216 lines
8.5 KiB
C
216 lines
8.5 KiB
C
////////////////////////////////////////////////////////////////////////////////
|
|
/// @file hal_pwr.c
|
|
/// @author AE TEAM
|
|
/// @brief THIS FILE PROVIDES ALL THE PWR FIRMWARE FUNCTIONS.
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @attention
|
|
///
|
|
/// THE EXISTING FIRMWARE IS ONLY FOR REFERENCE, WHICH IS DESIGNED TO PROVIDE
|
|
/// CUSTOMERS WITH CODING INFORMATION ABOUT THEIR PRODUCTS SO THEY CAN SAVE
|
|
/// TIME. THEREFORE, MINDMOTION SHALL NOT BE LIABLE FOR ANY DIRECT, INDIRECT OR
|
|
/// CONSEQUENTIAL DAMAGES ABOUT ANY CLAIMS ARISING OUT OF THE CONTENT OF SUCH
|
|
/// HARDWARE AND/OR THE USE OF THE CODING INFORMATION CONTAINED HEREIN IN
|
|
/// CONNECTION WITH PRODUCTS MADE BY CUSTOMERS.
|
|
///
|
|
/// <H2><CENTER>© COPYRIGHT MINDMOTION </CENTER></H2>
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
|
|
// Define to prevent recursive inclusion
|
|
#define __HAL_PWR_C_
|
|
|
|
// Files includes
|
|
#include "hal_pwr.h"
|
|
#include "hal_rcc.h"
|
|
#include "hal_syscfg.h"
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @addtogroup MM32_Hardware_Abstract_Layer
|
|
/// @{
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @addtogroup PWR_HAL
|
|
/// @{
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @addtogroup PWR_Exported_Functions
|
|
/// @{
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @brief Deinitializes the PWR peripheral registers to their default reset
|
|
/// values.
|
|
/// @param None.
|
|
/// @retval None.
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
void PWR_DeInit(void)
|
|
{
|
|
exRCC_APB1PeriphReset(RCC_APB1ENR_PWR);
|
|
}
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @brief Enables or disables access to the RTC and backup registers.
|
|
/// @param state: new state of the access to the RTC and backup
|
|
/// registers. This parameter can be: ENABLE or DISABLE.
|
|
/// @retval None.
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
void PWR_BackupAccessCmd(FunctionalState state)
|
|
{
|
|
(state) ? (RCC->BDCR |= RCC_BDCR_DBP) : (RCC->BDCR &= ~RCC_BDCR_DBP);
|
|
}
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @brief Enables or disables the Power Voltage Detector(PVD).
|
|
/// @param state: new state of the PVD.
|
|
/// This parameter can be: ENABLE or DISABLE.
|
|
/// @retval None.
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
void PWR_PVDCmd(FunctionalState state)
|
|
{
|
|
(state) ? (SYSCFG->PDETCSR |= SYSCFG_PDETCSR_PVDE) : (SYSCFG->PDETCSR &= ~SYSCFG_PDETCSR_PVDE);
|
|
}
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @brief Configures the voltage threshold detected by the Power Voltage
|
|
/// Detector(PVD).
|
|
/// @param pvd_level: specifies the PVD detection level
|
|
/// This parameter can be one of the following values:
|
|
/// @arg emPVD_LEVEL0 : PVD detection level set to 1.7V
|
|
/// @arg emPVD_LEVEL1 : PVD detection level set to 2.0V
|
|
/// @arg emPVD_LEVEL2 : PVD detection level set to 2.3V
|
|
/// @arg emPVD_LEVEL3 : PVD detection level set to 2.6V
|
|
/// @arg emPVD_LEVEL4 : PVD detection level set to 2.9V
|
|
/// @arg emPVD_LEVEL5 : PVD detection level set to 3.2V
|
|
/// @arg emPVD_LEVEL6 : PVD detection level set to 3.5V
|
|
/// @arg emPVD_LEVEL7 : PVD detection level set to 3.8V
|
|
/// @arg emPVD_LEVEL8 : PVD detection level set to 4.1V
|
|
/// @arg emPVD_LEVEL9 : PVD detection level set to 4.4V
|
|
/// @arg emPVD_LEVEL10: PVD detection level set to 4.7V
|
|
/// @retval None.
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
void PWR_PVDLevelConfig(emPVD_Level_Typedef pvd_level)
|
|
{
|
|
SYSCFG->PDETCSR = (SYSCFG->PDETCSR & (~SYSCFG_PDETCSR_PLS)) | pvd_level;
|
|
}
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @brief Enables or disables the WakeUp Pin functionality.
|
|
/// @param state: new state of the WakeUp Pin functionality.
|
|
/// This parameter can be: ENABLE or DISABLE.
|
|
/// @retval None.
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
void PWR_WakeUpPinCmd(FunctionalState state)
|
|
{
|
|
(state != DISABLE) ? (PWR->CR2 |= PWR_CR2_EWUP1) : (PWR->CSR &= ~PWR_CR2_EWUP1);
|
|
}
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @brief Enables or disables the WakeUp Pin functionality.
|
|
/// @param state: new state of the WakeUp Pin functionality.
|
|
/// This parameter can be: ENABLE or DISABLE.
|
|
/// @retval None.
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
void PWR_WakeUpPinXCmd(emWUP_Pin_Typedef pin, FunctionalState state)
|
|
{
|
|
(state != DISABLE) ? (PWR->CR2 |= (PWR_CR2_EWUP1 << pin)) : (PWR->CSR &= ~(PWR_CR2_EWUP1 << pin));
|
|
}
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @brief Enters STOP mode.
|
|
/// @param regulator: specifies the regulator state in STOP mode.
|
|
/// This parameter can be one of the following values:
|
|
/// @arg PWR_Regulator_ON: STOP mode with regulator ON
|
|
/// @arg PWR_Regulator_LowPower: STOP mode with regulator in low power mode.
|
|
/// @param stop_entry: specifies if STOP mode in entered with WFI or WFE
|
|
/// instruction.
|
|
/// This parameter can be one of the following values:
|
|
/// @arg PWR_STOPEntry_WFI: enter STOP mode with WFI instruction
|
|
/// @arg PWR_STOPEntry_WFE: enter STOP mode with WFE instruction
|
|
/// @retval None.
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
void PWR_EnterSTOPMode(emPWR_Reg_Stop_mode_Typedef regulator, emPWR_STOP_ModeEn_Typedef stop_entry)
|
|
{
|
|
|
|
MODIFY_REG(PWR->CR, PWR_CR_LDPS, regulator);
|
|
SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk;
|
|
|
|
if(stop_entry == PWR_STOPEntry_WFI) {
|
|
__WFI();
|
|
}
|
|
else {
|
|
__WFE();
|
|
}
|
|
}
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @brief Enters STANDBY mode.
|
|
/// @param None.
|
|
/// @retval None.
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
void PWR_EnterSTANDBYMode(void)
|
|
{
|
|
PWR->CR |= PWR_CR_PDDS;
|
|
PWR->SCR |= PWR_SCR_CWUF1 | PWR_SCR_CWUF2 | PWR_SCR_CWUF3 | PWR_SCR_CWUF4 | PWR_SCR_CWUF5 | PWR_SCR_CWUF6;
|
|
SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk;
|
|
|
|
#if defined(__CC_ARM)
|
|
__force_stores();
|
|
#endif
|
|
__WFI();
|
|
}
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @brief Checks whether the specified PWR flag is set or not.
|
|
/// @param flag: specifies the flag to check.
|
|
/// This parameter can be one of the following values:
|
|
/// @arg PWR_FLAG_WU: Wake Up flag
|
|
/// @arg PWR_FLAG_SB: StandBy flag
|
|
/// @arg PWR_FLAG_PVDO: PVD Output
|
|
/// @retval The new state of PWR_FLAG (SET or RESET).
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
FlagStatus PWR_GetPVDOFlagStatus(u32 flag)
|
|
{
|
|
return (FlagStatus)(SYSCFG->PDETCSR & flag);
|
|
}
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @brief Clears the PWR's pending flags.
|
|
/// @param flag: specifies the flag to clear.
|
|
/// This parameter can be one of the following values:
|
|
/// @arg PWR_FLAG_WU: Wake Up flag
|
|
/// @arg PWR_FLAG_SB: StandBy flag
|
|
/// @retval None.
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
void PWR_ClearPVDOFlag(u32 flag)
|
|
{
|
|
PWR->CR |= flag << 2;
|
|
}
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @brief Checks whether the specified PWR flag is set or not.
|
|
/// @param flag: specifies the flag to check.
|
|
/// This parameter can be one of the following values:
|
|
/// @arg PWR_FLAG_WU: Wake Up flag
|
|
/// @arg PWR_FLAG_SB: StandBy flag
|
|
/// @arg PWR_FLAG_PVDO: PVD Output
|
|
/// @retval The new state of PWR_FLAG (SET or RESET).
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
FlagStatus PWR_GetFlagStatus(u32 flag)
|
|
{
|
|
return (FlagStatus)(PWR->CSR & flag);
|
|
}
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @brief Clears the PWR's pending flags.
|
|
/// @param flag: specifies the flag to clear.
|
|
/// This parameter can be one of the following values:
|
|
/// @arg PWR_FLAG_WU: Wake Up flag
|
|
/// @arg PWR_FLAG_SB: StandBy flag
|
|
/// @retval None.
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
void PWR_ClearFlag(u32 flag)
|
|
{
|
|
PWR->CR |= flag << 2;
|
|
}
|
|
|
|
/// @}
|
|
|
|
/// @}
|
|
|
|
/// @}
|