3643 lines
200 KiB
C
3643 lines
200 KiB
C
//*****************************************************************************
|
|
//
|
|
// hw_sysctl.h - Macros used when accessing the system control hardware.
|
|
//
|
|
// Copyright (c) 2005-2011 Texas Instruments Incorporated. All rights reserved.
|
|
// Software License Agreement
|
|
//
|
|
// Texas Instruments (TI) is supplying this software for use solely and
|
|
// exclusively on TI's microcontroller products. The software is owned by
|
|
// TI and/or its suppliers, and is protected under applicable copyright
|
|
// laws. You may not combine this software with "viral" open-source
|
|
// software in order to form a larger program.
|
|
//
|
|
// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
|
|
// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
|
|
// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
|
|
// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
|
|
// DAMAGES, FOR ANY REASON WHATSOEVER.
|
|
//
|
|
// This is part of revision 8264 of the Stellaris Firmware Development Package.
|
|
//
|
|
//*****************************************************************************
|
|
|
|
#ifndef __HW_SYSCTL_H__
|
|
#define __HW_SYSCTL_H__
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the System Control register addresses.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DID0 0x400FE000 // Device Identification 0
|
|
#define SYSCTL_DID1 0x400FE004 // Device Identification 1
|
|
#define SYSCTL_DC0 0x400FE008 // Device Capabilities 0
|
|
#define SYSCTL_DC1 0x400FE010 // Device Capabilities 1
|
|
#define SYSCTL_DC2 0x400FE014 // Device Capabilities 2
|
|
#define SYSCTL_DC3 0x400FE018 // Device Capabilities 3
|
|
#define SYSCTL_DC4 0x400FE01C // Device Capabilities 4
|
|
#define SYSCTL_DC5 0x400FE020 // Device Capabilities 5
|
|
#define SYSCTL_DC6 0x400FE024 // Device Capabilities 6
|
|
#define SYSCTL_DC7 0x400FE028 // Device Capabilities 7
|
|
#define SYSCTL_DC8 0x400FE02C // Device Capabilities 8 ADC
|
|
// Channels
|
|
#define SYSCTL_PBORCTL 0x400FE030 // Brown-Out Reset Control
|
|
#define SYSCTL_LDOPCTL 0x400FE034 // LDO Power Control
|
|
#define SYSCTL_SRCR0 0x400FE040 // Software Reset Control 0
|
|
#define SYSCTL_SRCR1 0x400FE044 // Software Reset Control 1
|
|
#define SYSCTL_SRCR2 0x400FE048 // Software Reset Control 2
|
|
#define SYSCTL_RIS 0x400FE050 // Raw Interrupt Status
|
|
#define SYSCTL_IMC 0x400FE054 // Interrupt Mask Control
|
|
#define SYSCTL_MISC 0x400FE058 // Masked Interrupt Status and
|
|
// Clear
|
|
#define SYSCTL_RESC 0x400FE05C // Reset Cause
|
|
#define SYSCTL_RCC 0x400FE060 // Run-Mode Clock Configuration
|
|
#define SYSCTL_PLLCFG 0x400FE064 // XTAL to PLL Translation
|
|
#define SYSCTL_GPIOHBCTL 0x400FE06C // GPIO High-Performance Bus
|
|
// Control
|
|
#define SYSCTL_RCC2 0x400FE070 // Run-Mode Clock Configuration 2
|
|
#define SYSCTL_MOSCCTL 0x400FE07C // Main Oscillator Control
|
|
#define SYSCTL_RCGC0 0x400FE100 // Run Mode Clock Gating Control
|
|
// Register 0
|
|
#define SYSCTL_RCGC1 0x400FE104 // Run Mode Clock Gating Control
|
|
// Register 1
|
|
#define SYSCTL_RCGC2 0x400FE108 // Run Mode Clock Gating Control
|
|
// Register 2
|
|
#define SYSCTL_SCGC0 0x400FE110 // Sleep Mode Clock Gating Control
|
|
// Register 0
|
|
#define SYSCTL_SCGC1 0x400FE114 // Sleep Mode Clock Gating Control
|
|
// Register 1
|
|
#define SYSCTL_SCGC2 0x400FE118 // Sleep Mode Clock Gating Control
|
|
// Register 2
|
|
#define SYSCTL_DCGC0 0x400FE120 // Deep Sleep Mode Clock Gating
|
|
// Control Register 0
|
|
#define SYSCTL_DCGC1 0x400FE124 // Deep-Sleep Mode Clock Gating
|
|
// Control Register 1
|
|
#define SYSCTL_DCGC2 0x400FE128 // Deep Sleep Mode Clock Gating
|
|
// Control Register 2
|
|
#define SYSCTL_DSLPCLKCFG 0x400FE144 // Deep Sleep Clock Configuration
|
|
#define SYSCTL_SYSPROP 0x400FE14C // System Properties
|
|
#define SYSCTL_PIOSCCAL 0x400FE150 // Precision Internal Oscillator
|
|
// Calibration
|
|
#define SYSCTL_CLKVCLR 0x400FE150 // Clock Verification Clear
|
|
#define SYSCTL_PIOSCSTAT 0x400FE154 // Precision Internal Oscillator
|
|
// Statistics
|
|
#define SYSCTL_LDOARST 0x400FE160 // Allow Unregulated LDO to Reset
|
|
// the Part
|
|
#define SYSCTL_PLLFREQ0 0x400FE160 // PLL Frequency 0
|
|
#define SYSCTL_PLLFREQ1 0x400FE164 // PLL Frequency
|
|
#define SYSCTL_PLLSTAT 0x400FE168 // PLL Status
|
|
#define SYSCTL_I2SMCLKCFG 0x400FE170 // I2S MCLK Configuration
|
|
#define SYSCTL_DC9 0x400FE190 // Device Capabilities 9 ADC
|
|
// Digital Comparators
|
|
#define SYSCTL_NVMSTAT 0x400FE1A0 // Non-Volatile Memory Information
|
|
#define SYSCTL_PPWD 0x400FE300 // Watchdog Timer Peripheral
|
|
// Present
|
|
#define SYSCTL_PPTIMER 0x400FE304 // Timer Peripheral Present
|
|
#define SYSCTL_PPGPIO 0x400FE308 // General-Purpose Input/Output
|
|
// Peripheral Present
|
|
#define SYSCTL_PPDMA 0x400FE30C // Micro Direct Memory Access
|
|
// Peripheral Present
|
|
#define SYSCTL_PPHIB 0x400FE314 // Hibernation Peripheral Present
|
|
#define SYSCTL_PPUART 0x400FE318 // Universal Asynchronous
|
|
// Receiver/Transmitter Peripheral
|
|
// Present
|
|
#define SYSCTL_PPSSI 0x400FE31C // Synchronous Serial Interface
|
|
// Peripheral Present
|
|
#define SYSCTL_PPI2C 0x400FE320 // Inter-Integrated Circuit
|
|
// Peripheral Present
|
|
#define SYSCTL_PPUSB 0x400FE328 // Universal Serial Bus Peripheral
|
|
// Present
|
|
#define SYSCTL_PPCAN 0x400FE334 // Controller Area Network
|
|
// Peripheral Present
|
|
#define SYSCTL_PPADC 0x400FE338 // Analog-to-Digital Converter
|
|
// Peripheral Present
|
|
#define SYSCTL_PPACMP 0x400FE33C // Analog Comparator Peripheral
|
|
// Present
|
|
#define SYSCTL_PPPWM 0x400FE340 // Pulse Width Modulator Peripheral
|
|
// Present
|
|
#define SYSCTL_PPQEI 0x400FE344 // Quadrature Encoder Interface
|
|
// Peripheral Present
|
|
#define SYSCTL_PPLPC 0x400FE348 // Low Pin Count Interface
|
|
// Peripheral Present
|
|
#define SYSCTL_PPPECI 0x400FE350 // Platform Environment Control
|
|
// Interface Peripheral Present
|
|
#define SYSCTL_PPFAN 0x400FE354 // FAN Peripheral Present
|
|
#define SYSCTL_PPEEPROM 0x400FE358 // EEPROM Peripheral Present
|
|
#define SYSCTL_PPWTIMER 0x400FE35C // Wide Timer Peripheral Present
|
|
#define SYSCTL_SRWD 0x400FE500 // Watchdog Timer Software Reset
|
|
#define SYSCTL_SRTIMER 0x400FE504 // Timer Software Reset
|
|
#define SYSCTL_SRGPIO 0x400FE508 // General-Purpose Input/Output
|
|
// Software Reset
|
|
#define SYSCTL_SRDMA 0x400FE50C // Micro Direct Memory Access
|
|
// Software Reset
|
|
#define SYSCTL_SRHIB 0x400FE514 // Hibernation Software Reset
|
|
#define SYSCTL_SRUART 0x400FE518 // Universal Asynchronous
|
|
// Receiver/Transmitter Software
|
|
// Reset
|
|
#define SYSCTL_SRSSI 0x400FE51C // Synchronous Serial Interface
|
|
// Software Reset
|
|
#define SYSCTL_SRI2C 0x400FE520 // Inter-Integrated Circuit
|
|
// Software Reset
|
|
#define SYSCTL_SRUSB 0x400FE528 // Universal Serial Bus Software
|
|
// Reset
|
|
#define SYSCTL_SRCAN 0x400FE534 // Controller Area Network Software
|
|
// Reset
|
|
#define SYSCTL_SRADC 0x400FE538 // Analog-to-Digital Converter
|
|
// Software Reset
|
|
#define SYSCTL_SRACMP 0x400FE53C // Analog Comparator Software Reset
|
|
#define SYSCTL_SRPWM 0x400FE540 // Pulse Width Modulator Software
|
|
// Reset
|
|
#define SYSCTL_SRQEI 0x400FE544 // Quadrature Encoder Interface
|
|
// Software Reset
|
|
#define SYSCTL_SRLPC 0x400FE548 // Low Pin Count Interface Software
|
|
// Reset
|
|
#define SYSCTL_SRPECI 0x400FE550 // Platform Environment Control
|
|
// Interface Software Reset
|
|
#define SYSCTL_SRFAN 0x400FE554 // FAN Software Reset
|
|
#define SYSCTL_SREEPROM 0x400FE558 // EEPROM Software Reset
|
|
#define SYSCTL_SRWTIMER 0x400FE55C // Wide Timer Software Reset
|
|
#define SYSCTL_RCGCWD 0x400FE600 // Watchdog Timer Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCTIMER 0x400FE604 // Timer Run Mode Clock Gating
|
|
// Control
|
|
#define SYSCTL_RCGCGPIO 0x400FE608 // General-Purpose Input/Output Run
|
|
// Mode Clock Gating Control
|
|
#define SYSCTL_RCGCDMA 0x400FE60C // Micro Direct Memory Access Run
|
|
// Mode Clock Gating Control
|
|
#define SYSCTL_RCGCHIB 0x400FE614 // Hibernation Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCUART 0x400FE618 // Universal Asynchronous
|
|
// Receiver/Transmitter Run Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_RCGCSSI 0x400FE61C // Synchronous Serial Interface Run
|
|
// Mode Clock Gating Control
|
|
#define SYSCTL_RCGCI2C 0x400FE620 // Inter-Integrated Circuit Run
|
|
// Mode Clock Gating Control
|
|
#define SYSCTL_RCGCUSB 0x400FE628 // Universal Serial Bus Run Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_RCGCCAN 0x400FE634 // Controller Area Network Run Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_RCGCADC 0x400FE638 // Analog-to-Digital Converter Run
|
|
// Mode Clock Gating Control
|
|
#define SYSCTL_RCGCACMP 0x400FE63C // Analog Comparator Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCPWM 0x400FE640 // Pulse Width Modulator Run Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_RCGCQEI 0x400FE644 // Quadrature Encoder Interface Run
|
|
// Mode Clock Gating Control
|
|
#define SYSCTL_RCGCLPC 0x400FE648 // Low Pin Count Interface Run Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_RCGCPECI 0x400FE650 // Platform Environment Control
|
|
// Interface Run Mode Clock Gating
|
|
// Control
|
|
#define SYSCTL_RCGCFAN 0x400FE654 // FAN Run Mode Clock Gating
|
|
// Control
|
|
#define SYSCTL_RCGCEEPROM 0x400FE658 // EEPROM Run Mode Clock Gating
|
|
// Control
|
|
#define SYSCTL_RCGCWTIMER 0x400FE65C // Wide Timer Run Mode Clock Gating
|
|
// Control
|
|
#define SYSCTL_SCGCWD 0x400FE700 // Watchdog Timer Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCTIMER 0x400FE704 // Timer Sleep Mode Clock Gating
|
|
// Control
|
|
#define SYSCTL_SCGCGPIO 0x400FE708 // General-Purpose Input/Output
|
|
// Sleep Mode Clock Gating Control
|
|
#define SYSCTL_SCGCDMA 0x400FE70C // Micro Direct Memory Access Sleep
|
|
// Mode Clock Gating Control
|
|
#define SYSCTL_SCGCHIB 0x400FE714 // Hibernation Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCUART 0x400FE718 // Universal Asynchronous
|
|
// Receiver/Transmitter Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_SCGCSSI 0x400FE71C // Synchronous Serial Interface
|
|
// Sleep Mode Clock Gating Control
|
|
#define SYSCTL_SCGCI2C 0x400FE720 // Inter-Integrated Circuit Sleep
|
|
// Mode Clock Gating Control
|
|
#define SYSCTL_SCGCUSB 0x400FE728 // Universal Serial Bus Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_SCGCCAN 0x400FE734 // Controller Area Network Sleep
|
|
// Mode Clock Gating Control
|
|
#define SYSCTL_SCGCADC 0x400FE738 // Analog-to-Digital Converter
|
|
// Sleep Mode Clock Gating Control
|
|
#define SYSCTL_SCGCACMP 0x400FE73C // Analog Comparator Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_SCGCPWM 0x400FE740 // Pulse Width Modulator Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_SCGCQEI 0x400FE744 // Quadrature Encoder Interface
|
|
// Sleep Mode Clock Gating Control
|
|
#define SYSCTL_SCGCLPC 0x400FE748 // Low Pin Count Interface Sleep
|
|
// Mode Clock Gating Control
|
|
#define SYSCTL_SCGCPECI 0x400FE750 // Platform Environment Control
|
|
// Interface Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCFAN 0x400FE754 // FAN Sleep Mode Clock Gating
|
|
// Control
|
|
#define SYSCTL_SCGCEEPROM 0x400FE758 // EEPROM Sleep Mode Clock Gating
|
|
// Control
|
|
#define SYSCTL_SCGCWTIMER 0x400FE75C // Wide Timer Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_DCGCWD 0x400FE800 // Watchdog Timer Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCTIMER 0x400FE804 // Timer Deep-Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_DCGCGPIO 0x400FE808 // General-Purpose Input/Output
|
|
// Deep-Sleep Mode Clock Gating
|
|
// Control
|
|
#define SYSCTL_DCGCDMA 0x400FE80C // Micro Direct Memory Access
|
|
// Deep-Sleep Mode Clock Gating
|
|
// Control
|
|
#define SYSCTL_DCGCHIB 0x400FE814 // Hibernation Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCUART 0x400FE818 // Universal Asynchronous
|
|
// Receiver/Transmitter Deep-Sleep
|
|
// Mode Clock Gating Control
|
|
#define SYSCTL_DCGCSSI 0x400FE81C // Synchronous Serial Interface
|
|
// Deep-Sleep Mode Clock Gating
|
|
// Control
|
|
#define SYSCTL_DCGCI2C 0x400FE820 // Inter-Integrated Circuit
|
|
// Deep-Sleep Mode Clock Gating
|
|
// Control
|
|
#define SYSCTL_DCGCUSB 0x400FE828 // Universal Serial Bus Deep-Sleep
|
|
// Mode Clock Gating Control
|
|
#define SYSCTL_DCGCCAN 0x400FE834 // Controller Area Network
|
|
// Deep-Sleep Mode Clock Gating
|
|
// Control
|
|
#define SYSCTL_DCGCADC 0x400FE838 // Analog-to-Digital Converter
|
|
// Deep-Sleep Mode Clock Gating
|
|
// Control
|
|
#define SYSCTL_DCGCACMP 0x400FE83C // Analog Comparator Deep-Sleep
|
|
// Mode Clock Gating Control
|
|
#define SYSCTL_DCGCPWM 0x400FE840 // Pulse Width Modulator Deep-Sleep
|
|
// Mode Clock Gating Control
|
|
#define SYSCTL_DCGCQEI 0x400FE844 // Quadrature Encoder Interface
|
|
// Deep-Sleep Mode Clock Gating
|
|
// Control
|
|
#define SYSCTL_DCGCLPC 0x400FE848 // Low Pin Count Interface
|
|
// Deep-Sleep Mode Clock Gating
|
|
// Control
|
|
#define SYSCTL_DCGCPECI 0x400FE850 // Platform Environment Control
|
|
// Interface Deep-Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_DCGCFAN 0x400FE854 // FAN Deep-Sleep Mode Clock Gating
|
|
// Control
|
|
#define SYSCTL_DCGCEEPROM 0x400FE858 // EEPROM Deep-Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_DCGCWTIMER 0x400FE85C // Wide Timer Deep-Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_PCWD 0x400FE900 // Watchdog Timer Power Control
|
|
#define SYSCTL_PCTIMER 0x400FE904 // Timer Power Control
|
|
#define SYSCTL_PCGPIO 0x400FE908 // General-Purpose Input/Output
|
|
// Power Control
|
|
#define SYSCTL_PCDMA 0x400FE90C // Micro Direct Memory Access Power
|
|
// Control
|
|
#define SYSCTL_PCHIB 0x400FE914 // Hibernation Power Control
|
|
#define SYSCTL_PCUART 0x400FE918 // Universal Asynchronous
|
|
// Receiver/Transmitter Power
|
|
// Control
|
|
#define SYSCTL_PCSSI 0x400FE91C // Synchronous Serial Interface
|
|
// Power Control
|
|
#define SYSCTL_PCI2C 0x400FE920 // Inter-Integrated Circuit Power
|
|
// Control
|
|
#define SYSCTL_PCUSB 0x400FE928 // Universal Serial Bus Power
|
|
// Control
|
|
#define SYSCTL_PCCAN 0x400FE934 // Controller Area Network Power
|
|
// Control
|
|
#define SYSCTL_PCADC 0x400FE938 // Analog-to-Digital Converter
|
|
// Power Control
|
|
#define SYSCTL_PCACMP 0x400FE93C // Analog Comparator Power Control
|
|
#define SYSCTL_PCPWM 0x400FE940 // Pulse Width Modulator Power
|
|
// Control
|
|
#define SYSCTL_PCQEI 0x400FE944 // Quadrature Encoder Interface
|
|
// Power Control
|
|
#define SYSCTL_PCLPC 0x400FE948 // Low Pin Count Interface Power
|
|
// Control
|
|
#define SYSCTL_PCPECI 0x400FE950 // Platform Environment Control
|
|
// Interface Power Control
|
|
#define SYSCTL_PCFAN 0x400FE954 // Fan Power Control
|
|
#define SYSCTL_PCEEPROM 0x400FE958 // EEPROM Power Control
|
|
#define SYSCTL_PCWTIMER 0x400FE95C // Wide Timer Power Control
|
|
#define SYSCTL_PRWD 0x400FEA00 // Watchdog Timer Peripheral Ready
|
|
#define SYSCTL_PRTIMER 0x400FEA04 // Timer Peripheral Ready
|
|
#define SYSCTL_PRGPIO 0x400FEA08 // General-Purpose Input/Output
|
|
// Peripheral Ready
|
|
#define SYSCTL_PRDMA 0x400FEA0C // Micro Direct Memory Access
|
|
// Peripheral Ready
|
|
#define SYSCTL_PRHIB 0x400FEA14 // Hibernation Peripheral Ready
|
|
#define SYSCTL_PRUART 0x400FEA18 // Universal Asynchronous
|
|
// Receiver/Transmitter Peripheral
|
|
// Ready
|
|
#define SYSCTL_PRSSI 0x400FEA1C // Synchronous Serial Interface
|
|
// Peripheral Ready
|
|
#define SYSCTL_PRI2C 0x400FEA20 // Inter-Integrated Circuit
|
|
// Peripheral Ready
|
|
#define SYSCTL_PRUSB 0x400FEA28 // Universal Serial Bus Peripheral
|
|
// Ready
|
|
#define SYSCTL_PRCAN 0x400FEA34 // Controller Area Network
|
|
// Peripheral Ready
|
|
#define SYSCTL_PRADC 0x400FEA38 // Analog-to-Digital Converter
|
|
// Peripheral Ready
|
|
#define SYSCTL_PRACMP 0x400FEA3C // Analog Comparator Peripheral
|
|
// Ready
|
|
#define SYSCTL_PRPWM 0x400FEA40 // Pulse Width Modulator Peripheral
|
|
// Ready
|
|
#define SYSCTL_PRQEI 0x400FEA44 // Quadrature Encoder Interface
|
|
// Peripheral Ready
|
|
#define SYSCTL_PRLPC 0x400FEA48 // Low Pin Count Interface
|
|
// Peripheral Ready
|
|
#define SYSCTL_PRPECI 0x400FEA50 // Platform Environment Control
|
|
// Interface Peripheral Ready
|
|
#define SYSCTL_PRFAN 0x400FEA54 // FAN Peripheral Ready
|
|
#define SYSCTL_PREEPROM 0x400FEA58 // EEPROM Peripheral Ready
|
|
#define SYSCTL_PRWTIMER 0x400FEA5C // Wide Timer Peripheral Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DID0 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DID0_VER_M 0x70000000 // DID0 Version
|
|
#define SYSCTL_DID0_VER_0 0x00000000 // Initial DID0 register format
|
|
// definition for Stellaris(R)
|
|
// Sandstorm-class devices
|
|
#define SYSCTL_DID0_VER_1 0x10000000 // Second version of the DID0
|
|
// register format
|
|
#define SYSCTL_DID0_CLASS_M 0x00FF0000 // Device Class
|
|
#define SYSCTL_DID0_CLASS_SANDSTORM \
|
|
0x00000000 // Sandstorm-class Device
|
|
#define SYSCTL_DID0_CLASS_FURY 0x00010000 // Stellaris(R) Fury-class devices
|
|
#define SYSCTL_DID0_CLASS_DUSTDEVIL \
|
|
0x00030000 // Stellaris(R) DustDevil-class
|
|
// devices
|
|
#define SYSCTL_DID0_CLASS_TEMPEST \
|
|
0x00040000 // Stellaris(R) Tempest-class
|
|
// microcontrollers
|
|
#define SYSCTL_DID0_CLASS_BLIZZARD \
|
|
0x00050000 // Stellaris(R) Blizzard-class
|
|
// microcontrollers
|
|
#define SYSCTL_DID0_CLASS_FIRESTORM \
|
|
0x00060000 // Stellaris(R) Firestorm-class
|
|
// microcontrollers
|
|
#define SYSCTL_DID0_MAJ_M 0x0000FF00 // Major Revision
|
|
#define SYSCTL_DID0_MAJ_REVA 0x00000000 // Revision A (initial device)
|
|
#define SYSCTL_DID0_MAJ_REVB 0x00000100 // Revision B (first base layer
|
|
// revision)
|
|
#define SYSCTL_DID0_MAJ_REVC 0x00000200 // Revision C (second base layer
|
|
// revision)
|
|
#define SYSCTL_DID0_MIN_M 0x000000FF // Minor Revision
|
|
#define SYSCTL_DID0_MIN_0 0x00000000 // Initial device, or a major
|
|
// revision update
|
|
#define SYSCTL_DID0_MIN_1 0x00000001 // First metal layer change
|
|
#define SYSCTL_DID0_MIN_2 0x00000002 // Second metal layer change
|
|
#define SYSCTL_DID0_MIN_3 0x00000003 // Minor revision 3
|
|
#define SYSCTL_DID0_MIN_4 0x00000004 // Minor revision 4
|
|
#define SYSCTL_DID0_MIN_5 0x00000005 // Minor revision 5
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DID1 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DID1_VER_M 0xF0000000 // DID1 Version
|
|
#define SYSCTL_DID1_VER_0 0x00000000 // Initial DID1 register format
|
|
// definition, indicating a
|
|
// Stellaris LM3Snnn device
|
|
#define SYSCTL_DID1_VER_1 0x10000000 // Second version of the DID1
|
|
// register format
|
|
#define SYSCTL_DID1_FAM_M 0x0F000000 // Family
|
|
#define SYSCTL_DID1_FAM_STELLARIS \
|
|
0x00000000 // Stellaris family of
|
|
// microcontollers, that is, all
|
|
// devices with external part
|
|
// numbers starting with LM3S
|
|
#define SYSCTL_DID1_PRTNO_M 0x00FF0000 // Part Number
|
|
#define SYSCTL_DID1_PRTNO_101 0x00010000 // LM3S101
|
|
#define SYSCTL_DID1_PRTNO_102 0x00020000 // LM3S102
|
|
#define SYSCTL_DID1_PRTNO_300 0x00190000 // LM3S300
|
|
#define SYSCTL_DID1_PRTNO_301 0x00110000 // LM3S301
|
|
#define SYSCTL_DID1_PRTNO_308 0x001A0000 // LM3S308
|
|
#define SYSCTL_DID1_PRTNO_310 0x00120000 // LM3S310
|
|
#define SYSCTL_DID1_PRTNO_315 0x00130000 // LM3S315
|
|
#define SYSCTL_DID1_PRTNO_316 0x00140000 // LM3S316
|
|
#define SYSCTL_DID1_PRTNO_317 0x00170000 // LM3S317
|
|
#define SYSCTL_DID1_PRTNO_328 0x00150000 // LM3S328
|
|
#define SYSCTL_DID1_PRTNO_600 0x002A0000 // LM3S600
|
|
#define SYSCTL_DID1_PRTNO_601 0x00210000 // LM3S601
|
|
#define SYSCTL_DID1_PRTNO_608 0x002B0000 // LM3S608
|
|
#define SYSCTL_DID1_PRTNO_610 0x00220000 // LM3S610
|
|
#define SYSCTL_DID1_PRTNO_611 0x00230000 // LM3S611
|
|
#define SYSCTL_DID1_PRTNO_612 0x00240000 // LM3S612
|
|
#define SYSCTL_DID1_PRTNO_613 0x00250000 // LM3S613
|
|
#define SYSCTL_DID1_PRTNO_615 0x00260000 // LM3S615
|
|
#define SYSCTL_DID1_PRTNO_617 0x00280000 // LM3S617
|
|
#define SYSCTL_DID1_PRTNO_618 0x00290000 // LM3S618
|
|
#define SYSCTL_DID1_PRTNO_628 0x00270000 // LM3S628
|
|
#define SYSCTL_DID1_PRTNO_800 0x00380000 // LM3S800
|
|
#define SYSCTL_DID1_PRTNO_801 0x00310000 // LM3S801
|
|
#define SYSCTL_DID1_PRTNO_808 0x00390000 // LM3S808
|
|
#define SYSCTL_DID1_PRTNO_811 0x00320000 // LM3S811
|
|
#define SYSCTL_DID1_PRTNO_812 0x00330000 // LM3S812
|
|
#define SYSCTL_DID1_PRTNO_815 0x00340000 // LM3S815
|
|
#define SYSCTL_DID1_PRTNO_817 0x00360000 // LM3S817
|
|
#define SYSCTL_DID1_PRTNO_818 0x00370000 // LM3S818
|
|
#define SYSCTL_DID1_PRTNO_828 0x00350000 // LM3S828
|
|
#define SYSCTL_DID1_PRTNO_1110 0x00BF0000 // LM3S1110
|
|
#define SYSCTL_DID1_PRTNO_1133 0x00C30000 // LM3S1133
|
|
#define SYSCTL_DID1_PRTNO_1138 0x00C50000 // LM3S1138
|
|
#define SYSCTL_DID1_PRTNO_1150 0x00C10000 // LM3S1150
|
|
#define SYSCTL_DID1_PRTNO_1162 0x00C40000 // LM3S1162
|
|
#define SYSCTL_DID1_PRTNO_1165 0x00C20000 // LM3S1165
|
|
#define SYSCTL_DID1_PRTNO_1166 0x00EC0000 // LM3S1166
|
|
#define SYSCTL_DID1_PRTNO_1332 0x00C60000 // LM3S1332
|
|
#define SYSCTL_DID1_PRTNO_1435 0x00BC0000 // LM3S1435
|
|
#define SYSCTL_DID1_PRTNO_1439 0x00BA0000 // LM3S1439
|
|
#define SYSCTL_DID1_PRTNO_1512 0x00BB0000 // LM3S1512
|
|
#define SYSCTL_DID1_PRTNO_1538 0x00C70000 // LM3S1538
|
|
#define SYSCTL_DID1_PRTNO_1601 0x00DB0000 // LM3S1601
|
|
#define SYSCTL_DID1_PRTNO_1607 0x00060000 // LM3S1607
|
|
#define SYSCTL_DID1_PRTNO_1608 0x00DA0000 // LM3S1608
|
|
#define SYSCTL_DID1_PRTNO_1620 0x00C00000 // LM3S1620
|
|
#define SYSCTL_DID1_PRTNO_1621 0x00CD0000 // LM3S1621
|
|
#define SYSCTL_DID1_PRTNO_1625 0x00030000 // LM3S1625
|
|
#define SYSCTL_DID1_PRTNO_1626 0x00040000 // LM3S1626
|
|
#define SYSCTL_DID1_PRTNO_1627 0x00050000 // LM3S1627
|
|
#define SYSCTL_DID1_PRTNO_1635 0x00B30000 // LM3S1635
|
|
#define SYSCTL_DID1_PRTNO_1636 0x00EB0000 // LM3S1636
|
|
#define SYSCTL_DID1_PRTNO_1637 0x00BD0000 // LM3S1637
|
|
#define SYSCTL_DID1_PRTNO_1651 0x00B10000 // LM3S1651
|
|
#define SYSCTL_DID1_PRTNO_1751 0x00B90000 // LM3S1751
|
|
#define SYSCTL_DID1_PRTNO_1776 0x00100000 // LM3S1776
|
|
#define SYSCTL_DID1_PRTNO_1811 0x00160000 // LM3S1811
|
|
#define SYSCTL_DID1_PRTNO_1816 0x003D0000 // LM3S1816
|
|
#define SYSCTL_DID1_PRTNO_1850 0x00B40000 // LM3S1850
|
|
#define SYSCTL_DID1_PRTNO_1911 0x00DD0000 // LM3S1911
|
|
#define SYSCTL_DID1_PRTNO_1918 0x00DC0000 // LM3S1918
|
|
#define SYSCTL_DID1_PRTNO_1937 0x00B70000 // LM3S1937
|
|
#define SYSCTL_DID1_PRTNO_1958 0x00BE0000 // LM3S1958
|
|
#define SYSCTL_DID1_PRTNO_1960 0x00B50000 // LM3S1960
|
|
#define SYSCTL_DID1_PRTNO_1968 0x00B80000 // LM3S1968
|
|
#define SYSCTL_DID1_PRTNO_1969 0x00EA0000 // LM3S1969
|
|
#define SYSCTL_DID1_PRTNO_1B21 0x00CE0000 // LM3S1B21
|
|
#define SYSCTL_DID1_PRTNO_1C21 0x00CA0000 // LM3S1C21
|
|
#define SYSCTL_DID1_PRTNO_1C26 0x00CB0000 // LM3S1C26
|
|
#define SYSCTL_DID1_PRTNO_1C58 0x00980000 // LM3S1C58
|
|
#define SYSCTL_DID1_PRTNO_1D21 0x00B00000 // LM3S1D21
|
|
#define SYSCTL_DID1_PRTNO_1D26 0x00CC0000 // LM3S1D26
|
|
#define SYSCTL_DID1_PRTNO_1F11 0x001D0000 // LM3S1F11
|
|
#define SYSCTL_DID1_PRTNO_1F16 0x001B0000 // LM3S1F16
|
|
#define SYSCTL_DID1_PRTNO_1G21 0x00AF0000 // LM3S1G21
|
|
#define SYSCTL_DID1_PRTNO_1G58 0x00950000 // LM3S1G58
|
|
#define SYSCTL_DID1_PRTNO_1H11 0x001E0000 // LM3S1H11
|
|
#define SYSCTL_DID1_PRTNO_1H16 0x001C0000 // LM3S1H16
|
|
#define SYSCTL_DID1_PRTNO_1J11 0x000F0000 // LM3S1J11
|
|
#define SYSCTL_DID1_PRTNO_1J16 0x003C0000 // LM3S1J16
|
|
#define SYSCTL_DID1_PRTNO_1N11 0x000E0000 // LM3S1N11
|
|
#define SYSCTL_DID1_PRTNO_1N16 0x003B0000 // LM3S1N16
|
|
#define SYSCTL_DID1_PRTNO_1P51 0x00B20000 // LM3S1P51
|
|
#define SYSCTL_DID1_PRTNO_1R21 0x009E0000 // LM3S1R21
|
|
#define SYSCTL_DID1_PRTNO_1R26 0x00C90000 // LM3S1R26
|
|
#define SYSCTL_DID1_PRTNO_1W16 0x00300000 // LM3S1W16
|
|
#define SYSCTL_DID1_PRTNO_1Z16 0x002F0000 // LM3S1Z16
|
|
#define SYSCTL_DID1_PRTNO_2016 0x00D40000 // LM3S2016
|
|
#define SYSCTL_DID1_PRTNO_2110 0x00510000 // LM3S2110
|
|
#define SYSCTL_DID1_PRTNO_2139 0x00840000 // LM3S2139
|
|
#define SYSCTL_DID1_PRTNO_2276 0x00390000 // LM3S2276
|
|
#define SYSCTL_DID1_PRTNO_2410 0x00A20000 // LM3S2410
|
|
#define SYSCTL_DID1_PRTNO_2412 0x00590000 // LM3S2412
|
|
#define SYSCTL_DID1_PRTNO_2432 0x00560000 // LM3S2432
|
|
#define SYSCTL_DID1_PRTNO_2533 0x005A0000 // LM3S2533
|
|
#define SYSCTL_DID1_PRTNO_2601 0x00E10000 // LM3S2601
|
|
#define SYSCTL_DID1_PRTNO_2608 0x00E00000 // LM3S2608
|
|
#define SYSCTL_DID1_PRTNO_2616 0x00330000 // LM3S2616
|
|
#define SYSCTL_DID1_PRTNO_2620 0x00570000 // LM3S2620
|
|
#define SYSCTL_DID1_PRTNO_2637 0x00850000 // LM3S2637
|
|
#define SYSCTL_DID1_PRTNO_2651 0x00530000 // LM3S2651
|
|
#define SYSCTL_DID1_PRTNO_2671 0x00800000 // LM3S2671
|
|
#define SYSCTL_DID1_PRTNO_2678 0x00500000 // LM3S2678
|
|
#define SYSCTL_DID1_PRTNO_2730 0x00A40000 // LM3S2730
|
|
#define SYSCTL_DID1_PRTNO_2739 0x00520000 // LM3S2739
|
|
#define SYSCTL_DID1_PRTNO_2776 0x003A0000 // LM3S2776
|
|
#define SYSCTL_DID1_PRTNO_2793 0x006D0000 // LM3S2793
|
|
#define SYSCTL_DID1_PRTNO_2911 0x00E30000 // LM3S2911
|
|
#define SYSCTL_DID1_PRTNO_2918 0x00E20000 // LM3S2918
|
|
#define SYSCTL_DID1_PRTNO_2919 0x00ED0000 // LM3S2919
|
|
#define SYSCTL_DID1_PRTNO_2939 0x00540000 // LM3S2939
|
|
#define SYSCTL_DID1_PRTNO_2948 0x008F0000 // LM3S2948
|
|
#define SYSCTL_DID1_PRTNO_2950 0x00580000 // LM3S2950
|
|
#define SYSCTL_DID1_PRTNO_2965 0x00550000 // LM3S2965
|
|
#define SYSCTL_DID1_PRTNO_2B93 0x006C0000 // LM3S2B93
|
|
#define SYSCTL_DID1_PRTNO_2D93 0x00940000 // LM3S2D93
|
|
#define SYSCTL_DID1_PRTNO_2U93 0x00930000 // LM3S2U93
|
|
#define SYSCTL_DID1_PRTNO_3634 0x00080000 // LM3S3634
|
|
#define SYSCTL_DID1_PRTNO_3651 0x00430000 // LM3S3651
|
|
#define SYSCTL_DID1_PRTNO_3654 0x00C80000 // LM3S3654
|
|
#define SYSCTL_DID1_PRTNO_3739 0x00440000 // LM3S3739
|
|
#define SYSCTL_DID1_PRTNO_3748 0x00490000 // LM3S3748
|
|
#define SYSCTL_DID1_PRTNO_3749 0x00450000 // LM3S3749
|
|
#define SYSCTL_DID1_PRTNO_3826 0x00420000 // LM3S3826
|
|
#define SYSCTL_DID1_PRTNO_3J26 0x00410000 // LM3S3J26
|
|
#define SYSCTL_DID1_PRTNO_3N26 0x00400000 // LM3S3N26
|
|
#define SYSCTL_DID1_PRTNO_3W26 0x003F0000 // LM3S3W26
|
|
#define SYSCTL_DID1_PRTNO_3Z26 0x003E0000 // LM3S3Z26
|
|
#define SYSCTL_DID1_PRTNO_5632 0x00810000 // LM3S5632
|
|
#define SYSCTL_DID1_PRTNO_5651 0x000C0000 // LM3S5651
|
|
#define SYSCTL_DID1_PRTNO_5652 0x008A0000 // LM3S5652
|
|
#define SYSCTL_DID1_PRTNO_5656 0x004D0000 // LM3S5656
|
|
#define SYSCTL_DID1_PRTNO_5662 0x00910000 // LM3S5662
|
|
#define SYSCTL_DID1_PRTNO_5732 0x00960000 // LM3S5732
|
|
#define SYSCTL_DID1_PRTNO_5737 0x00970000 // LM3S5737
|
|
#define SYSCTL_DID1_PRTNO_5739 0x00A00000 // LM3S5739
|
|
#define SYSCTL_DID1_PRTNO_5747 0x00990000 // LM3S5747
|
|
#define SYSCTL_DID1_PRTNO_5749 0x00A70000 // LM3S5749
|
|
#define SYSCTL_DID1_PRTNO_5752 0x009A0000 // LM3S5752
|
|
#define SYSCTL_DID1_PRTNO_5762 0x009C0000 // LM3S5762
|
|
#define SYSCTL_DID1_PRTNO_5791 0x00690000 // LM3S5791
|
|
#define SYSCTL_DID1_PRTNO_5951 0x000B0000 // LM3S5951
|
|
#define SYSCTL_DID1_PRTNO_5956 0x004E0000 // LM3S5956
|
|
#define SYSCTL_DID1_PRTNO_5B91 0x00680000 // LM3S5B91
|
|
#define SYSCTL_DID1_PRTNO_5C31 0x002E0000 // LM3S5C31
|
|
#define SYSCTL_DID1_PRTNO_5C36 0x002C0000 // LM3S5C36
|
|
#define SYSCTL_DID1_PRTNO_5C51 0x005E0000 // LM3S5C51
|
|
#define SYSCTL_DID1_PRTNO_5C56 0x005B0000 // LM3S5C56
|
|
#define SYSCTL_DID1_PRTNO_5D51 0x005F0000 // LM3S5D51
|
|
#define SYSCTL_DID1_PRTNO_5D56 0x005C0000 // LM3S5D56
|
|
#define SYSCTL_DID1_PRTNO_5D91 0x00870000 // LM3S5D91
|
|
#define SYSCTL_DID1_PRTNO_5G31 0x002D0000 // LM3S5G31
|
|
#define SYSCTL_DID1_PRTNO_5G36 0x001F0000 // LM3S5G36
|
|
#define SYSCTL_DID1_PRTNO_5G51 0x005D0000 // LM3S5G51
|
|
#define SYSCTL_DID1_PRTNO_5G56 0x004F0000 // LM3S5G56
|
|
#define SYSCTL_DID1_PRTNO_5K31 0x00090000 // LM3S5K31
|
|
#define SYSCTL_DID1_PRTNO_5K36 0x004A0000 // LM3S5K36
|
|
#define SYSCTL_DID1_PRTNO_5P31 0x000A0000 // LM3S5P31
|
|
#define SYSCTL_DID1_PRTNO_5P36 0x00480000 // LM3S5P36
|
|
#define SYSCTL_DID1_PRTNO_5P3B 0x00B60000 // LM3S5P3B
|
|
#define SYSCTL_DID1_PRTNO_5P51 0x000D0000 // LM3S5P51
|
|
#define SYSCTL_DID1_PRTNO_5P56 0x004C0000 // LM3S5P56
|
|
#define SYSCTL_DID1_PRTNO_5R31 0x00070000 // LM3S5R31
|
|
#define SYSCTL_DID1_PRTNO_5R36 0x004B0000 // LM3S5R36
|
|
#define SYSCTL_DID1_PRTNO_5T36 0x00470000 // LM3S5T36
|
|
#define SYSCTL_DID1_PRTNO_5U91 0x007F0000 // LM3S5U91
|
|
#define SYSCTL_DID1_PRTNO_5Y36 0x00460000 // LM3S5Y36
|
|
#define SYSCTL_DID1_PRTNO_6100 0x00A10000 // LM3S6100
|
|
#define SYSCTL_DID1_PRTNO_6110 0x00740000 // LM3S6110
|
|
#define SYSCTL_DID1_PRTNO_6420 0x00A50000 // LM3S6420
|
|
#define SYSCTL_DID1_PRTNO_6422 0x00820000 // LM3S6422
|
|
#define SYSCTL_DID1_PRTNO_6432 0x00750000 // LM3S6432
|
|
#define SYSCTL_DID1_PRTNO_6537 0x00760000 // LM3S6537
|
|
#define SYSCTL_DID1_PRTNO_6610 0x00710000 // LM3S6610
|
|
#define SYSCTL_DID1_PRTNO_6611 0x00E70000 // LM3S6611
|
|
#define SYSCTL_DID1_PRTNO_6618 0x00E60000 // LM3S6618
|
|
#define SYSCTL_DID1_PRTNO_6633 0x00830000 // LM3S6633
|
|
#define SYSCTL_DID1_PRTNO_6637 0x008B0000 // LM3S6637
|
|
#define SYSCTL_DID1_PRTNO_6730 0x00A30000 // LM3S6730
|
|
#define SYSCTL_DID1_PRTNO_6753 0x00770000 // LM3S6753
|
|
#define SYSCTL_DID1_PRTNO_6816 0x00D10000 // LM3S6816
|
|
#define SYSCTL_DID1_PRTNO_6911 0x00E90000 // LM3S6911
|
|
#define SYSCTL_DID1_PRTNO_6916 0x00D30000 // LM3S6916
|
|
#define SYSCTL_DID1_PRTNO_6918 0x00E80000 // LM3S6918
|
|
#define SYSCTL_DID1_PRTNO_6938 0x00890000 // LM3S6938
|
|
#define SYSCTL_DID1_PRTNO_6950 0x00720000 // LM3S6950
|
|
#define SYSCTL_DID1_PRTNO_6952 0x00780000 // LM3S6952
|
|
#define SYSCTL_DID1_PRTNO_6965 0x00730000 // LM3S6965
|
|
#define SYSCTL_DID1_PRTNO_6C11 0x00AA0000 // LM3S6C11
|
|
#define SYSCTL_DID1_PRTNO_6C65 0x00AC0000 // LM3S6C65
|
|
#define SYSCTL_DID1_PRTNO_6G11 0x009F0000 // LM3S6G11
|
|
#define SYSCTL_DID1_PRTNO_6G65 0x00AB0000 // LM3S6G65
|
|
#define SYSCTL_DID1_PRTNO_8530 0x00640000 // LM3S8530
|
|
#define SYSCTL_DID1_PRTNO_8538 0x008E0000 // LM3S8538
|
|
#define SYSCTL_DID1_PRTNO_8630 0x00610000 // LM3S8630
|
|
#define SYSCTL_DID1_PRTNO_8730 0x00630000 // LM3S8730
|
|
#define SYSCTL_DID1_PRTNO_8733 0x008D0000 // LM3S8733
|
|
#define SYSCTL_DID1_PRTNO_8738 0x00860000 // LM3S8738
|
|
#define SYSCTL_DID1_PRTNO_8930 0x00650000 // LM3S8930
|
|
#define SYSCTL_DID1_PRTNO_8933 0x008C0000 // LM3S8933
|
|
#define SYSCTL_DID1_PRTNO_8938 0x00880000 // LM3S8938
|
|
#define SYSCTL_DID1_PRTNO_8962 0x00A60000 // LM3S8962
|
|
#define SYSCTL_DID1_PRTNO_8970 0x00620000 // LM3S8970
|
|
#define SYSCTL_DID1_PRTNO_8971 0x00D70000 // LM3S8971
|
|
#define SYSCTL_DID1_PRTNO_8C62 0x00AE0000 // LM3S8C62
|
|
#define SYSCTL_DID1_PRTNO_8G62 0x00AD0000 // LM3S8G62
|
|
#define SYSCTL_DID1_PRTNO_9781 0x00CF0000 // LM3S9781
|
|
#define SYSCTL_DID1_PRTNO_9790 0x00670000 // LM3S9790
|
|
#define SYSCTL_DID1_PRTNO_9792 0x006B0000 // LM3S9792
|
|
#define SYSCTL_DID1_PRTNO_9971 0x002D0000 // LM3S9971
|
|
#define SYSCTL_DID1_PRTNO_9997 0x00200000 // LM3S9997
|
|
#define SYSCTL_DID1_PRTNO_9B81 0x00D00000 // LM3S9B81
|
|
#define SYSCTL_DID1_PRTNO_9B90 0x00660000 // LM3S9B90
|
|
#define SYSCTL_DID1_PRTNO_9B92 0x006A0000 // LM3S9B92
|
|
#define SYSCTL_DID1_PRTNO_9B95 0x006E0000 // LM3S9B95
|
|
#define SYSCTL_DID1_PRTNO_9B96 0x006F0000 // LM3S9B96
|
|
#define SYSCTL_DID1_PRTNO_9BN2 0x001D0000 // LM3S9BN2
|
|
#define SYSCTL_DID1_PRTNO_9BN5 0x001E0000 // LM3S9BN5
|
|
#define SYSCTL_DID1_PRTNO_9BN6 0x001F0000 // LM3S9BN6
|
|
#define SYSCTL_DID1_PRTNO_9C97 0x00700000 // LM3S9C97
|
|
#define SYSCTL_DID1_PRTNO_9CN5 0x007A0000 // LM3S9CN5
|
|
#define SYSCTL_DID1_PRTNO_9D81 0x00A90000 // LM3S9D81
|
|
#define SYSCTL_DID1_PRTNO_9D90 0x007E0000 // LM3S9D90
|
|
#define SYSCTL_DID1_PRTNO_9D92 0x00920000 // LM3S9D92
|
|
#define SYSCTL_DID1_PRTNO_9D95 0x00C80000 // LM3S9D95
|
|
#define SYSCTL_DID1_PRTNO_9D96 0x009D0000 // LM3S9D96
|
|
#define SYSCTL_DID1_PRTNO_9DN5 0x007B0000 // LM3S9DN5
|
|
#define SYSCTL_DID1_PRTNO_9DN6 0x007C0000 // LM3S9DN6
|
|
#define SYSCTL_DID1_PRTNO_9G97 0x00600000 // LM3S9G97
|
|
#define SYSCTL_DID1_PRTNO_9GN5 0x00790000 // LM3S9GN5
|
|
#define SYSCTL_DID1_PRTNO_9L71 0x001B0000 // LM3S9L71
|
|
#define SYSCTL_DID1_PRTNO_9L97 0x00180000 // LM3S9L97
|
|
#define SYSCTL_DID1_PRTNO_9U81 0x00A80000 // LM3S9U81
|
|
#define SYSCTL_DID1_PRTNO_9U90 0x007D0000 // LM3S9U90
|
|
#define SYSCTL_DID1_PRTNO_9U92 0x00900000 // LM3S9U92
|
|
#define SYSCTL_DID1_PRTNO_9U95 0x00B70000 // LM3S9U95
|
|
#define SYSCTL_DID1_PRTNO_9U96 0x009B0000 // LM3S9U96
|
|
#define SYSCTL_DID1_PRTNO_LM4F110B2QR \
|
|
0x00180000 // LM4F110B2QR
|
|
#define SYSCTL_DID1_PRTNO_LM4F110C4QR \
|
|
0x00190000 // LM4F110C4QR
|
|
#define SYSCTL_DID1_PRTNO_LM4F110E5QR \
|
|
0x00100000 // LM4F110E5QR
|
|
#define SYSCTL_DID1_PRTNO_LM4F110H5QR \
|
|
0x00110000 // LM4F110H5QR
|
|
#define SYSCTL_DID1_PRTNO_LM4F111B2QR \
|
|
0x00220000 // LM4F111B2QR
|
|
#define SYSCTL_DID1_PRTNO_LM4F111C4QR \
|
|
0x00230000 // LM4F111C4QR
|
|
#define SYSCTL_DID1_PRTNO_LM4F111E5QR \
|
|
0x00200000 // LM4F111E5QR
|
|
#define SYSCTL_DID1_PRTNO_LM4F111H5QR \
|
|
0x00210000 // LM4F111H5QR
|
|
#define SYSCTL_DID1_PRTNO_LM4F112C4QC \
|
|
0x00360000 // LM4F112C4QC
|
|
#define SYSCTL_DID1_PRTNO_LM4F112E5QC \
|
|
0x00300000 // LM4F112E5QC
|
|
#define SYSCTL_DID1_PRTNO_LM4F112H5QC \
|
|
0x00310000 // LM4F112H5QC
|
|
#define SYSCTL_DID1_PRTNO_LM4F112H5QD \
|
|
0x00350000 // LM4F112H5QD
|
|
#define SYSCTL_DID1_PRTNO_LM4F120B2QR \
|
|
0x00010000 // LM4F120B2QR
|
|
#define SYSCTL_DID1_PRTNO_LM4F120C4QR \
|
|
0x00020000 // LM4F120C4QR
|
|
#define SYSCTL_DID1_PRTNO_LM4F120E5QR \
|
|
0x00030000 // LM4F120E5QR
|
|
#define SYSCTL_DID1_PRTNO_LM4F120H5QR \
|
|
0x00040000 // LM4F120H5QR
|
|
#define SYSCTL_DID1_PRTNO_LM4F121B2QR \
|
|
0x00080000 // LM4F121B2QR
|
|
#define SYSCTL_DID1_PRTNO_LM4F121C4QR \
|
|
0x00090000 // LM4F121C4QR
|
|
#define SYSCTL_DID1_PRTNO_LM4F121E5QR \
|
|
0x000A0000 // LM4F121E5QR
|
|
#define SYSCTL_DID1_PRTNO_LM4F121H5QR \
|
|
0x000B0000 // LM4F121H5QR
|
|
#define SYSCTL_DID1_PRTNO_LM4F122C4QC \
|
|
0x00D00000 // LM4F122C4QC
|
|
#define SYSCTL_DID1_PRTNO_LM4F122E5QC \
|
|
0x00D10000 // LM4F122E5QC
|
|
#define SYSCTL_DID1_PRTNO_LM4F122H5QC \
|
|
0x00D20000 // LM4F122H5QC
|
|
#define SYSCTL_DID1_PRTNO_LM4F122H5QD \
|
|
0x00D60000 // LM4F122H5QD
|
|
#define SYSCTL_DID1_PRTNO_LM4F130C4QR \
|
|
0x00480000 // LM4F130C4QR
|
|
#define SYSCTL_DID1_PRTNO_LM4F130E5QR \
|
|
0x00400000 // LM4F130E5QR
|
|
#define SYSCTL_DID1_PRTNO_LM4F130H5QR \
|
|
0x00410000 // LM4F130H5QR
|
|
#define SYSCTL_DID1_PRTNO_LM4F131C4QR \
|
|
0x00520000 // LM4F131C4QR
|
|
#define SYSCTL_DID1_PRTNO_LM4F131E5QR \
|
|
0x00500000 // LM4F131E5QR
|
|
#define SYSCTL_DID1_PRTNO_LM4F131H5QR \
|
|
0x00510000 // LM4F131H5QR
|
|
#define SYSCTL_DID1_PRTNO_LM4F132C4QC \
|
|
0x00660000 // LM4F132C4QC
|
|
#define SYSCTL_DID1_PRTNO_LM4F132E5QC \
|
|
0x00600000 // LM4F132E5QC
|
|
#define SYSCTL_DID1_PRTNO_LM4F132H5QC \
|
|
0x00610000 // LM4F132H5QC
|
|
#define SYSCTL_DID1_PRTNO_LM4F132H5QD \
|
|
0x00650000 // LM4F132H5QD
|
|
#define SYSCTL_DID1_PRTNO_LM4F230E5QR \
|
|
0x00A00000 // LM4F230E5QR
|
|
#define SYSCTL_DID1_PRTNO_LM4F230H5QR \
|
|
0x00A10000 // LM4F230H5QR
|
|
#define SYSCTL_DID1_PRTNO_LM4F231E5QR \
|
|
0x00B00000 // LM4F231E5QR
|
|
#define SYSCTL_DID1_PRTNO_LM4F231H5QR \
|
|
0x00B10000 // LM4F231H5QR
|
|
#define SYSCTL_DID1_PRTNO_LM4F232E5QC \
|
|
0x00C00000 // LM4F232E5QC
|
|
#define SYSCTL_DID1_PRTNO_LM4F232H5BB \
|
|
0x00E30000 // LM4F232H5BB
|
|
#define SYSCTL_DID1_PRTNO_LM4F232H5QC \
|
|
0x00C10000 // LM4F232H5QC
|
|
#define SYSCTL_DID1_PRTNO_LM4F232H5QD \
|
|
0x00C50000 // LM4F232H5QD
|
|
#define SYSCTL_DID1_PRTNO_LM4FS1AH5BB \
|
|
0x00E50000 // LM4FS1AH5BB
|
|
#define SYSCTL_DID1_PRTNO_LM4FS99H5BB \
|
|
0x00E40000 // LM4FS99H5BB
|
|
#define SYSCTL_DID1_PRTNO_LM4FSXAH5BB \
|
|
0x00E00000 // LM4FSXAH5BB
|
|
#define SYSCTL_DID1_PINCNT_M 0x0000E000 // Package Pin Count
|
|
#define SYSCTL_DID1_PINCNT_28 0x00000000 // 28 pin package
|
|
#define SYSCTL_DID1_PINCNT_48 0x00002000 // 48-pin package
|
|
#define SYSCTL_DID1_PINCNT_100 0x00004000 // 100-pin package
|
|
#define SYSCTL_DID1_PINCNT_64 0x00006000 // 64-pin package
|
|
#define SYSCTL_DID1_PINCNT_144 0x00008000 // 144-pin package
|
|
#define SYSCTL_DID1_PINCNT_157 0x0000A000 // 157-pin package
|
|
#define SYSCTL_DID1_TEMP_M 0x000000E0 // Temperature Range
|
|
#define SYSCTL_DID1_TEMP_C 0x00000000 // Commercial temperature range (0C
|
|
// to 70C)
|
|
#define SYSCTL_DID1_TEMP_I 0x00000020 // Industrial temperature range
|
|
// (-40C to 85C)
|
|
#define SYSCTL_DID1_TEMP_E 0x00000040 // Extended temperature range (-40C
|
|
// to 105C)
|
|
#define SYSCTL_DID1_PKG_M 0x00000018 // Package Type
|
|
#define SYSCTL_DID1_PKG_SOIC 0x00000000 // SOIC package
|
|
#define SYSCTL_DID1_PKG_QFP 0x00000008 // LQFP package
|
|
#define SYSCTL_DID1_PKG_BGA 0x00000010 // BGA package
|
|
#define SYSCTL_DID1_PKG_QFN 0x00000018 // QFN package
|
|
#define SYSCTL_DID1_ROHS 0x00000004 // RoHS-Compliance
|
|
#define SYSCTL_DID1_QUAL_M 0x00000003 // Qualification Status
|
|
#define SYSCTL_DID1_QUAL_ES 0x00000000 // Engineering Sample (unqualified)
|
|
#define SYSCTL_DID1_QUAL_PP 0x00000001 // Pilot Production (unqualified)
|
|
#define SYSCTL_DID1_QUAL_FQ 0x00000002 // Fully Qualified
|
|
#define SYSCTL_DID1_PRTNO_S 16 // Part number shift
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DC0 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DC0_SRAMSZ_M 0xFFFF0000 // SRAM Size
|
|
#define SYSCTL_DC0_SRAMSZ_2KB 0x00070000 // 2 KB of SRAM
|
|
#define SYSCTL_DC0_SRAMSZ_4KB 0x000F0000 // 4 KB of SRAM
|
|
#define SYSCTL_DC0_SRAMSZ_6KB 0x00170000 // 6 KB of SRAM
|
|
#define SYSCTL_DC0_SRAMSZ_8KB 0x001F0000 // 8 KB of SRAM
|
|
#define SYSCTL_DC0_SRAMSZ_12KB 0x002F0000 // 12 KB of SRAM
|
|
#define SYSCTL_DC0_SRAMSZ_16KB 0x003F0000 // 16 KB of SRAM
|
|
#define SYSCTL_DC0_SRAMSZ_20KB 0x004F0000 // 20 KB of SRAM
|
|
#define SYSCTL_DC0_SRAMSZ_24KB 0x005F0000 // 24 KB of SRAM
|
|
#define SYSCTL_DC0_SRAMSZ_32KB 0x007F0000 // 32 KB of SRAM
|
|
#define SYSCTL_DC0_SRAMSZ_48KB 0x00BF0000 // 48 KB of SRAM
|
|
#define SYSCTL_DC0_SRAMSZ_64KB 0x00FF0000 // 64 KB of SRAM
|
|
#define SYSCTL_DC0_SRAMSZ_96KB 0x017F0000 // 96 KB of SRAM
|
|
#define SYSCTL_DC0_FLASHSZ_M 0x0000FFFF // Flash Size
|
|
#define SYSCTL_DC0_FLASHSZ_8KB 0x00000003 // 8 KB of Flash
|
|
#define SYSCTL_DC0_FLASHSZ_16KB 0x00000007 // 16 KB of Flash
|
|
#define SYSCTL_DC0_FLASHSZ_32KB 0x0000000F // 32 KB of Flash
|
|
#define SYSCTL_DC0_FLASHSZ_64KB 0x0000001F // 64 KB of Flash
|
|
#define SYSCTL_DC0_FLASHSZ_96KB 0x0000002F // 96 KB of Flash
|
|
#define SYSCTL_DC0_FLASHSZ_128K 0x0000003F // 128 KB of Flash
|
|
#define SYSCTL_DC0_FLASHSZ_192K 0x0000005F // 192 KB of Flash
|
|
#define SYSCTL_DC0_FLASHSZ_256K 0x0000007F // 256 KB of Flash
|
|
#define SYSCTL_DC0_FLASHSZ_384K 0x000000BF // 384 KB of Flash
|
|
#define SYSCTL_DC0_FLASHSZ_512K 0x000000FF // 512 KB of Flash
|
|
#define SYSCTL_DC0_SRAMSZ_S 16 // SRAM size shift
|
|
#define SYSCTL_DC0_FLASHSZ_S 0 // Flash size shift
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DC1 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DC1_WDT1 0x10000000 // Watchdog Timer1 Present
|
|
#define SYSCTL_DC1_CAN2 0x04000000 // CAN Module 2 Present
|
|
#define SYSCTL_DC1_CAN1 0x02000000 // CAN Module 1 Present
|
|
#define SYSCTL_DC1_CAN0 0x01000000 // CAN Module 0 Present
|
|
#define SYSCTL_DC1_PWM1 0x00200000 // PWM Module 1 Present
|
|
#define SYSCTL_DC1_PWM0 0x00100000 // PWM Module 0 Present
|
|
#define SYSCTL_DC1_ADC1 0x00020000 // ADC Module 1 Present
|
|
#define SYSCTL_DC1_ADC0 0x00010000 // ADC Module 0 Present
|
|
#define SYSCTL_DC1_MINSYSDIV_M 0x0000F000 // System Clock Divider
|
|
#define SYSCTL_DC1_MINSYSDIV_100 \
|
|
0x00001000 // Divide VCO (400MHZ) by 5 minimum
|
|
#define SYSCTL_DC1_MINSYSDIV_66 0x00002000 // Divide VCO (400MHZ) by 2*2 + 2 =
|
|
// 6 minimum
|
|
#define SYSCTL_DC1_MINSYSDIV_50 0x00003000 // Specifies a 50-MHz CPU clock
|
|
// with a PLL divider of 4
|
|
#define SYSCTL_DC1_MINSYSDIV_40 0x00004000 // Specifies a 40-MHz CPU clock
|
|
// with a PLL divider of 5
|
|
#define SYSCTL_DC1_MINSYSDIV_25 0x00007000 // Specifies a 25-MHz clock with a
|
|
// PLL divider of 8
|
|
#define SYSCTL_DC1_MINSYSDIV_20 0x00009000 // Specifies a 20-MHz clock with a
|
|
// PLL divider of 10
|
|
#define SYSCTL_DC1_ADC1SPD_M 0x00000C00 // Max ADC1 Speed
|
|
#define SYSCTL_DC1_ADC1SPD_125K 0x00000000 // 125K samples/second
|
|
#define SYSCTL_DC1_ADC1SPD_250K 0x00000400 // 250K samples/second
|
|
#define SYSCTL_DC1_ADC1SPD_500K 0x00000800 // 500K samples/second
|
|
#define SYSCTL_DC1_ADC1SPD_1M 0x00000C00 // 1M samples/second
|
|
#define SYSCTL_DC1_ADC0SPD_M 0x00000300 // Max ADC0 Speed
|
|
#define SYSCTL_DC1_ADC0SPD_125K 0x00000000 // 125K samples/second
|
|
#define SYSCTL_DC1_ADC0SPD_250K 0x00000100 // 250K samples/second
|
|
#define SYSCTL_DC1_ADC0SPD_500K 0x00000200 // 500K samples/second
|
|
#define SYSCTL_DC1_ADC0SPD_1M 0x00000300 // 1M samples/second
|
|
#define SYSCTL_DC1_MPU 0x00000080 // MPU Present
|
|
#define SYSCTL_DC1_HIB 0x00000040 // Hibernation Module Present
|
|
#define SYSCTL_DC1_TEMP 0x00000020 // Temp Sensor Present
|
|
#define SYSCTL_DC1_PLL 0x00000010 // PLL Present
|
|
#define SYSCTL_DC1_WDT0 0x00000008 // Watchdog Timer 0 Present
|
|
#define SYSCTL_DC1_SWO 0x00000004 // SWO Trace Port Present
|
|
#define SYSCTL_DC1_SWD 0x00000002 // SWD Present
|
|
#define SYSCTL_DC1_JTAG 0x00000001 // JTAG Present
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DC2 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DC2_EPI0 0x40000000 // EPI Module 0 Present
|
|
#define SYSCTL_DC2_I2S0 0x10000000 // I2S Module 0 Present
|
|
#define SYSCTL_DC2_COMP2 0x04000000 // Analog Comparator 2 Present
|
|
#define SYSCTL_DC2_COMP1 0x02000000 // Analog Comparator 1 Present
|
|
#define SYSCTL_DC2_COMP0 0x01000000 // Analog Comparator 0 Present
|
|
#define SYSCTL_DC2_TIMER3 0x00080000 // Timer Module 3 Present
|
|
#define SYSCTL_DC2_TIMER2 0x00040000 // Timer Module 2 Present
|
|
#define SYSCTL_DC2_TIMER1 0x00020000 // Timer Module 1 Present
|
|
#define SYSCTL_DC2_TIMER0 0x00010000 // Timer Module 0 Present
|
|
#define SYSCTL_DC2_I2C1HS 0x00008000 // I2C Module 1 Speed
|
|
#define SYSCTL_DC2_I2C1 0x00004000 // I2C Module 1 Present
|
|
#define SYSCTL_DC2_I2C0HS 0x00002000 // I2C Module 0 Speed
|
|
#define SYSCTL_DC2_I2C0 0x00001000 // I2C Module 0 Present
|
|
#define SYSCTL_DC2_QEI1 0x00000200 // QEI Module 1 Present
|
|
#define SYSCTL_DC2_QEI0 0x00000100 // QEI Module 0 Present
|
|
#define SYSCTL_DC2_SSI1 0x00000020 // SSI Module 1 Present
|
|
#define SYSCTL_DC2_SSI0 0x00000010 // SSI Module 0 Present
|
|
#define SYSCTL_DC2_UART2 0x00000004 // UART Module 2 Present
|
|
#define SYSCTL_DC2_UART1 0x00000002 // UART Module 1 Present
|
|
#define SYSCTL_DC2_UART0 0x00000001 // UART Module 0 Present
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DC3 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DC3_32KHZ 0x80000000 // 32KHz Input Clock Available
|
|
#define SYSCTL_DC3_CCP5 0x20000000 // CCP5 Pin Present
|
|
#define SYSCTL_DC3_CCP4 0x10000000 // CCP4 Pin Present
|
|
#define SYSCTL_DC3_CCP3 0x08000000 // CCP3 Pin Present
|
|
#define SYSCTL_DC3_CCP2 0x04000000 // CCP2 Pin Present
|
|
#define SYSCTL_DC3_CCP1 0x02000000 // CCP1 Pin Present
|
|
#define SYSCTL_DC3_CCP0 0x01000000 // CCP0 Pin Present
|
|
#define SYSCTL_DC3_ADC0AIN7 0x00800000 // ADC Module 0 AIN7 Pin Present
|
|
#define SYSCTL_DC3_ADC0AIN6 0x00400000 // ADC Module 0 AIN6 Pin Present
|
|
#define SYSCTL_DC3_ADC0AIN5 0x00200000 // ADC Module 0 AIN5 Pin Present
|
|
#define SYSCTL_DC3_ADC0AIN4 0x00100000 // ADC Module 0 AIN4 Pin Present
|
|
#define SYSCTL_DC3_ADC0AIN3 0x00080000 // ADC Module 0 AIN3 Pin Present
|
|
#define SYSCTL_DC3_ADC0AIN2 0x00040000 // ADC Module 0 AIN2 Pin Present
|
|
#define SYSCTL_DC3_ADC0AIN1 0x00020000 // ADC Module 0 AIN1 Pin Present
|
|
#define SYSCTL_DC3_ADC0AIN0 0x00010000 // ADC Module 0 AIN0 Pin Present
|
|
#define SYSCTL_DC3_PWMFAULT 0x00008000 // PWM Fault Pin Present
|
|
#define SYSCTL_DC3_C2O 0x00004000 // C2o Pin Present
|
|
#define SYSCTL_DC3_C2PLUS 0x00002000 // C2+ Pin Present
|
|
#define SYSCTL_DC3_C2MINUS 0x00001000 // C2- Pin Present
|
|
#define SYSCTL_DC3_C1O 0x00000800 // C1o Pin Present
|
|
#define SYSCTL_DC3_C1PLUS 0x00000400 // C1+ Pin Present
|
|
#define SYSCTL_DC3_C1MINUS 0x00000200 // C1- Pin Present
|
|
#define SYSCTL_DC3_C0O 0x00000100 // C0o Pin Present
|
|
#define SYSCTL_DC3_C0PLUS 0x00000080 // C0+ Pin Present
|
|
#define SYSCTL_DC3_C0MINUS 0x00000040 // C0- Pin Present
|
|
#define SYSCTL_DC3_PWM5 0x00000020 // PWM5 Pin Present
|
|
#define SYSCTL_DC3_PWM4 0x00000010 // PWM4 Pin Present
|
|
#define SYSCTL_DC3_PWM3 0x00000008 // PWM3 Pin Present
|
|
#define SYSCTL_DC3_PWM2 0x00000004 // PWM2 Pin Present
|
|
#define SYSCTL_DC3_PWM1 0x00000002 // PWM1 Pin Present
|
|
#define SYSCTL_DC3_PWM0 0x00000001 // PWM0 Pin Present
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DC4 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DC4_ETH 0x50000000 // Ethernet present
|
|
#define SYSCTL_DC4_EPHY0 0x40000000 // Ethernet PHY Layer 0 Present
|
|
#define SYSCTL_DC4_EMAC0 0x10000000 // Ethernet MAC Layer 0 Present
|
|
#define SYSCTL_DC4_E1588 0x01000000 // 1588 Capable
|
|
#define SYSCTL_DC4_PICAL 0x00040000 // PIOSC Calibrate
|
|
#define SYSCTL_DC4_CCP7 0x00008000 // CCP7 Pin Present
|
|
#define SYSCTL_DC4_CCP6 0x00004000 // CCP6 Pin Present
|
|
#define SYSCTL_DC4_UDMA 0x00002000 // Micro-DMA Module Present
|
|
#define SYSCTL_DC4_ROM 0x00001000 // Internal Code ROM Present
|
|
#define SYSCTL_DC4_GPIOJ 0x00000100 // GPIO Port J Present
|
|
#define SYSCTL_DC4_GPIOH 0x00000080 // GPIO Port H Present
|
|
#define SYSCTL_DC4_GPIOG 0x00000040 // GPIO Port G Present
|
|
#define SYSCTL_DC4_GPIOF 0x00000020 // GPIO Port F Present
|
|
#define SYSCTL_DC4_GPIOE 0x00000010 // GPIO Port E Present
|
|
#define SYSCTL_DC4_GPIOD 0x00000008 // GPIO Port D Present
|
|
#define SYSCTL_DC4_GPIOC 0x00000004 // GPIO Port C Present
|
|
#define SYSCTL_DC4_GPIOB 0x00000002 // GPIO Port B Present
|
|
#define SYSCTL_DC4_GPIOA 0x00000001 // GPIO Port A Present
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DC5 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DC5_PWMFAULT3 0x08000000 // PWM Fault 3 Pin Present
|
|
#define SYSCTL_DC5_PWMFAULT2 0x04000000 // PWM Fault 2 Pin Present
|
|
#define SYSCTL_DC5_PWMFAULT1 0x02000000 // PWM Fault 1 Pin Present
|
|
#define SYSCTL_DC5_PWMFAULT0 0x01000000 // PWM Fault 0 Pin Present
|
|
#define SYSCTL_DC5_PWMEFLT 0x00200000 // PWM Extended Fault Active
|
|
#define SYSCTL_DC5_PWMESYNC 0x00100000 // PWM Extended SYNC Active
|
|
#define SYSCTL_DC5_PWM7 0x00000080 // PWM7 Pin Present
|
|
#define SYSCTL_DC5_PWM6 0x00000040 // PWM6 Pin Present
|
|
#define SYSCTL_DC5_PWM5 0x00000020 // PWM5 Pin Present
|
|
#define SYSCTL_DC5_PWM4 0x00000010 // PWM4 Pin Present
|
|
#define SYSCTL_DC5_PWM3 0x00000008 // PWM3 Pin Present
|
|
#define SYSCTL_DC5_PWM2 0x00000004 // PWM2 Pin Present
|
|
#define SYSCTL_DC5_PWM1 0x00000002 // PWM1 Pin Present
|
|
#define SYSCTL_DC5_PWM0 0x00000001 // PWM0 Pin Present
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DC6 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DC6_USB0PHY 0x00000010 // USB Module 0 PHY Present
|
|
#define SYSCTL_DC6_USB0_M 0x00000003 // USB Module 0 Present
|
|
#define SYSCTL_DC6_USB0_DEV 0x00000001 // USB0 is Device Only
|
|
#define SYSCTL_DC6_USB0_HOSTDEV 0x00000002 // USB is Device or Host
|
|
#define SYSCTL_DC6_USB0_OTG 0x00000003 // USB0 is OTG
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DC7 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DC7_SW 0x40000000 // Software transfer on uDMA Ch30
|
|
#define SYSCTL_DC7_DMACH30 0x40000000 // SW
|
|
#define SYSCTL_DC7_DMACH29 0x20000000 // I2S0_TX / CAN1_TX
|
|
#define SYSCTL_DC7_DMACH28 0x10000000 // I2S0_RX / CAN1_RX
|
|
#define SYSCTL_DC7_DMACH27 0x08000000 // CAN1_TX / ADC1_SS3
|
|
#define SYSCTL_DC7_DMACH26 0x04000000 // CAN1_RX / ADC1_SS2
|
|
#define SYSCTL_DC7_DMACH25 0x02000000 // SSI1_TX / ADC1_SS1
|
|
#define SYSCTL_DC7_SSI1_TX 0x02000000 // SSI1 TX on uDMA Ch25
|
|
#define SYSCTL_DC7_SSI1_RX 0x01000000 // SSI1 RX on uDMA Ch24
|
|
#define SYSCTL_DC7_DMACH24 0x01000000 // SSI1_RX / ADC1_SS0
|
|
#define SYSCTL_DC7_UART1_TX 0x00800000 // UART1 TX on uDMA Ch23
|
|
#define SYSCTL_DC7_DMACH23 0x00800000 // UART1_TX / CAN2_TX
|
|
#define SYSCTL_DC7_DMACH22 0x00400000 // UART1_RX / CAN2_RX
|
|
#define SYSCTL_DC7_UART1_RX 0x00400000 // UART1 RX on uDMA Ch22
|
|
#define SYSCTL_DC7_DMACH21 0x00200000 // Timer1B / EPI0_WFIFO
|
|
#define SYSCTL_DC7_DMACH20 0x00100000 // Timer1A / EPI0_NBRFIFO
|
|
#define SYSCTL_DC7_DMACH19 0x00080000 // Timer0B / Timer1B
|
|
#define SYSCTL_DC7_DMACH18 0x00040000 // Timer0A / Timer1A
|
|
#define SYSCTL_DC7_DMACH17 0x00020000 // ADC0_SS3
|
|
#define SYSCTL_DC7_DMACH16 0x00010000 // ADC0_SS2
|
|
#define SYSCTL_DC7_DMACH15 0x00008000 // ADC0_SS1 / Timer2B
|
|
#define SYSCTL_DC7_DMACH14 0x00004000 // ADC0_SS0 / Timer2A
|
|
#define SYSCTL_DC7_DMACH13 0x00002000 // CAN0_TX / UART2_TX
|
|
#define SYSCTL_DC7_DMACH12 0x00001000 // CAN0_RX / UART2_RX
|
|
#define SYSCTL_DC7_SSI0_TX 0x00000800 // SSI0 TX on uDMA Ch11
|
|
#define SYSCTL_DC7_DMACH11 0x00000800 // SSI0_TX / SSI1_TX
|
|
#define SYSCTL_DC7_SSI0_RX 0x00000400 // SSI0 RX on uDMA Ch10
|
|
#define SYSCTL_DC7_DMACH10 0x00000400 // SSI0_RX / SSI1_RX
|
|
#define SYSCTL_DC7_UART0_TX 0x00000200 // UART0 TX on uDMA Ch9
|
|
#define SYSCTL_DC7_DMACH9 0x00000200 // UART0_TX / UART1_TX
|
|
#define SYSCTL_DC7_DMACH8 0x00000100 // UART0_RX / UART1_RX
|
|
#define SYSCTL_DC7_UART0_RX 0x00000100 // UART0 RX on uDMA Ch8
|
|
#define SYSCTL_DC7_DMACH7 0x00000080 // ETH_TX / Timer2B
|
|
#define SYSCTL_DC7_DMACH6 0x00000040 // ETH_RX / Timer2A
|
|
#define SYSCTL_DC7_DMACH5 0x00000020 // USB_EP3_TX / Timer2B
|
|
#define SYSCTL_DC7_USB_EP3_TX 0x00000020 // USB EP3 TX on uDMA Ch5
|
|
#define SYSCTL_DC7_USB_EP3_RX 0x00000010 // USB EP3 RX on uDMA Ch4
|
|
#define SYSCTL_DC7_DMACH4 0x00000010 // USB_EP3_RX / Timer2A
|
|
#define SYSCTL_DC7_USB_EP2_TX 0x00000008 // USB EP2 TX on uDMA Ch3
|
|
#define SYSCTL_DC7_DMACH3 0x00000008 // USB_EP2_TX / Timer3B
|
|
#define SYSCTL_DC7_USB_EP2_RX 0x00000004 // USB EP2 RX on uDMA Ch2
|
|
#define SYSCTL_DC7_DMACH2 0x00000004 // USB_EP2_RX / Timer3A
|
|
#define SYSCTL_DC7_USB_EP1_TX 0x00000002 // USB EP1 TX on uDMA Ch1
|
|
#define SYSCTL_DC7_DMACH1 0x00000002 // USB_EP1_TX / UART2_TX
|
|
#define SYSCTL_DC7_DMACH0 0x00000001 // USB_EP1_RX / UART2_RX
|
|
#define SYSCTL_DC7_USB_EP1_RX 0x00000001 // USB EP1 RX on uDMA Ch0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DC8 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DC8_ADC1AIN15 0x80000000 // ADC Module 1 AIN15 Pin Present
|
|
#define SYSCTL_DC8_ADC1AIN14 0x40000000 // ADC Module 1 AIN14 Pin Present
|
|
#define SYSCTL_DC8_ADC1AIN13 0x20000000 // ADC Module 1 AIN13 Pin Present
|
|
#define SYSCTL_DC8_ADC1AIN12 0x10000000 // ADC Module 1 AIN12 Pin Present
|
|
#define SYSCTL_DC8_ADC1AIN11 0x08000000 // ADC Module 1 AIN11 Pin Present
|
|
#define SYSCTL_DC8_ADC1AIN10 0x04000000 // ADC Module 1 AIN10 Pin Present
|
|
#define SYSCTL_DC8_ADC1AIN9 0x02000000 // ADC Module 1 AIN9 Pin Present
|
|
#define SYSCTL_DC8_ADC1AIN8 0x01000000 // ADC Module 1 AIN8 Pin Present
|
|
#define SYSCTL_DC8_ADC1AIN7 0x00800000 // ADC Module 1 AIN7 Pin Present
|
|
#define SYSCTL_DC8_ADC1AIN6 0x00400000 // ADC Module 1 AIN6 Pin Present
|
|
#define SYSCTL_DC8_ADC1AIN5 0x00200000 // ADC Module 1 AIN5 Pin Present
|
|
#define SYSCTL_DC8_ADC1AIN4 0x00100000 // ADC Module 1 AIN4 Pin Present
|
|
#define SYSCTL_DC8_ADC1AIN3 0x00080000 // ADC Module 1 AIN3 Pin Present
|
|
#define SYSCTL_DC8_ADC1AIN2 0x00040000 // ADC Module 1 AIN2 Pin Present
|
|
#define SYSCTL_DC8_ADC1AIN1 0x00020000 // ADC Module 1 AIN1 Pin Present
|
|
#define SYSCTL_DC8_ADC1AIN0 0x00010000 // ADC Module 1 AIN0 Pin Present
|
|
#define SYSCTL_DC8_ADC0AIN15 0x00008000 // ADC Module 0 AIN15 Pin Present
|
|
#define SYSCTL_DC8_ADC0AIN14 0x00004000 // ADC Module 0 AIN14 Pin Present
|
|
#define SYSCTL_DC8_ADC0AIN13 0x00002000 // ADC Module 0 AIN13 Pin Present
|
|
#define SYSCTL_DC8_ADC0AIN12 0x00001000 // ADC Module 0 AIN12 Pin Present
|
|
#define SYSCTL_DC8_ADC0AIN11 0x00000800 // ADC Module 0 AIN11 Pin Present
|
|
#define SYSCTL_DC8_ADC0AIN10 0x00000400 // ADC Module 0 AIN10 Pin Present
|
|
#define SYSCTL_DC8_ADC0AIN9 0x00000200 // ADC Module 0 AIN9 Pin Present
|
|
#define SYSCTL_DC8_ADC0AIN8 0x00000100 // ADC Module 0 AIN8 Pin Present
|
|
#define SYSCTL_DC8_ADC0AIN7 0x00000080 // ADC Module 0 AIN7 Pin Present
|
|
#define SYSCTL_DC8_ADC0AIN6 0x00000040 // ADC Module 0 AIN6 Pin Present
|
|
#define SYSCTL_DC8_ADC0AIN5 0x00000020 // ADC Module 0 AIN5 Pin Present
|
|
#define SYSCTL_DC8_ADC0AIN4 0x00000010 // ADC Module 0 AIN4 Pin Present
|
|
#define SYSCTL_DC8_ADC0AIN3 0x00000008 // ADC Module 0 AIN3 Pin Present
|
|
#define SYSCTL_DC8_ADC0AIN2 0x00000004 // ADC Module 0 AIN2 Pin Present
|
|
#define SYSCTL_DC8_ADC0AIN1 0x00000002 // ADC Module 0 AIN1 Pin Present
|
|
#define SYSCTL_DC8_ADC0AIN0 0x00000001 // ADC Module 0 AIN0 Pin Present
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PBORCTL register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PBORCTL_BORTIM_M 0x0000FFFC // BOR Time Delay
|
|
#define SYSCTL_PBORCTL_BORIOR 0x00000002 // BOR Interrupt or Reset
|
|
#define SYSCTL_PBORCTL_BORWT 0x00000001 // BOR Wait and Check for Noise
|
|
#define SYSCTL_PBORCTL_BORTIM_S 2
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_LDOPCTL register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_LDOPCTL_M 0x0000003F // LDO Output Voltage
|
|
#define SYSCTL_LDOPCTL_2_50V 0x00000000 // 2.50
|
|
#define SYSCTL_LDOPCTL_2_45V 0x00000001 // 2.45
|
|
#define SYSCTL_LDOPCTL_2_40V 0x00000002 // 2.40
|
|
#define SYSCTL_LDOPCTL_2_35V 0x00000003 // 2.35
|
|
#define SYSCTL_LDOPCTL_2_30V 0x00000004 // 2.30
|
|
#define SYSCTL_LDOPCTL_2_25V 0x00000005 // 2.25
|
|
#define SYSCTL_LDOPCTL_2_75V 0x0000001B // 2.75
|
|
#define SYSCTL_LDOPCTL_2_70V 0x0000001C // 2.70
|
|
#define SYSCTL_LDOPCTL_2_65V 0x0000001D // 2.65
|
|
#define SYSCTL_LDOPCTL_2_60V 0x0000001E // 2.60
|
|
#define SYSCTL_LDOPCTL_2_55V 0x0000001F // 2.55
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SRCR0 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SRCR0_WDT1 0x10000000 // WDT1 Reset Control
|
|
#define SYSCTL_SRCR0_CAN2 0x04000000 // CAN2 Reset Control
|
|
#define SYSCTL_SRCR0_CAN1 0x02000000 // CAN1 Reset Control
|
|
#define SYSCTL_SRCR0_CAN0 0x01000000 // CAN0 Reset Control
|
|
#define SYSCTL_SRCR0_PWM0 0x00100000 // PWM Reset Control
|
|
#define SYSCTL_SRCR0_ADC1 0x00020000 // ADC1 Reset Control
|
|
#define SYSCTL_SRCR0_ADC0 0x00010000 // ADC0 Reset Control
|
|
#define SYSCTL_SRCR0_HIB 0x00000040 // HIB Reset Control
|
|
#define SYSCTL_SRCR0_WDT0 0x00000008 // WDT0 Reset Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SRCR1 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SRCR1_EPI0 0x40000000 // EPI0 Reset Control
|
|
#define SYSCTL_SRCR1_I2S0 0x10000000 // I2S0 Reset Control
|
|
#define SYSCTL_SRCR1_COMP2 0x04000000 // Analog Comp 2 Reset Control
|
|
#define SYSCTL_SRCR1_COMP1 0x02000000 // Analog Comp 1 Reset Control
|
|
#define SYSCTL_SRCR1_COMP0 0x01000000 // Analog Comp 0 Reset Control
|
|
#define SYSCTL_SRCR1_TIMER3 0x00080000 // Timer 3 Reset Control
|
|
#define SYSCTL_SRCR1_TIMER2 0x00040000 // Timer 2 Reset Control
|
|
#define SYSCTL_SRCR1_TIMER1 0x00020000 // Timer 1 Reset Control
|
|
#define SYSCTL_SRCR1_TIMER0 0x00010000 // Timer 0 Reset Control
|
|
#define SYSCTL_SRCR1_I2C1 0x00004000 // I2C1 Reset Control
|
|
#define SYSCTL_SRCR1_I2C0 0x00001000 // I2C0 Reset Control
|
|
#define SYSCTL_SRCR1_QEI1 0x00000200 // QEI1 Reset Control
|
|
#define SYSCTL_SRCR1_QEI0 0x00000100 // QEI0 Reset Control
|
|
#define SYSCTL_SRCR1_SSI1 0x00000020 // SSI1 Reset Control
|
|
#define SYSCTL_SRCR1_SSI0 0x00000010 // SSI0 Reset Control
|
|
#define SYSCTL_SRCR1_UART2 0x00000004 // UART2 Reset Control
|
|
#define SYSCTL_SRCR1_UART1 0x00000002 // UART1 Reset Control
|
|
#define SYSCTL_SRCR1_UART0 0x00000001 // UART0 Reset Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SRCR2 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SRCR2_EPHY0 0x40000000 // PHY0 Reset Control
|
|
#define SYSCTL_SRCR2_EMAC0 0x10000000 // MAC0 Reset Control
|
|
#define SYSCTL_SRCR2_USB0 0x00010000 // USB0 Reset Control
|
|
#define SYSCTL_SRCR2_UDMA 0x00002000 // Micro-DMA Reset Control
|
|
#define SYSCTL_SRCR2_GPIOJ 0x00000100 // Port J Reset Control
|
|
#define SYSCTL_SRCR2_GPIOH 0x00000080 // Port H Reset Control
|
|
#define SYSCTL_SRCR2_GPIOG 0x00000040 // Port G Reset Control
|
|
#define SYSCTL_SRCR2_GPIOF 0x00000020 // Port F Reset Control
|
|
#define SYSCTL_SRCR2_GPIOE 0x00000010 // Port E Reset Control
|
|
#define SYSCTL_SRCR2_GPIOD 0x00000008 // Port D Reset Control
|
|
#define SYSCTL_SRCR2_GPIOC 0x00000004 // Port C Reset Control
|
|
#define SYSCTL_SRCR2_GPIOB 0x00000002 // Port B Reset Control
|
|
#define SYSCTL_SRCR2_GPIOA 0x00000001 // Port A Reset Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_RIS register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_RIS_MOSCPUPRIS 0x00000100 // MOSC Power Up Raw Interrupt
|
|
// Status
|
|
#define SYSCTL_RIS_USBPLLLRIS 0x00000080 // USB PLL Lock Raw Interrupt
|
|
// Status
|
|
#define SYSCTL_RIS_PLLLRIS 0x00000040 // PLL Lock Raw Interrupt Status
|
|
#define SYSCTL_RIS_CLRIS 0x00000020 // Current Limit Raw Interrupt
|
|
// Status
|
|
#define SYSCTL_RIS_IOFRIS 0x00000010 // Internal Oscillator Fault Raw
|
|
// Interrupt Status
|
|
#define SYSCTL_RIS_MOFRIS 0x00000008 // Main Oscillator Fault Raw
|
|
// Interrupt Status
|
|
#define SYSCTL_RIS_LDORIS 0x00000004 // LDO Power Unregulated Raw
|
|
// Interrupt Status
|
|
#define SYSCTL_RIS_BORRIS 0x00000002 // Brown-Out Reset Raw Interrupt
|
|
// Status
|
|
#define SYSCTL_RIS_PLLFRIS 0x00000001 // PLL Fault Raw Interrupt Status
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_IMC register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_IMC_MOSCPUPIM 0x00000100 // MOSC Power Up Interrupt Mask
|
|
#define SYSCTL_IMC_USBPLLLIM 0x00000080 // USB PLL Lock Interrupt Mask
|
|
#define SYSCTL_IMC_PLLLIM 0x00000040 // PLL Lock Interrupt Mask
|
|
#define SYSCTL_IMC_CLIM 0x00000020 // Current Limit Interrupt Mask
|
|
#define SYSCTL_IMC_IOFIM 0x00000010 // Internal Oscillator Fault
|
|
// Interrupt Mask
|
|
#define SYSCTL_IMC_MOFIM 0x00000008 // Main Oscillator Fault Interrupt
|
|
// Mask
|
|
#define SYSCTL_IMC_LDOIM 0x00000004 // LDO Power Unregulated Interrupt
|
|
// Mask
|
|
#define SYSCTL_IMC_BORIM 0x00000002 // Brown-Out Reset Interrupt Mask
|
|
#define SYSCTL_IMC_PLLFIM 0x00000001 // PLL Fault Interrupt Mask
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_MISC register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_MISC_MOSCPUPMIS 0x00000100 // MOSC Power Up Masked Interrupt
|
|
// Status
|
|
#define SYSCTL_MISC_USBPLLLMIS 0x00000080 // USB PLL Lock Masked Interrupt
|
|
// Status
|
|
#define SYSCTL_MISC_PLLLMIS 0x00000040 // PLL Lock Masked Interrupt Status
|
|
#define SYSCTL_MISC_CLMIS 0x00000020 // Current Limit Masked Interrupt
|
|
// Status
|
|
#define SYSCTL_MISC_IOFMIS 0x00000010 // Internal Oscillator Fault Masked
|
|
// Interrupt Status
|
|
#define SYSCTL_MISC_MOFMIS 0x00000008 // Main Oscillator Fault Masked
|
|
// Interrupt Status
|
|
#define SYSCTL_MISC_LDOMIS 0x00000004 // LDO Power Unregulated Masked
|
|
// Interrupt Status
|
|
#define SYSCTL_MISC_BORMIS 0x00000002 // BOR Masked Interrupt Status
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_RESC register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_RESC_MOSCFAIL 0x00010000 // MOSC Failure Reset
|
|
#define SYSCTL_RESC_LDO 0x00000020 // LDO Reset
|
|
#define SYSCTL_RESC_WDT1 0x00000020 // Watchdog Timer 1 Reset
|
|
#define SYSCTL_RESC_SW 0x00000010 // Software Reset
|
|
#define SYSCTL_RESC_WDT0 0x00000008 // Watchdog Timer 0 Reset
|
|
#define SYSCTL_RESC_BOR 0x00000004 // Brown-Out Reset
|
|
#define SYSCTL_RESC_POR 0x00000002 // Power-On Reset
|
|
#define SYSCTL_RESC_EXT 0x00000001 // External Reset
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_RCC register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_RCC_ACG 0x08000000 // Auto Clock Gating
|
|
#define SYSCTL_RCC_SYSDIV_M 0x07800000 // System Clock Divisor
|
|
#define SYSCTL_RCC_SYSDIV_2 0x00800000 // System clock /2
|
|
#define SYSCTL_RCC_SYSDIV_3 0x01000000 // System clock /3
|
|
#define SYSCTL_RCC_SYSDIV_4 0x01800000 // System clock /4
|
|
#define SYSCTL_RCC_SYSDIV_5 0x02000000 // System clock /5
|
|
#define SYSCTL_RCC_SYSDIV_6 0x02800000 // System clock /6
|
|
#define SYSCTL_RCC_SYSDIV_7 0x03000000 // System clock /7
|
|
#define SYSCTL_RCC_SYSDIV_8 0x03800000 // System clock /8
|
|
#define SYSCTL_RCC_SYSDIV_9 0x04000000 // System clock /9
|
|
#define SYSCTL_RCC_SYSDIV_10 0x04800000 // System clock /10
|
|
#define SYSCTL_RCC_SYSDIV_11 0x05000000 // System clock /11
|
|
#define SYSCTL_RCC_SYSDIV_12 0x05800000 // System clock /12
|
|
#define SYSCTL_RCC_SYSDIV_13 0x06000000 // System clock /13
|
|
#define SYSCTL_RCC_SYSDIV_14 0x06800000 // System clock /14
|
|
#define SYSCTL_RCC_SYSDIV_15 0x07000000 // System clock /15
|
|
#define SYSCTL_RCC_SYSDIV_16 0x07800000 // System clock /16
|
|
#define SYSCTL_RCC_USESYSDIV 0x00400000 // Enable System Clock Divider
|
|
#define SYSCTL_RCC_USEPWMDIV 0x00100000 // Enable PWM Clock Divisor
|
|
#define SYSCTL_RCC_PWMDIV_M 0x000E0000 // PWM Unit Clock Divisor
|
|
#define SYSCTL_RCC_PWMDIV_2 0x00000000 // PWM clock /2
|
|
#define SYSCTL_RCC_PWMDIV_4 0x00020000 // PWM clock /4
|
|
#define SYSCTL_RCC_PWMDIV_8 0x00040000 // PWM clock /8
|
|
#define SYSCTL_RCC_PWMDIV_16 0x00060000 // PWM clock /16
|
|
#define SYSCTL_RCC_PWMDIV_32 0x00080000 // PWM clock /32
|
|
#define SYSCTL_RCC_PWMDIV_64 0x000A0000 // PWM clock /64
|
|
#define SYSCTL_RCC_PWRDN 0x00002000 // PLL Power Down
|
|
#define SYSCTL_RCC_OEN 0x00001000 // PLL Output Enable
|
|
#define SYSCTL_RCC_BYPASS 0x00000800 // PLL Bypass
|
|
#define SYSCTL_RCC_XTAL_M 0x000007C0 // Crystal Value
|
|
#define SYSCTL_RCC_XTAL_1MHZ 0x00000000 // 1 MHz
|
|
#define SYSCTL_RCC_XTAL_1_84MHZ 0x00000040 // 1.8432 MHz
|
|
#define SYSCTL_RCC_XTAL_2MHZ 0x00000080 // 2 MHz
|
|
#define SYSCTL_RCC_XTAL_2_45MHZ 0x000000C0 // 2.4576 MHz
|
|
#define SYSCTL_RCC_XTAL_3_57MHZ 0x00000100 // 3.579545 MHz
|
|
#define SYSCTL_RCC_XTAL_3_68MHZ 0x00000140 // 3.6864 MHz
|
|
#define SYSCTL_RCC_XTAL_4MHZ 0x00000180 // 4 MHz
|
|
#define SYSCTL_RCC_XTAL_4_09MHZ 0x000001C0 // 4.096 MHz
|
|
#define SYSCTL_RCC_XTAL_4_91MHZ 0x00000200 // 4.9152 MHz
|
|
#define SYSCTL_RCC_XTAL_5MHZ 0x00000240 // 5 MHz
|
|
#define SYSCTL_RCC_XTAL_5_12MHZ 0x00000280 // 5.12 MHz
|
|
#define SYSCTL_RCC_XTAL_6MHZ 0x000002C0 // 6 MHz
|
|
#define SYSCTL_RCC_XTAL_6_14MHZ 0x00000300 // 6.144 MHz
|
|
#define SYSCTL_RCC_XTAL_7_37MHZ 0x00000340 // 7.3728 MHz
|
|
#define SYSCTL_RCC_XTAL_8MHZ 0x00000380 // 8 MHz
|
|
#define SYSCTL_RCC_XTAL_8_19MHZ 0x000003C0 // 8.192 MHz
|
|
#define SYSCTL_RCC_XTAL_10MHZ 0x00000400 // 10 MHz
|
|
#define SYSCTL_RCC_XTAL_12MHZ 0x00000440 // 12 MHz
|
|
#define SYSCTL_RCC_XTAL_12_2MHZ 0x00000480 // 12.288 MHz
|
|
#define SYSCTL_RCC_XTAL_13_5MHZ 0x000004C0 // 13.56 MHz
|
|
#define SYSCTL_RCC_XTAL_14_3MHZ 0x00000500 // 14.31818 MHz
|
|
#define SYSCTL_RCC_XTAL_16MHZ 0x00000540 // 16 MHz
|
|
#define SYSCTL_RCC_XTAL_16_3MHZ 0x00000580 // 16.384 MHz
|
|
#define SYSCTL_RCC_XTAL_18MHZ 0x000005C0 // 18.0 MHz
|
|
#define SYSCTL_RCC_XTAL_20MHZ 0x00000600 // 20.0 MHz
|
|
#define SYSCTL_RCC_XTAL_24MHZ 0x00000640 // 24.0 MHz
|
|
#define SYSCTL_RCC_XTAL_25MHZ 0x00000680 // 25.0 MHz
|
|
#define SYSCTL_RCC_PLLVER 0x00000400 // PLL Verification
|
|
#define SYSCTL_RCC_OSCSRC_M 0x00000030 // Oscillator Source
|
|
#define SYSCTL_RCC_OSCSRC_MAIN 0x00000000 // MOSC
|
|
#define SYSCTL_RCC_OSCSRC_INT 0x00000010 // IOSC
|
|
#define SYSCTL_RCC_OSCSRC_INT4 0x00000020 // IOSC/4
|
|
#define SYSCTL_RCC_OSCSRC_30 0x00000030 // 30 kHz
|
|
#define SYSCTL_RCC_IOSCVER 0x00000008 // Internal Oscillator Verification
|
|
// Timer
|
|
#define SYSCTL_RCC_MOSCVER 0x00000004 // Main Oscillator Verification
|
|
// Timer
|
|
#define SYSCTL_RCC_IOSCDIS 0x00000002 // Internal Oscillator Disable
|
|
#define SYSCTL_RCC_MOSCDIS 0x00000001 // Main Oscillator Disable
|
|
#define SYSCTL_RCC_SYSDIV_S 23
|
|
#define SYSCTL_RCC_PWMDIV_S 17 // Shift to the PWMDIV field
|
|
#define SYSCTL_RCC_XTAL_S 6 // Shift to the XTAL field
|
|
#define SYSCTL_RCC_OSCSRC_S 4 // Shift to the OSCSRC field
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PLLCFG register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PLLCFG_OD_M 0x0000C000 // PLL OD Value
|
|
#define SYSCTL_PLLCFG_OD_1 0x00000000 // Divide by 1
|
|
#define SYSCTL_PLLCFG_OD_2 0x00004000 // Divide by 2
|
|
#define SYSCTL_PLLCFG_OD_4 0x00008000 // Divide by 4
|
|
#define SYSCTL_PLLCFG_F_M 0x00003FE0 // PLL F Value
|
|
#define SYSCTL_PLLCFG_R_M 0x0000001F // PLL R Value
|
|
#define SYSCTL_PLLCFG_F_S 5
|
|
#define SYSCTL_PLLCFG_R_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_GPIOHBCTL
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_GPIOHBCTL_PORTJ 0x00000100 // Port J Advanced High-Performance
|
|
// Bus
|
|
#define SYSCTL_GPIOHBCTL_PORTH 0x00000080 // Port H Advanced High-Performance
|
|
// Bus
|
|
#define SYSCTL_GPIOHBCTL_PORTG 0x00000040 // Port G Advanced High-Performance
|
|
// Bus
|
|
#define SYSCTL_GPIOHBCTL_PORTF 0x00000020 // Port F Advanced High-Performance
|
|
// Bus
|
|
#define SYSCTL_GPIOHBCTL_PORTE 0x00000010 // Port E Advanced High-Performance
|
|
// Bus
|
|
#define SYSCTL_GPIOHBCTL_PORTD 0x00000008 // Port D Advanced High-Performance
|
|
// Bus
|
|
#define SYSCTL_GPIOHBCTL_PORTC 0x00000004 // Port C Advanced High-Performance
|
|
// Bus
|
|
#define SYSCTL_GPIOHBCTL_PORTB 0x00000002 // Port B Advanced High-Performance
|
|
// Bus
|
|
#define SYSCTL_GPIOHBCTL_PORTA 0x00000001 // Port A Advanced High-Performance
|
|
// Bus
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_RCC2 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_RCC2_USERCC2 0x80000000 // Use RCC2
|
|
#define SYSCTL_RCC2_DIV400 0x40000000 // Divide PLL as 400 MHz vs. 200
|
|
// MHz
|
|
#define SYSCTL_RCC2_SYSDIV2_M 0x1F800000 // System Clock Divisor 2
|
|
#define SYSCTL_RCC2_SYSDIV2_2 0x00800000 // System clock /2
|
|
#define SYSCTL_RCC2_SYSDIV2_3 0x01000000 // System clock /3
|
|
#define SYSCTL_RCC2_SYSDIV2_4 0x01800000 // System clock /4
|
|
#define SYSCTL_RCC2_SYSDIV2_5 0x02000000 // System clock /5
|
|
#define SYSCTL_RCC2_SYSDIV2_6 0x02800000 // System clock /6
|
|
#define SYSCTL_RCC2_SYSDIV2_7 0x03000000 // System clock /7
|
|
#define SYSCTL_RCC2_SYSDIV2_8 0x03800000 // System clock /8
|
|
#define SYSCTL_RCC2_SYSDIV2_9 0x04000000 // System clock /9
|
|
#define SYSCTL_RCC2_SYSDIV2_10 0x04800000 // System clock /10
|
|
#define SYSCTL_RCC2_SYSDIV2_11 0x05000000 // System clock /11
|
|
#define SYSCTL_RCC2_SYSDIV2_12 0x05800000 // System clock /12
|
|
#define SYSCTL_RCC2_SYSDIV2_13 0x06000000 // System clock /13
|
|
#define SYSCTL_RCC2_SYSDIV2_14 0x06800000 // System clock /14
|
|
#define SYSCTL_RCC2_SYSDIV2_15 0x07000000 // System clock /15
|
|
#define SYSCTL_RCC2_SYSDIV2_16 0x07800000 // System clock /16
|
|
#define SYSCTL_RCC2_SYSDIV2_17 0x08000000 // System clock /17
|
|
#define SYSCTL_RCC2_SYSDIV2_18 0x08800000 // System clock /18
|
|
#define SYSCTL_RCC2_SYSDIV2_19 0x09000000 // System clock /19
|
|
#define SYSCTL_RCC2_SYSDIV2_20 0x09800000 // System clock /20
|
|
#define SYSCTL_RCC2_SYSDIV2_21 0x0A000000 // System clock /21
|
|
#define SYSCTL_RCC2_SYSDIV2_22 0x0A800000 // System clock /22
|
|
#define SYSCTL_RCC2_SYSDIV2_23 0x0B000000 // System clock /23
|
|
#define SYSCTL_RCC2_SYSDIV2_24 0x0B800000 // System clock /24
|
|
#define SYSCTL_RCC2_SYSDIV2_25 0x0C000000 // System clock /25
|
|
#define SYSCTL_RCC2_SYSDIV2_26 0x0C800000 // System clock /26
|
|
#define SYSCTL_RCC2_SYSDIV2_27 0x0D000000 // System clock /27
|
|
#define SYSCTL_RCC2_SYSDIV2_28 0x0D800000 // System clock /28
|
|
#define SYSCTL_RCC2_SYSDIV2_29 0x0E000000 // System clock /29
|
|
#define SYSCTL_RCC2_SYSDIV2_30 0x0E800000 // System clock /30
|
|
#define SYSCTL_RCC2_SYSDIV2_31 0x0F000000 // System clock /31
|
|
#define SYSCTL_RCC2_SYSDIV2_32 0x0F800000 // System clock /32
|
|
#define SYSCTL_RCC2_SYSDIV2_33 0x10000000 // System clock /33
|
|
#define SYSCTL_RCC2_SYSDIV2_34 0x10800000 // System clock /34
|
|
#define SYSCTL_RCC2_SYSDIV2_35 0x11000000 // System clock /35
|
|
#define SYSCTL_RCC2_SYSDIV2_36 0x11800000 // System clock /36
|
|
#define SYSCTL_RCC2_SYSDIV2_37 0x12000000 // System clock /37
|
|
#define SYSCTL_RCC2_SYSDIV2_38 0x12800000 // System clock /38
|
|
#define SYSCTL_RCC2_SYSDIV2_39 0x13000000 // System clock /39
|
|
#define SYSCTL_RCC2_SYSDIV2_40 0x13800000 // System clock /40
|
|
#define SYSCTL_RCC2_SYSDIV2_41 0x14000000 // System clock /41
|
|
#define SYSCTL_RCC2_SYSDIV2_42 0x14800000 // System clock /42
|
|
#define SYSCTL_RCC2_SYSDIV2_43 0x15000000 // System clock /43
|
|
#define SYSCTL_RCC2_SYSDIV2_44 0x15800000 // System clock /44
|
|
#define SYSCTL_RCC2_SYSDIV2_45 0x16000000 // System clock /45
|
|
#define SYSCTL_RCC2_SYSDIV2_46 0x16800000 // System clock /46
|
|
#define SYSCTL_RCC2_SYSDIV2_47 0x17000000 // System clock /47
|
|
#define SYSCTL_RCC2_SYSDIV2_48 0x17800000 // System clock /48
|
|
#define SYSCTL_RCC2_SYSDIV2_49 0x18000000 // System clock /49
|
|
#define SYSCTL_RCC2_SYSDIV2_50 0x18800000 // System clock /50
|
|
#define SYSCTL_RCC2_SYSDIV2_51 0x19000000 // System clock /51
|
|
#define SYSCTL_RCC2_SYSDIV2_52 0x19800000 // System clock /52
|
|
#define SYSCTL_RCC2_SYSDIV2_53 0x1A000000 // System clock /53
|
|
#define SYSCTL_RCC2_SYSDIV2_54 0x1A800000 // System clock /54
|
|
#define SYSCTL_RCC2_SYSDIV2_55 0x1B000000 // System clock /55
|
|
#define SYSCTL_RCC2_SYSDIV2_56 0x1B800000 // System clock /56
|
|
#define SYSCTL_RCC2_SYSDIV2_57 0x1C000000 // System clock /57
|
|
#define SYSCTL_RCC2_SYSDIV2_58 0x1C800000 // System clock /58
|
|
#define SYSCTL_RCC2_SYSDIV2_59 0x1D000000 // System clock /59
|
|
#define SYSCTL_RCC2_SYSDIV2_60 0x1D800000 // System clock /60
|
|
#define SYSCTL_RCC2_SYSDIV2_61 0x1E000000 // System clock /61
|
|
#define SYSCTL_RCC2_SYSDIV2_62 0x1E800000 // System clock /62
|
|
#define SYSCTL_RCC2_SYSDIV2_63 0x1F000000 // System clock /63
|
|
#define SYSCTL_RCC2_SYSDIV2_64 0x1F800000 // System clock /64
|
|
#define SYSCTL_RCC2_SYSDIV2LSB 0x00400000 // Additional LSB for SYSDIV2
|
|
#define SYSCTL_RCC2_USBPWRDN 0x00004000 // Power-Down USB PLL
|
|
#define SYSCTL_RCC2_PWRDN2 0x00002000 // Power-Down PLL 2
|
|
#define SYSCTL_RCC2_BYPASS2 0x00000800 // PLL Bypass 2
|
|
#define SYSCTL_RCC2_OSCSRC2_M 0x00000070 // Oscillator Source 2
|
|
#define SYSCTL_RCC2_OSCSRC2_MO 0x00000000 // MOSC
|
|
#define SYSCTL_RCC2_OSCSRC2_IO 0x00000010 // PIOSC
|
|
#define SYSCTL_RCC2_OSCSRC2_IO4 0x00000020 // PIOSC/4
|
|
#define SYSCTL_RCC2_OSCSRC2_30 0x00000030 // 30 kHz
|
|
#define SYSCTL_RCC2_OSCSRC2_419 0x00000060 // 4.194304 MHz
|
|
#define SYSCTL_RCC2_OSCSRC2_32 0x00000070 // 32.768 kHz
|
|
#define SYSCTL_RCC2_SYSDIV2_S 23
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_MOSCCTL register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_MOSCCTL_NOXTAL 0x00000004 // No Crystal Connected
|
|
#define SYSCTL_MOSCCTL_MOSCIM 0x00000002 // MOSC Failure Action
|
|
#define SYSCTL_MOSCCTL_CVAL 0x00000001 // Clock Validation for MOSC
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_RCGC0 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_RCGC0_WDT1 0x10000000 // WDT1 Clock Gating Control
|
|
#define SYSCTL_RCGC0_CAN2 0x04000000 // CAN2 Clock Gating Control
|
|
#define SYSCTL_RCGC0_CAN1 0x02000000 // CAN1 Clock Gating Control
|
|
#define SYSCTL_RCGC0_CAN0 0x01000000 // CAN0 Clock Gating Control
|
|
#define SYSCTL_RCGC0_PWM0 0x00100000 // PWM Clock Gating Control
|
|
#define SYSCTL_RCGC0_ADC1 0x00020000 // ADC1 Clock Gating Control
|
|
#define SYSCTL_RCGC0_ADC0 0x00010000 // ADC0 Clock Gating Control
|
|
#define SYSCTL_RCGC0_ADCSPD_M 0x00000F00 // ADC Sample Speed
|
|
#define SYSCTL_RCGC0_ADCSPD125K 0x00000000 // 125K samples/second
|
|
#define SYSCTL_RCGC0_ADCSPD250K 0x00000100 // 250K samples/second
|
|
#define SYSCTL_RCGC0_ADCSPD500K 0x00000200 // 500K samples/second
|
|
#define SYSCTL_RCGC0_ADCSPD1M 0x00000300 // 1M samples/second
|
|
#define SYSCTL_RCGC0_ADC1SPD_M 0x00000C00 // ADC1 Sample Speed
|
|
#define SYSCTL_RCGC0_ADC1SPD_125K \
|
|
0x00000000 // 125K samples/second
|
|
#define SYSCTL_RCGC0_ADC1SPD_250K \
|
|
0x00000400 // 250K samples/second
|
|
#define SYSCTL_RCGC0_ADC1SPD_500K \
|
|
0x00000800 // 500K samples/second
|
|
#define SYSCTL_RCGC0_ADC1SPD_1M 0x00000C00 // 1M samples/second
|
|
#define SYSCTL_RCGC0_ADC0SPD_M 0x00000300 // ADC0 Sample Speed
|
|
#define SYSCTL_RCGC0_ADC0SPD_125K \
|
|
0x00000000 // 125K samples/second
|
|
#define SYSCTL_RCGC0_ADC0SPD_250K \
|
|
0x00000100 // 250K samples/second
|
|
#define SYSCTL_RCGC0_ADC0SPD_500K \
|
|
0x00000200 // 500K samples/second
|
|
#define SYSCTL_RCGC0_ADC0SPD_1M 0x00000300 // 1M samples/second
|
|
#define SYSCTL_RCGC0_HIB 0x00000040 // HIB Clock Gating Control
|
|
#define SYSCTL_RCGC0_WDT0 0x00000008 // WDT0 Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_RCGC1 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_RCGC1_EPI0 0x40000000 // EPI0 Clock Gating
|
|
#define SYSCTL_RCGC1_I2S0 0x10000000 // I2S0 Clock Gating
|
|
#define SYSCTL_RCGC1_COMP2 0x04000000 // Analog Comparator 2 Clock Gating
|
|
#define SYSCTL_RCGC1_COMP1 0x02000000 // Analog Comparator 1 Clock Gating
|
|
#define SYSCTL_RCGC1_COMP0 0x01000000 // Analog Comparator 0 Clock Gating
|
|
#define SYSCTL_RCGC1_TIMER3 0x00080000 // Timer 3 Clock Gating Control
|
|
#define SYSCTL_RCGC1_TIMER2 0x00040000 // Timer 2 Clock Gating Control
|
|
#define SYSCTL_RCGC1_TIMER1 0x00020000 // Timer 1 Clock Gating Control
|
|
#define SYSCTL_RCGC1_TIMER0 0x00010000 // Timer 0 Clock Gating Control
|
|
#define SYSCTL_RCGC1_I2C1 0x00004000 // I2C1 Clock Gating Control
|
|
#define SYSCTL_RCGC1_I2C0 0x00001000 // I2C0 Clock Gating Control
|
|
#define SYSCTL_RCGC1_QEI1 0x00000200 // QEI1 Clock Gating Control
|
|
#define SYSCTL_RCGC1_QEI0 0x00000100 // QEI0 Clock Gating Control
|
|
#define SYSCTL_RCGC1_SSI1 0x00000020 // SSI1 Clock Gating Control
|
|
#define SYSCTL_RCGC1_SSI0 0x00000010 // SSI0 Clock Gating Control
|
|
#define SYSCTL_RCGC1_UART2 0x00000004 // UART2 Clock Gating Control
|
|
#define SYSCTL_RCGC1_UART1 0x00000002 // UART1 Clock Gating Control
|
|
#define SYSCTL_RCGC1_UART0 0x00000001 // UART0 Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_RCGC2 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_RCGC2_EPHY0 0x40000000 // PHY0 Clock Gating Control
|
|
#define SYSCTL_RCGC2_EMAC0 0x10000000 // MAC0 Clock Gating Control
|
|
#define SYSCTL_RCGC2_USB0 0x00010000 // USB0 Clock Gating Control
|
|
#define SYSCTL_RCGC2_UDMA 0x00002000 // Micro-DMA Clock Gating Control
|
|
#define SYSCTL_RCGC2_GPIOJ 0x00000100 // Port J Clock Gating Control
|
|
#define SYSCTL_RCGC2_GPIOH 0x00000080 // Port H Clock Gating Control
|
|
#define SYSCTL_RCGC2_GPIOG 0x00000040 // Port G Clock Gating Control
|
|
#define SYSCTL_RCGC2_GPIOF 0x00000020 // Port F Clock Gating Control
|
|
#define SYSCTL_RCGC2_GPIOE 0x00000010 // Port E Clock Gating Control
|
|
#define SYSCTL_RCGC2_GPIOD 0x00000008 // Port D Clock Gating Control
|
|
#define SYSCTL_RCGC2_GPIOC 0x00000004 // Port C Clock Gating Control
|
|
#define SYSCTL_RCGC2_GPIOB 0x00000002 // Port B Clock Gating Control
|
|
#define SYSCTL_RCGC2_GPIOA 0x00000001 // Port A Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SCGC0 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SCGC0_WDT1 0x10000000 // WDT1 Clock Gating Control
|
|
#define SYSCTL_SCGC0_CAN2 0x04000000 // CAN2 Clock Gating Control
|
|
#define SYSCTL_SCGC0_CAN1 0x02000000 // CAN1 Clock Gating Control
|
|
#define SYSCTL_SCGC0_CAN0 0x01000000 // CAN0 Clock Gating Control
|
|
#define SYSCTL_SCGC0_PWM0 0x00100000 // PWM Clock Gating Control
|
|
#define SYSCTL_SCGC0_ADC1 0x00020000 // ADC1 Clock Gating Control
|
|
#define SYSCTL_SCGC0_ADC0 0x00010000 // ADC0 Clock Gating Control
|
|
#define SYSCTL_SCGC0_ADCSPD_M 0x00000F00 // ADC Sample Speed
|
|
#define SYSCTL_SCGC0_ADCSPD125K 0x00000000 // 125K samples/second
|
|
#define SYSCTL_SCGC0_ADCSPD250K 0x00000100 // 250K samples/second
|
|
#define SYSCTL_SCGC0_ADCSPD500K 0x00000200 // 500K samples/second
|
|
#define SYSCTL_SCGC0_ADCSPD1M 0x00000300 // 1M samples/second
|
|
#define SYSCTL_SCGC0_ADC1SPD_M 0x00000C00 // ADC1 Sample Speed
|
|
#define SYSCTL_SCGC0_ADC1SPD_125K \
|
|
0x00000000 // 125K samples/second
|
|
#define SYSCTL_SCGC0_ADC1SPD_250K \
|
|
0x00000400 // 250K samples/second
|
|
#define SYSCTL_SCGC0_ADC1SPD_500K \
|
|
0x00000800 // 500K samples/second
|
|
#define SYSCTL_SCGC0_ADC1SPD_1M 0x00000C00 // 1M samples/second
|
|
#define SYSCTL_SCGC0_ADC0SPD_M 0x00000300 // ADC0 Sample Speed
|
|
#define SYSCTL_SCGC0_ADC0SPD_125K \
|
|
0x00000000 // 125K samples/second
|
|
#define SYSCTL_SCGC0_ADC0SPD_250K \
|
|
0x00000100 // 250K samples/second
|
|
#define SYSCTL_SCGC0_ADC0SPD_500K \
|
|
0x00000200 // 500K samples/second
|
|
#define SYSCTL_SCGC0_ADC0SPD_1M 0x00000300 // 1M samples/second
|
|
#define SYSCTL_SCGC0_HIB 0x00000040 // HIB Clock Gating Control
|
|
#define SYSCTL_SCGC0_WDT0 0x00000008 // WDT0 Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SCGC1 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SCGC1_EPI0 0x40000000 // EPI0 Clock Gating
|
|
#define SYSCTL_SCGC1_I2S0 0x10000000 // I2S0 Clock Gating
|
|
#define SYSCTL_SCGC1_COMP2 0x04000000 // Analog Comparator 2 Clock Gating
|
|
#define SYSCTL_SCGC1_COMP1 0x02000000 // Analog Comparator 1 Clock Gating
|
|
#define SYSCTL_SCGC1_COMP0 0x01000000 // Analog Comparator 0 Clock Gating
|
|
#define SYSCTL_SCGC1_TIMER3 0x00080000 // Timer 3 Clock Gating Control
|
|
#define SYSCTL_SCGC1_TIMER2 0x00040000 // Timer 2 Clock Gating Control
|
|
#define SYSCTL_SCGC1_TIMER1 0x00020000 // Timer 1 Clock Gating Control
|
|
#define SYSCTL_SCGC1_TIMER0 0x00010000 // Timer 0 Clock Gating Control
|
|
#define SYSCTL_SCGC1_I2C1 0x00004000 // I2C1 Clock Gating Control
|
|
#define SYSCTL_SCGC1_I2C0 0x00001000 // I2C0 Clock Gating Control
|
|
#define SYSCTL_SCGC1_QEI1 0x00000200 // QEI1 Clock Gating Control
|
|
#define SYSCTL_SCGC1_QEI0 0x00000100 // QEI0 Clock Gating Control
|
|
#define SYSCTL_SCGC1_SSI1 0x00000020 // SSI1 Clock Gating Control
|
|
#define SYSCTL_SCGC1_SSI0 0x00000010 // SSI0 Clock Gating Control
|
|
#define SYSCTL_SCGC1_UART2 0x00000004 // UART2 Clock Gating Control
|
|
#define SYSCTL_SCGC1_UART1 0x00000002 // UART1 Clock Gating Control
|
|
#define SYSCTL_SCGC1_UART0 0x00000001 // UART0 Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SCGC2 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SCGC2_EPHY0 0x40000000 // PHY0 Clock Gating Control
|
|
#define SYSCTL_SCGC2_EMAC0 0x10000000 // MAC0 Clock Gating Control
|
|
#define SYSCTL_SCGC2_USB0 0x00010000 // USB0 Clock Gating Control
|
|
#define SYSCTL_SCGC2_UDMA 0x00002000 // Micro-DMA Clock Gating Control
|
|
#define SYSCTL_SCGC2_GPIOJ 0x00000100 // Port J Clock Gating Control
|
|
#define SYSCTL_SCGC2_GPIOH 0x00000080 // Port H Clock Gating Control
|
|
#define SYSCTL_SCGC2_GPIOG 0x00000040 // Port G Clock Gating Control
|
|
#define SYSCTL_SCGC2_GPIOF 0x00000020 // Port F Clock Gating Control
|
|
#define SYSCTL_SCGC2_GPIOE 0x00000010 // Port E Clock Gating Control
|
|
#define SYSCTL_SCGC2_GPIOD 0x00000008 // Port D Clock Gating Control
|
|
#define SYSCTL_SCGC2_GPIOC 0x00000004 // Port C Clock Gating Control
|
|
#define SYSCTL_SCGC2_GPIOB 0x00000002 // Port B Clock Gating Control
|
|
#define SYSCTL_SCGC2_GPIOA 0x00000001 // Port A Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DCGC0 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DCGC0_WDT1 0x10000000 // WDT1 Clock Gating Control
|
|
#define SYSCTL_DCGC0_CAN2 0x04000000 // CAN2 Clock Gating Control
|
|
#define SYSCTL_DCGC0_CAN1 0x02000000 // CAN1 Clock Gating Control
|
|
#define SYSCTL_DCGC0_CAN0 0x01000000 // CAN0 Clock Gating Control
|
|
#define SYSCTL_DCGC0_PWM0 0x00100000 // PWM Clock Gating Control
|
|
#define SYSCTL_DCGC0_ADC1 0x00020000 // ADC1 Clock Gating Control
|
|
#define SYSCTL_DCGC0_ADC0 0x00010000 // ADC0 Clock Gating Control
|
|
#define SYSCTL_DCGC0_HIB 0x00000040 // HIB Clock Gating Control
|
|
#define SYSCTL_DCGC0_WDT0 0x00000008 // WDT0 Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DCGC1 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DCGC1_EPI0 0x40000000 // EPI0 Clock Gating
|
|
#define SYSCTL_DCGC1_I2S0 0x10000000 // I2S0 Clock Gating
|
|
#define SYSCTL_DCGC1_COMP2 0x04000000 // Analog Comparator 2 Clock Gating
|
|
#define SYSCTL_DCGC1_COMP1 0x02000000 // Analog Comparator 1 Clock Gating
|
|
#define SYSCTL_DCGC1_COMP0 0x01000000 // Analog Comparator 0 Clock Gating
|
|
#define SYSCTL_DCGC1_TIMER3 0x00080000 // Timer 3 Clock Gating Control
|
|
#define SYSCTL_DCGC1_TIMER2 0x00040000 // Timer 2 Clock Gating Control
|
|
#define SYSCTL_DCGC1_TIMER1 0x00020000 // Timer 1 Clock Gating Control
|
|
#define SYSCTL_DCGC1_TIMER0 0x00010000 // Timer 0 Clock Gating Control
|
|
#define SYSCTL_DCGC1_I2C1 0x00004000 // I2C1 Clock Gating Control
|
|
#define SYSCTL_DCGC1_I2C0 0x00001000 // I2C0 Clock Gating Control
|
|
#define SYSCTL_DCGC1_QEI1 0x00000200 // QEI1 Clock Gating Control
|
|
#define SYSCTL_DCGC1_QEI0 0x00000100 // QEI0 Clock Gating Control
|
|
#define SYSCTL_DCGC1_SSI1 0x00000020 // SSI1 Clock Gating Control
|
|
#define SYSCTL_DCGC1_SSI0 0x00000010 // SSI0 Clock Gating Control
|
|
#define SYSCTL_DCGC1_UART2 0x00000004 // UART2 Clock Gating Control
|
|
#define SYSCTL_DCGC1_UART1 0x00000002 // UART1 Clock Gating Control
|
|
#define SYSCTL_DCGC1_UART0 0x00000001 // UART0 Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DCGC2 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DCGC2_EPHY0 0x40000000 // PHY0 Clock Gating Control
|
|
#define SYSCTL_DCGC2_EMAC0 0x10000000 // MAC0 Clock Gating Control
|
|
#define SYSCTL_DCGC2_USB0 0x00010000 // USB0 Clock Gating Control
|
|
#define SYSCTL_DCGC2_UDMA 0x00002000 // Micro-DMA Clock Gating Control
|
|
#define SYSCTL_DCGC2_GPIOJ 0x00000100 // Port J Clock Gating Control
|
|
#define SYSCTL_DCGC2_GPIOH 0x00000080 // Port H Clock Gating Control
|
|
#define SYSCTL_DCGC2_GPIOG 0x00000040 // Port G Clock Gating Control
|
|
#define SYSCTL_DCGC2_GPIOF 0x00000020 // Port F Clock Gating Control
|
|
#define SYSCTL_DCGC2_GPIOE 0x00000010 // Port E Clock Gating Control
|
|
#define SYSCTL_DCGC2_GPIOD 0x00000008 // Port D Clock Gating Control
|
|
#define SYSCTL_DCGC2_GPIOC 0x00000004 // Port C Clock Gating Control
|
|
#define SYSCTL_DCGC2_GPIOB 0x00000002 // Port B Clock Gating Control
|
|
#define SYSCTL_DCGC2_GPIOA 0x00000001 // Port A Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DSLPCLKCFG
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DSLPCLKCFG_D_M 0x1F800000 // Divider Field Override
|
|
#define SYSCTL_DSLPCLKCFG_D_1 0x00000000 // System clock /1
|
|
#define SYSCTL_DSLPCLKCFG_D_2 0x00800000 // System clock /2
|
|
#define SYSCTL_DSLPCLKCFG_D_3 0x01000000 // System clock /3
|
|
#define SYSCTL_DSLPCLKCFG_D_4 0x01800000 // System clock /4
|
|
#define SYSCTL_DSLPCLKCFG_D_5 0x02000000 // System clock /5
|
|
#define SYSCTL_DSLPCLKCFG_D_6 0x02800000 // System clock /6
|
|
#define SYSCTL_DSLPCLKCFG_D_7 0x03000000 // System clock /7
|
|
#define SYSCTL_DSLPCLKCFG_D_8 0x03800000 // System clock /8
|
|
#define SYSCTL_DSLPCLKCFG_D_9 0x04000000 // System clock /9
|
|
#define SYSCTL_DSLPCLKCFG_D_10 0x04800000 // System clock /10
|
|
#define SYSCTL_DSLPCLKCFG_D_11 0x05000000 // System clock /11
|
|
#define SYSCTL_DSLPCLKCFG_D_12 0x05800000 // System clock /12
|
|
#define SYSCTL_DSLPCLKCFG_D_13 0x06000000 // System clock /13
|
|
#define SYSCTL_DSLPCLKCFG_D_14 0x06800000 // System clock /14
|
|
#define SYSCTL_DSLPCLKCFG_D_15 0x07000000 // System clock /15
|
|
#define SYSCTL_DSLPCLKCFG_D_16 0x07800000 // System clock /16
|
|
#define SYSCTL_DSLPCLKCFG_D_17 0x08000000 // System clock /17
|
|
#define SYSCTL_DSLPCLKCFG_D_18 0x08800000 // System clock /18
|
|
#define SYSCTL_DSLPCLKCFG_D_19 0x09000000 // System clock /19
|
|
#define SYSCTL_DSLPCLKCFG_D_20 0x09800000 // System clock /20
|
|
#define SYSCTL_DSLPCLKCFG_D_21 0x0A000000 // System clock /21
|
|
#define SYSCTL_DSLPCLKCFG_D_22 0x0A800000 // System clock /22
|
|
#define SYSCTL_DSLPCLKCFG_D_23 0x0B000000 // System clock /23
|
|
#define SYSCTL_DSLPCLKCFG_D_24 0x0B800000 // System clock /24
|
|
#define SYSCTL_DSLPCLKCFG_D_25 0x0C000000 // System clock /25
|
|
#define SYSCTL_DSLPCLKCFG_D_26 0x0C800000 // System clock /26
|
|
#define SYSCTL_DSLPCLKCFG_D_27 0x0D000000 // System clock /27
|
|
#define SYSCTL_DSLPCLKCFG_D_28 0x0D800000 // System clock /28
|
|
#define SYSCTL_DSLPCLKCFG_D_29 0x0E000000 // System clock /29
|
|
#define SYSCTL_DSLPCLKCFG_D_30 0x0E800000 // System clock /30
|
|
#define SYSCTL_DSLPCLKCFG_D_31 0x0F000000 // System clock /31
|
|
#define SYSCTL_DSLPCLKCFG_D_32 0x0F800000 // System clock /32
|
|
#define SYSCTL_DSLPCLKCFG_D_33 0x10000000 // System clock /33
|
|
#define SYSCTL_DSLPCLKCFG_D_34 0x10800000 // System clock /34
|
|
#define SYSCTL_DSLPCLKCFG_D_35 0x11000000 // System clock /35
|
|
#define SYSCTL_DSLPCLKCFG_D_36 0x11800000 // System clock /36
|
|
#define SYSCTL_DSLPCLKCFG_D_37 0x12000000 // System clock /37
|
|
#define SYSCTL_DSLPCLKCFG_D_38 0x12800000 // System clock /38
|
|
#define SYSCTL_DSLPCLKCFG_D_39 0x13000000 // System clock /39
|
|
#define SYSCTL_DSLPCLKCFG_D_40 0x13800000 // System clock /40
|
|
#define SYSCTL_DSLPCLKCFG_D_41 0x14000000 // System clock /41
|
|
#define SYSCTL_DSLPCLKCFG_D_42 0x14800000 // System clock /42
|
|
#define SYSCTL_DSLPCLKCFG_D_43 0x15000000 // System clock /43
|
|
#define SYSCTL_DSLPCLKCFG_D_44 0x15800000 // System clock /44
|
|
#define SYSCTL_DSLPCLKCFG_D_45 0x16000000 // System clock /45
|
|
#define SYSCTL_DSLPCLKCFG_D_46 0x16800000 // System clock /46
|
|
#define SYSCTL_DSLPCLKCFG_D_47 0x17000000 // System clock /47
|
|
#define SYSCTL_DSLPCLKCFG_D_48 0x17800000 // System clock /48
|
|
#define SYSCTL_DSLPCLKCFG_D_49 0x18000000 // System clock /49
|
|
#define SYSCTL_DSLPCLKCFG_D_50 0x18800000 // System clock /50
|
|
#define SYSCTL_DSLPCLKCFG_D_51 0x19000000 // System clock /51
|
|
#define SYSCTL_DSLPCLKCFG_D_52 0x19800000 // System clock /52
|
|
#define SYSCTL_DSLPCLKCFG_D_53 0x1A000000 // System clock /53
|
|
#define SYSCTL_DSLPCLKCFG_D_54 0x1A800000 // System clock /54
|
|
#define SYSCTL_DSLPCLKCFG_D_55 0x1B000000 // System clock /55
|
|
#define SYSCTL_DSLPCLKCFG_D_56 0x1B800000 // System clock /56
|
|
#define SYSCTL_DSLPCLKCFG_D_57 0x1C000000 // System clock /57
|
|
#define SYSCTL_DSLPCLKCFG_D_58 0x1C800000 // System clock /58
|
|
#define SYSCTL_DSLPCLKCFG_D_59 0x1D000000 // System clock /59
|
|
#define SYSCTL_DSLPCLKCFG_D_60 0x1D800000 // System clock /60
|
|
#define SYSCTL_DSLPCLKCFG_D_61 0x1E000000 // System clock /61
|
|
#define SYSCTL_DSLPCLKCFG_D_62 0x1E800000 // System clock /62
|
|
#define SYSCTL_DSLPCLKCFG_D_63 0x1F000000 // System clock /63
|
|
#define SYSCTL_DSLPCLKCFG_D_64 0x1F800000 // System clock /64
|
|
#define SYSCTL_DSLPCLKCFG_O_M 0x00000070 // Clock Source
|
|
#define SYSCTL_DSLPCLKCFG_O_IGN 0x00000000 // MOSC
|
|
#define SYSCTL_DSLPCLKCFG_O_IO 0x00000010 // PIOSC
|
|
#define SYSCTL_DSLPCLKCFG_O_30 0x00000030 // 30 kHz
|
|
#define SYSCTL_DSLPCLKCFG_O_32 0x00000070 // 32.768 kHz
|
|
#define SYSCTL_DSLPCLKCFG_PIOSCPD \
|
|
0x00000002 // PIOSC Power Down Request
|
|
#define SYSCTL_DSLPCLKCFG_IOSC 0x00000001 // IOSC Clock Source
|
|
#define SYSCTL_DSLPCLKCFG_D_S 23
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SYSPROP register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SYSPROP_FPU 0x00000001 // FPU Present
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PIOSCCAL
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PIOSCCAL_UTEN 0x80000000 // Use User Trim Value
|
|
#define SYSCTL_PIOSCCAL_CAL 0x00000200 // Start Calibration
|
|
#define SYSCTL_PIOSCCAL_UPDATE 0x00000100 // Update Trim
|
|
#define SYSCTL_PIOSCCAL_UT_M 0x0000007F // User Trim Value
|
|
#define SYSCTL_PIOSCCAL_UT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_CLKVCLR register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_CLKVCLR_VERCLR 0x00000001 // Clock Verification Clear
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PIOSCSTAT
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PIOSCSTAT_DT_M 0x007F0000 // Default Trim Value
|
|
#define SYSCTL_PIOSCSTAT_CR_M 0x00000300 // Calibration Result
|
|
#define SYSCTL_PIOSCSTAT_CRNONE 0x00000000 // Calibration has not been
|
|
// attempted
|
|
#define SYSCTL_PIOSCSTAT_CRPASS 0x00000100 // The last calibration operation
|
|
// completed to meet 1% accuracy
|
|
#define SYSCTL_PIOSCSTAT_CRFAIL 0x00000200 // The last calibration operation
|
|
// failed to meet 1% accuracy
|
|
#define SYSCTL_PIOSCSTAT_CT_M 0x0000007F // Calibration Trim Value
|
|
#define SYSCTL_PIOSCSTAT_DT_S 16
|
|
#define SYSCTL_PIOSCSTAT_CT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_LDOARST register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_LDOARST_LDOARST 0x00000001 // LDO Reset
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PLLFREQ0
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PLLFREQ0_MFRAC_M 0x000FFC00 // PLL M Fractional Value
|
|
#define SYSCTL_PLLFREQ0_MINT_M 0x000003FF // PLL M Integer Value
|
|
#define SYSCTL_PLLFREQ0_MFRAC_S 10
|
|
#define SYSCTL_PLLFREQ0_MINT_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PLLFREQ1
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PLLFREQ1_Q_M 0x00001F00 // PLL Q Value
|
|
#define SYSCTL_PLLFREQ1_N_M 0x0000001F // PLL N Value
|
|
#define SYSCTL_PLLFREQ1_Q_S 8
|
|
#define SYSCTL_PLLFREQ1_N_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PLLSTAT register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PLLSTAT_LOCK 0x00000001 // PLL Lock
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_I2SMCLKCFG
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_I2SMCLKCFG_RXEN 0x80000000 // RX Clock Enable
|
|
#define SYSCTL_I2SMCLKCFG_RXI_M 0x3FF00000 // RX Clock Integer Input
|
|
#define SYSCTL_I2SMCLKCFG_RXF_M 0x000F0000 // RX Clock Fractional Input
|
|
#define SYSCTL_I2SMCLKCFG_TXEN 0x00008000 // TX Clock Enable
|
|
#define SYSCTL_I2SMCLKCFG_TXI_M 0x00003FF0 // TX Clock Integer Input
|
|
#define SYSCTL_I2SMCLKCFG_TXF_M 0x0000000F // TX Clock Fractional Input
|
|
#define SYSCTL_I2SMCLKCFG_RXI_S 20
|
|
#define SYSCTL_I2SMCLKCFG_RXF_S 16
|
|
#define SYSCTL_I2SMCLKCFG_TXI_S 4
|
|
#define SYSCTL_I2SMCLKCFG_TXF_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DC9 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DC9_ADC1DC7 0x00800000 // ADC1 DC7 Present
|
|
#define SYSCTL_DC9_ADC1DC6 0x00400000 // ADC1 DC6 Present
|
|
#define SYSCTL_DC9_ADC1DC5 0x00200000 // ADC1 DC5 Present
|
|
#define SYSCTL_DC9_ADC1DC4 0x00100000 // ADC1 DC4 Present
|
|
#define SYSCTL_DC9_ADC1DC3 0x00080000 // ADC1 DC3 Present
|
|
#define SYSCTL_DC9_ADC1DC2 0x00040000 // ADC1 DC2 Present
|
|
#define SYSCTL_DC9_ADC1DC1 0x00020000 // ADC1 DC1 Present
|
|
#define SYSCTL_DC9_ADC1DC0 0x00010000 // ADC1 DC0 Present
|
|
#define SYSCTL_DC9_ADC0DC7 0x00000080 // ADC0 DC7 Present
|
|
#define SYSCTL_DC9_ADC0DC6 0x00000040 // ADC0 DC6 Present
|
|
#define SYSCTL_DC9_ADC0DC5 0x00000020 // ADC0 DC5 Present
|
|
#define SYSCTL_DC9_ADC0DC4 0x00000010 // ADC0 DC4 Present
|
|
#define SYSCTL_DC9_ADC0DC3 0x00000008 // ADC0 DC3 Present
|
|
#define SYSCTL_DC9_ADC0DC2 0x00000004 // ADC0 DC2 Present
|
|
#define SYSCTL_DC9_ADC0DC1 0x00000002 // ADC0 DC1 Present
|
|
#define SYSCTL_DC9_ADC0DC0 0x00000001 // ADC0 DC0 Present
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_NVMSTAT register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_NVMSTAT_TPSW 0x00000010 // Third Party Software Present
|
|
#define SYSCTL_NVMSTAT_FWB 0x00000001 // 32 Word Flash Write Buffer
|
|
// Active
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PPWD register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PPWD_P1 0x00000002 // Watchdog Timer 1 Present
|
|
#define SYSCTL_PPWD_P0 0x00000001 // Watchdog Timer 0 Present
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PPTIMER register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PPTIMER_P5 0x00000020 // Timer 5 Present
|
|
#define SYSCTL_PPTIMER_P4 0x00000010 // Timer 4 Present
|
|
#define SYSCTL_PPTIMER_P3 0x00000008 // Timer 3 Present
|
|
#define SYSCTL_PPTIMER_P2 0x00000004 // Timer 2 Present
|
|
#define SYSCTL_PPTIMER_P1 0x00000002 // Timer 1 Present
|
|
#define SYSCTL_PPTIMER_P0 0x00000001 // Timer 0 Present
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PPGPIO register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PPGPIO_P14 0x00004000 // GPIO Port Q Present
|
|
#define SYSCTL_PPGPIO_P13 0x00002000 // GPIO Port P Present
|
|
#define SYSCTL_PPGPIO_P12 0x00001000 // GPIO Port N Present
|
|
#define SYSCTL_PPGPIO_P11 0x00000800 // GPIO Port M Present
|
|
#define SYSCTL_PPGPIO_P10 0x00000400 // GPIO Port L Present
|
|
#define SYSCTL_PPGPIO_P9 0x00000200 // GPIO Port K Present
|
|
#define SYSCTL_PPGPIO_P8 0x00000100 // GPIO Port J Present
|
|
#define SYSCTL_PPGPIO_P7 0x00000080 // GPIO Port H Present
|
|
#define SYSCTL_PPGPIO_P6 0x00000040 // GPIO Port G Present
|
|
#define SYSCTL_PPGPIO_P5 0x00000020 // GPIO Port F Present
|
|
#define SYSCTL_PPGPIO_P4 0x00000010 // GPIO Port E Present
|
|
#define SYSCTL_PPGPIO_P3 0x00000008 // GPIO Port D Present
|
|
#define SYSCTL_PPGPIO_P2 0x00000004 // GPIO Port C Present
|
|
#define SYSCTL_PPGPIO_P1 0x00000002 // GPIO Port B Present
|
|
#define SYSCTL_PPGPIO_P0 0x00000001 // GPIO Port A Present
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PPDMA register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PPDMA_P0 0x00000001 // uDMA Module Present
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PPHIB register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PPHIB_P0 0x00000001 // Hibernation Module Present
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PPUART register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PPUART_P7 0x00000080 // UART Module 7 Present
|
|
#define SYSCTL_PPUART_P6 0x00000040 // UART Module 6 Present
|
|
#define SYSCTL_PPUART_P5 0x00000020 // UART Module 5 Present
|
|
#define SYSCTL_PPUART_P4 0x00000010 // UART Module 4 Present
|
|
#define SYSCTL_PPUART_P3 0x00000008 // UART Module 3 Present
|
|
#define SYSCTL_PPUART_P2 0x00000004 // UART Module 2 Present
|
|
#define SYSCTL_PPUART_P1 0x00000002 // UART Module 1 Present
|
|
#define SYSCTL_PPUART_P0 0x00000001 // UART Module 0 Present
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PPSSI register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PPSSI_P3 0x00000008 // SSI Module 3 Present
|
|
#define SYSCTL_PPSSI_P2 0x00000004 // SSI Module 2 Present
|
|
#define SYSCTL_PPSSI_P1 0x00000002 // SSI Module 1 Present
|
|
#define SYSCTL_PPSSI_P0 0x00000001 // SSI Module 0 Present
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PPI2C register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PPI2C_P5 0x00000020 // I2C Module 5 Present
|
|
#define SYSCTL_PPI2C_P4 0x00000010 // I2C Module 4 Present
|
|
#define SYSCTL_PPI2C_P3 0x00000008 // I2C Module 3 Present
|
|
#define SYSCTL_PPI2C_P2 0x00000004 // I2C Module 2 Present
|
|
#define SYSCTL_PPI2C_P1 0x00000002 // I2C Module 1 Present
|
|
#define SYSCTL_PPI2C_P0 0x00000001 // I2C Module 0 Present
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PPUSB register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PPUSB_P0 0x00000001 // USB Module Present
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PPCAN register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PPCAN_P1 0x00000002 // CAN Module 1 Present
|
|
#define SYSCTL_PPCAN_P0 0x00000001 // CAN Module 0 Present
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PPADC register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PPADC_P1 0x00000002 // ADC Module 1 Present
|
|
#define SYSCTL_PPADC_P0 0x00000001 // ADC Module 0 Present
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PPACMP register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PPACMP_P0 0x00000001 // Analog Comparator Module Present
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PPPWM register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PPPWM_P1 0x00000002 // PWM Module 1 Present
|
|
#define SYSCTL_PPPWM_P0 0x00000001 // PWM Module 0 Present
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PPQEI register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PPQEI_P1 0x00000002 // QEI Module 1 Present
|
|
#define SYSCTL_PPQEI_P0 0x00000001 // QEI Module 0 Present
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PPLPC register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PPLPC_P0 0x00000001 // LPC Module Present
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PPPECI register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PPPECI_P0 0x00000001 // PECI Module Present
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PPFAN register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PPFAN_P0 0x00000001 // FAN Module Present
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PPEEPROM
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PPEEPROM_P0 0x00000001 // EEPROM Module Present
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PPWTIMER
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PPWTIMER_P5 0x00000020 // Wide Timer 5 Present
|
|
#define SYSCTL_PPWTIMER_P4 0x00000010 // Wide Timer 4 Present
|
|
#define SYSCTL_PPWTIMER_P3 0x00000008 // Wide Timer 3 Present
|
|
#define SYSCTL_PPWTIMER_P2 0x00000004 // Wide Timer 2 Present
|
|
#define SYSCTL_PPWTIMER_P1 0x00000002 // Wide Timer 1 Present
|
|
#define SYSCTL_PPWTIMER_P0 0x00000001 // Wide Timer 0 Present
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SRWD register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SRWD_R1 0x00000002 // Watchdog Timer 1 Software Reset
|
|
#define SYSCTL_SRWD_R0 0x00000001 // Watchdog Timer 0 Software Reset
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SRTIMER register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SRTIMER_R5 0x00000020 // Timer 5 Software Reset
|
|
#define SYSCTL_SRTIMER_R4 0x00000010 // Timer 4 Software Reset
|
|
#define SYSCTL_SRTIMER_R3 0x00000008 // Timer 3 Software Reset
|
|
#define SYSCTL_SRTIMER_R2 0x00000004 // Timer 2 Software Reset
|
|
#define SYSCTL_SRTIMER_R1 0x00000002 // Timer 1 Software Reset
|
|
#define SYSCTL_SRTIMER_R0 0x00000001 // Timer 0 Software Reset
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SRGPIO register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SRGPIO_R14 0x00004000 // GPIO Port Q Software Reset
|
|
#define SYSCTL_SRGPIO_R13 0x00002000 // GPIO Port P Software Reset
|
|
#define SYSCTL_SRGPIO_R12 0x00001000 // GPIO Port N Software Reset
|
|
#define SYSCTL_SRGPIO_R11 0x00000800 // GPIO Port M Software Reset
|
|
#define SYSCTL_SRGPIO_R10 0x00000400 // GPIO Port L Software Reset
|
|
#define SYSCTL_SRGPIO_R9 0x00000200 // GPIO Port K Software Reset
|
|
#define SYSCTL_SRGPIO_R8 0x00000100 // GPIO Port J Software Reset
|
|
#define SYSCTL_SRGPIO_R7 0x00000080 // GPIO Port H Software Reset
|
|
#define SYSCTL_SRGPIO_R6 0x00000040 // GPIO Port G Software Reset
|
|
#define SYSCTL_SRGPIO_R5 0x00000020 // GPIO Port F Software Reset
|
|
#define SYSCTL_SRGPIO_R4 0x00000010 // GPIO Port E Software Reset
|
|
#define SYSCTL_SRGPIO_R3 0x00000008 // GPIO Port D Software Reset
|
|
#define SYSCTL_SRGPIO_R2 0x00000004 // GPIO Port C Software Reset
|
|
#define SYSCTL_SRGPIO_R1 0x00000002 // GPIO Port B Software Reset
|
|
#define SYSCTL_SRGPIO_R0 0x00000001 // GPIO Port A Software Reset
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SRDMA register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SRDMA_R0 0x00000001 // uDMA Module Software Reset
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SRHIB register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SRHIB_R0 0x00000001 // Hibernation Module Software
|
|
// Reset
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SRUART register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SRUART_R7 0x00000080 // UART Module 7 Software Reset
|
|
#define SYSCTL_SRUART_R6 0x00000040 // UART Module 6 Software Reset
|
|
#define SYSCTL_SRUART_R5 0x00000020 // UART Module 5 Software Reset
|
|
#define SYSCTL_SRUART_R4 0x00000010 // UART Module 4 Software Reset
|
|
#define SYSCTL_SRUART_R3 0x00000008 // UART Module 3 Software Reset
|
|
#define SYSCTL_SRUART_R2 0x00000004 // UART Module 2 Software Reset
|
|
#define SYSCTL_SRUART_R1 0x00000002 // UART Module 1 Software Reset
|
|
#define SYSCTL_SRUART_R0 0x00000001 // UART Module 0 Software Reset
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SRSSI register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SRSSI_R3 0x00000008 // SSI Module 3 Software Reset
|
|
#define SYSCTL_SRSSI_R2 0x00000004 // SSI Module 2 Software Reset
|
|
#define SYSCTL_SRSSI_R1 0x00000002 // SSI Module 1 Software Reset
|
|
#define SYSCTL_SRSSI_R0 0x00000001 // SSI Module 0 Software Reset
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SRI2C register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SRI2C_R5 0x00000020 // I2C Module 5 Software Reset
|
|
#define SYSCTL_SRI2C_R4 0x00000010 // I2C Module 4 Software Reset
|
|
#define SYSCTL_SRI2C_R3 0x00000008 // I2C Module 3 Software Reset
|
|
#define SYSCTL_SRI2C_R2 0x00000004 // I2C Module 2 Software Reset
|
|
#define SYSCTL_SRI2C_R1 0x00000002 // I2C Module 1 Software Reset
|
|
#define SYSCTL_SRI2C_R0 0x00000001 // I2C Module 0 Software Reset
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SRUSB register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SRUSB_R0 0x00000001 // USB Module Software Reset
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SRCAN register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SRCAN_R1 0x00000002 // CAN Module 1 Software Reset
|
|
#define SYSCTL_SRCAN_R0 0x00000001 // CAN Module 0 Software Reset
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SRADC register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SRADC_R1 0x00000002 // ADC Module 1 Software Reset
|
|
#define SYSCTL_SRADC_R0 0x00000001 // ADC Module 0 Software Reset
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SRACMP register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SRACMP_R0 0x00000001 // Analog Comparator Module
|
|
// Software Reset
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SRPWM register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SRPWM_R1 0x00000002 // PWM Module 1 Software Reset
|
|
#define SYSCTL_SRPWM_R0 0x00000001 // PWM Module 0 Software Reset
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SRQEI register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SRQEI_R1 0x00000002 // QEI Module 1 Software Reset
|
|
#define SYSCTL_SRQEI_R0 0x00000001 // QEI Module 0 Software Reset
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SRLPC register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SRLPC_R0 0x00000001 // LPC Module Software Reset
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SRPECI register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SRPECI_R0 0x00000001 // PECI Module Software Reset
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SRFAN register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SRFAN_R0 0x00000001 // FAN Module Software Reset
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SREEPROM
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SREEPROM_R0 0x00000001 // EEPROM Module Software Reset
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SRWTIMER
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SRWTIMER_R5 0x00000020 // Wide Timer 5 Software Reset
|
|
#define SYSCTL_SRWTIMER_R4 0x00000010 // Wide Timer 4 Software Reset
|
|
#define SYSCTL_SRWTIMER_R3 0x00000008 // Wide Timer 3 Software Reset
|
|
#define SYSCTL_SRWTIMER_R2 0x00000004 // Wide Timer 2 Software Reset
|
|
#define SYSCTL_SRWTIMER_R1 0x00000002 // Wide Timer 1 Software Reset
|
|
#define SYSCTL_SRWTIMER_R0 0x00000001 // Wide Timer 0 Software Reset
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_RCGCWD register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_RCGCWD_R1 0x00000002 // Watchdog Timer 1 Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCWD_R0 0x00000001 // Watchdog Timer 0 Run Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_RCGCTIMER
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_RCGCTIMER_R5 0x00000020 // Timer 5 Run Mode Clock Gating
|
|
// Control
|
|
#define SYSCTL_RCGCTIMER_R4 0x00000010 // Timer 4 Run Mode Clock Gating
|
|
// Control
|
|
#define SYSCTL_RCGCTIMER_R3 0x00000008 // Timer 3 Run Mode Clock Gating
|
|
// Control
|
|
#define SYSCTL_RCGCTIMER_R2 0x00000004 // Timer 2 Run Mode Clock Gating
|
|
// Control
|
|
#define SYSCTL_RCGCTIMER_R1 0x00000002 // Timer 1 Run Mode Clock Gating
|
|
// Control
|
|
#define SYSCTL_RCGCTIMER_R0 0x00000001 // Timer 0 Run Mode Clock Gating
|
|
// Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_RCGCGPIO
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_RCGCGPIO_R14 0x00004000 // GPIO Port Q Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCGPIO_R13 0x00002000 // GPIO Port P Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCGPIO_R12 0x00001000 // GPIO Port N Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCGPIO_R11 0x00000800 // GPIO Port M Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCGPIO_R10 0x00000400 // GPIO Port L Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCGPIO_R9 0x00000200 // GPIO Port K Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCGPIO_R8 0x00000100 // GPIO Port J Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCGPIO_R7 0x00000080 // GPIO Port H Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCGPIO_R6 0x00000040 // GPIO Port G Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCGPIO_R5 0x00000020 // GPIO Port F Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCGPIO_R4 0x00000010 // GPIO Port E Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCGPIO_R3 0x00000008 // GPIO Port D Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCGPIO_R2 0x00000004 // GPIO Port C Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCGPIO_R1 0x00000002 // GPIO Port B Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCGPIO_R0 0x00000001 // GPIO Port A Run Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_RCGCDMA register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_RCGCDMA_R0 0x00000001 // uDMA Module Run Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_RCGCHIB register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_RCGCHIB_R0 0x00000001 // Hibernation Module Run Mode
|
|
// Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_RCGCUART
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_RCGCUART_R7 0x00000080 // UART Module 7 Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCUART_R6 0x00000040 // UART Module 6 Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCUART_R5 0x00000020 // UART Module 5 Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCUART_R4 0x00000010 // UART Module 4 Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCUART_R3 0x00000008 // UART Module 3 Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCUART_R2 0x00000004 // UART Module 2 Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCUART_R1 0x00000002 // UART Module 1 Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCUART_R0 0x00000001 // UART Module 0 Run Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_RCGCSSI register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_RCGCSSI_R3 0x00000008 // SSI Module 3 Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCSSI_R2 0x00000004 // SSI Module 2 Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCSSI_R1 0x00000002 // SSI Module 1 Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCSSI_R0 0x00000001 // SSI Module 0 Run Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_RCGCI2C register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_RCGCI2C_R5 0x00000020 // I2C Module 5 Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCI2C_R4 0x00000010 // I2C Module 4 Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCI2C_R3 0x00000008 // I2C Module 3 Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCI2C_R2 0x00000004 // I2C Module 2 Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCI2C_R1 0x00000002 // I2C Module 1 Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCI2C_R0 0x00000001 // I2C Module 0 Run Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_RCGCUSB register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_RCGCUSB_R0 0x00000001 // USB Module Run Mode Clock Gating
|
|
// Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_RCGCCAN register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_RCGCCAN_R1 0x00000002 // CAN Module 1 Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCCAN_R0 0x00000001 // CAN Module 0 Run Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_RCGCADC register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_RCGCADC_R1 0x00000002 // ADC Module 1 Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCADC_R0 0x00000001 // ADC Module 0 Run Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_RCGCACMP
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_RCGCACMP_R0 0x00000001 // Analog Comparator Module Run
|
|
// Mode Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_RCGCPWM register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_RCGCPWM_R1 0x00000002 // PWM Module 1 Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCPWM_R0 0x00000001 // PWM Module 0 Run Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_RCGCQEI register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_RCGCQEI_R1 0x00000002 // QEI Module 1 Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCQEI_R0 0x00000001 // QEI Module 0 Run Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_RCGCLPC register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_RCGCLPC_R0 0x00000001 // LPC Module Run Mode Clock Gating
|
|
// Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_RCGCPECI
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_RCGCPECI_R0 0x00000001 // PECI Module Run Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_RCGCFAN register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_RCGCFAN_R0 0x00000001 // FAN Module Run Mode Clock Gating
|
|
// Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_RCGCEEPROM
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_RCGCEEPROM_R0 0x00000001 // EEPROM Module Run Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_RCGCWTIMER
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_RCGCWTIMER_R5 0x00000020 // Wide Timer 5 Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCWTIMER_R4 0x00000010 // Wide Timer 4 Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCWTIMER_R3 0x00000008 // Wide Timer 3 Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCWTIMER_R2 0x00000004 // Wide Timer 2 Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCWTIMER_R1 0x00000002 // Wide Timer 1 Run Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_RCGCWTIMER_R0 0x00000001 // Wide Timer 0 Run Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SCGCWD register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SCGCWD_S1 0x00000002 // Watchdog Timer 1 Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_SCGCWD_S0 0x00000001 // Watchdog Timer 0 Sleep Mode
|
|
// Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SCGCTIMER
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SCGCTIMER_S5 0x00000020 // Timer 5 Sleep Mode Clock Gating
|
|
// Control
|
|
#define SYSCTL_SCGCTIMER_S4 0x00000010 // Timer 4 Sleep Mode Clock Gating
|
|
// Control
|
|
#define SYSCTL_SCGCTIMER_S3 0x00000008 // Timer 3 Sleep Mode Clock Gating
|
|
// Control
|
|
#define SYSCTL_SCGCTIMER_S2 0x00000004 // Timer 2 Sleep Mode Clock Gating
|
|
// Control
|
|
#define SYSCTL_SCGCTIMER_S1 0x00000002 // Timer 1 Sleep Mode Clock Gating
|
|
// Control
|
|
#define SYSCTL_SCGCTIMER_S0 0x00000001 // Timer 0 Sleep Mode Clock Gating
|
|
// Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SCGCGPIO
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SCGCGPIO_S14 0x00004000 // GPIO Port Q Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCGPIO_S13 0x00002000 // GPIO Port P Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCGPIO_S12 0x00001000 // GPIO Port N Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCGPIO_S11 0x00000800 // GPIO Port M Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCGPIO_S10 0x00000400 // GPIO Port L Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCGPIO_S9 0x00000200 // GPIO Port K Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCGPIO_S8 0x00000100 // GPIO Port J Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCGPIO_S7 0x00000080 // GPIO Port H Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCGPIO_S6 0x00000040 // GPIO Port G Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCGPIO_S5 0x00000020 // GPIO Port F Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCGPIO_S4 0x00000010 // GPIO Port E Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCGPIO_S3 0x00000008 // GPIO Port D Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCGPIO_S2 0x00000004 // GPIO Port C Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCGPIO_S1 0x00000002 // GPIO Port B Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCGPIO_S0 0x00000001 // GPIO Port A Sleep Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SCGCDMA register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SCGCDMA_S0 0x00000001 // uDMA Module Sleep Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SCGCHIB register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SCGCHIB_S0 0x00000001 // Hibernation Module Sleep Mode
|
|
// Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SCGCUART
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SCGCUART_S7 0x00000080 // UART Module 7 Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCUART_S6 0x00000040 // UART Module 6 Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCUART_S5 0x00000020 // UART Module 5 Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCUART_S4 0x00000010 // UART Module 4 Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCUART_S3 0x00000008 // UART Module 3 Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCUART_S2 0x00000004 // UART Module 2 Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCUART_S1 0x00000002 // UART Module 1 Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCUART_S0 0x00000001 // UART Module 0 Sleep Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SCGCSSI register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SCGCSSI_S3 0x00000008 // SSI Module 3 Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCSSI_S2 0x00000004 // SSI Module 2 Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCSSI_S1 0x00000002 // SSI Module 1 Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCSSI_S0 0x00000001 // SSI Module 0 Sleep Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SCGCI2C register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SCGCI2C_S5 0x00000020 // I2C Module 5 Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCI2C_S4 0x00000010 // I2C Module 4 Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCI2C_S3 0x00000008 // I2C Module 3 Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCI2C_S2 0x00000004 // I2C Module 2 Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCI2C_S1 0x00000002 // I2C Module 1 Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCI2C_S0 0x00000001 // I2C Module 0 Sleep Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SCGCUSB register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SCGCUSB_S0 0x00000001 // USB Module Sleep Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SCGCCAN register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SCGCCAN_S1 0x00000002 // CAN Module 1 Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCCAN_S0 0x00000001 // CAN Module 0 Sleep Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SCGCADC register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SCGCADC_S1 0x00000002 // ADC Module 1 Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCADC_S0 0x00000001 // ADC Module 0 Sleep Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SCGCACMP
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SCGCACMP_S0 0x00000001 // Analog Comparator Module Sleep
|
|
// Mode Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SCGCPWM register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SCGCPWM_S1 0x00000002 // PWM Module 1 Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCPWM_S0 0x00000001 // PWM Module 0 Sleep Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SCGCQEI register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SCGCQEI_S1 0x00000002 // QEI Module 1 Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCQEI_S0 0x00000001 // QEI Module 0 Sleep Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SCGCLPC register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SCGCLPC_S0 0x00000001 // LPC Module Sleep Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SCGCPECI
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SCGCPECI_S0 0x00000001 // PECI Module Sleep Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SCGCFAN register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SCGCFAN_S0 0x00000001 // FAN Module Sleep Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SCGCEEPROM
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SCGCEEPROM_S0 0x00000001 // EEPROM Module Sleep Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_SCGCWTIMER
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SCGCWTIMER_S5 0x00000020 // Wide Timer 5 Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCWTIMER_S4 0x00000010 // Wide Timer 4 Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCWTIMER_S3 0x00000008 // Wide Timer 3 Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCWTIMER_S2 0x00000004 // Wide Timer 2 Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCWTIMER_S1 0x00000002 // Wide Timer 1 Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_SCGCWTIMER_S0 0x00000001 // Wide Timer 0 Sleep Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DCGCWD register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DCGCWD_D1 0x00000002 // Watchdog Timer 1 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCWD_D0 0x00000001 // Watchdog Timer 0 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DCGCTIMER
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DCGCTIMER_D5 0x00000020 // Timer 5 Deep-Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_DCGCTIMER_D4 0x00000010 // Timer 4 Deep-Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_DCGCTIMER_D3 0x00000008 // Timer 3 Deep-Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_DCGCTIMER_D2 0x00000004 // Timer 2 Deep-Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_DCGCTIMER_D1 0x00000002 // Timer 1 Deep-Sleep Mode Clock
|
|
// Gating Control
|
|
#define SYSCTL_DCGCTIMER_D0 0x00000001 // Timer 0 Deep-Sleep Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DCGCGPIO
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DCGCGPIO_D14 0x00004000 // GPIO Port Q Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCGPIO_D13 0x00002000 // GPIO Port P Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCGPIO_D12 0x00001000 // GPIO Port N Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCGPIO_D11 0x00000800 // GPIO Port M Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCGPIO_D10 0x00000400 // GPIO Port L Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCGPIO_D9 0x00000200 // GPIO Port K Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCGPIO_D8 0x00000100 // GPIO Port J Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCGPIO_D7 0x00000080 // 0Mode Clock Gating Control
|
|
#define SYSCTL_DCGCGPIO_D6 0x00000040 // GPIO Port G Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCGPIO_D5 0x00000020 // GPIO Port F Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCGPIO_D4 0x00000010 // GPIO Port E Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCGPIO_D3 0x00000008 // GPIO Port D Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCGPIO_D2 0x00000004 // GPIO Port C Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCGPIO_D1 0x00000002 // GPIO Port B Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCGPIO_D0 0x00000001 // GPIO Port A Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DCGCDMA register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DCGCDMA_D0 0x00000001 // uDMA Module Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DCGCHIB register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DCGCHIB_D0 0x00000001 // Hibernation Module Deep-Sleep
|
|
// Mode Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DCGCUART
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DCGCUART_D7 0x00000080 // UART Module 7 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCUART_D6 0x00000040 // UART Module 6 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCUART_D5 0x00000020 // UART Module 5 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCUART_D4 0x00000010 // UART Module 4 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCUART_D3 0x00000008 // UART Module 3 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCUART_D2 0x00000004 // UART Module 2 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCUART_D1 0x00000002 // UART Module 1 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCUART_D0 0x00000001 // UART Module 0 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DCGCSSI register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DCGCSSI_D3 0x00000008 // SSI Module 3 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCSSI_D2 0x00000004 // SSI Module 2 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCSSI_D1 0x00000002 // SSI Module 1 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCSSI_D0 0x00000001 // SSI Module 0 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DCGCI2C register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DCGCI2C_D5 0x00000020 // I2C Module 5 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCI2C_D4 0x00000010 // I2C Module 4 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCI2C_D3 0x00000008 // I2C Module 3 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCI2C_D2 0x00000004 // I2C Module 2 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCI2C_D1 0x00000002 // I2C Module 1 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCI2C_D0 0x00000001 // I2C Module 0 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DCGCUSB register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DCGCUSB_D0 0x00000001 // USB Module Deep-Sleep Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DCGCCAN register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DCGCCAN_D1 0x00000002 // CAN Module 1 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCCAN_D0 0x00000001 // CAN Module 0 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DCGCADC register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DCGCADC_D1 0x00000002 // ADC Module 1 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCADC_D0 0x00000001 // ADC Module 0 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DCGCACMP
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DCGCACMP_D0 0x00000001 // Analog Comparator Module
|
|
// Deep-Sleep Mode Clock Gating
|
|
// Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DCGCPWM register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DCGCPWM_D1 0x00000002 // PWM Module 1 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCPWM_D0 0x00000001 // PWM Module 0 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DCGCQEI register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DCGCQEI_D1 0x00000002 // QEI Module 1 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCQEI_D0 0x00000001 // QEI Module 0 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DCGCLPC register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DCGCLPC_D0 0x00000001 // LPC Module Deep-Sleep Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DCGCPECI
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DCGCPECI_D0 0x00000001 // PECI Module Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DCGCFAN register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DCGCFAN_D0 0x00000001 // FAN Module Deep-Sleep Mode Clock
|
|
// Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DCGCEEPROM
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DCGCEEPROM_D0 0x00000001 // EEPROM Module Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_DCGCWTIMER
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DCGCWTIMER_D5 0x00000020 // Wide Timer 5 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCWTIMER_D4 0x00000010 // Wide Timer 4 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCWTIMER_D3 0x00000008 // Wide Timer 3 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCWTIMER_D2 0x00000004 // Wide Timer 2 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCWTIMER_D1 0x00000002 // Wide Timer 1 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
#define SYSCTL_DCGCWTIMER_D0 0x00000001 // Wide Timer 0 Deep-Sleep Mode
|
|
// Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PCWD register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PCWD_P1 0x00000002 // Watchdog Timer 1 Power Control
|
|
#define SYSCTL_PCWD_P0 0x00000001 // Watchdog Timer 0 Power Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PCTIMER register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PCTIMER_P5 0x00000020 // Timer 5 Power Control
|
|
#define SYSCTL_PCTIMER_P4 0x00000010 // Timer 4 Power Control
|
|
#define SYSCTL_PCTIMER_P3 0x00000008 // Timer 3 Power Control
|
|
#define SYSCTL_PCTIMER_P2 0x00000004 // Timer 2 Power Control
|
|
#define SYSCTL_PCTIMER_P1 0x00000002 // Timer 1 Power Control
|
|
#define SYSCTL_PCTIMER_P0 0x00000001 // Timer 0 Power Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PCGPIO register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PCGPIO_P14 0x00004000 // GPIO Port Q Power Control
|
|
#define SYSCTL_PCGPIO_P13 0x00002000 // GPIO Port P Power Control
|
|
#define SYSCTL_PCGPIO_P12 0x00001000 // GPIO Port N Power Control
|
|
#define SYSCTL_PCGPIO_P11 0x00000800 // GPIO Port M Power Control
|
|
#define SYSCTL_PCGPIO_P10 0x00000400 // GPIO Port L Power Control
|
|
#define SYSCTL_PCGPIO_P9 0x00000200 // GPIO Port K Power Control
|
|
#define SYSCTL_PCGPIO_P8 0x00000100 // GPIO Port J Power Control
|
|
#define SYSCTL_PCGPIO_P7 0x00000080 // GPIO Port H Power Control
|
|
#define SYSCTL_PCGPIO_P6 0x00000040 // GPIO Port G Power Control
|
|
#define SYSCTL_PCGPIO_P5 0x00000020 // GPIO Port F Power Control
|
|
#define SYSCTL_PCGPIO_P4 0x00000010 // GPIO Port E Power Control
|
|
#define SYSCTL_PCGPIO_P3 0x00000008 // GPIO Port D Power Control
|
|
#define SYSCTL_PCGPIO_P2 0x00000004 // GPIO Port C Power Control
|
|
#define SYSCTL_PCGPIO_P1 0x00000002 // GPIO Port B Power Control
|
|
#define SYSCTL_PCGPIO_P0 0x00000001 // GPIO Port A Power Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PCDMA register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PCDMA_P0 0x00000001 // uDMA Module Power Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PCHIB register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PCHIB_P0 0x00000001 // Hibernation Module Power Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PCUART register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PCUART_P7 0x00000080 // UART Module 7 Power Control
|
|
#define SYSCTL_PCUART_P6 0x00000040 // UART Module 6 Power Control
|
|
#define SYSCTL_PCUART_P5 0x00000020 // UART Module 5 Power Control
|
|
#define SYSCTL_PCUART_P4 0x00000010 // UART Module 4 Power Control
|
|
#define SYSCTL_PCUART_P3 0x00000008 // UART Module 3 Power Control
|
|
#define SYSCTL_PCUART_P2 0x00000004 // UART Module 2 Power Control
|
|
#define SYSCTL_PCUART_P1 0x00000002 // UART Module 1 Power Control
|
|
#define SYSCTL_PCUART_P0 0x00000001 // UART Module 0 Power Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PCSSI register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PCSSI_P3 0x00000008 // SSI Module 3 Power Control
|
|
#define SYSCTL_PCSSI_P2 0x00000004 // SSI Module 2 Power Control
|
|
#define SYSCTL_PCSSI_P1 0x00000002 // SSI Module 1 Power Control
|
|
#define SYSCTL_PCSSI_P0 0x00000001 // SSI Module 0 Power Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PCI2C register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PCI2C_P5 0x00000020 // I2C Module 5 Power Control
|
|
#define SYSCTL_PCI2C_P4 0x00000010 // I2C Module 4 Power Control
|
|
#define SYSCTL_PCI2C_P3 0x00000008 // I2C Module 3 Power Control
|
|
#define SYSCTL_PCI2C_P2 0x00000004 // I2C Module 2 Power Control
|
|
#define SYSCTL_PCI2C_P1 0x00000002 // I2C Module 1 Power Control
|
|
#define SYSCTL_PCI2C_P0 0x00000001 // I2C Module 0 Power Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PCUSB register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PCUSB_P0 0x00000001 // USB Module Power Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PCCAN register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PCCAN_P1 0x00000002 // CAN Module 1 Power Control
|
|
#define SYSCTL_PCCAN_P0 0x00000001 // CAN Module 0 Power Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PCADC register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PCADC_P1 0x00000002 // ADC Module 1 Power Control
|
|
#define SYSCTL_PCADC_P0 0x00000001 // ADC Module 0 Power Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PCACMP register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PCACMP_P0 0x00000001 // Analog Comparator Module 0 Power
|
|
// Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PCPWM register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PCPWM_P1 0x00000002 // PWM Module 1 Power Control
|
|
#define SYSCTL_PCPWM_P0 0x00000001 // PWM Module 0 Power Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PCQEI register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PCQEI_P1 0x00000002 // QEI Module 1 Power Control
|
|
#define SYSCTL_PCQEI_P0 0x00000001 // QEI Module 0 Power Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PCLPC register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PCLPC_P0 0x00000001 // LPC Module Power Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PCPECI register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PCPECI_P0 0x00000001 // PECI Module Power Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PCFAN register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PCFAN_P0 0x00000001 // FAN Module Power Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PCEEPROM
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PCEEPROM_P0 0x00000001 // EEPROM Module Power Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PCWTIMER
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PCWTIMER_P5 0x00000020 // Wide Timer 5 Power Control
|
|
#define SYSCTL_PCWTIMER_P4 0x00000010 // Wide Timer 4 Power Control
|
|
#define SYSCTL_PCWTIMER_P3 0x00000008 // Wide Timer 3 Power Control
|
|
#define SYSCTL_PCWTIMER_P2 0x00000004 // Wide Timer 2 Power Control
|
|
#define SYSCTL_PCWTIMER_P1 0x00000002 // Wide Timer 1 Power Control
|
|
#define SYSCTL_PCWTIMER_P0 0x00000001 // Wide Timer 0 Power Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PRWD register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PRWD_R1 0x00000002 // Watchdog Timer 1 Peripheral
|
|
// Ready
|
|
#define SYSCTL_PRWD_R0 0x00000001 // Watchdog Timer 0 Peripheral
|
|
// Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PRTIMER register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PRTIMER_R5 0x00000020 // Timer 5 Peripheral Ready
|
|
#define SYSCTL_PRTIMER_R4 0x00000010 // Timer 4 Peripheral Ready
|
|
#define SYSCTL_PRTIMER_R3 0x00000008 // Timer 3 Peripheral Ready
|
|
#define SYSCTL_PRTIMER_R2 0x00000004 // Timer 2 Peripheral Ready
|
|
#define SYSCTL_PRTIMER_R1 0x00000002 // Timer 1 Peripheral Ready
|
|
#define SYSCTL_PRTIMER_R0 0x00000001 // Timer 0 Peripheral Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PRGPIO register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PRGPIO_R14 0x00004000 // GPIO Port Q Peripheral Ready
|
|
#define SYSCTL_PRGPIO_R13 0x00002000 // GPIO Port P Peripheral Ready
|
|
#define SYSCTL_PRGPIO_R12 0x00001000 // GPIO Port N Peripheral Ready
|
|
#define SYSCTL_PRGPIO_R11 0x00000800 // GPIO Port M Peripheral Ready
|
|
#define SYSCTL_PRGPIO_R10 0x00000400 // GPIO Port L Peripheral Ready
|
|
#define SYSCTL_PRGPIO_R9 0x00000200 // GPIO Port K Peripheral Ready
|
|
#define SYSCTL_PRGPIO_R8 0x00000100 // GPIO Port J Peripheral Ready
|
|
#define SYSCTL_PRGPIO_R7 0x00000080 // GPIO Port H Peripheral Ready
|
|
#define SYSCTL_PRGPIO_R6 0x00000040 // GPIO Port G Peripheral Ready
|
|
#define SYSCTL_PRGPIO_R5 0x00000020 // GPIO Port F Peripheral Ready
|
|
#define SYSCTL_PRGPIO_R4 0x00000010 // GPIO Port E Peripheral Ready
|
|
#define SYSCTL_PRGPIO_R3 0x00000008 // GPIO Port D Peripheral Ready
|
|
#define SYSCTL_PRGPIO_R2 0x00000004 // GPIO Port C Peripheral Ready
|
|
#define SYSCTL_PRGPIO_R1 0x00000002 // GPIO Port B Peripheral Ready
|
|
#define SYSCTL_PRGPIO_R0 0x00000001 // GPIO Port A Peripheral Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PRDMA register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PRDMA_R0 0x00000001 // uDMA Module Peripheral Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PRHIB register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PRHIB_R0 0x00000001 // Hibernation Module Peripheral
|
|
// Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PRUART register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PRUART_R7 0x00000080 // UART Module 7 Peripheral Ready
|
|
#define SYSCTL_PRUART_R6 0x00000040 // UART Module 6 Peripheral Ready
|
|
#define SYSCTL_PRUART_R5 0x00000020 // UART Module 5 Peripheral Ready
|
|
#define SYSCTL_PRUART_R4 0x00000010 // UART Module 4 Peripheral Ready
|
|
#define SYSCTL_PRUART_R3 0x00000008 // UART Module 3 Peripheral Ready
|
|
#define SYSCTL_PRUART_R2 0x00000004 // UART Module 2 Peripheral Ready
|
|
#define SYSCTL_PRUART_R1 0x00000002 // UART Module 1 Peripheral Ready
|
|
#define SYSCTL_PRUART_R0 0x00000001 // UART Module 0 Peripheral Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PRSSI register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PRSSI_R3 0x00000008 // SSI Module 3 Peripheral Ready
|
|
#define SYSCTL_PRSSI_R2 0x00000004 // SSI Module 2 Peripheral Ready
|
|
#define SYSCTL_PRSSI_R1 0x00000002 // SSI Module 1 Peripheral Ready
|
|
#define SYSCTL_PRSSI_R0 0x00000001 // SSI Module 0 Peripheral Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PRI2C register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PRI2C_R5 0x00000020 // I2C Module 5 Peripheral Ready
|
|
#define SYSCTL_PRI2C_R4 0x00000010 // I2C Module 4 Peripheral Ready
|
|
#define SYSCTL_PRI2C_R3 0x00000008 // I2C Module 3 Peripheral Ready
|
|
#define SYSCTL_PRI2C_R2 0x00000004 // I2C Module 2 Peripheral Ready
|
|
#define SYSCTL_PRI2C_R1 0x00000002 // I2C Module 1 Peripheral Ready
|
|
#define SYSCTL_PRI2C_R0 0x00000001 // I2C Module 0 Peripheral Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PRUSB register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PRUSB_R0 0x00000001 // USB Module Peripheral Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PRCAN register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PRCAN_R1 0x00000002 // CAN Module 1 Peripheral Ready
|
|
#define SYSCTL_PRCAN_R0 0x00000001 // CAN Module 0 Peripheral Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PRADC register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PRADC_R1 0x00000002 // ADC Module 1 Peripheral Ready
|
|
#define SYSCTL_PRADC_R0 0x00000001 // ADC Module 0 Peripheral Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PRACMP register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PRACMP_R0 0x00000001 // Analog Comparator Module
|
|
// Peripheral Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PRPWM register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PRPWM_R1 0x00000002 // PWM Module 1 Peripheral Ready
|
|
#define SYSCTL_PRPWM_R0 0x00000001 // PWM Module 0 Peripheral Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PRQEI register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PRQEI_R1 0x00000002 // QEI Module 1 Peripheral Ready
|
|
#define SYSCTL_PRQEI_R0 0x00000001 // QEI Module 0 Peripheral Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PRLPC register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PRLPC_R0 0x00000001 // LPC Module Peripheral Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PRPECI register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PRPECI_R0 0x00000001 // PECI Module Peripheral Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PRFAN register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PRFAN_R0 0x00000001 // FAN Module Peripheral Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PREEPROM
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PREEPROM_R0 0x00000001 // EEPROM Module Peripheral Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the SYSCTL_PRWTIMER
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PRWTIMER_R5 0x00000020 // Wide Timer 5 Peripheral Ready
|
|
#define SYSCTL_PRWTIMER_R4 0x00000010 // Wide Timer 4 Peripheral Ready
|
|
#define SYSCTL_PRWTIMER_R3 0x00000008 // Wide Timer 3 Peripheral Ready
|
|
#define SYSCTL_PRWTIMER_R2 0x00000004 // Wide Timer 2 Peripheral Ready
|
|
#define SYSCTL_PRWTIMER_R1 0x00000002 // Wide Timer 1 Peripheral Ready
|
|
#define SYSCTL_PRWTIMER_R0 0x00000001 // Wide Timer 0 Peripheral Ready
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following definitions are deprecated.
|
|
//
|
|
//*****************************************************************************
|
|
#ifndef DEPRECATED
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are deprecated defines for the System Control register
|
|
// addresses.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_GPIOHSCTL 0x400FE06C // GPIO High-Speed Control
|
|
#define SYSCTL_USER0 0x400FE1E0 // NV User Register 0
|
|
#define SYSCTL_USER1 0x400FE1E4 // NV User Register 1
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are deprecated defines for the bit fields in the SYSCTL_DID0
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DID0_VER_MASK 0x70000000 // DID0 version mask
|
|
#define SYSCTL_DID0_CLASS_MASK 0x00FF0000 // Device Class
|
|
#define SYSCTL_DID0_MAJ_MASK 0x0000FF00 // Major revision mask
|
|
#define SYSCTL_DID0_MAJ_A 0x00000000 // Major revision A
|
|
#define SYSCTL_DID0_MAJ_B 0x00000100 // Major revision B
|
|
#define SYSCTL_DID0_MAJ_C 0x00000200 // Major revision C
|
|
#define SYSCTL_DID0_MIN_MASK 0x000000FF // Minor revision mask
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are deprecated defines for the bit fields in the SYSCTL_DID1
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DID1_VER_MASK 0xF0000000 // Register version mask
|
|
#define SYSCTL_DID1_FAM_MASK 0x0F000000 // Family mask
|
|
#define SYSCTL_DID1_FAM_S 0x00000000 // Stellaris family
|
|
#define SYSCTL_DID1_PRTNO_MASK 0x00FF0000 // Part number mask
|
|
#define SYSCTL_DID1_PINCNT_MASK 0x0000E000 // Pin count
|
|
#define SYSCTL_DID1_TEMP_MASK 0x000000E0 // Temperature range mask
|
|
#define SYSCTL_DID1_PKG_MASK 0x00000018 // Package mask
|
|
#define SYSCTL_DID1_PKG_48QFP 0x00000008 // QFP package
|
|
#define SYSCTL_DID1_QUAL_MASK 0x00000003 // Qualification status mask
|
|
#define SYSCTL_DID1_PKG_28SOIC 0x00000000 // SOIC package
|
|
#define SYSCTL_DID1_PRTNO_SHIFT 16
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are deprecated defines for the bit fields in the SYSCTL_DC0
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DC0_SRAMSZ_MASK 0xFFFF0000 // SRAM size mask
|
|
#define SYSCTL_DC0_FLASHSZ_MASK 0x0000FFFF // Flash size mask
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are deprecated defines for the bit fields in the SYSCTL_DC1
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DC1_PWM 0x00100000 // PWM Module Present
|
|
#define SYSCTL_DC1_ADC 0x00010000 // ADC Module Present
|
|
#define SYSCTL_DC1_SYSDIV_MASK 0x0000F000 // Minimum system divider mask
|
|
#define SYSCTL_DC1_ADCSPD_MASK 0x00000F00 // ADC speed mask
|
|
#define SYSCTL_DC1_ADCSPD_M 0x00000F00 // Max ADC Speed
|
|
#define SYSCTL_DC1_ADCSPD_125K 0x00000000 // 125Ksps ADC
|
|
#define SYSCTL_DC1_ADCSPD_250K 0x00000100 // 250K samples/second
|
|
#define SYSCTL_DC1_ADCSPD_500K 0x00000200 // 500K samples/second
|
|
#define SYSCTL_DC1_ADCSPD_1M 0x00000300 // 1M samples/second
|
|
#define SYSCTL_DC1_WDOG 0x00000008 // Watchdog present
|
|
#define SYSCTL_DC1_WDT 0x00000008 // Watchdog Timer Present
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are deprecated defines for the bit fields in the SYSCTL_DC2
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DC2_I2C 0x00001000 // I2C present
|
|
#define SYSCTL_DC2_QEI 0x00000100 // QEI present
|
|
#define SYSCTL_DC2_SSI 0x00000010 // SSI present
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are deprecated defines for the bit fields in the SYSCTL_DC3
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DC3_ADC7 0x00800000 // ADC7 Pin Present
|
|
#define SYSCTL_DC3_ADC6 0x00400000 // ADC6 Pin Present
|
|
#define SYSCTL_DC3_ADC5 0x00200000 // ADC5 Pin Present
|
|
#define SYSCTL_DC3_ADC4 0x00100000 // ADC4 Pin Present
|
|
#define SYSCTL_DC3_ADC3 0x00080000 // ADC3 Pin Present
|
|
#define SYSCTL_DC3_ADC2 0x00040000 // ADC2 Pin Present
|
|
#define SYSCTL_DC3_ADC1 0x00020000 // ADC1 Pin Present
|
|
#define SYSCTL_DC3_ADC0 0x00010000 // ADC0 Pin Present
|
|
#define SYSCTL_DC3_MC_FAULT0 0x00008000 // MC0 fault pin present
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are deprecated defines for the bit fields in the
|
|
// SYSCTL_PBORCTL register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PBORCTL_BOR_MASK 0x0000FFFC // BOR wait timer
|
|
#define SYSCTL_PBORCTL_BOR_SH 2
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are deprecated defines for the bit fields in the
|
|
// SYSCTL_LDOPCTL register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_LDOPCTL_MASK 0x0000003F // Voltage adjust mask
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are deprecated defines for the bit fields in the SYSCTL_SRCR0
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SRCR0_PWM 0x00100000 // PWM Reset Control
|
|
#define SYSCTL_SRCR0_ADC 0x00010000 // ADC0 Reset Control
|
|
#define SYSCTL_SRCR0_WDT 0x00000008 // WDT Reset Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are deprecated defines for the bit fields in the SYSCTL_RESC
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_RESC_WDOG 0x00000008 // Watchdog reset
|
|
#define SYSCTL_RESC_WDT 0x00000008 // Watchdog Timer Reset
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are deprecated defines for the bit fields in the SYSCTL_RCC
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_RCC_SYSDIV_MASK 0x07800000 // System clock divider
|
|
#define SYSCTL_RCC_USE_SYSDIV 0x00400000 // Use sytem clock divider
|
|
#define SYSCTL_RCC_USE_PWMDIV 0x00100000 // Use PWM clock divider
|
|
#define SYSCTL_RCC_PWMDIV_MASK 0x000E0000 // PWM clock divider
|
|
#define SYSCTL_RCC_OE 0x00001000 // PLL output enable
|
|
#define SYSCTL_RCC_XTAL_3_68MHz 0x00000140 // Using a 3.6864 MHz crystal
|
|
#define SYSCTL_RCC_XTAL_4MHz 0x00000180 // Using a 4 MHz crystal
|
|
#define SYSCTL_RCC_XTAL_MASK 0x000003C0 // Crystal attached to main osc
|
|
#define SYSCTL_RCC_OSCSRC_MASK 0x00000030 // Oscillator input select
|
|
#define SYSCTL_RCC_SYSDIV_SHIFT 23 // Shift to the SYSDIV field
|
|
#define SYSCTL_RCC_PWMDIV_SHIFT 17 // Shift to the PWMDIV field
|
|
#define SYSCTL_RCC_XTAL_SHIFT 6 // Shift to the XTAL field
|
|
#define SYSCTL_RCC_OSCSRC_SHIFT 4 // Shift to the OSCSRC field
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are deprecated defines for the bit fields in the SYSCTL_PLLCFG
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_PLLCFG_OD_MASK 0x0000C000 // Output divider
|
|
#define SYSCTL_PLLCFG_F_MASK 0x00003FE0 // PLL multiplier
|
|
#define SYSCTL_PLLCFG_R_MASK 0x0000001F // Input predivider
|
|
#define SYSCTL_PLLCFG_F_SHIFT 5
|
|
#define SYSCTL_PLLCFG_R_SHIFT 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are deprecated defines for the bit fields in the
|
|
// SYSCTL_GPIOHSCTL register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_GPIOHSCTL_PORTA 0x00000001 // Port A High-Speed
|
|
#define SYSCTL_GPIOHSCTL_PORTB 0x00000002 // Port B High-Speed
|
|
#define SYSCTL_GPIOHSCTL_PORTC 0x00000004 // Port C High-Speed
|
|
#define SYSCTL_GPIOHSCTL_PORTD 0x00000008 // Port D High-Speed
|
|
#define SYSCTL_GPIOHSCTL_PORTE 0x00000010 // Port E High-Speed
|
|
#define SYSCTL_GPIOHSCTL_PORTF 0x00000020 // Port F High-Speed
|
|
#define SYSCTL_GPIOHSCTL_PORTG 0x00000040 // Port G High-Speed
|
|
#define SYSCTL_GPIOHSCTL_PORTH 0x00000080 // Port H High-Speed
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are deprecated defines for the bit fields in the SYSCTL_RCC2
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_RCC2_USEFRACT 0x40000000 // Use fractional divider
|
|
#define SYSCTL_RCC2_SYSDIV2_MSK 0x1F800000 // System clock divider
|
|
#define SYSCTL_RCC2_FRACT 0x00400000 // Fractional divide
|
|
#define SYSCTL_RCC2_OSCSRC2_MSK 0x00000070 // Oscillator input select
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are deprecated defines for the bit fields in the SYSCTL_RCGC0
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_RCGC0_PWM 0x00100000 // PWM Clock Gating Control
|
|
#define SYSCTL_RCGC0_ADC 0x00010000 // ADC0 Clock Gating Control
|
|
#define SYSCTL_RCGC0_WDT 0x00000008 // WDT Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are deprecated defines for the bit fields in the SYSCTL_SCGC0
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SCGC0_PWM 0x00100000 // PWM Clock Gating Control
|
|
#define SYSCTL_SCGC0_ADC 0x00010000 // ADC0 Clock Gating Control
|
|
#define SYSCTL_SCGC0_WDT 0x00000008 // WDT Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are deprecated defines for the bit fields in the SYSCTL_DCGC0
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DCGC0_PWM 0x00100000 // PWM Clock Gating Control
|
|
#define SYSCTL_DCGC0_ADC 0x00010000 // ADC0 Clock Gating Control
|
|
#define SYSCTL_DCGC0_WDT 0x00000008 // WDT Clock Gating Control
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are deprecated defines for the bit fields in the
|
|
// SYSCTL_DSLPCLKCFG register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_DSLPCLKCFG_D_MSK 0x1F800000 // Deep sleep system clock override
|
|
#define SYSCTL_DSLPCLKCFG_O_MSK 0x00000070 // Deep sleep oscillator override
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are deprecated defines for the bit fields in the
|
|
// SYSCTL_CLKVCLR register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_CLKVCLR_CLR 0x00000001 // Clear clock verification fault
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are deprecated defines for the bit fields in the
|
|
// SYSCTL_LDOARST register.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_LDOARST_ARST 0x00000001 // Allow LDO to reset device
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are deprecated defines for the bit fields in the SYSCTL_SRCR0,
|
|
// SYSCTL_RCGC0, SYSCTL_SCGC0, and SYSCTL_DCGC0 registers.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SET0_CAN2 0x04000000 // CAN 2 module
|
|
#define SYSCTL_SET0_CAN1 0x02000000 // CAN 1 module
|
|
#define SYSCTL_SET0_CAN0 0x01000000 // CAN 0 module
|
|
#define SYSCTL_SET0_PWM 0x00100000 // PWM module
|
|
#define SYSCTL_SET0_ADC 0x00010000 // ADC module
|
|
#define SYSCTL_SET0_ADCSPD_MASK 0x00000F00 // ADC speed mask
|
|
#define SYSCTL_SET0_ADCSPD_125K 0x00000000 // 125Ksps ADC
|
|
#define SYSCTL_SET0_ADCSPD_250K 0x00000100 // 250Ksps ADC
|
|
#define SYSCTL_SET0_ADCSPD_500K 0x00000200 // 500Ksps ADC
|
|
#define SYSCTL_SET0_ADCSPD_1M 0x00000300 // 1Msps ADC
|
|
#define SYSCTL_SET0_HIB 0x00000040 // Hibernation module
|
|
#define SYSCTL_SET0_WDOG 0x00000008 // Watchdog module
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are deprecated defines for the bit fields in the SYSCTL_SRCR1,
|
|
// SYSCTL_RCGC1, SYSCTL_SCGC1, and SYSCTL_DCGC1 registers.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SET1_COMP2 0x04000000 // Analog comparator module 2
|
|
#define SYSCTL_SET1_COMP1 0x02000000 // Analog comparator module 1
|
|
#define SYSCTL_SET1_COMP0 0x01000000 // Analog comparator module 0
|
|
#define SYSCTL_SET1_TIMER3 0x00080000 // Timer module 3
|
|
#define SYSCTL_SET1_TIMER2 0x00040000 // Timer module 2
|
|
#define SYSCTL_SET1_TIMER1 0x00020000 // Timer module 1
|
|
#define SYSCTL_SET1_TIMER0 0x00010000 // Timer module 0
|
|
#define SYSCTL_SET1_I2C1 0x00002000 // I2C module 1
|
|
#define SYSCTL_SET1_I2C0 0x00001000 // I2C module 0
|
|
#define SYSCTL_SET1_I2C 0x00001000 // I2C module
|
|
#define SYSCTL_SET1_QEI1 0x00000200 // QEI module 1
|
|
#define SYSCTL_SET1_QEI 0x00000100 // QEI module
|
|
#define SYSCTL_SET1_QEI0 0x00000100 // QEI module 0
|
|
#define SYSCTL_SET1_SSI1 0x00000020 // SSI module 1
|
|
#define SYSCTL_SET1_SSI0 0x00000010 // SSI module 0
|
|
#define SYSCTL_SET1_SSI 0x00000010 // SSI module
|
|
#define SYSCTL_SET1_UART2 0x00000004 // UART module 2
|
|
#define SYSCTL_SET1_UART1 0x00000002 // UART module 1
|
|
#define SYSCTL_SET1_UART0 0x00000001 // UART module 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are deprecated defines for the bit fields in the SYSCTL_SRCR2,
|
|
// SYSCTL_RCGC2, SYSCTL_SCGC2, and SYSCTL_DCGC2 registers.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_SET2_ETH 0x50000000 // ETH module
|
|
#define SYSCTL_SET2_GPIOH 0x00000080 // GPIO H module
|
|
#define SYSCTL_SET2_GPIOG 0x00000040 // GPIO G module
|
|
#define SYSCTL_SET2_GPIOF 0x00000020 // GPIO F module
|
|
#define SYSCTL_SET2_GPIOE 0x00000010 // GPIO E module
|
|
#define SYSCTL_SET2_GPIOD 0x00000008 // GPIO D module
|
|
#define SYSCTL_SET2_GPIOC 0x00000004 // GPIO C module
|
|
#define SYSCTL_SET2_GPIOB 0x00000002 // GPIO B module
|
|
#define SYSCTL_SET2_GPIOA 0x00000001 // GIPO A module
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are deprecated defines for the bit fields in the SYSCTL_RIS,
|
|
// SYSCTL_IMC, and SYSCTL_IMS registers.
|
|
//
|
|
//*****************************************************************************
|
|
#define SYSCTL_INT_PLL_LOCK 0x00000040 // PLL lock interrupt
|
|
#define SYSCTL_INT_CUR_LIMIT 0x00000020 // Current limit interrupt
|
|
#define SYSCTL_INT_IOSC_FAIL 0x00000010 // Internal oscillator failure int
|
|
#define SYSCTL_INT_MOSC_FAIL 0x00000008 // Main oscillator failure int
|
|
#define SYSCTL_INT_POR 0x00000004 // Power on reset interrupt
|
|
#define SYSCTL_INT_BOR 0x00000002 // Brown out interrupt
|
|
#define SYSCTL_INT_PLL_FAIL 0x00000001 // PLL failure interrupt
|
|
|
|
#endif
|
|
|
|
#endif // __HW_SYSCTL_H__
|