255 lines
7.1 KiB
C
255 lines
7.1 KiB
C
/*
|
|
* Copyright (c) 2006-2021, RT-Thread Development Team
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*
|
|
* Change Logs:
|
|
* Date Author Notes
|
|
* 2021-08-05 mazhiyuan first version
|
|
*/
|
|
#include <hal_device.h>
|
|
#include <rtdevice.h>
|
|
#include "drv_uart.h"
|
|
#include <hal_gpio.h>
|
|
#include <hal_uart.h>
|
|
#include <hal_rcc.h>
|
|
#include <hal_misc.h>
|
|
|
|
/* UART1 */
|
|
#define UART1_GPIO_TX GPIO_Pin_9
|
|
#define UART1_GPIO_TX_SOURCE GPIO_PinSource9
|
|
#define UART1_GPIO_RX GPIO_Pin_10
|
|
#define UART1_GPIO_RX_SOURCE GPIO_PinSource10
|
|
#define UART1_GPIO_AF GPIO_AF_1
|
|
#define UART1_GPIO GPIOA
|
|
|
|
/* UART2 */
|
|
#define UART2_GPIO_TX GPIO_Pin_2
|
|
#define UART2_GPIO_TX_SOURCE GPIO_PinSource2
|
|
#define UART2_GPIO_RX GPIO_Pin_3
|
|
#define UART2_GPIO_RX_SOURCE GPIO_PinSource3
|
|
#define UART2_GPIO_AF GPIO_AF_1
|
|
#define UART2_GPIO GPIOA
|
|
|
|
/* uart driver */
|
|
struct mm32_uart
|
|
{
|
|
UART_TypeDef *uart;
|
|
IRQn_Type irq;
|
|
};
|
|
|
|
static rt_err_t mm32_uart_configure(struct rt_serial_device *serial, struct serial_configure *cfg)
|
|
{
|
|
struct mm32_uart *uart;
|
|
UART_InitTypeDef UART_InitStructure;
|
|
RT_ASSERT(serial != RT_NULL);
|
|
RT_ASSERT(cfg != RT_NULL);
|
|
uart = (struct mm32_uart *)serial->parent.user_data;
|
|
UART_InitStructure.UART_BaudRate = cfg->baud_rate;
|
|
if (cfg->data_bits == DATA_BITS_8)
|
|
UART_InitStructure.UART_WordLength = UART_WordLength_8b;
|
|
if (cfg->stop_bits == STOP_BITS_1)
|
|
UART_InitStructure.UART_StopBits = UART_StopBits_1;
|
|
else if (cfg->stop_bits == STOP_BITS_2)
|
|
UART_InitStructure.UART_StopBits = UART_StopBits_2;
|
|
UART_InitStructure.UART_Parity = UART_Parity_No;
|
|
UART_InitStructure.UART_HardwareFlowControl = UART_HardwareFlowControl_None;
|
|
UART_InitStructure.UART_Mode = UART_Mode_Rx | UART_Mode_Tx;
|
|
UART_Init(uart->uart, &UART_InitStructure);
|
|
/* Enable UART */
|
|
UART_Cmd(uart->uart, ENABLE);
|
|
|
|
return RT_EOK;
|
|
}
|
|
|
|
static rt_err_t mm32_uart_control(struct rt_serial_device *serial, int cmd, void *arg)
|
|
{
|
|
struct mm32_uart *uart;
|
|
RT_ASSERT(serial != RT_NULL);
|
|
uart = (struct mm32_uart *)serial->parent.user_data;
|
|
switch (cmd)
|
|
{
|
|
case RT_DEVICE_CTRL_CLR_INT:
|
|
/* disable rx irq */
|
|
NVIC_DisableIRQ(uart->irq);
|
|
UART_ITConfig(uart->uart, UART_IT_RXIEN, DISABLE);
|
|
break;
|
|
case RT_DEVICE_CTRL_SET_INT:
|
|
/* enable rx irq */
|
|
NVIC_EnableIRQ(uart->irq);
|
|
/* enable interrupt */
|
|
UART_ITConfig(uart->uart, UART_IT_RXIEN, ENABLE);
|
|
break;
|
|
}
|
|
return RT_EOK;
|
|
}
|
|
|
|
static int mm32_uart_putc(struct rt_serial_device *serial, char c)
|
|
{
|
|
struct mm32_uart *uart;
|
|
RT_ASSERT(serial != RT_NULL);
|
|
uart = (struct mm32_uart *)serial->parent.user_data;
|
|
while ((uart->uart->CSR & UART_CSR_TXC) == 0)
|
|
;
|
|
uart->uart->TDR = c;
|
|
return 1;
|
|
}
|
|
|
|
static int mm32_uart_getc(struct rt_serial_device *serial)
|
|
{
|
|
int ch;
|
|
struct mm32_uart *uart;
|
|
RT_ASSERT(serial != RT_NULL);
|
|
uart = (struct mm32_uart *)serial->parent.user_data;
|
|
ch = -1;
|
|
if (uart->uart->CSR & UART_FLAG_RXAVL)
|
|
{
|
|
ch = uart->uart->RDR & 0xff;
|
|
}
|
|
return ch;
|
|
}
|
|
|
|
static const struct rt_uart_ops mm32_uart_ops =
|
|
{
|
|
mm32_uart_configure,
|
|
mm32_uart_control,
|
|
mm32_uart_putc,
|
|
mm32_uart_getc,
|
|
};
|
|
|
|
#if defined(BSP_USING_UART1)
|
|
/* UART1 device driver structure */
|
|
static struct mm32_uart uart1;
|
|
struct rt_serial_device serial1;
|
|
void UART1_IRQHandler(void)
|
|
{
|
|
struct mm32_uart *uart;
|
|
uart = &uart1;
|
|
/* enter interrupt */
|
|
rt_interrupt_enter();
|
|
if (UART_GetITStatus(uart->uart, UART_IT_RXIEN) != RESET)
|
|
{
|
|
UART_ClearITPendingBit(uart->uart, UART_IT_RXIEN);
|
|
rt_hw_serial_isr(&serial1, RT_SERIAL_EVENT_RX_IND);
|
|
}
|
|
if (UART_GetITStatus(uart->uart, UART_IT_TXIEN) != RESET)
|
|
{
|
|
/* clear interrupt */
|
|
UART_ClearITPendingBit(uart->uart, UART_IT_TXIEN);
|
|
}
|
|
/* leave interrupt */
|
|
rt_interrupt_leave();
|
|
}
|
|
#endif /* BSP_USING_UART1 */
|
|
|
|
#if defined(BSP_USING_UART2)
|
|
/* UART2 device driver structure */
|
|
static struct mm32_uart uart2;
|
|
struct rt_serial_device serial2;
|
|
void UART2_IRQHandler(void)
|
|
{
|
|
struct mm32_uart *uart;
|
|
uart = &uart2;
|
|
/* enter interrupt */
|
|
rt_interrupt_enter();
|
|
if (UART_GetITStatus(uart->uart, UART_IT_RXIEN) != RESET)
|
|
{
|
|
UART_ClearITPendingBit(uart->uart, UART_IT_RXIEN);
|
|
rt_hw_serial_isr(&serial2, RT_SERIAL_EVENT_RX_IND);
|
|
}
|
|
if (UART_GetITStatus(uart->uart, UART_IT_TXIEN) != RESET)
|
|
{
|
|
/* clear interrupt */
|
|
UART_ClearITPendingBit(uart->uart, UART_IT_TXIEN);
|
|
}
|
|
/* leave interrupt */
|
|
rt_interrupt_leave();
|
|
}
|
|
#endif /* BSP_USING_UART2 */
|
|
|
|
#ifdef BSP_USING_UART1
|
|
static void UART1PINconfigStepA(void)
|
|
{
|
|
/* Enable UART clock */
|
|
RCC_APB2PeriphClockCmd(RCC_APB2Periph_UART1, ENABLE);
|
|
RCC_AHBPeriphClockCmd(RCC_AHBPeriph_GPIOA, ENABLE);
|
|
}
|
|
|
|
static void UART1PINconfigStepB(void)
|
|
{
|
|
|
|
GPIO_InitTypeDef GPIO_InitStructure;
|
|
/* Configure USART Rx/tx PIN */
|
|
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9;
|
|
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
|
|
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
|
|
GPIO_Init(GPIOA, &GPIO_InitStructure);
|
|
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;
|
|
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU;
|
|
GPIO_Init(GPIOA, &GPIO_InitStructure);
|
|
GPIO_PinAFConfig(GPIOA, 9, GPIO_AF_7);
|
|
GPIO_PinAFConfig(GPIOA, 10, GPIO_AF_7);
|
|
}
|
|
#endif
|
|
|
|
#ifdef BSP_USING_UART2
|
|
static void UART2PINconfigStepA(void)
|
|
{
|
|
/* Enable UART clock */
|
|
RCC_APB1PeriphClockCmd(RCC_APB1Periph_UART2, ENABLE);
|
|
RCC_AHB2PeriphClockCmd(RCC_AHBPeriph_GPIOA, ENABLE);
|
|
}
|
|
|
|
static void UART2PINconfigStepB(void)
|
|
{
|
|
GPIO_InitTypeDef GPIO_InitStructure;
|
|
/* Configure USART Rx/tx PIN */
|
|
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2;
|
|
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
|
|
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
|
|
GPIO_Init(GPIOA, &GPIO_InitStructure);
|
|
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_3;
|
|
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
|
|
GPIO_Init(GPIOA, &GPIO_InitStructure);
|
|
GPIO_PinAFConfig(GPIOA, 2, GPIO_AF_7);
|
|
GPIO_PinAFConfig(GPIOA, 3, GPIO_AF_7);
|
|
}
|
|
#endif
|
|
|
|
int rt_hw_uart_init(void)
|
|
{
|
|
struct mm32_uart *uart;
|
|
struct serial_configure config = RT_SERIAL_CONFIG_DEFAULT;
|
|
#ifdef BSP_USING_UART1
|
|
UART1PINconfigStepA();
|
|
uart = &uart1;
|
|
uart->uart = UART1;
|
|
uart->irq = UART1_IRQn;
|
|
config.baud_rate = BAUD_RATE_115200;
|
|
serial1.ops = &mm32_uart_ops;
|
|
serial1.config = config;
|
|
/* register UART1 device */
|
|
rt_hw_serial_register(&serial1, "uart1",
|
|
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
|
|
uart);
|
|
UART1PINconfigStepB();
|
|
#endif /* BSP_USING_UART1 */
|
|
|
|
#ifdef BSP_USING_UART2
|
|
UART2PINconfigStepA();
|
|
uart = &uart2;
|
|
uart->uart = UART2;
|
|
uart->irq = UART2_IRQn;
|
|
config.baud_rate = BAUD_RATE_115200;
|
|
serial2.ops = &mm32_uart_ops;
|
|
serial2.config = config;
|
|
/* register UART2 device */
|
|
rt_hw_serial_register(&serial2, "uart2",
|
|
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
|
|
uart);
|
|
UART2PINconfigStepB();
|
|
#endif /* BSP_USING_UART2 */
|
|
return 0;
|
|
}
|
|
INIT_BOARD_EXPORT(rt_hw_uart_init);
|