396 lines
9.1 KiB
C
396 lines
9.1 KiB
C
/**************************************************************************//**
|
|
*
|
|
* @copyright (C) 2020 Nuvoton Technology Corp. All rights reserved.
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*
|
|
* Change Logs:
|
|
* Date Author Notes
|
|
* 2020-7-21 Egbert First version
|
|
*
|
|
******************************************************************************/
|
|
|
|
#include <rtconfig.h>
|
|
|
|
#if defined(BSP_USING_SCUART)
|
|
|
|
#include "NuMicro.h"
|
|
#include <rtdevice.h>
|
|
#include <rthw.h>
|
|
|
|
/* Private definition
|
|
* ---------------------------------------------------------------*/
|
|
#define LOG_TAG "drv.scuart"
|
|
#define DBG_ENABLE
|
|
#define DBG_SECTION_NAME "drv.scuart"
|
|
#define DBG_LEVEL DBG_ERROR
|
|
#define DBG_COLOR
|
|
#include <rtdbg.h>
|
|
|
|
enum
|
|
{
|
|
SCUART_START = -1,
|
|
#if defined(BSP_USING_SCUART0)
|
|
SCUART0_IDX,
|
|
#endif
|
|
#if defined(BSP_USING_SCUART1)
|
|
SCUART1_IDX,
|
|
#endif
|
|
#if defined(BSP_USING_SCUART2)
|
|
SCUART2_IDX,
|
|
#endif
|
|
SCUART_CNT
|
|
};
|
|
|
|
/* Private typedef
|
|
* --------------------------------------------------------------*/
|
|
struct nu_scuart
|
|
{
|
|
rt_serial_t dev;
|
|
char *name;
|
|
SC_T *scuart_base;
|
|
uint32_t scuart_rst;
|
|
IRQn_Type scuart_irq_n;
|
|
};
|
|
typedef struct nu_scuart *nu_scuart_t;
|
|
|
|
/* Private functions
|
|
* ------------------------------------------------------------*/
|
|
static rt_err_t nu_scuart_configure(struct rt_serial_device *serial,
|
|
struct serial_configure *cfg);
|
|
static rt_err_t nu_scuart_control(struct rt_serial_device *serial, int cmd,
|
|
void *arg);
|
|
static int nu_scuart_send(struct rt_serial_device *serial, char c);
|
|
static int nu_scuart_receive(struct rt_serial_device *serial);
|
|
static void nu_scuart_isr(nu_scuart_t serial);
|
|
|
|
static const struct rt_uart_ops nu_scuart_ops =
|
|
{
|
|
.configure = nu_scuart_configure,
|
|
.control = nu_scuart_control,
|
|
.putc = nu_scuart_send,
|
|
.getc = nu_scuart_receive,
|
|
.dma_transmit = RT_NULL /* not support DMA mode */
|
|
};
|
|
|
|
static const struct serial_configure nu_scuart_default_config =
|
|
RT_SERIAL_CONFIG_DEFAULT;
|
|
|
|
static struct nu_scuart nu_scuart_arr[] =
|
|
{
|
|
#if defined(BSP_USING_SCUART0)
|
|
{
|
|
.name = "scuart0",
|
|
.scuart_base = SC0,
|
|
.scuart_rst = SC0_RST,
|
|
.scuart_irq_n = SC0_IRQn,
|
|
},
|
|
#endif
|
|
|
|
#if defined(BSP_USING_SCUART1)
|
|
{
|
|
.name = "scuart1",
|
|
.scuart_base = SC1,
|
|
.scuart_rst = SC1_RST,
|
|
.scuart_irq_n = SC1_IRQn,
|
|
},
|
|
#endif
|
|
|
|
#if defined(BSP_USING_SCUART2)
|
|
{
|
|
.name = "scuart2",
|
|
.scuart_base = SC2,
|
|
.scuart_rst = SC2_RST,
|
|
.scuart_irq_n = SC2_IRQn,
|
|
},
|
|
#endif
|
|
|
|
{0}
|
|
}; /* scuart nu_scuart */
|
|
|
|
/* Interrupt Handle Function
|
|
* ----------------------------------------------------*/
|
|
#if defined(BSP_USING_SCUART0)
|
|
/* SCUART0 interrupt entry */
|
|
void SC0_IRQHandler(void)
|
|
{
|
|
/* enter interrupt */
|
|
rt_interrupt_enter();
|
|
|
|
nu_scuart_isr(&nu_scuart_arr[SCUART0_IDX]);
|
|
|
|
/* leave interrupt */
|
|
rt_interrupt_leave();
|
|
}
|
|
#endif
|
|
|
|
#if defined(BSP_USING_SCUART1)
|
|
/* SCUART1 interrupt entry */
|
|
void SC1_IRQHandler(void)
|
|
{
|
|
/* enter interrupt */
|
|
rt_interrupt_enter();
|
|
|
|
nu_scuart_isr(&nu_scuart_arr[SCUART1_IDX]);
|
|
|
|
/* leave interrupt */
|
|
rt_interrupt_leave();
|
|
}
|
|
#endif
|
|
|
|
#if defined(BSP_USING_SCUART2)
|
|
/* SCUART2 interrupt entry */
|
|
void SC2_IRQHandler(void)
|
|
{
|
|
/* enter interrupt */
|
|
rt_interrupt_enter();
|
|
|
|
nu_scuart_isr(&nu_scuart_arr[SCUART2_IDX]);
|
|
|
|
/* leave interrupt */
|
|
rt_interrupt_leave();
|
|
}
|
|
#endif
|
|
|
|
/**
|
|
* All SCUART interrupt service routine
|
|
*/
|
|
static void nu_scuart_isr(nu_scuart_t serial)
|
|
{
|
|
/* Get base address of scuart register */
|
|
SC_T *scuart_base = ((nu_scuart_t)serial)->scuart_base;
|
|
|
|
/* Get interrupt event */
|
|
uint32_t u32IntSts = scuart_base->INTSTS;
|
|
|
|
/* Handle RX event */
|
|
if (u32IntSts & (SC_INTSTS_RDAIF_Msk | SC_INTSTS_RXTOIF_Msk))
|
|
{
|
|
rt_hw_serial_isr(&serial->dev, RT_SERIAL_EVENT_RX_IND);
|
|
|
|
// RDA is the only interrupt enabled in this driver, this status bit
|
|
// automatically cleared after Rx FIFO empty. So no need to clear interrupt
|
|
// status here.
|
|
scuart_base->INTSTS = SC_INTSTS_RXTOIF_Msk;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* Configure scuart port
|
|
*/
|
|
static rt_err_t nu_scuart_configure(struct rt_serial_device *serial,
|
|
struct serial_configure *cfg)
|
|
{
|
|
rt_err_t ret = RT_EOK;
|
|
uint32_t scuart_word_len = 0;
|
|
uint32_t scuart_stop_bit = 0;
|
|
uint32_t scuart_parity = 0;
|
|
|
|
/* Get base address of scuart register */
|
|
SC_T *scuart_base = ((nu_scuart_t)serial)->scuart_base;
|
|
|
|
/* Check baud rate */
|
|
RT_ASSERT(cfg->baud_rate != 0);
|
|
|
|
/* Check word len */
|
|
switch (cfg->data_bits)
|
|
{
|
|
case DATA_BITS_5:
|
|
scuart_word_len = SCUART_CHAR_LEN_5;
|
|
break;
|
|
|
|
case DATA_BITS_6:
|
|
scuart_word_len = SCUART_CHAR_LEN_6;
|
|
break;
|
|
|
|
case DATA_BITS_7:
|
|
scuart_word_len = SCUART_CHAR_LEN_7;
|
|
break;
|
|
|
|
case DATA_BITS_8:
|
|
scuart_word_len = SCUART_CHAR_LEN_8;
|
|
break;
|
|
|
|
default:
|
|
LOG_E("Unsupported data length");
|
|
ret = RT_EINVAL;
|
|
goto exit_nu_scuart_configure;
|
|
}
|
|
|
|
/* Check stop bit */
|
|
switch (cfg->stop_bits)
|
|
{
|
|
case STOP_BITS_1:
|
|
scuart_stop_bit = SCUART_STOP_BIT_1;
|
|
break;
|
|
|
|
case STOP_BITS_2:
|
|
scuart_stop_bit = SCUART_STOP_BIT_2;
|
|
break;
|
|
|
|
default:
|
|
LOG_E("Unsupported stop bit");
|
|
ret = RT_EINVAL;
|
|
goto exit_nu_scuart_configure;
|
|
}
|
|
|
|
/* Check parity */
|
|
switch (cfg->parity)
|
|
{
|
|
case PARITY_NONE:
|
|
scuart_parity = SCUART_PARITY_NONE;
|
|
break;
|
|
|
|
case PARITY_ODD:
|
|
scuart_parity = SCUART_PARITY_ODD;
|
|
break;
|
|
|
|
case PARITY_EVEN:
|
|
scuart_parity = SCUART_PARITY_EVEN;
|
|
break;
|
|
|
|
default:
|
|
LOG_E("Unsupported parity");
|
|
ret = RT_EINVAL;
|
|
goto exit_nu_scuart_configure;
|
|
}
|
|
|
|
/* Reset this module */
|
|
SYS_ResetModule(((nu_scuart_t)serial)->scuart_rst);
|
|
|
|
/* Open SCUART and set SCUART baud rate */
|
|
SCUART_Open(scuart_base, cfg->baud_rate);
|
|
|
|
/* Set line configuration. */
|
|
SCUART_SetLineConfig(scuart_base, 0, scuart_word_len, scuart_parity,
|
|
scuart_stop_bit);
|
|
|
|
/* Enable NVIC interrupt. */
|
|
NVIC_EnableIRQ(((nu_scuart_t)serial)->scuart_irq_n);
|
|
|
|
exit_nu_scuart_configure:
|
|
|
|
if (ret != RT_EOK)
|
|
SCUART_Close(scuart_base);
|
|
|
|
return -(ret);
|
|
}
|
|
|
|
/**
|
|
* SCUART interrupt control
|
|
*/
|
|
static rt_err_t nu_scuart_control(struct rt_serial_device *serial, int cmd,
|
|
void *arg)
|
|
{
|
|
rt_err_t result = RT_EOK;
|
|
rt_uint32_t flag;
|
|
rt_ubase_t ctrl_arg = (rt_ubase_t)arg;
|
|
|
|
RT_ASSERT(serial != RT_NULL);
|
|
|
|
/* Get base address of scuart register */
|
|
SC_T *scuart_base = ((nu_scuart_t)serial)->scuart_base;
|
|
|
|
switch (cmd)
|
|
{
|
|
case RT_DEVICE_CTRL_CLR_INT:
|
|
if (ctrl_arg == RT_DEVICE_FLAG_INT_RX) /* Disable INT-RX */
|
|
{
|
|
flag = SC_INTEN_RDAIEN_Msk | SC_INTEN_RXTOIEN_Msk;
|
|
SCUART_DISABLE_INT(scuart_base, flag);
|
|
}
|
|
break;
|
|
|
|
case RT_DEVICE_CTRL_SET_INT:
|
|
if (ctrl_arg == RT_DEVICE_FLAG_INT_RX) /* Enable INT-RX */
|
|
{
|
|
flag = SC_INTEN_RDAIEN_Msk | SC_INTEN_RXTOIEN_Msk;
|
|
SCUART_ENABLE_INT(scuart_base, flag);
|
|
}
|
|
break;
|
|
|
|
case RT_DEVICE_CTRL_CLOSE:
|
|
/* Disable NVIC interrupt. */
|
|
NVIC_DisableIRQ(((nu_scuart_t)serial)->scuart_irq_n);
|
|
|
|
/* Reset this module */
|
|
SYS_ResetModule(((nu_scuart_t)serial)->scuart_rst);
|
|
|
|
/* Close SCUART port */
|
|
SCUART_Close(scuart_base);
|
|
|
|
break;
|
|
|
|
default:
|
|
result = -RT_EINVAL;
|
|
break;
|
|
}
|
|
return result;
|
|
}
|
|
|
|
/**
|
|
* SCUART put char
|
|
*/
|
|
static int nu_scuart_send(struct rt_serial_device *serial, char c)
|
|
{
|
|
RT_ASSERT(serial != RT_NULL);
|
|
|
|
/* Get base address of scuart register */
|
|
SC_T *scuart_base = ((nu_scuart_t)serial)->scuart_base;
|
|
|
|
/* Waiting if TX-FIFO is full. */
|
|
while (SCUART_IS_TX_FULL(scuart_base))
|
|
;
|
|
|
|
/* Put char into TX-FIFO */
|
|
SCUART_WRITE(scuart_base, c);
|
|
|
|
return 1;
|
|
}
|
|
|
|
/**
|
|
* SCUART get char
|
|
*/
|
|
static int nu_scuart_receive(struct rt_serial_device *serial)
|
|
{
|
|
RT_ASSERT(serial != RT_NULL);
|
|
|
|
/* Get base address of scuart register */
|
|
SC_T *scuart_base = ((nu_scuart_t)serial)->scuart_base;
|
|
|
|
/* Return failure if RX-FIFO is empty. */
|
|
if (SCUART_GET_RX_EMPTY(scuart_base))
|
|
{
|
|
return -1;
|
|
}
|
|
|
|
/* Get char from RX-FIFO */
|
|
return SCUART_READ(scuart_base);
|
|
}
|
|
|
|
/**
|
|
* Hardware SCUART Initialization
|
|
*/
|
|
static int rt_hw_scuart_init(void)
|
|
{
|
|
int i;
|
|
rt_uint32_t flag;
|
|
rt_err_t ret = RT_EOK;
|
|
|
|
for (i = (SCUART_START + 1); i < SCUART_CNT; i++)
|
|
{
|
|
flag = RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX;
|
|
|
|
nu_scuart_arr[i].dev.ops = &nu_scuart_ops;
|
|
nu_scuart_arr[i].dev.config = nu_scuart_default_config;
|
|
|
|
ret = rt_hw_serial_register(&nu_scuart_arr[i].dev, nu_scuart_arr[i].name,
|
|
flag, NULL);
|
|
RT_ASSERT(ret == RT_EOK);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
INIT_DEVICE_EXPORT(rt_hw_scuart_init);
|
|
#endif //#if defined(BSP_USING_SCUART)
|