t;
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Structure to hold IOM configuration during module power-down.
|
|
//
|
|
//*****************************************************************************
|
|
typedef struct
|
|
{
|
|
uint32_t FIFOTHR;
|
|
uint32_t CLKCFG;
|
|
uint32_t CFG;
|
|
uint32_t INTEN;
|
|
uint32_t bValid;
|
|
}
|
|
am_hal_iom_pwrsave_t;
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Global variables
|
|
//
|
|
//*****************************************************************************
|
|
extern am_hal_iom_pwrsave_t am_hal_iom_pwrsave[AM_REG_IOMSTR_NUM_MODULES];
|
|
|
|
#ifdef __cplusplus
|
|
extern "C"
|
|
{
|
|
#endif
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// External function definitions
|
|
//
|
|
//*****************************************************************************
|
|
extern void am_hal_iom_pwrctrl_enable(uint32_t ui32Module);
|
|
extern void am_hal_iom_pwrctrl_disable(uint32_t ui32Module);
|
|
extern void am_hal_iom_power_on_restore(uint32_t ui32Module);
|
|
extern void am_hal_iom_power_off_save(uint32_t ui32Module);
|
|
extern void am_hal_iom_config(uint32_t ui32Module,
|
|
const am_hal_iom_config_t *psConfig);
|
|
extern uint32_t am_hal_iom_frequency_get(uint32_t ui32Module);
|
|
extern void am_hal_iom_enable(uint32_t ui32Module);
|
|
extern void am_hal_iom_disable(uint32_t ui32Module);
|
|
extern am_hal_iom_status_e am_hal_iom_spi_write(uint32_t ui32Module, uint32_t ui32ChipSelect,
|
|
uint32_t *pui32Data, uint32_t ui32NumBytes,
|
|
uint32_t ui32Options);
|
|
extern am_hal_iom_status_e am_hal_iom_spi_read(uint32_t ui32Module, uint32_t ui32ChipSelect,
|
|
uint32_t *pui32Data, uint32_t ui32NumBytes,
|
|
uint32_t ui32Options);
|
|
extern am_hal_iom_status_e am_hal_iom_spi_fullduplex(uint32_t ui32Module, uint32_t ui32ChipSelect,
|
|
uint32_t *pui32TxData, uint32_t *pui32RxData,
|
|
uint32_t ui32NumBytes, uint32_t ui32Options);
|
|
|
|
extern am_hal_iom_status_e am_hal_iom_spi_write_nq(uint32_t ui32Module, uint32_t ui32ChipSelect,
|
|
uint32_t *pui32Data, uint32_t ui32NumBytes,
|
|
uint32_t ui32Options);
|
|
extern am_hal_iom_status_e am_hal_iom_spi_read_nq(uint32_t ui32Module, uint32_t ui32ChipSelect,
|
|
uint32_t *pui32Data, uint32_t ui32NumBytes,
|
|
uint32_t ui32Options);
|
|
extern am_hal_iom_status_e am_hal_iom_spi_fullduplex_nq(uint32_t ui32Module, uint32_t ui32ChipSelect,
|
|
uint32_t *pui32TxData, uint32_t *pui32RxData,
|
|
uint32_t ui32NumBytes, uint32_t ui32Options);
|
|
extern am_hal_iom_status_e am_hal_iom_spi_write_nb(uint32_t ui32Module, uint32_t ui32ChipSelect,
|
|
uint32_t *pui32Data, uint32_t ui32NumBytes,
|
|
uint32_t ui32Options,
|
|
am_hal_iom_callback_t pfnCallback);
|
|
extern am_hal_iom_status_e am_hal_iom_spi_read_nb(uint32_t ui32Module, uint32_t ui32ChipSelect,
|
|
uint32_t *pui32Data, uint32_t ui32NumBytes,
|
|
uint32_t ui32Options,
|
|
am_hal_iom_callback_t pfnCallback);
|
|
extern void am_hal_iom_spi_cmd_run(uint32_t ui32Operation,
|
|
uint32_t ui32Module,
|
|
uint32_t ui32ChipSelect,
|
|
uint32_t ui32NumBytes,
|
|
uint32_t ui32Options);
|
|
extern am_hal_iom_status_e am_hal_iom_i2c_write(uint32_t ui32Module,
|
|
uint32_t ui32BusAddress,
|
|
uint32_t *pui32Data,
|
|
uint32_t ui32NumBytes,
|
|
uint32_t ui32Options);
|
|
extern am_hal_iom_status_e am_hal_iom_i2c_read(uint32_t ui32Module,
|
|
uint32_t ui32BusAddress,
|
|
uint32_t *pui32Data,
|
|
uint32_t ui32NumBytes,
|
|
uint32_t ui32Options);
|
|
extern am_hal_iom_status_e am_hal_iom_i2c_write_nq(uint32_t ui32Module,
|
|
uint32_t ui32BusAddress,
|
|
uint32_t *pui32Data,
|
|
uint32_t ui32NumBytes,
|
|
uint32_t ui32Options);
|
|
extern am_hal_iom_status_e am_hal_iom_i2c_read_nq(uint32_t ui32Module,
|
|
uint32_t ui32BusAddress,
|
|
uint32_t *pui32Data,
|
|
uint32_t ui32NumBytes,
|
|
uint32_t ui32Options);
|
|
extern am_hal_iom_status_e am_hal_iom_i2c_write_nb(uint32_t ui32Module,
|
|
uint32_t ui32BusAddress,
|
|
uint32_t *pui32Data,
|
|
uint32_t ui32NumBytes,
|
|
uint32_t ui32Options,
|
|
am_hal_iom_callback_t pfnCallback);
|
|
extern am_hal_iom_status_e am_hal_iom_i2c_read_nb(uint32_t ui32Module,
|
|
uint32_t ui32BusAddress,
|
|
uint32_t *pui32Data,
|
|
uint32_t ui32NumBytes,
|
|
uint32_t ui32Options,
|
|
am_hal_iom_callback_t pfnCallback);
|
|
extern am_hal_iom_status_e am_hal_iom_i2c_cmd_run(uint32_t ui32Operation,
|
|
uint32_t ui32Module,
|
|
uint32_t ui32BusAddress,
|
|
uint32_t ui32NumBytes,
|
|
uint32_t ui32Options);
|
|
extern void am_hal_iom_command_repeat_set(uint32_t ui32Module,
|
|
uint32_t ui32CmdCount);
|
|
extern uint32_t am_hal_iom_status_get(uint32_t ui32Module);
|
|
extern am_hal_iom_status_e am_hal_iom_error_status_get(uint32_t ui32Module);
|
|
extern uint32_t am_hal_iom_fifo_write(uint32_t ui32Module, uint32_t *pui32Data,
|
|
uint32_t ui32NumBytes);
|
|
extern uint32_t am_hal_iom_fifo_read(uint32_t ui32Module, uint32_t *pui32Data,
|
|
uint32_t ui32NumBytes);
|
|
extern uint8_t am_hal_iom_fifo_empty_slots(uint32_t ui32Module);
|
|
extern uint8_t am_hal_iom_fifo_full_slots(uint32_t ui32Module);
|
|
extern void am_hal_iom_poll_complete(uint32_t ui32Module);
|
|
extern void am_hal_iom_int_service(uint32_t ui32Module, uint32_t ui32Status);
|
|
extern void am_hal_iom_int_enable(uint32_t ui32Module, uint32_t ui32Interrupt);
|
|
extern uint32_t am_hal_iom_int_enable_get(uint32_t ui32Module);
|
|
extern void am_hal_iom_int_disable(uint32_t ui32Module, uint32_t ui32Interrupt);
|
|
extern void am_hal_iom_int_clear(uint32_t ui32Module, uint32_t ui32Interrupt);
|
|
extern void am_hal_iom_int_set(uint32_t ui32Module, uint32_t ui32Interrupt);
|
|
extern uint32_t am_hal_iom_int_status_get(uint32_t ui32Module, bool bEnabledOnly);
|
|
extern void am_hal_iom_queue_init(uint32_t ui32ModuleNum,
|
|
am_hal_iom_queue_entry_t *psQueueMemory,
|
|
uint32_t ui32QueueMemSize);
|
|
extern uint32_t am_hal_iom_queue_length_get(uint32_t ui32Module);
|
|
extern void am_hal_iom_sleeping_queue_flush(uint32_t ui32Module);
|
|
extern am_hal_iom_status_e am_hal_iom_queue_spi_write(uint32_t ui32Module, uint32_t ui32ChipSelect,
|
|
uint32_t *pui32Data, uint32_t ui32NumBytes,
|
|
uint32_t ui32Options,
|
|
am_hal_iom_callback_t pfnCallback);
|
|
extern am_hal_iom_status_e am_hal_iom_queue_spi_read(uint32_t ui32Module, uint32_t ui32ChipSelect,
|
|
uint32_t *pui32Data, uint32_t ui32NumBytes,
|
|
uint32_t ui32Options,
|
|
am_hal_iom_callback_t pfnCallback);
|
|
extern am_hal_iom_status_e am_hal_iom_queue_i2c_write(uint32_t ui32Module, uint32_t ui32BusAddress,
|
|
uint32_t *pui32Data, uint32_t ui32NumBytes,
|
|
uint32_t ui32Options,
|
|
am_hal_iom_callback_t pfnCallback);
|
|
extern am_hal_iom_status_e am_hal_iom_queue_i2c_read(uint32_t ui32Module, uint32_t ui32BusAddress,
|
|
uint32_t *pui32Data, uint32_t ui32NumBytes,
|
|
uint32_t ui32Options,
|
|
am_hal_iom_callback_t pfnCallback);
|
|
extern void am_hal_iom_queue_start_next_msg(uint32_t ui32Module);
|
|
extern void am_hal_iom_queue_service(uint32_t ui32Module, uint32_t ui32Status);
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Helper functions.
|
|
//
|
|
//*****************************************************************************
|
|
#define AM_IOMASTER_ISR_QUEUE(x) \
|
|
void am_iomaster##x##_isr(void) \
|
|
{ \
|
|
uint32_t ui32IntStatus; \
|
|
ui32IntStatus = am_hal_iom_int_status_get(x, false); \
|
|
am_hal_iom_int_clear(x, ui32IntStatus); \
|
|
am_hal_iom_queue_service(x, ui32IntStatus); \
|
|
}
|
|
|
|
#define AM_IOMASTER_ISR_NB(x) \
|
|
void am_iomaster##x##_isr(void) \
|
|
{ \
|
|
uint32_t ui32IntStatus; \
|
|
ui32IntStatus = am_hal_iom_int_status_get(x, false); \
|
|
am_hal_iom_int_clear(x, ui32IntStatus); \
|
|
am_hal_iom_int_service(x, ui32IntStatus); \
|
|
}
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif // AM_HAL_IOM_H
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// End Doxygen group.
|
|
//! @}
|
|
//
|
|
//*****************************************************************************
|