rt-thread/bsp/imxrt/libraries/MIMXRT1170/MIMXRT1176/drivers/fsl_cdog.h

326 lines
7.8 KiB
C

/*
* Copyright 2020 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef _FSL_CDOG_H_
#define _FSL_CDOG_H_
#include "fsl_common.h"
/*!
* @addtogroup CDOG
* @{
*/
/*! @file */
/*******************************************************************************
* Definitions
*******************************************************************************/
/*! @name Driver version */
/*@{*/
/*! @brief Defines CDOG driver version 2.1.1.
*
* Change log:
* - Version 2.1.1
* - Remove bit CONTROL[CONTROL_CTRL]
* - Version 2.1.0
* - Rename CWT to CDOG
* - Version 2.0.2
* - Fix MISRA-2012 issues
* - Version 2.0.1
* - Fix doxygen issues
* - Version 2.0.0
* - initial version
*/
#define FSL_CDOG_DRIVER_VERSION (MAKE_VERSION(2, 1, 1))
/*@}*/
typedef struct
{
uint8_t lock : 2;
uint8_t timeout : 3;
uint8_t miscompare : 3;
uint8_t sequence : 3;
uint8_t state : 3;
uint8_t address : 3;
uint8_t reserved : 8;
uint8_t irq_pause : 2;
uint8_t debug_halt : 2;
} cdog_config_t;
enum __cdog_debug_Action_ctrl_enum
{
kCDOG_DebugHaltCtrl_Run = 0x1,
kCDOG_DebugHaltCtrl_Pause = 0x2,
};
enum __cdog_irq_pause_ctrl_enum
{
kCDOG_IrqPauseCtrl_Run = 0x1,
kCDOG_IrqPauseCtrl_Pause = 0x2,
};
enum __cdog_fault_ctrl_enum
{
kCDOG_FaultCtrl_EnableReset = 0x1U,
kCDOG_FaultCtrl_EnableInterrupt = 0x2U,
kCDOG_FaultCtrl_NoAction = 0x4U,
};
enum __code_lock_ctrl_enum
{
kCDOG_LockCtrl_Lock = 0x1,
kCDOG_LockCtrl_Unlock = 0x2,
};
typedef uint32_t secure_counter_t;
#define SC_ADD(add) \
do \
{ \
CDOG->ADD = (secure_counter_t)(add); \
} while (0)
#define SC_ADD1 \
do \
{ \
CDOG->ADD1 = (secure_counter_t)0x1U; \
} while (0)
#define SC_ADD16 \
do \
{ \
CDOG->ADD16 = (secure_counter_t)0x1U; \
} while (0)
#define SC_ADD256 \
do \
{ \
CDOG->ADD256 = (secure_counter_t)0x1U; \
} while (0)
#define SC_SUB(sub) \
do \
{ \
CDOG->SUB = (secure_counter_t)(sub); \
} while (0)
#define SC_SUB1 \
do \
{ \
CDOG->SUB1 = (secure_counter_t)0x1U; \
} while (0)
#define SC_SUB16 \
do \
{ \
CDOG->SUB16 = (secure_counter_t)0x1U; \
} while (0)
#define SC_SUB256 \
do \
{ \
CDOG->SUB256 = (secure_counter_t)0x1U; \
} while (0)
#define SC_CHECK(val) \
do \
{ \
CDOG->RESTART = (secure_counter_t)val; \
} while (0)
/*******************************************************************************
* API
*******************************************************************************/
extern void CDOG_DriverIRQHandler(void);
#if defined(__cplusplus)
extern "C" {
#endif /* __cplusplus */
/*!
* @name CDOG Functional Operation
* @{
*/
/*!
* @brief Initialize CDOG
*
* This function initializes CDOG block and setting.
*
* @param base CDOG peripheral base address
* @param conf CDOG configuration structure
* @return Status of the init operation
*/
status_t CDOG_Init(CDOG_Type *base, cdog_config_t *conf);
/*!
* @brief Deinitialize CDOG
*
* This function deinitializes CDOG secure counter.
*
* @param base CDOG peripheral base address
*/
void CDOG_Deinit(CDOG_Type *base);
/*!
* @brief Sets the default configuration of CDOG
*
* This function initialize CDOG config structure to default values.
*
* @param conf CDOG configuration structure
*/
void CDOG_GetDefaultConfig(cdog_config_t *conf);
/*!
* @brief Stops secure counter and instruction timer
*
* This function stops instruction timer and secure counter.
* This also change state od CDOG to IDLE.
*
* @param base CDOG peripheral base address
* @param stop expected value which will be compared with value of secure counter
*/
void CDOG_Stop(CDOG_Type *base, uint32_t stop);
/*!
* @brief Sets secure counter and instruction timer values
*
* This function sets value in RELOAD and START registers
* for instruction timer and secure counter
*
* @param base CDOG peripheral base address
* @param reload reload value
* @param start start value
*/
void CDOG_Start(CDOG_Type *base, uint32_t reload, uint32_t start);
/*!
* @brief Checks secure counter.
*
* This function compares stop value in handler with secure counter value
* by writting to RELOAD refister.
*
* @param base CDOG peripheral base address
* @param check expected (stop) value
*/
void CDOG_Check(CDOG_Type *base, uint32_t check);
/*!
* @brief Sets secure counter and instruction timer values
*
* This function sets value in STOP, RELOAD and START registers
* for instruction timer and secure counter.
*
* @param base CDOG peripheral base address
* @param stop expected value which will be compared with value of secure counter
* @param reload reload value for instruction timer
* @param start start value for secure timer
*/
void CDOG_Set(CDOG_Type *base, uint32_t stop, uint32_t reload, uint32_t start);
/*!
* @brief Add value to secure counter
*
* This function add specified value to secure counter.
*
* @param base CDOG peripheral base address.
* @param add Value to be added.
*/
void CDOG_Add(CDOG_Type *base, uint32_t add);
/*!
* @brief Add 1 to secure counter
*
* This function add 1 to secure counter.
*
* @param base CDOG peripheral base address.
*/
void CDOG_Add1(CDOG_Type *base);
/*!
* @brief Add 16 to secure counter
*
* This function add 16 to secure counter.
*
* @param base CDOG peripheral base address.
*/
void CDOG_Add16(CDOG_Type *base);
/*!
* @brief Add 256 to secure counter
*
* This function add 256 to secure counter.
*
* @param base CDOG peripheral base address.
*/
void CDOG_Add256(CDOG_Type *base);
/*!
* brief Substract value to secure counter
*
* This function substract specified value to secure counter.
*
* param base CDOG peripheral base address.
* param sub Value to be substracted.
*/
void CDOG_Sub(CDOG_Type *base, uint32_t sub);
/*!
* @brief Substract 1 from secure counter
*
* This function substract specified 1 from secure counter.
*
* @param base CDOG peripheral base address.
*/
void CDOG_Sub1(CDOG_Type *base);
/*!
* @brief Substract 16 from secure counter
*
* This function substract specified 16 from secure counter.
*
* @param base CDOG peripheral base address.
*/
void CDOG_Sub16(CDOG_Type *base);
/*!
* @brief Substract 256 from secure counter
*
* This function substract specified 256 from secure counter.
*
* @param base CDOG peripheral base address.
*/
void CDOG_Sub256(CDOG_Type *base);
/*!
* @brief Set the CDOG persistent word.
*
* @param base CDOG peripheral base address.
* @param value The value to be written.
*/
void CDOG_WritePersistent(CDOG_Type *base, uint32_t value);
/*!
* @brief Get the CDOG persistent word.
*
* @param base CDOG peripheral base address.
* @return The persistent word.
*/
uint32_t CDOG_ReadPersistent(CDOG_Type *base);
/*! @}*/
#if defined(__cplusplus)
}
#endif /* __cplusplus */
/*! @}*/ /* end of group cdog */
#endif /* _FSL_CDOG_H_ */