2197 lines
106 KiB
C
2197 lines
106 KiB
C
/*
|
|
* Copyright (c) 2015, Freescale Semiconductor, Inc.
|
|
* Copyright 2016-2022 NXP
|
|
* All rights reserved.
|
|
*
|
|
* SPDX-License-Identifier: BSD-3-Clause
|
|
*/
|
|
#ifndef _FSL_FLEXCAN_H_
|
|
#define _FSL_FLEXCAN_H_
|
|
|
|
#include "fsl_common.h"
|
|
|
|
/*!
|
|
* @addtogroup flexcan_driver
|
|
* @{
|
|
*/
|
|
|
|
/******************************************************************************
|
|
* Definitions
|
|
*****************************************************************************/
|
|
|
|
/*! @name Driver version */
|
|
/*@{*/
|
|
/*! @brief FlexCAN driver version. */
|
|
#define FSL_FLEXCAN_DRIVER_VERSION (MAKE_VERSION(2, 8, 6))
|
|
/*@}*/
|
|
|
|
#if !(defined(FLEXCAN_WAIT_TIMEOUT) && FLEXCAN_WAIT_TIMEOUT)
|
|
/* Define to 1000 means keep waiting 1000 times until the flag is assert/deassert. */
|
|
#define FLEXCAN_WAIT_TIMEOUT (1000U)
|
|
#endif
|
|
|
|
/*! @brief FlexCAN frame length helper macro. */
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE) && FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE)
|
|
#define DLC_LENGTH_DECODE(dlc) (((dlc) <= 8U) ? (dlc) : (((dlc) <= 12U) ? (((dlc)-6U) * 4U) : (((dlc)-11U) * 16U)))
|
|
#endif
|
|
|
|
/*! @brief FlexCAN Frame ID helper macro. */
|
|
#define FLEXCAN_ID_STD(id) \
|
|
(((uint32_t)(((uint32_t)(id)) << CAN_ID_STD_SHIFT)) & CAN_ID_STD_MASK) /*!< Standard Frame ID helper macro. */
|
|
#define FLEXCAN_ID_EXT(id) \
|
|
(((uint32_t)(((uint32_t)(id)) << CAN_ID_EXT_SHIFT)) & \
|
|
(CAN_ID_EXT_MASK | CAN_ID_STD_MASK)) /*!< Extend Frame ID helper macro. */
|
|
|
|
/*! @brief FlexCAN Rx Message Buffer Mask helper macro. */
|
|
#define FLEXCAN_RX_MB_STD_MASK(id, rtr, ide) \
|
|
(((uint32_t)((uint32_t)(rtr) << 31) | (uint32_t)((uint32_t)(ide) << 30)) | \
|
|
FLEXCAN_ID_STD(id)) /*!< Standard Rx Message Buffer Mask helper macro. */
|
|
#define FLEXCAN_RX_MB_EXT_MASK(id, rtr, ide) \
|
|
(((uint32_t)((uint32_t)(rtr) << 31) | (uint32_t)((uint32_t)(ide) << 30)) | \
|
|
FLEXCAN_ID_EXT(id)) /*!< Extend Rx Message Buffer Mask helper macro. */
|
|
|
|
/*! @brief FlexCAN Legacy Rx FIFO Mask helper macro. */
|
|
#define FLEXCAN_RX_FIFO_STD_MASK_TYPE_A(id, rtr, ide) \
|
|
(((uint32_t)((uint32_t)(rtr) << 31) | (uint32_t)((uint32_t)(ide) << 30)) | \
|
|
(FLEXCAN_ID_STD(id) << 1)) /*!< Standard Rx FIFO Mask helper macro Type A helper macro. */
|
|
#define FLEXCAN_RX_FIFO_STD_MASK_TYPE_B_HIGH(id, rtr, ide) \
|
|
(((uint32_t)((uint32_t)(rtr) << 31) | (uint32_t)((uint32_t)(ide) << 30)) | \
|
|
(((uint32_t)(id)&0x7FF) << 19)) /*!< Standard Rx FIFO Mask helper macro Type B upper part helper macro. */
|
|
#define FLEXCAN_RX_FIFO_STD_MASK_TYPE_B_LOW(id, rtr, ide) \
|
|
(((uint32_t)((uint32_t)(rtr) << 15) | (uint32_t)((uint32_t)(ide) << 14)) | \
|
|
(((uint32_t)(id)&0x7FF) << 3)) /*!< Standard Rx FIFO Mask helper macro Type B lower part helper macro. */
|
|
#define FLEXCAN_RX_FIFO_STD_MASK_TYPE_C_HIGH(id) \
|
|
(((uint32_t)(id)&0x7F8) << 21) /*!< Standard Rx FIFO Mask helper macro Type C upper part helper macro. */
|
|
#define FLEXCAN_RX_FIFO_STD_MASK_TYPE_C_MID_HIGH(id) \
|
|
(((uint32_t)(id)&0x7F8) << 13) /*!< Standard Rx FIFO Mask helper macro Type C mid-upper part helper macro. */
|
|
#define FLEXCAN_RX_FIFO_STD_MASK_TYPE_C_MID_LOW(id) \
|
|
(((uint32_t)(id)&0x7F8) << 5) /*!< Standard Rx FIFO Mask helper macro Type C mid-lower part helper macro. */
|
|
#define FLEXCAN_RX_FIFO_STD_MASK_TYPE_C_LOW(id) \
|
|
(((uint32_t)(id)&0x7F8) >> 3) /*!< Standard Rx FIFO Mask helper macro Type C lower part helper macro. */
|
|
#define FLEXCAN_RX_FIFO_EXT_MASK_TYPE_A(id, rtr, ide) \
|
|
(((uint32_t)((uint32_t)(rtr) << 31) | (uint32_t)((uint32_t)(ide) << 30)) | \
|
|
(FLEXCAN_ID_EXT(id) << 1)) /*!< Extend Rx FIFO Mask helper macro Type A helper macro. */
|
|
#define FLEXCAN_RX_FIFO_EXT_MASK_TYPE_B_HIGH(id, rtr, ide) \
|
|
( \
|
|
((uint32_t)((uint32_t)(rtr) << 31) | (uint32_t)((uint32_t)(ide) << 30)) | \
|
|
((FLEXCAN_ID_EXT(id) & 0x1FFF8000) \
|
|
<< 1)) /*!< Extend Rx FIFO Mask helper macro Type B upper part helper macro. */
|
|
#define FLEXCAN_RX_FIFO_EXT_MASK_TYPE_B_LOW(id, rtr, ide) \
|
|
(((uint32_t)((uint32_t)(rtr) << 15) | (uint32_t)((uint32_t)(ide) << 14)) | \
|
|
((FLEXCAN_ID_EXT(id) & 0x1FFF8000) >> \
|
|
15)) /*!< Extend Rx FIFO Mask helper macro Type B lower part helper macro. */
|
|
#define FLEXCAN_RX_FIFO_EXT_MASK_TYPE_C_HIGH(id) \
|
|
((FLEXCAN_ID_EXT(id) & 0x1FE00000) << 3) /*!< Extend Rx FIFO Mask helper macro Type C upper part helper macro. */
|
|
#define FLEXCAN_RX_FIFO_EXT_MASK_TYPE_C_MID_HIGH(id) \
|
|
((FLEXCAN_ID_EXT(id) & 0x1FE00000) >> \
|
|
5) /*!< Extend Rx FIFO Mask helper macro Type C mid-upper part helper macro. */
|
|
#define FLEXCAN_RX_FIFO_EXT_MASK_TYPE_C_MID_LOW(id) \
|
|
((FLEXCAN_ID_EXT(id) & 0x1FE00000) >> \
|
|
13) /*!< Extend Rx FIFO Mask helper macro Type C mid-lower part helper macro. */
|
|
#define FLEXCAN_RX_FIFO_EXT_MASK_TYPE_C_LOW(id) \
|
|
((FLEXCAN_ID_EXT(id) & 0x1FE00000) >> 21) /*!< Extend Rx FIFO Mask helper macro Type C lower part helper macro. */
|
|
|
|
/*! @brief FlexCAN Rx FIFO Filter helper macro. */
|
|
#define FLEXCAN_RX_FIFO_STD_FILTER_TYPE_A(id, rtr, ide) \
|
|
FLEXCAN_RX_FIFO_STD_MASK_TYPE_A(id, rtr, ide) /*!< Standard Rx FIFO Filter helper macro Type A helper macro. */
|
|
#define FLEXCAN_RX_FIFO_STD_FILTER_TYPE_B_HIGH(id, rtr, ide) \
|
|
FLEXCAN_RX_FIFO_STD_MASK_TYPE_B_HIGH( \
|
|
id, rtr, ide) /*!< Standard Rx FIFO Filter helper macro Type B upper part helper macro. */
|
|
#define FLEXCAN_RX_FIFO_STD_FILTER_TYPE_B_LOW(id, rtr, ide) \
|
|
FLEXCAN_RX_FIFO_STD_MASK_TYPE_B_LOW( \
|
|
id, rtr, ide) /*!< Standard Rx FIFO Filter helper macro Type B lower part helper macro. */
|
|
#define FLEXCAN_RX_FIFO_STD_FILTER_TYPE_C_HIGH(id) \
|
|
FLEXCAN_RX_FIFO_STD_MASK_TYPE_C_HIGH( \
|
|
id) /*!< Standard Rx FIFO Filter helper macro Type C upper part helper macro. */
|
|
#define FLEXCAN_RX_FIFO_STD_FILTER_TYPE_C_MID_HIGH(id) \
|
|
FLEXCAN_RX_FIFO_STD_MASK_TYPE_C_MID_HIGH( \
|
|
id) /*!< Standard Rx FIFO Filter helper macro Type C mid-upper part helper macro. */
|
|
#define FLEXCAN_RX_FIFO_STD_FILTER_TYPE_C_MID_LOW(id) \
|
|
FLEXCAN_RX_FIFO_STD_MASK_TYPE_C_MID_LOW( \
|
|
id) /*!< Standard Rx FIFO Filter helper macro Type C mid-lower part helper macro. */
|
|
#define FLEXCAN_RX_FIFO_STD_FILTER_TYPE_C_LOW(id) \
|
|
FLEXCAN_RX_FIFO_STD_MASK_TYPE_C_LOW( \
|
|
id) /*!< Standard Rx FIFO Filter helper macro Type C lower part helper macro. */
|
|
#define FLEXCAN_RX_FIFO_EXT_FILTER_TYPE_A(id, rtr, ide) \
|
|
FLEXCAN_RX_FIFO_EXT_MASK_TYPE_A(id, rtr, ide) /*!< Extend Rx FIFO Filter helper macro Type A helper macro. */
|
|
#define FLEXCAN_RX_FIFO_EXT_FILTER_TYPE_B_HIGH(id, rtr, ide) \
|
|
FLEXCAN_RX_FIFO_EXT_MASK_TYPE_B_HIGH( \
|
|
id, rtr, ide) /*!< Extend Rx FIFO Filter helper macro Type B upper part helper macro. */
|
|
#define FLEXCAN_RX_FIFO_EXT_FILTER_TYPE_B_LOW(id, rtr, ide) \
|
|
FLEXCAN_RX_FIFO_EXT_MASK_TYPE_B_LOW( \
|
|
id, rtr, ide) /*!< Extend Rx FIFO Filter helper macro Type B lower part helper macro. */
|
|
#define FLEXCAN_RX_FIFO_EXT_FILTER_TYPE_C_HIGH(id) \
|
|
FLEXCAN_RX_FIFO_EXT_MASK_TYPE_C_HIGH( \
|
|
id) /*!< Extend Rx FIFO Filter helper macro Type C upper part helper macro. */
|
|
#define FLEXCAN_RX_FIFO_EXT_FILTER_TYPE_C_MID_HIGH(id) \
|
|
FLEXCAN_RX_FIFO_EXT_MASK_TYPE_C_MID_HIGH( \
|
|
id) /*!< Extend Rx FIFO Filter helper macro Type C mid-upper part helper macro. */
|
|
#define FLEXCAN_RX_FIFO_EXT_FILTER_TYPE_C_MID_LOW(id) \
|
|
FLEXCAN_RX_FIFO_EXT_MASK_TYPE_C_MID_LOW( \
|
|
id) /*!< Extend Rx FIFO Filter helper macro Type C mid-lower part helper macro. */
|
|
#define FLEXCAN_RX_FIFO_EXT_FILTER_TYPE_C_LOW(id) \
|
|
FLEXCAN_RX_FIFO_EXT_MASK_TYPE_C_LOW(id) /*!< Extend Rx FIFO Filter helper macro Type C lower part helper macro. */
|
|
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_ENHANCED_RX_FIFO) && FSL_FEATURE_FLEXCAN_HAS_ENHANCED_RX_FIFO)
|
|
/*! @brief FlexCAN Enhanced Rx FIFO Filter and Mask helper macro. */
|
|
#define ENHANCED_RX_FIFO_FSCH(x) (((uint32_t)(((uint32_t)(x)) << 30)) & 0xC0000000U)
|
|
#define RTR_STD_HIGH(x) (((uint32_t)(((uint32_t)(x)) << 27)) & 0x08000000U)
|
|
#define RTR_STD_LOW(x) (((uint32_t)(((uint32_t)(x)) << 11)) & 0x00000800U)
|
|
#define RTR_EXT(x) (((uint32_t)(((uint32_t)(x)) << 29)) & 0x40000000U)
|
|
#define ID_STD_LOW(id) (((uint32_t)id) & 0x7FFU)
|
|
#define ID_STD_HIGH(id) (((uint32_t)(((uint32_t)(id)) << 16)) & 0x07FF0000U)
|
|
#define ID_EXT(id) (((uint32_t)id) & 0x1FFFFFFFU)
|
|
|
|
/*! Standard ID filter element with filter + mask scheme. */
|
|
#define FLEXCAN_ENHANCED_RX_FIFO_STD_MASK_AND_FILTER(id, rtr, id_mask, rtr_mask) \
|
|
(ENHANCED_RX_FIFO_FSCH(0x0) | RTR_STD_HIGH(rtr) | ID_STD_HIGH(id) | RTR_STD_LOW(rtr_mask) | ID_STD_LOW(id_mask))
|
|
/*! Standard ID filter element with filter range. */
|
|
#define FLEXCAN_ENHANCED_RX_FIFO_STD_FILTER_WITH_RANGE(id_upper, rtr, id_lower, rtr_mask) \
|
|
(ENHANCED_RX_FIFO_FSCH(0x1) | RTR_STD_HIGH(rtr) | ID_STD_HIGH(id_upper) | RTR_STD_LOW(rtr_mask) | \
|
|
ID_STD_LOW(id_lower))
|
|
/*! Standard ID filter element with two filters without masks. */
|
|
#define FLEXCAN_ENHANCED_RX_FIFO_STD_TWO_FILTERS(id1, rtr1, id2, rtr2) \
|
|
(ENHANCED_RX_FIFO_FSCH(0x2) | RTR_STD_HIGH(rtr1) | ID_STD_HIGH(id1) | RTR_STD_LOW(rtr2) | ID_STD_LOW(id2))
|
|
/*! Extended ID filter element with filter + mask scheme low word. */
|
|
#define FLEXCAN_ENHANCED_RX_FIFO_EXT_MASK_AND_FILTER_LOW(id, rtr) \
|
|
(ENHANCED_RX_FIFO_FSCH(0x0) | RTR_EXT(rtr) | ID_EXT(id))
|
|
/*! Extended ID filter element with filter + mask scheme high word. */
|
|
#define FLEXCAN_ENHANCED_RX_FIFO_EXT_MASK_AND_FILTER_HIGH(id_mask, rtr_mask) \
|
|
(ENHANCED_RX_FIFO_FSCH(0x0) | RTR_EXT(rtr_mask) | ID_EXT(id_mask))
|
|
/*! Extended ID filter element with range scheme low word. */
|
|
#define FLEXCAN_ENHANCED_RX_FIFO_EXT_FILTER_WITH_RANGE_LOW(id_upper, rtr) \
|
|
(ENHANCED_RX_FIFO_FSCH(0x1) | RTR_EXT(rtr) | ID_EXT(id_upper))
|
|
/*! Extended ID filter element with range scheme high word. */
|
|
#define FLEXCAN_ENHANCED_RX_FIFO_EXT_FILTER_WITH_RANGE_HIGH(id_lower, rtr_mask) \
|
|
(ENHANCED_RX_FIFO_FSCH(0x1) | RTR_EXT(rtr_mask) | ID_EXT(id_lower))
|
|
/*! Extended ID filter element with two filters without masks low word. */
|
|
#define FLEXCAN_ENHANCED_RX_FIFO_EXT_TWO_FILTERS_LOW(id2, rtr2) \
|
|
(ENHANCED_RX_FIFO_FSCH(0x2) | RTR_EXT(rtr2) | ID_EXT(id2))
|
|
/*! Extended ID filter element with two filters without masks high word. */
|
|
#define FLEXCAN_ENHANCED_RX_FIFO_EXT_TWO_FILTERS_HIGH(id1, rtr1) \
|
|
(ENHANCED_RX_FIFO_FSCH(0x2) | RTR_EXT(rtr1) | ID_EXT(id1))
|
|
#endif
|
|
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_PN_MODE) && FSL_FEATURE_FLEXCAN_HAS_PN_MODE)
|
|
/*! @brief FlexCAN Pretended Networking ID Mask helper macro. */
|
|
#define FLEXCAN_PN_STD_MASK(id, rtr) \
|
|
((uint32_t)((uint32_t)(rtr) << CAN_FLT_ID1_FLT_RTR_SHIFT) | \
|
|
FLEXCAN_ID_STD(id)) /*!< Standard Rx Message Buffer Mask helper macro. */
|
|
#define FLEXCAN_PN_EXT_MASK(id, rtr) \
|
|
((uint32_t)CAN_FLT_ID1_FLT_IDE_MASK | (uint32_t)((uint32_t)(rtr) << CAN_FLT_ID1_FLT_RTR_SHIFT) | \
|
|
FLEXCAN_ID_EXT(id)) /*!< Extend Rx Message Buffer Mask helper macro. */
|
|
#endif
|
|
|
|
/*! @brief FlexCAN interrupt/status flag helper macro. */
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_PN_MODE) && FSL_FEATURE_FLEXCAN_HAS_PN_MODE)
|
|
#define FLEXCAN_PN_INT_MASK(x) (((uint64_t)(((uint64_t)(x)) << 32)) & 0x3000000000000U)
|
|
#define FLEXCAN_PN_INT_UNMASK(x) (((uint32_t)(((uint64_t)(x)) >> 32)) & 0x00030000U)
|
|
#define FLEXCAN_PN_STATUS_MASK(x) (((uint64_t)(((uint64_t)(x)) << 16)) & 0x300000000U)
|
|
#define FLEXCAN_PN_STATUS_UNMASK(x) (((uint32_t)(((uint64_t)(x)) >> 16)) & 0x00030000U)
|
|
#endif
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_ENHANCED_RX_FIFO) && FSL_FEATURE_FLEXCAN_HAS_ENHANCED_RX_FIFO)
|
|
#define FLEXCAN_EFIFO_INT_MASK(x) (((uint64_t)(((uint64_t)(x)) << 32)) & 0xF000000000000000U)
|
|
#define FLEXCAN_EFIFO_INT_UNMASK(x) (((uint32_t)(((uint64_t)(x)) >> 32)) & 0xF0000000U)
|
|
#define FLEXCAN_EFIFO_STATUS_MASK(x) (((uint64_t)(((uint64_t)(x)) << 32)) & 0xF003000000000000U)
|
|
#define FLEXCAN_EFIFO_STATUS_UNMASK(x) (((uint32_t)(((uint64_t)(x)) >> 32)) & 0xF0030000U)
|
|
#endif
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_MEMORY_ERROR_CONTROL) && FSL_FEATURE_FLEXCAN_HAS_MEMORY_ERROR_CONTROL)
|
|
#define FLEXCAN_MECR_INT_MASK(x) (((uint64_t)(((uint64_t)(x)) << 16)) & 0xD00000000U)
|
|
#define FLEXCAN_MECR_INT_UNMASK(x) (((uint32_t)(((uint64_t)(x)) >> 16)) & 0x000D0000U)
|
|
#define FLEXCAN_MECR_STATUS_MASK(x) (((uint64_t)(((uint64_t)(x)) << 34)) & 0x34003400000000U)
|
|
#define FLEXCAN_MECR_STATUS_UNMASK(x) (((uint32_t)(((uint64_t)(x)) >> 34)) & 0x000D000DU)
|
|
#endif
|
|
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE) && FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE)
|
|
#define FLEXCAN_ERROR_AND_STATUS_INIT_FLAG \
|
|
((uint32_t)kFLEXCAN_ErrorOverrunFlag | (uint32_t)kFLEXCAN_FDErrorIntFlag | (uint32_t)kFLEXCAN_BusoffDoneIntFlag | \
|
|
(uint32_t)kFLEXCAN_TxWarningIntFlag | (uint32_t)kFLEXCAN_RxWarningIntFlag | (uint32_t)kFLEXCAN_BusOffIntFlag | \
|
|
(uint32_t)kFLEXCAN_ErrorIntFlag | FLEXCAN_MEMORY_ERROR_INIT_FLAG)
|
|
#else
|
|
#define FLEXCAN_ERROR_AND_STATUS_INIT_FLAG \
|
|
((uint32_t)kFLEXCAN_TxWarningIntFlag | (uint32_t)kFLEXCAN_RxWarningIntFlag | (uint32_t)kFLEXCAN_BusOffIntFlag | \
|
|
(uint32_t)kFLEXCAN_ErrorIntFlag | FLEXCAN_MEMORY_ERROR_INIT_FLAG)
|
|
#endif
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_PN_MODE) && FSL_FEATURE_FLEXCAN_HAS_PN_MODE)
|
|
#define FLEXCAN_WAKE_UP_FLAG \
|
|
((uint32_t)kFLEXCAN_WakeUpIntFlag | (uint64_t)kFLEXCAN_PNMatchIntFlag | (uint64_t)kFLEXCAN_PNTimeoutIntFlag)
|
|
#else
|
|
#define FLEXCAN_WAKE_UP_FLAG ((uint32_t)kFLEXCAN_WakeUpIntFlag)
|
|
#endif
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_MEMORY_ERROR_CONTROL) && FSL_FEATURE_FLEXCAN_HAS_MEMORY_ERROR_CONTROL)
|
|
#define FLEXCAN_MEMORY_ERROR_INIT_FLAG ((uint64_t)kFLEXCAN_AllMemoryErrorFlag)
|
|
#else
|
|
#define FLEXCAN_MEMORY_ERROR_INIT_FLAG (0U)
|
|
#endif
|
|
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_ENHANCED_RX_FIFO) && FSL_FEATURE_FLEXCAN_HAS_ENHANCED_RX_FIFO)
|
|
#define FLEXCAN_MEMORY_ENHANCED_RX_FIFO_INIT_FLAG \
|
|
((uint64_t)kFLEXCAN_ERxFifoUnderflowIntFlag | (uint64_t)kFLEXCAN_ERxFifoOverflowIntFlag | \
|
|
(uint64_t)kFLEXCAN_ERxFifoWatermarkIntFlag | (uint64_t)kFLEXCAN_ERxFifoDataAvlIntFlag)
|
|
#define FLEXCAN_MEMORY_ENHANCED_RX_FIFO_INIT_MASK \
|
|
(CAN_ERFIER_ERFUFWIE_MASK | CAN_ERFIER_ERFOVFIE_MASK | CAN_ERFIER_ERFWMIIE_MASK | CAN_ERFIER_ERFDAIE_MASK)
|
|
#endif
|
|
|
|
/*! @brief FlexCAN Enhanced Rx FIFO base address helper macro. */
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_ENHANCED_RX_FIFO) && FSL_FEATURE_FLEXCAN_HAS_ENHANCED_RX_FIFO)
|
|
#define E_RX_FIFO(base) ((uint32_t)(base) + 0x2000U)
|
|
#endif
|
|
/*! @brief FlexCAN transfer status. */
|
|
enum
|
|
{
|
|
kStatus_FLEXCAN_TxBusy = MAKE_STATUS(kStatusGroup_FLEXCAN, 0), /*!< Tx Message Buffer is Busy. */
|
|
kStatus_FLEXCAN_TxIdle = MAKE_STATUS(kStatusGroup_FLEXCAN, 1), /*!< Tx Message Buffer is Idle. */
|
|
kStatus_FLEXCAN_TxSwitchToRx = MAKE_STATUS(
|
|
kStatusGroup_FLEXCAN, 2), /*!< Remote Message is send out and Message buffer changed to Receive one. */
|
|
kStatus_FLEXCAN_RxBusy = MAKE_STATUS(kStatusGroup_FLEXCAN, 3), /*!< Rx Message Buffer is Busy. */
|
|
kStatus_FLEXCAN_RxIdle = MAKE_STATUS(kStatusGroup_FLEXCAN, 4), /*!< Rx Message Buffer is Idle. */
|
|
kStatus_FLEXCAN_RxOverflow = MAKE_STATUS(kStatusGroup_FLEXCAN, 5), /*!< Rx Message Buffer is Overflowed. */
|
|
kStatus_FLEXCAN_RxFifoBusy = MAKE_STATUS(kStatusGroup_FLEXCAN, 6), /*!< Rx Message FIFO is Busy. */
|
|
kStatus_FLEXCAN_RxFifoIdle = MAKE_STATUS(kStatusGroup_FLEXCAN, 7), /*!< Rx Message FIFO is Idle. */
|
|
kStatus_FLEXCAN_RxFifoOverflow = MAKE_STATUS(kStatusGroup_FLEXCAN, 8), /*!< Rx Message FIFO is overflowed. */
|
|
kStatus_FLEXCAN_RxFifoWarning = MAKE_STATUS(kStatusGroup_FLEXCAN, 9), /*!< Rx Message FIFO is almost overflowed. */
|
|
kStatus_FLEXCAN_ErrorStatus = MAKE_STATUS(kStatusGroup_FLEXCAN, 10), /*!< FlexCAN Module Error and Status. */
|
|
kStatus_FLEXCAN_WakeUp = MAKE_STATUS(kStatusGroup_FLEXCAN, 11), /*!< FlexCAN is waken up from STOP mode. */
|
|
kStatus_FLEXCAN_UnHandled = MAKE_STATUS(kStatusGroup_FLEXCAN, 12), /*!< UnHadled Interrupt asserted. */
|
|
kStatus_FLEXCAN_RxRemote = MAKE_STATUS(kStatusGroup_FLEXCAN, 13), /*!< Rx Remote Message Received in Mail box. */
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_ENHANCED_RX_FIFO) && FSL_FEATURE_FLEXCAN_HAS_ENHANCED_RX_FIFO)
|
|
kStatus_FLEXCAN_RxFifoUnderflow =
|
|
MAKE_STATUS(kStatusGroup_FLEXCAN, 14), /*!< Enhanced Rx Message FIFO is underflow. */
|
|
#endif
|
|
};
|
|
|
|
/*! @brief FlexCAN frame format. */
|
|
typedef enum _flexcan_frame_format
|
|
{
|
|
kFLEXCAN_FrameFormatStandard = 0x0U, /*!< Standard frame format attribute. */
|
|
kFLEXCAN_FrameFormatExtend = 0x1U, /*!< Extend frame format attribute. */
|
|
} flexcan_frame_format_t;
|
|
|
|
/*! @brief FlexCAN frame type. */
|
|
typedef enum _flexcan_frame_type
|
|
{
|
|
kFLEXCAN_FrameTypeData = 0x0U, /*!< Data frame type attribute. */
|
|
kFLEXCAN_FrameTypeRemote = 0x1U, /*!< Remote frame type attribute. */
|
|
} flexcan_frame_type_t;
|
|
|
|
/*! @brief FlexCAN clock source.
|
|
* @deprecated Do not use the kFLEXCAN_ClkSrcOs. It has been superceded kFLEXCAN_ClkSrc0
|
|
* @deprecated Do not use the kFLEXCAN_ClkSrcPeri. It has been superceded kFLEXCAN_ClkSrc1
|
|
*/
|
|
typedef enum _flexcan_clock_source
|
|
{
|
|
kFLEXCAN_ClkSrcOsc = 0x0U, /*!< FlexCAN Protocol Engine clock from Oscillator. */
|
|
kFLEXCAN_ClkSrcPeri = 0x1U, /*!< FlexCAN Protocol Engine clock from Peripheral Clock. */
|
|
kFLEXCAN_ClkSrc0 = 0x0U, /*!< FlexCAN Protocol Engine clock selected by user as SRC == 0. */
|
|
kFLEXCAN_ClkSrc1 = 0x1U, /*!< FlexCAN Protocol Engine clock selected by user as SRC == 1. */
|
|
} flexcan_clock_source_t;
|
|
|
|
/*! @brief FlexCAN wake up source. */
|
|
typedef enum _flexcan_wake_up_source
|
|
{
|
|
kFLEXCAN_WakeupSrcUnfiltered = 0x0U, /*!< FlexCAN uses unfiltered Rx input to detect edge. */
|
|
kFLEXCAN_WakeupSrcFiltered = 0x1U, /*!< FlexCAN uses filtered Rx input to detect edge. */
|
|
} flexcan_wake_up_source_t;
|
|
|
|
/*! @brief FlexCAN Rx Fifo Filter type. */
|
|
typedef enum _flexcan_rx_fifo_filter_type
|
|
{
|
|
kFLEXCAN_RxFifoFilterTypeA = 0x0U, /*!< One full ID (standard and extended) per ID Filter element. */
|
|
kFLEXCAN_RxFifoFilterTypeB =
|
|
0x1U, /*!< Two full standard IDs or two partial 14-bit ID slices per ID Filter Table element. */
|
|
kFLEXCAN_RxFifoFilterTypeC =
|
|
0x2U, /*!< Four partial 8-bit Standard or extended ID slices per ID Filter Table element. */
|
|
kFLEXCAN_RxFifoFilterTypeD = 0x3U, /*!< All frames rejected. */
|
|
} flexcan_rx_fifo_filter_type_t;
|
|
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE) && FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE)
|
|
/*!
|
|
* @brief FlexCAN Message Buffer Payload size.
|
|
*/
|
|
typedef enum _flexcan_mb_size
|
|
{
|
|
kFLEXCAN_8BperMB = 0x0U, /*!< Selects 8 bytes per Message Buffer. */
|
|
kFLEXCAN_16BperMB = 0x1U, /*!< Selects 16 bytes per Message Buffer. */
|
|
kFLEXCAN_32BperMB = 0x2U, /*!< Selects 32 bytes per Message Buffer. */
|
|
kFLEXCAN_64BperMB = 0x3U, /*!< Selects 64 bytes per Message Buffer. */
|
|
} flexcan_mb_size_t;
|
|
|
|
/*!
|
|
* @brief FlexCAN CAN FD frame supporting data length (available DLC values).
|
|
*
|
|
* For Tx, when the Data size corresponding to DLC value stored in the MB selected for transmission is larger than the
|
|
* MB Payload size, FlexCAN adds the necessary number of bytes with constant 0xCC pattern to complete the expected DLC.
|
|
* For Rx, when the Data size corresponding to DLC value received from the CAN bus is larger than the MB Payload size,
|
|
* the high order bytes that do not fit the Payload size will lose.
|
|
*/
|
|
enum _flexcan_fd_frame_length
|
|
{
|
|
kFLEXCAN_0BperFrame = 0x0U, /*!< Frame contains 0 valid data bytes. */
|
|
kFLEXCAN_1BperFrame, /*!< Frame contains 1 valid data bytes. */
|
|
kFLEXCAN_2BperFrame, /*!< Frame contains 2 valid data bytes. */
|
|
kFLEXCAN_3BperFrame, /*!< Frame contains 3 valid data bytes. */
|
|
kFLEXCAN_4BperFrame, /*!< Frame contains 4 valid data bytes. */
|
|
kFLEXCAN_5BperFrame, /*!< Frame contains 5 valid data bytes. */
|
|
kFLEXCAN_6BperFrame, /*!< Frame contains 6 valid data bytes. */
|
|
kFLEXCAN_7BperFrame, /*!< Frame contains 7 valid data bytes. */
|
|
kFLEXCAN_8BperFrame, /*!< Frame contains 8 valid data bytes. */
|
|
kFLEXCAN_12BperFrame, /*!< Frame contains 12 valid data bytes. */
|
|
kFLEXCAN_16BperFrame, /*!< Frame contains 16 valid data bytes. */
|
|
kFLEXCAN_20BperFrame, /*!< Frame contains 20 valid data bytes. */
|
|
kFLEXCAN_24Bperrame, /*!< Frame contains 24 valid data bytes. */
|
|
kFLEXCAN_32BperFrame, /*!< Frame contains 32 valid data bytes. */
|
|
kFLEXCAN_48BperFrame, /*!< Frame contains 48 valid data bytes. */
|
|
kFLEXCAN_64BperFrame, /*!< Frame contains 64 valid data bytes. */
|
|
};
|
|
#endif
|
|
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_ENHANCED_RX_FIFO) && FSL_FEATURE_FLEXCAN_HAS_ENHANCED_RX_FIFO)
|
|
/*! @brief FlexCAN Enhanced Rx Fifo DMA transfer per read length enumerations. */
|
|
typedef enum _flexcan_efifo_dma_per_read_length
|
|
{
|
|
kFLEXCAN_1WordPerRead = 0x0U, /*!< Transfer 1 32-bit words (CS).*/
|
|
kFLEXCAN_2WordPerRead, /*!< Transfer 2 32-bit words (CS + ID).*/
|
|
kFLEXCAN_3WordPerRead, /*!< Transfer 3 32-bit words (CS + ID + 1~4 bytes data).*/
|
|
kFLEXCAN_4WordPerRead, /*!< Transfer 4 32-bit words (CS + ID + 5~8 bytes data).*/
|
|
kFLEXCAN_5WordPerRead, /*!< Transfer 5 32-bit words (CS + ID + 9~12 bytes data).*/
|
|
kFLEXCAN_6WordPerRead, /*!< Transfer 6 32-bit words (CS + ID + 13~16 bytes data).*/
|
|
kFLEXCAN_7WordPerRead, /*!< Transfer 7 32-bit words (CS + ID + 17~20 bytes data).*/
|
|
kFLEXCAN_8WordPerRead, /*!< Transfer 8 32-bit words (CS + ID + 21~24 bytes data).*/
|
|
kFLEXCAN_9WordPerRead, /*!< Transfer 9 32-bit words (CS + ID + 25~28 bytes data).*/
|
|
kFLEXCAN_10WordPerRead, /*!< Transfer 10 32-bit words (CS + ID + 29~32 bytes data).*/
|
|
kFLEXCAN_11WordPerRead, /*!< Transfer 11 32-bit words (CS + ID + 33~36 bytes data).*/
|
|
kFLEXCAN_12WordPerRead, /*!< Transfer 12 32-bit words (CS + ID + 37~40 bytes data).*/
|
|
kFLEXCAN_13WordPerRead, /*!< Transfer 13 32-bit words (CS + ID + 41~44 bytes data).*/
|
|
kFLEXCAN_14WordPerRead, /*!< Transfer 14 32-bit words (CS + ID + 45~48 bytes data).*/
|
|
kFLEXCAN_15WordPerRead, /*!< Transfer 15 32-bit words (CS + ID + 49~52 bytes data).*/
|
|
kFLEXCAN_16WordPerRead, /*!< Transfer 16 32-bit words (CS + ID + 53~56 bytes data).*/
|
|
kFLEXCAN_17WordPerRead, /*!< Transfer 17 32-bit words (CS + ID + 57~60 bytes data).*/
|
|
kFLEXCAN_18WordPerRead, /*!< Transfer 18 32-bit words (CS + ID + 61~64 bytes data).*/
|
|
kFLEXCAN_19WordPerRead /*!< Transfer 19 32-bit words (CS + ID + 64 bytes data + ID HIT).*/
|
|
} flexcan_efifo_dma_per_read_length_t;
|
|
#endif
|
|
|
|
/*!
|
|
* @brief FlexCAN Enhanced/Legacy Rx FIFO priority.
|
|
*
|
|
* The matching process starts from the Rx MB(or Enhanced/Legacy Rx FIFO) with higher priority.
|
|
* If no MB(or Enhanced/Legacy Rx FIFO filter) is satisfied, the matching process goes on with
|
|
* the Enhanced/Legacy Rx FIFO(or Rx MB) with lower priority.
|
|
*/
|
|
typedef enum _flexcan_rx_fifo_priority
|
|
{
|
|
kFLEXCAN_RxFifoPrioLow = 0x0U, /*!< Matching process start from Rx Message Buffer first. */
|
|
kFLEXCAN_RxFifoPrioHigh = 0x1U, /*!< Matching process start from Enhanced/Legacy Rx FIFO first. */
|
|
} flexcan_rx_fifo_priority_t;
|
|
|
|
/*!
|
|
* @brief FlexCAN interrupt enable enumerations.
|
|
*
|
|
* This provides constants for the FlexCAN interrupt enable enumerations for use in the FlexCAN functions.
|
|
* @note FlexCAN Message Buffers and Legacy Rx FIFO interrupts not included in.
|
|
*/
|
|
enum _flexcan_interrupt_enable
|
|
{
|
|
kFLEXCAN_BusOffInterruptEnable = CAN_CTRL1_BOFFMSK_MASK, /*!< Bus Off interrupt, use bit 15. */
|
|
kFLEXCAN_ErrorInterruptEnable = CAN_CTRL1_ERRMSK_MASK, /*!< CAN Error interrupt, use bit 14. */
|
|
kFLEXCAN_TxWarningInterruptEnable = CAN_CTRL1_TWRNMSK_MASK, /*!< Tx Warning interrupt, use bit 11. */
|
|
kFLEXCAN_RxWarningInterruptEnable = CAN_CTRL1_RWRNMSK_MASK, /*!< Rx Warning interrupt, use bit 10. */
|
|
kFLEXCAN_WakeUpInterruptEnable = CAN_MCR_WAKMSK_MASK, /*!< Self Wake Up interrupt, use bit 26. */
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE) && FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE)
|
|
kFLEXCAN_FDErrorInterruptEnable = CAN_CTRL2_ERRMSK_FAST_MASK, /*!< CAN FD Error interrupt, use bit 31. */
|
|
#endif
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_PN_MODE) && FSL_FEATURE_FLEXCAN_HAS_PN_MODE)
|
|
/*! PN Match Wake Up interrupt, use high word bit 17. */
|
|
kFLEXCAN_PNMatchWakeUpInterruptEnable = FLEXCAN_PN_INT_MASK(CAN_CTRL1_PN_WTOF_MSK_MASK),
|
|
/*! PN Timeout Wake Up interrupt, use high word bit 16. */
|
|
kFLEXCAN_PNTimeoutWakeUpInterruptEnable = FLEXCAN_PN_INT_MASK(CAN_CTRL1_PN_WUMF_MSK_MASK),
|
|
#endif
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_ENHANCED_RX_FIFO) && FSL_FEATURE_FLEXCAN_HAS_ENHANCED_RX_FIFO)
|
|
/*!< Enhanced Rx FIFO Underflow interrupt, use high word bit 31. */
|
|
kFLEXCAN_ERxFifoUnderflowInterruptEnable = FLEXCAN_EFIFO_INT_MASK(CAN_ERFIER_ERFUFWIE_MASK),
|
|
/*!< Enhanced Rx FIFO Overflow interrupt, use high word bit 30. */
|
|
kFLEXCAN_ERxFifoOverflowInterruptEnable = FLEXCAN_EFIFO_INT_MASK(CAN_ERFIER_ERFOVFIE_MASK),
|
|
/*!< Enhanced Rx FIFO Watermark interrupt, use high word bit 29. */
|
|
kFLEXCAN_ERxFifoWatermarkInterruptEnable = FLEXCAN_EFIFO_INT_MASK(CAN_ERFIER_ERFWMIIE_MASK),
|
|
/*!< Enhanced Rx FIFO Data Avilable interrupt, use high word bit 28. */
|
|
kFLEXCAN_ERxFifoDataAvlInterruptEnable = FLEXCAN_EFIFO_INT_MASK(CAN_ERFIER_ERFDAIE_MASK),
|
|
#endif
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_MEMORY_ERROR_CONTROL) && FSL_FEATURE_FLEXCAN_HAS_MEMORY_ERROR_CONTROL)
|
|
/*! Host Access With Non-Correctable Errors interrupt, use high word bit 0. */
|
|
kFLEXCAN_HostAccessNCErrorInterruptEnable = FLEXCAN_MECR_INT_MASK(CAN_MECR_HANCEI_MSK_MASK),
|
|
/*! FlexCAN Access With Non-Correctable Errors interrupt, use high word bit 2. */
|
|
kFLEXCAN_FlexCanAccessNCErrorInterruptEnable = FLEXCAN_MECR_INT_MASK(CAN_MECR_FANCEI_MSK_MASK),
|
|
/*! Host or FlexCAN Access With Correctable Errors interrupt, use high word bit 3. */
|
|
kFLEXCAN_HostOrFlexCanCErrorInterruptEnable = FLEXCAN_MECR_INT_MASK(CAN_MECR_CEI_MSK_MASK),
|
|
#endif
|
|
};
|
|
|
|
/*!
|
|
* @brief FlexCAN status flags.
|
|
*
|
|
* This provides constants for the FlexCAN status flags for use in the FlexCAN functions.
|
|
* @note The CPU read action clears the bits corresponding to the FlEXCAN_ErrorFlag macro, therefore user need to
|
|
* read status flags and distinguish which error is occur using @ref _flexcan_error_flags enumerations.
|
|
*/
|
|
enum _flexcan_flags
|
|
{
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE) && FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE)
|
|
kFLEXCAN_ErrorOverrunFlag = CAN_ESR1_ERROVR_MASK, /*!< Error Overrun Status. */
|
|
kFLEXCAN_FDErrorIntFlag = CAN_ESR1_ERRINT_FAST_MASK, /*!< CAN FD Error Interrupt Flag. */
|
|
kFLEXCAN_BusoffDoneIntFlag = CAN_ESR1_BOFFDONEINT_MASK, /*!< Bus Off process completed Interrupt Flag. */
|
|
#endif
|
|
kFLEXCAN_SynchFlag = CAN_ESR1_SYNCH_MASK, /*!< CAN Synchronization Status. */
|
|
kFLEXCAN_TxWarningIntFlag = CAN_ESR1_TWRNINT_MASK, /*!< Tx Warning Interrupt Flag. */
|
|
kFLEXCAN_RxWarningIntFlag = CAN_ESR1_RWRNINT_MASK, /*!< Rx Warning Interrupt Flag. */
|
|
kFLEXCAN_IdleFlag = CAN_ESR1_IDLE_MASK, /*!< FlexCAN In IDLE Status. */
|
|
kFLEXCAN_FaultConfinementFlag = CAN_ESR1_FLTCONF_MASK, /*!< FlexCAN Fault Confinement State. */
|
|
kFLEXCAN_TransmittingFlag = CAN_ESR1_TX_MASK, /*!< FlexCAN In Transmission Status. */
|
|
kFLEXCAN_ReceivingFlag = CAN_ESR1_RX_MASK, /*!< FlexCAN In Reception Status. */
|
|
kFLEXCAN_BusOffIntFlag = CAN_ESR1_BOFFINT_MASK, /*!< Bus Off Interrupt Flag. */
|
|
kFLEXCAN_ErrorIntFlag = CAN_ESR1_ERRINT_MASK, /*!< CAN Error Interrupt Flag. */
|
|
kFLEXCAN_WakeUpIntFlag = CAN_ESR1_WAKINT_MASK, /*!< Self Wake-Up Interrupt Flag. */
|
|
kFLEXCAN_ErrorFlag =
|
|
(uint32_t)(/*!< All FlexCAN Read Clear Error Status. */
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE) && FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE)
|
|
CAN_ESR1_STFERR_FAST_MASK | CAN_ESR1_FRMERR_FAST_MASK | CAN_ESR1_CRCERR_FAST_MASK |
|
|
CAN_ESR1_BIT0ERR_FAST_MASK | CAN_ESR1_BIT1ERR_FAST_MASK | CAN_ESR1_ERROVR_MASK |
|
|
#endif
|
|
CAN_ESR1_TXWRN_MASK | CAN_ESR1_RXWRN_MASK | CAN_ESR1_BIT1ERR_MASK | CAN_ESR1_BIT0ERR_MASK |
|
|
CAN_ESR1_ACKERR_MASK | CAN_ESR1_CRCERR_MASK | CAN_ESR1_FRMERR_MASK | CAN_ESR1_STFERR_MASK),
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_PN_MODE) && FSL_FEATURE_FLEXCAN_HAS_PN_MODE)
|
|
kFLEXCAN_PNMatchIntFlag = FLEXCAN_PN_STATUS_MASK(CAN_WU_MTC_WUMF_MASK), /*!< PN Matching Event Interrupt Flag. */
|
|
kFLEXCAN_PNTimeoutIntFlag = FLEXCAN_PN_STATUS_MASK(CAN_WU_MTC_WTOF_MASK), /*!< PN Timeout Event Interrupt Flag. */
|
|
#endif
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_ENHANCED_RX_FIFO) && FSL_FEATURE_FLEXCAN_HAS_ENHANCED_RX_FIFO)
|
|
kFLEXCAN_ERxFifoUnderflowIntFlag =
|
|
FLEXCAN_EFIFO_STATUS_MASK(CAN_ERFSR_ERFUFW_MASK), /*!< Enhanced Rx FIFO underflow Interrupt Flag. */
|
|
kFLEXCAN_ERxFifoOverflowIntFlag =
|
|
FLEXCAN_EFIFO_STATUS_MASK(CAN_ERFSR_ERFOVF_MASK), /*!< Enhanced Rx FIFO overflow Interrupt Flag. */
|
|
kFLEXCAN_ERxFifoWatermarkIntFlag =
|
|
FLEXCAN_EFIFO_STATUS_MASK(CAN_ERFSR_ERFWMI_MASK), /*!< Enhanced Rx FIFO watermark Interrupt Flag. */
|
|
kFLEXCAN_ERxFifoDataAvlIntFlag =
|
|
FLEXCAN_EFIFO_STATUS_MASK(CAN_ERFSR_ERFDA_MASK), /*!< Enhanced Rx FIFO data available Interrupt Flag. */
|
|
kFLEXCAN_ERxFifoEmptyFlag = FLEXCAN_EFIFO_STATUS_MASK(CAN_ERFSR_ERFE_MASK), /*!< Enhanced Rx FIFO empty status. */
|
|
kFLEXCAN_ERxFifoFullFlag = FLEXCAN_EFIFO_STATUS_MASK(CAN_ERFSR_ERFF_MASK), /*!< Enhanced Rx FIFO full status. */
|
|
#endif
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_MEMORY_ERROR_CONTROL) && FSL_FEATURE_FLEXCAN_HAS_MEMORY_ERROR_CONTROL)
|
|
/*! Host Access With Non-Correctable Error Interrupt Flag. */
|
|
kFLEXCAN_HostAccessNonCorrectableErrorIntFlag = FLEXCAN_MECR_INT_MASK(CAN_ERRSR_HANCEIF_MASK),
|
|
/*! FlexCAN Access With Non-Correctable Error Interrupt Flag. */
|
|
kFLEXCAN_FlexCanAccessNonCorrectableErrorIntFlag = FLEXCAN_MECR_INT_MASK(CAN_ERRSR_FANCEIF_MASK),
|
|
/*! Correctable Error Interrupt Flag. */
|
|
kFLEXCAN_CorrectableErrorIntFlag = FLEXCAN_MECR_INT_MASK(CAN_ERRSR_CEIF_MASK),
|
|
/*! Host Access With Non-Correctable Error Interrupt Overrun Flag. */
|
|
kFLEXCAN_HostAccessNonCorrectableErrorOverrunFlag = FLEXCAN_MECR_INT_MASK(CAN_ERRSR_HANCEIOF_MASK),
|
|
/*! FlexCAN Access With Non-Correctable Error Interrupt Overrun Flag. */
|
|
kFLEXCAN_FlexCanAccessNonCorrectableErrorOverrunFlag = FLEXCAN_MECR_INT_MASK(CAN_ERRSR_FANCEIOF_MASK),
|
|
/*! Correctable Error Interrupt Overrun Flag. */
|
|
kFLEXCAN_CorrectableErrorOverrunFlag = FLEXCAN_MECR_INT_MASK(CAN_ERRSR_CEIOF_MASK),
|
|
/*! All Memory Error Flags. */
|
|
kFLEXCAN_AllMemoryErrorFlag =
|
|
(kFLEXCAN_HostAccessNonCorrectableErrorIntFlag | kFLEXCAN_FlexCanAccessNonCorrectableErrorIntFlag |
|
|
kFLEXCAN_CorrectableErrorIntFlag | kFLEXCAN_HostAccessNonCorrectableErrorOverrunFlag |
|
|
kFLEXCAN_FlexCanAccessNonCorrectableErrorOverrunFlag | kFLEXCAN_CorrectableErrorOverrunFlag)
|
|
#endif
|
|
};
|
|
|
|
/*!
|
|
* @brief FlexCAN error status flags.
|
|
*
|
|
* The FlexCAN Error Status enumerations is used to report current error of the FlexCAN bus.
|
|
* This enumerations should be used with KFLEXCAN_ErrorFlag in @ref _flexcan_flags enumerations
|
|
* to ditermine which error is generated.
|
|
*/
|
|
enum _flexcan_error_flags
|
|
{
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE) && FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE)
|
|
kFLEXCAN_FDStuffingError = CAN_ESR1_STFERR_FAST_MASK, /*!< Stuffing Error. */
|
|
kFLEXCAN_FDFormError = CAN_ESR1_FRMERR_FAST_MASK, /*!< Form Error. */
|
|
kFLEXCAN_FDCrcError = CAN_ESR1_CRCERR_FAST_MASK, /*!< Cyclic Redundancy Check Error. */
|
|
kFLEXCAN_FDBit0Error = CAN_ESR1_BIT0ERR_FAST_MASK, /*!< Unable to send dominant bit. */
|
|
kFLEXCAN_FDBit1Error = (int)CAN_ESR1_BIT1ERR_FAST_MASK, /*!< Unable to send recessive bit. */
|
|
#endif
|
|
kFLEXCAN_TxErrorWarningFlag = CAN_ESR1_TXWRN_MASK, /*!< Tx Error Warning Status. */
|
|
kFLEXCAN_RxErrorWarningFlag = CAN_ESR1_RXWRN_MASK, /*!< Rx Error Warning Status. */
|
|
kFLEXCAN_StuffingError = CAN_ESR1_STFERR_MASK, /*!< Stuffing Error. */
|
|
kFLEXCAN_FormError = CAN_ESR1_FRMERR_MASK, /*!< Form Error. */
|
|
kFLEXCAN_CrcError = CAN_ESR1_CRCERR_MASK, /*!< Cyclic Redundancy Check Error. */
|
|
kFLEXCAN_AckError = CAN_ESR1_ACKERR_MASK, /*!< Received no ACK on transmission. */
|
|
kFLEXCAN_Bit0Error = CAN_ESR1_BIT0ERR_MASK, /*!< Unable to send dominant bit. */
|
|
kFLEXCAN_Bit1Error = CAN_ESR1_BIT1ERR_MASK, /*!< Unable to send recessive bit. */
|
|
};
|
|
|
|
/*!
|
|
* @brief FlexCAN Legacy Rx FIFO status flags.
|
|
*
|
|
* The FlexCAN Legacy Rx FIFO Status enumerations are used to determine the status of the
|
|
* Rx FIFO. Because Rx FIFO occupy the MB0 ~ MB7 (Rx Fifo filter also occupies
|
|
* more Message Buffer space), Rx FIFO status flags are mapped to the corresponding
|
|
* Message Buffer status flags.
|
|
*/
|
|
enum
|
|
{
|
|
kFLEXCAN_RxFifoOverflowFlag = CAN_IFLAG1_BUF7I_MASK, /*!< Rx FIFO overflow flag. */
|
|
kFLEXCAN_RxFifoWarningFlag = CAN_IFLAG1_BUF6I_MASK, /*!< Rx FIFO almost full flag. */
|
|
kFLEXCAN_RxFifoFrameAvlFlag = CAN_IFLAG1_BUF5I_MASK, /*!< Frames available in Rx FIFO flag. */
|
|
};
|
|
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_MEMORY_ERROR_CONTROL) && FSL_FEATURE_FLEXCAN_HAS_MEMORY_ERROR_CONTROL)
|
|
/*!
|
|
* @brief FlexCAN Memory Error Type.
|
|
*/
|
|
typedef enum _flexcan_memory_error_type
|
|
{
|
|
kFLEXCAN_CorrectableError = 0U, /*!< The memory error is correctable which means on bit error. */
|
|
kFLEXCAN_NonCorrectableError /*!< The memory error is non-correctable which means two bit errors. */
|
|
} flexcan_memory_error_type_t;
|
|
|
|
/*!
|
|
* @brief FlexCAN Memory Access Type.
|
|
*/
|
|
typedef enum _flexcan_memory_access_type
|
|
{
|
|
kFLEXCAN_MoveOutFlexCanAccess = 0U, /*!< The memory error was detected during move-out FlexCAN access. */
|
|
kFLEXCAN_MoveInAccess, /*!< The memory error was detected during move-in FlexCAN access. */
|
|
kFLEXCAN_TxArbitrationAccess, /*!< The memory error was detected during Tx Arbitration FlexCAN access. */
|
|
kFLEXCAN_RxMatchingAccess, /*!< The memory error was detected during Rx Matching FlexCAN access. */
|
|
kFLEXCAN_MoveOutHostAccess /*!< The memory error was detected during Rx Matching Host (CPU) access. */
|
|
} flexcan_memory_access_type_t;
|
|
|
|
/*!
|
|
* @brief FlexCAN Memory Error Byte Syndrome.
|
|
*/
|
|
typedef enum _flexcan_byte_error_syndrome
|
|
{
|
|
kFLEXCAN_NoError = 0U, /*!< No bit error in this byte. */
|
|
kFLEXCAN_ParityBits0Error = 1U, /*!< Parity bit 0 error in this byte. */
|
|
kFLEXCAN_ParityBits1Error = 2U, /*!< Parity bit 1 error in this byte. */
|
|
kFLEXCAN_ParityBits2Error = 4U, /*!< Parity bit 2 error in this byte. */
|
|
kFLEXCAN_ParityBits3Error = 8U, /*!< Parity bit 3 error in this byte. */
|
|
kFLEXCAN_ParityBits4Error = 16U, /*!< Parity bit 4 error in this byte. */
|
|
kFLEXCAN_DataBits0Error = 28U, /*!< Data bit 0 error in this byte. */
|
|
kFLEXCAN_DataBits1Error = 22U, /*!< Data bit 1 error in this byte. */
|
|
kFLEXCAN_DataBits2Error = 19U, /*!< Data bit 2 error in this byte. */
|
|
kFLEXCAN_DataBits3Error = 25U, /*!< Data bit 3 error in this byte. */
|
|
kFLEXCAN_DataBits4Error = 26U, /*!< Data bit 4 error in this byte. */
|
|
kFLEXCAN_DataBits5Error = 7U, /*!< Data bit 5 error in this byte. */
|
|
kFLEXCAN_DataBits6Error = 21U, /*!< Data bit 6 error in this byte. */
|
|
kFLEXCAN_DataBits7Error = 14U, /*!< Data bit 7 error in this byte. */
|
|
kFLEXCAN_AllZeroError = 6U, /*!< All-zeros non-correctable error in this byte. */
|
|
kFLEXCAN_AllOneError = 31U, /*!< All-ones non-correctable error in this byte. */
|
|
kFLEXCAN_NonCorrectableErrors /*!< Non-correctable error in this byte. */
|
|
} flexcan_byte_error_syndrome_t;
|
|
|
|
/*!
|
|
* @brief FlexCAN memory error register status structure
|
|
*
|
|
* This structure contains the memory access properties that caused a memory error access.
|
|
* It is used as the parameter of FLEXCAN_GetMemoryErrorReportStatus() function. And user can
|
|
* use FLEXCAN_GetMemoryErrorReportStatus to get the status of the last memory error access.
|
|
*/
|
|
typedef struct _flexcan_memory_error_report_status
|
|
{
|
|
flexcan_memory_error_type_t errorType; /*!< The type of memory error that giving rise to the report. */
|
|
flexcan_memory_access_type_t accessType; /*!< The type of memory access that giving rise to the memory error. */
|
|
uint16_t accessAddress; /*!< The address where memory error detected. */
|
|
uint32_t errorData; /*!< The raw data word read from memory with error. */
|
|
struct
|
|
{
|
|
bool byteIsRead; /*!< The byte n (0~3) was read or not. */
|
|
/*!< The type of error and which bit in byte (n) is affected by the error. */
|
|
flexcan_byte_error_syndrome_t bitAffected;
|
|
} byteStatus[4];
|
|
} flexcan_memory_error_report_status_t;
|
|
#endif
|
|
|
|
#if defined(__CC_ARM)
|
|
#pragma anon_unions
|
|
#endif
|
|
/*! @brief FlexCAN message frame structure. */
|
|
typedef struct _flexcan_frame
|
|
{
|
|
struct
|
|
{
|
|
uint32_t timestamp : 16; /*!< FlexCAN internal Free-Running Counter Time Stamp. */
|
|
uint32_t length : 4; /*!< CAN frame data length in bytes (Range: 0~8). */
|
|
uint32_t type : 1; /*!< CAN Frame Type(DATA or REMOTE). */
|
|
uint32_t format : 1; /*!< CAN Frame Identifier(STD or EXT format). */
|
|
uint32_t : 1; /*!< Reserved. */
|
|
uint32_t idhit : 9; /*!< CAN Rx FIFO filter hit id(This value is only used in Rx FIFO receive mode). */
|
|
};
|
|
struct
|
|
{
|
|
uint32_t id : 29; /*!< CAN Frame Identifier, should be set using FLEXCAN_ID_EXT() or FLEXCAN_ID_STD() macro. */
|
|
uint32_t : 3; /*!< Reserved. */
|
|
};
|
|
union
|
|
{
|
|
struct
|
|
{
|
|
uint32_t dataWord0; /*!< CAN Frame payload word0. */
|
|
uint32_t dataWord1; /*!< CAN Frame payload word1. */
|
|
};
|
|
struct
|
|
{
|
|
uint8_t dataByte3; /*!< CAN Frame payload byte3. */
|
|
uint8_t dataByte2; /*!< CAN Frame payload byte2. */
|
|
uint8_t dataByte1; /*!< CAN Frame payload byte1. */
|
|
uint8_t dataByte0; /*!< CAN Frame payload byte0. */
|
|
uint8_t dataByte7; /*!< CAN Frame payload byte7. */
|
|
uint8_t dataByte6; /*!< CAN Frame payload byte6. */
|
|
uint8_t dataByte5; /*!< CAN Frame payload byte5. */
|
|
uint8_t dataByte4; /*!< CAN Frame payload byte4. */
|
|
};
|
|
};
|
|
} flexcan_frame_t;
|
|
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE) && FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE)
|
|
/*! @brief CAN FD message frame structure.
|
|
*
|
|
* The CAN FD message supporting up to sixty four bytes can be used for a data frame, depending on the length
|
|
* selected for the message buffers. The length should be a enumeration member, see @ref _flexcan_fd_frame_length.
|
|
*/
|
|
typedef struct _flexcan_fd_frame
|
|
{
|
|
struct
|
|
{
|
|
uint32_t timestamp : 16; /*!< FlexCAN internal Free-Running Counter Time Stamp. */
|
|
uint32_t length : 4; /*!< CAN FD frame data length code (DLC), range see @ref _flexcan_fd_frame_length, When the
|
|
length <= 8, it equal to the data length, otherwise the number of valid frame data is
|
|
not equal to the length value. user can
|
|
use DLC_LENGTH_DECODE(length) macro to get the number of valid data bytes. */
|
|
uint32_t type : 1; /*!< CAN Frame Type(DATA or REMOTE). */
|
|
uint32_t format : 1; /*!< CAN Frame Identifier(STD or EXT format). */
|
|
uint32_t srr : 1; /*!< Substitute Remote request. */
|
|
uint32_t : 6;
|
|
uint32_t esi : 1; /*!< Error State Indicator. */
|
|
uint32_t brs : 1; /*!< Bit Rate Switch. */
|
|
uint32_t edl : 1; /*!< Extended Data Length. */
|
|
};
|
|
struct
|
|
{
|
|
uint32_t id : 29; /*!< CAN Frame Identifier, should be set using FLEXCAN_ID_EXT() or FLEXCAN_ID_STD() macro. */
|
|
uint32_t : 3; /*!< Reserved. */
|
|
};
|
|
union
|
|
{
|
|
struct
|
|
{
|
|
uint32_t dataWord[16]; /*!< CAN FD Frame payload, 16 double word maximum. */
|
|
};
|
|
/* Note: the maximum databyte* below is actually 64, user can add them if needed,
|
|
or just use dataWord[*] instead. */
|
|
struct
|
|
{
|
|
uint8_t dataByte3; /*!< CAN Frame payload byte3. */
|
|
uint8_t dataByte2; /*!< CAN Frame payload byte2. */
|
|
uint8_t dataByte1; /*!< CAN Frame payload byte1. */
|
|
uint8_t dataByte0; /*!< CAN Frame payload byte0. */
|
|
uint8_t dataByte7; /*!< CAN Frame payload byte7. */
|
|
uint8_t dataByte6; /*!< CAN Frame payload byte6. */
|
|
uint8_t dataByte5; /*!< CAN Frame payload byte5. */
|
|
uint8_t dataByte4; /*!< CAN Frame payload byte4. */
|
|
};
|
|
};
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_ENHANCED_RX_FIFO) && FSL_FEATURE_FLEXCAN_HAS_ENHANCED_RX_FIFO)
|
|
/*! @note ID HIT offset is changed dynamically according to data length code (DLC), when DLC is 15, they will be
|
|
* located below. Using FLEXCAN_FixEnhancedRxFifoFrameIdHit API is recommended to ensure this idhit value is
|
|
* correct.*/
|
|
uint32_t idhit; /*!< CAN Enhanced Rx FIFO filter hit id (This value is only used in Enhanced Rx FIFO receive
|
|
mode). */
|
|
#endif
|
|
} flexcan_fd_frame_t;
|
|
#endif
|
|
|
|
/*! @brief FlexCAN protocol timing characteristic configuration structure. */
|
|
typedef struct _flexcan_timing_config
|
|
{
|
|
uint16_t preDivider; /*!< Classic CAN or CAN FD nominal phase bit rate prescaler. */
|
|
uint8_t rJumpwidth; /*!< Classic CAN or CAN FD nominal phase Re-sync Jump Width. */
|
|
uint8_t phaseSeg1; /*!< Classic CAN or CAN FD nominal phase Segment 1. */
|
|
uint8_t phaseSeg2; /*!< Classic CAN or CAN FD nominal phase Segment 2. */
|
|
uint8_t propSeg; /*!< Classic CAN or CAN FD nominal phase Propagation Segment. */
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE) && FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE)
|
|
uint16_t fpreDivider; /*!< CAN FD data phase bit rate prescaler. */
|
|
uint8_t frJumpwidth; /*!< CAN FD data phase Re-sync Jump Width. */
|
|
uint8_t fphaseSeg1; /*!< CAN FD data phase Phase Segment 1. */
|
|
uint8_t fphaseSeg2; /*!< CAN FD data phase Phase Segment 2. */
|
|
uint8_t fpropSeg; /*!< CAN FD data phase Propagation Segment. */
|
|
#endif
|
|
} flexcan_timing_config_t;
|
|
|
|
/*! @brief FlexCAN module configuration structure.
|
|
* @deprecated Do not use the baudRate. It has been superceded bitRate
|
|
* @deprecated Do not use the baudRateFD. It has been superceded bitRateFD
|
|
*/
|
|
typedef struct _flexcan_config
|
|
{
|
|
union
|
|
{
|
|
struct
|
|
{
|
|
uint32_t baudRate; /*!< FlexCAN bit rate in bps, for classical CAN or CANFD nominal phase. */
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE) && FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE)
|
|
uint32_t baudRateFD; /*!< FlexCAN FD bit rate in bps, for CANFD data phase. */
|
|
#endif
|
|
};
|
|
struct
|
|
{
|
|
uint32_t bitRate; /*!< FlexCAN bit rate in bps, for classical CAN or CANFD nominal phase. */
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE) && FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE)
|
|
uint32_t bitRateFD; /*!< FlexCAN FD bit rate in bps, for CANFD data phase. */
|
|
#endif
|
|
};
|
|
};
|
|
flexcan_clock_source_t clkSrc; /*!< Clock source for FlexCAN Protocol Engine. */
|
|
flexcan_wake_up_source_t wakeupSrc; /*!< Wake up source selection. */
|
|
uint8_t maxMbNum; /*!< The maximum number of Message Buffers used by user. */
|
|
bool enableLoopBack; /*!< Enable or Disable Loop Back Self Test Mode. */
|
|
bool enableTimerSync; /*!< Enable or Disable Timer Synchronization. */
|
|
bool enableSelfWakeup; /*!< Enable or Disable Self Wakeup Mode. */
|
|
bool enableIndividMask; /*!< Enable or Disable Rx Individual Mask and Queue feature. */
|
|
bool disableSelfReception; /*!< Enable or Disable Self Reflection. */
|
|
bool enableListenOnlyMode; /*!< Enable or Disable Listen Only Mode. */
|
|
#if !(defined(FSL_FEATURE_FLEXCAN_HAS_NO_SUPV_SUPPORT) && FSL_FEATURE_FLEXCAN_HAS_NO_SUPV_SUPPORT)
|
|
bool enableSupervisorMode; /*!< Enable or Disable Supervisor Mode, enable this mode will make registers allow only
|
|
Supervisor access. */
|
|
#endif
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_DOZE_MODE_SUPPORT) && FSL_FEATURE_FLEXCAN_HAS_DOZE_MODE_SUPPORT)
|
|
bool enableDoze; /*!< Enable or Disable Doze Mode. */
|
|
#endif
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_PN_MODE) && FSL_FEATURE_FLEXCAN_HAS_PN_MODE)
|
|
bool enablePretendedeNetworking; /*!< Enable or Disable the Pretended Networking mode. */
|
|
#endif
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_MEMORY_ERROR_CONTROL) && FSL_FEATURE_FLEXCAN_HAS_MEMORY_ERROR_CONTROL)
|
|
bool enableMemoryErrorControl; /*!< Enable or Disable the memory errors detection and correction mechanism. */
|
|
bool enableNonCorrectableErrorEnterFreeze; /*!< Enable or Disable Non-Correctable Errors In FlexCAN Access Put
|
|
Device In Freeze Mode. */
|
|
#endif
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_ENHANCED_BIT_TIMING_REG) && FSL_FEATURE_FLEXCAN_HAS_ENHANCED_BIT_TIMING_REG)
|
|
bool enableTransceiverDelayMeasure; /*!< Enable or Disable the transceiver delay measurement, when it is enabled,
|
|
then the secondary sample point position is determined by the sum of the
|
|
transceiver delay measurement plus the enhanced TDC offset. */
|
|
#endif
|
|
flexcan_timing_config_t timingConfig; /* Protocol timing . */
|
|
} flexcan_config_t;
|
|
|
|
/*!
|
|
* @brief FlexCAN Receive Message Buffer configuration structure
|
|
*
|
|
* This structure is used as the parameter of FLEXCAN_SetRxMbConfig() function.
|
|
* The FLEXCAN_SetRxMbConfig() function is used to configure FlexCAN Receive
|
|
* Message Buffer. The function abort previous receiving process, clean the
|
|
* Message Buffer and activate the Rx Message Buffer using given Message Buffer
|
|
* setting.
|
|
*/
|
|
typedef struct _flexcan_rx_mb_config
|
|
{
|
|
uint32_t id; /*!< CAN Message Buffer Frame Identifier, should be set using
|
|
FLEXCAN_ID_EXT() or FLEXCAN_ID_STD() macro. */
|
|
flexcan_frame_format_t format; /*!< CAN Frame Identifier format(Standard of Extend). */
|
|
flexcan_frame_type_t type; /*!< CAN Frame Type(Data or Remote). */
|
|
} flexcan_rx_mb_config_t;
|
|
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_PN_MODE) && FSL_FEATURE_FLEXCAN_HAS_PN_MODE)
|
|
/*! @brief FlexCAN Pretended Networking match source selection. */
|
|
typedef enum _flexcan_pn_match_source
|
|
{
|
|
kFLEXCAN_PNMatSrcID = 0U, /*!< Message match with ID filtering. */
|
|
kFLEXCAN_PNMatSrcIDAndData, /*!< Message match with ID filtering and payload filtering. */
|
|
} flexcan_pn_match_source_t;
|
|
|
|
/*! @brief FlexCAN Pretended Networking mode match type. */
|
|
typedef enum _flexcan_pn_match_mode
|
|
{
|
|
kFLEXCAN_PNMatModeEqual = 0x0U, /*!< Match upon ID/Payload contents against an exact target value. */
|
|
kFLEXCAN_PNMatModeGreater, /*!< Match upon an ID/Payload value greater than or equal to a specified target value.
|
|
*/
|
|
kFLEXCAN_PNMatModeSmaller, /*!< Match upon an ID/Payload value smaller than or equal to a specified target value.
|
|
*/
|
|
kFLEXCAN_PNMatModeRange, /*!< Match upon an ID/Payload value inside a range, greater than or equal to a specified
|
|
lower limit, and smaller than or equal to a specified upper limit */
|
|
} flexcan_pn_match_mode_t;
|
|
|
|
/*!
|
|
* @brief FlexCAN Pretended Networking configuration structure
|
|
*
|
|
* This structure is used as the parameter of FLEXCAN_SetPNConfig() function.
|
|
* The FLEXCAN_SetPNConfig() function is used to configure FlexCAN Networking work mode.
|
|
*/
|
|
typedef struct _flexcan_pn_config
|
|
{
|
|
bool enableTimeout; /*!< Enable or Disable timeout event trigger wakeup.*/
|
|
uint16_t timeoutValue; /*!< The timeout value that generates a wakeup event, the counter timer is incremented based
|
|
on 64 times the CAN Bit Time unit. */
|
|
bool enableMatch; /*!< Enable or Disable match event trigger wakeup.*/
|
|
flexcan_pn_match_source_t matchSrc; /*!< Selects the match source (ID and/or data match) to trigger wakeup. */
|
|
uint8_t matchNum; /*!< The number of times a given message must match the predefined ID and/or data before
|
|
generating a wakeup event, range in 0x1 ~ 0xFF. */
|
|
flexcan_pn_match_mode_t idMatchMode; /*!< The ID match type. */
|
|
flexcan_pn_match_mode_t dataMatchMode; /*!< The data match type. */
|
|
uint32_t idLower; /*!< The ID target values 1 which used either for ID match "equal to", "smaller than",
|
|
"greater than" comparisons, or as the lower limit value in ID match "range detection". */
|
|
uint32_t idUpper; /*!< The ID target values 2 which used only as the upper limit value in ID match "range
|
|
detection" or used to store the ID mask in "equal to". */
|
|
uint8_t lengthLower; /*!< The lower limit for length of data bytes which used only in data match "range
|
|
detection". Range in 0x0 ~ 0x8.*/
|
|
uint8_t lengthUpper; /*!< The upper limit for length of data bytes which used only in data match "range
|
|
detection". Range in 0x0 ~ 0x8.*/
|
|
union
|
|
{
|
|
/*!< The data target values 1 which used either for data match "equal to", "smaller than",
|
|
"greater than" comparisons, or as the lower limit value in data match "range
|
|
detection". */
|
|
struct
|
|
{
|
|
uint32_t lowerWord0; /*!< CAN Frame payload word0. */
|
|
uint32_t lowerWord1; /*!< CAN Frame payload word1. */
|
|
};
|
|
struct
|
|
{
|
|
uint8_t lowerByte3; /*!< CAN Frame payload byte3. */
|
|
uint8_t lowerByte2; /*!< CAN Frame payload byte2. */
|
|
uint8_t lowerByte1; /*!< CAN Frame payload byte1. */
|
|
uint8_t lowerByte0; /*!< CAN Frame payload byte0. */
|
|
uint8_t lowerByte7; /*!< CAN Frame payload byte7. */
|
|
uint8_t lowerByte6; /*!< CAN Frame payload byte6. */
|
|
uint8_t lowerByte5; /*!< CAN Frame payload byte5. */
|
|
uint8_t lowerByte4; /*!< CAN Frame payload byte4. */
|
|
};
|
|
};
|
|
union
|
|
{
|
|
/*!< The data target values 2 which used only as the upper limit value in data match "range
|
|
detection" or used to store the data mask in "equal to". */
|
|
struct
|
|
{
|
|
uint32_t upperWord0; /*!< CAN Frame payload word0. */
|
|
uint32_t upperWord1; /*!< CAN Frame payload word1. */
|
|
};
|
|
struct
|
|
{
|
|
uint8_t upperByte3; /*!< CAN Frame payload byte3. */
|
|
uint8_t upperByte2; /*!< CAN Frame payload byte2. */
|
|
uint8_t upperByte1; /*!< CAN Frame payload byte1. */
|
|
uint8_t upperByte0; /*!< CAN Frame payload byte0. */
|
|
uint8_t upperByte7; /*!< CAN Frame payload byte7. */
|
|
uint8_t upperByte6; /*!< CAN Frame payload byte6. */
|
|
uint8_t upperByte5; /*!< CAN Frame payload byte5. */
|
|
uint8_t upperByte4; /*!< CAN Frame payload byte4. */
|
|
};
|
|
};
|
|
} flexcan_pn_config_t;
|
|
#endif
|
|
|
|
/*! @brief FlexCAN Legacy Rx FIFO configuration structure. */
|
|
typedef struct _flexcan_rx_fifo_config
|
|
{
|
|
uint32_t *idFilterTable; /*!< Pointer to the FlexCAN Legacy Rx FIFO identifier filter table. */
|
|
uint8_t idFilterNum; /*!< The FlexCAN Legacy Rx FIFO Filter elements quantity. */
|
|
flexcan_rx_fifo_filter_type_t idFilterType; /*!< The FlexCAN Legacy Rx FIFO Filter type. */
|
|
flexcan_rx_fifo_priority_t priority; /*!< The FlexCAN Legacy Rx FIFO receive priority. */
|
|
} flexcan_rx_fifo_config_t;
|
|
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_ENHANCED_RX_FIFO) && FSL_FEATURE_FLEXCAN_HAS_ENHANCED_RX_FIFO)
|
|
/*! @brief FlexCAN Enhanced Rx FIFO Standard ID filter element structure. */
|
|
typedef struct _flexcan_enhanced_rx_fifo_std_id_filter
|
|
{
|
|
uint32_t filterType : 2; /*!< FlexCAN internal Free-Running Counter Time Stamp. */
|
|
uint32_t : 2;
|
|
uint32_t rtr1 : 1; /*!< CAN FD frame data length code (DLC), range see @ref _flexcan_fd_frame_length, When the
|
|
length <= 8, it equal to the data length, otherwise the number of valid frame data is
|
|
not equal to the length value. user can
|
|
use DLC_LENGTH_DECODE(length) macro to get the number of valid data bytes. */
|
|
uint32_t std1 : 11; /*!< CAN Frame Type(DATA or REMOTE). */
|
|
uint32_t : 4;
|
|
uint32_t rtr2 : 1; /*!< CAN Frame Identifier(STD or EXT format). */
|
|
uint32_t std2 : 11; /*!< Substitute Remote request. */
|
|
} flexcan_enhanced_rx_fifo_std_id_filter_t;
|
|
|
|
/*! @brief FlexCAN Enhanced Rx FIFO Extended ID filter element structure. */
|
|
typedef struct _flexcan_enhanced_rx_fifo_ext_id_filter
|
|
{
|
|
uint32_t filterType : 2; /*!< FlexCAN internal Free-Running Counter Time Stamp. */
|
|
uint32_t rtr1 : 1; /*!< CAN FD frame data length code (DLC), range see @ref _flexcan_fd_frame_length, When the
|
|
length <= 8, it equal to the data length, otherwise the number of valid frame data is
|
|
not equal to the length value. user can
|
|
use DLC_LENGTH_DECODE(length) macro to get the number of valid data bytes. */
|
|
uint32_t std1 : 29; /*!< CAN Frame Type(DATA or REMOTE). */
|
|
uint32_t : 2;
|
|
uint32_t rtr2 : 1; /*!< CAN Frame Identifier(STD or EXT format). */
|
|
uint32_t std2 : 29; /*!< Substitute Remote request. */
|
|
} flexcan_enhanced_rx_fifo_ext_id_filter_t;
|
|
/*! @brief FlexCAN Enhanced Rx FIFO configuration structure. */
|
|
typedef struct _flexcan_enhanced_rx_fifo_config
|
|
{
|
|
uint32_t *idFilterTable; /*!< Pointer to the FlexCAN Enhanced Rx FIFO identifier filter table, each table member
|
|
occupies 32 bit word, table size should be equal to idFilterNum. There are two types of
|
|
Enhanced Rx FIFO filter elements that can be stored in table : extended-ID filter element
|
|
(1 word, occupie 1 table members) and standard-ID filter element (2 words, occupies 2 table
|
|
members), the extended-ID filter element needs to be placed in front of the table. */
|
|
uint8_t idFilterPairNum; /*!< (idFilterPairNum + 1) is the Enhanced Rx FIFO identifier filter element pair numbers,
|
|
each pair of filter elements occupies 2 words and can consist of one extended ID filter
|
|
element or two standard ID filter elements. */
|
|
uint8_t extendIdFilterNum; /*!< The number of extended ID filter element items in the FlexCAN enhanced Rx FIFO
|
|
identifier filter table, each extended-ID filter element occupies 2 words,
|
|
extendIdFilterNum need less than or equal to (idFilterPairNum + 1). */
|
|
uint8_t fifoWatermark; /*!< (fifoWatermark + 1) is the minimum number of CAN messages stored in the Enhanced RX FIFO
|
|
which can trigger FIFO watermark interrupt or a DMA request. */
|
|
flexcan_efifo_dma_per_read_length_t dmaPerReadLength; /*!< Define the length of each read of the Enhanced RX FIFO
|
|
element by the DAM, see @ref _flexcan_fd_frame_length. */
|
|
flexcan_rx_fifo_priority_t priority; /*!< The FlexCAN Enhanced Rx FIFO receive priority. */
|
|
} flexcan_enhanced_rx_fifo_config_t;
|
|
#endif
|
|
|
|
/*! @brief FlexCAN Message Buffer transfer. */
|
|
typedef struct _flexcan_mb_transfer
|
|
{
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE) && FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE)
|
|
flexcan_fd_frame_t *framefd;
|
|
#endif
|
|
flexcan_frame_t *frame; /*!< The buffer of CAN Message to be transfer. */
|
|
uint8_t mbIdx; /*!< The index of Message buffer used to transfer Message. */
|
|
} flexcan_mb_transfer_t;
|
|
|
|
/*! @brief FlexCAN Rx FIFO transfer. */
|
|
typedef struct _flexcan_fifo_transfer
|
|
{
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_ENHANCED_RX_FIFO) && FSL_FEATURE_FLEXCAN_HAS_ENHANCED_RX_FIFO)
|
|
flexcan_fd_frame_t *framefd; /*!< The buffer of CAN Message to be received from Enhanced Rx FIFO. */
|
|
size_t frameNum; /*!< Number of CAN Message need to be received from Ehanced Rx FIFO. */
|
|
#endif
|
|
flexcan_frame_t *frame; /*!< The buffer of CAN Message to be received from Rx FIFO. */
|
|
} flexcan_fifo_transfer_t;
|
|
|
|
/*! @brief FlexCAN handle structure definition. */
|
|
typedef struct _flexcan_handle flexcan_handle_t;
|
|
|
|
/*! @brief FlexCAN transfer callback function.
|
|
*
|
|
* The FlexCAN transfer callback returns a value from the underlying layer.
|
|
* If the status equals to kStatus_FLEXCAN_ErrorStatus, the result parameter is the Content of
|
|
* FlexCAN status register which can be used to get the working status(or error status) of FlexCAN module.
|
|
* If the status equals to other FlexCAN Message Buffer transfer status, the result is the index of
|
|
* Message Buffer that generate transfer event.
|
|
* If the status equals to other FlexCAN Message Buffer transfer status, the result is meaningless and should be
|
|
* Ignored.
|
|
*/
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_PN_MODE) && FSL_FEATURE_FLEXCAN_HAS_PN_MODE) || \
|
|
(defined(FSL_FEATURE_FLEXCAN_HAS_MEMORY_ERROR_CONTROL) && FSL_FEATURE_FLEXCAN_HAS_MEMORY_ERROR_CONTROL)
|
|
#define FLEXCAN_CALLBACK(x) \
|
|
void(x)(CAN_Type * base, flexcan_handle_t * handle, status_t status, uint64_t result, void *userData)
|
|
typedef void (*flexcan_transfer_callback_t)(
|
|
CAN_Type *base, flexcan_handle_t *handle, status_t status, uint64_t result, void *userData);
|
|
#else
|
|
#define FLEXCAN_CALLBACK(x) \
|
|
void(x)(CAN_Type * base, flexcan_handle_t * handle, status_t status, uint32_t result, void *userData)
|
|
typedef void (*flexcan_transfer_callback_t)(
|
|
CAN_Type *base, flexcan_handle_t *handle, status_t status, uint32_t result, void *userData);
|
|
#endif
|
|
|
|
/*! @brief FlexCAN handle structure. */
|
|
struct _flexcan_handle
|
|
{
|
|
flexcan_transfer_callback_t callback; /*!< Callback function. */
|
|
void *userData; /*!< FlexCAN callback function parameter.*/
|
|
flexcan_frame_t
|
|
*volatile mbFrameBuf[CAN_WORD1_COUNT]; /*!< The buffer for received CAN data from Message Buffers. */
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE) && FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE)
|
|
flexcan_fd_frame_t
|
|
*volatile mbFDFrameBuf[CAN_WORD1_COUNT]; /*!< The buffer for received CAN FD data from Message Buffers. */
|
|
#endif
|
|
flexcan_frame_t *volatile rxFifoFrameBuf; /*!< The buffer for received CAN data from Legacy Rx FIFO. */
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_ENHANCED_RX_FIFO) && FSL_FEATURE_FLEXCAN_HAS_ENHANCED_RX_FIFO)
|
|
flexcan_fd_frame_t *volatile rxFifoFDFrameBuf; /*!< The buffer for received CAN FD data from Ehanced Rx FIFO. */
|
|
size_t frameNum; /*!< The number of CAN messages remaining to be received. */
|
|
size_t transferTotalNum; /*!< Total CAN Message number need to be received from Ehanced Rx FIFO. */
|
|
#endif
|
|
volatile uint8_t mbState[CAN_WORD1_COUNT]; /*!< Message Buffer transfer state. */
|
|
volatile uint8_t rxFifoState; /*!< Rx FIFO transfer state. */
|
|
volatile uint32_t timestamp[CAN_WORD1_COUNT]; /*!< Mailbox transfer timestamp. */
|
|
};
|
|
|
|
/******************************************************************************
|
|
* API
|
|
*****************************************************************************/
|
|
|
|
#if defined(__cplusplus)
|
|
extern "C" {
|
|
#endif
|
|
|
|
/*!
|
|
* @name Initialization and deinitialization
|
|
* @{
|
|
*/
|
|
|
|
/*!
|
|
* @brief Enter FlexCAN Freeze Mode.
|
|
*
|
|
* This function makes the FlexCAN work under Freeze Mode.
|
|
*
|
|
* @param base FlexCAN peripheral base address.
|
|
*/
|
|
void FLEXCAN_EnterFreezeMode(CAN_Type *base);
|
|
|
|
/*!
|
|
* @brief Exit FlexCAN Freeze Mode.
|
|
*
|
|
* This function makes the FlexCAN leave Freeze Mode.
|
|
*
|
|
* @param base FlexCAN peripheral base address.
|
|
*/
|
|
void FLEXCAN_ExitFreezeMode(CAN_Type *base);
|
|
|
|
/*!
|
|
* @brief Get the FlexCAN instance from peripheral base address.
|
|
*
|
|
* @param base FlexCAN peripheral base address.
|
|
* @return FlexCAN instance.
|
|
*/
|
|
uint32_t FLEXCAN_GetInstance(CAN_Type *base);
|
|
|
|
/*!
|
|
* @brief Calculates the improved timing values by specific bit Rates for classical CAN.
|
|
*
|
|
* This function use to calculates the Classical CAN timing values according to the given bit rate. The Calculated
|
|
* timing values will be set in CTRL1/CBT/ENCBT register. The calculation is based on the recommendation of the CiA 301
|
|
* v4.2.0 and previous version document.
|
|
*
|
|
* @param base FlexCAN peripheral base address.
|
|
* @param bitRate The classical CAN speed in bps defined by user, should be less than or equal to 1Mbps.
|
|
* @param sourceClock_Hz The Source clock frequency in Hz.
|
|
* @param pTimingConfig Pointer to the FlexCAN timing configuration structure.
|
|
*
|
|
* @return TRUE if timing configuration found, FALSE if failed to find configuration.
|
|
*/
|
|
bool FLEXCAN_CalculateImprovedTimingValues(CAN_Type *base,
|
|
uint32_t bitRate,
|
|
uint32_t sourceClock_Hz,
|
|
flexcan_timing_config_t *pTimingConfig);
|
|
|
|
/*!
|
|
* @brief Initializes a FlexCAN instance.
|
|
*
|
|
* This function initializes the FlexCAN module with user-defined settings.
|
|
* This example shows how to set up the flexcan_config_t parameters and how
|
|
* to call the FLEXCAN_Init function by passing in these parameters.
|
|
* @code
|
|
* flexcan_config_t flexcanConfig;
|
|
* flexcanConfig.clkSrc = kFLEXCAN_ClkSrc0;
|
|
* flexcanConfig.bitRate = 1000000U;
|
|
* flexcanConfig.maxMbNum = 16;
|
|
* flexcanConfig.enableLoopBack = false;
|
|
* flexcanConfig.enableSelfWakeup = false;
|
|
* flexcanConfig.enableIndividMask = false;
|
|
* flexcanConfig.enableDoze = false;
|
|
* flexcanConfig.disableSelfReception = false;
|
|
* flexcanConfig.enableListenOnlyMode = false;
|
|
* flexcanConfig.timingConfig = timingConfig;
|
|
* FLEXCAN_Init(CAN0, &flexcanConfig, 40000000UL);
|
|
* @endcode
|
|
*
|
|
* @param base FlexCAN peripheral base address.
|
|
* @param pConfig Pointer to the user-defined configuration structure.
|
|
* @param sourceClock_Hz FlexCAN Protocol Engine clock source frequency in Hz.
|
|
*/
|
|
void FLEXCAN_Init(CAN_Type *base, const flexcan_config_t *pConfig, uint32_t sourceClock_Hz);
|
|
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE) && FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE)
|
|
/*!
|
|
* @brief Calculates the improved timing values by specific bit rates for CANFD.
|
|
*
|
|
* This function use to calculates the CANFD timing values according to the given nominal phase bit rate and data phase
|
|
* bit rate. The Calculated timing values will be set in CBT/ENCBT and FDCBT/EDCBT registers. The calculation is based
|
|
* on the recommendation of the CiA 1301 v1.0.0 document.
|
|
*
|
|
* @param base FlexCAN peripheral base address.
|
|
* @param bitRate The CANFD bus control speed in bps defined by user.
|
|
* @param bitRateFD The CAN FD data phase speed in bps defined by user. Equal to bitRate means disable bit rate
|
|
* switching.
|
|
* @param sourceClock_Hz The Source clock frequency in Hz.
|
|
* @param pTimingConfig Pointer to the FlexCAN timing configuration structure.
|
|
*
|
|
* @return TRUE if timing configuration found, FALSE if failed to find configuration
|
|
*/
|
|
bool FLEXCAN_FDCalculateImprovedTimingValues(CAN_Type *base,
|
|
uint32_t bitRate,
|
|
uint32_t bitRateFD,
|
|
uint32_t sourceClock_Hz,
|
|
flexcan_timing_config_t *pTimingConfig);
|
|
/*!
|
|
* @brief Initializes a FlexCAN instance.
|
|
*
|
|
* This function initializes the FlexCAN module with user-defined settings.
|
|
* This example shows how to set up the flexcan_config_t parameters and how
|
|
* to call the FLEXCAN_FDInit function by passing in these parameters.
|
|
* @code
|
|
* flexcan_config_t flexcanConfig;
|
|
* flexcanConfig.clkSrc = kFLEXCAN_ClkSrc0;
|
|
* flexcanConfig.bitRate = 1000000U;
|
|
* flexcanConfig.bitRateFD = 2000000U;
|
|
* flexcanConfig.maxMbNum = 16;
|
|
* flexcanConfig.enableLoopBack = false;
|
|
* flexcanConfig.enableSelfWakeup = false;
|
|
* flexcanConfig.enableIndividMask = false;
|
|
* flexcanConfig.disableSelfReception = false;
|
|
* flexcanConfig.enableListenOnlyMode = false;
|
|
* flexcanConfig.enableDoze = false;
|
|
* flexcanConfig.timingConfig = timingConfig;
|
|
* FLEXCAN_FDInit(CAN0, &flexcanConfig, 80000000UL, kFLEXCAN_16BperMB, true);
|
|
* @endcode
|
|
*
|
|
* @param base FlexCAN peripheral base address.
|
|
* @param pConfig Pointer to the user-defined configuration structure.
|
|
* @param sourceClock_Hz FlexCAN Protocol Engine clock source frequency in Hz.
|
|
* @param dataSize FlexCAN Message Buffer payload size. The actual transmitted or received CAN FD frame data size needs
|
|
* to be less than or equal to this value.
|
|
* @param brs True if bit rate switch is enabled in FD mode.
|
|
*/
|
|
void FLEXCAN_FDInit(
|
|
CAN_Type *base, const flexcan_config_t *pConfig, uint32_t sourceClock_Hz, flexcan_mb_size_t dataSize, bool brs);
|
|
#endif
|
|
|
|
/*!
|
|
* @brief De-initializes a FlexCAN instance.
|
|
*
|
|
* This function disables the FlexCAN module clock and sets all register values
|
|
* to the reset value.
|
|
*
|
|
* @param base FlexCAN peripheral base address.
|
|
*/
|
|
void FLEXCAN_Deinit(CAN_Type *base);
|
|
|
|
/*!
|
|
* @brief Gets the default configuration structure.
|
|
*
|
|
* This function initializes the FlexCAN configuration structure to default values. The default
|
|
* values are as follows.
|
|
* flexcanConfig->clkSrc = kFLEXCAN_ClkSrc0;
|
|
* flexcanConfig->bitRate = 1000000U;
|
|
* flexcanConfig->bitRateFD = 2000000U;
|
|
* flexcanConfig->maxMbNum = 16;
|
|
* flexcanConfig->enableLoopBack = false;
|
|
* flexcanConfig->enableSelfWakeup = false;
|
|
* flexcanConfig->enableIndividMask = false;
|
|
* flexcanConfig->disableSelfReception = false;
|
|
* flexcanConfig->enableListenOnlyMode = false;
|
|
* flexcanConfig->enableDoze = false;
|
|
* flexcanConfig->enableMemoryErrorControl = true;
|
|
* flexcanConfig->enableNonCorrectableErrorEnterFreeze = true;
|
|
* flexcanConfig.timingConfig = timingConfig;
|
|
*
|
|
* @param pConfig Pointer to the FlexCAN configuration structure.
|
|
*/
|
|
void FLEXCAN_GetDefaultConfig(flexcan_config_t *pConfig);
|
|
|
|
/* @} */
|
|
|
|
/*!
|
|
* @name Configuration.
|
|
* @{
|
|
*/
|
|
|
|
/*!
|
|
* @brief Sets the FlexCAN protocol timing characteristic.
|
|
*
|
|
* This function gives user settings to classical CAN or CANFD nominal phase timing characteristic.
|
|
* The function is for an experienced user. For less experienced users, call the FLEXCAN_GetDefaultConfig()
|
|
* and get the default timing characteristicsthe, then call FLEXCAN_Init() and fill the
|
|
* bit rate field.
|
|
*
|
|
* @note Calling FLEXCAN_SetTimingConfig() overrides the bit rate set in FLEXCAN_Init().
|
|
*
|
|
* @param base FlexCAN peripheral base address.
|
|
* @param pConfig Pointer to the timing configuration structure.
|
|
*/
|
|
void FLEXCAN_SetTimingConfig(CAN_Type *base, const flexcan_timing_config_t *pConfig);
|
|
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE) && FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE)
|
|
/*!
|
|
* @brief Sets the FlexCAN CANFD data phase timing characteristic.
|
|
*
|
|
* This function gives user settings to CANFD data phase timing characteristic.
|
|
* The function is for an experienced user. For less experienced users, call the FLEXCAN_GetDefaultConfig()
|
|
* and get the default timing characteristicsthe, then call FLEXCAN_FDInit() and fill the
|
|
* data phase bit rate field.
|
|
*
|
|
* @note Calling FLEXCAN_SetFDTimingConfig() overrides the bit rate set in FLEXCAN_FDInit().
|
|
*
|
|
* @param base FlexCAN peripheral base address.
|
|
* @param pConfig Pointer to the timing configuration structure.
|
|
*/
|
|
void FLEXCAN_SetFDTimingConfig(CAN_Type *base, const flexcan_timing_config_t *pConfig);
|
|
#endif
|
|
|
|
/*!
|
|
* @brief Sets the FlexCAN receive message buffer global mask.
|
|
*
|
|
* This function sets the global mask for the FlexCAN message buffer in a matching process.
|
|
* The configuration is only effective when the Rx individual mask is disabled in the FLEXCAN_Init().
|
|
*
|
|
* @param base FlexCAN peripheral base address.
|
|
* @param mask Rx Message Buffer Global Mask value.
|
|
*/
|
|
void FLEXCAN_SetRxMbGlobalMask(CAN_Type *base, uint32_t mask);
|
|
|
|
/*!
|
|
* @brief Sets the FlexCAN receive FIFO global mask.
|
|
*
|
|
* This function sets the global mask for FlexCAN FIFO in a matching process.
|
|
*
|
|
* @param base FlexCAN peripheral base address.
|
|
* @param mask Rx Fifo Global Mask value.
|
|
*/
|
|
void FLEXCAN_SetRxFifoGlobalMask(CAN_Type *base, uint32_t mask);
|
|
|
|
/*!
|
|
* @brief Sets the FlexCAN receive individual mask.
|
|
*
|
|
* This function sets the individual mask for the FlexCAN matching process.
|
|
* The configuration is only effective when the Rx individual mask is enabled in the FLEXCAN_Init().
|
|
* If the Rx FIFO is disabled, the individual mask is applied to the corresponding Message Buffer.
|
|
* If the Rx FIFO is enabled, the individual mask for Rx FIFO occupied Message Buffer is applied to
|
|
* the Rx Filter with the same index. Note that only the first 32
|
|
* individual masks can be used as the Rx FIFO filter mask.
|
|
*
|
|
* @param base FlexCAN peripheral base address.
|
|
* @param maskIdx The Index of individual Mask.
|
|
* @param mask Rx Individual Mask value.
|
|
*/
|
|
void FLEXCAN_SetRxIndividualMask(CAN_Type *base, uint8_t maskIdx, uint32_t mask);
|
|
|
|
/*!
|
|
* @brief Configures a FlexCAN transmit message buffer.
|
|
*
|
|
* This function aborts the previous transmission, cleans the Message Buffer, and
|
|
* configures it as a Transmit Message Buffer.
|
|
*
|
|
* @param base FlexCAN peripheral base address.
|
|
* @param mbIdx The Message Buffer index.
|
|
* @param enable Enable/disable Tx Message Buffer.
|
|
* - true: Enable Tx Message Buffer.
|
|
* - false: Disable Tx Message Buffer.
|
|
*/
|
|
void FLEXCAN_SetTxMbConfig(CAN_Type *base, uint8_t mbIdx, bool enable);
|
|
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE) && FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE)
|
|
/*!
|
|
* @brief Configures a FlexCAN transmit message buffer.
|
|
*
|
|
* This function aborts the previous transmission, cleans the Message Buffer, and
|
|
* configures it as a Transmit Message Buffer.
|
|
*
|
|
* @param base FlexCAN peripheral base address.
|
|
* @param mbIdx The Message Buffer index.
|
|
* @param enable Enable/disable Tx Message Buffer.
|
|
* - true: Enable Tx Message Buffer.
|
|
* - false: Disable Tx Message Buffer.
|
|
*/
|
|
void FLEXCAN_SetFDTxMbConfig(CAN_Type *base, uint8_t mbIdx, bool enable);
|
|
#endif
|
|
|
|
/*!
|
|
* @brief Configures a FlexCAN Receive Message Buffer.
|
|
*
|
|
* This function cleans a FlexCAN build-in Message Buffer and configures it
|
|
* as a Receive Message Buffer.
|
|
*
|
|
* @param base FlexCAN peripheral base address.
|
|
* @param mbIdx The Message Buffer index.
|
|
* @param pRxMbConfig Pointer to the FlexCAN Message Buffer configuration structure.
|
|
* @param enable Enable/disable Rx Message Buffer.
|
|
* - true: Enable Rx Message Buffer.
|
|
* - false: Disable Rx Message Buffer.
|
|
*/
|
|
void FLEXCAN_SetRxMbConfig(CAN_Type *base, uint8_t mbIdx, const flexcan_rx_mb_config_t *pRxMbConfig, bool enable);
|
|
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE) && FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE)
|
|
/*!
|
|
* @brief Configures a FlexCAN Receive Message Buffer.
|
|
*
|
|
* This function cleans a FlexCAN build-in Message Buffer and configures it
|
|
* as a Receive Message Buffer.
|
|
*
|
|
* @param base FlexCAN peripheral base address.
|
|
* @param mbIdx The Message Buffer index.
|
|
* @param pRxMbConfig Pointer to the FlexCAN Message Buffer configuration structure.
|
|
* @param enable Enable/disable Rx Message Buffer.
|
|
* - true: Enable Rx Message Buffer.
|
|
* - false: Disable Rx Message Buffer.
|
|
*/
|
|
void FLEXCAN_SetFDRxMbConfig(CAN_Type *base, uint8_t mbIdx, const flexcan_rx_mb_config_t *pRxMbConfig, bool enable);
|
|
#endif
|
|
|
|
/*!
|
|
* @brief Configures the FlexCAN Legacy Rx FIFO.
|
|
*
|
|
* This function configures the FlexCAN Rx FIFO with given configuration.
|
|
* @note Legacy Rx FIFO only can receive classic CAN message.
|
|
*
|
|
* @param base FlexCAN peripheral base address.
|
|
* @param pRxFifoConfig Pointer to the FlexCAN Legacy Rx FIFO configuration structure. Can be NULL when enable parameter
|
|
* is false.
|
|
* @param enable Enable/disable Legacy Rx FIFO.
|
|
* - true: Enable Legacy Rx FIFO.
|
|
* - false: Disable Legacy Rx FIFO.
|
|
*/
|
|
void FLEXCAN_SetRxFifoConfig(CAN_Type *base, const flexcan_rx_fifo_config_t *pRxFifoConfig, bool enable);
|
|
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_ENHANCED_RX_FIFO) && FSL_FEATURE_FLEXCAN_HAS_ENHANCED_RX_FIFO)
|
|
/*!
|
|
* @brief Configures the FlexCAN Enhanced Rx FIFO.
|
|
*
|
|
* This function configures the Enhanced Rx FIFO with given configuration.
|
|
* @note Enhanced Rx FIFO support receive classic CAN or CAN FD messages, Legacy Rx FIFO and Enhanced Rx FIFO
|
|
* cannot be enabled at the same time.
|
|
*
|
|
* @param base FlexCAN peripheral base address.
|
|
* @param pConfig Pointer to the FlexCAN Enhanced Rx FIFO configuration structure. Can be NULL when enable parameter
|
|
* is false.
|
|
* @param enable Enable/disable Enhanced Rx FIFO.
|
|
* - true: Enable Enhanced Rx FIFO.
|
|
* - false: Disable Enhanced Rx FIFO.
|
|
*/
|
|
void FLEXCAN_SetEnhancedRxFifoConfig(CAN_Type *base, const flexcan_enhanced_rx_fifo_config_t *pConfig, bool enable);
|
|
#endif
|
|
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_PN_MODE) && FSL_FEATURE_FLEXCAN_HAS_PN_MODE)
|
|
/*!
|
|
* @brief Configures the FlexCAN Pretended Networking mode.
|
|
*
|
|
* This function configures the FlexCAN Pretended Networking mode with given configuration.
|
|
*
|
|
* @param base FlexCAN peripheral base address.
|
|
* @param pConfig Pointer to the FlexCAN Rx FIFO configuration structure.
|
|
*/
|
|
void FLEXCAN_SetPNConfig(CAN_Type *base, const flexcan_pn_config_t *pConfig);
|
|
#endif
|
|
/* @} */
|
|
|
|
/*!
|
|
* @name Status
|
|
* @{
|
|
*/
|
|
|
|
/*!
|
|
* @brief Gets the FlexCAN module interrupt flags.
|
|
*
|
|
* This function gets all FlexCAN status flags. The flags are returned as the logical
|
|
* OR value of the enumerators @ref _flexcan_flags. To check the specific status,
|
|
* compare the return value with enumerators in @ref _flexcan_flags.
|
|
*
|
|
* @param base FlexCAN peripheral base address.
|
|
* @return FlexCAN status flags which are ORed by the enumerators in the _flexcan_flags.
|
|
*/
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_PN_MODE) && FSL_FEATURE_FLEXCAN_HAS_PN_MODE) || \
|
|
(defined(FSL_FEATURE_FLEXCAN_HAS_ENHANCED_RX_FIFO) && FSL_FEATURE_FLEXCAN_HAS_ENHANCED_RX_FIFO) || \
|
|
(defined(FSL_FEATURE_FLEXCAN_HAS_MEMORY_ERROR_CONTROL) && FSL_FEATURE_FLEXCAN_HAS_MEMORY_ERROR_CONTROL)
|
|
static inline uint64_t FLEXCAN_GetStatusFlags(CAN_Type *base)
|
|
{
|
|
uint64_t tempflag = (uint64_t)base->ESR1;
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_PN_MODE) && FSL_FEATURE_FLEXCAN_HAS_PN_MODE)
|
|
/* Get PN Wake Up status. */
|
|
tempflag |= FLEXCAN_PN_STATUS_MASK(base->WU_MTC);
|
|
#endif
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_ENHANCED_RX_FIFO) && FSL_FEATURE_FLEXCAN_HAS_ENHANCED_RX_FIFO)
|
|
/* Get Enhanced Rx FIFO status. */
|
|
tempflag |= FLEXCAN_EFIFO_STATUS_MASK(base->ERFSR);
|
|
#endif
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_MEMORY_ERROR_CONTROL) && FSL_FEATURE_FLEXCAN_HAS_MEMORY_ERROR_CONTROL)
|
|
/* Get Memory Error status. */
|
|
tempflag |= FLEXCAN_MECR_STATUS_MASK(base->ERRSR);
|
|
#endif
|
|
return tempflag;
|
|
}
|
|
#else
|
|
static inline uint32_t FLEXCAN_GetStatusFlags(CAN_Type *base)
|
|
{
|
|
return base->ESR1;
|
|
}
|
|
#endif
|
|
/*!
|
|
* @brief Clears status flags with the provided mask.
|
|
*
|
|
* This function clears the FlexCAN status flags with a provided mask. An automatically cleared flag
|
|
* can't be cleared by this function.
|
|
*
|
|
* @param base FlexCAN peripheral base address.
|
|
* @param mask The status flags to be cleared, it is logical OR value of @ref _flexcan_flags.
|
|
*/
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_PN_MODE) && FSL_FEATURE_FLEXCAN_HAS_PN_MODE) || \
|
|
(defined(FSL_FEATURE_FLEXCAN_HAS_ENHANCED_RX_FIFO) && FSL_FEATURE_FLEXCAN_HAS_ENHANCED_RX_FIFO) || \
|
|
(defined(FSL_FEATURE_FLEXCAN_HAS_MEMORY_ERROR_CONTROL) && FSL_FEATURE_FLEXCAN_HAS_MEMORY_ERROR_CONTROL)
|
|
static inline void FLEXCAN_ClearStatusFlags(CAN_Type *base, uint64_t mask)
|
|
{
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_PN_MODE) && FSL_FEATURE_FLEXCAN_HAS_PN_MODE)
|
|
/* Clear PN Wake Up status. */
|
|
base->WU_MTC = FLEXCAN_PN_STATUS_UNMASK(mask);
|
|
#endif
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_ENHANCED_RX_FIFO) && FSL_FEATURE_FLEXCAN_HAS_ENHANCED_RX_FIFO)
|
|
/* Clear Enhanced Rx FIFO status. */
|
|
base->ERFSR |= FLEXCAN_EFIFO_STATUS_UNMASK(mask);
|
|
#endif
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_MEMORY_ERROR_CONTROL) && FSL_FEATURE_FLEXCAN_HAS_MEMORY_ERROR_CONTROL)
|
|
/* Clear Memory Error status. */
|
|
base->ERRSR = FLEXCAN_MECR_STATUS_UNMASK(mask);
|
|
#endif
|
|
base->ESR1 = (uint32_t)(mask & 0xFFFFFFFFU);
|
|
}
|
|
#else
|
|
static inline void FLEXCAN_ClearStatusFlags(CAN_Type *base, uint32_t mask)
|
|
{
|
|
/* Write 1 to clear status flag. */
|
|
base->ESR1 = mask;
|
|
}
|
|
#endif
|
|
/*!
|
|
* @brief Gets the FlexCAN Bus Error Counter value.
|
|
*
|
|
* This function gets the FlexCAN Bus Error Counter value for both Tx and
|
|
* Rx direction. These values may be needed in the upper layer error handling.
|
|
*
|
|
* @param base FlexCAN peripheral base address.
|
|
* @param txErrBuf Buffer to store Tx Error Counter value.
|
|
* @param rxErrBuf Buffer to store Rx Error Counter value.
|
|
*/
|
|
static inline void FLEXCAN_GetBusErrCount(CAN_Type *base, uint8_t *txErrBuf, uint8_t *rxErrBuf)
|
|
{
|
|
if (NULL != txErrBuf)
|
|
{
|
|
*txErrBuf = (uint8_t)((base->ECR & CAN_ECR_TXERRCNT_MASK) >> CAN_ECR_TXERRCNT_SHIFT);
|
|
}
|
|
|
|
if (NULL != rxErrBuf)
|
|
{
|
|
*rxErrBuf = (uint8_t)((base->ECR & CAN_ECR_RXERRCNT_MASK) >> CAN_ECR_RXERRCNT_SHIFT);
|
|
}
|
|
}
|
|
|
|
/*!
|
|
* @brief Gets the FlexCAN Message Buffer interrupt flags.
|
|
*
|
|
* This function gets the interrupt flags of a given Message Buffers.
|
|
*
|
|
* @param base FlexCAN peripheral base address.
|
|
* @param mask The ORed FlexCAN Message Buffer mask.
|
|
* @return The status of given Message Buffers.
|
|
*/
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER)) && (FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER > 0)
|
|
static inline uint64_t FLEXCAN_GetMbStatusFlags(CAN_Type *base, uint64_t mask)
|
|
#else
|
|
static inline uint32_t FLEXCAN_GetMbStatusFlags(CAN_Type *base, uint32_t mask)
|
|
#endif
|
|
{
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER)) && (FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER > 0)
|
|
uint64_t tempflag = (uint64_t)base->IFLAG1;
|
|
return (tempflag | (((uint64_t)base->IFLAG2) << 32)) & mask;
|
|
#else
|
|
return (base->IFLAG1 & mask);
|
|
#endif
|
|
}
|
|
|
|
/*!
|
|
* @brief Clears the FlexCAN Message Buffer interrupt flags.
|
|
*
|
|
* This function clears the interrupt flags of a given Message Buffers.
|
|
*
|
|
* @param base FlexCAN peripheral base address.
|
|
* @param mask The ORed FlexCAN Message Buffer mask.
|
|
*/
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER)) && (FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER > 0)
|
|
static inline void FLEXCAN_ClearMbStatusFlags(CAN_Type *base, uint64_t mask)
|
|
#else
|
|
static inline void FLEXCAN_ClearMbStatusFlags(CAN_Type *base, uint32_t mask)
|
|
#endif
|
|
{
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER)) && (FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER > 0)
|
|
base->IFLAG1 = (uint32_t)(mask & 0xFFFFFFFFU);
|
|
base->IFLAG2 = (uint32_t)(mask >> 32);
|
|
#else
|
|
base->IFLAG1 = mask;
|
|
#endif
|
|
}
|
|
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_MEMORY_ERROR_CONTROL) && FSL_FEATURE_FLEXCAN_HAS_MEMORY_ERROR_CONTROL)
|
|
/*!
|
|
* @brief Gets the FlexCAN Memory Error Report registers status.
|
|
*
|
|
* This function gets the FlexCAN Memory Error Report registers status.
|
|
*
|
|
* @param base FlexCAN peripheral base address.
|
|
* @param errorStatus Pointer to FlexCAN Memory Error Report registers status structure.
|
|
*/
|
|
void FLEXCAN_GetMemoryErrorReportStatus(CAN_Type *base, flexcan_memory_error_report_status_t *errorStatus);
|
|
#endif
|
|
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_PN_MODE) && FSL_FEATURE_FLEXCAN_HAS_PN_MODE)
|
|
/*!
|
|
* @brief Gets the FlexCAN Number of Matches when in Pretended Networking.
|
|
*
|
|
* This function gets the number of times a given message has matched the predefined filtering criteria for ID and/or PL
|
|
* before a wakeup event.
|
|
*
|
|
* @param base FlexCAN peripheral base address.
|
|
* @return The number of received wake up msessages.
|
|
*/
|
|
static inline uint8_t FLEXCAN_GetPNMatchCount(CAN_Type *base)
|
|
{
|
|
return (uint8_t)((base->WU_MTC & CAN_WU_MTC_MCOUNTER_MASK) >> CAN_WU_MTC_MCOUNTER_SHIFT);
|
|
}
|
|
#endif
|
|
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_ENHANCED_RX_FIFO) && FSL_FEATURE_FLEXCAN_HAS_ENHANCED_RX_FIFO)
|
|
/*!
|
|
* @brief Gets the number of FlexCAN Enhanced Rx FIFO available frames.
|
|
*
|
|
* This function gets the number of CAN messages stored in the Enhanced Rx FIFO.
|
|
*
|
|
* @param base FlexCAN peripheral base address.
|
|
* @return The number of available CAN messages stored in the Enhanced Rx FIFO.
|
|
*/
|
|
static inline uint32_t FLEXCAN_GetEnhancedFifoDataCount(CAN_Type *base)
|
|
{
|
|
return (base->ERFSR & CAN_ERFSR_ERFEL_MASK);
|
|
}
|
|
#endif
|
|
/* @} */
|
|
|
|
/*!
|
|
* @name Interrupts
|
|
* @{
|
|
*/
|
|
|
|
/*!
|
|
* @brief Enables FlexCAN interrupts according to the provided mask.
|
|
*
|
|
* This function enables the FlexCAN interrupts according to the provided mask. The mask
|
|
* is a logical OR of enumeration members, see @ref _flexcan_interrupt_enable.
|
|
*
|
|
* @param base FlexCAN peripheral base address.
|
|
* @param mask The interrupts to enable. Logical OR of @ref _flexcan_interrupt_enable.
|
|
*/
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_PN_MODE) && FSL_FEATURE_FLEXCAN_HAS_PN_MODE) || \
|
|
(defined(FSL_FEATURE_FLEXCAN_HAS_ENHANCED_RX_FIFO) && FSL_FEATURE_FLEXCAN_HAS_ENHANCED_RX_FIFO) || \
|
|
(defined(FSL_FEATURE_FLEXCAN_HAS_MEMORY_ERROR_CONTROL) && FSL_FEATURE_FLEXCAN_HAS_MEMORY_ERROR_CONTROL)
|
|
static inline void FLEXCAN_EnableInterrupts(CAN_Type *base, uint64_t mask)
|
|
#else
|
|
static inline void FLEXCAN_EnableInterrupts(CAN_Type *base, uint32_t mask)
|
|
#endif
|
|
{
|
|
/* Solve Self Wake Up interrupt. */
|
|
base->MCR |= (uint32_t)(mask & (uint32_t)kFLEXCAN_WakeUpInterruptEnable);
|
|
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE) && FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE)
|
|
if (0 != FSL_FEATURE_FLEXCAN_INSTANCE_HAS_FLEXIBLE_DATA_RATEn(base))
|
|
{
|
|
/* Solve CAN FD frames data phase error interrupt. */
|
|
base->CTRL2 |= (uint32_t)(mask & (uint32_t)kFLEXCAN_FDErrorInterruptEnable);
|
|
}
|
|
#endif
|
|
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_PN_MODE) && FSL_FEATURE_FLEXCAN_HAS_PN_MODE)
|
|
/* Solve PN Wake Up interrupt. */
|
|
base->CTRL1_PN |= FLEXCAN_PN_INT_UNMASK(mask);
|
|
#endif
|
|
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_ENHANCED_RX_FIFO) && FSL_FEATURE_FLEXCAN_HAS_ENHANCED_RX_FIFO)
|
|
/* Solve Enhanced Rx FIFO interrupt. */
|
|
base->ERFIER |= FLEXCAN_EFIFO_INT_UNMASK(mask);
|
|
#endif
|
|
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_MEMORY_ERROR_CONTROL) && FSL_FEATURE_FLEXCAN_HAS_MEMORY_ERROR_CONTROL)
|
|
/* Solve Memory Error interrupt. */
|
|
base->MECR |= FLEXCAN_MECR_INT_UNMASK(mask);
|
|
#endif
|
|
|
|
/* Solve interrupt enable bits in CTRL1 register. */
|
|
base->CTRL1 |=
|
|
(uint32_t)(mask & ((uint32_t)kFLEXCAN_BusOffInterruptEnable | (uint32_t)kFLEXCAN_ErrorInterruptEnable |
|
|
(uint32_t)kFLEXCAN_RxWarningInterruptEnable | (uint32_t)kFLEXCAN_TxWarningInterruptEnable));
|
|
}
|
|
|
|
/*!
|
|
* @brief Disables FlexCAN interrupts according to the provided mask.
|
|
*
|
|
* This function disables the FlexCAN interrupts according to the provided mask. The mask
|
|
* is a logical OR of enumeration members, see @ref _flexcan_interrupt_enable.
|
|
*
|
|
* @param base FlexCAN peripheral base address.
|
|
* @param mask The interrupts to disable. Logical OR of @ref _flexcan_interrupt_enable.
|
|
*/
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_PN_MODE) && FSL_FEATURE_FLEXCAN_HAS_PN_MODE) || \
|
|
(defined(FSL_FEATURE_FLEXCAN_HAS_MEMORY_ERROR_CONTROL) && FSL_FEATURE_FLEXCAN_HAS_MEMORY_ERROR_CONTROL)
|
|
static inline void FLEXCAN_DisableInterrupts(CAN_Type *base, uint64_t mask)
|
|
#else
|
|
static inline void FLEXCAN_DisableInterrupts(CAN_Type *base, uint32_t mask)
|
|
#endif
|
|
{
|
|
/* Solve Wake Up Interrupt. */
|
|
base->MCR &= ~(uint32_t)(mask & (uint32_t)kFLEXCAN_WakeUpInterruptEnable);
|
|
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE) && FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE)
|
|
if (0 != FSL_FEATURE_FLEXCAN_INSTANCE_HAS_FLEXIBLE_DATA_RATEn(base))
|
|
{
|
|
/* Solve CAN FD frames data phase error interrupt. */
|
|
base->CTRL2 &= ~(uint32_t)(mask & (uint32_t)kFLEXCAN_FDErrorInterruptEnable);
|
|
}
|
|
#endif
|
|
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_PN_MODE) && FSL_FEATURE_FLEXCAN_HAS_PN_MODE)
|
|
/* Solve PN Wake Up Interrupt. */
|
|
base->CTRL1_PN &= ~FLEXCAN_PN_STATUS_UNMASK(mask);
|
|
#endif
|
|
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_ENHANCED_RX_FIFO) && FSL_FEATURE_FLEXCAN_HAS_ENHANCED_RX_FIFO)
|
|
/* Solve Enhanced Rx FIFO interrupt. */
|
|
base->ERFIER &= ~FLEXCAN_EFIFO_INT_UNMASK(mask);
|
|
#endif
|
|
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_MEMORY_ERROR_CONTROL) && FSL_FEATURE_FLEXCAN_HAS_MEMORY_ERROR_CONTROL)
|
|
/* Solve Memory Error Interrupt. */
|
|
base->MECR &= ~FLEXCAN_MECR_STATUS_UNMASK(mask);
|
|
#endif
|
|
|
|
/* Solve interrupt enable bits in CTRL1 register. */
|
|
base->CTRL1 &=
|
|
~(uint32_t)(mask & ((uint32_t)kFLEXCAN_BusOffInterruptEnable | (uint32_t)kFLEXCAN_ErrorInterruptEnable |
|
|
(uint32_t)kFLEXCAN_RxWarningInterruptEnable | (uint32_t)kFLEXCAN_TxWarningInterruptEnable));
|
|
}
|
|
|
|
/*!
|
|
* @brief Enables FlexCAN Message Buffer interrupts.
|
|
*
|
|
* This function enables the interrupts of given Message Buffers.
|
|
*
|
|
* @param base FlexCAN peripheral base address.
|
|
* @param mask The ORed FlexCAN Message Buffer mask.
|
|
*/
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER)) && (FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER > 0)
|
|
static inline void FLEXCAN_EnableMbInterrupts(CAN_Type *base, uint64_t mask)
|
|
#else
|
|
static inline void FLEXCAN_EnableMbInterrupts(CAN_Type *base, uint32_t mask)
|
|
#endif
|
|
{
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER)) && (FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER > 0)
|
|
base->IMASK1 |= (uint32_t)(mask & 0xFFFFFFFFU);
|
|
base->IMASK2 |= (uint32_t)(mask >> 32);
|
|
#else
|
|
base->IMASK1 |= mask;
|
|
#endif
|
|
}
|
|
|
|
/*!
|
|
* @brief Disables FlexCAN Message Buffer interrupts.
|
|
*
|
|
* This function disables the interrupts of given Message Buffers.
|
|
*
|
|
* @param base FlexCAN peripheral base address.
|
|
* @param mask The ORed FlexCAN Message Buffer mask.
|
|
*/
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER)) && (FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER > 0)
|
|
static inline void FLEXCAN_DisableMbInterrupts(CAN_Type *base, uint64_t mask)
|
|
#else
|
|
static inline void FLEXCAN_DisableMbInterrupts(CAN_Type *base, uint32_t mask)
|
|
#endif
|
|
{
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER)) && (FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER > 0)
|
|
base->IMASK1 &= ~((uint32_t)(mask & 0xFFFFFFFFU));
|
|
base->IMASK2 &= ~((uint32_t)(mask >> 32));
|
|
#else
|
|
base->IMASK1 &= ~mask;
|
|
#endif
|
|
}
|
|
|
|
/* @} */
|
|
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_RX_FIFO_DMA) && FSL_FEATURE_FLEXCAN_HAS_RX_FIFO_DMA)
|
|
/*!
|
|
* @name DMA Control
|
|
* @{
|
|
*/
|
|
|
|
/*!
|
|
* @brief Enables or disables the FlexCAN Rx FIFO DMA request.
|
|
*
|
|
* This function enables or disables the DMA feature of FlexCAN build-in Rx FIFO.
|
|
*
|
|
* @param base FlexCAN peripheral base address.
|
|
* @param enable true to enable, false to disable.
|
|
*/
|
|
void FLEXCAN_EnableRxFifoDMA(CAN_Type *base, bool enable);
|
|
|
|
/*!
|
|
* @brief Gets the Rx FIFO Head address.
|
|
*
|
|
* This function returns the FlexCAN Rx FIFO Head address, which is mainly used for the DMA/eDMA use case.
|
|
*
|
|
* @param base FlexCAN peripheral base address.
|
|
* @return FlexCAN Rx FIFO Head address.
|
|
*/
|
|
static inline uintptr_t FLEXCAN_GetRxFifoHeadAddr(CAN_Type *base)
|
|
{
|
|
return (uintptr_t) & (base->MB[0].CS);
|
|
}
|
|
|
|
/* @} */
|
|
#endif /* FSL_FEATURE_FLEXCAN_HAS_RX_FIFO_DMA */
|
|
|
|
/*!
|
|
* @name Bus Operations
|
|
* @{
|
|
*/
|
|
|
|
/*!
|
|
* @brief Enables or disables the FlexCAN module operation.
|
|
*
|
|
* This function enables or disables the FlexCAN module.
|
|
*
|
|
* @param base FlexCAN base pointer.
|
|
* @param enable true to enable, false to disable.
|
|
*/
|
|
static inline void FLEXCAN_Enable(CAN_Type *base, bool enable)
|
|
{
|
|
if (enable)
|
|
{
|
|
base->MCR &= ~CAN_MCR_MDIS_MASK;
|
|
|
|
/* Wait FlexCAN exit from low-power mode. */
|
|
while (0U != (base->MCR & CAN_MCR_LPMACK_MASK))
|
|
{
|
|
}
|
|
}
|
|
else
|
|
{
|
|
base->MCR |= CAN_MCR_MDIS_MASK;
|
|
|
|
/* Wait FlexCAN enter low-power mode. */
|
|
while (0U == (base->MCR & CAN_MCR_LPMACK_MASK))
|
|
{
|
|
}
|
|
}
|
|
}
|
|
|
|
/*!
|
|
* @brief Writes a FlexCAN Message to the Transmit Message Buffer.
|
|
*
|
|
* This function writes a CAN Message to the specified Transmit Message Buffer
|
|
* and changes the Message Buffer state to start CAN Message transmit. After
|
|
* that the function returns immediately.
|
|
*
|
|
* @param base FlexCAN peripheral base address.
|
|
* @param mbIdx The FlexCAN Message Buffer index.
|
|
* @param pTxFrame Pointer to CAN message frame to be sent.
|
|
* @retval kStatus_Success - Write Tx Message Buffer Successfully.
|
|
* @retval kStatus_Fail - Tx Message Buffer is currently in use.
|
|
*/
|
|
status_t FLEXCAN_WriteTxMb(CAN_Type *base, uint8_t mbIdx, const flexcan_frame_t *pTxFrame);
|
|
|
|
/*!
|
|
* @brief Reads a FlexCAN Message from Receive Message Buffer.
|
|
*
|
|
* This function reads a CAN message from a specified Receive Message Buffer.
|
|
* The function fills a receive CAN message frame structure with
|
|
* just received data and activates the Message Buffer again.
|
|
* The function returns immediately.
|
|
*
|
|
* @param base FlexCAN peripheral base address.
|
|
* @param mbIdx The FlexCAN Message Buffer index.
|
|
* @param pRxFrame Pointer to CAN message frame structure for reception.
|
|
* @retval kStatus_Success - Rx Message Buffer is full and has been read successfully.
|
|
* @retval kStatus_FLEXCAN_RxOverflow - Rx Message Buffer is already overflowed and has been read successfully.
|
|
* @retval kStatus_Fail - Rx Message Buffer is empty.
|
|
*/
|
|
status_t FLEXCAN_ReadRxMb(CAN_Type *base, uint8_t mbIdx, flexcan_frame_t *pRxFrame);
|
|
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE) && FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE)
|
|
/*!
|
|
* @brief Writes a FlexCAN FD Message to the Transmit Message Buffer.
|
|
*
|
|
* This function writes a CAN FD Message to the specified Transmit Message Buffer
|
|
* and changes the Message Buffer state to start CAN FD Message transmit. After
|
|
* that the function returns immediately.
|
|
*
|
|
* @param base FlexCAN peripheral base address.
|
|
* @param mbIdx The FlexCAN FD Message Buffer index.
|
|
* @param pTxFrame Pointer to CAN FD message frame to be sent.
|
|
* @retval kStatus_Success - Write Tx Message Buffer Successfully.
|
|
* @retval kStatus_Fail - Tx Message Buffer is currently in use.
|
|
*/
|
|
status_t FLEXCAN_WriteFDTxMb(CAN_Type *base, uint8_t mbIdx, const flexcan_fd_frame_t *pTxFrame);
|
|
|
|
/*!
|
|
* @brief Reads a FlexCAN FD Message from Receive Message Buffer.
|
|
*
|
|
* This function reads a CAN FD message from a specified Receive Message Buffer.
|
|
* The function fills a receive CAN FD message frame structure with
|
|
* just received data and activates the Message Buffer again.
|
|
* The function returns immediately.
|
|
*
|
|
* @param base FlexCAN peripheral base address.
|
|
* @param mbIdx The FlexCAN FD Message Buffer index.
|
|
* @param pRxFrame Pointer to CAN FD message frame structure for reception.
|
|
* @retval kStatus_Success - Rx Message Buffer is full and has been read successfully.
|
|
* @retval kStatus_FLEXCAN_RxOverflow - Rx Message Buffer is already overflowed and has been read successfully.
|
|
* @retval kStatus_Fail - Rx Message Buffer is empty.
|
|
*/
|
|
status_t FLEXCAN_ReadFDRxMb(CAN_Type *base, uint8_t mbIdx, flexcan_fd_frame_t *pRxFrame);
|
|
#endif
|
|
|
|
/*!
|
|
* @brief Reads a FlexCAN Message from Legacy Rx FIFO.
|
|
*
|
|
* This function reads a CAN message from the FlexCAN Legacy Rx FIFO.
|
|
*
|
|
* @param base FlexCAN peripheral base address.
|
|
* @param pRxFrame Pointer to CAN message frame structure for reception.
|
|
* @retval kStatus_Success - Read Message from Rx FIFO successfully.
|
|
* @retval kStatus_Fail - Rx FIFO is not enabled.
|
|
*/
|
|
status_t FLEXCAN_ReadRxFifo(CAN_Type *base, flexcan_frame_t *pRxFrame);
|
|
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_ENHANCED_RX_FIFO) && FSL_FEATURE_FLEXCAN_HAS_ENHANCED_RX_FIFO)
|
|
/*!
|
|
* @brief Reads a FlexCAN Message from Enhanced Rx FIFO.
|
|
*
|
|
* This function reads a CAN or CAN FD message from the FlexCAN Enhanced Rx FIFO.
|
|
*
|
|
* @param base FlexCAN peripheral base address.
|
|
* @param pRxFrame Pointer to CAN FD message frame structure for reception.
|
|
* @retval kStatus_Success - Read Message from Rx FIFO successfully.
|
|
* @retval kStatus_Fail - Rx FIFO is not enabled.
|
|
*/
|
|
status_t FLEXCAN_ReadEnhancedRxFifo(CAN_Type *base, flexcan_fd_frame_t *pRxFrame);
|
|
#endif
|
|
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_PN_MODE) && FSL_FEATURE_FLEXCAN_HAS_PN_MODE)
|
|
/*!
|
|
* @brief Reads a FlexCAN Message from Wake Up MB.
|
|
*
|
|
* This function reads a CAN message from the FlexCAN Wake up Message Buffers. There are four Wake up Message Buffers
|
|
* (WMBs) used to store incoming messages in Pretended Networking mode. The WMB index indicates the arrival order. The
|
|
* last message is stored in WMB3.
|
|
*
|
|
* @param base FlexCAN peripheral base address.
|
|
* @param pRxFrame Pointer to CAN message frame structure for reception.
|
|
* @param mbIdx The FlexCAN Wake up Message Buffer index. Range in 0x0 ~ 0x3.
|
|
* @retval kStatus_Success - Read Message from Wake up Message Buffer successfully.
|
|
* @retval kStatus_Fail - Wake up Message Buffer has no valid content.
|
|
*/
|
|
status_t FLEXCAN_ReadPNWakeUpMB(CAN_Type *base, uint8_t mbIdx, flexcan_frame_t *pRxFrame);
|
|
#endif
|
|
/* @} */
|
|
|
|
/*!
|
|
* @name Transactional
|
|
* @{
|
|
*/
|
|
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE) && FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE)
|
|
/*!
|
|
* @brief Performs a polling send transaction on the CAN bus.
|
|
*
|
|
* @note A transfer handle does not need to be created before calling this API.
|
|
*
|
|
* @param base FlexCAN peripheral base pointer.
|
|
* @param mbIdx The FlexCAN FD Message Buffer index.
|
|
* @param pTxFrame Pointer to CAN FD message frame to be sent.
|
|
* @retval kStatus_Success - Write Tx Message Buffer Successfully.
|
|
* @retval kStatus_Fail - Tx Message Buffer is currently in use.
|
|
*/
|
|
status_t FLEXCAN_TransferFDSendBlocking(CAN_Type *base, uint8_t mbIdx, flexcan_fd_frame_t *pTxFrame);
|
|
|
|
/*!
|
|
* @brief Performs a polling receive transaction on the CAN bus.
|
|
*
|
|
* @note A transfer handle does not need to be created before calling this API.
|
|
*
|
|
* @param base FlexCAN peripheral base pointer.
|
|
* @param mbIdx The FlexCAN FD Message Buffer index.
|
|
* @param pRxFrame Pointer to CAN FD message frame structure for reception.
|
|
* @retval kStatus_Success - Rx Message Buffer is full and has been read successfully.
|
|
* @retval kStatus_FLEXCAN_RxOverflow - Rx Message Buffer is already overflowed and has been read successfully.
|
|
* @retval kStatus_Fail - Rx Message Buffer is empty.
|
|
*/
|
|
status_t FLEXCAN_TransferFDReceiveBlocking(CAN_Type *base, uint8_t mbIdx, flexcan_fd_frame_t *pRxFrame);
|
|
|
|
/*!
|
|
* @brief Sends a message using IRQ.
|
|
*
|
|
* This function sends a message using IRQ. This is a non-blocking function, which returns
|
|
* right away. When messages have been sent out, the send callback function is called.
|
|
*
|
|
* @param base FlexCAN peripheral base address.
|
|
* @param handle FlexCAN handle pointer.
|
|
* @param pMbXfer FlexCAN FD Message Buffer transfer structure. See the #flexcan_mb_transfer_t.
|
|
* @retval kStatus_Success Start Tx Message Buffer sending process successfully.
|
|
* @retval kStatus_Fail Write Tx Message Buffer failed.
|
|
* @retval kStatus_FLEXCAN_TxBusy Tx Message Buffer is in use.
|
|
*/
|
|
status_t FLEXCAN_TransferFDSendNonBlocking(CAN_Type *base, flexcan_handle_t *handle, flexcan_mb_transfer_t *pMbXfer);
|
|
|
|
/*!
|
|
* @brief Receives a message using IRQ.
|
|
*
|
|
* This function receives a message using IRQ. This is non-blocking function, which returns
|
|
* right away. When the message has been received, the receive callback function is called.
|
|
*
|
|
* @param base FlexCAN peripheral base address.
|
|
* @param handle FlexCAN handle pointer.
|
|
* @param pMbXfer FlexCAN FD Message Buffer transfer structure. See the #flexcan_mb_transfer_t.
|
|
* @retval kStatus_Success - Start Rx Message Buffer receiving process successfully.
|
|
* @retval kStatus_FLEXCAN_RxBusy - Rx Message Buffer is in use.
|
|
*/
|
|
status_t FLEXCAN_TransferFDReceiveNonBlocking(CAN_Type *base, flexcan_handle_t *handle, flexcan_mb_transfer_t *pMbXfer);
|
|
|
|
/*!
|
|
* @brief Aborts the interrupt driven message send process.
|
|
*
|
|
* This function aborts the interrupt driven message send process.
|
|
*
|
|
* @param base FlexCAN peripheral base address.
|
|
* @param handle FlexCAN handle pointer.
|
|
* @param mbIdx The FlexCAN FD Message Buffer index.
|
|
*/
|
|
void FLEXCAN_TransferFDAbortSend(CAN_Type *base, flexcan_handle_t *handle, uint8_t mbIdx);
|
|
|
|
/*!
|
|
* @brief Aborts the interrupt driven message receive process.
|
|
*
|
|
* This function aborts the interrupt driven message receive process.
|
|
*
|
|
* @param base FlexCAN peripheral base address.
|
|
* @param handle FlexCAN handle pointer.
|
|
* @param mbIdx The FlexCAN FD Message Buffer index.
|
|
*/
|
|
void FLEXCAN_TransferFDAbortReceive(CAN_Type *base, flexcan_handle_t *handle, uint8_t mbIdx);
|
|
#endif
|
|
|
|
/*!
|
|
* @brief Performs a polling send transaction on the CAN bus.
|
|
*
|
|
* @note A transfer handle does not need to be created before calling this API.
|
|
*
|
|
* @param base FlexCAN peripheral base pointer.
|
|
* @param mbIdx The FlexCAN Message Buffer index.
|
|
* @param pTxFrame Pointer to CAN message frame to be sent.
|
|
* @retval kStatus_Success - Write Tx Message Buffer Successfully.
|
|
* @retval kStatus_Fail - Tx Message Buffer is currently in use.
|
|
*/
|
|
status_t FLEXCAN_TransferSendBlocking(CAN_Type *base, uint8_t mbIdx, flexcan_frame_t *pTxFrame);
|
|
|
|
/*!
|
|
* @brief Performs a polling receive transaction on the CAN bus.
|
|
*
|
|
* @note A transfer handle does not need to be created before calling this API.
|
|
*
|
|
* @param base FlexCAN peripheral base pointer.
|
|
* @param mbIdx The FlexCAN Message Buffer index.
|
|
* @param pRxFrame Pointer to CAN message frame structure for reception.
|
|
* @retval kStatus_Success - Rx Message Buffer is full and has been read successfully.
|
|
* @retval kStatus_FLEXCAN_RxOverflow - Rx Message Buffer is already overflowed and has been read successfully.
|
|
* @retval kStatus_Fail - Rx Message Buffer is empty.
|
|
*/
|
|
status_t FLEXCAN_TransferReceiveBlocking(CAN_Type *base, uint8_t mbIdx, flexcan_frame_t *pRxFrame);
|
|
|
|
/*!
|
|
* @brief Performs a polling receive transaction from Legacy Rx FIFO on the CAN bus.
|
|
*
|
|
* @note A transfer handle does not need to be created before calling this API.
|
|
*
|
|
* @param base FlexCAN peripheral base pointer.
|
|
* @param pRxFrame Pointer to CAN message frame structure for reception.
|
|
* @retval kStatus_Success - Read Message from Rx FIFO successfully.
|
|
* @retval kStatus_Fail - Rx FIFO is not enabled.
|
|
*/
|
|
status_t FLEXCAN_TransferReceiveFifoBlocking(CAN_Type *base, flexcan_frame_t *pRxFrame);
|
|
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_ENHANCED_RX_FIFO) && FSL_FEATURE_FLEXCAN_HAS_ENHANCED_RX_FIFO)
|
|
/*!
|
|
* @brief Performs a polling receive transaction from Enhanced Rx FIFO on the CAN bus.
|
|
*
|
|
* @note A transfer handle does not need to be created before calling this API.
|
|
*
|
|
* @param base FlexCAN peripheral base pointer.
|
|
* @param pRxFrame Pointer to CAN FD message frame structure for reception.
|
|
* @retval kStatus_Success - Read Message from Rx FIFO successfully.
|
|
* @retval kStatus_Fail - Rx FIFO is not enabled.
|
|
*/
|
|
status_t FLEXCAN_TransferReceiveEnhancedFifoBlocking(CAN_Type *base, flexcan_fd_frame_t *pRxFrame);
|
|
#endif
|
|
|
|
/*!
|
|
* @brief Initializes the FlexCAN handle.
|
|
*
|
|
* This function initializes the FlexCAN handle, which can be used for other FlexCAN
|
|
* transactional APIs. Usually, for a specified FlexCAN instance,
|
|
* call this API once to get the initialized handle.
|
|
*
|
|
* @param base FlexCAN peripheral base address.
|
|
* @param handle FlexCAN handle pointer.
|
|
* @param callback The callback function.
|
|
* @param userData The parameter of the callback function.
|
|
*/
|
|
void FLEXCAN_TransferCreateHandle(CAN_Type *base,
|
|
flexcan_handle_t *handle,
|
|
flexcan_transfer_callback_t callback,
|
|
void *userData);
|
|
|
|
/*!
|
|
* @brief Sends a message using IRQ.
|
|
*
|
|
* This function sends a message using IRQ. This is a non-blocking function, which returns
|
|
* right away. When messages have been sent out, the send callback function is called.
|
|
*
|
|
* @param base FlexCAN peripheral base address.
|
|
* @param handle FlexCAN handle pointer.
|
|
* @param pMbXfer FlexCAN Message Buffer transfer structure. See the #flexcan_mb_transfer_t.
|
|
* @retval kStatus_Success Start Tx Message Buffer sending process successfully.
|
|
* @retval kStatus_Fail Write Tx Message Buffer failed.
|
|
* @retval kStatus_FLEXCAN_TxBusy Tx Message Buffer is in use.
|
|
*/
|
|
status_t FLEXCAN_TransferSendNonBlocking(CAN_Type *base, flexcan_handle_t *handle, flexcan_mb_transfer_t *pMbXfer);
|
|
|
|
/*!
|
|
* @brief Receives a message using IRQ.
|
|
*
|
|
* This function receives a message using IRQ. This is non-blocking function, which returns
|
|
* right away. When the message has been received, the receive callback function is called.
|
|
*
|
|
* @param base FlexCAN peripheral base address.
|
|
* @param handle FlexCAN handle pointer.
|
|
* @param pMbXfer FlexCAN Message Buffer transfer structure. See the #flexcan_mb_transfer_t.
|
|
* @retval kStatus_Success - Start Rx Message Buffer receiving process successfully.
|
|
* @retval kStatus_FLEXCAN_RxBusy - Rx Message Buffer is in use.
|
|
*/
|
|
status_t FLEXCAN_TransferReceiveNonBlocking(CAN_Type *base, flexcan_handle_t *handle, flexcan_mb_transfer_t *pMbXfer);
|
|
|
|
/*!
|
|
* @brief Receives a message from Rx FIFO using IRQ.
|
|
*
|
|
* This function receives a message using IRQ. This is a non-blocking function, which returns
|
|
* right away. When all messages have been received, the receive callback function is called.
|
|
*
|
|
* @param base FlexCAN peripheral base address.
|
|
* @param handle FlexCAN handle pointer.
|
|
* @param pFifoXfer FlexCAN Rx FIFO transfer structure. See the @ref flexcan_fifo_transfer_t.
|
|
* @retval kStatus_Success - Start Rx FIFO receiving process successfully.
|
|
* @retval kStatus_FLEXCAN_RxFifoBusy - Rx FIFO is currently in use.
|
|
*/
|
|
status_t FLEXCAN_TransferReceiveFifoNonBlocking(CAN_Type *base,
|
|
flexcan_handle_t *handle,
|
|
flexcan_fifo_transfer_t *pFifoXfer);
|
|
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_ENHANCED_RX_FIFO) && FSL_FEATURE_FLEXCAN_HAS_ENHANCED_RX_FIFO)
|
|
/*!
|
|
* @brief Receives a message from Enhanced Rx FIFO using IRQ.
|
|
*
|
|
* This function receives a message using IRQ. This is a non-blocking function, which returns
|
|
* right away. When all messages have been received, the receive callback function is called.
|
|
*
|
|
* @param base FlexCAN peripheral base address.
|
|
* @param handle FlexCAN handle pointer.
|
|
* @param pFifoXfer FlexCAN Rx FIFO transfer structure. See the ref flexcan_fifo_transfer_t.@
|
|
* @retval kStatus_Success - Start Rx FIFO receiving process successfully.
|
|
* @retval kStatus_FLEXCAN_RxFifoBusy - Rx FIFO is currently in use.
|
|
*/
|
|
status_t FLEXCAN_TransferReceiveEnhancedFifoNonBlocking(CAN_Type *base,
|
|
flexcan_handle_t *handle,
|
|
flexcan_fifo_transfer_t *pFifoXfer);
|
|
|
|
/*!
|
|
* @brief Gets the Enhanced Rx Fifo transfer status during a interrupt non-blocking receive.
|
|
*
|
|
* @param base FlexCAN peripheral base address.
|
|
* @param handle FlexCAN handle pointer.
|
|
* @param count Number of CAN messages receive so far by the non-blocking transaction.
|
|
* @retval kStatus_InvalidArgument count is Invalid.
|
|
* @retval kStatus_Success Successfully return the count.
|
|
*/
|
|
|
|
status_t FLEXCAN_TransferGetReceiveEnhancedFifoCount(CAN_Type *base, flexcan_handle_t *handle, size_t *count);
|
|
#endif
|
|
|
|
/*!
|
|
* @brief Gets the detail index of Mailbox's Timestamp by handle.
|
|
*
|
|
* Then function can only be used when calling non-blocking Data transfer (TX/RX) API,
|
|
* After TX/RX data transfer done (User can get the status by handler's callback function),
|
|
* we can get the detail index of Mailbox's timestamp by handle,
|
|
* Detail non-blocking data transfer API (TX/RX) contain.
|
|
* -FLEXCAN_TransferSendNonBlocking
|
|
* -FLEXCAN_TransferFDSendNonBlocking
|
|
* -FLEXCAN_TransferReceiveNonBlocking
|
|
* -FLEXCAN_TransferFDReceiveNonBlocking
|
|
* -FLEXCAN_TransferReceiveFifoNonBlocking
|
|
*
|
|
* @param handle FlexCAN handle pointer.
|
|
* @param mbIdx The FlexCAN Message Buffer index.
|
|
* @retval the index of mailbox 's timestamp stored in the handle.
|
|
*
|
|
*/
|
|
uint32_t FLEXCAN_GetTimeStamp(flexcan_handle_t *handle, uint8_t mbIdx);
|
|
|
|
/*!
|
|
* @brief Aborts the interrupt driven message send process.
|
|
*
|
|
* This function aborts the interrupt driven message send process.
|
|
*
|
|
* @param base FlexCAN peripheral base address.
|
|
* @param handle FlexCAN handle pointer.
|
|
* @param mbIdx The FlexCAN Message Buffer index.
|
|
*/
|
|
void FLEXCAN_TransferAbortSend(CAN_Type *base, flexcan_handle_t *handle, uint8_t mbIdx);
|
|
|
|
/*!
|
|
* @brief Aborts the interrupt driven message receive process.
|
|
*
|
|
* This function aborts the interrupt driven message receive process.
|
|
*
|
|
* @param base FlexCAN peripheral base address.
|
|
* @param handle FlexCAN handle pointer.
|
|
* @param mbIdx The FlexCAN Message Buffer index.
|
|
*/
|
|
void FLEXCAN_TransferAbortReceive(CAN_Type *base, flexcan_handle_t *handle, uint8_t mbIdx);
|
|
|
|
/*!
|
|
* @brief Aborts the interrupt driven message receive from Rx FIFO process.
|
|
*
|
|
* This function aborts the interrupt driven message receive from Rx FIFO process.
|
|
*
|
|
* @param base FlexCAN peripheral base address.
|
|
* @param handle FlexCAN handle pointer.
|
|
*/
|
|
void FLEXCAN_TransferAbortReceiveFifo(CAN_Type *base, flexcan_handle_t *handle);
|
|
|
|
#if (defined(FSL_FEATURE_FLEXCAN_HAS_ENHANCED_RX_FIFO) && FSL_FEATURE_FLEXCAN_HAS_ENHANCED_RX_FIFO)
|
|
/*!
|
|
* @brief Aborts the interrupt driven message receive from Enhanced Rx FIFO process.
|
|
*
|
|
* This function aborts the interrupt driven message receive from Enhanced Rx FIFO process.
|
|
*
|
|
* @param base FlexCAN peripheral base address.
|
|
* @param handle FlexCAN handle pointer.
|
|
*/
|
|
void FLEXCAN_TransferAbortReceiveEnhancedFifo(CAN_Type *base, flexcan_handle_t *handle);
|
|
#endif
|
|
|
|
/*!
|
|
* @brief FlexCAN IRQ handle function.
|
|
*
|
|
* This function handles the FlexCAN Error, the Message Buffer, and the Rx FIFO IRQ request.
|
|
*
|
|
* @param base FlexCAN peripheral base address.
|
|
* @param handle FlexCAN handle pointer.
|
|
*/
|
|
void FLEXCAN_TransferHandleIRQ(CAN_Type *base, flexcan_handle_t *handle);
|
|
|
|
/* @} */
|
|
|
|
#if defined(__cplusplus)
|
|
}
|
|
#endif
|
|
|
|
/*! @}*/
|
|
|
|
#endif /* _FSL_FLEXCAN_H_ */
|