rt-thread/bsp/mm32f327x/Libraries/MM32F327x/HAL_Lib/Src/hal_spi.c

////////////////////////////////////////////////////////////////////////////////
/// @file     hal_spi.c
/// @author   AE TEAM
/// @brief    THIS FILE PROVIDES ALL THE SPI FIRMWARE FUNCTIONS.
////////////////////////////////////////////////////////////////////////////////
/// @attention
///
/// THE EXISTING FIRMWARE IS ONLY FOR REFERENCE, WHICH IS DESIGNED TO PROVIDE
/// CUSTOMERS WITH CODING INFORMATION ABOUT THEIR PRODUCTS SO THEY CAN SAVE
/// TIME. THEREFORE, MINDMOTION SHALL NOT BE LIABLE FOR ANY DIRECT, INDIRECT OR
/// CONSEQUENTIAL DAMAGES ABOUT ANY CLAIMS ARISING OUT OF THE CONTENT OF SUCH
/// HARDWARE AND/OR THE USE OF THE CODING INFORMATION CONTAINED HEREIN IN
/// CONNECTION WITH PRODUCTS MADE BY CUSTOMERS.
///
/// <H2><CENTER>&COPY; COPYRIGHT MINDMOTION </CENTER></H2>
////////////////////////////////////////////////////////////////////////////////

// Define to prevent recursive inclusion
#define _HAL_SPI_C_
#include <math.h>
// Files includes
#include "hal_spi.h"
#include "hal_rcc.h"

////////////////////////////////////////////////////////////////////////////////
/// @addtogroup MM32_Hardware_Abstract_Layer
/// @{

////////////////////////////////////////////////////////////////////////////////
/// @addtogroup SPI_HAL
/// @{

////////////////////////////////////////////////////////////////////////////////
///@addtogroup SPI_Exported_Functions
///@{

////////////////////////////////////////////////////////////////////////////////
/// @brief  Deinitializes the spi peripheral registers to their
///         default reset values.
/// @param  spi: Select the SPI peripheral.
///         This parameter can be one of the following values:
///         SPI1, SPI2.
/// @retval None.
////////////////////////////////////////////////////////////////////////////////
void SPI_DeInit(SPI_TypeDef* spi)
{
    switch (*(vu32*)&spi) {
        case (u32)SPI2:  // SPI2_BASE:
            RCC_APB1PeriphResetCmd(RCC_APB1ENR_SPI2, ENABLE);
            RCC_APB1PeriphResetCmd(RCC_APB1ENR_SPI2, DISABLE);
            break;
        case (u32)SPI3:  // SPI3_BASE:
            RCC_APB1PeriphResetCmd(RCC_APB1ENR_SPI3, ENABLE);
            RCC_APB1PeriphResetCmd(RCC_APB1ENR_SPI3, DISABLE);
            break;
        case (u32)SPI1:  // SPI1_BASE:
            RCC_APB2PeriphResetCmd(RCC_APB2ENR_SPI1, ENABLE);
            RCC_APB2PeriphResetCmd(RCC_APB2ENR_SPI1, DISABLE);
            break;
        default:
            break;
    }
}

////////////////////////////////////////////////////////////////////////////////
/// @brief  Initializes the spi peripheral according to the specified
///         parameters in the init_struct .
/// @param  spi: Select the SPI peripheral.
///         This parameter can be one of the following values:
///         SPI1, SPI2.
/// @param  init_struct: pointer to a SPI_InitTypeDef structure
///         that contains the configuration information for the
///         specified SPI peripheral.
/// @retval None.
////////////////////////////////////////////////////////////////////////////////
void SPI_Init(SPI_TypeDef* spi, SPI_InitTypeDef* init_struct)
{
    if (init_struct->SPI_DataSize == SPI_DataSize_32b) {
        SET_BIT(spi->GCR, SPI_GCR_DWSEL);
    }
    else {
        CLEAR_BIT(spi->GCR, SPI_GCR_DWSEL);
    }
    MODIFY_REG(spi->GCR, SPI_GCR_NSS, init_struct->SPI_NSS);
    MODIFY_REG(spi->GCR, SPI_GCR_MODE, init_struct->SPI_Mode);
    MODIFY_REG(spi->CCR, SPI_CCR_LSBFE, init_struct->SPI_FirstBit);
    MODIFY_REG(spi->CCR, SPI_CCR_CPOL, init_struct->SPI_CPOL);
    MODIFY_REG(spi->CCR, SPI_CCR_CPHA, init_struct->SPI_CPHA);

    SET_BIT(spi->CCR, SPI_CCR_SPILEN);

    MODIFY_REG(spi->BRR, BRR_Mask, init_struct->SPI_BaudRatePrescaler);

    if (init_struct->SPI_DataWidth >= 32) {
        MODIFY_REG(spi->ECR, ECR_Mask, 0);
    }
    else {
        MODIFY_REG(spi->ECR, ECR_Mask, init_struct->SPI_DataWidth);
    }
}

////////////////////////////////////////////////////////////////////////////////
/// @brief  Fills each init_struct member with its default value.
/// @param  init_struct: pointer to a SPI_InitTypeDef structure
///         which will be initialized.
/// @retval None.
////////////////////////////////////////////////////////////////////////////////
void SPI_StructInit(SPI_InitTypeDef* init_struct)
{
    init_struct->SPI_Mode              = SPI_Mode_Slave;
    init_struct->SPI_DataSize          = SPI_DataSize_8b;
    init_struct->SPI_DataWidth         = 8;
    init_struct->SPI_CPOL              = SPI_CPOL_Low;
    init_struct->SPI_CPHA              = SPI_CPHA_1Edge;
    init_struct->SPI_NSS               = SPI_NSS_Soft;
    init_struct->SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_2;
    init_struct->SPI_FirstBit          = SPI_FirstBit_MSB;
}

////////////////////////////////////////////////////////////////////////////////
/// @brief  Enables or disables the specified SPI peripheral.
/// @param  spi: Select the SPI peripheral.
///         This parameter can be one of the following values:
///         SPI1, SPI2.
/// @param  state: new state of the spi peripheral.
///         This parameter can be: ENABLE or DISABLE.
/// @retval None.
////////////////////////////////////////////////////////////////////////////////
void SPI_Cmd(SPI_TypeDef* spi, FunctionalState state)
{
    (state) ? SET_BIT(spi->GCR, SPI_GCR_SPIEN) : CLEAR_BIT(spi->GCR, SPI_GCR_SPIEN);
}

////////////////////////////////////////////////////////////////////////////////
/// @brief  Enables or disables the specified SPI interrupts.
/// @param  spi: Select the SPI peripheral.
///         This parameter can be one of the following values:SPI1, SPI2.
/// @param  interrupt: specifies the SPI interrupt sources to be
///         enabled or disabled.
///         This parameter can be one of the following values:
/// @arg    SPI_IT_TXEPT: Transmitter empty interrupt
/// @arg    SPI_IT_RXFULL: RX FIFO full interrupt
/// @arg    SPI_IT_RXMATCH: Receive data match the RXDNR number interrupt
/// @arg    SPI_IT_RXOERR: Receive overrun error interrupt
/// @arg    SPI_IT_UNDERRUN: underrun interrupt
/// @arg    SPI_IT_RX: Receive data available interrupt
/// @arg    SPI_IT_TX: Transmit FIFO available interrupt
/// @param  state: new state of the specified spi interrupts.
///         This parameter can be: ENABLE or DISABLE.
/// @retval None.
////////////////////////////////////////////////////////////////////////////////
void SPI_ITConfig(SPI_TypeDef* spi, u8 interrupt, FunctionalState state)
{
    if (state) {
        SET_BIT(spi->GCR, (u32)SPI_GCR_IEN);
        SET_BIT(spi->IER, (u32)interrupt);
    }
    else {
        CLEAR_BIT(spi->IER, interrupt);
        CLEAR_BIT(spi->GCR, SPI_GCR_IEN);
    }
}
////////////////////////////////////////////////////////////////////////////////
/// @brief  Enables or disables the SPI DMA interface.
/// @param  spi: Select the SPI peripheral.
///         This parameter can be one of the following values:
///         SPI1, SPI2.
/// @param  state: new state of the DMA Request sources.
///         This parameter can be: ENABLE or DISABLE.
/// @retval None.
////////////////////////////////////////////////////////////////////////////////
void SPI_DMACmd(SPI_TypeDef* spi, FunctionalState state)
{
    (state) ? SET_BIT(spi->GCR, SPI_GCR_DMAEN) : CLEAR_BIT(spi->GCR, SPI_GCR_DMAEN);
}
////////////////////////////////////////////////////////////////////////////////
/// @brief  configure tn Fifo trigger level bit.
/// @param  spi: Select the SPI peripheral.
///         This parameter can be one of the following values:
///         SPI1, SPI2.
/// @param  fifo_trigger_value: specifies the Fifo trigger level
///         This parameter can be any combination of the following values:
///         SPI_TXTLF : SPI TX FIFO Trigger value set
///         SPI_RXTLF : SPI RX FIFO Trigger value set
/// @param  state: new state of the selected SPI transfer request.
///         This parameter can be: ENABLE or DISABLE.
/// @retval None.
////////////////////////////////////////////////////////////////////////////////
void SPI_FifoTrigger(SPI_TypeDef* spi, SPI_TLF_TypeDef fifo_trigger_value, FunctionalState state)
{
    (state) ? SET_BIT(spi->GCR, (u32)fifo_trigger_value) : CLEAR_BIT(spi->GCR, (u32)fifo_trigger_value);
}

////////////////////////////////////////////////////////////////////////////////
/// @brief  Transmits a Data through the spi peripheral.
/// @param  spi: Select the SPI peripheral.
///         This parameter can be one of the following values:
///         SPI1, SPI2.
/// @param  data : Data to be transmitted.
/// @retval None.
////////////////////////////////////////////////////////////////////////////////
void SPI_SendData(SPI_TypeDef* spi, u32 data)
{
    u16 templen;
    __asm volatile("cpsid i");

    WRITE_REG(spi->TDR, data);

    templen = READ_REG(spi->ECR);
    if(templen  == 0)
        templen = 32;
    if (templen > 8)
        WRITE_REG(spi->TDR, data >> 8);
    if (templen > 16)
        WRITE_REG(spi->TDR, data >> 16);
    if (templen > 24)
        WRITE_REG(spi->TDR, data >> 24);
    __asm volatile("cpsie i");
}

////////////////////////////////////////////////////////////////////////////////
/// @brief  Returns the most recent received data by the spi peripheral.
/// @param  spi: Select the SPI peripheral.
///         This parameter can be one of the following values:
///         SPI1, SPI2.
/// @retval The value of the received data.
////////////////////////////////////////////////////////////////////////////////
u32 SPI_ReceiveData(SPI_TypeDef* spi)
{
    u32 temp;
    u8 templen;
    __asm volatile("cpsid i");

    temp = READ_REG(spi->RDR);

    templen = READ_REG(spi->ECR);
    if(templen  == 0)
        templen = 32;
    if (templen > 8)
        temp |= (u32)(READ_REG(spi->RDR) << 8);
    if (templen > 16)
        temp |= (u32)(READ_REG(spi->RDR) << 16);
    if (templen > 24)
        temp |= (u32)(READ_REG(spi->RDR) << 24);

    __asm volatile("cpsie i");

    return temp;
}

////////////////////////////////////////////////////////////////////////////////
/// @brief  Slave chip csn single by selected
/// @param  spi: Select the SPI peripheral.
///         This parameter can be one of the following values:
///         SPI1, SPI2.
/// @param  state: new state of the selected SPI CS pin
///         request.
///         This parameter can be: ENABLE or DISABLE.
/// @retval None.
////////////////////////////////////////////////////////////////////////////////
void SPI_CSInternalSelected(SPI_TypeDef* spi, FunctionalState state)
{
    (state) ? CLEAR_BIT(spi->NSSR, SPI_NSSR_NSS) : SET_BIT(spi->NSSR, SPI_NSSR_NSS);  // illogical
}

////////////////////////////////////////////////////////////////////////////////
/// @brief  Configures the NSS pin control mode for the selected SPI.
/// @param  spi: Select the SPI peripheral.
///         This parameter can be one of the following values:
///         SPI1, SPI2.
/// @param  nss: specifies the SPI NSS internal state.
///         This parameter can be one of the following values:
/// @arg    SPI_NSS_Soft: NSS pin control by software
/// @arg    SPI_NSS_Hard: NSS pin control by hardware
/// @retval None.
////////////////////////////////////////////////////////////////////////////////
void SPI_NSSInternalSoftwareConfig(SPI_TypeDef* spi, SPI_NSS_TypeDef nss)
{
    (nss != SPI_NSS_Soft) ? SET_BIT(spi->GCR, SPI_NSS_Hard) : CLEAR_BIT(spi->GCR, SPI_NSS_Hard);
}

////////////////////////////////////////////////////////////////////////////////
/// @brief  Configures the data size for the selected SPI.
/// @param  spi: Select the SPI peripheral.
///         This parameter can be one of the following values:
///         SPI1, SPI2.
/// @param  data_size: specifies the SPI data size.
///         This parameter can be one of the following values:
///         0 to 31, 0 = 32b, 1 = 1b, 2 = 2b
/// @arg    DataSize : 0 to 31
/// @retval None.
/// @retval None.
bool SPI_DataSizeConfig(SPI_TypeDef* spi, u8 data_size)
{
    if (data_size > 32)
        return false;
    data_size &= 0x1F;
    WRITE_REG(spi->ECR, data_size);
    return true;
}

//////////////////////////////////////////////////////////////////////////////////
void SPI_DataSizeTypeConfig(SPI_TypeDef* spi, SPI_DataSize_TypeDef SPI_DataSize)
{
    CLEAR_BIT(spi->GCR, (u32)SPI_DataSize_32b);
    SET_BIT(spi->GCR, (u32)SPI_DataSize);
}

////////////////////////////////////////////////////////////////////////////////
/// @brief  Selects the data transfer direction in bi-directional mode
///         for the specified SPI.
/// @param spi: Select the SPI peripheral.
///         This parameter can be one of the following values:
///         SPI1, SPI2.
/// @param direction: specifies the data transfer direction in
///         bi-directional mode.
///         This parameter can be one of the following values:
/// @arg    SPI_Direction_Tx: Selects Tx transmission direction
/// @arg    SPI_Direction_Rx: Selects Rx receive direction
/// @arg    SPI_Disable_Tx: Selects Rx receive direction
/// @arg    SPI_Disable_Rx: Selects Rx receive direction
/// @retval None.
////////////////////////////////////////////////////////////////////////////////
void SPI_BiDirectionalLineConfig(SPI_TypeDef* spi, SPI_Direction_TypeDef direction)
{
    switch (direction) {
        case SPI_Direction_Rx:
            SET_BIT(spi->GCR, SPI_GCR_RXEN);
            break;
        case SPI_Direction_Tx:
            SET_BIT(spi->GCR, SPI_GCR_TXEN);
            break;
        case SPI_Disable_Rx:
            CLEAR_BIT(spi->GCR, SPI_GCR_RXEN);
            break;
        case SPI_Disable_Tx:
            CLEAR_BIT(spi->GCR, SPI_GCR_TXEN);
            break;
        default:
            break;
    }
}

////////////////////////////////////////////////////////////////////////////////
/// @brief  Checks whether the specified SPI flag is set or not.
/// @param  spi: Select the SPI peripheral.
///         This parameter can be one of the following values:
///         SPI1, SPI2.
/// @param  flag: specifies the SPI flag to check.
///         This parameter can be one of the following values:
/// @arg    SPI_FLAG_RXAVL: Rx buffer has bytes flag
/// @arg    SPI_FLAG_TXEPT: Tx buffer and tx shifter empty flag
/// @arg    SPI_FLAG_TXFULL: Tx buffer full flag
/// @arg    SPI_FLAG_RXAVL_4BYTE: Receive available 4 byte data message flag.
/// @retval The new state of SPI_FLAG (SET or RESET).
////////////////////////////////////////////////////////////////////////////////
FlagStatus SPI_GetFlagStatus(SPI_TypeDef* spi, SPI_FLAG_TypeDef flag)
{
//    u8 number;
    return (spi->SR & flag) ? SET : RESET;
//  if (spi->ECR == 8 || spi->ECR == 0)
//      return (spi->SR & SPI_FLAG) ? SET : RESET;
//  else {
//      if ((spi->ECR > 0) && (spi->ECR <= 8))
//          number = 1;
//      else if ((spi->ECR) <= 16)
//          number = 2;
//      else if ((spi->ECR) <= 24)
//          number = 3;
//      else if (((spi->ECR) <= 31) || (spi->ECR == 0))
//          number = 4;
//      return (((spi->SR & 0xf00) >> 8) >= number) ? SET : RESET;
//  }
}

////////////////////////////////////////////////////////////////////////////////
/// @brief  Checks whether the specified SPI interrupt has occurred or not.
/// @param  spi: Select the SPI peripheral.
///         This parameter can be one of the following values:
///         SPI1, SPI2.
/// @param  interrupt: specifies the SPI interrupt source to check.
///         This parameter can be one of the following values:
/// @arg    SPI_IT_TX: Tx buffer empty interrupt
/// @arg    SPI_IT_RX: Rx buffer  interrupt
/// @arg    SPI_IT_UNDERRUN: under Error interrupt in slave mode
/// @arg    SPI_IT_RXOVER: RX OVER Error interrupt
/// @arg    SPI_IT_RXMATCH: spectials rx data numbers  interrupt
/// @arg    SPI_IT_RXFULL: Rx buffer full interrupt
/// @arg    SPI_IT_TXEPT: Tx buffer  and tx shifter empty interrupt
/// @retval The new state of SPI_IT (SET or RESET).
////////////////////////////////////////////////////////////////////////////////
ITStatus SPI_GetITStatus(SPI_TypeDef* spi, SPI_IT_TypeDef interrupt)
{
    return (spi->ISR & interrupt) ? SET : RESET;
}

////////////////////////////////////////////////////////////////////////////////
/// @brief  Clears the spi  interrupt pending bit.
/// @param  spi: Select the SPI peripheral.
///         This parameter can be one of the following values:
///         SPI1, SPI2.
/// @param  interrupt: specifies the SPI interrupt pending bit to clear.
/// @arg    SPI_IT_TX: Tx buffer empty interrupt
/// @arg    SPI_IT_RX: Rx buffer  interrupt
/// @arg    SPI_IT_UNDERRUN: under Error interrupt in slave mode
/// @arg    SPI_IT_RXOVER: RX OVER Error interrupt
/// @arg    SPI_IT_RXMATCH: spectials rx data numbers  interrupt
/// @arg    SPI_IT_RXFULL: Rx buffer full interrupt
/// @arg    SPI_IT_TXEPT: Tx buffer  and tx shifter empty interrupt
///         This function clears only ERR intetrrupt pending bit.
/// @retval None.
////////////////////////////////////////////////////////////////////////////////
void SPI_ClearITPendingBit(SPI_TypeDef* spi, SPI_IT_TypeDef interrupt)
{
    SET_BIT(spi->ICR, interrupt);
}

////////////////////////////////////////////////////////////////////////////////
/// @brief  SPI Hole a count Received bytes in next receive process.
/// @param  spi: Select the SPI peripheral.
///         This parameter can be one of the following values:
///         SPI1, SPI2.
/// @param  number: specifies the SPI receive Number.
///         This parament can be 1-65535.
///         This function can use only in SPI master single receive mode.
/// @retval None.
////////////////////////////////////////////////////////////////////////////////
void SPI_RxBytes(SPI_TypeDef* spi, u16 number)
{
    WRITE_REG(spi->RDNR, number);
}

////////////////////////////////////////////////////////////////////////////////
/// @brief  slave mode tx data transmit phase adjust set.
/// @param  spi: Select the SPI peripheral.
///         This parameter can be one of the following values:
///         SPI1, SPI2.
/// @param  adjust_value: slave mode tx data transmit phase adjust enum.
///         This parament can be :
///         SPI_SlaveAdjust_FAST:  fast speed use
///         SPI_SlaveAdjust_LOW:   low speed use
///         This function can use only in SPI master single receive mode.
/// @retval None.
////////////////////////////////////////////////////////////////////////////////
void SPI_SlaveAdjust(SPI_TypeDef* spi, SPI_SlaveAdjust_TypeDef adjust_value)
{
    (adjust_value) ? SET_BIT(spi->CCR, SPI_CCR_RXEDGE) : CLEAR_BIT(spi->CCR, SPI_CCR_RXEDGE);
}

////////////////////////////////////////////////////////////////////////////////
/// @brief  Enables or disables all SPI interrupts.
/// @param  spi: Select the SPI peripheral.
///         This parameter can be one of the following values:
///         SPI1, SPI2.
/// @param  state: new state of all spi interrupts.
///         This parameter can be: ENABLE or DISABLE.
/// @retval None.
////////////////////////////////////////////////////////////////////////////////
void exSPI_ITCmd(SPI_TypeDef* spi, FunctionalState state)
{
    (state) ? SET_BIT(spi->IER, (u32)SPI_GCR_IEN) : CLEAR_BIT(spi->IER, (u32)SPI_GCR_IEN);
}

////////////////////////////////////////////////////////////////////////////////
/// @brief  Enables or disables the specified SPI interrupts.
/// @param  spi: Select the SPI peripheral.
///         This parameter can be one of the following values:
///         SPI1, SPI2.
/// @param  interrupt: specifies the SPI interrupt sources to be enabled or disabled.
///         This parameter can be one of the following values:
/// @arg    SPI_IT_TXEPT: Transmitter empty interrupt
/// @arg    SPI_IT_RXFULL: RX FIFO full interrupt
/// @arg    SPI_IT_RXMATCH: Receive data match the RXDNR number interrupt
/// @arg    SPI_IT_RXOERR: Receive overrun error interrupt
/// @arg    SPI_IT_UNDERRUN: underrun interrupt
/// @arg    SPI_IT_RX: Receive data available interrupt
/// @arg    SPI_IT_TX: Transmit FIFO available interrupt
/// @param  state: new state of the specified spi interrupts.
///         This parameter can be: ENABLE or DISABLE.
/// @retval None.
////////////////////////////////////////////////////////////////////////////////
void exSPI_ITConfig(SPI_TypeDef* spi, SPI_IT_TypeDef interrupt, FunctionalState state)
{
    (state) ? SET_BIT(spi->IER, (u32)interrupt) : CLEAR_BIT(spi->IER, (u32)interrupt);
}
////////////////////////////////////////////////////////////////////////////////
/// @brief  Enables or disables the SPI DMA request.
/// @param  spi: Select the SPI peripheral.
///         This parameter can be one of the following values:
///         SPI1, SPI2.
/// @param  state: new state of the DMA Request.
///         This parameter can be: ENABLE or DISABLE.
/// @retval None.
////////////////////////////////////////////////////////////////////////////////
void exSPI_DMACmd(SPI_TypeDef* spi, FunctionalState state)
{
    (state) ? SET_BIT(spi->GCR, SPI_GCR_DMAEN) : CLEAR_BIT(spi->GCR, SPI_GCR_DMAEN);
}
////////////////////////////////////////////////////////////////////////////////
/// @brief  Set or reset Slave chip csn signal output
/// @param  spi: Select the SPI peripheral.
///         This parameter can be one of the following values:
///         SPI1, SPI2.
/// @param  state: new state of Slave chip csn signal output.
///         This parameter can be: ENABLE or DISABLE.
/// @retval None.
////////////////////////////////////////////////////////////////////////////////
void exSPI_CSInternalSelected(SPI_TypeDef* spi, FunctionalState state)
{
    (state) ? CLEAR_BIT(spi->NSSR, SPI_NSSR_NSS) : SET_BIT(spi->NSSR, SPI_NSSR_NSS);  // illogical
}

////////////////////////////////////////////////////////////////////////////////
/// @brief  tx data and rx data phase adjust.
/// @param  spi: Select the SPI peripheral.
///         This parameter can be one of the following values:
///         SPI1, SPI2.
/// @param  adjust_value: choose adjust mode.
///         This parament can be :
///         SPI_DataEdgeAdjust_LOW,
///         SPI_DataEdgeAdjust_FAST
/// @retval None.
////////////////////////////////////////////////////////////////////////////////
void exSPI_DataEdgeAdjust(SPI_TypeDef* spi, SPI_DataEdgeAdjust_TypeDef adjust_value)
{
    // master mode
    if (spi->GCR & SPI_GCR_MODE) {
        adjust_value ? SET_BIT(spi->CCR, SPI_CCR_RXEDGE) : CLEAR_BIT(spi->CCR, SPI_CCR_RXEDGE);
    }
    // slave mode
    else {
        adjust_value ? SET_BIT(spi->CCR, SPI_CCR_TXEDGE) : CLEAR_BIT(spi->CCR, SPI_CCR_TXEDGE);
    }
}
////////////////////////////////////////////////////////////////////////////////
/// @brief  Set or reset i2s
/// @param  spi: Select the SPI peripheral.
///         This parameter can be one of the following values:
///         SPI1, SPI2, SPI3.
/// @param  state: new state of Slave chip csn signal output.
///         This parameter can be: ENABLE or DISABLE.
/// @retval None.
////////////////////////////////////////////////////////////////////////////////
void I2S_Cmd(SPI_TypeDef* spi, FunctionalState state)
{
    (state) ? SET_BIT(spi->CFGR, I2S_CFGR_SPI_I2S) : CLEAR_BIT(spi->CFGR, I2S_CFGR_SPI_I2S);
}
////////////////////////////////////////////////////////////////////////////////
/// @brief  i2s Config
/// @param  spi: Select the SPI peripheral.
///         This parameter can be one of the following values:
///         SPI1, SPI2, SPI3.
/// @param  state: new state of Slave chip csn signal output.
///         This parameter can be: ENABLE or DISABLE.
/// @retval None.
////////////////////////////////////////////////////////////////////////////////
void I2S_Init(SPI_TypeDef* spi, I2S_InitTypeDef* I2S_InitStruct)
{
    u32 i2sdiv = 2;
    u32 tmpreg = 0;
    u32 packetlength = 1;
    u32 result = 0, yushu = 0;
    u32 sourceclock = 0;
    RCC_ClocksTypeDef RCC_Clocks;

    if(I2S_InitStruct->I2S_AudioFreq == I2S_AudioFreq_Default) {
        i2sdiv = 2;
    }
    else {
        if(I2S_InitStruct->I2S_DataFormat == I2S_DataFormat_16b) {
            packetlength = 1;
        }
        else {
            packetlength = 2;
        }
        RCC_GetClocksFreq(&RCC_Clocks);

        if((SPI2 == spi) || (SPI3 == spi))  {
            sourceclock = RCC_Clocks.PCLK1_Frequency;
        }
        else {
            sourceclock = RCC_Clocks.PCLK2_Frequency;
        }
        if(I2S_InitStruct->I2S_MCLKOutput == I2S_MCLKOutput_Enable) {
            result = (sourceclock) / (256 * (I2S_InitStruct->I2S_AudioFreq));
            yushu = (sourceclock) % (256 * (I2S_InitStruct->I2S_AudioFreq));
            if(yushu > (128 * (I2S_InitStruct->I2S_AudioFreq))) {
                result = result + 1;
            }
            i2sdiv = result;
            if ((i2sdiv < 2) || (i2sdiv > 0x1FF)) {
                i2sdiv = 2;
            }
        }
        else {
            result = (sourceclock) / (16 * 2 * packetlength * (I2S_InitStruct->I2S_AudioFreq));
            yushu = (sourceclock) % (16 * 2 * packetlength * (I2S_InitStruct->I2S_AudioFreq));
            if(yushu > ((16 * packetlength * (I2S_InitStruct->I2S_AudioFreq)))) {
                result = result + 1;
            }
            if ((i2sdiv < 1) || (i2sdiv > 0x1FF)) {
                i2sdiv = 1;
            }
        }
    }
    if(I2S_CPOL_High  == I2S_InitStruct->I2S_CPOL) {
        spi->CCTL |= SPI_CCR_CPOL;
    }
    else {
        spi->CCTL &= ~SPI_CCR_CPOL;
    }

    spi->CFGR = 0x2 << I2S_CFGR_I2SDIV_Pos;

    if((I2S_InitStruct->I2S_Mode == I2S_Mode_MasterTx) || (I2S_InitStruct->I2S_Mode == I2S_Mode_MasterRx)) {
        spi->GCTL |= SPI_GCR_MODE;
    }
    else {
        spi->GCTL &= ~SPI_GCR_MODE;
    }
    if((I2S_InitStruct->I2S_Mode == I2S_Mode_MasterTx) || (I2S_InitStruct->I2S_Mode == I2S_Mode_SlaveTx)) {
        spi->GCTL |= SPI_GCR_TXEN;
        spi->GCTL &= ~SPI_GCR_RXEN;
    }
    else {
        spi->GCTL &= ~SPI_GCR_TXEN;
        spi->GCTL |= SPI_GCR_RXEN;
    }
//    tmpreg = spi->GCTL;
//    tmpreg &= ~(1 << 2);
//    tmpreg |= (u16)(I2S_InitStruct->I2S_Mode);
//    spi->GCTL = tmpreg;
//
    tmpreg = 0;
    tmpreg |= (i2sdiv << I2S_CFGR_I2SDIV_Pos) | \
              (I2S_InitStruct->I2S_MCLKOutput) | \
              (I2S_CFGR_SPI_I2S) | \
              (I2S_InitStruct->I2S_Standard) | \
              (I2S_InitStruct->I2S_DataFormat);
    spi->CFGR &= ~I2S_CFGR_I2SDIV;
    spi->CFGR |= tmpreg;

}
/// @}

/// @}

/// @}