libs/rt-thread
libs
/
rt-thread
4
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
rt-thread/bsp/gd32450z-eval/Libraries/GD32F4xx_standard_peripheral/Source/gd32f4xx_rtc.c

1296 lines
45 KiB
C
Raw Blame History

/*!
\file gd32f4xx_rtc.c
\brief RTC driver
\version 2016-08-15, V1.0.0, firmware for GD32F4xx
\version 2018-12-12, V2.0.0, firmware for GD32F4xx
\version 2020-09-30, V2.1.0, firmware for GD32F4xx
*/
/*
Copyright (c) 2020, GigaDevice Semiconductor Inc.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this
list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution.
3. Neither the name of the copyright holder nor the names of its contributors
may be used to endorse or promote products derived from this software without
specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE.
*/
#include "gd32f4xx_rtc.h"
/* RTC timeout value */
#define RTC_WTWF_TIMEOUT ((uint32_t)0x00004000U) /*!< wakeup timer can be write flag timeout */
#define RTC_INITM_TIMEOUT ((uint32_t)0x00004000U) /*!< initialization state flag timeout */
#define RTC_RSYNF_TIMEOUT ((uint32_t)0x00008000U) /*!< register synchronization flag timeout */
#define RTC_HRFC_TIMEOUT ((uint32_t)0x20000000U) /*!< recalibration pending flag timeout */
#define RTC_SHIFTCTL_TIMEOUT ((uint32_t)0x00001000U) /*!< shift function operation pending flag timeout */
#define RTC_ALRMXWF_TIMEOUT ((uint32_t)0x00008000U) /*!< alarm configuration can be write flag timeout */
/*!
\brief reset most of the RTC registers
\param[in] none
\param[out] none
\retval ErrStatus: ERROR or SUCCESS
*/
ErrStatus rtc_deinit(void)
{
ErrStatus error_status = ERROR;
volatile uint32_t time_index = RTC_WTWF_TIMEOUT;
uint32_t flag_status = RESET;
/* RTC_TAMP register is not under write protection */
RTC_TAMP = RTC_REGISTER_RESET;
/* disable the write protection */
RTC_WPK = RTC_UNLOCK_KEY1;
RTC_WPK = RTC_UNLOCK_KEY2;
/* enter init mode */
error_status = rtc_init_mode_enter();
if(ERROR != error_status){
/* reset RTC_CTL register, but RTC_CTL[2<><32>0] */
RTC_CTL &= (RTC_REGISTER_RESET | RTC_CTL_WTCS);
/* before reset RTC_TIME and RTC_DATE, BPSHAD bit in RTC_CTL should be reset as the condition.
in order to read calendar from shadow register, not the real registers being reset */
RTC_TIME = RTC_REGISTER_RESET;
RTC_DATE = RTC_DATE_RESET;
RTC_PSC = RTC_PSC_RESET;
/* only when RTC_CTL_WTEN=0 and RTC_STAT_WTWF=1 can write RTC_CTL[2<><32>0] */
/* wait until the WTWF flag to be set */
do{
flag_status = RTC_STAT & RTC_STAT_WTWF;
}while((--time_index > 0U) && ((uint32_t)RESET == flag_status));
if ((uint32_t)RESET == flag_status){
error_status = ERROR;
}else{
RTC_CTL &= RTC_REGISTER_RESET;
RTC_WUT = RTC_WUT_RESET;
RTC_COSC = RTC_REGISTER_RESET;
/* to write RTC_ALRMxSS register, ALRMxEN bit in RTC_CTL register should be reset as the condition */
RTC_ALRM0TD = RTC_REGISTER_RESET;
RTC_ALRM1TD = RTC_REGISTER_RESET;
RTC_ALRM0SS = RTC_REGISTER_RESET;
RTC_ALRM1SS = RTC_REGISTER_RESET;
/* reset RTC_STAT register, also exit init mode.
at the same time, RTC_STAT_SOPF bit is reset, as the condition to reset RTC_SHIFTCTL register later */
RTC_STAT = RTC_STAT_RESET;
/* reset RTC_SHIFTCTL and RTC_HRFC register, this can be done without the init mode */
RTC_SHIFTCTL = RTC_REGISTER_RESET;
RTC_HRFC = RTC_REGISTER_RESET;
error_status = rtc_register_sync_wait();
}
}
/* enable the write protection */
RTC_WPK = RTC_LOCK_KEY;
return error_status;
}
/*!
\brief initialize RTC registers
\param[in] rtc_initpara_struct: pointer to a rtc_parameter_struct structure which contains
parameters for initialization of the rtc peripheral
members of the structure and the member values are shown as below:
year: 0x0 - 0x99(BCD format)
month: RTC_JAN, RTC_FEB, RTC_MAR, RTC_APR, RTC_MAY, RTC_JUN,
RTC_JUL, RTC_AUG, RTC_SEP, RTC_OCT, RTC_NOV, RTC_DEC
date: 0x1 - 0x31(BCD format)
day_of_week: RTC_MONDAY, RTC_TUESDAY, RTC_WEDSDAY, RTC_THURSDAY
RTC_FRIDAY, RTC_SATURDAY, RTC_SUNDAY
hour: 0x0 - 0x12(BCD format) or 0x0 - 0x23(BCD format) depending on the rtc_display_format chose
minute: 0x0 - 0x59(BCD format)
second: 0x0 - 0x59(BCD format)
factor_asyn: 0x0 - 0x7F
factor_syn: 0x0 - 0x7FFF
am_pm: RTC_AM, RTC_PM
display_format: RTC_24HOUR, RTC_12HOUR
\param[out] none
\retval ErrStatus: ERROR or SUCCESS
*/
ErrStatus rtc_init(rtc_parameter_struct* rtc_initpara_struct)
{
ErrStatus error_status = ERROR;
uint32_t reg_time = 0U, reg_date = 0U;
reg_date = (DATE_YR(rtc_initpara_struct->year) | \
DATE_DOW(rtc_initpara_struct->day_of_week) | \
DATE_MON(rtc_initpara_struct->month) | \
DATE_DAY(rtc_initpara_struct->date));
reg_time = (rtc_initpara_struct->am_pm| \
TIME_HR(rtc_initpara_struct->hour) | \
TIME_MN(rtc_initpara_struct->minute) | \
TIME_SC(rtc_initpara_struct->second));
/* 1st: disable the write protection */
RTC_WPK = RTC_UNLOCK_KEY1;
RTC_WPK = RTC_UNLOCK_KEY2;
/* 2nd: enter init mode */
error_status = rtc_init_mode_enter();
if(ERROR != error_status){
RTC_PSC = (uint32_t)(PSC_FACTOR_A(rtc_initpara_struct->factor_asyn)| \
PSC_FACTOR_S(rtc_initpara_struct->factor_syn));
RTC_TIME = (uint32_t)reg_time;
RTC_DATE = (uint32_t)reg_date;
RTC_CTL &= (uint32_t)(~RTC_CTL_CS);
RTC_CTL |= rtc_initpara_struct->display_format;
/* 3rd: exit init mode */
rtc_init_mode_exit();
/* 4th: wait the RSYNF flag to set */
error_status = rtc_register_sync_wait();
}
/* 5th: enable the write protection */
RTC_WPK = RTC_LOCK_KEY;
return error_status;
}
/*!
\brief enter RTC init mode
\param[in] none
\param[out] none
\retval ErrStatus: ERROR or SUCCESS
*/
ErrStatus rtc_init_mode_enter(void)
{
volatile uint32_t time_index = RTC_INITM_TIMEOUT;
uint32_t flag_status = RESET;
ErrStatus error_status = ERROR;
/* check whether it has been in init mode */
if ((uint32_t)RESET == (RTC_STAT & RTC_STAT_INITF)){
RTC_STAT |= RTC_STAT_INITM;
/* wait until the INITF flag to be set */
do{
flag_status = RTC_STAT & RTC_STAT_INITF;
}while((--time_index > 0U) && ((uint32_t)RESET == flag_status));
if ((uint32_t)RESET != flag_status){
error_status = SUCCESS;
}
}else{
error_status = SUCCESS;
}
return error_status;
}
/*!
\brief exit RTC init mode
\param[in] none
\param[out] none
\retval none
*/
void rtc_init_mode_exit(void)
{
RTC_STAT &= (uint32_t)(~RTC_STAT_INITM);
}
/*!
\brief wait until RTC_TIME and RTC_DATE registers are synchronized with APB clock, and the shadow
registers are updated
\param[in] none
\param[out] none
\retval ErrStatus: ERROR or SUCCESS
*/
ErrStatus rtc_register_sync_wait(void)
{
volatile uint32_t time_index = RTC_RSYNF_TIMEOUT;
uint32_t flag_status = RESET;
ErrStatus error_status = ERROR;
if ((uint32_t)RESET == (RTC_CTL & RTC_CTL_BPSHAD)){
/* disable the write protection */
RTC_WPK = RTC_UNLOCK_KEY1;
RTC_WPK = RTC_UNLOCK_KEY2;
/* firstly clear RSYNF flag */
RTC_STAT &= (uint32_t)(~RTC_STAT_RSYNF);
/* wait until RSYNF flag to be set */
do{
flag_status = RTC_STAT & RTC_STAT_RSYNF;
}while((--time_index > 0U) && ((uint32_t)RESET == flag_status));
if ((uint32_t)RESET != flag_status){
error_status = SUCCESS;
}
/* enable the write protection */
RTC_WPK = RTC_LOCK_KEY;
}else{
error_status = SUCCESS;
}
return error_status;
}
/*!
\brief get current time and date
\param[in] none
\param[out] rtc_initpara_struct: pointer to a rtc_parameter_struct structure which contains
parameters for initialization of the rtc peripheral
members of the structure and the member values are shown as below:
year: 0x0 - 0x99(BCD format)
month: RTC_JAN, RTC_FEB, RTC_MAR, RTC_APR, RTC_MAY, RTC_JUN,
RTC_JUL, RTC_AUG, RTC_SEP, RTC_OCT, RTC_NOV, RTC_DEC
date: 0x1 - 0x31(BCD format)
day_of_week: RTC_MONDAY, RTC_TUESDAY, RTC_WEDSDAY, RTC_THURSDAY
RTC_FRIDAY, RTC_SATURDAY, RTC_SUNDAY
hour: 0x0 - 0x12(BCD format) or 0x0 - 0x23(BCD format) depending on the rtc_display_format chose
minute: 0x0 - 0x59(BCD format)
second: 0x0 - 0x59(BCD format)
factor_asyn: 0x0 - 0x7F
factor_syn: 0x0 - 0x7FFF
am_pm: RTC_AM, RTC_PM
display_format: RTC_24HOUR, RTC_12HOUR
\retval none
*/
void rtc_current_time_get(rtc_parameter_struct* rtc_initpara_struct)
{
uint32_t temp_tr = 0U, temp_dr = 0U, temp_pscr = 0U, temp_ctlr = 0U;
temp_tr = (uint32_t)RTC_TIME;
temp_dr = (uint32_t)RTC_DATE;
temp_pscr = (uint32_t)RTC_PSC;
temp_ctlr = (uint32_t)RTC_CTL;
/* get current time and construct rtc_parameter_struct structure */
rtc_initpara_struct->year = (uint8_t)GET_DATE_YR(temp_dr);
rtc_initpara_struct->month = (uint8_t)GET_DATE_MON(temp_dr);
rtc_initpara_struct->date = (uint8_t)GET_DATE_DAY(temp_dr);
rtc_initpara_struct->day_of_week = (uint8_t)GET_DATE_DOW(temp_dr);
rtc_initpara_struct->hour = (uint8_t)GET_TIME_HR(temp_tr);
rtc_initpara_struct->minute = (uint8_t)GET_TIME_MN(temp_tr);
rtc_initpara_struct->second = (uint8_t)GET_TIME_SC(temp_tr);
rtc_initpara_struct->factor_asyn = (uint16_t)GET_PSC_FACTOR_A(temp_pscr);
rtc_initpara_struct->factor_syn = (uint16_t)GET_PSC_FACTOR_S(temp_pscr);
rtc_initpara_struct->am_pm = (uint32_t)(temp_pscr & RTC_TIME_PM);
rtc_initpara_struct->display_format = (uint32_t)(temp_ctlr & RTC_CTL_CS);
}
/*!
\brief get current subsecond value
\param[in] none
\param[out] none
\retval current subsecond value
*/
uint32_t rtc_subsecond_get(void)
{
uint32_t reg = 0U;
/* if BPSHAD bit is reset, reading RTC_SS will lock RTC_TIME and RTC_DATE automatically */
reg = (uint32_t)RTC_SS;
/* read RTC_DATE to unlock the 3 shadow registers */
(void) (RTC_DATE);
return reg;
}
/*!
\brief configure RTC alarm
\param[in] rtc_alarm: RTC_ALARM0 or RTC_ALARM1
\param[in] rtc_alarm_time: pointer to a rtc_alarm_struct structure which contains
parameters for RTC alarm configuration
members of the structure and the member values are shown as below:
alarm_mask: RTC_ALARM_NONE_MASK, RTC_ALARM_DATE_MASK, RTC_ALARM_HOUR_MASK
RTC_ALARM_MINUTE_MASK, RTC_ALARM_SECOND_MASK, RTC_ALARM_ALL_MASK
weekday_or_date: RTC_ALARM_DATE_SELECTED, RTC_ALARM_WEEKDAY_SELECTED
alarm_day: 1) 0x1 - 0x31(BCD format) if RTC_ALARM_DATE_SELECTED is set
2) RTC_MONDAY, RTC_TUESDAY, RTC_WEDSDAY, RTC_THURSDAY, RTC_FRIDAY,
RTC_SATURDAY, RTC_SUNDAY if RTC_ALARM_WEEKDAY_SELECTED is set
alarm_hour: 0x0 - 0x12(BCD format) or 0x0 - 0x23(BCD format) depending on the rtc_display_format
alarm_minute: 0x0 - 0x59(BCD format)
alarm_second: 0x0 - 0x59(BCD format)
am_pm: RTC_AM, RTC_PM
\param[out] none
\retval none
*/
void rtc_alarm_config(uint8_t rtc_alarm, rtc_alarm_struct* rtc_alarm_time)
{
uint32_t reg_alrmtd = 0U;
reg_alrmtd =(rtc_alarm_time->alarm_mask | \
rtc_alarm_time->weekday_or_date | \
rtc_alarm_time->am_pm | \
ALRMTD_DAY(rtc_alarm_time->alarm_day) | \
ALRMTD_HR(rtc_alarm_time->alarm_hour) | \
ALRMTD_MN(rtc_alarm_time->alarm_minute) | \
ALRMTD_SC(rtc_alarm_time->alarm_second));
/* disable the write protection */
RTC_WPK = RTC_UNLOCK_KEY1;
RTC_WPK = RTC_UNLOCK_KEY2;
if(RTC_ALARM0 == rtc_alarm){
RTC_ALRM0TD = (uint32_t)reg_alrmtd;
}else{
RTC_ALRM1TD = (uint32_t)reg_alrmtd;
}
/* enable the write protection */
RTC_WPK = RTC_LOCK_KEY;
}
/*!
\brief configure subsecond of RTC alarm
\param[in] rtc_alarm: RTC_ALARM0 or RTC_ALARM1
\param[in] mask_subsecond: alarm subsecond mask
\arg RTC_MASKSSC_0_14: mask alarm subsecond configuration
\arg RTC_MASKSSC_1_14: mask RTC_ALRMXSS_SSC[14:1], and RTC_ALRMXSS_SSC[0] is to be compared
\arg RTC_MASKSSC_2_14: mask RTC_ALRMXSS_SSC[14:2], and RTC_ALRMXSS_SSC[1:0] is to be compared
\arg RTC_MASKSSC_3_14: mask RTC_ALRMXSS_SSC[14:3], and RTC_ALRMXSS_SSC[2:0] is to be compared
\arg RTC_MASKSSC_4_14: mask RTC_ALRMXSS_SSC[14:4]], and RTC_ALRMXSS_SSC[3:0] is to be compared
\arg RTC_MASKSSC_5_14: mask RTC_ALRMXSS_SSC[14:5], and RTC_ALRMXSS_SSC[4:0] is to be compared
\arg RTC_MASKSSC_6_14: mask RTC_ALRMXSS_SSC[14:6], and RTC_ALRMXSS_SSC[5:0] is to be compared
\arg RTC_MASKSSC_7_14: mask RTC_ALRMXSS_SSC[14:7], and RTC_ALRMXSS_SSC[6:0] is to be compared
\arg RTC_MASKSSC_8_14: mask RTC_ALRMXSS_SSC[14:8], and RTC_ALRMXSS_SSC[7:0] is to be compared
\arg RTC_MASKSSC_9_14: mask RTC_ALRMXSS_SSC[14:9], and RTC_ALRMXSS_SSC[8:0] is to be compared
\arg RTC_MASKSSC_10_14: mask RTC_ALRMXSS_SSC[14:10], and RTC_ALRMXSS_SSC[9:0] is to be compared
\arg RTC_MASKSSC_11_14: mask RTC_ALRMXSS_SSC[14:11], and RTC_ALRMXSS_SSC[10:0] is to be compared
\arg RTC_MASKSSC_12_14: mask RTC_ALRMXSS_SSC[14:12], and RTC_ALRMXSS_SSC[11:0] is to be compared
\arg RTC_MASKSSC_13_14: mask RTC_ALRMXSS_SSC[14:13], and RTC_ALRMXSS_SSC[12:0] is to be compared
\arg RTC_MASKSSC_14: mask RTC_ALRMXSS_SSC[14], and RTC_ALRMXSS_SSC[13:0] is to be compared
\arg RTC_MASKSSC_NONE: mask none, and RTC_ALRMXSS_SSC[14:0] is to be compared
\param[in] subsecond: alarm subsecond value(0x000 - 0x7FFF)
\param[out] none
\retval none
*/
void rtc_alarm_subsecond_config(uint8_t rtc_alarm, uint32_t mask_subsecond, uint32_t subsecond)
{
/* disable the write protection */
RTC_WPK = RTC_UNLOCK_KEY1;
RTC_WPK = RTC_UNLOCK_KEY2;
if(RTC_ALARM0 == rtc_alarm){
RTC_ALRM0SS = mask_subsecond | subsecond;
}else{
RTC_ALRM1SS = mask_subsecond | subsecond;
}
/* enable the write protection */
RTC_WPK = RTC_LOCK_KEY;
}
/*!
\brief get RTC alarm
\param[in] rtc_alarm: RTC_ALARM0 or RTC_ALARM1
\param[out] rtc_alarm_time: pointer to a rtc_alarm_struct structure which contains
parameters for RTC alarm configuration
members of the structure and the member values are shown as below:
alarm_mask: RTC_ALARM_NONE_MASK, RTC_ALARM_DATE_MASK, RTC_ALARM_HOUR_MASK
RTC_ALARM_MINUTE_MASK, RTC_ALARM_SECOND_MASK, RTC_ALARM_ALL_MASK
weekday_or_date: RTC_ALARM_DATE_SELECTED, RTC_ALARM_WEEKDAY_SELECTED
alarm_day: 1) 0x1 - 0x31(BCD format) if RTC_ALARM_DATE_SELECTED is set
2) RTC_MONDAY, RTC_TUESDAY, RTC_WEDSDAY, RTC_THURSDAY, RTC_FRIDAY,
RTC_SATURDAY, RTC_SUNDAY if RTC_ALARM_WEEKDAY_SELECTED is set
alarm_hour: 0x0 - 0x12(BCD format) or 0x0 - 0x23(BCD format) depending on the rtc_display_format
alarm_minute: 0x0 - 0x59(BCD format)
alarm_second: 0x0 - 0x59(BCD format)
am_pm: RTC_AM, RTC_PM
\retval none
*/
void rtc_alarm_get(uint8_t rtc_alarm, rtc_alarm_struct* rtc_alarm_time)
{
uint32_t reg_alrmtd = 0U;
/* get the value of RTC_ALRM0TD register */
if(RTC_ALARM0 == rtc_alarm){
reg_alrmtd = RTC_ALRM0TD;
}else{
reg_alrmtd = RTC_ALRM1TD;
}
/* get alarm parameters and construct the rtc_alarm_struct structure */
rtc_alarm_time->alarm_mask = reg_alrmtd & RTC_ALARM_ALL_MASK;
rtc_alarm_time->am_pm = (uint32_t)(reg_alrmtd & RTC_ALRMXTD_PM);
rtc_alarm_time->weekday_or_date = (uint32_t)(reg_alrmtd & RTC_ALRMXTD_DOWS);
rtc_alarm_time->alarm_day = (uint8_t)GET_ALRMTD_DAY(reg_alrmtd);
rtc_alarm_time->alarm_hour = (uint8_t)GET_ALRMTD_HR(reg_alrmtd);
rtc_alarm_time->alarm_minute = (uint8_t)GET_ALRMTD_MN(reg_alrmtd);
rtc_alarm_time->alarm_second = (uint8_t)GET_ALRMTD_SC(reg_alrmtd);
}
/*!
\brief get RTC alarm subsecond
\param[in] rtc_alarm: RTC_ALARM0 or RTC_ALARM1
\param[out] none
\retval RTC alarm subsecond value
*/
uint32_t rtc_alarm_subsecond_get(uint8_t rtc_alarm)
{
if(RTC_ALARM0 == rtc_alarm){
return ((uint32_t)(RTC_ALRM0SS & RTC_ALRM0SS_SSC));
}else{
return ((uint32_t)(RTC_ALRM1SS & RTC_ALRM1SS_SSC));
}
}
/*!
\brief enable RTC alarm
\param[in] rtc_alarm: RTC_ALARM0 or RTC_ALARM1
\param[out] none
\retval none
*/
void rtc_alarm_enable(uint8_t rtc_alarm)
{
/* disable the write protection */
RTC_WPK = RTC_UNLOCK_KEY1;
RTC_WPK = RTC_UNLOCK_KEY2;
if(RTC_ALARM0 == rtc_alarm){
RTC_CTL |= RTC_CTL_ALRM0EN;
}else{
RTC_CTL |= RTC_CTL_ALRM1EN;
}
/* enable the write protection */
RTC_WPK = RTC_LOCK_KEY;
}
/*!
\brief disable RTC alarm
\param[in] rtc_alarm: RTC_ALARM0 or RTC_ALARM1
\param[out] none
\retval ErrStatus: ERROR or SUCCESS
*/
ErrStatus rtc_alarm_disable(uint8_t rtc_alarm)
{
volatile uint32_t time_index = RTC_ALRMXWF_TIMEOUT;
ErrStatus error_status = ERROR;
uint32_t flag_status = RESET;
/* disable the write protection */
RTC_WPK = RTC_UNLOCK_KEY1;
RTC_WPK = RTC_UNLOCK_KEY2;
/* clear the state of alarm */
if(RTC_ALARM0 == rtc_alarm){
RTC_CTL &= (uint32_t)(~RTC_CTL_ALRM0EN);
/* wait until ALRM0WF flag to be set after the alarm is disabled */
do{
flag_status = RTC_STAT & RTC_STAT_ALRM0WF;
}while((--time_index > 0U) && ((uint32_t)RESET == flag_status));
}else{
RTC_CTL &= (uint32_t)(~RTC_CTL_ALRM1EN);
/* wait until ALRM1WF flag to be set after the alarm is disabled */
do{
flag_status = RTC_STAT & RTC_STAT_ALRM1WF;
}while((--time_index > 0U) && ((uint32_t)RESET == flag_status));
}
if ((uint32_t)RESET != flag_status){
error_status = SUCCESS;
}
/* enable the write protection */
RTC_WPK = RTC_LOCK_KEY;
return error_status;
}
/*!
\brief enable RTC time-stamp
\param[in] edge: specify which edge to detect of time-stamp
\arg RTC_TIMESTAMP_RISING_EDGE: rising edge is valid event edge for timestamp event
\arg RTC_TIMESTAMP_FALLING_EDGE: falling edge is valid event edge for timestamp event
\param[out] none
\retval none
*/
void rtc_timestamp_enable(uint32_t edge)
{
uint32_t reg_ctl = 0U;
/* clear the bits to be configured in RTC_CTL */
reg_ctl = (uint32_t)(RTC_CTL & (uint32_t)(~(RTC_CTL_TSEG | RTC_CTL_TSEN)));
/* new configuration */
reg_ctl |= (uint32_t)(edge | RTC_CTL_TSEN);
/* disable the write protection */
RTC_WPK = RTC_UNLOCK_KEY1;
RTC_WPK = RTC_UNLOCK_KEY2;
RTC_CTL = (uint32_t)reg_ctl;
/* enable the write protection */
RTC_WPK = RTC_LOCK_KEY;
}
/*!
\brief disable RTC time-stamp
\param[in] none
\param[out] none
\retval none
*/
void rtc_timestamp_disable(void)
{
/* disable the write protection */
RTC_WPK = RTC_UNLOCK_KEY1;
RTC_WPK = RTC_UNLOCK_KEY2;
/* clear the TSEN bit */
RTC_CTL &= (uint32_t)(~ RTC_CTL_TSEN);
/* enable the write protection */
RTC_WPK = RTC_LOCK_KEY;
}
/*!
\brief get RTC timestamp time and date
\param[in] none
\param[out] rtc_timestamp: pointer to a rtc_timestamp_struct structure which contains
parameters for RTC time-stamp configuration
members of the structure and the member values are shown as below:
timestamp_month: RTC_JAN, RTC_FEB, RTC_MAR, RTC_APR, RTC_MAY, RTC_JUN,
RTC_JUL, RTC_AUG, RTC_SEP, RTC_OCT, RTC_NOV, RTC_DEC
timestamp_date: 0x1 - 0x31(BCD format)
timestamp_day: RTC_MONDAY, RTC_TUESDAY, RTC_WEDSDAY, RTC_THURSDAY, RTC_FRIDAY,
RTC_SATURDAY, RTC_SUNDAY if RTC_ALARM_WEEKDAY_SELECTED is set
timestamp_hour: 0x0 - 0x12(BCD format) or 0x0 - 0x23(BCD format) depending on the rtc_display_format
timestamp_minute: 0x0 - 0x59(BCD format)
timestamp_second: 0x0 - 0x59(BCD format)
am_pm: RTC_AM, RTC_PM
\retval none
*/
void rtc_timestamp_get(rtc_timestamp_struct* rtc_timestamp)
{
uint32_t temp_tts = 0U, temp_dts = 0U;
/* get the value of time_stamp registers */
temp_tts = (uint32_t)RTC_TTS;
temp_dts = (uint32_t)RTC_DTS;
/* get timestamp time and construct the rtc_timestamp_struct structure */
rtc_timestamp->am_pm = (uint32_t)(temp_tts & RTC_TTS_PM);
rtc_timestamp->timestamp_month = (uint8_t)GET_DTS_MON(temp_dts);
rtc_timestamp->timestamp_date = (uint8_t)GET_DTS_DAY(temp_dts);
rtc_timestamp->timestamp_day = (uint8_t)GET_DTS_DOW(temp_dts);
rtc_timestamp->timestamp_hour = (uint8_t)GET_TTS_HR(temp_tts);
rtc_timestamp->timestamp_minute = (uint8_t)GET_TTS_MN(temp_tts);
rtc_timestamp->timestamp_second = (uint8_t)GET_TTS_SC(temp_tts);
}
/*!
\brief get RTC time-stamp subsecond
\param[in] none
\param[out] none
\retval RTC time-stamp subsecond value
*/
uint32_t rtc_timestamp_subsecond_get(void)
{
return ((uint32_t)RTC_SSTS);
}
/*!
\brief RTC time-stamp mapping
\param[in] rtc_af:
\arg RTC_AF0_TIMESTAMP: RTC_AF0 use for timestamp
\arg RTC_AF1_TIMESTAMP: RTC_AF1 use for timestamp
\param[out] none
\retval none
*/
void rtc_timestamp_pin_map(uint32_t rtc_af)
{
RTC_TAMP &= ~RTC_TAMP_TSSEL;
RTC_TAMP |= rtc_af;
}
/*!
\brief enable RTC tamper
\param[in] rtc_tamper: pointer to a rtc_tamper_struct structure which contains
parameters for RTC tamper configuration
members of the structure and the member values are shown as below:
detecting tamper event can using edge mode or level mode
(1) using edge mode configuration:
tamper_source: RTC_TAMPER0, RTC_TAMPER1
tamper_trigger: RTC_TAMPER_TRIGGER_EDGE_RISING, RTC_TAMPER_TRIGGER_EDGE_FALLING
tamper_filter: RTC_FLT_EDGE
tamper_with_timestamp: DISABLE, ENABLE
(2) using level mode configuration:
tamper_source: RTC_TAMPER0, RTC_TAMPER1
tamper_trigger:RTC_TAMPER_TRIGGER_LEVEL_LOW, RTC_TAMPER_TRIGGER_LEVEL_HIGH
tamper_filter: RTC_FLT_2S, RTC_FLT_4S, RTC_FLT_8S
tamper_sample_frequency: RTC_FREQ_DIV32768, RTC_FREQ_DIV16384, RTC_FREQ_DIV8192,
RTC_FREQ_DIV4096, RTC_FREQ_DIV2048, RTC_FREQ_DIV1024,
RTC_FREQ_DIV512, RTC_FREQ_DIV256
tamper_precharge_enable: DISABLE, ENABLE
tamper_precharge_time: RTC_PRCH_1C, RTC_PRCH_2C, RTC_PRCH_4C, RTC_PRCH_8C
tamper_with_timestamp: DISABLE, ENABLE
\param[out] none
\retval none
*/
void rtc_tamper_enable(rtc_tamper_struct* rtc_tamper)
{
/* disable tamper */
RTC_TAMP &= (uint32_t)~(rtc_tamper->tamper_source);
/* tamper filter must be used when the tamper source is voltage level detection */
RTC_TAMP &= (uint32_t)~RTC_TAMP_FLT;
/* the tamper source is voltage level detection */
if((uint32_t)(rtc_tamper->tamper_filter) != RTC_FLT_EDGE ){
RTC_TAMP &= (uint32_t)~(RTC_TAMP_DISPU | RTC_TAMP_PRCH | RTC_TAMP_FREQ | RTC_TAMP_FLT);
/* check if the tamper pin need precharge, if need, then configure the precharge time */
if(DISABLE == rtc_tamper->tamper_precharge_enable){
RTC_TAMP |= (uint32_t)RTC_TAMP_DISPU;
}else{
RTC_TAMP |= (uint32_t)(rtc_tamper->tamper_precharge_time);
}
RTC_TAMP |= (uint32_t)(rtc_tamper->tamper_sample_frequency);
RTC_TAMP |= (uint32_t)(rtc_tamper->tamper_filter);
/* configure the tamper trigger */
RTC_TAMP &= ((uint32_t)~((rtc_tamper->tamper_source) << RTC_TAMPER_TRIGGER_POS));
if(RTC_TAMPER_TRIGGER_LEVEL_LOW != rtc_tamper->tamper_trigger){
RTC_TAMP |= (uint32_t)((rtc_tamper->tamper_source)<< RTC_TAMPER_TRIGGER_POS);
}
}else{
/* configure the tamper trigger */
RTC_TAMP &= ((uint32_t)~((rtc_tamper->tamper_source) << RTC_TAMPER_TRIGGER_POS));
if(RTC_TAMPER_TRIGGER_EDGE_RISING != rtc_tamper->tamper_trigger){
RTC_TAMP |= (uint32_t)((rtc_tamper->tamper_source)<< RTC_TAMPER_TRIGGER_POS);
}
}
RTC_TAMP &= (uint32_t)~RTC_TAMP_TPTS;
if(DISABLE != rtc_tamper->tamper_with_timestamp){
/* the tamper event also cause a time-stamp event */
RTC_TAMP |= (uint32_t)RTC_TAMP_TPTS;
}
/* enable tamper */
RTC_TAMP |= (uint32_t)(rtc_tamper->tamper_source);
}
/*!
\brief disable RTC tamper
\param[in] source: specify which tamper source to be disabled
\arg RTC_TAMPER0
\arg RTC_TAMPER1
\param[out] none
\retval none
*/
void rtc_tamper_disable(uint32_t source)
{
/* disable tamper */
RTC_TAMP &= (uint32_t)~source;
}
/*!
\brief RTC tamper0 mapping
\param[in] rtc_af:
\arg RTC_AF0_TAMPER0: RTC_AF0 use for tamper0
\arg RTC_AF1_TAMPER0: RTC_AF1 use for tamper0
\param[out] none
\retval none
*/
void rtc_tamper0_pin_map(uint32_t rtc_af)
{
RTC_TAMP &= ~(RTC_TAMP_TP0EN | RTC_TAMP_TP0SEL);
RTC_TAMP |= rtc_af;
}
/*!
\brief enable specified RTC interrupt
\param[in] interrupt: specify which interrupt source to be enabled
\arg RTC_INT_TIMESTAMP: timestamp interrupt
\arg RTC_INT_ALARM0: alarm0 interrupt
\arg RTC_INT_ALARM1: alarm1 interrupt
\arg RTC_INT_TAMP: tamper detection interrupt
\arg RTC_INT_WAKEUP: wakeup timer interrupt
\param[out] none
\retval none
*/
void rtc_interrupt_enable(uint32_t interrupt)
{
/* disable the write protection */
RTC_WPK = RTC_UNLOCK_KEY1;
RTC_WPK = RTC_UNLOCK_KEY2;
/* enable the interrupts in RTC_CTL register */
RTC_CTL |= (uint32_t)(interrupt & (uint32_t)~RTC_TAMP_TPIE);
/* enable the interrupts in RTC_TAMP register */
RTC_TAMP |= (uint32_t)(interrupt & RTC_TAMP_TPIE);
/* enable the write protection */
RTC_WPK = RTC_LOCK_KEY;
}
/*!
\brief disble specified RTC interrupt
\param[in] interrupt: specify which interrupt source to be disabled
\arg RTC_INT_TIMESTAMP: timestamp interrupt
\arg RTC_INT_ALARM0: alarm interrupt
\arg RTC_INT_ALARM1: alarm interrupt
\arg RTC_INT_TAMP: tamper detection interrupt
\arg RTC_INT_WAKEUP: wakeup timer interrupt
\param[out] none
\retval none
*/
void rtc_interrupt_disable(uint32_t interrupt)
{
/* disable the write protection */
RTC_WPK = RTC_UNLOCK_KEY1;
RTC_WPK = RTC_UNLOCK_KEY2;
/* disable the interrupts in RTC_CTL register */
RTC_CTL &= (uint32_t)~(interrupt & (uint32_t)~RTC_TAMP_TPIE);
/* disable the interrupts in RTC_TAMP register */
RTC_TAMP &= (uint32_t)~(interrupt & RTC_TAMP_TPIE);
/* enable the write protection */
RTC_WPK = RTC_LOCK_KEY;
}
/*!
\brief check specified flag
\param[in] flag: specify which flag to check
\arg RTC_STAT_SCP: smooth calibration pending flag
\arg RTC_FLAG_TP1: RTC tamper 1 detected flag
\arg RTC_FLAG_TP0: RTC tamper 0 detected flag
\arg RTC_FLAG_TSOVR: time-stamp overflow flag
\arg RTC_FLAG_TS: time-stamp flag
\arg RTC_FLAG_ALARM0: alarm0 occurs flag
\arg RTC_FLAG_ALARM1: alarm1 occurs flag
\arg RTC_FLAG_WT: wakeup timer occurs flag
\arg RTC_FLAG_INIT: initialization state flag
\arg RTC_FLAG_RSYN: register synchronization flag
\arg RTC_FLAG_YCM: year configuration mark status flag
\arg RTC_FLAG_SOP: shift function operation pending flag
\arg RTC_FLAG_ALRM0W: alarm0 configuration can be write flag
\arg RTC_FLAG_ALRM1W: alarm1 configuration can be write flag
\arg RTC_FLAG_WTW: wakeup timer can be write flag
\param[out] none
\retval FlagStatus: SET or RESET
*/
FlagStatus rtc_flag_get(uint32_t flag)
{
FlagStatus flag_state = RESET;
if ((uint32_t)RESET != (RTC_STAT & flag)){
flag_state = SET;
}
return flag_state;
}
/*!
\brief clear specified flag
\arg RTC_FLAG_TP1: RTC tamper 1 detected flag
\arg RTC_FLAG_TP0: RTC tamper 0 detected flag
\arg RTC_FLAG_TSOVR: time-stamp overflow flag
\arg RTC_FLAG_TS: time-stamp flag
\arg RTC_FLAG_WT: wakeup timer occurs flag
\arg RTC_FLAG_ALARM0: alarm0 occurs flag
\arg RTC_FLAG_ALARM1: alarm1 occurs flag
\arg RTC_FLAG_RSYN: register synchronization flag
\param[out] none
\retval none
*/
void rtc_flag_clear(uint32_t flag)
{
RTC_STAT &= (uint32_t)(~flag);
}
/*!
\brief configure rtc alarm output source
\param[in] source: specify signal to output
\arg RTC_ALARM0_HIGH: when the alarm0 flag is set, the output pin is high
\arg RTC_ALARM0_LOW: when the alarm0 flag is set, the output pin is low
\arg RTC_ALARM1_HIGH: when the alarm1 flag is set, the output pin is high
\arg RTC_ALARM1_LOW: when the alarm1 flag is set, the output pin is low
\arg RTC_WAKEUP_HIGH: when the wakeup flag is set, the output pin is high
\arg RTC_WAKEUP_LOW: when the wakeup flag is set, the output pin is low
\param[in] mode: specify the output pin mode when output alarm signal
\arg RTC_ALARM_OUTPUT_OD: open drain mode
\arg RTC_ALARM_OUTPUT_PP: push pull mode
\param[out] none
\retval none
*/
void rtc_alarm_output_config(uint32_t source, uint32_t mode)
{
/* disable the write protection */
RTC_WPK = RTC_UNLOCK_KEY1;
RTC_WPK = RTC_UNLOCK_KEY2;
RTC_CTL &= ~(RTC_CTL_OS | RTC_CTL_OPOL);
RTC_TAMP &= ~RTC_TAMP_AOT;
RTC_CTL |= (uint32_t)(source);
/* alarm output */
RTC_TAMP |= (uint32_t)(mode);
/* enable the write protection */
RTC_WPK = RTC_LOCK_KEY;
}
/*!
\brief configure rtc calibration output source
\param[in] source: specify signal to output
\arg RTC_CALIBRATION_512HZ: when the LSE freqency is 32768Hz and the RTC_PSC
is the default value, output 512Hz signal
\arg RTC_CALIBRATION_1HZ: when the LSE freqency is 32768Hz and the RTC_PSC
is the default value, output 1Hz signal
\param[out] none
\retval none
*/
void rtc_calibration_output_config(uint32_t source)
{
/* disable the write protection */
RTC_WPK = RTC_UNLOCK_KEY1;
RTC_WPK = RTC_UNLOCK_KEY2;
RTC_CTL &= (uint32_t)~(RTC_CTL_COEN | RTC_CTL_COS);
RTC_CTL |= (uint32_t)(source);
/* enable the write protection */
RTC_WPK = RTC_LOCK_KEY;
}
/*!
\brief adjust the daylight saving time by adding or substracting one hour from the current time
\param[in] operation: hour adjustment operation
\arg RTC_CTL_A1H: add one hour
\arg RTC_CTL_S1H: substract one hour
\param[out] none
\retval none
*/
void rtc_hour_adjust(uint32_t operation)
{
/* disable the write protection */
RTC_WPK = RTC_UNLOCK_KEY1;
RTC_WPK = RTC_UNLOCK_KEY2;
RTC_CTL |= (uint32_t)(operation);
/* enable the write protection */
RTC_WPK = RTC_LOCK_KEY;
}
/*!
\brief adjust RTC second or subsecond value of current time
\param[in] add: add 1s to current time or not
\arg RTC_SHIFT_ADD1S_RESET: no effect
\arg RTC_SHIFT_ADD1S_SET: add 1s to current time
\param[in] minus: number of subsecond to minus from current time(0x0 - 0x7FFF)
\param[out] none
\retval ErrStatus: ERROR or SUCCESS
*/
ErrStatus rtc_second_adjust(uint32_t add, uint32_t minus)
{
volatile uint32_t time_index = RTC_SHIFTCTL_TIMEOUT;
ErrStatus error_status = ERROR;
uint32_t flag_status = RESET;
uint32_t temp=0U;
/* disable the write protection */
RTC_WPK = RTC_UNLOCK_KEY1;
RTC_WPK = RTC_UNLOCK_KEY2;
/* check if a shift operation is ongoing */
do{
flag_status = RTC_STAT & RTC_STAT_SOPF;
}while((--time_index > 0U) && ((uint32_t)RESET != flag_status));
/* check if the function of reference clock detection is disabled */
temp = RTC_CTL & RTC_CTL_REFEN;
if((RESET == flag_status) && (RESET == temp)){
RTC_SHIFTCTL = (uint32_t)(add | SHIFTCTL_SFS(minus));
error_status = rtc_register_sync_wait();
}
/* enable the write protection */
RTC_WPK = RTC_LOCK_KEY;
return error_status;
}
/*!
\brief enable RTC bypass shadow registers function
\param[in] none
\param[out] none
\retval none
*/
void rtc_bypass_shadow_enable(void)
{
/* disable the write protection */
RTC_WPK = RTC_UNLOCK_KEY1;
RTC_WPK = RTC_UNLOCK_KEY2;
RTC_CTL |= RTC_CTL_BPSHAD;
/* enable the write protection */
RTC_WPK = RTC_LOCK_KEY;
}
/*!
\brief disable RTC bypass shadow registers function
\param[in] none
\param[out] none
\retval none
*/
void rtc_bypass_shadow_disable(void)
{
/* disable the write protection */
RTC_WPK = RTC_UNLOCK_KEY1;
RTC_WPK = RTC_UNLOCK_KEY2;
RTC_CTL &= ~RTC_CTL_BPSHAD;
/* enable the write protection */
RTC_WPK = RTC_LOCK_KEY;
}
/*!
\brief enable RTC reference clock detection function
\param[in] none
\param[out] none
\retval ErrStatus: ERROR or SUCCESS
*/
ErrStatus rtc_refclock_detection_enable(void)
{
ErrStatus error_status = ERROR;
/* disable the write protection */
RTC_WPK = RTC_UNLOCK_KEY1;
RTC_WPK = RTC_UNLOCK_KEY2;
/* enter init mode */
error_status = rtc_init_mode_enter();
if(ERROR != error_status){
RTC_CTL |= (uint32_t)RTC_CTL_REFEN;
/* exit init mode */
rtc_init_mode_exit();
}
/* enable the write protection */
RTC_WPK = RTC_LOCK_KEY;
return error_status;
}
/*!
\brief disable RTC reference clock detection function
\param[in] none
\param[out] none
\retval ErrStatus: ERROR or SUCCESS
*/
ErrStatus rtc_refclock_detection_disable(void)
{
ErrStatus error_status = ERROR;
/* disable the write protection */
RTC_WPK = RTC_UNLOCK_KEY1;
RTC_WPK = RTC_UNLOCK_KEY2;
/* enter init mode */
error_status = rtc_init_mode_enter();
if(ERROR != error_status){
RTC_CTL &= (uint32_t)~RTC_CTL_REFEN;
/* exit init mode */
rtc_init_mode_exit();
}
/* enable the write protection */
RTC_WPK = RTC_LOCK_KEY;
return error_status;
}
/*!
\brief enable RTC auto wakeup function
\param[in] none
\param[out] none
\retval none
*/
void rtc_wakeup_enable(void)
{
/* disable the write protection */
RTC_WPK = RTC_UNLOCK_KEY1;
RTC_WPK = RTC_UNLOCK_KEY2;
RTC_CTL |= RTC_CTL_WTEN;
/* enable the write protection */
RTC_WPK = RTC_LOCK_KEY;
}
/*!
\brief disable RTC auto wakeup function
\param[in] none
\param[out] none
\retval ErrStatus: ERROR or SUCCESS
*/
ErrStatus rtc_wakeup_disable(void)
{
ErrStatus error_status = ERROR;
volatile uint32_t time_index = RTC_WTWF_TIMEOUT;
uint32_t flag_status = RESET;
/* disable the write protection */
RTC_WPK = RTC_UNLOCK_KEY1;
RTC_WPK = RTC_UNLOCK_KEY2;
RTC_CTL &= ~RTC_CTL_WTEN;
/* wait until the WTWF flag to be set */
do{
flag_status = RTC_STAT & RTC_STAT_WTWF;
}while((--time_index > 0U) && ((uint32_t)RESET == flag_status));
if ((uint32_t)RESET == flag_status){
error_status = ERROR;
}else{
error_status = SUCCESS;
}
/* enable the write protection */
RTC_WPK = RTC_LOCK_KEY;
return error_status;
}
/*!
\brief set RTC auto wakeup timer clock
\param[in] wakeup_clock:
\arg WAKEUP_RTCCK_DIV16: RTC auto wakeup timer clock is RTC clock divided by 16
\arg WAKEUP_RTCCK_DIV8: RTC auto wakeup timer clock is RTC clock divided by 8
\arg WAKEUP_RTCCK_DIV4: RTC auto wakeup timer clock is RTC clock divided by 4
\arg WAKEUP_RTCCK_DIV2: RTC auto wakeup timer clock is RTC clock divided by 2
\arg WAKEUP_CKSPRE: RTC auto wakeup timer clock is ckspre
\arg WAKEUP_CKSPRE_2EXP16: RTC auto wakeup timer clock is ckspre and wakeup timer add 2exp16
\param[out] none
\retval ErrStatus: ERROR or SUCCESS
*/
ErrStatus rtc_wakeup_clock_set(uint8_t wakeup_clock)
{
ErrStatus error_status = ERROR;
volatile uint32_t time_index = RTC_WTWF_TIMEOUT;
uint32_t flag_status = RESET;
/* disable the write protection */
RTC_WPK = RTC_UNLOCK_KEY1;
RTC_WPK = RTC_UNLOCK_KEY2;
/* only when RTC_CTL_WTEN=0 and RTC_STAT_WTWF=1 can write RTC_CTL[2<><32>0] */
/* wait until the WTWF flag to be set */
do{
flag_status = RTC_STAT & RTC_STAT_WTWF;
}while((--time_index > 0U) && ((uint32_t)RESET == flag_status));
if ((uint32_t)RESET == flag_status){
error_status = ERROR;
}else{
RTC_CTL &= (uint32_t)~ RTC_CTL_WTCS;
RTC_CTL |= (uint32_t)wakeup_clock;
error_status = SUCCESS;
}
/* enable the write protection */
RTC_WPK = RTC_LOCK_KEY;
return error_status;
}
/*!
\brief set wakeup timer value
\param[in] wakeup_timer: 0x0000-0xffff
\param[out] none
\retval ErrStatus: ERROR or SUCCESS
*/
ErrStatus rtc_wakeup_timer_set(uint16_t wakeup_timer)
{
ErrStatus error_status = ERROR;
volatile uint32_t time_index = RTC_WTWF_TIMEOUT;
uint32_t flag_status = RESET;
/* disable the write protection */
RTC_WPK = RTC_UNLOCK_KEY1;
RTC_WPK = RTC_UNLOCK_KEY2;
/* wait until the WTWF flag to be set */
do{
flag_status = RTC_STAT & RTC_STAT_WTWF;
}while((--time_index > 0U) && ((uint32_t)RESET == flag_status));
if ((uint32_t)RESET == flag_status){
error_status = ERROR;
}else{
RTC_WUT = (uint32_t)wakeup_timer;
error_status = SUCCESS;
}
/* enable the write protection */
RTC_WPK = RTC_LOCK_KEY;
return error_status;
}
/*!
\brief get wakeup timer value
\param[in] none
\param[out] none
\retval wakeup timer value
*/
uint16_t rtc_wakeup_timer_get(void)
{
return (uint16_t)RTC_WUT;
}
/*!
\brief configure RTC smooth calibration
\param[in] window: select calibration window
\arg RTC_CALIBRATION_WINDOW_32S: 2exp20 RTCCLK cycles, 32s if RTCCLK = 32768 Hz
\arg RTC_CALIBRATION_WINDOW_16S: 2exp19 RTCCLK cycles, 16s if RTCCLK = 32768 Hz
\arg RTC_CALIBRATION_WINDOW_8S: 2exp18 RTCCLK cycles, 8s if RTCCLK = 32768 Hz
\param[in] plus: add RTC clock or not
\arg RTC_CALIBRATION_PLUS_SET: add one RTC clock every 2048 rtc clock
\arg RTC_CALIBRATION_PLUS_RESET: no effect
\param[in] minus: the RTC clock to minus during the calibration window(0x0 - 0x1FF)
\param[out] none
\retval ErrStatus: ERROR or SUCCESS
*/
ErrStatus rtc_smooth_calibration_config(uint32_t window, uint32_t plus, uint32_t minus)
{
volatile uint32_t time_index = RTC_HRFC_TIMEOUT;
ErrStatus error_status = ERROR;
uint32_t flag_status = RESET;
/* disable the write protection */
RTC_WPK = RTC_UNLOCK_KEY1;
RTC_WPK = RTC_UNLOCK_KEY2;
/* check if a smooth calibration operation is ongoing */
do{
flag_status = RTC_STAT & RTC_STAT_SCPF;
}while((--time_index > 0U) && ((uint32_t)RESET != flag_status));
if((uint32_t)RESET == flag_status){
RTC_HRFC = (uint32_t)(window | plus | HRFC_CMSK(minus));
error_status = SUCCESS;
}
/* enable the write protection */
RTC_WPK = RTC_LOCK_KEY;
return error_status;
}
/*!
\brief enable RTC coarse calibration
\param[in] none
\param[out] none
\retval ErrStatus: ERROR or SUCCESS
*/
ErrStatus rtc_coarse_calibration_enable(void)
{
ErrStatus error_status = ERROR;
/* disable the write protection */
RTC_WPK = RTC_UNLOCK_KEY1;
RTC_WPK = RTC_UNLOCK_KEY2;
/* enter init mode */
error_status = rtc_init_mode_enter();
if(ERROR != error_status){
RTC_CTL |= (uint32_t)RTC_CTL_CCEN;
/* exit init mode */
rtc_init_mode_exit();
}
/* enable the write protection */
RTC_WPK = RTC_LOCK_KEY;
return error_status;
}
/*!
\brief disable RTC coarse calibration
\param[in] none
\param[out] none
\retval ErrStatus: ERROR or SUCCESS
*/
ErrStatus rtc_coarse_calibration_disable(void)
{
ErrStatus error_status = ERROR;
/* disable the write protection */
RTC_WPK = RTC_UNLOCK_KEY1;
RTC_WPK = RTC_UNLOCK_KEY2;
/* enter init mode */
error_status = rtc_init_mode_enter();
if(ERROR != error_status){
RTC_CTL &= (uint32_t)~RTC_CTL_CCEN;
/* exit init mode */
rtc_init_mode_exit();
}
/* enable the write protection */
RTC_WPK = RTC_LOCK_KEY;
return error_status;
}
/*!
\brief config coarse calibration direction and step
\param[in] direction: CALIB_INCREASE or CALIB_DECREASE
\param[in] step: 0x00-0x1F
COSD=0:
0x00:+0 PPM
0x01:+4 PPM
0x02:+8 PPM
....
0x1F:+126 PPM
COSD=1:
0x00:-0 PPM
0x01:-2 PPM
0x02:-4 PPM
....
0x1F:-63 PPM
\param[out] none
\retval ErrStatus: ERROR or SUCCESS
*/
ErrStatus rtc_coarse_calibration_config(uint8_t direction, uint8_t step)
{
ErrStatus error_status = ERROR;
/* disable the write protection */
RTC_WPK = RTC_UNLOCK_KEY1;
RTC_WPK = RTC_UNLOCK_KEY2;
/* enter init mode */
error_status = rtc_init_mode_enter();
if(ERROR != error_status){
if(CALIB_DECREASE == direction){
RTC_COSC |= (uint32_t)RTC_COSC_COSD;
}else{
RTC_COSC &= (uint32_t)~RTC_COSC_COSD;
}
RTC_COSC &= ~RTC_COSC_COSS;
RTC_COSC |= (uint32_t)((uint32_t)step & 0x1FU);
/* exit init mode */
rtc_init_mode_exit();
}
/* enable the write protection */
RTC_WPK = RTC_LOCK_KEY;
return error_status;
}
View Git Blame Copy Permalink