551 lines
17 KiB
C
551 lines
17 KiB
C
/*
|
|
* Copyright (c) 2006-2018, RT-Thread Development Team
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*
|
|
* Change Logs:
|
|
* Date Author Notes
|
|
* 2017-10-10 Tanek first version
|
|
*/
|
|
|
|
#include <rtthread.h>
|
|
#include <rthw.h>
|
|
#include <drivers/mmcsd_core.h>
|
|
|
|
#include <board.h>
|
|
#include <fsl_usdhc.h>
|
|
#include <fsl_gpio.h>
|
|
|
|
#include <finsh.h>
|
|
|
|
#define RT_USING_SDIO1
|
|
#define RT_USING_SDIO2
|
|
|
|
//#define DEBUG
|
|
|
|
#ifdef DEBUG
|
|
static int enable_log = 1;
|
|
|
|
#define MMCSD_DGB(fmt, ...) \
|
|
do \
|
|
{ \
|
|
if (enable_log) \
|
|
{ \
|
|
rt_kprintf(fmt, ##__VA_ARGS__); \
|
|
} \
|
|
} while (0)
|
|
#else
|
|
#define MMCSD_DGB(fmt, ...)
|
|
#endif
|
|
|
|
#define CACHE_LINESIZE (32)
|
|
|
|
#define USDHC_ADMA_TABLE_WORDS (8U) /* define the ADMA descriptor table length */
|
|
#define USDHC_ADMA2_ADDR_ALIGN (4U) /* define the ADMA2 descriptor table addr align size */
|
|
#define IMXRT_MAX_FREQ (25UL * 1000UL * 1000UL)
|
|
|
|
#define USDHC_ADMA_TABLE_WORDS (8U) /* define the ADMA descriptor table length */
|
|
#define USDHC_ADMA2_ADDR_ALIGN (4U) /* define the ADMA2 descriptor table addr align size */
|
|
#define USDHC_READ_BURST_LEN (8U) /*!< number of words USDHC read in a single burst */
|
|
#define USDHC_WRITE_BURST_LEN (8U) /*!< number of words USDHC write in a single burst */
|
|
#define USDHC_DATA_TIMEOUT (0xFU) /*!< data timeout counter value */
|
|
|
|
/* Read/write watermark level. The bigger value indicates DMA has higher read/write performance. */
|
|
#define USDHC_READ_WATERMARK_LEVEL (0x80U)
|
|
#define USDHC_WRITE_WATERMARK_LEVEL (0x80U)
|
|
|
|
/* DMA mode */
|
|
#define USDHC_DMA_MODE kUSDHC_DmaModeAdma2
|
|
|
|
/* Endian mode. */
|
|
#define USDHC_ENDIAN_MODE kUSDHC_EndianModeLittle
|
|
|
|
ALIGN(USDHC_ADMA2_ADDR_ALIGN) uint32_t g_usdhcAdma2Table[USDHC_ADMA_TABLE_WORDS] SECTION("NonCacheable");
|
|
|
|
struct imxrt_mmcsd
|
|
{
|
|
struct rt_mmcsd_host *host;
|
|
struct rt_mmcsd_req *req;
|
|
struct rt_mmcsd_cmd *cmd;
|
|
|
|
struct rt_timer timer;
|
|
|
|
rt_uint32_t *buf;
|
|
|
|
//USDHC_Type *base;
|
|
usdhc_host_t usdhc_host;
|
|
clock_div_t usdhc_div;
|
|
clock_ip_name_t ip_clock;
|
|
|
|
uint32_t *usdhc_adma2_table;
|
|
};
|
|
|
|
static void _mmcsd_gpio_init(struct imxrt_mmcsd *mmcsd)
|
|
{
|
|
gpio_pin_config_t sw_config;
|
|
|
|
CLOCK_EnableClock(kCLOCK_Iomuxc); /* iomuxc clock (iomuxc_clk_enable): 0x03u */
|
|
|
|
#ifdef RT_USING_SDIO1
|
|
if (mmcsd->usdhc_host.base == USDHC1)
|
|
{
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_00_USDHC1_CMD, 0);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_01_USDHC1_CLK, 0);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_02_USDHC1_DATA0, 0);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_03_USDHC1_DATA1, 0);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_04_USDHC1_DATA2, 0);
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_05_USDHC1_DATA3, 0);
|
|
|
|
/* voltage select PIN */
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B1_14_USDHC1_VSELECT, 0);
|
|
|
|
/* card detect PIN */
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B1_12_GPIO2_IO28, 0);
|
|
/* power reset pin */
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_05_GPIO1_IO05, 0);
|
|
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_SD_B0_00_USDHC1_CMD, IOMUXC_SW_PAD_CTL_PAD_SRE_MASK | IOMUXC_SW_PAD_CTL_PAD_PKE_MASK |
|
|
IOMUXC_SW_PAD_CTL_PAD_PUE_MASK | IOMUXC_SW_PAD_CTL_PAD_HYS_MASK |
|
|
IOMUXC_SW_PAD_CTL_PAD_SPEED(2) | IOMUXC_SW_PAD_CTL_PAD_PUS(1) |
|
|
IOMUXC_SW_PAD_CTL_PAD_DSE(1));
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_SD_B0_01_USDHC1_CLK, IOMUXC_SW_PAD_CTL_PAD_SRE_MASK | IOMUXC_SW_PAD_CTL_PAD_HYS_MASK |
|
|
IOMUXC_SW_PAD_CTL_PAD_SPEED(1) | IOMUXC_SW_PAD_CTL_PAD_PUS(1) |
|
|
IOMUXC_SW_PAD_CTL_PAD_DSE(1));
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_SD_B0_02_USDHC1_DATA0, IOMUXC_SW_PAD_CTL_PAD_SRE_MASK | IOMUXC_SW_PAD_CTL_PAD_PKE_MASK |
|
|
IOMUXC_SW_PAD_CTL_PAD_PUE_MASK |
|
|
IOMUXC_SW_PAD_CTL_PAD_HYS_MASK |
|
|
IOMUXC_SW_PAD_CTL_PAD_SPEED(2) |
|
|
IOMUXC_SW_PAD_CTL_PAD_PUS(1) | IOMUXC_SW_PAD_CTL_PAD_DSE(1));
|
|
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_SD_B0_03_USDHC1_DATA1, IOMUXC_SW_PAD_CTL_PAD_SRE_MASK | IOMUXC_SW_PAD_CTL_PAD_PKE_MASK |
|
|
IOMUXC_SW_PAD_CTL_PAD_PUE_MASK |
|
|
IOMUXC_SW_PAD_CTL_PAD_HYS_MASK |
|
|
IOMUXC_SW_PAD_CTL_PAD_SPEED(2) |
|
|
IOMUXC_SW_PAD_CTL_PAD_PUS(1) | IOMUXC_SW_PAD_CTL_PAD_DSE(1));
|
|
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_SD_B0_04_USDHC1_DATA2, IOMUXC_SW_PAD_CTL_PAD_SRE_MASK | IOMUXC_SW_PAD_CTL_PAD_PKE_MASK |
|
|
IOMUXC_SW_PAD_CTL_PAD_PUE_MASK |
|
|
IOMUXC_SW_PAD_CTL_PAD_HYS_MASK |
|
|
IOMUXC_SW_PAD_CTL_PAD_SPEED(2) |
|
|
IOMUXC_SW_PAD_CTL_PAD_PUS(1) | IOMUXC_SW_PAD_CTL_PAD_DSE(1));
|
|
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_SD_B0_05_USDHC1_DATA3, IOMUXC_SW_PAD_CTL_PAD_SRE_MASK | IOMUXC_SW_PAD_CTL_PAD_PKE_MASK |
|
|
IOMUXC_SW_PAD_CTL_PAD_PUE_MASK |
|
|
IOMUXC_SW_PAD_CTL_PAD_HYS_MASK |
|
|
IOMUXC_SW_PAD_CTL_PAD_SPEED(2) |
|
|
IOMUXC_SW_PAD_CTL_PAD_PUS(1) | IOMUXC_SW_PAD_CTL_PAD_DSE(1));
|
|
|
|
/*voltage select pin*/
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_B1_14_USDHC1_VSELECT, IOMUXC_SW_PAD_CTL_PAD_SRE_MASK | IOMUXC_SW_PAD_CTL_PAD_PKE_MASK |
|
|
IOMUXC_SW_PAD_CTL_PAD_PUE_MASK |
|
|
IOMUXC_SW_PAD_CTL_PAD_HYS_MASK |
|
|
IOMUXC_SW_PAD_CTL_PAD_SPEED(2) |
|
|
IOMUXC_SW_PAD_CTL_PAD_PUS(1) | IOMUXC_SW_PAD_CTL_PAD_DSE(4));
|
|
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_B1_12_GPIO2_IO28, IOMUXC_SW_PAD_CTL_PAD_SRE_MASK | IOMUXC_SW_PAD_CTL_PAD_PKE_MASK |
|
|
IOMUXC_SW_PAD_CTL_PAD_PUE_MASK |
|
|
IOMUXC_SW_PAD_CTL_PAD_HYS_MASK |
|
|
IOMUXC_SW_PAD_CTL_PAD_SPEED(2) |
|
|
IOMUXC_SW_PAD_CTL_PAD_PUS(1) | IOMUXC_SW_PAD_CTL_PAD_DSE(1));
|
|
|
|
sw_config.direction = kGPIO_DigitalOutput;
|
|
sw_config.outputLogic = 0;
|
|
sw_config.interruptMode = kGPIO_NoIntmode;
|
|
|
|
GPIO_PinInit(GPIO1, 5U, &sw_config);
|
|
GPIO_PinWrite(GPIO1, 5U, true);
|
|
}
|
|
else
|
|
#endif
|
|
|
|
#ifdef RT_USING_SDIO2
|
|
if (mmcsd->usdhc_host.base == USDHC2)
|
|
{
|
|
// todo
|
|
}
|
|
#endif
|
|
|
|
}
|
|
|
|
static void SDMMCHOST_ErrorRecovery(USDHC_Type *base)
|
|
{
|
|
uint32_t status = 0U;
|
|
/* get host present status */
|
|
status = USDHC_GetPresentStatusFlags(base);
|
|
/* check command inhibit status flag */
|
|
if ((status & kUSDHC_CommandInhibitFlag) != 0U)
|
|
{
|
|
/* reset command line */
|
|
USDHC_Reset(base, kUSDHC_ResetCommand, 1000U);
|
|
}
|
|
/* check data inhibit status flag */
|
|
if ((status & kUSDHC_DataInhibitFlag) != 0U)
|
|
{
|
|
/* reset data line */
|
|
USDHC_Reset(base, kUSDHC_ResetData, 1000U);
|
|
}
|
|
}
|
|
|
|
static void _mmcsd_host_init(struct imxrt_mmcsd *mmcsd)
|
|
{
|
|
usdhc_host_t *usdhc_host = &mmcsd->usdhc_host;
|
|
|
|
/* Initializes SDHC. */
|
|
usdhc_host->config.dataTimeout = USDHC_DATA_TIMEOUT;
|
|
usdhc_host->config.endianMode = USDHC_ENDIAN_MODE;
|
|
usdhc_host->config.readWatermarkLevel = USDHC_READ_WATERMARK_LEVEL;
|
|
usdhc_host->config.writeWatermarkLevel = USDHC_WRITE_WATERMARK_LEVEL;
|
|
usdhc_host->config.readBurstLen = USDHC_READ_BURST_LEN;
|
|
usdhc_host->config.writeBurstLen = USDHC_WRITE_BURST_LEN;
|
|
|
|
USDHC_Init(usdhc_host->base, &(usdhc_host->config));
|
|
}
|
|
|
|
static void _mmcsd_clk_init(struct imxrt_mmcsd *mmcsd)
|
|
{
|
|
CLOCK_EnableClock(mmcsd->ip_clock);
|
|
CLOCK_SetDiv(mmcsd->usdhc_div, 5U);
|
|
}
|
|
|
|
static void _mmcsd_isr_init(struct imxrt_mmcsd *mmcsd)
|
|
{
|
|
//NVIC_SetPriority(USDHC1_IRQn, 5U);
|
|
}
|
|
|
|
static void _mmc_request(struct rt_mmcsd_host *host, struct rt_mmcsd_req *req)
|
|
{
|
|
struct imxrt_mmcsd *mmcsd;
|
|
struct rt_mmcsd_cmd *cmd;
|
|
struct rt_mmcsd_data *data;
|
|
status_t error;
|
|
usdhc_adma_config_t dmaConfig;
|
|
usdhc_transfer_t fsl_content = {0};
|
|
usdhc_command_t fsl_command = {0};
|
|
usdhc_data_t fsl_data = {0};
|
|
rt_uint32_t *buf = NULL;
|
|
|
|
RT_ASSERT(host != RT_NULL);
|
|
RT_ASSERT(req != RT_NULL);
|
|
|
|
mmcsd = (struct imxrt_mmcsd *)host->private_data;
|
|
RT_ASSERT(mmcsd != RT_NULL);
|
|
|
|
cmd = req->cmd;
|
|
RT_ASSERT(cmd != RT_NULL);
|
|
|
|
MMCSD_DGB("\tcmd->cmd_code: %02d, cmd->arg: %08x, cmd->flags: %08x --> ", cmd->cmd_code, cmd->arg, cmd->flags);
|
|
|
|
data = cmd->data;
|
|
|
|
memset(&dmaConfig, 0, sizeof(usdhc_adma_config_t));
|
|
/* config adma */
|
|
dmaConfig.dmaMode = USDHC_DMA_MODE;
|
|
dmaConfig.burstLen = kUSDHC_EnBurstLenForINCR;
|
|
dmaConfig.admaTable = mmcsd->usdhc_adma2_table;
|
|
dmaConfig.admaTableWords = USDHC_ADMA_TABLE_WORDS;
|
|
|
|
fsl_command.index = cmd->cmd_code;
|
|
fsl_command.argument = cmd->arg;
|
|
|
|
if (cmd->cmd_code == STOP_TRANSMISSION)
|
|
fsl_command.type = kCARD_CommandTypeAbort;
|
|
else
|
|
fsl_command.type = kCARD_CommandTypeNormal;
|
|
|
|
switch (cmd->flags & RESP_MASK)
|
|
{
|
|
case RESP_NONE:
|
|
fsl_command.responseType = kCARD_ResponseTypeNone;
|
|
break;
|
|
case RESP_R1:
|
|
fsl_command.responseType = kCARD_ResponseTypeR1;
|
|
break;
|
|
case RESP_R1B:
|
|
fsl_command.responseType = kCARD_ResponseTypeR1b;
|
|
break;
|
|
case RESP_R2:
|
|
fsl_command.responseType = kCARD_ResponseTypeR2;
|
|
break;
|
|
case RESP_R3:
|
|
fsl_command.responseType = kCARD_ResponseTypeR3;
|
|
break;
|
|
case RESP_R4:
|
|
fsl_command.responseType = kCARD_ResponseTypeR4;
|
|
break;
|
|
case RESP_R6:
|
|
fsl_command.responseType = kCARD_ResponseTypeR6;
|
|
break;
|
|
case RESP_R7:
|
|
fsl_command.responseType = kCARD_ResponseTypeR7;
|
|
break;
|
|
case RESP_R5:
|
|
fsl_command.responseType = kCARD_ResponseTypeR5;
|
|
break;
|
|
/*
|
|
case RESP_R5B:
|
|
fsl_command.responseType = kCARD_ResponseTypeR5b;
|
|
break;
|
|
*/
|
|
default:
|
|
RT_ASSERT(NULL);
|
|
}
|
|
|
|
// command type
|
|
/*
|
|
switch (cmd->flags & CMD_MASK)
|
|
{
|
|
case CMD_AC:
|
|
break;
|
|
case CMD_ADTC:
|
|
break;
|
|
case CMD_BC:
|
|
break;
|
|
case CMD_BCR:
|
|
break;
|
|
}
|
|
*/
|
|
|
|
fsl_command.flags = 0;
|
|
//fsl_command.response
|
|
//fsl_command.responseErrorFlags
|
|
|
|
fsl_content.command = &fsl_command;
|
|
|
|
if (data)
|
|
{
|
|
if (req->stop != NULL)
|
|
fsl_data.enableAutoCommand12 = true;
|
|
else
|
|
fsl_data.enableAutoCommand12 = false;
|
|
|
|
fsl_data.enableAutoCommand23 = false;
|
|
|
|
fsl_data.enableIgnoreError = false;
|
|
fsl_data.dataType = kUSDHC_TransferDataNormal; //todo : update data type
|
|
fsl_data.blockSize = data->blksize;
|
|
fsl_data.blockCount = data->blks;
|
|
|
|
MMCSD_DGB(" blksize:%d, blks:%d ", fsl_data.blockSize, fsl_data.blockCount);
|
|
|
|
if (((rt_uint32_t)data->buf & (CACHE_LINESIZE - 1)) || // align cache(32byte)
|
|
((rt_uint32_t)data->buf > 0x00000000 && (rt_uint32_t)data->buf < 0x00080000) /*|| // ITCM
|
|
((rt_uint32_t)data->buf >= 0x20000000 && (rt_uint32_t)data->buf < 0x20080000)*/) // DTCM
|
|
{
|
|
|
|
buf = rt_malloc_align(fsl_data.blockSize * fsl_data.blockCount, CACHE_LINESIZE);
|
|
RT_ASSERT(buf != RT_NULL);
|
|
|
|
MMCSD_DGB(" malloc buf: %p, data->buf:%p, %d ", buf, data->buf, fsl_data.blockSize * fsl_data.blockCount);
|
|
}
|
|
|
|
|
|
if ((cmd->cmd_code == WRITE_BLOCK) || (cmd->cmd_code == WRITE_MULTIPLE_BLOCK))
|
|
{
|
|
if (buf)
|
|
{
|
|
MMCSD_DGB(" write(data->buf to buf) ");
|
|
rt_memcpy(buf, data->buf, fsl_data.blockSize * fsl_data.blockCount);
|
|
fsl_data.txData = (uint32_t const *)buf;
|
|
}
|
|
else
|
|
{
|
|
fsl_data.txData = (uint32_t const *)data->buf;
|
|
}
|
|
|
|
fsl_data.rxData = NULL;
|
|
}
|
|
else
|
|
{
|
|
if (buf)
|
|
{
|
|
fsl_data.rxData = (uint32_t *)buf;
|
|
}
|
|
else
|
|
{
|
|
fsl_data.rxData = (uint32_t *)data->buf;
|
|
}
|
|
|
|
fsl_data.txData = NULL;
|
|
}
|
|
|
|
fsl_content.data = &fsl_data;
|
|
}
|
|
else
|
|
{
|
|
fsl_content.data = NULL;
|
|
}
|
|
|
|
error = USDHC_TransferBlocking(mmcsd->usdhc_host.base, &dmaConfig, &fsl_content);
|
|
if (error == kStatus_Fail)
|
|
{
|
|
SDMMCHOST_ErrorRecovery(mmcsd->usdhc_host.base);
|
|
MMCSD_DGB(" ***USDHC_TransferBlocking error: %d*** --> \n", error);
|
|
cmd->err = -RT_ERROR;
|
|
}
|
|
|
|
if (buf)
|
|
{
|
|
if (fsl_data.rxData)
|
|
{
|
|
MMCSD_DGB("read copy buf to data->buf ");
|
|
rt_memcpy(data->buf, buf, fsl_data.blockSize * fsl_data.blockCount);
|
|
}
|
|
|
|
rt_free_align(buf);
|
|
}
|
|
|
|
if ((cmd->flags & RESP_MASK) == RESP_R2)
|
|
{
|
|
cmd->resp[3] = fsl_command.response[0];
|
|
cmd->resp[2] = fsl_command.response[1];
|
|
cmd->resp[1] = fsl_command.response[2];
|
|
cmd->resp[0] = fsl_command.response[3];
|
|
MMCSD_DGB(" resp 0x%08X 0x%08X 0x%08X 0x%08X\n",
|
|
cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3]);
|
|
}
|
|
else
|
|
{
|
|
cmd->resp[0] = fsl_command.response[0];
|
|
MMCSD_DGB(" resp 0x%08X\n", cmd->resp[0]);
|
|
}
|
|
|
|
mmcsd_req_complete(host);
|
|
|
|
return;
|
|
}
|
|
|
|
static void _mmc_set_iocfg(struct rt_mmcsd_host *host, struct rt_mmcsd_io_cfg *io_cfg)
|
|
{
|
|
|
|
struct imxrt_mmcsd *mmcsd;
|
|
unsigned int usdhc_clk;
|
|
unsigned int bus_width;
|
|
uint32_t src_clk;
|
|
|
|
RT_ASSERT(host != RT_NULL);
|
|
RT_ASSERT(host->private_data != RT_NULL);
|
|
RT_ASSERT(io_cfg != RT_NULL);
|
|
|
|
mmcsd = (struct imxrt_mmcsd *)host->private_data;
|
|
usdhc_clk = io_cfg->clock;
|
|
bus_width = io_cfg->bus_width;
|
|
|
|
if (usdhc_clk > IMXRT_MAX_FREQ)
|
|
usdhc_clk = IMXRT_MAX_FREQ;
|
|
src_clk = (CLOCK_GetSysPfdFreq(kCLOCK_Pfd2) / (CLOCK_GetDiv(mmcsd->usdhc_div) + 1U));
|
|
|
|
MMCSD_DGB("\tsrc_clk: %d, usdhc_clk: %d, bus_width: %d\n", src_clk, usdhc_clk, bus_width);
|
|
|
|
if (usdhc_clk)
|
|
{
|
|
USDHC_SetSdClock(mmcsd->usdhc_host.base, src_clk, usdhc_clk);
|
|
//CLOCK_EnableClock(mmcsd->ip_clock);
|
|
|
|
/* Change bus width */
|
|
if (bus_width == MMCSD_BUS_WIDTH_8)
|
|
USDHC_SetDataBusWidth(mmcsd->usdhc_host.base, kUSDHC_DataBusWidth8Bit);
|
|
else if (bus_width == MMCSD_BUS_WIDTH_4)
|
|
USDHC_SetDataBusWidth(mmcsd->usdhc_host.base, kUSDHC_DataBusWidth4Bit);
|
|
else if (bus_width == MMCSD_BUS_WIDTH_1)
|
|
USDHC_SetDataBusWidth(mmcsd->usdhc_host.base, kUSDHC_DataBusWidth1Bit);
|
|
else
|
|
RT_ASSERT(RT_NULL);
|
|
}
|
|
else
|
|
{
|
|
//CLOCK_DisableClock(mmcsd->ip_clock);
|
|
}
|
|
|
|
}
|
|
|
|
#ifdef DEBUG
|
|
static void log_toggle(int en)
|
|
{
|
|
enable_log = en;
|
|
}
|
|
FINSH_FUNCTION_EXPORT(log_toggle, toglle log dumple);
|
|
#endif
|
|
|
|
//static rt_int32_t _mmc_get_card_status(struct rt_mmcsd_host *host)
|
|
//{
|
|
// MMCSD_DGB("%s, start\n", __func__);
|
|
// MMCSD_DGB("%s, end\n", __func__);
|
|
//
|
|
// return 0;
|
|
//}
|
|
//
|
|
//static void _mmc_enable_sdio_irq(struct rt_mmcsd_host *host, rt_int32_t enable)
|
|
//{
|
|
//
|
|
//}
|
|
|
|
static const struct rt_mmcsd_host_ops ops =
|
|
{
|
|
_mmc_request,
|
|
_mmc_set_iocfg,
|
|
RT_NULL,//_mmc_get_card_status,
|
|
RT_NULL,//_mmc_enable_sdio_irq,
|
|
};
|
|
|
|
rt_int32_t _imxrt_mci_init(void)
|
|
{
|
|
struct rt_mmcsd_host *host;
|
|
struct imxrt_mmcsd *mmcsd;
|
|
|
|
host = mmcsd_alloc_host();
|
|
if (!host)
|
|
{
|
|
return -RT_ERROR;
|
|
}
|
|
|
|
mmcsd = rt_malloc(sizeof(struct imxrt_mmcsd));
|
|
if (!mmcsd)
|
|
{
|
|
rt_kprintf("alloc mci failed\n");
|
|
goto err;
|
|
}
|
|
|
|
rt_memset(mmcsd, 0, sizeof(struct imxrt_mmcsd));
|
|
mmcsd->usdhc_host.base = USDHC1;
|
|
mmcsd->usdhc_div = kCLOCK_Usdhc1Div;
|
|
mmcsd->usdhc_adma2_table = g_usdhcAdma2Table;
|
|
|
|
host->ops = &ops;
|
|
host->freq_min = 375000;
|
|
host->freq_max = 25000000;
|
|
host->valid_ocr = VDD_32_33 | VDD_33_34;
|
|
host->flags = MMCSD_BUSWIDTH_4 | MMCSD_MUTBLKWRITE | \
|
|
MMCSD_SUP_HIGHSPEED | MMCSD_SUP_SDIO_IRQ;
|
|
host->max_seg_size = 65535;
|
|
host->max_dma_segs = 2;
|
|
host->max_blk_size = 512;
|
|
host->max_blk_count = 4096;
|
|
|
|
mmcsd->host = host;
|
|
|
|
_mmcsd_clk_init(mmcsd);
|
|
_mmcsd_isr_init(mmcsd);
|
|
_mmcsd_gpio_init(mmcsd);
|
|
_mmcsd_host_init(mmcsd);
|
|
|
|
host->private_data = mmcsd;
|
|
|
|
mmcsd_change(host);
|
|
|
|
return 0;
|
|
|
|
err:
|
|
mmcsd_free_host(host);
|
|
|
|
return -RT_ENOMEM;
|
|
}
|
|
|
|
int imxrt_mci_init(void)
|
|
{
|
|
/* initilize sd card */
|
|
_imxrt_mci_init();
|
|
|
|
return 0;
|
|
}
|
|
INIT_DEVICE_EXPORT(imxrt_mci_init);
|