380 lines
14 KiB
C
380 lines
14 KiB
C
/* This header file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */
|
|
|
|
/*This file has been prepared for Doxygen automatic documentation generation.*/
|
|
/*! \file *********************************************************************
|
|
*
|
|
* \brief High-level library abstracting features such as oscillators/pll/dfll
|
|
* configuration, clock configuration, System-sensible parameters
|
|
* configuration, buses clocks configuration, sleep mode, reset.
|
|
*
|
|
*
|
|
* - Compiler: IAR EWAVR32 and GNU GCC for AVR32
|
|
* - Supported devices: All AVR32 devices.
|
|
* - AppNote:
|
|
*
|
|
* \author Atmel Corporation: http://www.atmel.com \n
|
|
* Support and FAQ: http://support.atmel.no/
|
|
*
|
|
*****************************************************************************/
|
|
|
|
/* Copyright (c) 2009 Atmel Corporation. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright notice, this
|
|
* list of conditions and the following disclaimer.
|
|
*
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
*
|
|
* 3. The name of Atmel may not be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* 4. This software may only be redistributed and used in connection with an Atmel
|
|
* AVR product.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
|
|
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
|
|
* EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
|
|
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
|
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
|
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
|
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE
|
|
*
|
|
*/
|
|
|
|
#ifndef _POWER_CLOCKS_LIB_H_
|
|
#define _POWER_CLOCKS_LIB_H_
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
#include <avr32/io.h>
|
|
#include "compiler.h"
|
|
|
|
#ifndef AVR32_PM_VERSION_RESETVALUE
|
|
// Support for UC3A, UC3A3, UC3B parts.
|
|
#include "pm.h"
|
|
#else
|
|
//! Device-specific data
|
|
#if UC3L
|
|
#include "pm_uc3l.h"
|
|
#include "scif_uc3l.h"
|
|
#include "flashcdw.h"
|
|
#elif UC3C
|
|
#include "pm_uc3c.h"
|
|
#include "scif_uc3c.h"
|
|
#include "flashc.h"
|
|
#endif
|
|
#endif
|
|
|
|
/*! \name Clocks Management
|
|
*/
|
|
//! @{
|
|
|
|
//! The different oscillators
|
|
typedef enum
|
|
{
|
|
PCL_OSC0 = 0,
|
|
PCL_OSC1 = 1
|
|
} pcl_osc_t;
|
|
|
|
//! The different DFLLs
|
|
typedef enum
|
|
{
|
|
PCL_DFLL0 = 0,
|
|
PCL_DFLL1 = 1
|
|
} pcl_dfll_t;
|
|
|
|
//! Possible Main Clock Sources
|
|
typedef enum
|
|
{
|
|
PCL_MC_RCSYS, // Default main clock source, supported by all (aka Slow Clock)
|
|
PCL_MC_OSC0, // Supported by all
|
|
PCL_MC_OSC1, // Supported by UC3C only
|
|
PCL_MC_OSC0_PLL0, // Supported by UC3A, UC3B, UC3A3, UC3C (the main clock source is PLL0 with OSC0 as reference)
|
|
PCL_MC_OSC1_PLL0, // Supported by UC3A, UC3B, UC3A3, UC3C (the main clock source is PLL0 with OSC1 as reference)
|
|
PCL_MC_OSC0_PLL1, // Supported by UC3C (the main clock source is PLL1 with OSC0 as reference)
|
|
PCL_MC_OSC1_PLL1, // Supported by UC3C (the main clock source is PLL1 with OSC1 as reference)
|
|
PCL_MC_DFLL0, // Supported by UC3L
|
|
PCL_MC_DFLL1, // Not supported yet
|
|
PCL_MC_RC120M, // Supported by UC3L, UC3C
|
|
PCL_MC_RC8M, // Supported by UC3C
|
|
PCL_MC_CRIPOSC // Supported by UC3C
|
|
} pcl_mainclk_t;
|
|
|
|
//! Input and output parameters to configure clocks with pcl_configure_clocks().
|
|
// NOTE: regarding the frequency settings, always abide by the datasheet rules and min & max supported frequencies.
|
|
#ifndef AVR32_PM_VERSION_RESETVALUE
|
|
// Support for UC3A, UC3A3, UC3B parts.
|
|
#define pcl_freq_param_t pm_freq_param_t // See pm.h
|
|
#else
|
|
// Support for UC3C, UC3L parts.
|
|
typedef struct
|
|
{
|
|
//! Main clock source selection (input argument).
|
|
pcl_mainclk_t main_clk_src;
|
|
|
|
//! Target CPU frequency (input/output argument).
|
|
unsigned long cpu_f;
|
|
|
|
//! Target PBA frequency (input/output argument).
|
|
unsigned long pba_f;
|
|
|
|
//! Target PBB frequency (input/output argument).
|
|
unsigned long pbb_f;
|
|
|
|
//! Target PBC frequency (input/output argument).
|
|
unsigned long pbc_f;
|
|
|
|
//! Oscillator 0's external crystal(or external clock) frequency (board dependant) (input argument).
|
|
unsigned long osc0_f;
|
|
|
|
//! Oscillator 0's external crystal(or external clock) startup time: AVR32_PM_OSCCTRL0_STARTUP_x_RCOSC (input argument).
|
|
unsigned long osc0_startup;
|
|
|
|
//! DFLL target frequency (input/output argument) (NOTE: the bigger, the most stable the frequency)
|
|
unsigned long dfll_f;
|
|
|
|
//! Other parameters that might be necessary depending on the device (implementation-dependent).
|
|
// For the UC3L DFLL setup, this parameter should be pointing to a structure of
|
|
// type (scif_gclk_opt_t *).
|
|
void *pextra_params;
|
|
} pcl_freq_param_t;
|
|
#endif
|
|
|
|
//! Define "not supported" for the lib.
|
|
#define PCL_NOT_SUPPORTED (-10000)
|
|
|
|
/*! \brief Automatically configure the CPU, PBA, PBB, and HSB clocks
|
|
*
|
|
* This function needs some parameters stored in a pcl_freq_param_t structure:
|
|
* - main_clk_src is the id of the main clock source to use,
|
|
* - cpu_f and pba_f and pbb_f are the wanted frequencies,
|
|
* - osc0_f is the oscillator 0's external crystal (or external clock) on-board frequency (e.g. FOSC0),
|
|
* - osc0_startup is the oscillator 0's external crystal (or external clock) startup time (e.g. OSC0_STARTUP).
|
|
* - dfll_f is the target DFLL frequency to set-up if main_clk_src is the dfll.
|
|
*
|
|
* The CPU, HSB and PBA frequencies programmed after configuration are stored back into cpu_f and pba_f.
|
|
*
|
|
* \note: since it is dynamically computing the appropriate field values of the
|
|
* configuration registers from the parameters structure, this function is not
|
|
* optimal in terms of code size. For a code size optimal solution, it is better
|
|
* to create a new function from pcl_configure_clocks() and modify it to use
|
|
* preprocessor computation from pre-defined target frequencies.
|
|
*
|
|
* \param param pointer on the configuration structure.
|
|
*
|
|
* \retval 0 Success.
|
|
* \retval <0 The configuration cannot be performed.
|
|
*/
|
|
extern long int pcl_configure_clocks(pcl_freq_param_t *param);
|
|
|
|
/*! \brief Automatically configure the CPU, PBA, PBB, and HSB clocks using the RCSYS osc as main source clock.
|
|
*
|
|
* This function needs some parameters stored in a pcl_freq_param_t structure:
|
|
* - cpu_f and pba_f and pbb_f are the wanted frequencies
|
|
*
|
|
* Supported main clock sources: PCL_MC_RCSYS
|
|
*
|
|
* Supported synchronous clocks frequencies:
|
|
* 115200Hz, 57600Hz, 28800Hz, 14400Hz, 7200Hz, 3600Hz, 1800Hz, 900Hz, 450Hz.
|
|
*
|
|
* \note: by default, this implementation doesn't perform thorough checks on the
|
|
* input parameters. To enable the checks, define AVR32SFW_INPUT_CHECK.
|
|
*
|
|
* \note: since it is dynamically computing the appropriate field values of the
|
|
* configuration registers from the parameters structure, this function is not
|
|
* optimal in terms of code size. For a code size optimal solution, it is better
|
|
* to create a new function from pcl_configure_clocks_rcsys() and modify it to use
|
|
* preprocessor computation from pre-defined target frequencies.
|
|
*
|
|
* \param param pointer on the configuration structure.
|
|
*
|
|
* \retval 0 Success.
|
|
* \retval <0 The configuration cannot be performed.
|
|
*/
|
|
extern long int pcl_configure_clocks_rcsys(pcl_freq_param_t *param);
|
|
|
|
/*! \brief Automatically configure the CPU, PBA, PBB, and HSB clocks using the RC120M osc as main source clock.
|
|
*
|
|
* This function needs some parameters stored in a pcl_freq_param_t structure:
|
|
* - cpu_f and pba_f and pbb_f are the wanted frequencies
|
|
*
|
|
* Supported main clock sources: PCL_MC_RC120M
|
|
*
|
|
* Supported synchronous clocks frequencies:
|
|
* 30MHz, 15MHz, 7.5MHz, 3.75MHz, 1.875MHz, 937.5kHz, 468.75kHz.
|
|
*
|
|
* \note: by default, this implementation doesn't perform thorough checks on the
|
|
* input parameters. To enable the checks, define AVR32SFW_INPUT_CHECK.
|
|
*
|
|
* \note: since it is dynamically computing the appropriate field values of the
|
|
* configuration registers from the parameters structure, this function is not
|
|
* optimal in terms of code size. For a code size optimal solution, it is better
|
|
* to create a new function from pcl_configure_clocks_rc120m() and modify it to
|
|
* use preprocessor computation from pre-defined target frequencies.
|
|
*
|
|
* \param param pointer on the configuration structure.
|
|
*
|
|
* \retval 0 Success.
|
|
* \retval <0 The configuration cannot be performed.
|
|
*/
|
|
extern long int pcl_configure_clocks_rc120m(pcl_freq_param_t *param);
|
|
|
|
/*! \brief Automatically configure the CPU, PBA, PBB, and HSB clocks using the OSC0 osc as main source clock
|
|
*
|
|
* This function needs some parameters stored in a pcl_freq_param_t structure:
|
|
* - cpu_f and pba_f and pbb_f are the wanted frequencies,
|
|
* - osc0_f is the oscillator 0's external crystal (or external clock) on-board frequency (e.g. FOSC0),
|
|
* - osc0_startup is the oscillator 0's external crystal (or external clock) startup time (e.g. OSC0_STARTUP).
|
|
*
|
|
* Supported main clock sources: PCL_MC_OSC0
|
|
*
|
|
* Supported synchronous clocks frequencies:
|
|
* (these obviously depend on the OSC0 frequency; we'll take 16MHz as an example)
|
|
* 16MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500kHz, 250kHz, 125kHz, 62.5kHz.
|
|
*
|
|
* \note: by default, this implementation doesn't perform thorough checks on the
|
|
* input parameters. To enable the checks, define AVR32SFW_INPUT_CHECK.
|
|
*
|
|
* \note: since it is dynamically computing the appropriate field values of the
|
|
* configuration registers from the parameters structure, this function is not
|
|
* optimal in terms of code size. For a code size optimal solution, it is better
|
|
* to create a new function from pcl_configure_clocks_osc0() and modify it to use
|
|
* preprocessor computation from pre-defined target frequencies.
|
|
*
|
|
* \param param pointer on the configuration structure.
|
|
*
|
|
* \retval 0 Success.
|
|
* \retval <0 The configuration cannot be performed.
|
|
*/
|
|
extern long int pcl_configure_clocks_osc0(pcl_freq_param_t *param);
|
|
|
|
/*! \brief Automatically configure the CPU, PBA, PBB, and HSB clocks using the DFLL0 as main source clock
|
|
*
|
|
* This function needs some parameters stored in a pcl_freq_param_t structure:
|
|
* - cpu_f and pba_f and pbb_f are the wanted frequencies,
|
|
* - dfll_f is the target DFLL frequency to set-up
|
|
*
|
|
* \note: when the DFLL0 is to be used as main source clock for the synchronous clocks,
|
|
* the target frequency of the DFLL should be chosen to be as high as possible
|
|
* within the specification range (for stability reasons); the target cpu and pbx
|
|
* frequencies will then be reached by appropriate division ratio.
|
|
*
|
|
* Supported main clock sources: PCL_MC_DFLL0
|
|
*
|
|
* Supported synchronous clocks frequencies:
|
|
* (these obviously depend on the DFLL target frequency; we'll take 100MHz as an example)
|
|
* 50MHz, 25MHz, 12.5MHz, 6.25MHz, 3.125MHz, 1562.5kHz, 781.25kHz, 390.625kHz.
|
|
*
|
|
* \note: by default, this implementation doesn't perform thorough checks on the
|
|
* input parameters. To enable the checks, define AVR32SFW_INPUT_CHECK.
|
|
*
|
|
* \note: since it is dynamically computing the appropriate field values of the
|
|
* configuration registers from the parameters structure, this function is not
|
|
* optimal in terms of code size. For a code size optimal solution, it is better
|
|
* to create a new function from pcl_configure_clocks_dfll0() and modify it to
|
|
* use preprocessor computation from pre-defined target frequencies.
|
|
*
|
|
* \param param pointer on the configuration structure.
|
|
*
|
|
* \retval 0 Success.
|
|
* \retval <0 The configuration cannot be performed.
|
|
*/
|
|
extern long int pcl_configure_clocks_dfll0(pcl_freq_param_t *param);
|
|
|
|
/*! \brief Switch the main clock source to Osc0 configured in crystal mode
|
|
*
|
|
* \param osc The oscillator to enable and switch to.
|
|
* \param fcrystal Oscillator external crystal frequency (Hz)
|
|
* \param startup Oscillator startup time.
|
|
*
|
|
* \return Status.
|
|
* \retval 0 Success.
|
|
* \retval <0 An error occured.
|
|
*/
|
|
extern long int pcl_switch_to_osc(pcl_osc_t osc, unsigned int fcrystal, unsigned int startup);
|
|
|
|
/*! \brief Enable the clock of a module.
|
|
*
|
|
* \param module The module to clock (use one of the defines in the part-specific
|
|
* header file under "toolchain folder"/avr32/inc(lude)/avr32/; depending on the
|
|
* clock domain, look for the sections "CPU clocks", "HSB clocks", "PBx clocks"
|
|
* or look in the module section).
|
|
*
|
|
* \return Status.
|
|
* \retval 0 Success.
|
|
* \retval <0 An error occured.
|
|
*/
|
|
#ifndef AVR32_PM_VERSION_RESETVALUE
|
|
// Implementation for UC3A, UC3A3, UC3B parts.
|
|
#define pcl_enable_module(module) pm_enable_module(&AVR32_PM, module)
|
|
#else
|
|
// Implementation for UC3C, UC3L parts.
|
|
#define pcl_enable_module(module) pm_enable_module(module)
|
|
#endif
|
|
|
|
/*! \brief Disable the clock of a module.
|
|
*
|
|
* \param module The module to shut down (use one of the defines in the part-specific
|
|
* header file under "toolchain folder"/avr32/inc(lude)/avr32/; depending on the
|
|
* clock domain, look for the sections "CPU clocks", "HSB clocks", "PBx clocks"
|
|
* or look in the module section).
|
|
*
|
|
* \return Status.
|
|
* \retval 0 Success.
|
|
* \retval <0 An error occured.
|
|
*/
|
|
#ifndef AVR32_PM_VERSION_RESETVALUE
|
|
// Implementation for UC3A, UC3A3, UC3B parts.
|
|
#define pcl_disable_module(module) pm_disable_module(&AVR32_PM, module)
|
|
#else
|
|
// Implementation for UC3C, UC3L parts.
|
|
#define pcl_disable_module(module) pm_disable_module(module)
|
|
#endif
|
|
|
|
/*! \brief Configure the USB Clock
|
|
*
|
|
*
|
|
* \return Status.
|
|
* \retval 0 Success.
|
|
* \retval <0 An error occured.
|
|
*/
|
|
extern long int pcl_configure_usb_clock(void);
|
|
|
|
//! @}
|
|
|
|
/*! \name Power Management
|
|
*/
|
|
//! @{
|
|
/*!
|
|
* \brief Read the content of the GPLP registers
|
|
* \param gplp GPLP register index (0,1,... depending on the number of GPLP registers for a given part)
|
|
*
|
|
* \return The content of the chosen GPLP register.
|
|
*/
|
|
extern unsigned long pcl_read_gplp(unsigned long gplp);
|
|
|
|
|
|
/*!
|
|
* \brief Write into the GPLP registers
|
|
* \param gplp GPLP register index (0,1,... depending on the number of GPLP registers for a given part)
|
|
* \param value Value to write
|
|
*/
|
|
extern void pcl_write_gplp(unsigned long gplp, unsigned long value);
|
|
|
|
//! @}
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif // _POWER_CLOCKS_LIB_H_
|