libs/rt-thread
libs
/
rt-thread
4
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
rt-thread/bsp/renesas/ra6m3-hmi-board/board/rtduino/arduino_pinout
History
kurisaw 345ce24e31 [bsp][renesas] RTduino configuration update 
sync update

some optimize

[bsp][driver] Updates the naming convention of the i2c configuration item
 		2024-01-18 11:57:51 +08:00
..
README.md [bsp][renesas] RTduino configuration update 2024-01-18 11:57:51 +08:00
README_zh.md [bsp][renesas] RTduino configuration update 2024-01-18 11:57:51 +08:00
SConscript [bsp][rtduino] 新增HMI-Board对RTduino支持、HMI-Board支持C++特性、修复一些驱动问题 (#8205) 2023-11-01 06:07:46 +08:00
pins_arduino.c [bsp][renesas] RTduino configuration update 2024-01-18 11:57:51 +08:00
pins_arduino.h [bsp][renesas] RTduino configuration update 2024-01-18 11:57:51 +08:00
ra6m3-hmi-board-pinout-figure.jpg [bsp][rtduino] 新增HMI-Board对RTduino支持、HMI-Board支持C++特性、修复一些驱动问题 (#8205) 2023-11-01 06:07:46 +08:00

README.md

ra6m3-hmi-board Arduino Ecosystem Compatibility Guide

English | 中文

1 RTduino - Arduino Ecosystem Compatibility Layer for RT-Thread

The ra6m3-hmi-board development board has been fully adapted for the RTduino software package, the Arduino Ecosystem compatibility layer for RT-Thread. Users can operate this BSP following Arduino programming conventions and leverage a vast array of libraries from the Arduino community, providing significant enhancement to the RT-Thread ecosystem. For more information, refer to the RTduino Software Package Documentation.

1.1 Activating Arduino Ecosystem Compatibility Layer for this BSP

Enter the menuconfig command under the Env tool, or select RT-Thread Settings in the RT-Thread Studio IDE:

Hardware Drivers Config --->
    Onboard Peripheral Drivers --->
        [*] Compatible with Arduino Ecosystem (RTduino)

2 Arduino Pin Configuration

For more information about pin layout, refer to pins_arduino.c and pins_arduino.h.

ra6m3-hmi-board-pinout-figure

Arduino Pin Number STM32 Pin Number 5V Tolerance Remarks
0 (D0) P206 Yes Serial4-RX, default handled by RT-Thread's UART device framework uart4
1 (D1) P205 Yes Serial4-TX, default handled by RT-Thread's UART device framework uart4
2 (D2) P008 Yes
3 (D3) P506 Yes
4 (D4) P603 Yes
5 (D5) P604 Yes PWM8-CH0, default handled by RT-Thread's PWM device framework pwm8 channel 0
6 (D6) P605 Yes PWM8-CH0, default handled by RT-Thread's PWM device framework pwm8 channel 0
7 (D7) P208 Yes
8 (D8) P207 Yes
9 (D9) P009 Yes
10 (D10) P712 Yes PWM2-CH0, default handled by RT-Thread's PWM device framework pwm2 channel 0
11 (D11) P512 Yes PWM0-CH0, default handled by RT-Thread's PWM device framework pwm0 channel 0
12 (D12) P511 Yes
13 (D13) P204 Yes
14 (D14) P203 Yes
15 (D15) P202 Yes
16 (A0) P000 Yes ADC1-CH0-EXTVOL (External Voltage), default handled by RT-Thread's ADC device framework adc0 channel 0
17 (A1) P001 Yes ADC1-CH1-EXTVOL (External Voltage), default handled by RT-Thread's ADC device framework adc0 channel 1
18 (A2) P002 Yes ADC1-CH2-EXTVOL (External Voltage), default handled by RT-Thread's ADC device framework adc0 channel 2
19 (A3) P003 Yes ADC1-CH7-EXTVOL (External Voltage), default handled by RT-Thread's ADC device framework adc0 channel 7
20 (A4) P508 Yes ADC1-CH19-EXTVOL (External Voltage), default handled by RT-Thread's ADC device framework adc0 channel 20
21 (A5) P014 Yes ADC1-CH5-EXTVOL (External Voltage), default handled by RT-Thread's ADC device framework adc0 channel 5

Note:

  1. RTduino currently does not support MDK; it is recommended to use the GNU GCC toolchain for compilation.
  2. The default PWM channel for Renesas is channel 0; for detailed driver information, refer to the bsp\renesas\libraries\HAL_Drivers\drv_pwm.c file.